diff options
Diffstat (limited to 'drivers/phy/rockchip/phy-rockchip-typec.c')
| -rw-r--r-- | drivers/phy/rockchip/phy-rockchip-typec.c | 1228 |
1 files changed, 1228 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c new file mode 100644 index 000000000..39db8acde --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -0,0 +1,1228 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd + * Author: Chris Zhong <zyw@rock-chips.com> + * Kever Yang <kever.yang@rock-chips.com> + * + * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock + * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has + * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode. + * At USB3 only mode, both PLL clocks need to be initialized, this allows the + * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB + * device. + * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes + * are all used for DP. + * + * This driver gets extcon cable state and property, then decides which mode to + * select: + * + * 1. USB3 only mode: + * EXTCON_USB or EXTCON_USB_HOST state is true, and + * EXTCON_PROP_USB_SS property is true. + * EXTCON_DISP_DP state is false. + * + * 2. DP only mode: + * EXTCON_DISP_DP state is true, and + * EXTCON_PROP_USB_SS property is false. + * If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy + * is a separate phy, so this case is still DP only mode. + * + * 3. USB3+DP mode: + * EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and + * EXTCON_PROP_USB_SS property is true. + * + * This Type-C PHY driver supports normal and flip orientation. The orientation + * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip + * orientation, false is normal orientation. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/extcon.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> + +#define CMN_SSM_BANDGAP (0x21 << 2) +#define CMN_SSM_BIAS (0x22 << 2) +#define CMN_PLLSM0_PLLEN (0x29 << 2) +#define CMN_PLLSM0_PLLPRE (0x2a << 2) +#define CMN_PLLSM0_PLLVREF (0x2b << 2) +#define CMN_PLLSM0_PLLLOCK (0x2c << 2) +#define CMN_PLLSM1_PLLEN (0x31 << 2) +#define CMN_PLLSM1_PLLPRE (0x32 << 2) +#define CMN_PLLSM1_PLLVREF (0x33 << 2) +#define CMN_PLLSM1_PLLLOCK (0x34 << 2) +#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2) +#define CMN_ICAL_OVRD (0xc1 << 2) +#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2) +#define CMN_PLL0_VCOCAL_INIT (0x84 << 2) +#define CMN_PLL0_VCOCAL_ITER (0x85 << 2) +#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2) +#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2) +#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2) +#define CMN_PLL0_INTDIV (0x94 << 2) +#define CMN_PLL0_FRACDIV (0x95 << 2) +#define CMN_PLL0_HIGH_THR (0x96 << 2) +#define CMN_PLL0_DSM_DIAG (0x97 << 2) +#define CMN_PLL0_SS_CTRL1 (0x98 << 2) +#define CMN_PLL0_SS_CTRL2 (0x99 << 2) +#define CMN_PLL1_VCOCAL_START (0xa1 << 2) +#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2) +#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2) +#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2) +#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2) +#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2) +#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2) +#define CMN_PLL1_INTDIV (0xb4 << 2) +#define CMN_PLL1_FRACDIV (0xb5 << 2) +#define CMN_PLL1_HIGH_THR (0xb6 << 2) +#define CMN_PLL1_DSM_DIAG (0xb7 << 2) +#define CMN_PLL1_SS_CTRL1 (0xb8 << 2) +#define CMN_PLL1_SS_CTRL2 (0xb9 << 2) +#define CMN_RXCAL_OVRD (0xd1 << 2) + +#define CMN_TXPUCAL_CTRL (0xe0 << 2) +#define CMN_TXPUCAL_OVRD (0xe1 << 2) +#define CMN_TXPDCAL_CTRL (0xf0 << 2) +#define CMN_TXPDCAL_OVRD (0xf1 << 2) + +/* For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL */ +#define CMN_TXPXCAL_START BIT(15) +#define CMN_TXPXCAL_DONE BIT(14) +#define CMN_TXPXCAL_NO_RESPONSE BIT(13) +#define CMN_TXPXCAL_CURRENT_RESPONSE BIT(12) + +#define CMN_TXPU_ADJ_CTRL (0x108 << 2) +#define CMN_TXPD_ADJ_CTRL (0x10c << 2) + +/* + * For CMN_TXPUCAL_CTRL, CMN_TXPDCAL_CTRL, + * CMN_TXPU_ADJ_CTRL, CMN_TXPDCAL_CTRL + * + * NOTE: some of these registers are documented to be 2's complement + * signed numbers, but then documented to be always positive. Weird. + * In such a case, using CMN_CALIB_CODE_POS() avoids the unnecessary + * sign extension. + */ +#define CMN_CALIB_CODE_WIDTH 7 +#define CMN_CALIB_CODE_OFFSET 0 +#define CMN_CALIB_CODE_MASK GENMASK(CMN_CALIB_CODE_WIDTH, 0) +#define CMN_CALIB_CODE(x) \ + sign_extend32((x) >> CMN_CALIB_CODE_OFFSET, CMN_CALIB_CODE_WIDTH) + +#define CMN_CALIB_CODE_POS_MASK GENMASK(CMN_CALIB_CODE_WIDTH - 1, 0) +#define CMN_CALIB_CODE_POS(x) \ + (((x) >> CMN_CALIB_CODE_OFFSET) & CMN_CALIB_CODE_POS_MASK) + +#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2) +#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2) +#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2) +#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2) +#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2) +#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2) +#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2) +#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2) +#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2) +#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2) +#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2) +#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2) +#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2) +#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2) + +#define XCVR_PSM_RCTRL(n) ((0x4001 | ((n) << 9)) << 2) +#define XCVR_PSM_CAL_TMR(n) ((0x4002 | ((n) << 9)) << 2) +#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | ((n) << 9)) << 2) +#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | ((n) << 9)) << 2) +#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | ((n) << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_000(n) ((0x4058 | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_001(n) ((0x4059 | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_010(n) ((0x405a | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_011(n) ((0x405b | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_100(n) ((0x405c | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_101(n) ((0x405d | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_110(n) ((0x405e | ((n) << 9)) << 2) +#define TX_TXCC_MGNLS_MULT_111(n) ((0x405f | ((n) << 9)) << 2) + +#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | ((n) << 9)) << 2) +#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | ((n) << 9)) << 2) +#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | ((n) << 9)) << 2) +#define TX_PSC_A0(n) ((0x4100 | ((n) << 9)) << 2) +#define TX_PSC_A1(n) ((0x4101 | ((n) << 9)) << 2) +#define TX_PSC_A2(n) ((0x4102 | ((n) << 9)) << 2) +#define TX_PSC_A3(n) ((0x4103 | ((n) << 9)) << 2) +#define TX_RCVDET_CTRL(n) ((0x4120 | ((n) << 9)) << 2) +#define TX_RCVDET_EN_TMR(n) ((0x4122 | ((n) << 9)) << 2) +#define TX_RCVDET_ST_TMR(n) ((0x4123 | ((n) << 9)) << 2) +#define TX_DIAG_TX_DRV(n) ((0x41e1 | ((n) << 9)) << 2) +#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2) + +/* Use this for "n" in macros like "_MULT_XXX" to target the aux channel */ +#define AUX_CH_LANE 8 + +#define TX_ANA_CTRL_REG_1 (0x5020 << 2) + +#define TXDA_DP_AUX_EN BIT(15) +#define AUXDA_SE_EN BIT(14) +#define TXDA_CAL_LATCH_EN BIT(13) +#define AUXDA_POLARITY BIT(12) +#define TXDA_DRV_POWER_ISOLATION_EN BIT(11) +#define TXDA_DRV_POWER_EN_PH_2_N BIT(10) +#define TXDA_DRV_POWER_EN_PH_1_N BIT(9) +#define TXDA_BGREF_EN BIT(8) +#define TXDA_DRV_LDO_EN BIT(7) +#define TXDA_DECAP_EN_DEL BIT(6) +#define TXDA_DECAP_EN BIT(5) +#define TXDA_UPHY_SUPPLY_EN_DEL BIT(4) +#define TXDA_UPHY_SUPPLY_EN BIT(3) +#define TXDA_LOW_LEAKAGE_EN BIT(2) +#define TXDA_DRV_IDLE_LOWI_EN BIT(1) +#define TXDA_DRV_CMN_MODE_EN BIT(0) + +#define TX_ANA_CTRL_REG_2 (0x5021 << 2) + +#define AUXDA_DEBOUNCING_CLK BIT(15) +#define TXDA_LPBK_RECOVERED_CLK_EN BIT(14) +#define TXDA_LPBK_ISI_GEN_EN BIT(13) +#define TXDA_LPBK_SERIAL_EN BIT(12) +#define TXDA_LPBK_LINE_EN BIT(11) +#define TXDA_DRV_LDO_REDC_SINKIQ BIT(10) +#define XCVR_DECAP_EN_DEL BIT(9) +#define XCVR_DECAP_EN BIT(8) +#define TXDA_MPHY_ENABLE_HS_NT BIT(7) +#define TXDA_MPHY_SA_MODE BIT(6) +#define TXDA_DRV_LDO_RBYR_FB_EN BIT(5) +#define TXDA_DRV_RST_PULL_DOWN BIT(4) +#define TXDA_DRV_LDO_BG_FB_EN BIT(3) +#define TXDA_DRV_LDO_BG_REF_EN BIT(2) +#define TXDA_DRV_PREDRV_EN_DEL BIT(1) +#define TXDA_DRV_PREDRV_EN BIT(0) + +#define TXDA_COEFF_CALC_CTRL (0x5022 << 2) + +#define TX_HIGH_Z BIT(6) +#define TX_VMARGIN_OFFSET 3 +#define TX_VMARGIN_MASK 0x7 +#define LOW_POWER_SWING_EN BIT(2) +#define TX_FCM_DRV_MAIN_EN BIT(1) +#define TX_FCM_FULL_MARGIN BIT(0) + +#define TX_DIG_CTRL_REG_2 (0x5024 << 2) + +#define TX_HIGH_Z_TM_EN BIT(15) +#define TX_RESCAL_CODE_OFFSET 0 +#define TX_RESCAL_CODE_MASK 0x3f + +#define TXDA_CYA_AUXDA_CYA (0x5025 << 2) +#define TX_ANA_CTRL_REG_3 (0x5026 << 2) +#define TX_ANA_CTRL_REG_4 (0x5027 << 2) +#define TX_ANA_CTRL_REG_5 (0x5029 << 2) + +#define RX_PSC_A0(n) ((0x8000 | ((n) << 9)) << 2) +#define RX_PSC_A1(n) ((0x8001 | ((n) << 9)) << 2) +#define RX_PSC_A2(n) ((0x8002 | ((n) << 9)) << 2) +#define RX_PSC_A3(n) ((0x8003 | ((n) << 9)) << 2) +#define RX_PSC_CAL(n) ((0x8006 | ((n) << 9)) << 2) +#define RX_PSC_RDY(n) ((0x8007 | ((n) << 9)) << 2) +#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2) +#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2) +#define RX_SDCAL0_OVRD (0x8041 << 2) +#define RX_SDCAL1_OVRD (0x8049 << 2) +#define RX_SLC_INIT (0x806d << 2) +#define RX_SLC_RUN (0x806e << 2) +#define RX_CDRLF_CNFG2 (0x8081 << 2) +#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | ((n) << 9)) << 2) +#define RX_SLC_IOP0_OVRD (0x8101 << 2) +#define RX_SLC_IOP1_OVRD (0x8105 << 2) +#define RX_SLC_QOP0_OVRD (0x8109 << 2) +#define RX_SLC_QOP1_OVRD (0x810d << 2) +#define RX_SLC_EOP0_OVRD (0x8111 << 2) +#define RX_SLC_EOP1_OVRD (0x8115 << 2) +#define RX_SLC_ION0_OVRD (0x8119 << 2) +#define RX_SLC_ION1_OVRD (0x811d << 2) +#define RX_SLC_QON0_OVRD (0x8121 << 2) +#define RX_SLC_QON1_OVRD (0x8125 << 2) +#define RX_SLC_EON0_OVRD (0x8129 << 2) +#define RX_SLC_EON1_OVRD (0x812d << 2) +#define RX_SLC_IEP0_OVRD (0x8131 << 2) +#define RX_SLC_IEP1_OVRD (0x8135 << 2) +#define RX_SLC_QEP0_OVRD (0x8139 << 2) +#define RX_SLC_QEP1_OVRD (0x813d << 2) +#define RX_SLC_EEP0_OVRD (0x8141 << 2) +#define RX_SLC_EEP1_OVRD (0x8145 << 2) +#define RX_SLC_IEN0_OVRD (0x8149 << 2) +#define RX_SLC_IEN1_OVRD (0x814d << 2) +#define RX_SLC_QEN0_OVRD (0x8151 << 2) +#define RX_SLC_QEN1_OVRD (0x8155 << 2) +#define RX_SLC_EEN0_OVRD (0x8159 << 2) +#define RX_SLC_EEN1_OVRD (0x815d << 2) +#define RX_REE_CTRL_DATA_MASK(n) ((0x81bb | ((n) << 9)) << 2) +#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | ((n) << 9)) << 2) +#define RX_DIAG_SC2C_DELAY (0x81e1 << 2) + +#define PMA_LANE_CFG (0xc000 << 2) +#define PIPE_CMN_CTRL1 (0xc001 << 2) +#define PIPE_CMN_CTRL2 (0xc002 << 2) +#define PIPE_COM_LOCK_CFG1 (0xc003 << 2) +#define PIPE_COM_LOCK_CFG2 (0xc004 << 2) +#define PIPE_RCV_DET_INH (0xc005 << 2) +#define DP_MODE_CTL (0xc008 << 2) +#define DP_CLK_CTL (0xc009 << 2) +#define STS (0xc00F << 2) +#define PHY_ISO_CMN_CTRL (0xc010 << 2) +#define PHY_DP_TX_CTL (0xc408 << 2) +#define PMA_CMN_CTRL1 (0xc800 << 2) +#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2) +#define PHY_ISOLATION_CTRL (0xc81f << 2) +#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | ((n) << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | ((n) << 6)) << 2) +#define TX_BIST_CTRL(n) ((0x4140 | ((n) << 9)) << 2) +#define TX_BIST_UDDWR(n) ((0x4141 | ((n) << 9)) << 2) + +/* + * Selects which PLL clock will be driven on the analog high speed + * clock 0: PLL 0 div 1 + * clock 1: PLL 1 div 2 + */ +#define CLK_PLL_CONFIG 0X30 +#define CLK_PLL_MASK 0x33 + +#define CMN_READY BIT(0) + +#define DP_PLL_CLOCK_ENABLE BIT(2) +#define DP_PLL_ENABLE BIT(0) +#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8)) + +#define DP_MODE_A0 BIT(4) +#define DP_MODE_A2 BIT(6) +#define DP_MODE_ENTER_A0 0xc101 +#define DP_MODE_ENTER_A2 0xc104 + +#define PHY_MODE_SET_TIMEOUT 100000 + +#define PIN_ASSIGN_C_E 0x51d9 +#define PIN_ASSIGN_D_F 0x5100 + +#define MODE_DISCONNECT 0 +#define MODE_UFP_USB BIT(0) +#define MODE_DFP_USB BIT(1) +#define MODE_DFP_DP BIT(2) + +struct usb3phy_reg { + u32 offset; + u32 enable_bit; + u32 write_enable; +}; + +/** + * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration. + * @reg: the base address for usb3-phy config. + * @typec_conn_dir: the register of type-c connector direction. + * @usb3tousb2_en: the register of type-c force usb2 to usb2 enable. + * @external_psm: the register of type-c phy external psm clock. + * @pipe_status: the register of type-c phy pipe status. + * @usb3_host_disable: the register of type-c usb3 host disable. + * @usb3_host_port: the register of type-c usb3 host port. + * @uphy_dp_sel: the register of type-c phy DP select control. + */ +struct rockchip_usb3phy_port_cfg { + unsigned int reg; + struct usb3phy_reg typec_conn_dir; + struct usb3phy_reg usb3tousb2_en; + struct usb3phy_reg external_psm; + struct usb3phy_reg pipe_status; + struct usb3phy_reg usb3_host_disable; + struct usb3phy_reg usb3_host_port; + struct usb3phy_reg uphy_dp_sel; +}; + +struct rockchip_typec_phy { + struct device *dev; + void __iomem *base; + struct extcon_dev *extcon; + struct regmap *grf_regs; + struct clk *clk_core; + struct clk *clk_ref; + struct reset_control *uphy_rst; + struct reset_control *pipe_rst; + struct reset_control *tcphy_rst; + const struct rockchip_usb3phy_port_cfg *port_cfgs; + /* mutex to protect access to individual PHYs */ + struct mutex lock; + + bool flip; + u8 mode; +}; + +struct phy_reg { + u16 value; + u32 addr; +}; + +static struct phy_reg usb3_pll_cfg[] = { + { 0xf0, CMN_PLL0_VCOCAL_INIT }, + { 0x18, CMN_PLL0_VCOCAL_ITER }, + { 0xd0, CMN_PLL0_INTDIV }, + { 0x4a4a, CMN_PLL0_FRACDIV }, + { 0x34, CMN_PLL0_HIGH_THR }, + { 0x1ee, CMN_PLL0_SS_CTRL1 }, + { 0x7f03, CMN_PLL0_SS_CTRL2 }, + { 0x20, CMN_PLL0_DSM_DIAG }, + { 0, CMN_DIAG_PLL0_OVRD }, + { 0, CMN_DIAG_PLL0_FBH_OVRD }, + { 0, CMN_DIAG_PLL0_FBL_OVRD }, + { 0x7, CMN_DIAG_PLL0_V2I_TUNE }, + { 0x45, CMN_DIAG_PLL0_CP_TUNE }, + { 0x8, CMN_DIAG_PLL0_LF_PROG }, +}; + +static struct phy_reg dp_pll_cfg[] = { + { 0xf0, CMN_PLL1_VCOCAL_INIT }, + { 0x18, CMN_PLL1_VCOCAL_ITER }, + { 0x30b9, CMN_PLL1_VCOCAL_START }, + { 0x21c, CMN_PLL1_INTDIV }, + { 0, CMN_PLL1_FRACDIV }, + { 0x5, CMN_PLL1_HIGH_THR }, + { 0x35, CMN_PLL1_SS_CTRL1 }, + { 0x7f1e, CMN_PLL1_SS_CTRL2 }, + { 0x20, CMN_PLL1_DSM_DIAG }, + { 0, CMN_PLLSM1_USER_DEF_CTRL }, + { 0, CMN_DIAG_PLL1_OVRD }, + { 0, CMN_DIAG_PLL1_FBH_OVRD }, + { 0, CMN_DIAG_PLL1_FBL_OVRD }, + { 0x6, CMN_DIAG_PLL1_V2I_TUNE }, + { 0x45, CMN_DIAG_PLL1_CP_TUNE }, + { 0x8, CMN_DIAG_PLL1_LF_PROG }, + { 0x100, CMN_DIAG_PLL1_PTATIS_TUNE1 }, + { 0x7, CMN_DIAG_PLL1_PTATIS_TUNE2 }, + { 0x4, CMN_DIAG_PLL1_INCLK_CTRL }, +}; + +static const struct rockchip_usb3phy_port_cfg rk3399_usb3phy_port_cfgs[] = { + { + .reg = 0xff7c0000, + .typec_conn_dir = { 0xe580, 0, 16 }, + .usb3tousb2_en = { 0xe580, 3, 19 }, + .external_psm = { 0xe588, 14, 30 }, + .pipe_status = { 0xe5c0, 0, 0 }, + .usb3_host_disable = { 0x2434, 0, 16 }, + .usb3_host_port = { 0x2434, 12, 28 }, + .uphy_dp_sel = { 0x6268, 19, 19 }, + }, + { + .reg = 0xff800000, + .typec_conn_dir = { 0xe58c, 0, 16 }, + .usb3tousb2_en = { 0xe58c, 3, 19 }, + .external_psm = { 0xe594, 14, 30 }, + .pipe_status = { 0xe5c0, 16, 16 }, + .usb3_host_disable = { 0x2444, 0, 16 }, + .usb3_host_port = { 0x2444, 12, 28 }, + .uphy_dp_sel = { 0x6268, 3, 19 }, + }, + { /* sentinel */ } +}; + +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy) +{ + u32 i, rdata; + + /* + * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent + * cmn_psm_clk_dig_div = 2, set the clk division to 2 + */ + writel(0x830, tcphy->base + PMA_CMN_CTRL1); + for (i = 0; i < 4; i++) { + /* + * The following PHY configuration assumes a 24 MHz reference + * clock. + */ + writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i)); + writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i)); + writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i)); + } + + rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL); + rdata &= ~CLK_PLL_MASK; + rdata |= CLK_PLL_CONFIG; + writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL); +} + +static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy) +{ + u32 i; + + /* load the configuration of PLL0 */ + for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++) + writel(usb3_pll_cfg[i].value, + tcphy->base + usb3_pll_cfg[i].addr); +} + +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy) +{ + u32 i; + + /* set the default mode to RBR */ + writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR, + tcphy->base + DP_CLK_CTL); + + /* load the configuration of PLL1 */ + for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++) + writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr); +} + +static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + writel(0x7799, tcphy->base + TX_PSC_A0(lane)); + writel(0x7798, tcphy->base + TX_PSC_A1(lane)); + writel(0x5098, tcphy->base + TX_PSC_A2(lane)); + writel(0x5098, tcphy->base + TX_PSC_A3(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + writel(0xa6fd, tcphy->base + RX_PSC_A0(lane)); + writel(0xa6fd, tcphy->base + RX_PSC_A1(lane)); + writel(0xa410, tcphy->base + RX_PSC_A2(lane)); + writel(0x2410, tcphy->base + RX_PSC_A3(lane)); + writel(0x23ff, tcphy->base + RX_PSC_CAL(lane)); + writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane)); + writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane)); + writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane)); + writel(0x2010, tcphy->base + RX_PSC_RDY(lane)); + writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane) +{ + u16 rdata; + + writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane)); + writel(0x6799, tcphy->base + TX_PSC_A0(lane)); + writel(0x6798, tcphy->base + TX_PSC_A1(lane)); + writel(0x98, tcphy->base + TX_PSC_A2(lane)); + writel(0x98, tcphy->base + TX_PSC_A3(lane)); + + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane)); + + writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane)); + writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane)); + + rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); + rdata = (rdata & 0x8fff) | 0x6000; + writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); +} + +static inline int property_enable(struct rockchip_typec_phy *tcphy, + const struct usb3phy_reg *reg, bool en) +{ + u32 mask = 1 << reg->write_enable; + u32 val = en << reg->enable_bit; + + return regmap_write(tcphy->grf_regs, reg->offset, val | mask); +} + +static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy) +{ + u16 tx_ana_ctrl_reg_1; + + /* + * Select the polarity of the xcvr: + * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down + * aux_p) + */ + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + if (!tcphy->flip) + tx_ana_ctrl_reg_1 |= AUXDA_POLARITY; + else + tx_ana_ctrl_reg_1 &= ~AUXDA_POLARITY; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); +} + +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) +{ + u16 val; + u16 tx_ana_ctrl_reg_1; + u16 tx_ana_ctrl_reg_2; + s32 pu_calib_code, pd_calib_code; + s32 pu_adj, pd_adj; + u16 calib; + + /* + * Calculate calibration code as per docs: use an average of the + * pull down and pull up. Then add in adjustments. + */ + val = readl(tcphy->base + CMN_TXPUCAL_CTRL); + pu_calib_code = CMN_CALIB_CODE_POS(val); + val = readl(tcphy->base + CMN_TXPDCAL_CTRL); + pd_calib_code = CMN_CALIB_CODE_POS(val); + val = readl(tcphy->base + CMN_TXPU_ADJ_CTRL); + pu_adj = CMN_CALIB_CODE(val); + val = readl(tcphy->base + CMN_TXPD_ADJ_CTRL); + pd_adj = CMN_CALIB_CODE(val); + calib = (pu_calib_code + pd_calib_code) / 2 + pu_adj + pd_adj; + + /* disable txda_cal_latch_en for rewrite the calibration values */ + tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1); + tx_ana_ctrl_reg_1 &= ~TXDA_CAL_LATCH_EN; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + + /* write the calibration, then delay 10 ms as sample in docs */ + val = readl(tcphy->base + TX_DIG_CTRL_REG_2); + val &= ~(TX_RESCAL_CODE_MASK << TX_RESCAL_CODE_OFFSET); + val |= calib << TX_RESCAL_CODE_OFFSET; + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); + usleep_range(10000, 10050); + + /* + * Enable signal for latch that sample and holds calibration values. + * Activate this signal for 1 clock cycle to sample new calibration + * values. + */ + tx_ana_ctrl_reg_1 |= TXDA_CAL_LATCH_EN; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + usleep_range(150, 200); + + /* set TX Voltage Level and TX Deemphasis to 0 */ + writel(0, tcphy->base + PHY_DP_TX_CTL); + + /* re-enable decap */ + tx_ana_ctrl_reg_2 = XCVR_DECAP_EN; + writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2); + udelay(1); + tx_ana_ctrl_reg_2 |= XCVR_DECAP_EN_DEL; + writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_3); + + tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + udelay(1); + tx_ana_ctrl_reg_1 |= TXDA_UPHY_SUPPLY_EN_DEL; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Programs txda_drv_ldo_prog[15:0], Sets driver LDO + * voltage 16'h1001 for DP-AUX-TX and RX + */ + writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); + + /* re-enables Bandgap reference for LDO */ + tx_ana_ctrl_reg_1 |= TXDA_DRV_LDO_EN; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + udelay(5); + tx_ana_ctrl_reg_1 |= TXDA_BGREF_EN; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * re-enables the transmitter pre-driver, driver data selection MUX, + * and receiver detect circuits. + */ + tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN; + writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2); + udelay(1); + tx_ana_ctrl_reg_2 |= TXDA_DRV_PREDRV_EN_DEL; + writel(tx_ana_ctrl_reg_2, tcphy->base + TX_ANA_CTRL_REG_2); + + /* + * Do all the undocumented magic: + * - Turn on TXDA_DP_AUX_EN, whatever that is, even though sample + * never shows this going on. + * - Turn on TXDA_DECAP_EN (and TXDA_DECAP_EN_DEL) even though + * docs say for aux it's always 0. + * - Turn off the LDO and BGREF, which we just spent time turning + * on above (???). + * + * Without this magic, things seem worse. + */ + tx_ana_ctrl_reg_1 |= TXDA_DP_AUX_EN; + tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN; + tx_ana_ctrl_reg_1 &= ~TXDA_DRV_LDO_EN; + tx_ana_ctrl_reg_1 &= ~TXDA_BGREF_EN; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + udelay(1); + tx_ana_ctrl_reg_1 |= TXDA_DECAP_EN_DEL; + writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * Undo the work we did to set the LDO voltage. + * This doesn't seem to help nor hurt, but it kinda goes with the + * undocumented magic above. + */ + writel(0, tcphy->base + TX_ANA_CTRL_REG_4); + + /* Don't set voltage swing to 400 mV peak to peak (differential) */ + writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL); + + /* Init TXDA_CYA_AUXDA_CYA for unknown magic reasons */ + writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); + + /* + * More undocumented magic, presumably the goal of which is to + * make the "auxda_source_aux_oen" be ignored and instead to decide + * about "high impedance state" based on what software puts in the + * register TXDA_COEFF_CALC_CTRL (see TX_HIGH_Z). Since we only + * program that register once and we don't set the bit TX_HIGH_Z, + * presumably the goal here is that we should never put the analog + * driver in high impedance state. + */ + val = readl(tcphy->base + TX_DIG_CTRL_REG_2); + val |= TX_HIGH_Z_TM_EN; + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); +} + +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + int ret, i; + u32 val; + + ret = clk_prepare_enable(tcphy->clk_core); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable core clock\n"); + return ret; + } + + ret = clk_prepare_enable(tcphy->clk_ref); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n"); + goto err_clk_core; + } + + reset_control_deassert(tcphy->tcphy_rst); + + property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + tcphy_dp_aux_set_flip(tcphy); + + tcphy_cfg_24m(tcphy); + + if (mode == MODE_DFP_DP) { + tcphy_cfg_dp_pll(tcphy); + for (i = 0; i < 4; i++) + tcphy_dp_cfg_lane(tcphy, i); + + writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG); + } else { + tcphy_cfg_usb3_pll(tcphy); + tcphy_cfg_dp_pll(tcphy); + if (tcphy->flip) { + tcphy_tx_usb3_cfg_lane(tcphy, 3); + tcphy_rx_usb3_cfg_lane(tcphy, 2); + tcphy_dp_cfg_lane(tcphy, 0); + tcphy_dp_cfg_lane(tcphy, 1); + } else { + tcphy_tx_usb3_cfg_lane(tcphy, 0); + tcphy_rx_usb3_cfg_lane(tcphy, 1); + tcphy_dp_cfg_lane(tcphy, 2); + tcphy_dp_cfg_lane(tcphy, 3); + } + + writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG); + } + + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + + reset_control_deassert(tcphy->uphy_rst); + + ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1, + val, val & CMN_READY, 10, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "wait pma ready timeout\n"); + ret = -ETIMEDOUT; + goto err_wait_pma; + } + + reset_control_deassert(tcphy->pipe_rst); + + return 0; + +err_wait_pma: + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->tcphy_rst); + clk_disable_unprepare(tcphy->clk_ref); +err_clk_core: + clk_disable_unprepare(tcphy->clk_core); + return ret; +} + +static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy) +{ + reset_control_assert(tcphy->tcphy_rst); + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->pipe_rst); + clk_disable_unprepare(tcphy->clk_core); + clk_disable_unprepare(tcphy->clk_ref); +} + +static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) +{ + struct extcon_dev *edev = tcphy->extcon; + union extcon_property_value property; + unsigned int id; + u8 mode; + int ret, ufp, dp; + + if (!edev) + return MODE_DFP_USB; + + ufp = extcon_get_state(edev, EXTCON_USB); + dp = extcon_get_state(edev, EXTCON_DISP_DP); + + mode = MODE_DFP_USB; + id = EXTCON_USB_HOST; + + if (ufp > 0) { + mode = MODE_UFP_USB; + id = EXTCON_USB; + } else if (dp > 0) { + mode = MODE_DFP_DP; + id = EXTCON_DISP_DP; + + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS, + &property); + if (ret) { + dev_err(tcphy->dev, "get superspeed property failed\n"); + return ret; + } + + if (property.intval) + mode |= MODE_DFP_USB; + } + + ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY, + &property); + if (ret) { + dev_err(tcphy->dev, "get polarity property failed\n"); + return ret; + } + + tcphy->flip = property.intval ? 1 : 0; + + return mode; +} + +static int tcphy_cfg_usb3_to_usb2_only(struct rockchip_typec_phy *tcphy, + bool value) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + + property_enable(tcphy, &cfg->usb3tousb2_en, value); + property_enable(tcphy, &cfg->usb3_host_disable, value); + property_enable(tcphy, &cfg->usb3_host_port, !value); + + return 0; +} + +static int rockchip_usb3_phy_power_on(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + const struct usb3phy_reg *reg = &cfg->pipe_status; + int timeout, new_mode, ret = 0; + u32 val; + + mutex_lock(&tcphy->lock); + + new_mode = tcphy_get_mode(tcphy); + if (new_mode < 0) { + ret = new_mode; + goto unlock_ret; + } + + /* DP-only mode; fall back to USB2 */ + if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB))) { + tcphy_cfg_usb3_to_usb2_only(tcphy, true); + goto unlock_ret; + } + + if (tcphy->mode == new_mode) + goto unlock_ret; + + if (tcphy->mode == MODE_DISCONNECT) { + ret = tcphy_phy_init(tcphy, new_mode); + if (ret) + goto unlock_ret; + } + + /* wait TCPHY for pipe ready */ + for (timeout = 0; timeout < 100; timeout++) { + regmap_read(tcphy->grf_regs, reg->offset, &val); + if (!(val & BIT(reg->enable_bit))) { + tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB); + + /* enable usb3 host */ + tcphy_cfg_usb3_to_usb2_only(tcphy, false); + goto unlock_ret; + } + usleep_range(10, 20); + } + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + + ret = -ETIMEDOUT; + +unlock_ret: + mutex_unlock(&tcphy->lock); + return ret; +} + +static int rockchip_usb3_phy_power_off(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + + mutex_lock(&tcphy->lock); + tcphy_cfg_usb3_to_usb2_only(tcphy, false); + + if (tcphy->mode == MODE_DISCONNECT) + goto unlock; + + tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB); + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + +unlock: + mutex_unlock(&tcphy->lock); + return 0; +} + +static const struct phy_ops rockchip_usb3_phy_ops = { + .power_on = rockchip_usb3_phy_power_on, + .power_off = rockchip_usb3_phy_power_off, + .owner = THIS_MODULE, +}; + +static int rockchip_dp_phy_power_on(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + int new_mode, ret = 0; + u32 val; + + mutex_lock(&tcphy->lock); + + new_mode = tcphy_get_mode(tcphy); + if (new_mode < 0) { + ret = new_mode; + goto unlock_ret; + } + + if (!(new_mode & MODE_DFP_DP)) { + ret = -ENODEV; + goto unlock_ret; + } + + if (tcphy->mode == new_mode) + goto unlock_ret; + + /* + * If the PHY has been power on, but the mode is not DP only mode, + * re-init the PHY for setting all of 4 lanes to DP. + */ + if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) { + tcphy_phy_deinit(tcphy); + ret = tcphy_phy_init(tcphy, new_mode); + } else if (tcphy->mode == MODE_DISCONNECT) { + ret = tcphy_phy_init(tcphy, new_mode); + } + if (ret) + goto unlock_ret; + + property_enable(tcphy, &cfg->uphy_dp_sel, 1); + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & DP_MODE_A2, 1000, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n"); + goto power_on_finish; + } + + tcphy_dp_aux_calibration(tcphy); + + writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL); + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & DP_MODE_A0, 1000, + PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n"); + goto power_on_finish; + } + + tcphy->mode |= MODE_DFP_DP; + +power_on_finish: + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); +unlock_ret: + mutex_unlock(&tcphy->lock); + return ret; +} + +static int rockchip_dp_phy_power_off(struct phy *phy) +{ + struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy); + + mutex_lock(&tcphy->lock); + + if (tcphy->mode == MODE_DISCONNECT) + goto unlock; + + tcphy->mode &= ~MODE_DFP_DP; + + writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL); + + if (tcphy->mode == MODE_DISCONNECT) + tcphy_phy_deinit(tcphy); + +unlock: + mutex_unlock(&tcphy->lock); + return 0; +} + +static const struct phy_ops rockchip_dp_phy_ops = { + .power_on = rockchip_dp_phy_power_on, + .power_off = rockchip_dp_phy_power_off, + .owner = THIS_MODULE, +}; + +static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy, + struct device *dev) +{ + tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,grf"); + if (IS_ERR(tcphy->grf_regs)) { + dev_err(dev, "could not find grf dt node\n"); + return PTR_ERR(tcphy->grf_regs); + } + + tcphy->clk_core = devm_clk_get(dev, "tcpdcore"); + if (IS_ERR(tcphy->clk_core)) { + dev_err(dev, "could not get uphy core clock\n"); + return PTR_ERR(tcphy->clk_core); + } + + tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref"); + if (IS_ERR(tcphy->clk_ref)) { + dev_err(dev, "could not get uphy ref clock\n"); + return PTR_ERR(tcphy->clk_ref); + } + + tcphy->uphy_rst = devm_reset_control_get(dev, "uphy"); + if (IS_ERR(tcphy->uphy_rst)) { + dev_err(dev, "no uphy_rst reset control found\n"); + return PTR_ERR(tcphy->uphy_rst); + } + + tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe"); + if (IS_ERR(tcphy->pipe_rst)) { + dev_err(dev, "no pipe_rst reset control found\n"); + return PTR_ERR(tcphy->pipe_rst); + } + + tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy"); + if (IS_ERR(tcphy->tcphy_rst)) { + dev_err(dev, "no tcphy_rst reset control found\n"); + return PTR_ERR(tcphy->tcphy_rst); + } + + return 0; +} + +static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + + reset_control_assert(tcphy->tcphy_rst); + reset_control_assert(tcphy->uphy_rst); + reset_control_assert(tcphy->pipe_rst); + + /* select external psm clock */ + property_enable(tcphy, &cfg->external_psm, 1); + property_enable(tcphy, &cfg->usb3tousb2_en, 0); + + tcphy->mode = MODE_DISCONNECT; +} + +static int rockchip_typec_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct rockchip_typec_phy *tcphy; + struct phy_provider *phy_provider; + struct resource *res; + const struct rockchip_usb3phy_port_cfg *phy_cfgs; + int index, ret; + + tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL); + if (!tcphy) + return -ENOMEM; + + phy_cfgs = of_device_get_match_data(dev); + if (!phy_cfgs) { + dev_err(dev, "phy configs are not assigned!\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tcphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(tcphy->base)) + return PTR_ERR(tcphy->base); + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == res->start) { + tcphy->port_cfgs = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!tcphy->port_cfgs) { + dev_err(dev, "no phy-config can be matched with %pOFn node\n", + np); + return -EINVAL; + } + + ret = tcphy_parse_dt(tcphy, dev); + if (ret) + return ret; + + tcphy->dev = dev; + platform_set_drvdata(pdev, tcphy); + mutex_init(&tcphy->lock); + + typec_phy_pre_init(tcphy); + + tcphy->extcon = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(tcphy->extcon)) { + if (PTR_ERR(tcphy->extcon) == -ENODEV) { + tcphy->extcon = NULL; + } else { + if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER) + dev_err(dev, "Invalid or missing extcon\n"); + return PTR_ERR(tcphy->extcon); + } + } + + pm_runtime_enable(dev); + + for_each_available_child_of_node(np, child_np) { + struct phy *phy; + + if (of_node_name_eq(child_np, "dp-port")) + phy = devm_phy_create(dev, child_np, + &rockchip_dp_phy_ops); + else if (of_node_name_eq(child_np, "usb3-port")) + phy = devm_phy_create(dev, child_np, + &rockchip_usb3_phy_ops); + else + continue; + + if (IS_ERR(phy)) { + dev_err(dev, "failed to create phy: %pOFn\n", + child_np); + pm_runtime_disable(dev); + of_node_put(child_np); + return PTR_ERR(phy); + } + + phy_set_drvdata(phy, tcphy); + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + dev_err(dev, "Failed to register phy provider\n"); + pm_runtime_disable(dev); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static int rockchip_typec_phy_remove(struct platform_device *pdev) +{ + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id rockchip_typec_phy_dt_ids[] = { + { + .compatible = "rockchip,rk3399-typec-phy", + .data = &rk3399_usb3phy_port_cfgs + }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids); + +static struct platform_driver rockchip_typec_phy_driver = { + .probe = rockchip_typec_phy_probe, + .remove = rockchip_typec_phy_remove, + .driver = { + .name = "rockchip-typec-phy", + .of_match_table = rockchip_typec_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_typec_phy_driver); + +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); +MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>"); +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver"); +MODULE_LICENSE("GPL v2"); |