summaryrefslogtreecommitdiffstats
path: root/drivers/parisc/eisa_enumerator.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parisc/eisa_enumerator.c')
-rw-r--r--drivers/parisc/eisa_enumerator.c516
1 files changed, 516 insertions, 0 deletions
diff --git a/drivers/parisc/eisa_enumerator.c b/drivers/parisc/eisa_enumerator.c
new file mode 100644
index 000000000..f0cb31198
--- /dev/null
+++ b/drivers/parisc/eisa_enumerator.c
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * eisa_enumerator.c - provide support for EISA adapters in PA-RISC machines
+ *
+ * Copyright (c) 2002 Daniel Engstrom <5116@telia.com>
+ */
+
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+
+#include <asm/eisa_bus.h>
+#include <asm/eisa_eeprom.h>
+
+
+/*
+ * Todo:
+ *
+ * PORT init with MASK attr and other size than byte
+ * MEMORY with other decode than 20 bit
+ * CRC stuff
+ * FREEFORM stuff
+ */
+
+#define EPI 0xc80
+#define NUM_SLOT 16
+#define SLOT2PORT(x) (x<<12)
+
+
+/* macros to handle unaligned accesses and
+ * byte swapping. The data in the EEPROM is
+ * little-endian on the big-endian PAROSC */
+#define get_8(x) (*(u_int8_t*)(x))
+
+static inline u_int16_t get_16(const unsigned char *x)
+{
+ return (x[1] << 8) | x[0];
+}
+
+static inline u_int32_t get_32(const unsigned char *x)
+{
+ return (x[3] << 24) | (x[2] << 16) | (x[1] << 8) | x[0];
+}
+
+static inline u_int32_t get_24(const unsigned char *x)
+{
+ return (x[2] << 24) | (x[1] << 16) | (x[0] << 8);
+}
+
+static void print_eisa_id(char *s, u_int32_t id)
+{
+ char vendor[4];
+ int rev;
+ int device;
+
+ rev = id & 0xff;
+ id >>= 8;
+ device = id & 0xff;
+ id >>= 8;
+ vendor[3] = '\0';
+ vendor[2] = '@' + (id & 0x1f);
+ id >>= 5;
+ vendor[1] = '@' + (id & 0x1f);
+ id >>= 5;
+ vendor[0] = '@' + (id & 0x1f);
+ id >>= 5;
+
+ sprintf(s, "%s%02X%02X", vendor, device, rev);
+}
+
+static int configure_memory(const unsigned char *buf,
+ struct resource *mem_parent,
+ char *name)
+{
+ int len;
+ u_int8_t c;
+ int i;
+ struct resource *res;
+
+ len=0;
+
+ for (i=0;i<HPEE_MEMORY_MAX_ENT;i++) {
+ c = get_8(buf+len);
+
+ if (NULL != (res = kzalloc(sizeof(struct resource), GFP_KERNEL))) {
+ int result;
+
+ res->name = name;
+ res->start = mem_parent->start + get_24(buf+len+2);
+ res->end = res->start + get_16(buf+len+5)*1024;
+ res->flags = IORESOURCE_MEM;
+ pr_cont("memory %pR ", res);
+ result = request_resource(mem_parent, res);
+ if (result < 0) {
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ return result;
+ }
+ }
+
+ len+=7;
+
+ if (!(c & HPEE_MEMORY_MORE)) {
+ break;
+ }
+ }
+
+ return len;
+}
+
+
+static int configure_irq(const unsigned char *buf)
+{
+ int len;
+ u_int8_t c;
+ int i;
+
+ len=0;
+
+ for (i=0;i<HPEE_IRQ_MAX_ENT;i++) {
+ c = get_8(buf+len);
+
+ pr_cont("IRQ %d ", c & HPEE_IRQ_CHANNEL_MASK);
+ if (c & HPEE_IRQ_TRIG_LEVEL) {
+ eisa_make_irq_level(c & HPEE_IRQ_CHANNEL_MASK);
+ } else {
+ eisa_make_irq_edge(c & HPEE_IRQ_CHANNEL_MASK);
+ }
+
+ len+=2;
+ /* hpux seems to allow for
+ * two bytes of irq data but only defines one of
+ * them, I think */
+ if (!(c & HPEE_IRQ_MORE)) {
+ break;
+ }
+ }
+
+ return len;
+}
+
+
+static int configure_dma(const unsigned char *buf)
+{
+ int len;
+ u_int8_t c;
+ int i;
+
+ len=0;
+
+ for (i=0;i<HPEE_DMA_MAX_ENT;i++) {
+ c = get_8(buf+len);
+ pr_cont("DMA %d ", c&HPEE_DMA_CHANNEL_MASK);
+ /* fixme: maybe initialize the dma channel withthe timing ? */
+ len+=2;
+ if (!(c & HPEE_DMA_MORE)) {
+ break;
+ }
+ }
+
+ return len;
+}
+
+static int configure_port(const unsigned char *buf, struct resource *io_parent,
+ char *board)
+{
+ int len;
+ u_int8_t c;
+ int i;
+ struct resource *res;
+ int result;
+
+ len=0;
+
+ for (i=0;i<HPEE_PORT_MAX_ENT;i++) {
+ c = get_8(buf+len);
+
+ if (NULL != (res = kzalloc(sizeof(struct resource), GFP_KERNEL))) {
+ res->name = board;
+ res->start = get_16(buf+len+1);
+ res->end = get_16(buf+len+1)+(c&HPEE_PORT_SIZE_MASK)+1;
+ res->flags = IORESOURCE_IO;
+ pr_cont("ioports %pR ", res);
+ result = request_resource(io_parent, res);
+ if (result < 0) {
+ printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
+ return result;
+ }
+ }
+
+ len+=3;
+ if (!(c & HPEE_PORT_MORE)) {
+ break;
+ }
+ }
+
+ return len;
+}
+
+
+/* byte 1 and 2 is the port number to write
+ * and at byte 3 the value to write starts.
+ * I assume that there are and- and or- masks
+ * here when HPEE_PORT_INIT_MASK is set but I have
+ * not yet encountered this. */
+static int configure_port_init(const unsigned char *buf)
+{
+ int len=0;
+ u_int8_t c;
+
+ while (len<HPEE_PORT_INIT_MAX_LEN) {
+ int s=0;
+ c = get_8(buf+len);
+
+ switch (c & HPEE_PORT_INIT_WIDTH_MASK) {
+ case HPEE_PORT_INIT_WIDTH_BYTE:
+ s=1;
+ if (c & HPEE_PORT_INIT_MASK) {
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
+ outb((inb(get_16(buf+len+1) &
+ get_8(buf+len+3)) |
+ get_8(buf+len+4)), get_16(buf+len+1));
+
+ } else {
+ outb(get_8(buf+len+3), get_16(buf+len+1));
+
+ }
+ break;
+ case HPEE_PORT_INIT_WIDTH_WORD:
+ s=2;
+ if (c & HPEE_PORT_INIT_MASK) {
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
+ outw((inw(get_16(buf+len+1)) &
+ get_16(buf+len+3)) |
+ get_16(buf+len+5),
+ get_16(buf+len+1));
+ } else {
+ outw(cpu_to_le16(get_16(buf+len+3)), get_16(buf+len+1));
+ }
+ break;
+ case HPEE_PORT_INIT_WIDTH_DWORD:
+ s=4;
+ if (c & HPEE_PORT_INIT_MASK) {
+ printk(KERN_WARNING "port_init: unverified mask attribute\n");
+ outl((inl(get_16(buf+len+1) &
+ get_32(buf+len+3)) |
+ get_32(buf+len+7)), get_16(buf+len+1));
+ } else {
+ outl(cpu_to_le32(get_32(buf+len+3)), get_16(buf+len+1));
+ }
+
+ break;
+ default:
+ printk(KERN_ERR "Invalid port init word %02x\n", c);
+ return 0;
+ }
+
+ if (c & HPEE_PORT_INIT_MASK) {
+ s*=2;
+ }
+
+ len+=s+3;
+ if (!(c & HPEE_PORT_INIT_MORE)) {
+ break;
+ }
+ }
+
+ return len;
+}
+
+static int configure_choise(const unsigned char *buf, u_int8_t *info)
+{
+ int len;
+
+ /* theis record contain the value of the functions
+ * configuration choises and an info byte which
+ * describes which other records to expect in this
+ * function */
+ len = get_8(buf);
+ *info=get_8(buf+len+1);
+
+ return len+2;
+}
+
+static int configure_type_string(const unsigned char *buf)
+{
+ int len;
+
+ /* just skip past the type field */
+ len = get_8(buf);
+ if (len > 80) {
+ printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
+ }
+
+ return 1+len;
+}
+
+static int configure_function(const unsigned char *buf, int *more)
+{
+ /* the init field seems to be a two-byte field
+ * which is non-zero if there are an other function following
+ * I think it is the length of the function def
+ */
+ *more = get_16(buf);
+
+ return 2;
+}
+
+static int parse_slot_config(int slot,
+ const unsigned char *buf,
+ struct eeprom_eisa_slot_info *es,
+ struct resource *io_parent,
+ struct resource *mem_parent)
+{
+ int res=0;
+ int function_len;
+ unsigned int pos=0;
+ unsigned int maxlen;
+ int num_func=0;
+ u_int8_t flags;
+ int p0;
+
+ char *board;
+ int id_string_used=0;
+
+ if (NULL == (board = kmalloc(8, GFP_KERNEL))) {
+ return -1;
+ }
+ print_eisa_id(board, es->eisa_slot_id);
+ printk(KERN_INFO "EISA slot %d: %s %s ",
+ slot, board, es->flags&HPEE_FLAG_BOARD_IS_ISA ? "ISA" : "EISA");
+
+ maxlen = es->config_data_length < HPEE_MAX_LENGTH ?
+ es->config_data_length : HPEE_MAX_LENGTH;
+ while ((pos < maxlen) && (num_func <= es->num_functions)) {
+ pos+=configure_function(buf+pos, &function_len);
+
+ if (!function_len) {
+ break;
+ }
+ num_func++;
+ p0 = pos;
+ pos += configure_choise(buf+pos, &flags);
+
+ if (flags & HPEE_FUNCTION_INFO_F_DISABLED) {
+ /* function disabled, skip silently */
+ pos = p0 + function_len;
+ continue;
+ }
+ if (flags & HPEE_FUNCTION_INFO_CFG_FREE_FORM) {
+ /* I have no idea how to handle this */
+ printk("function %d have free-form configuration, skipping ",
+ num_func);
+ pos = p0 + function_len;
+ continue;
+ }
+
+ /* the ordering of the sections need
+ * more investigation.
+ * Currently I think that memory comaed before IRQ
+ * I assume the order is LSB to MSB in the
+ * info flags
+ * eg type, memory, irq, dma, port, HPEE_PORT_init
+ */
+
+ if (flags & HPEE_FUNCTION_INFO_HAVE_TYPE) {
+ pos += configure_type_string(buf+pos);
+ }
+
+ if (flags & HPEE_FUNCTION_INFO_HAVE_MEMORY) {
+ id_string_used=1;
+ pos += configure_memory(buf+pos, mem_parent, board);
+ }
+
+ if (flags & HPEE_FUNCTION_INFO_HAVE_IRQ) {
+ pos += configure_irq(buf+pos);
+ }
+
+ if (flags & HPEE_FUNCTION_INFO_HAVE_DMA) {
+ pos += configure_dma(buf+pos);
+ }
+
+ if (flags & HPEE_FUNCTION_INFO_HAVE_PORT) {
+ id_string_used=1;
+ pos += configure_port(buf+pos, io_parent, board);
+ }
+
+ if (flags & HPEE_FUNCTION_INFO_HAVE_PORT_INIT) {
+ pos += configure_port_init(buf+pos);
+ }
+
+ if (p0 + function_len < pos) {
+ printk(KERN_ERR "eisa_enumerator: function %d length mismatch "
+ "got %d, expected %d\n",
+ num_func, pos-p0, function_len);
+ res=-1;
+ break;
+ }
+ pos = p0 + function_len;
+ }
+ pr_cont("\n");
+ if (!id_string_used) {
+ kfree(board);
+ }
+
+ if (pos != es->config_data_length) {
+ printk(KERN_ERR "eisa_enumerator: config data length mismatch got %d, expected %d\n",
+ pos, es->config_data_length);
+ res=-1;
+ }
+
+ if (num_func != es->num_functions) {
+ printk(KERN_ERR "eisa_enumerator: number of functions mismatch got %d, expected %d\n",
+ num_func, es->num_functions);
+ res=-2;
+ }
+
+ return res;
+
+}
+
+static int init_slot(int slot, struct eeprom_eisa_slot_info *es)
+{
+ unsigned int id;
+
+ char id_string[8];
+
+ if (!(es->slot_info&HPEE_SLOT_INFO_NO_READID)) {
+ /* try to read the id of the board in the slot */
+ id = le32_to_cpu(inl(SLOT2PORT(slot)+EPI));
+
+ if (0xffffffff == id) {
+ /* Maybe we didn't expect a card to be here... */
+ if (es->eisa_slot_id == 0xffffffff)
+ return -1;
+
+ /* this board is not here or it does not
+ * support readid
+ */
+ printk(KERN_ERR "EISA slot %d a configured board was not detected (",
+ slot);
+
+ print_eisa_id(id_string, es->eisa_slot_id);
+ printk(" expected %s)\n", id_string);
+
+ return -1;
+
+ }
+ if (es->eisa_slot_id != id) {
+ print_eisa_id(id_string, id);
+ printk(KERN_ERR "EISA slot %d id mismatch: got %s",
+ slot, id_string);
+
+ print_eisa_id(id_string, es->eisa_slot_id);
+ printk(" expected %s\n", id_string);
+
+ return -1;
+
+ }
+ }
+
+ /* now: we need to enable the board if
+ * it supports enabling and run through
+ * the port init sction if present
+ * and finally record any interrupt polarity
+ */
+ if (es->slot_features & HPEE_SLOT_FEATURES_ENABLE) {
+ /* enable board */
+ outb(0x01| inb(SLOT2PORT(slot)+EPI+4),
+ SLOT2PORT(slot)+EPI+4);
+ }
+
+ return 0;
+}
+
+
+int eisa_enumerator(unsigned long eeprom_addr,
+ struct resource *io_parent, struct resource *mem_parent)
+{
+ int i;
+ struct eeprom_header *eh;
+ static char eeprom_buf[HPEE_MAX_LENGTH];
+
+ for (i=0; i < HPEE_MAX_LENGTH; i++) {
+ eeprom_buf[i] = gsc_readb(eeprom_addr+i);
+ }
+
+ printk(KERN_INFO "Enumerating EISA bus\n");
+
+ eh = (struct eeprom_header*)(eeprom_buf);
+ for (i=0;i<eh->num_slots;i++) {
+ struct eeprom_eisa_slot_info *es;
+
+ es = (struct eeprom_eisa_slot_info*)
+ (&eeprom_buf[HPEE_SLOT_INFO(i)]);
+
+ if (-1==init_slot(i+1, es)) {
+ continue;
+ }
+
+ if (es->config_data_offset < HPEE_MAX_LENGTH) {
+ if (parse_slot_config(i+1, &eeprom_buf[es->config_data_offset],
+ es, io_parent, mem_parent)) {
+ return -1;
+ }
+ } else {
+ printk (KERN_WARNING "EISA EEPROM offset 0x%x out of range\n",es->config_data_offset);
+ return -1;
+ }
+ }
+ return eh->num_slots;
+}
+