summaryrefslogtreecommitdiffstats
path: root/drivers/phy/motorola/phy-mapphone-mdm6600.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/motorola/phy-mapphone-mdm6600.c')
-rw-r--r--drivers/phy/motorola/phy-mapphone-mdm6600.c673
1 files changed, 673 insertions, 0 deletions
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
new file mode 100644
index 000000000..67802f9e4
--- /dev/null
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Motorola Mapphone MDM6600 modem GPIO controlled USB PHY driver
+ * Copyright (C) 2018 Tony Lindgren <tony@atomide.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/pinctrl/consumer.h>
+
+#define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */
+#define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */
+#define PHY_MDM6600_WAKE_KICK_MS 600 /* time on after GPIO toggle */
+#define MDM6600_MODEM_IDLE_DELAY_MS 1000 /* modem after USB suspend */
+#define MDM6600_MODEM_WAKE_DELAY_MS 200 /* modem response after idle */
+
+enum phy_mdm6600_ctrl_lines {
+ PHY_MDM6600_ENABLE, /* USB PHY enable */
+ PHY_MDM6600_POWER, /* Device power */
+ PHY_MDM6600_RESET, /* Device reset */
+ PHY_MDM6600_NR_CTRL_LINES,
+};
+
+enum phy_mdm6600_bootmode_lines {
+ PHY_MDM6600_MODE0, /* out USB mode0 and OOB wake */
+ PHY_MDM6600_MODE1, /* out USB mode1, in OOB wake */
+ PHY_MDM6600_NR_MODE_LINES,
+};
+
+enum phy_mdm6600_cmd_lines {
+ PHY_MDM6600_CMD0,
+ PHY_MDM6600_CMD1,
+ PHY_MDM6600_CMD2,
+ PHY_MDM6600_NR_CMD_LINES,
+};
+
+enum phy_mdm6600_status_lines {
+ PHY_MDM6600_STATUS0,
+ PHY_MDM6600_STATUS1,
+ PHY_MDM6600_STATUS2,
+ PHY_MDM6600_NR_STATUS_LINES,
+};
+
+/*
+ * MDM6600 command codes. These are based on Motorola Mapphone Linux
+ * kernel tree.
+ */
+enum phy_mdm6600_cmd {
+ PHY_MDM6600_CMD_BP_PANIC_ACK,
+ PHY_MDM6600_CMD_DATA_ONLY_BYPASS, /* Reroute USB to CPCAP PHY */
+ PHY_MDM6600_CMD_FULL_BYPASS, /* Reroute USB to CPCAP PHY */
+ PHY_MDM6600_CMD_NO_BYPASS, /* Request normal USB mode */
+ PHY_MDM6600_CMD_BP_SHUTDOWN_REQ, /* Request device power off */
+ PHY_MDM6600_CMD_BP_UNKNOWN_5,
+ PHY_MDM6600_CMD_BP_UNKNOWN_6,
+ PHY_MDM6600_CMD_UNDEFINED,
+};
+
+/*
+ * MDM6600 status codes. These are based on Motorola Mapphone Linux
+ * kernel tree.
+ */
+enum phy_mdm6600_status {
+ PHY_MDM6600_STATUS_PANIC, /* Seems to be really off */
+ PHY_MDM6600_STATUS_PANIC_BUSY_WAIT,
+ PHY_MDM6600_STATUS_QC_DLOAD,
+ PHY_MDM6600_STATUS_RAM_DOWNLOADER, /* MDM6600 USB flashing mode */
+ PHY_MDM6600_STATUS_PHONE_CODE_AWAKE, /* MDM6600 normal USB mode */
+ PHY_MDM6600_STATUS_PHONE_CODE_ASLEEP,
+ PHY_MDM6600_STATUS_SHUTDOWN_ACK,
+ PHY_MDM6600_STATUS_UNDEFINED,
+};
+
+static const char * const
+phy_mdm6600_status_name[] = {
+ "off", "busy", "qc_dl", "ram_dl", "awake",
+ "asleep", "shutdown", "undefined",
+};
+
+struct phy_mdm6600 {
+ struct device *dev;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct gpio_desc *ctrl_gpios[PHY_MDM6600_NR_CTRL_LINES];
+ struct gpio_descs *mode_gpios;
+ struct gpio_descs *status_gpios;
+ struct gpio_descs *cmd_gpios;
+ struct delayed_work bootup_work;
+ struct delayed_work status_work;
+ struct delayed_work modem_wake_work;
+ struct completion ack;
+ bool enabled; /* mdm6600 phy enabled */
+ bool running; /* mdm6600 boot done */
+ bool awake; /* mdm6600 respnds on n_gsm */
+ int status;
+};
+
+static int phy_mdm6600_init(struct phy *x)
+{
+ struct phy_mdm6600 *ddata = phy_get_drvdata(x);
+ struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+
+ if (!ddata->enabled)
+ return -EPROBE_DEFER;
+
+ gpiod_set_value_cansleep(enable_gpio, 0);
+
+ return 0;
+}
+
+static int phy_mdm6600_power_on(struct phy *x)
+{
+ struct phy_mdm6600 *ddata = phy_get_drvdata(x);
+ struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+
+ if (!ddata->enabled)
+ return -ENODEV;
+
+ gpiod_set_value_cansleep(enable_gpio, 1);
+
+ /* Allow aggressive PM for USB, it's only needed for n_gsm port */
+ if (pm_runtime_enabled(&x->dev))
+ phy_pm_runtime_put(x);
+
+ return 0;
+}
+
+static int phy_mdm6600_power_off(struct phy *x)
+{
+ struct phy_mdm6600 *ddata = phy_get_drvdata(x);
+ struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
+ int error;
+
+ if (!ddata->enabled)
+ return -ENODEV;
+
+ /* Paired with phy_pm_runtime_put() in phy_mdm6600_power_on() */
+ if (pm_runtime_enabled(&x->dev)) {
+ error = phy_pm_runtime_get(x);
+ if (error < 0 && error != -EINPROGRESS)
+ dev_warn(ddata->dev, "%s: phy_pm_runtime_get: %i\n",
+ __func__, error);
+ }
+
+ gpiod_set_value_cansleep(enable_gpio, 0);
+
+ return 0;
+}
+
+static const struct phy_ops gpio_usb_ops = {
+ .init = phy_mdm6600_init,
+ .power_on = phy_mdm6600_power_on,
+ .power_off = phy_mdm6600_power_off,
+ .owner = THIS_MODULE,
+};
+
+/**
+ * phy_mdm6600_cmd() - send a command request to mdm6600
+ * @ddata: device driver data
+ * @val: value of cmd to be set
+ *
+ * Configures the three command request GPIOs to the specified value.
+ */
+static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val)
+{
+ DECLARE_BITMAP(values, PHY_MDM6600_NR_CMD_LINES);
+
+ values[0] = val;
+
+ gpiod_set_array_value_cansleep(PHY_MDM6600_NR_CMD_LINES,
+ ddata->cmd_gpios->desc,
+ ddata->cmd_gpios->info, values);
+}
+
+/**
+ * phy_mdm6600_status() - read mdm6600 status lines
+ * @work: work structure
+ */
+static void phy_mdm6600_status(struct work_struct *work)
+{
+ struct phy_mdm6600 *ddata;
+ struct device *dev;
+ DECLARE_BITMAP(values, PHY_MDM6600_NR_STATUS_LINES);
+ int error;
+
+ ddata = container_of(work, struct phy_mdm6600, status_work.work);
+ dev = ddata->dev;
+
+ error = gpiod_get_array_value_cansleep(PHY_MDM6600_NR_STATUS_LINES,
+ ddata->status_gpios->desc,
+ ddata->status_gpios->info,
+ values);
+ if (error)
+ return;
+
+ ddata->status = values[0] & ((1 << PHY_MDM6600_NR_STATUS_LINES) - 1);
+
+ dev_info(dev, "modem status: %i %s\n",
+ ddata->status,
+ phy_mdm6600_status_name[ddata->status]);
+ complete(&ddata->ack);
+}
+
+static irqreturn_t phy_mdm6600_irq_thread(int irq, void *data)
+{
+ struct phy_mdm6600 *ddata = data;
+
+ schedule_delayed_work(&ddata->status_work, msecs_to_jiffies(10));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * phy_mdm6600_wakeirq_thread - handle mode1 line OOB wake after booting
+ * @irq: interrupt
+ * @data: interrupt handler data
+ *
+ * GPIO mode1 is used initially as output to configure the USB boot
+ * mode for mdm6600. After booting it is used as input for OOB wake
+ * signal from mdm6600 to the SoC. Just use it for debug info only
+ * for now.
+ */
+static irqreturn_t phy_mdm6600_wakeirq_thread(int irq, void *data)
+{
+ struct phy_mdm6600 *ddata = data;
+ struct gpio_desc *mode_gpio1;
+ int error, wakeup;
+
+ mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1];
+ wakeup = gpiod_get_value(mode_gpio1);
+ if (!wakeup)
+ return IRQ_NONE;
+
+ dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", wakeup);
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ pm_runtime_put_noidle(ddata->dev);
+
+ return IRQ_NONE;
+ }
+
+ /* Just wake-up and kick the autosuspend timer */
+ pm_runtime_mark_last_busy(ddata->dev);
+ pm_runtime_put_autosuspend(ddata->dev);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * phy_mdm6600_init_irq() - initialize mdm6600 status IRQ lines
+ * @ddata: device driver data
+ */
+static void phy_mdm6600_init_irq(struct phy_mdm6600 *ddata)
+{
+ struct device *dev = ddata->dev;
+ int i, error, irq;
+
+ for (i = PHY_MDM6600_STATUS0;
+ i <= PHY_MDM6600_STATUS2; i++) {
+ struct gpio_desc *gpio = ddata->status_gpios->desc[i];
+
+ irq = gpiod_to_irq(gpio);
+ if (irq <= 0)
+ continue;
+
+ error = devm_request_threaded_irq(dev, irq, NULL,
+ phy_mdm6600_irq_thread,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "mdm6600",
+ ddata);
+ if (error)
+ dev_warn(dev, "no modem status irq%i: %i\n",
+ irq, error);
+ }
+}
+
+struct phy_mdm6600_map {
+ const char *name;
+ int direction;
+};
+
+static const struct phy_mdm6600_map
+phy_mdm6600_ctrl_gpio_map[PHY_MDM6600_NR_CTRL_LINES] = {
+ { "enable", GPIOD_OUT_LOW, }, /* low = phy disabled */
+ { "power", GPIOD_OUT_LOW, }, /* low = off */
+ { "reset", GPIOD_OUT_HIGH, }, /* high = reset */
+};
+
+/**
+ * phy_mdm6600_init_lines() - initialize mdm6600 GPIO lines
+ * @ddata: device driver data
+ */
+static int phy_mdm6600_init_lines(struct phy_mdm6600 *ddata)
+{
+ struct device *dev = ddata->dev;
+ int i;
+
+ /* MDM6600 control lines */
+ for (i = 0; i < ARRAY_SIZE(phy_mdm6600_ctrl_gpio_map); i++) {
+ const struct phy_mdm6600_map *map =
+ &phy_mdm6600_ctrl_gpio_map[i];
+ struct gpio_desc **gpio = &ddata->ctrl_gpios[i];
+
+ *gpio = devm_gpiod_get(dev, map->name, map->direction);
+ if (IS_ERR(*gpio)) {
+ dev_info(dev, "gpio %s error %li\n",
+ map->name, PTR_ERR(*gpio));
+ return PTR_ERR(*gpio);
+ }
+ }
+
+ /* MDM6600 USB start-up mode output lines */
+ ddata->mode_gpios = devm_gpiod_get_array(dev, "motorola,mode",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ddata->mode_gpios))
+ return PTR_ERR(ddata->mode_gpios);
+
+ if (ddata->mode_gpios->ndescs != PHY_MDM6600_NR_MODE_LINES)
+ return -EINVAL;
+
+ /* MDM6600 status input lines */
+ ddata->status_gpios = devm_gpiod_get_array(dev, "motorola,status",
+ GPIOD_IN);
+ if (IS_ERR(ddata->status_gpios))
+ return PTR_ERR(ddata->status_gpios);
+
+ if (ddata->status_gpios->ndescs != PHY_MDM6600_NR_STATUS_LINES)
+ return -EINVAL;
+
+ /* MDM6600 cmd output lines */
+ ddata->cmd_gpios = devm_gpiod_get_array(dev, "motorola,cmd",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ddata->cmd_gpios))
+ return PTR_ERR(ddata->cmd_gpios);
+
+ if (ddata->cmd_gpios->ndescs != PHY_MDM6600_NR_CMD_LINES)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * phy_mdm6600_device_power_on() - power on mdm6600 device
+ * @ddata: device driver data
+ *
+ * To get the integrated USB phy in MDM6600 takes some hoops. We must ensure
+ * the shared USB bootmode GPIOs are configured, then request modem start-up,
+ * reset and power-up.. And then we need to recycle the shared USB bootmode
+ * GPIOs as they are also used for Out of Band (OOB) wake for the USB and
+ * TS 27.010 serial mux.
+ */
+static int phy_mdm6600_device_power_on(struct phy_mdm6600 *ddata)
+{
+ struct gpio_desc *mode_gpio0, *mode_gpio1, *reset_gpio, *power_gpio;
+ int error = 0, wakeirq;
+
+ mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0];
+ mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1];
+ reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET];
+ power_gpio = ddata->ctrl_gpios[PHY_MDM6600_POWER];
+
+ /*
+ * Shared GPIOs must be low for normal USB mode. After booting
+ * they are used for OOB wake signaling. These can be also used
+ * to configure USB flashing mode later on based on a module
+ * parameter.
+ */
+ gpiod_set_value_cansleep(mode_gpio0, 0);
+ gpiod_set_value_cansleep(mode_gpio1, 0);
+
+ /* Request start-up mode */
+ phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_NO_BYPASS);
+
+ /* Request a reset first */
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ msleep(100);
+
+ /* Toggle power GPIO to request mdm6600 to start */
+ gpiod_set_value_cansleep(power_gpio, 1);
+ msleep(100);
+ gpiod_set_value_cansleep(power_gpio, 0);
+
+ /*
+ * Looks like the USB PHY needs between 2.2 to 4 seconds.
+ * If we try to use it before that, we will get L3 errors
+ * from omap-usb-host trying to access the PHY. See also
+ * phy_mdm6600_init() for -EPROBE_DEFER.
+ */
+ msleep(PHY_MDM6600_PHY_DELAY_MS);
+ ddata->enabled = true;
+
+ /* Booting up the rest of MDM6600 will take total about 8 seconds */
+ dev_info(ddata->dev, "Waiting for power up request to complete..\n");
+ if (wait_for_completion_timeout(&ddata->ack,
+ msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS))) {
+ if (ddata->status > PHY_MDM6600_STATUS_PANIC &&
+ ddata->status < PHY_MDM6600_STATUS_SHUTDOWN_ACK)
+ dev_info(ddata->dev, "Powered up OK\n");
+ } else {
+ ddata->enabled = false;
+ error = -ETIMEDOUT;
+ dev_err(ddata->dev, "Timed out powering up\n");
+ }
+
+ /* Reconfigure mode1 GPIO as input for OOB wake */
+ gpiod_direction_input(mode_gpio1);
+
+ wakeirq = gpiod_to_irq(mode_gpio1);
+ if (wakeirq <= 0)
+ return wakeirq;
+
+ error = devm_request_threaded_irq(ddata->dev, wakeirq, NULL,
+ phy_mdm6600_wakeirq_thread,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ "mdm6600-wake",
+ ddata);
+ if (error)
+ dev_warn(ddata->dev, "no modem wakeirq irq%i: %i\n",
+ wakeirq, error);
+
+ ddata->running = true;
+
+ return error;
+}
+
+/**
+ * phy_mdm6600_device_power_off() - power off mdm6600 device
+ * @ddata: device driver data
+ */
+static void phy_mdm6600_device_power_off(struct phy_mdm6600 *ddata)
+{
+ struct gpio_desc *reset_gpio =
+ ddata->ctrl_gpios[PHY_MDM6600_RESET];
+ int error;
+
+ ddata->enabled = false;
+ phy_mdm6600_cmd(ddata, PHY_MDM6600_CMD_BP_SHUTDOWN_REQ);
+ msleep(100);
+
+ gpiod_set_value_cansleep(reset_gpio, 1);
+
+ dev_info(ddata->dev, "Waiting for power down request to complete.. ");
+ if (wait_for_completion_timeout(&ddata->ack,
+ msecs_to_jiffies(5000))) {
+ if (ddata->status == PHY_MDM6600_STATUS_PANIC)
+ dev_info(ddata->dev, "Powered down OK\n");
+ } else {
+ dev_err(ddata->dev, "Timed out powering down\n");
+ }
+
+ /*
+ * Keep reset gpio high with padconf internal pull-up resistor to
+ * prevent modem from waking up during deeper SoC idle states. The
+ * gpio bank lines can have glitches if not in the always-on wkup
+ * domain.
+ */
+ error = pinctrl_pm_select_sleep_state(ddata->dev);
+ if (error)
+ dev_warn(ddata->dev, "%s: error with sleep_state: %i\n",
+ __func__, error);
+}
+
+static void phy_mdm6600_deferred_power_on(struct work_struct *work)
+{
+ struct phy_mdm6600 *ddata;
+ int error;
+
+ ddata = container_of(work, struct phy_mdm6600, bootup_work.work);
+
+ error = phy_mdm6600_device_power_on(ddata);
+ if (error)
+ dev_err(ddata->dev, "Device not functional\n");
+}
+
+/*
+ * USB suspend puts mdm6600 into low power mode. For any n_gsm using apps,
+ * we need to keep the modem awake by kicking it's mode0 GPIO. This will
+ * keep the modem awake for about 1.2 seconds. When no n_gsm apps are using
+ * the modem, runtime PM auto mode can be enabled so modem can enter low
+ * power mode.
+ */
+static void phy_mdm6600_wake_modem(struct phy_mdm6600 *ddata)
+{
+ struct gpio_desc *mode_gpio0;
+
+ mode_gpio0 = ddata->mode_gpios->desc[PHY_MDM6600_MODE0];
+ gpiod_set_value_cansleep(mode_gpio0, 1);
+ usleep_range(5, 15);
+ gpiod_set_value_cansleep(mode_gpio0, 0);
+ if (ddata->awake)
+ usleep_range(5, 15);
+ else
+ msleep(MDM6600_MODEM_WAKE_DELAY_MS);
+}
+
+static void phy_mdm6600_modem_wake(struct work_struct *work)
+{
+ struct phy_mdm6600 *ddata;
+
+ ddata = container_of(work, struct phy_mdm6600, modem_wake_work.work);
+ phy_mdm6600_wake_modem(ddata);
+
+ /*
+ * The modem does not always stay awake 1.2 seconds after toggling
+ * the wake GPIO, and sometimes it idles after about some 600 ms
+ * making writes time out.
+ */
+ schedule_delayed_work(&ddata->modem_wake_work,
+ msecs_to_jiffies(PHY_MDM6600_WAKE_KICK_MS));
+}
+
+static int __maybe_unused phy_mdm6600_runtime_suspend(struct device *dev)
+{
+ struct phy_mdm6600 *ddata = dev_get_drvdata(dev);
+
+ cancel_delayed_work_sync(&ddata->modem_wake_work);
+ ddata->awake = false;
+
+ return 0;
+}
+
+static int __maybe_unused phy_mdm6600_runtime_resume(struct device *dev)
+{
+ struct phy_mdm6600 *ddata = dev_get_drvdata(dev);
+
+ phy_mdm6600_modem_wake(&ddata->modem_wake_work.work);
+ ddata->awake = true;
+
+ return 0;
+}
+
+static const struct dev_pm_ops phy_mdm6600_pm_ops = {
+ SET_RUNTIME_PM_OPS(phy_mdm6600_runtime_suspend,
+ phy_mdm6600_runtime_resume, NULL)
+};
+
+static const struct of_device_id phy_mdm6600_id_table[] = {
+ { .compatible = "motorola,mapphone-mdm6600", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, phy_mdm6600_id_table);
+
+static int phy_mdm6600_probe(struct platform_device *pdev)
+{
+ struct phy_mdm6600 *ddata;
+ int error;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&ddata->bootup_work,
+ phy_mdm6600_deferred_power_on);
+ INIT_DELAYED_WORK(&ddata->status_work, phy_mdm6600_status);
+ INIT_DELAYED_WORK(&ddata->modem_wake_work, phy_mdm6600_modem_wake);
+ init_completion(&ddata->ack);
+
+ ddata->dev = &pdev->dev;
+ platform_set_drvdata(pdev, ddata);
+
+ error = phy_mdm6600_init_lines(ddata);
+ if (error)
+ return error;
+
+ phy_mdm6600_init_irq(ddata);
+ schedule_delayed_work(&ddata->bootup_work, 0);
+
+ /*
+ * See phy_mdm6600_device_power_on(). We should be able
+ * to remove this eventually when ohci-platform can deal
+ * with -EPROBE_DEFER.
+ */
+ msleep(PHY_MDM6600_PHY_DELAY_MS + 500);
+
+ /*
+ * Enable PM runtime only after PHY has been powered up properly.
+ * It is currently only needed after USB suspends mdm6600 and n_gsm
+ * needs to access the device. We don't want to do this earlier as
+ * gpio mode0 pin doubles as mdm6600 wake-up gpio.
+ */
+ pm_runtime_use_autosuspend(ddata->dev);
+ pm_runtime_set_autosuspend_delay(ddata->dev,
+ MDM6600_MODEM_IDLE_DELAY_MS);
+ pm_runtime_enable(ddata->dev);
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ dev_warn(ddata->dev, "failed to wake modem: %i\n", error);
+ pm_runtime_put_noidle(ddata->dev);
+ goto cleanup;
+ }
+
+ ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops);
+ if (IS_ERR(ddata->generic_phy)) {
+ error = PTR_ERR(ddata->generic_phy);
+ goto idle;
+ }
+
+ phy_set_drvdata(ddata->generic_phy, ddata);
+
+ ddata->phy_provider =
+ devm_of_phy_provider_register(ddata->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(ddata->phy_provider))
+ error = PTR_ERR(ddata->phy_provider);
+
+idle:
+ pm_runtime_mark_last_busy(ddata->dev);
+ pm_runtime_put_autosuspend(ddata->dev);
+
+cleanup:
+ if (error < 0) {
+ phy_mdm6600_device_power_off(ddata);
+ pm_runtime_disable(ddata->dev);
+ pm_runtime_dont_use_autosuspend(ddata->dev);
+ }
+
+ return error;
+}
+
+static int phy_mdm6600_remove(struct platform_device *pdev)
+{
+ struct phy_mdm6600 *ddata = platform_get_drvdata(pdev);
+ struct gpio_desc *reset_gpio = ddata->ctrl_gpios[PHY_MDM6600_RESET];
+
+ pm_runtime_get_noresume(ddata->dev);
+ pm_runtime_dont_use_autosuspend(ddata->dev);
+ pm_runtime_put_sync(ddata->dev);
+ pm_runtime_disable(ddata->dev);
+
+ if (!ddata->running)
+ wait_for_completion_timeout(&ddata->ack,
+ msecs_to_jiffies(PHY_MDM6600_ENABLED_DELAY_MS));
+
+ gpiod_set_value_cansleep(reset_gpio, 1);
+ phy_mdm6600_device_power_off(ddata);
+
+ cancel_delayed_work_sync(&ddata->modem_wake_work);
+ cancel_delayed_work_sync(&ddata->bootup_work);
+ cancel_delayed_work_sync(&ddata->status_work);
+
+ return 0;
+}
+
+static struct platform_driver phy_mdm6600_driver = {
+ .probe = phy_mdm6600_probe,
+ .remove = phy_mdm6600_remove,
+ .driver = {
+ .name = "phy-mapphone-mdm6600",
+ .pm = &phy_mdm6600_pm_ops,
+ .of_match_table = of_match_ptr(phy_mdm6600_id_table),
+ },
+};
+
+module_platform_driver(phy_mdm6600_driver);
+
+MODULE_ALIAS("platform:gpio_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("mdm6600 gpio usb phy driver");
+MODULE_LICENSE("GPL v2");