summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/ti/Kconfig')
-rw-r--r--drivers/net/ethernet/ti/Kconfig186
1 files changed, 186 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 000000000..fce06663e
--- /dev/null
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+ bool "Texas Instruments (TI) devices"
+ default y
+ depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3
+ help
+ If you have a network (Ethernet) card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about TI devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+ tristate "TI DaVinci EMAC Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST
+ select TI_DAVINCI_MDIO
+ select PHYLIB
+ select GENERIC_ALLOCATOR
+ help
+ This driver supports TI's DaVinci Ethernet .
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_emac_driver. This is recommended.
+
+config TI_DAVINCI_MDIO
+ tristate "TI DaVinci MDIO Support"
+ depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
+ select PHYLIB
+ select MDIO_BITBANG
+ help
+ This driver supports TI's DaVinci MDIO module.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_mdio. This is recommended.
+
+config TI_CPSW_PHY_SEL
+ bool "TI CPSW Phy mode Selection (DEPRECATED)"
+ default n
+ help
+ This driver supports configuring of the phy mode connected to
+ the CPSW. DEPRECATED: use PHY_TI_GMII_SEL.
+
+config TI_CPSW
+ tristate "TI CPSW Switch Support"
+ depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+ depends on TI_CPTS || !TI_CPTS
+ select TI_DAVINCI_MDIO
+ select MFD_SYSCON
+ select PAGE_POOL
+ select REGMAP
+ imply PHY_TI_GMII_SEL
+ help
+ This driver supports TI's CPSW Ethernet Switch.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cpsw.
+
+config TI_CPSW_SWITCHDEV
+ tristate "TI CPSW Switch Support with switchdev"
+ depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST
+ depends on NET_SWITCHDEV
+ depends on TI_CPTS || !TI_CPTS
+ select PAGE_POOL
+ select TI_DAVINCI_MDIO
+ select MFD_SYSCON
+ select REGMAP
+ select NET_DEVLINK
+ imply PHY_TI_GMII_SEL
+ help
+ This driver supports TI's CPSW Ethernet Switch.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cpsw_new.
+
+config TI_CPTS
+ tristate "TI Common Platform Time Sync (CPTS) Support"
+ depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
+ depends on COMMON_CLK
+ depends on PTP_1588_CLOCK
+ help
+ This driver supports the Common Platform Time Sync unit of
+ the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
+ The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
+ driver offers a PTP Hardware Clock.
+
+config TI_K3_AM65_CPSW_NUSS
+ tristate "TI K3 AM654x/J721E CPSW Ethernet driver"
+ depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER
+ select NET_DEVLINK
+ select TI_DAVINCI_MDIO
+ select PHYLINK
+ imply PHY_TI_GMII_SEL
+ depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS
+ help
+ This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem.
+ The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides
+ Ethernet packet communication for the device: One Ethernet port
+ (port 1) with selectable RGMII and RMII interfaces and an internal
+ Communications Port Programming Interface (CPPI) port (port 0).
+
+ To compile this driver as a module, choose M here: the module
+ will be called ti-am65-cpsw-nuss.
+
+config TI_K3_AM65_CPSW_SWITCHDEV
+ bool "TI K3 AM654x/J721E CPSW Switch mode support"
+ depends on TI_K3_AM65_CPSW_NUSS
+ depends on NET_SWITCHDEV
+ help
+ This enables switchdev support for TI K3 CPSWxG Ethernet
+ Switch. Enable this driver to support hardware switch support for AM65
+ CPSW NUSS driver.
+
+config TI_K3_AM65_CPTS
+ tristate "TI K3 AM65x CPTS"
+ depends on ARCH_K3 && OF
+ depends on PTP_1588_CLOCK
+ help
+ Say y here to support the TI K3 AM65x CPTS with 1588 features such as
+ PTP hardware clock for each CPTS device and network packets
+ timestamping where applicable.
+ Depending on integration CPTS blocks enable compliance with
+ the IEEE 1588-2008 standard for a precision clock synchronization
+ protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn)
+ and PCIe Subsystem Precision Time Measurement (PTM).
+
+config TI_AM65_CPSW_TAS
+ bool "Enable TAS offload in AM65 CPSW"
+ depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS
+ help
+ Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW.
+ AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST)
+ defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the
+ TAS/EST schedule is updated in the Fetch RAM memory of the CPSW.
+
+config TI_KEYSTONE_NETCP
+ tristate "TI Keystone NETCP Core Support"
+ select TI_DAVINCI_MDIO
+ depends on OF
+ depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
+ depends on TI_CPTS || !TI_CPTS
+ help
+ This driver supports TI's Keystone NETCP Core.
+
+ To compile this driver as a module, choose M here: the module
+ will be called keystone_netcp.
+
+config TI_KEYSTONE_NETCP_ETHSS
+ depends on TI_KEYSTONE_NETCP
+ tristate "TI Keystone NETCP Ethernet subsystem Support"
+ help
+
+ To compile this driver as a module, choose M here: the module
+ will be called keystone_netcp_ethss.
+
+config TLAN
+ tristate "TI ThunderLAN support"
+ depends on (PCI || EISA)
+ help
+ If you have a PCI Ethernet network card based on the ThunderLAN chip
+ which is supported by this driver, say Y here.
+
+ Devices currently supported by this driver are Compaq Netelligent,
+ Compaq NetFlex and Olicom cards. Please read the file
+ <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst>
+ for more details.
+
+ To compile this driver as a module, choose M here. The module
+ will be called tlan.
+
+ Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+ tristate "TI AR7 CPMAC Ethernet support"
+ depends on AR7
+ select PHYLIB
+ help
+ TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI