diff options
Diffstat (limited to 'drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c')
-rw-r--r-- | drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 311 |
1 files changed, 311 insertions, 0 deletions
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c new file mode 100644 index 000000000..85fb11de4 --- /dev/null +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2016-2017 Hisilicon Limited. + +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/marvell_phy.h> + +#include "hclge_cmd.h" +#include "hclge_main.h" +#include "hclge_mdio.h" + +enum hclge_mdio_c22_op_seq { + HCLGE_MDIO_C22_WRITE = 1, + HCLGE_MDIO_C22_READ = 2 +}; + +#define HCLGE_MDIO_CTRL_START_B 0 +#define HCLGE_MDIO_CTRL_ST_S 1 +#define HCLGE_MDIO_CTRL_ST_M (0x3 << HCLGE_MDIO_CTRL_ST_S) +#define HCLGE_MDIO_CTRL_OP_S 3 +#define HCLGE_MDIO_CTRL_OP_M (0x3 << HCLGE_MDIO_CTRL_OP_S) + +#define HCLGE_MDIO_PHYID_S 0 +#define HCLGE_MDIO_PHYID_M (0x1f << HCLGE_MDIO_PHYID_S) + +#define HCLGE_MDIO_PHYREG_S 0 +#define HCLGE_MDIO_PHYREG_M (0x1f << HCLGE_MDIO_PHYREG_S) + +#define HCLGE_MDIO_STA_B 0 + +struct hclge_mdio_cfg_cmd { + u8 ctrl_bit; + u8 phyid; + u8 phyad; + u8 rsvd; + __le16 reserve; + __le16 data_wr; + __le16 data_rd; + __le16 sta; +}; + +static int hclge_mdio_write(struct mii_bus *bus, int phyid, int regnum, + u16 data) +{ + struct hclge_mdio_cfg_cmd *mdio_cmd; + struct hclge_dev *hdev = bus->priv; + struct hclge_desc desc; + int ret; + + if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state)) + return -EBUSY; + + hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, false); + + mdio_cmd = (struct hclge_mdio_cfg_cmd *)desc.data; + + hnae3_set_field(mdio_cmd->phyid, HCLGE_MDIO_PHYID_M, + HCLGE_MDIO_PHYID_S, (u32)phyid); + hnae3_set_field(mdio_cmd->phyad, HCLGE_MDIO_PHYREG_M, + HCLGE_MDIO_PHYREG_S, (u32)regnum); + + hnae3_set_bit(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_START_B, 1); + hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_ST_M, + HCLGE_MDIO_CTRL_ST_S, 1); + hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_OP_M, + HCLGE_MDIO_CTRL_OP_S, HCLGE_MDIO_C22_WRITE); + + mdio_cmd->data_wr = cpu_to_le16(data); + + ret = hclge_cmd_send(&hdev->hw, &desc, 1); + if (ret) { + dev_err(&hdev->pdev->dev, + "mdio write fail when sending cmd, status is %d.\n", + ret); + return ret; + } + + return 0; +} + +static int hclge_mdio_read(struct mii_bus *bus, int phyid, int regnum) +{ + struct hclge_mdio_cfg_cmd *mdio_cmd; + struct hclge_dev *hdev = bus->priv; + struct hclge_desc desc; + int ret; + + if (test_bit(HCLGE_COMM_STATE_CMD_DISABLE, &hdev->hw.hw.comm_state)) + return -EBUSY; + + hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MDIO_CONFIG, true); + + mdio_cmd = (struct hclge_mdio_cfg_cmd *)desc.data; + + hnae3_set_field(mdio_cmd->phyid, HCLGE_MDIO_PHYID_M, + HCLGE_MDIO_PHYID_S, (u32)phyid); + hnae3_set_field(mdio_cmd->phyad, HCLGE_MDIO_PHYREG_M, + HCLGE_MDIO_PHYREG_S, (u32)regnum); + + hnae3_set_bit(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_START_B, 1); + hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_ST_M, + HCLGE_MDIO_CTRL_ST_S, 1); + hnae3_set_field(mdio_cmd->ctrl_bit, HCLGE_MDIO_CTRL_OP_M, + HCLGE_MDIO_CTRL_OP_S, HCLGE_MDIO_C22_READ); + + /* Read out phy data */ + ret = hclge_cmd_send(&hdev->hw, &desc, 1); + if (ret) { + dev_err(&hdev->pdev->dev, + "mdio read fail when get data, status is %d.\n", + ret); + return ret; + } + + if (hnae3_get_bit(le16_to_cpu(mdio_cmd->sta), HCLGE_MDIO_STA_B)) { + dev_err(&hdev->pdev->dev, "mdio read data error\n"); + return -EIO; + } + + return le16_to_cpu(mdio_cmd->data_rd); +} + +int hclge_mac_mdio_config(struct hclge_dev *hdev) +{ +#define PHY_INEXISTENT 255 + + struct hclge_mac *mac = &hdev->hw.mac; + struct phy_device *phydev; + struct mii_bus *mdio_bus; + int ret; + + if (hdev->hw.mac.phy_addr == PHY_INEXISTENT) { + dev_info(&hdev->pdev->dev, + "no phy device is connected to mdio bus\n"); + return 0; + } else if (hdev->hw.mac.phy_addr >= PHY_MAX_ADDR) { + dev_err(&hdev->pdev->dev, "phy_addr(%u) is too large.\n", + hdev->hw.mac.phy_addr); + return -EINVAL; + } + + mdio_bus = devm_mdiobus_alloc(&hdev->pdev->dev); + if (!mdio_bus) + return -ENOMEM; + + mdio_bus->name = "hisilicon MII bus"; + mdio_bus->read = hclge_mdio_read; + mdio_bus->write = hclge_mdio_write; + snprintf(mdio_bus->id, MII_BUS_ID_SIZE, "%s-%s", "mii", + dev_name(&hdev->pdev->dev)); + + mdio_bus->parent = &hdev->pdev->dev; + mdio_bus->priv = hdev; + mdio_bus->phy_mask = ~(1 << mac->phy_addr); + ret = mdiobus_register(mdio_bus); + if (ret) { + dev_err(mdio_bus->parent, + "failed to register MDIO bus, ret = %d\n", ret); + return ret; + } + + phydev = mdiobus_get_phy(mdio_bus, mac->phy_addr); + if (!phydev) { + dev_err(mdio_bus->parent, "Failed to get phy device\n"); + mdiobus_unregister(mdio_bus); + return -EIO; + } + + mac->phydev = phydev; + mac->mdio_bus = mdio_bus; + + return 0; +} + +static void hclge_mac_adjust_link(struct net_device *netdev) +{ + struct hnae3_handle *h = *((void **)netdev_priv(netdev)); + struct hclge_vport *vport = hclge_get_vport(h); + struct hclge_dev *hdev = vport->back; + int duplex, speed; + int ret; + + /* When phy link down, do nothing */ + if (netdev->phydev->link == 0) + return; + + speed = netdev->phydev->speed; + duplex = netdev->phydev->duplex; + + ret = hclge_cfg_mac_speed_dup(hdev, speed, duplex, 0); + if (ret) + netdev_err(netdev, "failed to adjust link.\n"); + + ret = hclge_cfg_flowctrl(hdev); + if (ret) + netdev_err(netdev, "failed to configure flow control.\n"); +} + +int hclge_mac_connect_phy(struct hnae3_handle *handle) +{ + struct hclge_vport *vport = hclge_get_vport(handle); + struct hclge_dev *hdev = vport->back; + struct net_device *netdev = hdev->vport[0].nic.netdev; + struct phy_device *phydev = hdev->hw.mac.phydev; + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + int ret; + + if (!phydev) + return 0; + + linkmode_clear_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported); + + phydev->dev_flags |= MARVELL_PHY_LED0_LINK_LED1_ACTIVE; + + ret = phy_connect_direct(netdev, phydev, + hclge_mac_adjust_link, + PHY_INTERFACE_MODE_SGMII); + if (ret) { + netdev_err(netdev, "phy_connect_direct err.\n"); + return ret; + } + + linkmode_copy(mask, hdev->hw.mac.supported); + linkmode_and(phydev->supported, phydev->supported, mask); + linkmode_copy(phydev->advertising, phydev->supported); + + /* supported flag is Pause and Asym Pause, but default advertising + * should be rx on, tx on, so need clear Asym Pause in advertising + * flag + */ + linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising); + + phy_attached_info(phydev); + + return 0; +} + +void hclge_mac_disconnect_phy(struct hnae3_handle *handle) +{ + struct hclge_vport *vport = hclge_get_vport(handle); + struct hclge_dev *hdev = vport->back; + struct phy_device *phydev = hdev->hw.mac.phydev; + + if (!phydev) + return; + + phy_disconnect(phydev); +} + +void hclge_mac_start_phy(struct hclge_dev *hdev) +{ + struct phy_device *phydev = hdev->hw.mac.phydev; + + if (!phydev) + return; + + phy_loopback(phydev, false); + + phy_start(phydev); +} + +void hclge_mac_stop_phy(struct hclge_dev *hdev) +{ + struct net_device *netdev = hdev->vport[0].nic.netdev; + struct phy_device *phydev = netdev->phydev; + + if (!phydev) + return; + + phy_stop(phydev); +} + +u16 hclge_read_phy_reg(struct hclge_dev *hdev, u16 reg_addr) +{ + struct hclge_phy_reg_cmd *req; + struct hclge_desc desc; + int ret; + + hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_PHY_REG, true); + + req = (struct hclge_phy_reg_cmd *)desc.data; + req->reg_addr = cpu_to_le16(reg_addr); + + ret = hclge_cmd_send(&hdev->hw, &desc, 1); + if (ret) + dev_err(&hdev->pdev->dev, + "failed to read phy reg, ret = %d.\n", ret); + + return le16_to_cpu(req->reg_val); +} + +int hclge_write_phy_reg(struct hclge_dev *hdev, u16 reg_addr, u16 val) +{ + struct hclge_phy_reg_cmd *req; + struct hclge_desc desc; + int ret; + + hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_PHY_REG, false); + + req = (struct hclge_phy_reg_cmd *)desc.data; + req->reg_addr = cpu_to_le16(reg_addr); + req->reg_val = cpu_to_le16(val); + + ret = hclge_cmd_send(&hdev->hw, &desc, 1); + if (ret) + dev_err(&hdev->pdev->dev, + "failed to write phy reg, ret = %d.\n", ret); + + return ret; +} |