summaryrefslogtreecommitdiffstats
path: root/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/rockchip/phy-rockchip-inno-hdmi.c')
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-hdmi.c1283
1 files changed, 1283 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
new file mode 100644
index 000000000..2556caf47
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -0,0 +1,1283 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2017 Rockchip Electronics Co. Ltd.
+ *
+ * Author: Zheng Yang <zhengyang@rock-chips.com>
+ * Heiko Stuebner <heiko@sntech.de>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define UPDATE(x, h, l) (((x) << (l)) & GENMASK((h), (l)))
+
+/* REG: 0x00 */
+#define RK3228_PRE_PLL_REFCLK_SEL_PCLK BIT(0)
+/* REG: 0x01 */
+#define RK3228_BYPASS_RXSENSE_EN BIT(2)
+#define RK3228_BYPASS_PWRON_EN BIT(1)
+#define RK3228_BYPASS_PLLPD_EN BIT(0)
+/* REG: 0x02 */
+#define RK3228_BYPASS_PDATA_EN BIT(4)
+#define RK3228_PDATAEN_DISABLE BIT(0)
+/* REG: 0x03 */
+#define RK3228_BYPASS_AUTO_TERM_RES_CAL BIT(7)
+#define RK3228_AUTO_TERM_RES_CAL_SPEED_14_8(x) UPDATE(x, 6, 0)
+/* REG: 0x04 */
+#define RK3228_AUTO_TERM_RES_CAL_SPEED_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xaa */
+#define RK3228_POST_PLL_CTRL_MANUAL BIT(0)
+/* REG: 0xe0 */
+#define RK3228_POST_PLL_POWER_DOWN BIT(5)
+#define RK3228_PRE_PLL_POWER_DOWN BIT(4)
+#define RK3228_RXSENSE_CLK_CH_ENABLE BIT(3)
+#define RK3228_RXSENSE_DATA_CH2_ENABLE BIT(2)
+#define RK3228_RXSENSE_DATA_CH1_ENABLE BIT(1)
+#define RK3228_RXSENSE_DATA_CH0_ENABLE BIT(0)
+/* REG: 0xe1 */
+#define RK3228_BANDGAP_ENABLE BIT(4)
+#define RK3228_TMDS_DRIVER_ENABLE GENMASK(3, 0)
+/* REG: 0xe2 */
+#define RK3228_PRE_PLL_FB_DIV_8_MASK BIT(7)
+#define RK3228_PRE_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
+#define RK3228_PCLK_VCO_DIV_5_MASK BIT(5)
+#define RK3228_PCLK_VCO_DIV_5(x) UPDATE(x, 5, 5)
+#define RK3228_PRE_PLL_PRE_DIV_MASK GENMASK(4, 0)
+#define RK3228_PRE_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
+/* REG: 0xe3 */
+#define RK3228_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xe4 */
+#define RK3228_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_B_SHIFT 5
+#define RK3228_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
+#define RK3228_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
+/* REG: 0xe5 */
+#define RK3228_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
+#define RK3228_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
+#define RK3228_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
+/* REG: 0xe6 */
+#define RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(5, 4)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 5, 4)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(3, 2)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 3, 2)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(1, 0)
+#define RK3228_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 1, 0)
+/* REG: 0xe8 */
+#define RK3228_PRE_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xe9 */
+#define RK3228_POST_PLL_POST_DIV_ENABLE UPDATE(3, 7, 6)
+#define RK3228_POST_PLL_PRE_DIV_MASK GENMASK(4, 0)
+#define RK3228_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
+/* REG: 0xea */
+#define RK3228_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xeb */
+#define RK3228_POST_PLL_FB_DIV_8_MASK BIT(7)
+#define RK3228_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
+#define RK3228_POST_PLL_POST_DIV_MASK GENMASK(5, 4)
+#define RK3228_POST_PLL_POST_DIV(x) UPDATE(x, 5, 4)
+#define RK3228_POST_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xee */
+#define RK3228_TMDS_CH_TA_ENABLE GENMASK(7, 4)
+/* REG: 0xef */
+#define RK3228_TMDS_CLK_CH_TA(x) UPDATE(x, 7, 6)
+#define RK3228_TMDS_DATA_CH2_TA(x) UPDATE(x, 5, 4)
+#define RK3228_TMDS_DATA_CH1_TA(x) UPDATE(x, 3, 2)
+#define RK3228_TMDS_DATA_CH0_TA(x) UPDATE(x, 1, 0)
+/* REG: 0xf0 */
+#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS_MASK GENMASK(5, 4)
+#define RK3228_TMDS_DATA_CH2_PRE_EMPHASIS(x) UPDATE(x, 5, 4)
+#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS_MASK GENMASK(3, 2)
+#define RK3228_TMDS_DATA_CH1_PRE_EMPHASIS(x) UPDATE(x, 3, 2)
+#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS_MASK GENMASK(1, 0)
+#define RK3228_TMDS_DATA_CH0_PRE_EMPHASIS(x) UPDATE(x, 1, 0)
+/* REG: 0xf1 */
+#define RK3228_TMDS_CLK_CH_OUTPUT_SWING(x) UPDATE(x, 7, 4)
+#define RK3228_TMDS_DATA_CH2_OUTPUT_SWING(x) UPDATE(x, 3, 0)
+/* REG: 0xf2 */
+#define RK3228_TMDS_DATA_CH1_OUTPUT_SWING(x) UPDATE(x, 7, 4)
+#define RK3228_TMDS_DATA_CH0_OUTPUT_SWING(x) UPDATE(x, 3, 0)
+
+/* REG: 0x01 */
+#define RK3328_BYPASS_RXSENSE_EN BIT(2)
+#define RK3328_BYPASS_POWERON_EN BIT(1)
+#define RK3328_BYPASS_PLLPD_EN BIT(0)
+/* REG: 0x02 */
+#define RK3328_INT_POL_HIGH BIT(7)
+#define RK3328_BYPASS_PDATA_EN BIT(4)
+#define RK3328_PDATA_EN BIT(0)
+/* REG:0x05 */
+#define RK3328_INT_TMDS_CLK(x) UPDATE(x, 7, 4)
+#define RK3328_INT_TMDS_D2(x) UPDATE(x, 3, 0)
+/* REG:0x07 */
+#define RK3328_INT_TMDS_D1(x) UPDATE(x, 7, 4)
+#define RK3328_INT_TMDS_D0(x) UPDATE(x, 3, 0)
+/* for all RK3328_INT_TMDS_*, ESD_DET as defined in 0xc8-0xcb */
+#define RK3328_INT_AGND_LOW_PULSE_LOCKED BIT(3)
+#define RK3328_INT_RXSENSE_LOW_PULSE_LOCKED BIT(2)
+#define RK3328_INT_VSS_AGND_ESD_DET BIT(1)
+#define RK3328_INT_AGND_VSS_ESD_DET BIT(0)
+/* REG: 0xa0 */
+#define RK3328_PCLK_VCO_DIV_5_MASK BIT(1)
+#define RK3328_PCLK_VCO_DIV_5(x) UPDATE(x, 1, 1)
+#define RK3328_PRE_PLL_POWER_DOWN BIT(0)
+/* REG: 0xa1 */
+#define RK3328_PRE_PLL_PRE_DIV_MASK GENMASK(5, 0)
+#define RK3328_PRE_PLL_PRE_DIV(x) UPDATE(x, 5, 0)
+/* REG: 0xa2 */
+/* unset means center spread */
+#define RK3328_SPREAD_SPECTRUM_MOD_DOWN BIT(7)
+#define RK3328_SPREAD_SPECTRUM_MOD_DISABLE BIT(6)
+#define RK3328_PRE_PLL_FRAC_DIV_DISABLE UPDATE(3, 5, 4)
+#define RK3328_PRE_PLL_FB_DIV_11_8_MASK GENMASK(3, 0)
+#define RK3328_PRE_PLL_FB_DIV_11_8(x) UPDATE((x) >> 8, 3, 0)
+/* REG: 0xa3 */
+#define RK3328_PRE_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xa4*/
+#define RK3328_PRE_PLL_TMDSCLK_DIV_C_MASK GENMASK(1, 0)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_C(x) UPDATE(x, 1, 0)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_B_MASK GENMASK(3, 2)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_B(x) UPDATE(x, 3, 2)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_A_MASK GENMASK(5, 4)
+#define RK3328_PRE_PLL_TMDSCLK_DIV_A(x) UPDATE(x, 5, 4)
+/* REG: 0xa5 */
+#define RK3328_PRE_PLL_PCLK_DIV_B_SHIFT 5
+#define RK3328_PRE_PLL_PCLK_DIV_B_MASK GENMASK(6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_B(x) UPDATE(x, 6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_A_MASK GENMASK(4, 0)
+#define RK3328_PRE_PLL_PCLK_DIV_A(x) UPDATE(x, 4, 0)
+/* REG: 0xa6 */
+#define RK3328_PRE_PLL_PCLK_DIV_C_SHIFT 5
+#define RK3328_PRE_PLL_PCLK_DIV_C_MASK GENMASK(6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_C(x) UPDATE(x, 6, 5)
+#define RK3328_PRE_PLL_PCLK_DIV_D_MASK GENMASK(4, 0)
+#define RK3328_PRE_PLL_PCLK_DIV_D(x) UPDATE(x, 4, 0)
+/* REG: 0xa9 */
+#define RK3328_PRE_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xaa */
+#define RK3328_POST_PLL_POST_DIV_ENABLE GENMASK(3, 2)
+#define RK3328_POST_PLL_REFCLK_SEL_TMDS BIT(1)
+#define RK3328_POST_PLL_POWER_DOWN BIT(0)
+/* REG:0xab */
+#define RK3328_POST_PLL_FB_DIV_8(x) UPDATE((x) >> 8, 7, 7)
+#define RK3328_POST_PLL_PRE_DIV(x) UPDATE(x, 4, 0)
+/* REG: 0xac */
+#define RK3328_POST_PLL_FB_DIV_7_0(x) UPDATE(x, 7, 0)
+/* REG: 0xad */
+#define RK3328_POST_PLL_POST_DIV_MASK GENMASK(1, 0)
+#define RK3328_POST_PLL_POST_DIV_2 0x0
+#define RK3328_POST_PLL_POST_DIV_4 0x1
+#define RK3328_POST_PLL_POST_DIV_8 0x3
+/* REG: 0xaf */
+#define RK3328_POST_PLL_LOCK_STATUS BIT(0)
+/* REG: 0xb0 */
+#define RK3328_BANDGAP_ENABLE BIT(2)
+/* REG: 0xb2 */
+#define RK3328_TMDS_CLK_DRIVER_EN BIT(3)
+#define RK3328_TMDS_D2_DRIVER_EN BIT(2)
+#define RK3328_TMDS_D1_DRIVER_EN BIT(1)
+#define RK3328_TMDS_D0_DRIVER_EN BIT(0)
+#define RK3328_TMDS_DRIVER_ENABLE (RK3328_TMDS_CLK_DRIVER_EN | \
+ RK3328_TMDS_D2_DRIVER_EN | \
+ RK3328_TMDS_D1_DRIVER_EN | \
+ RK3328_TMDS_D0_DRIVER_EN)
+/* REG:0xc5 */
+#define RK3328_BYPASS_TERM_RESISTOR_CALIB BIT(7)
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(x) UPDATE((x) >> 8, 6, 0)
+/* REG:0xc6 */
+#define RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(x) UPDATE(x, 7, 0)
+/* REG:0xc7 */
+#define RK3328_TERM_RESISTOR_50 UPDATE(0, 2, 1)
+#define RK3328_TERM_RESISTOR_62_5 UPDATE(1, 2, 1)
+#define RK3328_TERM_RESISTOR_75 UPDATE(2, 2, 1)
+#define RK3328_TERM_RESISTOR_100 UPDATE(3, 2, 1)
+/* REG 0xc8 - 0xcb */
+#define RK3328_ESD_DETECT_MASK GENMASK(7, 6)
+#define RK3328_ESD_DETECT_340MV (0x0 << 6)
+#define RK3328_ESD_DETECT_280MV (0x1 << 6)
+#define RK3328_ESD_DETECT_260MV (0x2 << 6)
+#define RK3328_ESD_DETECT_240MV (0x3 << 6)
+/* resistors can be used in parallel */
+#define RK3328_TMDS_TERM_RESIST_MASK GENMASK(5, 0)
+#define RK3328_TMDS_TERM_RESIST_75 BIT(5)
+#define RK3328_TMDS_TERM_RESIST_150 BIT(4)
+#define RK3328_TMDS_TERM_RESIST_300 BIT(3)
+#define RK3328_TMDS_TERM_RESIST_600 BIT(2)
+#define RK3328_TMDS_TERM_RESIST_1000 BIT(1)
+#define RK3328_TMDS_TERM_RESIST_2000 BIT(0)
+/* REG: 0xd1 */
+#define RK3328_PRE_PLL_FRAC_DIV_23_16(x) UPDATE((x) >> 16, 7, 0)
+/* REG: 0xd2 */
+#define RK3328_PRE_PLL_FRAC_DIV_15_8(x) UPDATE((x) >> 8, 7, 0)
+/* REG: 0xd3 */
+#define RK3328_PRE_PLL_FRAC_DIV_7_0(x) UPDATE(x, 7, 0)
+
+struct inno_hdmi_phy_drv_data;
+
+struct inno_hdmi_phy {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+
+ struct phy *phy;
+ struct clk *sysclk;
+ struct clk *refoclk;
+ struct clk *refpclk;
+
+ /* platform data */
+ const struct inno_hdmi_phy_drv_data *plat_data;
+ int chip_version;
+
+ /* clk provider */
+ struct clk_hw hw;
+ struct clk *phyclk;
+ unsigned long pixclock;
+};
+
+struct pre_pll_config {
+ unsigned long pixclock;
+ unsigned long tmdsclock;
+ u8 prediv;
+ u16 fbdiv;
+ u8 tmds_div_a;
+ u8 tmds_div_b;
+ u8 tmds_div_c;
+ u8 pclk_div_a;
+ u8 pclk_div_b;
+ u8 pclk_div_c;
+ u8 pclk_div_d;
+ u8 vco_div_5_en;
+ u32 fracdiv;
+};
+
+struct post_pll_config {
+ unsigned long tmdsclock;
+ u8 prediv;
+ u16 fbdiv;
+ u8 postdiv;
+ u8 version;
+};
+
+struct phy_config {
+ unsigned long tmdsclock;
+ u8 regs[14];
+};
+
+struct inno_hdmi_phy_ops {
+ int (*init)(struct inno_hdmi_phy *inno);
+ int (*power_on)(struct inno_hdmi_phy *inno,
+ const struct post_pll_config *cfg,
+ const struct phy_config *phy_cfg);
+ void (*power_off)(struct inno_hdmi_phy *inno);
+};
+
+struct inno_hdmi_phy_drv_data {
+ const struct inno_hdmi_phy_ops *ops;
+ const struct clk_ops *clk_ops;
+ const struct phy_config *phy_cfg_table;
+};
+
+static const struct pre_pll_config pre_pll_cfg_table[] = {
+ { 27000000, 27000000, 1, 90, 3, 2, 2, 10, 3, 3, 4, 0, 0},
+ { 27000000, 33750000, 1, 90, 1, 3, 3, 10, 3, 3, 4, 0, 0},
+ { 40000000, 40000000, 1, 80, 2, 2, 2, 12, 2, 2, 2, 0, 0},
+ { 59341000, 59341000, 1, 98, 3, 1, 2, 1, 3, 3, 4, 0, 0xE6AE6B},
+ { 59400000, 59400000, 1, 99, 3, 1, 1, 1, 3, 3, 4, 0, 0},
+ { 59341000, 74176250, 1, 98, 0, 3, 3, 1, 3, 3, 4, 0, 0xE6AE6B},
+ { 59400000, 74250000, 1, 99, 1, 2, 2, 1, 3, 3, 4, 0, 0},
+ { 74176000, 74176000, 1, 98, 1, 2, 2, 1, 2, 3, 4, 0, 0xE6AE6B},
+ { 74250000, 74250000, 1, 99, 1, 2, 2, 1, 2, 3, 4, 0, 0},
+ { 74176000, 92720000, 4, 494, 1, 2, 2, 1, 3, 3, 4, 0, 0x816817},
+ { 74250000, 92812500, 4, 495, 1, 2, 2, 1, 3, 3, 4, 0, 0},
+ {148352000, 148352000, 1, 98, 1, 1, 1, 1, 2, 2, 2, 0, 0xE6AE6B},
+ {148500000, 148500000, 1, 99, 1, 1, 1, 1, 2, 2, 2, 0, 0},
+ {148352000, 185440000, 4, 494, 0, 2, 2, 1, 3, 2, 2, 0, 0x816817},
+ {148500000, 185625000, 4, 495, 0, 2, 2, 1, 3, 2, 2, 0, 0},
+ {296703000, 296703000, 1, 98, 0, 1, 1, 1, 0, 2, 2, 0, 0xE6AE6B},
+ {297000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 2, 0, 0},
+ {296703000, 370878750, 4, 494, 1, 2, 0, 1, 3, 1, 1, 0, 0x816817},
+ {297000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 0, 0},
+ {593407000, 296703500, 1, 98, 0, 1, 1, 1, 0, 2, 1, 0, 0xE6AE6B},
+ {594000000, 297000000, 1, 99, 0, 1, 1, 1, 0, 2, 1, 0, 0},
+ {593407000, 370879375, 4, 494, 1, 2, 0, 1, 3, 1, 1, 1, 0x816817},
+ {594000000, 371250000, 4, 495, 1, 2, 0, 1, 3, 1, 1, 1, 0},
+ {593407000, 593407000, 1, 98, 0, 2, 0, 1, 0, 1, 1, 0, 0xE6AE6B},
+ {594000000, 594000000, 1, 99, 0, 2, 0, 1, 0, 1, 1, 0, 0},
+ { /* sentinel */ }
+};
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+ {33750000, 1, 40, 8, 1},
+ {33750000, 1, 80, 8, 2},
+ {74250000, 1, 40, 8, 1},
+ {74250000, 18, 80, 8, 2},
+ {148500000, 2, 40, 4, 3},
+ {297000000, 4, 40, 2, 3},
+ {594000000, 8, 40, 1, 3},
+ { /* sentinel */ }
+};
+
+/* phy tuning values for an undocumented set of registers */
+static const struct phy_config rk3228_phy_cfg[] = {
+ { 165000000, {
+ 0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ }, {
+ 340000000, {
+ 0xaa, 0x15, 0x6a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ }, {
+ 594000000, {
+ 0xaa, 0x15, 0x7a, 0xaa, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ },
+ }, { /* sentinel */ },
+};
+
+/* phy tuning values for an undocumented set of registers */
+static const struct phy_config rk3328_phy_cfg[] = {
+ { 165000000, {
+ 0x07, 0x0a, 0x0a, 0x0a, 0x00, 0x00, 0x08, 0x08, 0x08,
+ 0x00, 0xac, 0xcc, 0xcc, 0xcc,
+ },
+ }, {
+ 340000000, {
+ 0x0b, 0x0d, 0x0d, 0x0d, 0x07, 0x15, 0x08, 0x08, 0x08,
+ 0x3f, 0xac, 0xcc, 0xcd, 0xdd,
+ },
+ }, {
+ 594000000, {
+ 0x10, 0x1a, 0x1a, 0x1a, 0x07, 0x15, 0x08, 0x08, 0x08,
+ 0x00, 0xac, 0xcc, 0xcc, 0xcc,
+ },
+ }, { /* sentinel */ },
+};
+
+static inline struct inno_hdmi_phy *to_inno_hdmi_phy(struct clk_hw *hw)
+{
+ return container_of(hw, struct inno_hdmi_phy, hw);
+}
+
+/*
+ * The register description of the IP block does not use any distinct names
+ * but instead the databook simply numbers the registers in one-increments.
+ * As the registers are obviously 32bit sized, the inno_* functions
+ * translate the databook register names to the actual registers addresses.
+ */
+static inline void inno_write(struct inno_hdmi_phy *inno, u32 reg, u8 val)
+{
+ regmap_write(inno->regmap, reg * 4, val);
+}
+
+static inline u8 inno_read(struct inno_hdmi_phy *inno, u32 reg)
+{
+ u32 val;
+
+ regmap_read(inno->regmap, reg * 4, &val);
+
+ return val;
+}
+
+static inline void inno_update_bits(struct inno_hdmi_phy *inno, u8 reg,
+ u8 mask, u8 val)
+{
+ regmap_update_bits(inno->regmap, reg * 4, mask, val);
+}
+
+#define inno_poll(inno, reg, val, cond, sleep_us, timeout_us) \
+ regmap_read_poll_timeout((inno)->regmap, (reg) * 4, val, cond, \
+ sleep_us, timeout_us)
+
+static unsigned long inno_hdmi_phy_get_tmdsclk(struct inno_hdmi_phy *inno,
+ unsigned long rate)
+{
+ int bus_width = phy_get_bus_width(inno->phy);
+
+ switch (bus_width) {
+ case 4:
+ case 5:
+ case 6:
+ case 10:
+ case 12:
+ case 16:
+ return (u64)rate * bus_width / 8;
+ default:
+ return rate;
+ }
+}
+
+static irqreturn_t inno_hdmi_phy_rk3328_hardirq(int irq, void *dev_id)
+{
+ struct inno_hdmi_phy *inno = dev_id;
+ int intr_stat1, intr_stat2, intr_stat3;
+
+ intr_stat1 = inno_read(inno, 0x04);
+ intr_stat2 = inno_read(inno, 0x06);
+ intr_stat3 = inno_read(inno, 0x08);
+
+ if (intr_stat1)
+ inno_write(inno, 0x04, intr_stat1);
+ if (intr_stat2)
+ inno_write(inno, 0x06, intr_stat2);
+ if (intr_stat3)
+ inno_write(inno, 0x08, intr_stat3);
+
+ if (intr_stat1 || intr_stat2 || intr_stat3)
+ return IRQ_WAKE_THREAD;
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t inno_hdmi_phy_rk3328_irq(int irq, void *dev_id)
+{
+ struct inno_hdmi_phy *inno = dev_id;
+
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
+ usleep_range(10, 20);
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
+
+ return IRQ_HANDLED;
+}
+
+static int inno_hdmi_phy_power_on(struct phy *phy)
+{
+ struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
+ const struct post_pll_config *cfg = post_pll_cfg_table;
+ const struct phy_config *phy_cfg = inno->plat_data->phy_cfg_table;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno,
+ inno->pixclock);
+ int ret;
+
+ if (!tmdsclock) {
+ dev_err(inno->dev, "TMDS clock is zero!\n");
+ return -EINVAL;
+ }
+
+ if (!inno->plat_data->ops->power_on)
+ return -EINVAL;
+
+ for (; cfg->tmdsclock != 0; cfg++)
+ if (tmdsclock <= cfg->tmdsclock &&
+ cfg->version & inno->chip_version)
+ break;
+
+ for (; phy_cfg->tmdsclock != 0; phy_cfg++)
+ if (tmdsclock <= phy_cfg->tmdsclock)
+ break;
+
+ if (cfg->tmdsclock == 0 || phy_cfg->tmdsclock == 0)
+ return -EINVAL;
+
+ dev_dbg(inno->dev, "Inno HDMI PHY Power On\n");
+
+ ret = clk_prepare_enable(inno->phyclk);
+ if (ret)
+ return ret;
+
+ ret = inno->plat_data->ops->power_on(inno, cfg, phy_cfg);
+ if (ret) {
+ clk_disable_unprepare(inno->phyclk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int inno_hdmi_phy_power_off(struct phy *phy)
+{
+ struct inno_hdmi_phy *inno = phy_get_drvdata(phy);
+
+ if (!inno->plat_data->ops->power_off)
+ return -EINVAL;
+
+ inno->plat_data->ops->power_off(inno);
+
+ clk_disable_unprepare(inno->phyclk);
+
+ dev_dbg(inno->dev, "Inno HDMI PHY Power Off\n");
+
+ return 0;
+}
+
+static const struct phy_ops inno_hdmi_phy_ops = {
+ .owner = THIS_MODULE,
+ .power_on = inno_hdmi_phy_power_on,
+ .power_off = inno_hdmi_phy_power_off,
+};
+
+static const
+struct pre_pll_config *inno_hdmi_phy_get_pre_pll_cfg(struct inno_hdmi_phy *inno,
+ unsigned long rate)
+{
+ const struct pre_pll_config *cfg = pre_pll_cfg_table;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+
+ for (; cfg->pixclock != 0; cfg++)
+ if (cfg->pixclock == rate && cfg->tmdsclock == tmdsclock)
+ break;
+
+ if (cfg->pixclock == 0)
+ return ERR_PTR(-EINVAL);
+
+ return cfg;
+}
+
+static int inno_hdmi_phy_rk3228_clk_is_prepared(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ u8 status;
+
+ status = inno_read(inno, 0xe0) & RK3228_PRE_PLL_POWER_DOWN;
+ return status ? 0 : 1;
+}
+
+static int inno_hdmi_phy_rk3228_clk_prepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3228_clk_unprepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
+ RK3228_PRE_PLL_POWER_DOWN);
+}
+
+static
+unsigned long inno_hdmi_phy_rk3228_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ u8 nd, no_a, no_b, no_d;
+ u64 vco;
+ u16 nf;
+
+ nd = inno_read(inno, 0xe2) & RK3228_PRE_PLL_PRE_DIV_MASK;
+ nf = (inno_read(inno, 0xe2) & RK3228_PRE_PLL_FB_DIV_8_MASK) << 1;
+ nf |= inno_read(inno, 0xe3);
+ vco = parent_rate * nf;
+
+ if (inno_read(inno, 0xe2) & RK3228_PCLK_VCO_DIV_5_MASK) {
+ do_div(vco, nd * 5);
+ } else {
+ no_a = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_A_MASK;
+ if (!no_a)
+ no_a = 1;
+ no_b = inno_read(inno, 0xe4) & RK3228_PRE_PLL_PCLK_DIV_B_MASK;
+ no_b >>= RK3228_PRE_PLL_PCLK_DIV_B_SHIFT;
+ no_b += 2;
+ no_d = inno_read(inno, 0xe5) & RK3228_PRE_PLL_PCLK_DIV_D_MASK;
+
+ do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
+ }
+
+ inno->pixclock = vco;
+
+ dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
+
+ return vco;
+}
+
+static long inno_hdmi_phy_rk3228_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+ rate = (rate / 1000) * 1000;
+
+ for (; cfg->pixclock != 0; cfg++)
+ if (cfg->pixclock == rate && !cfg->fracdiv)
+ break;
+
+ if (cfg->pixclock == 0)
+ return -EINVAL;
+
+ return cfg->pixclock;
+}
+
+static int inno_hdmi_phy_rk3228_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ const struct pre_pll_config *cfg;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+ u32 v;
+ int ret;
+
+ dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
+ __func__, rate, tmdsclock);
+
+ cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
+
+ /* Power down PRE-PLL */
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN,
+ RK3228_PRE_PLL_POWER_DOWN);
+
+ inno_update_bits(inno, 0xe2, RK3228_PRE_PLL_FB_DIV_8_MASK |
+ RK3228_PCLK_VCO_DIV_5_MASK |
+ RK3228_PRE_PLL_PRE_DIV_MASK,
+ RK3228_PRE_PLL_FB_DIV_8(cfg->fbdiv) |
+ RK3228_PCLK_VCO_DIV_5(cfg->vco_div_5_en) |
+ RK3228_PRE_PLL_PRE_DIV(cfg->prediv));
+ inno_write(inno, 0xe3, RK3228_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
+ inno_update_bits(inno, 0xe4, RK3228_PRE_PLL_PCLK_DIV_B_MASK |
+ RK3228_PRE_PLL_PCLK_DIV_A_MASK,
+ RK3228_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b) |
+ RK3228_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a));
+ inno_update_bits(inno, 0xe5, RK3228_PRE_PLL_PCLK_DIV_C_MASK |
+ RK3228_PRE_PLL_PCLK_DIV_D_MASK,
+ RK3228_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
+ RK3228_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
+ inno_update_bits(inno, 0xe6, RK3228_PRE_PLL_TMDSCLK_DIV_C_MASK |
+ RK3228_PRE_PLL_TMDSCLK_DIV_A_MASK |
+ RK3228_PRE_PLL_TMDSCLK_DIV_B_MASK,
+ RK3228_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
+ RK3228_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
+ RK3228_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
+
+ /* Power up PRE-PLL */
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN, 0);
+
+ /* Wait for Pre-PLL lock */
+ ret = inno_poll(inno, 0xe8, v, v & RK3228_PRE_PLL_LOCK_STATUS,
+ 100, 100000);
+ if (ret) {
+ dev_err(inno->dev, "Pre-PLL locking failed\n");
+ return ret;
+ }
+
+ inno->pixclock = rate;
+
+ return 0;
+}
+
+static const struct clk_ops inno_hdmi_phy_rk3228_clk_ops = {
+ .prepare = inno_hdmi_phy_rk3228_clk_prepare,
+ .unprepare = inno_hdmi_phy_rk3228_clk_unprepare,
+ .is_prepared = inno_hdmi_phy_rk3228_clk_is_prepared,
+ .recalc_rate = inno_hdmi_phy_rk3228_clk_recalc_rate,
+ .round_rate = inno_hdmi_phy_rk3228_clk_round_rate,
+ .set_rate = inno_hdmi_phy_rk3228_clk_set_rate,
+};
+
+static int inno_hdmi_phy_rk3328_clk_is_prepared(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ u8 status;
+
+ status = inno_read(inno, 0xa0) & RK3328_PRE_PLL_POWER_DOWN;
+ return status ? 0 : 1;
+}
+
+static int inno_hdmi_phy_rk3328_clk_prepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3328_clk_unprepare(struct clk_hw *hw)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
+ RK3328_PRE_PLL_POWER_DOWN);
+}
+
+static
+unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ unsigned long frac;
+ u8 nd, no_a, no_b, no_c, no_d;
+ u64 vco;
+ u16 nf;
+
+ nd = inno_read(inno, 0xa1) & RK3328_PRE_PLL_PRE_DIV_MASK;
+ nf = ((inno_read(inno, 0xa2) & RK3328_PRE_PLL_FB_DIV_11_8_MASK) << 8);
+ nf |= inno_read(inno, 0xa3);
+ vco = parent_rate * nf;
+
+ if (!(inno_read(inno, 0xa2) & RK3328_PRE_PLL_FRAC_DIV_DISABLE)) {
+ frac = inno_read(inno, 0xd3) |
+ (inno_read(inno, 0xd2) << 8) |
+ (inno_read(inno, 0xd1) << 16);
+ vco += DIV_ROUND_CLOSEST(parent_rate * frac, (1 << 24));
+ }
+
+ if (inno_read(inno, 0xa0) & RK3328_PCLK_VCO_DIV_5_MASK) {
+ do_div(vco, nd * 5);
+ } else {
+ no_a = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_A_MASK;
+ no_b = inno_read(inno, 0xa5) & RK3328_PRE_PLL_PCLK_DIV_B_MASK;
+ no_b >>= RK3328_PRE_PLL_PCLK_DIV_B_SHIFT;
+ no_b += 2;
+ no_c = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_C_MASK;
+ no_c >>= RK3328_PRE_PLL_PCLK_DIV_C_SHIFT;
+ no_c = 1 << no_c;
+ no_d = inno_read(inno, 0xa6) & RK3328_PRE_PLL_PCLK_DIV_D_MASK;
+
+ do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
+ }
+
+ inno->pixclock = DIV_ROUND_CLOSEST((unsigned long)vco, 1000) * 1000;
+
+ dev_dbg(inno->dev, "%s rate %lu vco %llu\n",
+ __func__, inno->pixclock, vco);
+
+ return inno->pixclock;
+}
+
+static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ const struct pre_pll_config *cfg = pre_pll_cfg_table;
+
+ rate = (rate / 1000) * 1000;
+
+ for (; cfg->pixclock != 0; cfg++)
+ if (cfg->pixclock == rate)
+ break;
+
+ if (cfg->pixclock == 0)
+ return -EINVAL;
+
+ return cfg->pixclock;
+}
+
+static int inno_hdmi_phy_rk3328_clk_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct inno_hdmi_phy *inno = to_inno_hdmi_phy(hw);
+ const struct pre_pll_config *cfg;
+ unsigned long tmdsclock = inno_hdmi_phy_get_tmdsclk(inno, rate);
+ u32 val;
+ int ret;
+
+ dev_dbg(inno->dev, "%s rate %lu tmdsclk %lu\n",
+ __func__, rate, tmdsclock);
+
+ cfg = inno_hdmi_phy_get_pre_pll_cfg(inno, rate);
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN,
+ RK3328_PRE_PLL_POWER_DOWN);
+
+ /* Configure pre-pll */
+ inno_update_bits(inno, 0xa0, RK3328_PCLK_VCO_DIV_5_MASK,
+ RK3328_PCLK_VCO_DIV_5(cfg->vco_div_5_en));
+ inno_write(inno, 0xa1, RK3328_PRE_PLL_PRE_DIV(cfg->prediv));
+
+ val = RK3328_SPREAD_SPECTRUM_MOD_DISABLE;
+ if (!cfg->fracdiv)
+ val |= RK3328_PRE_PLL_FRAC_DIV_DISABLE;
+ inno_write(inno, 0xa2, RK3328_PRE_PLL_FB_DIV_11_8(cfg->fbdiv) | val);
+ inno_write(inno, 0xa3, RK3328_PRE_PLL_FB_DIV_7_0(cfg->fbdiv));
+ inno_write(inno, 0xa5, RK3328_PRE_PLL_PCLK_DIV_A(cfg->pclk_div_a) |
+ RK3328_PRE_PLL_PCLK_DIV_B(cfg->pclk_div_b));
+ inno_write(inno, 0xa6, RK3328_PRE_PLL_PCLK_DIV_C(cfg->pclk_div_c) |
+ RK3328_PRE_PLL_PCLK_DIV_D(cfg->pclk_div_d));
+ inno_write(inno, 0xa4, RK3328_PRE_PLL_TMDSCLK_DIV_C(cfg->tmds_div_c) |
+ RK3328_PRE_PLL_TMDSCLK_DIV_A(cfg->tmds_div_a) |
+ RK3328_PRE_PLL_TMDSCLK_DIV_B(cfg->tmds_div_b));
+ inno_write(inno, 0xd3, RK3328_PRE_PLL_FRAC_DIV_7_0(cfg->fracdiv));
+ inno_write(inno, 0xd2, RK3328_PRE_PLL_FRAC_DIV_15_8(cfg->fracdiv));
+ inno_write(inno, 0xd1, RK3328_PRE_PLL_FRAC_DIV_23_16(cfg->fracdiv));
+
+ inno_update_bits(inno, 0xa0, RK3328_PRE_PLL_POWER_DOWN, 0);
+
+ /* Wait for Pre-PLL lock */
+ ret = inno_poll(inno, 0xa9, val, val & RK3328_PRE_PLL_LOCK_STATUS,
+ 1000, 10000);
+ if (ret) {
+ dev_err(inno->dev, "Pre-PLL locking failed\n");
+ return ret;
+ }
+
+ inno->pixclock = rate;
+
+ return 0;
+}
+
+static const struct clk_ops inno_hdmi_phy_rk3328_clk_ops = {
+ .prepare = inno_hdmi_phy_rk3328_clk_prepare,
+ .unprepare = inno_hdmi_phy_rk3328_clk_unprepare,
+ .is_prepared = inno_hdmi_phy_rk3328_clk_is_prepared,
+ .recalc_rate = inno_hdmi_phy_rk3328_clk_recalc_rate,
+ .round_rate = inno_hdmi_phy_rk3328_clk_round_rate,
+ .set_rate = inno_hdmi_phy_rk3328_clk_set_rate,
+};
+
+static int inno_hdmi_phy_clk_register(struct inno_hdmi_phy *inno)
+{
+ struct device *dev = inno->dev;
+ struct device_node *np = dev->of_node;
+ struct clk_init_data init;
+ const char *parent_name;
+ int ret;
+
+ parent_name = __clk_get_name(inno->refoclk);
+
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+ init.flags = 0;
+ init.name = "pin_hd20_pclk";
+ init.ops = inno->plat_data->clk_ops;
+
+ /* optional override of the clock name */
+ of_property_read_string(np, "clock-output-names", &init.name);
+
+ inno->hw.init = &init;
+
+ inno->phyclk = devm_clk_register(dev, &inno->hw);
+ if (IS_ERR(inno->phyclk)) {
+ ret = PTR_ERR(inno->phyclk);
+ dev_err(dev, "failed to register clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = of_clk_add_provider(np, of_clk_src_simple_get, inno->phyclk);
+ if (ret) {
+ dev_err(dev, "failed to register clock provider: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int inno_hdmi_phy_rk3228_init(struct inno_hdmi_phy *inno)
+{
+ /*
+ * Use phy internal register control
+ * rxsense/poweron/pllpd/pdataen signal.
+ */
+ inno_write(inno, 0x01, RK3228_BYPASS_RXSENSE_EN |
+ RK3228_BYPASS_PWRON_EN |
+ RK3228_BYPASS_PLLPD_EN);
+ inno_update_bits(inno, 0x02, RK3228_BYPASS_PDATA_EN,
+ RK3228_BYPASS_PDATA_EN);
+
+ /* manual power down post-PLL */
+ inno_update_bits(inno, 0xaa, RK3228_POST_PLL_CTRL_MANUAL,
+ RK3228_POST_PLL_CTRL_MANUAL);
+
+ inno->chip_version = 1;
+
+ return 0;
+}
+
+static int
+inno_hdmi_phy_rk3228_power_on(struct inno_hdmi_phy *inno,
+ const struct post_pll_config *cfg,
+ const struct phy_config *phy_cfg)
+{
+ int ret;
+ u32 v;
+
+ inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE,
+ RK3228_PDATAEN_DISABLE);
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
+ RK3228_POST_PLL_POWER_DOWN,
+ RK3228_PRE_PLL_POWER_DOWN |
+ RK3228_POST_PLL_POWER_DOWN);
+
+ /* Post-PLL update */
+ inno_update_bits(inno, 0xe9, RK3228_POST_PLL_PRE_DIV_MASK,
+ RK3228_POST_PLL_PRE_DIV(cfg->prediv));
+ inno_update_bits(inno, 0xeb, RK3228_POST_PLL_FB_DIV_8_MASK,
+ RK3228_POST_PLL_FB_DIV_8(cfg->fbdiv));
+ inno_write(inno, 0xea, RK3228_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
+
+ if (cfg->postdiv == 1) {
+ inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
+ 0);
+ } else {
+ int div = cfg->postdiv / 2 - 1;
+
+ inno_update_bits(inno, 0xe9, RK3228_POST_PLL_POST_DIV_ENABLE,
+ RK3228_POST_PLL_POST_DIV_ENABLE);
+ inno_update_bits(inno, 0xeb, RK3228_POST_PLL_POST_DIV_MASK,
+ RK3228_POST_PLL_POST_DIV(div));
+ }
+
+ for (v = 0; v < 4; v++)
+ inno_write(inno, 0xef + v, phy_cfg->regs[v]);
+
+ inno_update_bits(inno, 0xe0, RK3228_PRE_PLL_POWER_DOWN |
+ RK3228_POST_PLL_POWER_DOWN, 0);
+ inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE,
+ RK3228_BANDGAP_ENABLE);
+ inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE,
+ RK3228_TMDS_DRIVER_ENABLE);
+
+ /* Wait for post PLL lock */
+ ret = inno_poll(inno, 0xeb, v, v & RK3228_POST_PLL_LOCK_STATUS,
+ 100, 100000);
+ if (ret) {
+ dev_err(inno->dev, "Post-PLL locking failed\n");
+ return ret;
+ }
+
+ if (cfg->tmdsclock > 340000000)
+ msleep(100);
+
+ inno_update_bits(inno, 0x02, RK3228_PDATAEN_DISABLE, 0);
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3228_power_off(struct inno_hdmi_phy *inno)
+{
+ inno_update_bits(inno, 0xe1, RK3228_TMDS_DRIVER_ENABLE, 0);
+ inno_update_bits(inno, 0xe1, RK3228_BANDGAP_ENABLE, 0);
+ inno_update_bits(inno, 0xe0, RK3228_POST_PLL_POWER_DOWN,
+ RK3228_POST_PLL_POWER_DOWN);
+}
+
+static const struct inno_hdmi_phy_ops rk3228_hdmi_phy_ops = {
+ .init = inno_hdmi_phy_rk3228_init,
+ .power_on = inno_hdmi_phy_rk3228_power_on,
+ .power_off = inno_hdmi_phy_rk3228_power_off,
+};
+
+static int inno_hdmi_phy_rk3328_init(struct inno_hdmi_phy *inno)
+{
+ struct nvmem_cell *cell;
+ unsigned char *efuse_buf;
+ size_t len;
+
+ /*
+ * Use phy internal register control
+ * rxsense/poweron/pllpd/pdataen signal.
+ */
+ inno_write(inno, 0x01, RK3328_BYPASS_RXSENSE_EN |
+ RK3328_BYPASS_POWERON_EN |
+ RK3328_BYPASS_PLLPD_EN);
+ inno_write(inno, 0x02, RK3328_INT_POL_HIGH | RK3328_BYPASS_PDATA_EN |
+ RK3328_PDATA_EN);
+
+ /* Disable phy irq */
+ inno_write(inno, 0x05, 0);
+ inno_write(inno, 0x07, 0);
+
+ /* try to read the chip-version */
+ inno->chip_version = 1;
+ cell = nvmem_cell_get(inno->dev, "cpu-version");
+ if (IS_ERR(cell)) {
+ if (PTR_ERR(cell) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ return 0;
+ }
+
+ efuse_buf = nvmem_cell_read(cell, &len);
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(efuse_buf))
+ return 0;
+ if (len == 1)
+ inno->chip_version = efuse_buf[0] + 1;
+ kfree(efuse_buf);
+
+ return 0;
+}
+
+static int
+inno_hdmi_phy_rk3328_power_on(struct inno_hdmi_phy *inno,
+ const struct post_pll_config *cfg,
+ const struct phy_config *phy_cfg)
+{
+ int ret;
+ u32 v;
+
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, 0);
+ inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
+ RK3328_POST_PLL_POWER_DOWN);
+
+ inno_write(inno, 0xac, RK3328_POST_PLL_FB_DIV_7_0(cfg->fbdiv));
+ if (cfg->postdiv == 1) {
+ inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
+ RK3328_POST_PLL_PRE_DIV(cfg->prediv));
+ inno_write(inno, 0xaa, RK3328_POST_PLL_REFCLK_SEL_TMDS |
+ RK3328_POST_PLL_POWER_DOWN);
+ } else {
+ v = (cfg->postdiv / 2) - 1;
+ v &= RK3328_POST_PLL_POST_DIV_MASK;
+ inno_write(inno, 0xad, v);
+ inno_write(inno, 0xab, RK3328_POST_PLL_FB_DIV_8(cfg->fbdiv) |
+ RK3328_POST_PLL_PRE_DIV(cfg->prediv));
+ inno_write(inno, 0xaa, RK3328_POST_PLL_POST_DIV_ENABLE |
+ RK3328_POST_PLL_REFCLK_SEL_TMDS |
+ RK3328_POST_PLL_POWER_DOWN);
+ }
+
+ for (v = 0; v < 14; v++)
+ inno_write(inno, 0xb5 + v, phy_cfg->regs[v]);
+
+ /* set ESD detection threshold for TMDS CLK, D2, D1 and D0 */
+ for (v = 0; v < 4; v++)
+ inno_update_bits(inno, 0xc8 + v, RK3328_ESD_DETECT_MASK,
+ RK3328_ESD_DETECT_340MV);
+
+ if (phy_cfg->tmdsclock > 340000000) {
+ /* Set termination resistor to 100ohm */
+ v = clk_get_rate(inno->sysclk) / 100000;
+ inno_write(inno, 0xc5, RK3328_TERM_RESISTOR_CALIB_SPEED_14_8(v)
+ | RK3328_BYPASS_TERM_RESISTOR_CALIB);
+ inno_write(inno, 0xc6, RK3328_TERM_RESISTOR_CALIB_SPEED_7_0(v));
+ inno_write(inno, 0xc7, RK3328_TERM_RESISTOR_100);
+ inno_update_bits(inno, 0xc5,
+ RK3328_BYPASS_TERM_RESISTOR_CALIB, 0);
+ } else {
+ inno_write(inno, 0xc5, RK3328_BYPASS_TERM_RESISTOR_CALIB);
+
+ /* clk termination resistor is 50ohm (parallel resistors) */
+ if (phy_cfg->tmdsclock > 165000000)
+ inno_update_bits(inno, 0xc8,
+ RK3328_TMDS_TERM_RESIST_MASK,
+ RK3328_TMDS_TERM_RESIST_75 |
+ RK3328_TMDS_TERM_RESIST_150);
+
+ /* data termination resistor for D2, D1 and D0 is 150ohm */
+ for (v = 0; v < 3; v++)
+ inno_update_bits(inno, 0xc9 + v,
+ RK3328_TMDS_TERM_RESIST_MASK,
+ RK3328_TMDS_TERM_RESIST_150);
+ }
+
+ inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN, 0);
+ inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE,
+ RK3328_BANDGAP_ENABLE);
+ inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE,
+ RK3328_TMDS_DRIVER_ENABLE);
+
+ /* Wait for post PLL lock */
+ ret = inno_poll(inno, 0xaf, v, v & RK3328_POST_PLL_LOCK_STATUS,
+ 1000, 10000);
+ if (ret) {
+ dev_err(inno->dev, "Post-PLL locking failed\n");
+ return ret;
+ }
+
+ if (phy_cfg->tmdsclock > 340000000)
+ msleep(100);
+
+ inno_update_bits(inno, 0x02, RK3328_PDATA_EN, RK3328_PDATA_EN);
+
+ /* Enable PHY IRQ */
+ inno_write(inno, 0x05, RK3328_INT_TMDS_CLK(RK3328_INT_VSS_AGND_ESD_DET)
+ | RK3328_INT_TMDS_D2(RK3328_INT_VSS_AGND_ESD_DET));
+ inno_write(inno, 0x07, RK3328_INT_TMDS_D1(RK3328_INT_VSS_AGND_ESD_DET)
+ | RK3328_INT_TMDS_D0(RK3328_INT_VSS_AGND_ESD_DET));
+ return 0;
+}
+
+static void inno_hdmi_phy_rk3328_power_off(struct inno_hdmi_phy *inno)
+{
+ inno_update_bits(inno, 0xb2, RK3328_TMDS_DRIVER_ENABLE, 0);
+ inno_update_bits(inno, 0xb0, RK3328_BANDGAP_ENABLE, 0);
+ inno_update_bits(inno, 0xaa, RK3328_POST_PLL_POWER_DOWN,
+ RK3328_POST_PLL_POWER_DOWN);
+
+ /* Disable PHY IRQ */
+ inno_write(inno, 0x05, 0);
+ inno_write(inno, 0x07, 0);
+}
+
+static const struct inno_hdmi_phy_ops rk3328_hdmi_phy_ops = {
+ .init = inno_hdmi_phy_rk3328_init,
+ .power_on = inno_hdmi_phy_rk3328_power_on,
+ .power_off = inno_hdmi_phy_rk3328_power_off,
+};
+
+static const struct inno_hdmi_phy_drv_data rk3228_hdmi_phy_drv_data = {
+ .ops = &rk3228_hdmi_phy_ops,
+ .clk_ops = &inno_hdmi_phy_rk3228_clk_ops,
+ .phy_cfg_table = rk3228_phy_cfg,
+};
+
+static const struct inno_hdmi_phy_drv_data rk3328_hdmi_phy_drv_data = {
+ .ops = &rk3328_hdmi_phy_ops,
+ .clk_ops = &inno_hdmi_phy_rk3328_clk_ops,
+ .phy_cfg_table = rk3328_phy_cfg,
+};
+
+static const struct regmap_config inno_hdmi_phy_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x400,
+};
+
+static void inno_hdmi_phy_action(void *data)
+{
+ struct inno_hdmi_phy *inno = data;
+
+ clk_disable_unprepare(inno->refpclk);
+ clk_disable_unprepare(inno->sysclk);
+}
+
+static int inno_hdmi_phy_probe(struct platform_device *pdev)
+{
+ struct inno_hdmi_phy *inno;
+ struct phy_provider *phy_provider;
+ void __iomem *regs;
+ int ret;
+
+ inno = devm_kzalloc(&pdev->dev, sizeof(*inno), GFP_KERNEL);
+ if (!inno)
+ return -ENOMEM;
+
+ inno->dev = &pdev->dev;
+
+ inno->plat_data = of_device_get_match_data(inno->dev);
+ if (!inno->plat_data || !inno->plat_data->ops)
+ return -EINVAL;
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ inno->sysclk = devm_clk_get(inno->dev, "sysclk");
+ if (IS_ERR(inno->sysclk)) {
+ ret = PTR_ERR(inno->sysclk);
+ dev_err(inno->dev, "failed to get sysclk: %d\n", ret);
+ return ret;
+ }
+
+ inno->refpclk = devm_clk_get(inno->dev, "refpclk");
+ if (IS_ERR(inno->refpclk)) {
+ ret = PTR_ERR(inno->refpclk);
+ dev_err(inno->dev, "failed to get ref clock: %d\n", ret);
+ return ret;
+ }
+
+ inno->refoclk = devm_clk_get(inno->dev, "refoclk");
+ if (IS_ERR(inno->refoclk)) {
+ ret = PTR_ERR(inno->refoclk);
+ dev_err(inno->dev, "failed to get oscillator-ref clock: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(inno->sysclk);
+ if (ret) {
+ dev_err(inno->dev, "Cannot enable inno phy sysclk: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Refpclk needs to be on, on at least the rk3328 for still
+ * unknown reasons.
+ */
+ ret = clk_prepare_enable(inno->refpclk);
+ if (ret) {
+ dev_err(inno->dev, "failed to enable refpclk\n");
+ clk_disable_unprepare(inno->sysclk);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(inno->dev, inno_hdmi_phy_action,
+ inno);
+ if (ret)
+ return ret;
+
+ inno->regmap = devm_regmap_init_mmio(inno->dev, regs,
+ &inno_hdmi_phy_regmap_config);
+ if (IS_ERR(inno->regmap))
+ return PTR_ERR(inno->regmap);
+
+ /* only the newer rk3328 hdmiphy has an interrupt */
+ inno->irq = platform_get_irq(pdev, 0);
+ if (inno->irq > 0) {
+ ret = devm_request_threaded_irq(inno->dev, inno->irq,
+ inno_hdmi_phy_rk3328_hardirq,
+ inno_hdmi_phy_rk3328_irq,
+ IRQF_SHARED,
+ dev_name(inno->dev), inno);
+ if (ret)
+ return ret;
+ }
+
+ inno->phy = devm_phy_create(inno->dev, NULL, &inno_hdmi_phy_ops);
+ if (IS_ERR(inno->phy)) {
+ dev_err(inno->dev, "failed to create HDMI PHY\n");
+ return PTR_ERR(inno->phy);
+ }
+
+ phy_set_drvdata(inno->phy, inno);
+ phy_set_bus_width(inno->phy, 8);
+
+ if (inno->plat_data->ops->init) {
+ ret = inno->plat_data->ops->init(inno);
+ if (ret)
+ return ret;
+ }
+
+ ret = inno_hdmi_phy_clk_register(inno);
+ if (ret)
+ return ret;
+
+ phy_provider = devm_of_phy_provider_register(inno->dev,
+ of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int inno_hdmi_phy_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+
+ return 0;
+}
+
+static const struct of_device_id inno_hdmi_phy_of_match[] = {
+ {
+ .compatible = "rockchip,rk3228-hdmi-phy",
+ .data = &rk3228_hdmi_phy_drv_data
+ }, {
+ .compatible = "rockchip,rk3328-hdmi-phy",
+ .data = &rk3328_hdmi_phy_drv_data
+ }, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, inno_hdmi_phy_of_match);
+
+static struct platform_driver inno_hdmi_phy_driver = {
+ .probe = inno_hdmi_phy_probe,
+ .remove = inno_hdmi_phy_remove,
+ .driver = {
+ .name = "inno-hdmi-phy",
+ .of_match_table = inno_hdmi_phy_of_match,
+ },
+};
+module_platform_driver(inno_hdmi_phy_driver);
+
+MODULE_AUTHOR("Zheng Yang <zhengyang@rock-chips.com>");
+MODULE_DESCRIPTION("Innosilion HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL v2");