1 files changed, 313 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
new file mode 100644
index 000000000..644bb54f5
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*******************************************************************************
+  This contains the functions to handle the pci driver.
+
+  Copyright (C) 2011-2012  Vayavya Labs Pvt Ltd
+
+
+  Author: Rayagond Kokatanur <rayagond@vayavyalabs.com>
+  Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/clk-provider.h>
+#include <linux/pci.h>
+#include <linux/dmi.h>
+
+#include "stmmac.h"
+
+struct stmmac_pci_info {
+	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static void common_default_data(struct plat_stmmacenet_data *plat)
+{
+	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
+	plat->has_gmac = 1;
+	plat->force_sf_dma_mode = 1;
+
+	plat->mdio_bus_data->needs_reset = true;
+
+	/* Set default value for multicast hash bins */
+	plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+	/* Set default value for unicast filter entries */
+	plat->unicast_filter_entries = 1;
+
+	/* Set the maxmtu to a default of JUMBO_LEN */
+	plat->maxmtu = JUMBO_LEN;
+
+	/* Set default number of RX and TX queues to use */
+	plat->tx_queues_to_use = 1;
+	plat->rx_queues_to_use = 1;
+
+	/* Disable Priority config by default */
+	plat->tx_queues_cfg[0].use_prio = false;
+	plat->rx_queues_cfg[0].use_prio = false;
+
+	/* Disable RX queues routing by default */
+	plat->rx_queues_cfg[0].pkt_route = 0x0;
+}
+
+static int stmmac_default_data(struct pci_dev *pdev,
+			       struct plat_stmmacenet_data *plat)
+{
+	/* Set common default data first */
+	common_default_data(plat);
+
+	plat->bus_id = 1;
+	plat->phy_addr = 0;
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
+
+	plat->dma_cfg->pbl = 32;
+	plat->dma_cfg->pblx8 = true;
+	/* TODO: AXI */
+
+	return 0;
+}
+
+static const struct stmmac_pci_info stmmac_pci_info = {
+	.setup = stmmac_default_data,
+};
+
+static int snps_gmac5_default_data(struct pci_dev *pdev,
+				   struct plat_stmmacenet_data *plat)
+{
+	int i;
+
+	plat->clk_csr = 5;
+	plat->has_gmac4 = 1;
+	plat->force_sf_dma_mode = 1;
+	plat->tso_en = 1;
+	plat->pmt = 1;
+
+	/* Set default value for multicast hash bins */
+	plat->multicast_filter_bins = HASH_TABLE_SIZE;
+
+	/* Set default value for unicast filter entries */
+	plat->unicast_filter_entries = 1;
+
+	/* Set the maxmtu to a default of JUMBO_LEN */
+	plat->maxmtu = JUMBO_LEN;
+
+	/* Set default number of RX and TX queues to use */
+	plat->tx_queues_to_use = 4;
+	plat->rx_queues_to_use = 4;
+
+	plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
+	for (i = 0; i < plat->tx_queues_to_use; i++) {
+		plat->tx_queues_cfg[i].use_prio = false;
+		plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+		plat->tx_queues_cfg[i].weight = 25;
+		if (i > 0)
+			plat->tx_queues_cfg[i].tbs_en = 1;
+	}
+
+	plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
+	for (i = 0; i < plat->rx_queues_to_use; i++) {
+		plat->rx_queues_cfg[i].use_prio = false;
+		plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
+		plat->rx_queues_cfg[i].pkt_route = 0x0;
+		plat->rx_queues_cfg[i].chan = i;
+	}
+
+	plat->bus_id = 1;
+	plat->phy_addr = -1;
+	plat->phy_interface = PHY_INTERFACE_MODE_GMII;
+
+	plat->dma_cfg->pbl = 32;
+	plat->dma_cfg->pblx8 = true;
+
+	/* Axi Configuration */
+	plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), GFP_KERNEL);
+	if (!plat->axi)
+		return -ENOMEM;
+
+	plat->axi->axi_wr_osr_lmt = 31;
+	plat->axi->axi_rd_osr_lmt = 31;
+
+	plat->axi->axi_fb = false;
+	plat->axi->axi_blen[0] = 4;
+	plat->axi->axi_blen[1] = 8;
+	plat->axi->axi_blen[2] = 16;
+	plat->axi->axi_blen[3] = 32;
+
+	return 0;
+}
+
+static const struct stmmac_pci_info snps_gmac5_pci_info = {
+	.setup = snps_gmac5_default_data,
+};
+
+/**
+ * stmmac_pci_probe
+ *
+ * @pdev: pci device pointer
+ * @id: pointer to table of device id/id's.
+ *
+ * Description: This probing function gets called for all PCI devices which
+ * match the ID table and are not "owned" by other driver yet. This function
+ * gets passed a "struct pci_dev *" for each device whose entry in the ID table
+ * matches the device. The probe functions returns zero when the driver choose
+ * to take "ownership" of the device or an error code(-ve no) otherwise.
+ */
+static int stmmac_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *id)
+{
+	struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
+	struct plat_stmmacenet_data *plat;
+	struct stmmac_resources res;
+	int i;
+	int ret;
+
+	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
+	if (!plat)
+		return -ENOMEM;
+
+	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+					   sizeof(*plat->mdio_bus_data),
+					   GFP_KERNEL);
+	if (!plat->mdio_bus_data)
+		return -ENOMEM;
+
+	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+				     GFP_KERNEL);
+	if (!plat->dma_cfg)
+		return -ENOMEM;
+
+	plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
+					     sizeof(*plat->safety_feat_cfg),
+					     GFP_KERNEL);
+	if (!plat->safety_feat_cfg)
+		return -ENOMEM;
+
+	/* Enable pci device */
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
+			__func__);
+		return ret;
+	}
+
+	/* Get the base address of device */
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		if (pci_resource_len(pdev, i) == 0)
+			continue;
+		ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
+		if (ret)
+			return ret;
+		break;
+	}
+
+	pci_set_master(pdev);
+
+	ret = info->setup(pdev, plat);
+	if (ret)
+		return ret;
+
+	memset(&res, 0, sizeof(res));
+	res.addr = pcim_iomap_table(pdev)[i];
+	res.wol_irq = pdev->irq;
+	res.irq = pdev->irq;
+
+	plat->safety_feat_cfg->tsoee = 1;
+	plat->safety_feat_cfg->mrxpee = 1;
+	plat->safety_feat_cfg->mestee = 1;
+	plat->safety_feat_cfg->mrxee = 1;
+	plat->safety_feat_cfg->mtxee = 1;
+	plat->safety_feat_cfg->epsi = 1;
+	plat->safety_feat_cfg->edpp = 1;
+	plat->safety_feat_cfg->prtyen = 1;
+	plat->safety_feat_cfg->tmouten = 1;
+
+	return stmmac_dvr_probe(&pdev->dev, plat, &res);
+}
+
+/**
+ * stmmac_pci_remove
+ *
+ * @pdev: platform device pointer
+ * Description: this function calls the main to free the net resources
+ * and releases the PCI resources.
+ */
+static void stmmac_pci_remove(struct pci_dev *pdev)
+{
+	int i;
+
+	stmmac_dvr_remove(&pdev->dev);
+
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+		if (pci_resource_len(pdev, i) == 0)
+			continue;
+		pcim_iounmap_regions(pdev, BIT(i));
+		break;
+	}
+}
+
+static int __maybe_unused stmmac_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int ret;
+
+	ret = stmmac_suspend(dev);
+	if (ret)
+		return ret;
+
+	ret = pci_save_state(pdev);
+	if (ret)
+		return ret;
+
+	pci_disable_device(pdev);
+	pci_wake_from_d3(pdev, true);
+	return 0;
+}
+
+static int __maybe_unused stmmac_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int ret;
+
+	pci_restore_state(pdev);
+	pci_set_power_state(pdev, PCI_D0);
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	pci_set_master(pdev);
+
+	return stmmac_resume(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume);
+
+/* synthetic ID, no official vendor */
+#define PCI_VENDOR_ID_STMMAC		0x0700
+
+#define PCI_DEVICE_ID_STMMAC_STMMAC		0x1108
+#define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID		0x7102
+
+static const struct pci_device_id stmmac_id_table[] = {
+	{ PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) },
+	{ PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) },
+	{ PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) },
+	{}
+};
+
+MODULE_DEVICE_TABLE(pci, stmmac_id_table);
+
+static struct pci_driver stmmac_pci_driver = {
+	.name = STMMAC_RESOURCE_NAME,
+	.id_table = stmmac_id_table,
+	.probe = stmmac_pci_probe,
+	.remove = stmmac_pci_remove,
+	.driver         = {
+		.pm     = &stmmac_pm_ops,
+	},
+};
+
+module_pci_driver(stmmac_pci_driver);
+
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
+MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL");