diff options
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_mbx.h')
| -rw-r--r-- | drivers/net/ethernet/intel/fm10k/fm10k_mbx.h | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h new file mode 100644 index 000000000..56d1abff0 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h @@ -0,0 +1,294 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2013 - 2018 Intel Corporation. */ + +#ifndef _FM10K_MBX_H_ +#define _FM10K_MBX_H_ + +/* forward declaration */ +struct fm10k_mbx_info; + +#include "fm10k_type.h" +#include "fm10k_tlv.h" + +/* PF Mailbox Registers */ +#define FM10K_MBMEM(_n) ((_n) + 0x18000) +#define FM10K_MBMEM_VF(_n, _m) (((_n) * 0x10) + (_m) + 0x18000) +#define FM10K_MBMEM_SM(_n) ((_n) + 0x18400) +#define FM10K_MBMEM_PF(_n) ((_n) + 0x18600) +/* XOR provides means of switching from Tx to Rx FIFO */ +#define FM10K_MBMEM_PF_XOR (FM10K_MBMEM_SM(0) ^ FM10K_MBMEM_PF(0)) +#define FM10K_MBX(_n) ((_n) + 0x18800) +#define FM10K_MBX_REQ 0x00000002 +#define FM10K_MBX_ACK 0x00000004 +#define FM10K_MBX_REQ_INTERRUPT 0x00000008 +#define FM10K_MBX_ACK_INTERRUPT 0x00000010 +#define FM10K_MBX_INTERRUPT_ENABLE 0x00000020 +#define FM10K_MBX_INTERRUPT_DISABLE 0x00000040 +#define FM10K_MBX_GLOBAL_REQ_INTERRUPT 0x00000200 +#define FM10K_MBX_GLOBAL_ACK_INTERRUPT 0x00000400 +#define FM10K_MBICR(_n) ((_n) + 0x18840) +#define FM10K_GMBX 0x18842 + +/* VF Mailbox Registers */ +#define FM10K_VFMBX 0x00010 +#define FM10K_VFMBMEM(_n) ((_n) + 0x00020) +#define FM10K_VFMBMEM_LEN 16 +#define FM10K_VFMBMEM_VF_XOR (FM10K_VFMBMEM_LEN / 2) + +/* Delays/timeouts */ +#define FM10K_MBX_DISCONNECT_TIMEOUT 500 +#define FM10K_MBX_POLL_DELAY 19 +#define FM10K_MBX_INT_DELAY 20 + +/* PF/VF Mailbox state machine + * + * +----------+ connect() +----------+ + * | CLOSED | --------------> | CONNECT | + * +----------+ +----------+ + * ^ ^ | + * | rcv: rcv: | | rcv: + * | Connect Disconnect | | Connect + * | Disconnect Error | | Data + * | | | + * | | V + * +----------+ disconnect() +----------+ + * |DISCONNECT| <-------------- | OPEN | + * +----------+ +----------+ + * + * The diagram above describes the PF/VF mailbox state machine. There + * are four main states to this machine. + * Closed: This state represents a mailbox that is in a standby state + * with interrupts disabled. In this state the mailbox should not + * read the mailbox or write any data. The only means of exiting + * this state is for the system to make the connect() call for the + * mailbox, it will then transition to the connect state. + * Connect: In this state the mailbox is seeking a connection. It will + * post a connect message with no specified destination and will + * wait for a reply from the other side of the mailbox. This state + * is exited when either a connect with the local mailbox as the + * destination is received or when a data message is received with + * a valid sequence number. + * Open: In this state the mailbox is able to transfer data between the local + * entity and the remote. It will fall back to connect in the event of + * receiving either an error message, or a disconnect message. It will + * transition to disconnect on a call to disconnect(); + * Disconnect: In this state the mailbox is attempting to gracefully terminate + * the connection. It will do so at the first point where it knows + * that the remote endpoint is either done sending, or when the + * remote endpoint has fallen back into connect. + */ +enum fm10k_mbx_state { + FM10K_STATE_CLOSED, + FM10K_STATE_CONNECT, + FM10K_STATE_OPEN, + FM10K_STATE_DISCONNECT, +}; + +/* PF/VF Mailbox header format + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Size/Err_no/CRC | Rsvd0 | Head | Tail | Type | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * The layout above describes the format for the header used in the PF/VF + * mailbox. The header is broken out into the following fields: + * Type: There are 4 supported message types + * 0x8: Data header - used to transport message data + * 0xC: Connect header - used to establish connection + * 0xD: Disconnect header - used to tear down a connection + * 0xE: Error header - used to address message exceptions + * Tail: Tail index for local FIFO + * Tail index actually consists of two parts. The MSB of + * the head is a loop tracker, it is 0 on an even numbered + * loop through the FIFO, and 1 on the odd numbered loops. + * To get the actual mailbox offset based on the tail it + * is necessary to add bit 3 to bit 0 and clear bit 3. This + * gives us a valid range of 0x1 - 0xE. + * Head: Head index for remote FIFO + * Head index follows the same format as the tail index. + * Rsvd0: Reserved 0 portion of the mailbox header + * CRC: Running CRC for all data since connect plus current message header + * Size: Maximum message size - Applies only to connect headers + * The maximum message size is provided during connect to avoid + * jamming the mailbox with messages that do not fit. + * Err_no: Error number - Applies only to error headers + * The error number provides an indication of the type of error + * experienced. + */ + +/* macros for retrieving and setting header values */ +#define FM10K_MSG_HDR_MASK(name) \ + ((0x1u << FM10K_MSG_##name##_SIZE) - 1) +#define FM10K_MSG_HDR_FIELD_SET(value, name) \ + (((u32)(value) & FM10K_MSG_HDR_MASK(name)) << FM10K_MSG_##name##_SHIFT) +#define FM10K_MSG_HDR_FIELD_GET(value, name) \ + ((u16)((value) >> FM10K_MSG_##name##_SHIFT) & FM10K_MSG_HDR_MASK(name)) + +/* offsets shared between all headers */ +#define FM10K_MSG_TYPE_SHIFT 0 +#define FM10K_MSG_TYPE_SIZE 4 +#define FM10K_MSG_TAIL_SHIFT 4 +#define FM10K_MSG_TAIL_SIZE 4 +#define FM10K_MSG_HEAD_SHIFT 8 +#define FM10K_MSG_HEAD_SIZE 4 +#define FM10K_MSG_RSVD0_SHIFT 12 +#define FM10K_MSG_RSVD0_SIZE 4 + +/* offsets for data/disconnect headers */ +#define FM10K_MSG_CRC_SHIFT 16 +#define FM10K_MSG_CRC_SIZE 16 + +/* offsets for connect headers */ +#define FM10K_MSG_CONNECT_SIZE_SHIFT 16 +#define FM10K_MSG_CONNECT_SIZE_SIZE 16 + +/* offsets for error headers */ +#define FM10K_MSG_ERR_NO_SHIFT 16 +#define FM10K_MSG_ERR_NO_SIZE 16 + +enum fm10k_msg_type { + FM10K_MSG_DATA = 0x8, + FM10K_MSG_CONNECT = 0xC, + FM10K_MSG_DISCONNECT = 0xD, + FM10K_MSG_ERROR = 0xE, +}; + +/* HNI/SM Mailbox FIFO format + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-----------------------+-------+-----------------------+ + * | Error | Remote Head |Version| Local Tail | + * +-------+-----------------------+-------+-----------------------+ + * | | + * . Local FIFO Data . + * . . + * +-------+-----------------------+-------+-----------------------+ + * + * The layout above describes the format for the FIFOs used by the host + * network interface and the switch manager to communicate messages back + * and forth. Both the HNI and the switch maintain one such FIFO. The + * layout in memory has the switch manager FIFO followed immediately by + * the HNI FIFO. For this reason I am using just the pointer to the + * HNI FIFO in the mailbox ops as the offset between the two is fixed. + * + * The header for the FIFO is broken out into the following fields: + * Local Tail: Offset into FIFO region for next DWORD to write. + * Version: Version info for mailbox, only values of 0/1 are supported. + * Remote Head: Offset into remote FIFO to indicate how much we have read. + * Error: Error indication, values TBD. + */ + +/* version number for switch manager mailboxes */ +#define FM10K_SM_MBX_VERSION 1 +#define FM10K_SM_MBX_FIFO_LEN (FM10K_MBMEM_PF_XOR - 1) + +/* offsets shared between all SM FIFO headers */ +#define FM10K_MSG_SM_TAIL_SHIFT 0 +#define FM10K_MSG_SM_TAIL_SIZE 12 +#define FM10K_MSG_SM_VER_SHIFT 12 +#define FM10K_MSG_SM_VER_SIZE 4 +#define FM10K_MSG_SM_HEAD_SHIFT 16 +#define FM10K_MSG_SM_HEAD_SIZE 12 +#define FM10K_MSG_SM_ERR_SHIFT 28 +#define FM10K_MSG_SM_ERR_SIZE 4 + +/* All error messages returned by mailbox functions + * The value -511 is 0xFE01 in hex. The idea is to order the errors + * from 0xFE01 - 0xFEFF so error codes are easily visible in the mailbox + * messages. This also helps to avoid error number collisions as Linux + * doesn't appear to use error numbers 256 - 511. + */ +#define FM10K_MBX_ERR(_n) ((_n) - 512) +#define FM10K_MBX_ERR_NO_MBX FM10K_MBX_ERR(0x01) +#define FM10K_MBX_ERR_NO_SPACE FM10K_MBX_ERR(0x03) +#define FM10K_MBX_ERR_TAIL FM10K_MBX_ERR(0x05) +#define FM10K_MBX_ERR_HEAD FM10K_MBX_ERR(0x06) +#define FM10K_MBX_ERR_SRC FM10K_MBX_ERR(0x08) +#define FM10K_MBX_ERR_TYPE FM10K_MBX_ERR(0x09) +#define FM10K_MBX_ERR_SIZE FM10K_MBX_ERR(0x0B) +#define FM10K_MBX_ERR_BUSY FM10K_MBX_ERR(0x0C) +#define FM10K_MBX_ERR_RSVD0 FM10K_MBX_ERR(0x0E) +#define FM10K_MBX_ERR_CRC FM10K_MBX_ERR(0x0F) + +#define FM10K_MBX_CRC_SEED 0xFFFF + +struct fm10k_mbx_ops { + s32 (*connect)(struct fm10k_hw *, struct fm10k_mbx_info *); + void (*disconnect)(struct fm10k_hw *, struct fm10k_mbx_info *); + bool (*rx_ready)(struct fm10k_mbx_info *); + bool (*tx_ready)(struct fm10k_mbx_info *, u16); + bool (*tx_complete)(struct fm10k_mbx_info *); + s32 (*enqueue_tx)(struct fm10k_hw *, struct fm10k_mbx_info *, + const u32 *); + s32 (*process)(struct fm10k_hw *, struct fm10k_mbx_info *); + s32 (*register_handlers)(struct fm10k_mbx_info *, + const struct fm10k_msg_data *); +}; + +struct fm10k_mbx_fifo { + u32 *buffer; + u16 head; + u16 tail; + u16 size; +}; + +/* size of buffer to be stored in mailbox for FIFOs */ +#define FM10K_MBX_TX_BUFFER_SIZE 512 +#define FM10K_MBX_RX_BUFFER_SIZE 128 +#define FM10K_MBX_BUFFER_SIZE \ + (FM10K_MBX_TX_BUFFER_SIZE + FM10K_MBX_RX_BUFFER_SIZE) + +/* minimum and maximum message size in dwords */ +#define FM10K_MBX_MSG_MAX_SIZE \ + ((FM10K_MBX_TX_BUFFER_SIZE - 1) & (FM10K_MBX_RX_BUFFER_SIZE - 1)) +#define FM10K_VFMBX_MSG_MTU ((FM10K_VFMBMEM_LEN / 2) - 1) + +#define FM10K_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define FM10K_MBX_INIT_DELAY 500 /* microseconds between retries */ + +struct fm10k_mbx_info { + /* function pointers for mailbox operations */ + struct fm10k_mbx_ops ops; + const struct fm10k_msg_data *msg_data; + + /* message FIFOs */ + struct fm10k_mbx_fifo rx; + struct fm10k_mbx_fifo tx; + + /* delay for handling timeouts */ + u32 timeout; + u32 udelay; + + /* mailbox state info */ + u32 mbx_reg, mbmem_reg, mbx_lock, mbx_hdr; + u16 max_size, mbmem_len; + u16 tail, tail_len, pulled; + u16 head, head_len, pushed; + u16 local, remote; + enum fm10k_mbx_state state; + + /* result of last mailbox test */ + s32 test_result; + + /* statistics */ + u64 tx_busy; + u64 tx_dropped; + u64 tx_messages; + u64 tx_dwords; + u64 tx_mbmem_pulled; + u64 rx_messages; + u64 rx_dwords; + u64 rx_mbmem_pushed; + u64 rx_parse_err; + + /* Buffer to store messages */ + u32 buffer[FM10K_MBX_BUFFER_SIZE]; +}; + +s32 fm10k_pfvf_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *, + const struct fm10k_msg_data *, u8); +s32 fm10k_sm_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *, + const struct fm10k_msg_data *); + +#endif /* _FM10K_MBX_H_ */ |