diff options
Diffstat (limited to 'drivers/net/phy/rockchip.c')
| -rw-r--r-- | drivers/net/phy/rockchip.c | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/drivers/net/phy/rockchip.c b/drivers/net/phy/rockchip.c new file mode 100644 index 000000000..bb13e7518 --- /dev/null +++ b/drivers/net/phy/rockchip.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/net/phy/rockchip.c + * + * Driver for ROCKCHIP Ethernet PHYs + * + * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd + * + * David Wu <david.wu@rock-chips.com> + */ + +#include <linux/ethtool.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/netdevice.h> +#include <linux/phy.h> + +#define INTERNAL_EPHY_ID 0x1234d400 + +#define MII_INTERNAL_CTRL_STATUS 17 +#define SMI_ADDR_TSTCNTL 20 +#define SMI_ADDR_TSTREAD1 21 +#define SMI_ADDR_TSTREAD2 22 +#define SMI_ADDR_TSTWRITE 23 +#define MII_SPECIAL_CONTROL_STATUS 31 + +#define MII_AUTO_MDIX_EN BIT(7) +#define MII_MDIX_EN BIT(6) + +#define MII_SPEED_10 BIT(2) +#define MII_SPEED_100 BIT(3) + +#define TSTCNTL_RD (BIT(15) | BIT(10)) +#define TSTCNTL_WR (BIT(14) | BIT(10)) + +#define TSTMODE_ENABLE 0x400 +#define TSTMODE_DISABLE 0x0 + +#define WR_ADDR_A7CFG 0x18 + +static int rockchip_init_tstmode(struct phy_device *phydev) +{ + int ret; + + /* Enable access to Analog and DSP register banks */ + ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE); + if (ret) + return ret; + + ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE); + if (ret) + return ret; + + return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_ENABLE); +} + +static int rockchip_close_tstmode(struct phy_device *phydev) +{ + /* Back to basic register bank */ + return phy_write(phydev, SMI_ADDR_TSTCNTL, TSTMODE_DISABLE); +} + +static int rockchip_integrated_phy_analog_init(struct phy_device *phydev) +{ + int ret; + + ret = rockchip_init_tstmode(phydev); + if (ret) + return ret; + + /* + * Adjust tx amplitude to make sginal better, + * the default value is 0x8. + */ + ret = phy_write(phydev, SMI_ADDR_TSTWRITE, 0xB); + if (ret) + return ret; + ret = phy_write(phydev, SMI_ADDR_TSTCNTL, TSTCNTL_WR | WR_ADDR_A7CFG); + if (ret) + return ret; + + return rockchip_close_tstmode(phydev); +} + +static int rockchip_integrated_phy_config_init(struct phy_device *phydev) +{ + int val, ret; + + /* + * The auto MIDX has linked problem on some board, + * workround to disable auto MDIX. + */ + val = phy_read(phydev, MII_INTERNAL_CTRL_STATUS); + if (val < 0) + return val; + val &= ~MII_AUTO_MDIX_EN; + ret = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val); + if (ret) + return ret; + + return rockchip_integrated_phy_analog_init(phydev); +} + +static void rockchip_link_change_notify(struct phy_device *phydev) +{ + /* + * If mode switch happens from 10BT to 100BT, all DSP/AFE + * registers are set to default values. So any AFE/DSP + * registers have to be re-initialized in this case. + */ + if (phydev->state == PHY_RUNNING && phydev->speed == SPEED_100) { + int ret = rockchip_integrated_phy_analog_init(phydev); + + if (ret) + phydev_err(phydev, "rockchip_integrated_phy_analog_init err: %d.\n", + ret); + } +} + +static int rockchip_set_polarity(struct phy_device *phydev, int polarity) +{ + int reg, err, val; + + /* get the current settings */ + reg = phy_read(phydev, MII_INTERNAL_CTRL_STATUS); + if (reg < 0) + return reg; + + reg &= ~MII_AUTO_MDIX_EN; + val = reg; + switch (polarity) { + case ETH_TP_MDI: + val &= ~MII_MDIX_EN; + break; + case ETH_TP_MDI_X: + val |= MII_MDIX_EN; + break; + case ETH_TP_MDI_AUTO: + case ETH_TP_MDI_INVALID: + default: + return 0; + } + + if (val != reg) { + /* Set the new polarity value in the register */ + err = phy_write(phydev, MII_INTERNAL_CTRL_STATUS, val); + if (err) + return err; + } + + return 0; +} + +static int rockchip_config_aneg(struct phy_device *phydev) +{ + int err; + + err = rockchip_set_polarity(phydev, phydev->mdix); + if (err < 0) + return err; + + return genphy_config_aneg(phydev); +} + +static int rockchip_phy_resume(struct phy_device *phydev) +{ + genphy_resume(phydev); + + return rockchip_integrated_phy_config_init(phydev); +} + +static struct phy_driver rockchip_phy_driver[] = { +{ + .phy_id = INTERNAL_EPHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "Rockchip integrated EPHY", + /* PHY_BASIC_FEATURES */ + .flags = 0, + .link_change_notify = rockchip_link_change_notify, + .soft_reset = genphy_soft_reset, + .config_init = rockchip_integrated_phy_config_init, + .config_aneg = rockchip_config_aneg, + .suspend = genphy_suspend, + .resume = rockchip_phy_resume, +}, +}; + +module_phy_driver(rockchip_phy_driver); + +static struct mdio_device_id __maybe_unused rockchip_phy_tbl[] = { + { INTERNAL_EPHY_ID, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, rockchip_phy_tbl); + +MODULE_AUTHOR("David Wu <david.wu@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip Ethernet PHY driver"); +MODULE_LICENSE("GPL"); |