summaryrefslogtreecommitdiffstats
path: root/drivers/phy/samsung
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/samsung')
-rw-r--r--drivers/phy/samsung/Kconfig105
-rw-r--r--drivers/phy/samsung/Makefile17
-rw-r--r--drivers/phy/samsung/phy-exynos-dp-video.c119
-rw-r--r--drivers/phy/samsung/phy-exynos-mipi-video.c369
-rw-r--r--drivers/phy/samsung/phy-exynos-pcie.c192
-rw-r--r--drivers/phy/samsung/phy-exynos4210-usb2.c257
-rw-r--r--drivers/phy/samsung/phy-exynos4x12-usb2.c375
-rw-r--r--drivers/phy/samsung/phy-exynos5-usbdrd.c949
-rw-r--r--drivers/phy/samsung/phy-exynos5250-sata.c254
-rw-r--r--drivers/phy/samsung/phy-exynos5250-usb2.c418
-rw-r--r--drivers/phy/samsung/phy-exynos7-ufs.c85
-rw-r--r--drivers/phy/samsung/phy-exynosautov9-ufs.c74
-rw-r--r--drivers/phy/samsung/phy-fsd-ufs.c63
-rw-r--r--drivers/phy/samsung/phy-s5pv210-usb2.c188
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.c329
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.h146
-rw-r--r--drivers/phy/samsung/phy-samsung-usb2.c263
-rw-r--r--drivers/phy/samsung/phy-samsung-usb2.h71
18 files changed, 4274 insertions, 0 deletions
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 000000000..3ccaabf28
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for Samsung platforms
+#
+config PHY_EXYNOS_DP_VIDEO
+ tristate "Exynos SoC series Display Port PHY driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select GENERIC_PHY
+ help
+ Support for Display Port PHY found on Samsung Exynos SoCs.
+
+config PHY_EXYNOS_MIPI_VIDEO
+ tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver"
+ depends on HAS_IOMEM
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ default y if ARCH_S5PV210 || ARCH_EXYNOS
+ help
+ Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+ and Exynos SoCs.
+
+config PHY_EXYNOS_PCIE
+ bool "Exynos PCIe PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable PCIe PHY support for Exynos SoC series.
+ This driver provides PHY interface for Exynos PCIe controller.
+
+config PHY_SAMSUNG_UFS
+ tristate "Exynos SoC series UFS PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the Samsung Exynos SoC UFS PHY driver for
+ Samsung Exynos SoCs. This driver provides the interface for UFS host
+ controller to do PHY related programming.
+
+config PHY_SAMSUNG_USB2
+ tristate "S5P/Exynos SoC series USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default ARCH_EXYNOS
+ help
+ Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+ S5Pv210 and Exynos SoCs. This driver provides the interface for USB
+ 2.0 PHY. Support for particular PHYs will be enabled based on the SoC
+ type in addition to this driver.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS3250 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210 || COMPILE_TEST
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS5_USBDRD
+ tristate "Exynos5 SoC series USB DRD PHY driver"
+ depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default y
+ help
+ Enable USB DRD PHY support for Exynos 5 SoC series.
+ This driver provides PHY interface for USB 3.0 DRD controller
+ present on Exynos5 SoC series.
+
+config PHY_EXYNOS5250_SATA
+ tristate "Exynos5250 Sata SerDes/PHY driver"
+ depends on SOC_EXYNOS5250
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ select I2C
+ select I2C_S3C2410
+ select MFD_SYSCON
+ help
+ Enable this to support SATA SerDes/Phy found on Samsung's
+ Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+ SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+ port to accept one SATA device.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 000000000..afb34a153
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-exynos-ufs.o
+phy-exynos-ufs-y += phy-samsung-ufs.o
+phy-exynos-ufs-y += phy-exynos7-ufs.o
+phy-exynos-ufs-y += phy-exynosautov9-ufs.o
+phy-exynos-ufs-y += phy-fsd-ufs.o
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
new file mode 100644
index 000000000..2b670ef91
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung Exynos SoC series Display Port PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+struct exynos_dp_video_phy_drvdata {
+ u32 phy_ctrl_offset;
+};
+
+struct exynos_dp_video_phy {
+ struct regmap *regs;
+ const struct exynos_dp_video_phy_drvdata *drvdata;
+};
+
+static int exynos_dp_video_phy_power_on(struct phy *phy)
+{
+ struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+ /* Disable power isolation on DP-PHY */
+ return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
+ EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE);
+}
+
+static int exynos_dp_video_phy_power_off(struct phy *phy)
+{
+ struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
+
+ /* Enable power isolation on DP-PHY */
+ return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
+ EXYNOS4_PHY_ENABLE, 0);
+}
+
+static const struct phy_ops exynos_dp_video_phy_ops = {
+ .power_on = exynos_dp_video_phy_power_on,
+ .power_off = exynos_dp_video_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = {
+ .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL,
+};
+
+static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = {
+ .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL,
+};
+
+static const struct of_device_id exynos_dp_video_phy_of_match[] = {
+ {
+ .compatible = "samsung,exynos5250-dp-video-phy",
+ .data = &exynos5250_dp_video_phy,
+ }, {
+ .compatible = "samsung,exynos5420-dp-video-phy",
+ .data = &exynos5420_dp_video_phy,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
+
+static int exynos_dp_video_phy_probe(struct platform_device *pdev)
+{
+ struct exynos_dp_video_phy *state;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct phy *phy;
+
+ state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ state->regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,pmu-syscon");
+ if (IS_ERR(state->regs)) {
+ dev_err(dev, "Failed to lookup PMU regmap\n");
+ return PTR_ERR(state->regs);
+ }
+
+ state->drvdata = of_device_get_match_data(dev);
+
+ phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create Display Port PHY\n");
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, state);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver exynos_dp_video_phy_driver = {
+ .probe = exynos_dp_video_phy_probe,
+ .driver = {
+ .name = "exynos-dp-video-phy",
+ .of_match_table = exynos_dp_video_phy_of_match,
+ .suppress_bind_attrs = true,
+ }
+};
+module_platform_driver(exynos_dp_video_phy_driver);
+
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
+MODULE_DESCRIPTION("Samsung Exynos SoC DP PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
new file mode 100644
index 000000000..c1df1ef3e
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver
+ *
+ * Copyright (C) 2013,2016 Samsung Electronics Co., Ltd.
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+#include <linux/mfd/syscon.h>
+
+enum exynos_mipi_phy_id {
+ EXYNOS_MIPI_PHY_ID_NONE = -1,
+ EXYNOS_MIPI_PHY_ID_CSIS0,
+ EXYNOS_MIPI_PHY_ID_DSIM0,
+ EXYNOS_MIPI_PHY_ID_CSIS1,
+ EXYNOS_MIPI_PHY_ID_DSIM1,
+ EXYNOS_MIPI_PHY_ID_CSIS2,
+ EXYNOS_MIPI_PHYS_NUM
+};
+
+enum exynos_mipi_phy_regmap_id {
+ EXYNOS_MIPI_REGMAP_PMU,
+ EXYNOS_MIPI_REGMAP_DISP,
+ EXYNOS_MIPI_REGMAP_CAM0,
+ EXYNOS_MIPI_REGMAP_CAM1,
+ EXYNOS_MIPI_REGMAPS_NUM
+};
+
+struct mipi_phy_device_desc {
+ int num_phys;
+ int num_regmaps;
+ const char *regmap_names[EXYNOS_MIPI_REGMAPS_NUM];
+ struct exynos_mipi_phy_desc {
+ enum exynos_mipi_phy_id coupled_phy_id;
+ u32 enable_val;
+ unsigned int enable_reg;
+ enum exynos_mipi_phy_regmap_id enable_map;
+ u32 resetn_val;
+ unsigned int resetn_reg;
+ enum exynos_mipi_phy_regmap_id resetn_map;
+ } phys[EXYNOS_MIPI_PHYS_NUM];
+};
+
+static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
+ .num_regmaps = 1,
+ .regmap_names = {"syscon"},
+ .num_phys = 4,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ },
+ },
+};
+
+static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
+ .num_regmaps = 1,
+ .regmap_names = {"syscon"},
+ .num_phys = 5,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS2 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
+ .resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
+ .resetn_map = EXYNOS_MIPI_REGMAP_PMU,
+ },
+ },
+};
+
+#define EXYNOS5433_SYSREG_DISP_MIPI_PHY 0x100C
+#define EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON 0x1014
+#define EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON 0x1020
+
+static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
+ .num_regmaps = 4,
+ .regmap_names = {
+ "samsung,pmu-syscon",
+ "samsung,disp-sysreg",
+ "samsung,cam0-sysreg",
+ "samsung,cam1-sysreg"
+ },
+ .num_phys = 5,
+ .phys = {
+ {
+ /* EXYNOS_MIPI_PHY_ID_CSIS0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM0 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+ .resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(1),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM0,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_DSIM1 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(1),
+ .resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
+ .resetn_map = EXYNOS_MIPI_REGMAP_DISP,
+ }, {
+ /* EXYNOS_MIPI_PHY_ID_CSIS2 */
+ .coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
+ .enable_val = EXYNOS4_PHY_ENABLE,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
+ .enable_map = EXYNOS_MIPI_REGMAP_PMU,
+ .resetn_val = BIT(0),
+ .resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
+ .resetn_map = EXYNOS_MIPI_REGMAP_CAM1,
+ },
+ },
+};
+
+struct exynos_mipi_video_phy {
+ struct regmap *regmaps[EXYNOS_MIPI_REGMAPS_NUM];
+ int num_phys;
+ struct video_phy_desc {
+ struct phy *phy;
+ unsigned int index;
+ const struct exynos_mipi_phy_desc *data;
+ } phys[EXYNOS_MIPI_PHYS_NUM];
+ spinlock_t slock;
+};
+
+static int __set_phy_state(const struct exynos_mipi_phy_desc *data,
+ struct exynos_mipi_video_phy *state, unsigned int on)
+{
+ struct regmap *enable_map = state->regmaps[data->enable_map];
+ struct regmap *resetn_map = state->regmaps[data->resetn_map];
+
+ spin_lock(&state->slock);
+
+ /* disable in PMU sysreg */
+ if (!on && data->coupled_phy_id >= 0 &&
+ state->phys[data->coupled_phy_id].phy->power_count == 0)
+ regmap_update_bits(enable_map, data->enable_reg,
+ data->enable_val, 0);
+ /* PHY reset */
+ if (on)
+ regmap_update_bits(resetn_map, data->resetn_reg,
+ data->resetn_val, data->resetn_val);
+ else
+ regmap_update_bits(resetn_map, data->resetn_reg,
+ data->resetn_val, 0);
+ /* enable in PMU sysreg */
+ if (on)
+ regmap_update_bits(enable_map, data->enable_reg,
+ data->enable_val, data->enable_val);
+
+ spin_unlock(&state->slock);
+
+ return 0;
+}
+
+#define to_mipi_video_phy(desc) \
+ container_of((desc), struct exynos_mipi_video_phy, phys[(desc)->index])
+
+static int exynos_mipi_video_phy_power_on(struct phy *phy)
+{
+ struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
+ struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
+
+ return __set_phy_state(phy_desc->data, state, 1);
+}
+
+static int exynos_mipi_video_phy_power_off(struct phy *phy)
+{
+ struct video_phy_desc *phy_desc = phy_get_drvdata(phy);
+ struct exynos_mipi_video_phy *state = to_mipi_video_phy(phy_desc);
+
+ return __set_phy_state(phy_desc->data, state, 0);
+}
+
+static struct phy *exynos_mipi_video_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct exynos_mipi_video_phy *state = dev_get_drvdata(dev);
+
+ if (WARN_ON(args->args[0] >= state->num_phys))
+ return ERR_PTR(-ENODEV);
+
+ return state->phys[args->args[0]].phy;
+}
+
+static const struct phy_ops exynos_mipi_video_phy_ops = {
+ .power_on = exynos_mipi_video_phy_power_on,
+ .power_off = exynos_mipi_video_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int exynos_mipi_video_phy_probe(struct platform_device *pdev)
+{
+ const struct mipi_phy_device_desc *phy_dev;
+ struct exynos_mipi_video_phy *state;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+ unsigned int i;
+
+ phy_dev = of_device_get_match_data(dev);
+ if (!phy_dev)
+ return -ENODEV;
+
+ state = devm_kzalloc(dev, sizeof(*state), GFP_KERNEL);
+ if (!state)
+ return -ENOMEM;
+
+ for (i = 0; i < phy_dev->num_regmaps; i++) {
+ state->regmaps[i] = syscon_regmap_lookup_by_phandle(np,
+ phy_dev->regmap_names[i]);
+ if (IS_ERR(state->regmaps[i]))
+ return PTR_ERR(state->regmaps[i]);
+ }
+ state->num_phys = phy_dev->num_phys;
+ spin_lock_init(&state->slock);
+
+ dev_set_drvdata(dev, state);
+
+ for (i = 0; i < state->num_phys; i++) {
+ struct phy *phy = devm_phy_create(dev, NULL,
+ &exynos_mipi_video_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create PHY %d\n", i);
+ return PTR_ERR(phy);
+ }
+
+ state->phys[i].phy = phy;
+ state->phys[i].index = i;
+ state->phys[i].data = &phy_dev->phys[i];
+ phy_set_drvdata(phy, &state->phys[i]);
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ exynos_mipi_video_phy_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id exynos_mipi_video_phy_of_match[] = {
+ {
+ .compatible = "samsung,s5pv210-mipi-video-phy",
+ .data = &s5pv210_mipi_phy,
+ }, {
+ .compatible = "samsung,exynos5420-mipi-video-phy",
+ .data = &exynos5420_mipi_phy,
+ }, {
+ .compatible = "samsung,exynos5433-mipi-video-phy",
+ .data = &exynos5433_mipi_phy,
+ },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, exynos_mipi_video_phy_of_match);
+
+static struct platform_driver exynos_mipi_video_phy_driver = {
+ .probe = exynos_mipi_video_phy_probe,
+ .driver = {
+ .of_match_table = exynos_mipi_video_phy_of_match,
+ .name = "exynos-mipi-video-phy",
+ .suppress_bind_attrs = true,
+ }
+};
+module_platform_driver(exynos_mipi_video_phy_driver);
+
+MODULE_DESCRIPTION("Samsung S5P/Exynos SoC MIPI CSI-2/DSI PHY driver");
+MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
new file mode 100644
index 000000000..53c9230c2
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung Exynos SoC series PCIe PHY driver
+ *
+ * Phy provider for PCIe controller on Exynos SoC series
+ *
+ * Copyright (C) 2017-2020 Samsung Electronics Co., Ltd.
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ */
+
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#define PCIE_PHY_OFFSET(x) ((x) * 0x4)
+
+/* Sysreg FSYS register offsets and bits for Exynos5433 */
+#define PCIE_EXYNOS5433_PHY_MAC_RESET 0x0208
+#define PCIE_MAC_RESET_MASK 0xFF
+#define PCIE_MAC_RESET BIT(4)
+#define PCIE_EXYNOS5433_PHY_L1SUB_CM_CON 0x1010
+#define PCIE_REFCLK_GATING_EN BIT(0)
+#define PCIE_EXYNOS5433_PHY_COMMON_RESET 0x1020
+#define PCIE_PHY_RESET BIT(0)
+#define PCIE_EXYNOS5433_PHY_GLOBAL_RESET 0x1040
+#define PCIE_GLOBAL_RESET BIT(0)
+#define PCIE_REFCLK BIT(1)
+#define PCIE_REFCLK_MASK 0x16
+#define PCIE_APP_REQ_EXIT_L1_MODE BIT(5)
+
+/* PMU PCIE PHY isolation control */
+#define EXYNOS5433_PMU_PCIE_PHY_OFFSET 0x730
+
+/* For Exynos pcie phy */
+struct exynos_pcie_phy {
+ void __iomem *base;
+ struct regmap *pmureg;
+ struct regmap *fsysreg;
+};
+
+static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset)
+{
+ writel(val, base + offset);
+}
+
+/* Exynos5433 specific functions */
+static int exynos5433_pcie_phy_init(struct phy *phy)
+{
+ struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+
+ regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET,
+ BIT(0), 1);
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET,
+ PCIE_APP_REQ_EXIT_L1_MODE, 0);
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON,
+ PCIE_REFCLK_GATING_EN, 0);
+
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET,
+ PCIE_PHY_RESET, 1);
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET,
+ PCIE_MAC_RESET, 0);
+
+ /* PHY refclk 24MHz */
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET,
+ PCIE_REFCLK_MASK, PCIE_REFCLK);
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET,
+ PCIE_GLOBAL_RESET, 0);
+
+
+ exynos_pcie_phy_writel(ep->base, 0x11, PCIE_PHY_OFFSET(0x3));
+
+ /* band gap reference on */
+ exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x20));
+ exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x4b));
+
+ /* jitter tuning */
+ exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x4));
+ exynos_pcie_phy_writel(ep->base, 0x02, PCIE_PHY_OFFSET(0x7));
+ exynos_pcie_phy_writel(ep->base, 0x41, PCIE_PHY_OFFSET(0x21));
+ exynos_pcie_phy_writel(ep->base, 0x7F, PCIE_PHY_OFFSET(0x14));
+ exynos_pcie_phy_writel(ep->base, 0xC0, PCIE_PHY_OFFSET(0x15));
+ exynos_pcie_phy_writel(ep->base, 0x61, PCIE_PHY_OFFSET(0x36));
+
+ /* D0 uninit.. */
+ exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x3D));
+
+ /* 24MHz */
+ exynos_pcie_phy_writel(ep->base, 0x94, PCIE_PHY_OFFSET(0x8));
+ exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x9));
+ exynos_pcie_phy_writel(ep->base, 0x93, PCIE_PHY_OFFSET(0xA));
+ exynos_pcie_phy_writel(ep->base, 0x6B, PCIE_PHY_OFFSET(0xC));
+ exynos_pcie_phy_writel(ep->base, 0xA5, PCIE_PHY_OFFSET(0xF));
+ exynos_pcie_phy_writel(ep->base, 0x34, PCIE_PHY_OFFSET(0x16));
+ exynos_pcie_phy_writel(ep->base, 0xA3, PCIE_PHY_OFFSET(0x17));
+ exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x1A));
+ exynos_pcie_phy_writel(ep->base, 0x71, PCIE_PHY_OFFSET(0x23));
+ exynos_pcie_phy_writel(ep->base, 0x4C, PCIE_PHY_OFFSET(0x24));
+
+ exynos_pcie_phy_writel(ep->base, 0x0E, PCIE_PHY_OFFSET(0x26));
+ exynos_pcie_phy_writel(ep->base, 0x14, PCIE_PHY_OFFSET(0x7));
+ exynos_pcie_phy_writel(ep->base, 0x48, PCIE_PHY_OFFSET(0x43));
+ exynos_pcie_phy_writel(ep->base, 0x44, PCIE_PHY_OFFSET(0x44));
+ exynos_pcie_phy_writel(ep->base, 0x03, PCIE_PHY_OFFSET(0x45));
+ exynos_pcie_phy_writel(ep->base, 0xA7, PCIE_PHY_OFFSET(0x48));
+ exynos_pcie_phy_writel(ep->base, 0x13, PCIE_PHY_OFFSET(0x54));
+ exynos_pcie_phy_writel(ep->base, 0x04, PCIE_PHY_OFFSET(0x31));
+ exynos_pcie_phy_writel(ep->base, 0, PCIE_PHY_OFFSET(0x32));
+
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET,
+ PCIE_PHY_RESET, 0);
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET,
+ PCIE_MAC_RESET_MASK, PCIE_MAC_RESET);
+ return 0;
+}
+
+static int exynos5433_pcie_phy_exit(struct phy *phy)
+{
+ struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+
+ regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON,
+ PCIE_REFCLK_GATING_EN, PCIE_REFCLK_GATING_EN);
+ regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET,
+ BIT(0), 0);
+ return 0;
+}
+
+static const struct phy_ops exynos5433_phy_ops = {
+ .init = exynos5433_pcie_phy_init,
+ .exit = exynos5433_pcie_phy_exit,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id exynos_pcie_phy_match[] = {
+ {
+ .compatible = "samsung,exynos5433-pcie-phy",
+ },
+ {},
+};
+
+static int exynos_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct exynos_pcie_phy *exynos_phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+
+ exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL);
+ if (!exynos_phy)
+ return -ENOMEM;
+
+ exynos_phy->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(exynos_phy->base))
+ return PTR_ERR(exynos_phy->base);
+
+ exynos_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,pmu-syscon");
+ if (IS_ERR(exynos_phy->pmureg)) {
+ dev_err(&pdev->dev, "PMU regmap lookup failed.\n");
+ return PTR_ERR(exynos_phy->pmureg);
+ }
+
+ exynos_phy->fsysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,fsys-sysreg");
+ if (IS_ERR(exynos_phy->fsysreg)) {
+ dev_err(&pdev->dev, "FSYS sysreg regmap lookup failed.\n");
+ return PTR_ERR(exynos_phy->fsysreg);
+ }
+
+ generic_phy = devm_phy_create(dev, dev->of_node, &exynos5433_phy_ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, exynos_phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver exynos_pcie_phy_driver = {
+ .probe = exynos_pcie_phy_probe,
+ .driver = {
+ .of_match_table = exynos_pcie_phy_match,
+ .name = "exynos_pcie_phy",
+ .suppress_bind_attrs = true,
+ }
+};
+builtin_platform_driver(exynos_pcie_phy_driver);
diff --git a/drivers/phy/samsung/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
new file mode 100644
index 000000000..3898a7f58
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos4210-usb2.c
@@ -0,0 +1,257 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@samsung.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include "phy-samsung-usb2.h"
+
+/* Exynos USB PHY registers */
+
+/* PHY power control */
+#define EXYNOS_4210_UPHYPWR 0x0
+
+#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0)
+#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3)
+#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4)
+#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5)
+#define EXYNOS_4210_UPHYPWR_PHY0 ( \
+ EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \
+ EXYNOS_4210_UPHYPWR_PHY0_PWR | \
+ EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \
+ EXYNOS_4210_UPHYPWR_PHY0_SLEEP)
+
+#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6)
+#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7)
+#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8)
+#define EXYNOS_4210_UPHYPWR_PHY1 ( \
+ EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \
+ EXYNOS_4210_UPHYPWR_PHY1_PWR | \
+ EXYNOS_4210_UPHYPWR_PHY1_SLEEP)
+
+#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9)
+#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10)
+#define EXYNOS_4210_UPHYPWR_HSIC0 ( \
+ EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \
+ EXYNOS_4210_UPHYPWR_HSIC0_SLEEP)
+
+#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11)
+#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12)
+#define EXYNOS_4210_UPHYPWR_HSIC1 ( \
+ EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \
+ EXYNOS_4210_UPHYPWR_HSIC1_SLEEP)
+
+/* PHY clock control */
+#define EXYNOS_4210_UPHYCLK 0x4
+
+#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
+#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0
+#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
+#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
+#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
+
+#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2)
+#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4)
+#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7)
+
+/* PHY reset control */
+#define EXYNOS_4210_UPHYRST 0x8
+
+#define EXYNOS_4210_URSTCON_PHY0 BIT(0)
+#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1)
+#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2)
+#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3)
+#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4)
+#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5)
+#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6)
+#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7)
+#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8)
+#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9)
+
+/* Isolation, configured in the power management unit */
+#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704
+#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0)
+#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708
+#define EXYNOS_4210_USB_ISOL_HOST BIT(0)
+
+/* USBYPHY1 Floating prevention */
+#define EXYNOS_4210_UPHY1CON 0x34
+#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1
+
+/* Mode switching SUB Device <-> Host */
+#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c
+#define EXYNOS_4210_MODE_SWITCH_MASK 1
+#define EXYNOS_4210_MODE_SWITCH_DEVICE 0
+#define EXYNOS_4210_MODE_SWITCH_HOST 1
+
+enum exynos4210_phy_id {
+ EXYNOS4210_DEVICE,
+ EXYNOS4210_HOST,
+ EXYNOS4210_HSIC0,
+ EXYNOS4210_HSIC1,
+ EXYNOS4210_NUM_PHYS,
+};
+
+/*
+ * exynos4210_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register.
+ */
+static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg)
+{
+ switch (rate) {
+ case 12 * MHZ:
+ *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ;
+ break;
+ case 24 * MHZ:
+ *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ;
+ break;
+ case 48 * MHZ:
+ *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 offset;
+ u32 mask;
+
+ switch (inst->cfg->id) {
+ case EXYNOS4210_DEVICE:
+ offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET;
+ mask = EXYNOS_4210_USB_ISOL_DEVICE;
+ break;
+ case EXYNOS4210_HOST:
+ offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET;
+ mask = EXYNOS_4210_USB_ISOL_HOST;
+ break;
+ default:
+ return;
+ }
+
+ regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
+}
+
+static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 rstbits = 0;
+ u32 phypwr = 0;
+ u32 rst;
+ u32 pwr;
+ u32 clk;
+
+ switch (inst->cfg->id) {
+ case EXYNOS4210_DEVICE:
+ phypwr = EXYNOS_4210_UPHYPWR_PHY0;
+ rstbits = EXYNOS_4210_URSTCON_PHY0;
+ break;
+ case EXYNOS4210_HOST:
+ phypwr = EXYNOS_4210_UPHYPWR_PHY1;
+ rstbits = EXYNOS_4210_URSTCON_PHY1_ALL |
+ EXYNOS_4210_URSTCON_PHY1_P0 |
+ EXYNOS_4210_URSTCON_PHY1_P1P2 |
+ EXYNOS_4210_URSTCON_HOST_LINK_ALL |
+ EXYNOS_4210_URSTCON_HOST_LINK_P0;
+ writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON);
+ break;
+ case EXYNOS4210_HSIC0:
+ phypwr = EXYNOS_4210_UPHYPWR_HSIC0;
+ rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
+ EXYNOS_4210_URSTCON_HOST_LINK_P1;
+ break;
+ case EXYNOS4210_HSIC1:
+ phypwr = EXYNOS_4210_UPHYPWR_HSIC1;
+ rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 |
+ EXYNOS_4210_URSTCON_HOST_LINK_P2;
+ break;
+ }
+
+ if (on) {
+ clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK);
+ clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK;
+ clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET;
+ writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK);
+
+ pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
+ pwr &= ~phypwr;
+ writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
+
+ rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST);
+ rst |= rstbits;
+ writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
+ udelay(10);
+ rst &= ~rstbits;
+ writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST);
+ /* The following delay is necessary for the reset sequence to be
+ * completed */
+ udelay(80);
+ } else {
+ pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR);
+ pwr |= phypwr;
+ writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR);
+ }
+}
+
+static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst)
+{
+ /* Order of initialisation is important - first power then isolation */
+ exynos4210_phy_pwr(inst, 1);
+ exynos4210_isol(inst, 0);
+
+ return 0;
+}
+
+static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst)
+{
+ exynos4210_isol(inst, 1);
+ exynos4210_phy_pwr(inst, 0);
+
+ return 0;
+}
+
+
+static const struct samsung_usb2_common_phy exynos4210_phys[] = {
+ {
+ .label = "device",
+ .id = EXYNOS4210_DEVICE,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {
+ .label = "host",
+ .id = EXYNOS4210_HOST,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {
+ .label = "hsic0",
+ .id = EXYNOS4210_HSIC0,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+ {
+ .label = "hsic1",
+ .id = EXYNOS4210_HSIC1,
+ .power_on = exynos4210_power_on,
+ .power_off = exynos4210_power_off,
+ },
+};
+
+const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = {
+ .has_mode_switch = 0,
+ .num_phys = EXYNOS4210_NUM_PHYS,
+ .phys = exynos4210_phys,
+ .rate_to_clk = exynos4210_rate_to_clk,
+};
diff --git a/drivers/phy/samsung/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
new file mode 100644
index 000000000..b528a5d03
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos4x12-usb2.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@samsung.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include "phy-samsung-usb2.h"
+
+/* Exynos USB PHY registers */
+
+/* PHY power control */
+#define EXYNOS_4x12_UPHYPWR 0x0
+
+#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0)
+#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3)
+#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4)
+#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5)
+#define EXYNOS_4x12_UPHYPWR_PHY0 ( \
+ EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \
+ EXYNOS_4x12_UPHYPWR_PHY0_PWR | \
+ EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \
+ EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)
+
+#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6)
+#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7)
+#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8)
+#define EXYNOS_4x12_UPHYPWR_PHY1 ( \
+ EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \
+ EXYNOS_4x12_UPHYPWR_PHY1_PWR | \
+ EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)
+
+#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9)
+#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10)
+#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11)
+#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
+ EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \
+ EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \
+ EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)
+
+#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12)
+#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13)
+#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14)
+#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
+ EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \
+ EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \
+ EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)
+
+/* PHY clock control */
+#define EXYNOS_4x12_UPHYCLK 0x4
+
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0)
+#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0)
+
+#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8)
+
+#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3)
+#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4)
+#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7)
+
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10)
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10)
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10)
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10)
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10)
+#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10)
+
+/* PHY reset control */
+#define EXYNOS_4x12_UPHYRST 0x8
+
+#define EXYNOS_4x12_URSTCON_PHY0 BIT(0)
+#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1)
+#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2)
+#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3)
+/* The following bit defines are presented in the
+ * order taken from the Exynos4412 reference manual.
+ *
+ * During experiments with the hardware and debugging
+ * it was determined that the hardware behaves contrary
+ * to the manual.
+ *
+ * The following bit values were chaned accordingly to the
+ * results of real hardware experiments.
+ */
+#define EXYNOS_4x12_URSTCON_PHY1 BIT(4)
+#define EXYNOS_4x12_URSTCON_HSIC0 BIT(6)
+#define EXYNOS_4x12_URSTCON_HSIC1 BIT(5)
+#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7)
+#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(10)
+#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9)
+#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(8)
+
+/* Isolation, configured in the power management unit */
+#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704
+#define EXYNOS_4x12_USB_ISOL_OTG BIT(0)
+#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708
+#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0)
+#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c
+#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0)
+
+/* Mode switching SUB Device <-> Host */
+#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c
+#define EXYNOS_4x12_MODE_SWITCH_MASK 1
+#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0
+#define EXYNOS_4x12_MODE_SWITCH_HOST 1
+
+enum exynos4x12_phy_id {
+ EXYNOS4x12_DEVICE,
+ EXYNOS4x12_HOST,
+ EXYNOS4x12_HSIC0,
+ EXYNOS4x12_HSIC1,
+ EXYNOS4x12_NUM_PHYS,
+};
+
+/*
+ * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register.
+ */
+static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg)
+{
+ /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */
+
+ switch (rate) {
+ case 9600 * KHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6;
+ break;
+ case 10 * MHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ;
+ break;
+ case 12 * MHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ;
+ break;
+ case 19200 * KHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2;
+ break;
+ case 20 * MHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ;
+ break;
+ case 24 * MHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ;
+ break;
+ case 50 * MHZ:
+ *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 offset;
+ u32 mask;
+
+ switch (inst->cfg->id) {
+ case EXYNOS4x12_DEVICE:
+ case EXYNOS4x12_HOST:
+ offset = EXYNOS_4x12_USB_ISOL_OFFSET;
+ mask = EXYNOS_4x12_USB_ISOL_OTG;
+ break;
+ case EXYNOS4x12_HSIC0:
+ offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET;
+ mask = EXYNOS_4x12_USB_ISOL_HSIC0;
+ break;
+ case EXYNOS4x12_HSIC1:
+ offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET;
+ mask = EXYNOS_4x12_USB_ISOL_HSIC1;
+ break;
+ default:
+ return;
+ }
+
+ regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
+}
+
+static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 clk;
+
+ clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK);
+ clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK;
+
+ if (drv->cfg->has_refclk_sel)
+ clk = EXYNOS_3250_UPHYCLK_REFCLKSEL;
+
+ clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET;
+ clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON;
+ writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK);
+}
+
+static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 rstbits = 0;
+ u32 phypwr = 0;
+ u32 rst;
+ u32 pwr;
+
+ switch (inst->cfg->id) {
+ case EXYNOS4x12_DEVICE:
+ phypwr = EXYNOS_4x12_UPHYPWR_PHY0;
+ rstbits = EXYNOS_4x12_URSTCON_PHY0;
+ break;
+ case EXYNOS4x12_HOST:
+ phypwr = EXYNOS_4x12_UPHYPWR_PHY1;
+ rstbits = EXYNOS_4x12_URSTCON_HOST_PHY |
+ EXYNOS_4x12_URSTCON_PHY1 |
+ EXYNOS_4x12_URSTCON_HOST_LINK_P0;
+ break;
+ case EXYNOS4x12_HSIC0:
+ phypwr = EXYNOS_4x12_UPHYPWR_HSIC0;
+ rstbits = EXYNOS_4x12_URSTCON_HSIC0 |
+ EXYNOS_4x12_URSTCON_HOST_LINK_P1;
+ break;
+ case EXYNOS4x12_HSIC1:
+ phypwr = EXYNOS_4x12_UPHYPWR_HSIC1;
+ rstbits = EXYNOS_4x12_URSTCON_HSIC1 |
+ EXYNOS_4x12_URSTCON_HOST_LINK_P1;
+ break;
+ }
+
+ if (on) {
+ pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
+ pwr &= ~phypwr;
+ writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
+
+ rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST);
+ rst |= rstbits;
+ writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
+ udelay(10);
+ rst &= ~rstbits;
+ writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
+ /* The following delay is necessary for the reset sequence to be
+ * completed */
+ udelay(80);
+ } else {
+ pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
+ pwr |= phypwr;
+ writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
+ }
+}
+
+static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst)
+{
+ if (inst->int_cnt++ > 0)
+ return;
+
+ exynos4x12_setup_clk(inst);
+ exynos4x12_isol(inst, 0);
+ exynos4x12_phy_pwr(inst, 1);
+}
+
+static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+
+ if (inst->ext_cnt++ > 0)
+ return 0;
+
+ if (inst->cfg->id == EXYNOS4x12_HOST) {
+ regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
+ EXYNOS_4x12_MODE_SWITCH_MASK,
+ EXYNOS_4x12_MODE_SWITCH_HOST);
+ exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
+ }
+
+ if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
+ regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
+ EXYNOS_4x12_MODE_SWITCH_MASK,
+ EXYNOS_4x12_MODE_SWITCH_DEVICE);
+
+ if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
+ inst->cfg->id == EXYNOS4x12_HSIC1) {
+ exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
+ exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]);
+ }
+
+ exynos4x12_power_on_int(inst);
+
+ return 0;
+}
+
+static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst)
+{
+ if (inst->int_cnt-- > 1)
+ return;
+
+ exynos4x12_isol(inst, 1);
+ exynos4x12_phy_pwr(inst, 0);
+}
+
+static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+
+ if (inst->ext_cnt-- > 1)
+ return 0;
+
+ if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
+ regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
+ EXYNOS_4x12_MODE_SWITCH_MASK,
+ EXYNOS_4x12_MODE_SWITCH_HOST);
+
+ if (inst->cfg->id == EXYNOS4x12_HOST)
+ exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
+
+ if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
+ inst->cfg->id == EXYNOS4x12_HSIC1) {
+ exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
+ exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]);
+ }
+
+ exynos4x12_power_off_int(inst);
+
+ return 0;
+}
+
+
+static const struct samsung_usb2_common_phy exynos4x12_phys[] = {
+ {
+ .label = "device",
+ .id = EXYNOS4x12_DEVICE,
+ .power_on = exynos4x12_power_on,
+ .power_off = exynos4x12_power_off,
+ },
+ {
+ .label = "host",
+ .id = EXYNOS4x12_HOST,
+ .power_on = exynos4x12_power_on,
+ .power_off = exynos4x12_power_off,
+ },
+ {
+ .label = "hsic0",
+ .id = EXYNOS4x12_HSIC0,
+ .power_on = exynos4x12_power_on,
+ .power_off = exynos4x12_power_off,
+ },
+ {
+ .label = "hsic1",
+ .id = EXYNOS4x12_HSIC1,
+ .power_on = exynos4x12_power_on,
+ .power_off = exynos4x12_power_off,
+ },
+};
+
+const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = {
+ .has_refclk_sel = 1,
+ .num_phys = 1,
+ .phys = exynos4x12_phys,
+ .rate_to_clk = exynos4x12_rate_to_clk,
+};
+
+const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = {
+ .has_mode_switch = 1,
+ .num_phys = EXYNOS4x12_NUM_PHYS,
+ .phys = exynos4x12_phys,
+ .rate_to_clk = exynos4x12_rate_to_clk,
+};
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
new file mode 100644
index 000000000..ee0848fe8
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -0,0 +1,949 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung Exynos5 SoC series USB DRD PHY driver
+ *
+ * Phy provider for USB 3.0 DRD controller on Exynos5 SoC series
+ *
+ * Copyright (C) 2014 Samsung Electronics Co., Ltd.
+ * Author: Vivek Gautam <gautam.vivek@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
+
+/* Exynos USB PHY registers */
+#define EXYNOS5_FSEL_9MHZ6 0x0
+#define EXYNOS5_FSEL_10MHZ 0x1
+#define EXYNOS5_FSEL_12MHZ 0x2
+#define EXYNOS5_FSEL_19MHZ2 0x3
+#define EXYNOS5_FSEL_20MHZ 0x4
+#define EXYNOS5_FSEL_24MHZ 0x5
+#define EXYNOS5_FSEL_50MHZ 0x7
+
+/* Exynos5: USB 3.0 DRD PHY registers */
+#define EXYNOS5_DRD_LINKSYSTEM 0x04
+
+#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
+#define LINKSYSTEM_FLADJ(_x) ((_x) << 1)
+#define LINKSYSTEM_XHCI_VERSION_CONTROL BIT(27)
+
+#define EXYNOS5_DRD_PHYUTMI 0x08
+
+#define PHYUTMI_OTGDISABLE BIT(6)
+#define PHYUTMI_FORCESUSPEND BIT(1)
+#define PHYUTMI_FORCESLEEP BIT(0)
+
+#define EXYNOS5_DRD_PHYPIPE 0x0c
+
+#define EXYNOS5_DRD_PHYCLKRST 0x10
+
+#define PHYCLKRST_EN_UTMISUSPEND BIT(31)
+
+#define PHYCLKRST_SSC_REFCLKSEL_MASK (0xff << 23)
+#define PHYCLKRST_SSC_REFCLKSEL(_x) ((_x) << 23)
+
+#define PHYCLKRST_SSC_RANGE_MASK (0x03 << 21)
+#define PHYCLKRST_SSC_RANGE(_x) ((_x) << 21)
+
+#define PHYCLKRST_SSC_EN BIT(20)
+#define PHYCLKRST_REF_SSP_EN BIT(19)
+#define PHYCLKRST_REF_CLKDIV2 BIT(18)
+
+#define PHYCLKRST_MPLL_MULTIPLIER_MASK (0x7f << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF (0x19 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF (0x32 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF (0x68 << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF (0x7d << 11)
+#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF (0x02 << 11)
+
+#define PHYCLKRST_FSEL_UTMI_MASK (0x7 << 5)
+#define PHYCLKRST_FSEL_PIPE_MASK (0x7 << 8)
+#define PHYCLKRST_FSEL(_x) ((_x) << 5)
+#define PHYCLKRST_FSEL_PAD_100MHZ (0x27 << 5)
+#define PHYCLKRST_FSEL_PAD_24MHZ (0x2a << 5)
+#define PHYCLKRST_FSEL_PAD_20MHZ (0x31 << 5)
+#define PHYCLKRST_FSEL_PAD_19_2MHZ (0x38 << 5)
+
+#define PHYCLKRST_RETENABLEN BIT(4)
+
+#define PHYCLKRST_REFCLKSEL_MASK (0x03 << 2)
+#define PHYCLKRST_REFCLKSEL_PAD_REFCLK (0x2 << 2)
+#define PHYCLKRST_REFCLKSEL_EXT_REFCLK (0x3 << 2)
+
+#define PHYCLKRST_PORTRESET BIT(1)
+#define PHYCLKRST_COMMONONN BIT(0)
+
+#define EXYNOS5_DRD_PHYREG0 0x14
+#define PHYREG0_SSC_REF_CLK_SEL BIT(21)
+#define PHYREG0_SSC_RANGE BIT(20)
+#define PHYREG0_CR_WRITE BIT(19)
+#define PHYREG0_CR_READ BIT(18)
+#define PHYREG0_CR_DATA_IN(_x) ((_x) << 2)
+#define PHYREG0_CR_CAP_DATA BIT(1)
+#define PHYREG0_CR_CAP_ADDR BIT(0)
+
+#define EXYNOS5_DRD_PHYREG1 0x18
+#define PHYREG1_CR_DATA_OUT(_x) ((_x) << 1)
+#define PHYREG1_CR_ACK BIT(0)
+
+#define EXYNOS5_DRD_PHYPARAM0 0x1c
+
+#define PHYPARAM0_REF_USE_PAD BIT(31)
+#define PHYPARAM0_REF_LOSLEVEL_MASK (0x1f << 26)
+#define PHYPARAM0_REF_LOSLEVEL (0x9 << 26)
+
+#define EXYNOS5_DRD_PHYPARAM1 0x20
+
+#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH (0x1c)
+
+#define EXYNOS5_DRD_PHYTERM 0x24
+
+#define EXYNOS5_DRD_PHYTEST 0x28
+
+#define PHYTEST_POWERDOWN_SSP BIT(3)
+#define PHYTEST_POWERDOWN_HSP BIT(2)
+
+#define EXYNOS5_DRD_PHYADP 0x2c
+
+#define EXYNOS5_DRD_PHYUTMICLKSEL 0x30
+
+#define PHYUTMICLKSEL_UTMI_CLKSEL BIT(2)
+
+#define EXYNOS5_DRD_PHYRESUME 0x34
+#define EXYNOS5_DRD_LINKPORT 0x44
+
+/* USB 3.0 DRD PHY SS Function Control Reg; accessed by CR_PORT */
+#define EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN (0x15)
+#define LOSLEVEL_OVRD_IN_LOS_BIAS_5420 (0x5 << 13)
+#define LOSLEVEL_OVRD_IN_LOS_BIAS_DEFAULT (0x0 << 13)
+#define LOSLEVEL_OVRD_IN_EN (0x1 << 10)
+#define LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT (0x9 << 0)
+
+#define EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN (0x12)
+#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420 (0x5 << 13)
+#define TX_VBOOSTLEVEL_OVRD_IN_VBOOST_DEFAULT (0x4 << 13)
+
+#define EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG (0x1010)
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M (0x4 << 4)
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M (0x8 << 4)
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_25M_26M (0x8 << 4)
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M (0x20 << 4)
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_62M5 (0x20 << 4)
+#define LANE0_TX_DEBUG_RXDET_MEAS_TIME_96M_100M (0x40 << 4)
+
+#define KHZ 1000
+#define MHZ (KHZ * KHZ)
+
+enum exynos5_usbdrd_phy_id {
+ EXYNOS5_DRDPHY_UTMI,
+ EXYNOS5_DRDPHY_PIPE3,
+ EXYNOS5_DRDPHYS_NUM,
+};
+
+struct phy_usb_instance;
+struct exynos5_usbdrd_phy;
+
+struct exynos5_usbdrd_phy_config {
+ u32 id;
+ void (*phy_isol)(struct phy_usb_instance *inst, u32 on);
+ void (*phy_init)(struct exynos5_usbdrd_phy *phy_drd);
+ unsigned int (*set_refclk)(struct phy_usb_instance *inst);
+};
+
+struct exynos5_usbdrd_phy_drvdata {
+ const struct exynos5_usbdrd_phy_config *phy_cfg;
+ u32 pmu_offset_usbdrd0_phy;
+ u32 pmu_offset_usbdrd1_phy;
+ bool has_common_clk_gate;
+};
+
+/**
+ * struct exynos5_usbdrd_phy - driver data for USB 3.0 PHY
+ * @dev: pointer to device instance of this platform device
+ * @reg_phy: usb phy controller register memory base
+ * @clk: phy clock for register access
+ * @pipeclk: clock for pipe3 phy
+ * @utmiclk: clock for utmi+ phy
+ * @itpclk: clock for ITP generation
+ * @drv_data: pointer to SoC level driver data structure
+ * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
+ * instances each with its 'phy' and 'phy_cfg'.
+ * @extrefclk: frequency select settings when using 'separate
+ * reference clocks' for SS and HS operations
+ * @ref_clk: reference clock to PHY block from which PHY's
+ * operational clocks are derived
+ * @vbus: VBUS regulator for phy
+ * @vbus_boost: Boost regulator for VBUS present on few Exynos boards
+ */
+struct exynos5_usbdrd_phy {
+ struct device *dev;
+ void __iomem *reg_phy;
+ struct clk *clk;
+ struct clk *pipeclk;
+ struct clk *utmiclk;
+ struct clk *itpclk;
+ const struct exynos5_usbdrd_phy_drvdata *drv_data;
+ struct phy_usb_instance {
+ struct phy *phy;
+ u32 index;
+ struct regmap *reg_pmu;
+ u32 pmu_offset;
+ const struct exynos5_usbdrd_phy_config *phy_cfg;
+ } phys[EXYNOS5_DRDPHYS_NUM];
+ u32 extrefclk;
+ struct clk *ref_clk;
+ struct regulator *vbus;
+ struct regulator *vbus_boost;
+};
+
+static inline
+struct exynos5_usbdrd_phy *to_usbdrd_phy(struct phy_usb_instance *inst)
+{
+ return container_of((inst), struct exynos5_usbdrd_phy,
+ phys[(inst)->index]);
+}
+
+/*
+ * exynos5_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register.
+ */
+static unsigned int exynos5_rate_to_clk(unsigned long rate, u32 *reg)
+{
+ /* EXYNOS5_FSEL_MASK */
+
+ switch (rate) {
+ case 9600 * KHZ:
+ *reg = EXYNOS5_FSEL_9MHZ6;
+ break;
+ case 10 * MHZ:
+ *reg = EXYNOS5_FSEL_10MHZ;
+ break;
+ case 12 * MHZ:
+ *reg = EXYNOS5_FSEL_12MHZ;
+ break;
+ case 19200 * KHZ:
+ *reg = EXYNOS5_FSEL_19MHZ2;
+ break;
+ case 20 * MHZ:
+ *reg = EXYNOS5_FSEL_20MHZ;
+ break;
+ case 24 * MHZ:
+ *reg = EXYNOS5_FSEL_24MHZ;
+ break;
+ case 50 * MHZ:
+ *reg = EXYNOS5_FSEL_50MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
+ unsigned int on)
+{
+ unsigned int val;
+
+ if (!inst->reg_pmu)
+ return;
+
+ val = on ? 0 : EXYNOS4_PHY_ENABLE;
+
+ regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
+ EXYNOS4_PHY_ENABLE, val);
+}
+
+/*
+ * Sets the pipe3 phy's clk as EXTREFCLK (XXTI) which is internal clock
+ * from clock core. Further sets multiplier values and spread spectrum
+ * clock settings for SuperSpeed operations.
+ */
+static unsigned int
+exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
+{
+ u32 reg;
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ /* restore any previous reference clock settings */
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
+
+ /* Use EXTREFCLK as ref clock */
+ reg &= ~PHYCLKRST_REFCLKSEL_MASK;
+ reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK;
+
+ /* FSEL settings corresponding to reference clock */
+ reg &= ~PHYCLKRST_FSEL_PIPE_MASK |
+ PHYCLKRST_MPLL_MULTIPLIER_MASK |
+ PHYCLKRST_SSC_REFCLKSEL_MASK;
+ switch (phy_drd->extrefclk) {
+ case EXYNOS5_FSEL_50MHZ:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x00));
+ break;
+ case EXYNOS5_FSEL_24MHZ:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x88));
+ break;
+ case EXYNOS5_FSEL_20MHZ:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x00));
+ break;
+ case EXYNOS5_FSEL_19MHZ2:
+ reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
+ PHYCLKRST_SSC_REFCLKSEL(0x88));
+ break;
+ default:
+ dev_dbg(phy_drd->dev, "unsupported ref clk\n");
+ break;
+ }
+
+ return reg;
+}
+
+/*
+ * Sets the utmi phy's clk as EXTREFCLK (XXTI) which is internal clock
+ * from clock core. Further sets the FSEL values for HighSpeed operations.
+ */
+static unsigned int
+exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
+{
+ u32 reg;
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ /* restore any previous reference clock settings */
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
+
+ reg &= ~PHYCLKRST_REFCLKSEL_MASK;
+ reg |= PHYCLKRST_REFCLKSEL_EXT_REFCLK;
+
+ reg &= ~PHYCLKRST_FSEL_UTMI_MASK |
+ PHYCLKRST_MPLL_MULTIPLIER_MASK |
+ PHYCLKRST_SSC_REFCLKSEL_MASK;
+ reg |= PHYCLKRST_FSEL(phy_drd->extrefclk);
+
+ return reg;
+}
+
+static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd)
+{
+ u32 reg;
+
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
+ /* Set Tx De-Emphasis level */
+ reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
+ reg |= PHYPARAM1_PCS_TXDEEMPH;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
+
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
+ reg &= ~PHYTEST_POWERDOWN_SSP;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
+}
+
+static void exynos5_usbdrd_utmi_init(struct exynos5_usbdrd_phy *phy_drd)
+{
+ u32 reg;
+
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
+ /* Set Loss-of-Signal Detector sensitivity */
+ reg &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
+ reg |= PHYPARAM0_REF_LOSLEVEL;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
+
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
+ /* Set Tx De-Emphasis level */
+ reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
+ reg |= PHYPARAM1_PCS_TXDEEMPH;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1);
+
+ /* UTMI Power Control */
+ writel(PHYUTMI_OTGDISABLE, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);
+
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
+ reg &= ~PHYTEST_POWERDOWN_HSP;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
+}
+
+static int exynos5_usbdrd_phy_init(struct phy *phy)
+{
+ int ret;
+ u32 reg;
+ struct phy_usb_instance *inst = phy_get_drvdata(phy);
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ ret = clk_prepare_enable(phy_drd->clk);
+ if (ret)
+ return ret;
+
+ /* Reset USB 3.0 PHY */
+ writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
+ writel(0x0, phy_drd->reg_phy + EXYNOS5_DRD_PHYRESUME);
+
+ /*
+ * Setting the Frame length Adj value[6:1] to default 0x20
+ * See xHCI 1.0 spec, 5.2.4
+ */
+ reg = LINKSYSTEM_XHCI_VERSION_CONTROL |
+ LINKSYSTEM_FLADJ(0x20);
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_LINKSYSTEM);
+
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
+ /* Select PHY CLK source */
+ reg &= ~PHYPARAM0_REF_USE_PAD;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM0);
+
+ /* This bit must be set for both HS and SS operations */
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
+ reg |= PHYUTMICLKSEL_UTMI_CLKSEL;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMICLKSEL);
+
+ /* UTMI or PIPE3 specific init */
+ inst->phy_cfg->phy_init(phy_drd);
+
+ /* reference clock settings */
+ reg = inst->phy_cfg->set_refclk(inst);
+
+ /* Digital power supply in normal operating mode */
+ reg |= PHYCLKRST_RETENABLEN |
+ /* Enable ref clock for SS function */
+ PHYCLKRST_REF_SSP_EN |
+ /* Enable spread spectrum */
+ PHYCLKRST_SSC_EN |
+ /* Power down HS Bias and PLL blocks in suspend mode */
+ PHYCLKRST_COMMONONN |
+ /* Reset the port */
+ PHYCLKRST_PORTRESET;
+
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
+
+ udelay(10);
+
+ reg &= ~PHYCLKRST_PORTRESET;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
+
+ clk_disable_unprepare(phy_drd->clk);
+
+ return 0;
+}
+
+static int exynos5_usbdrd_phy_exit(struct phy *phy)
+{
+ int ret;
+ u32 reg;
+ struct phy_usb_instance *inst = phy_get_drvdata(phy);
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ ret = clk_prepare_enable(phy_drd->clk);
+ if (ret)
+ return ret;
+
+ reg = PHYUTMI_OTGDISABLE |
+ PHYUTMI_FORCESUSPEND |
+ PHYUTMI_FORCESLEEP;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYUTMI);
+
+ /* Resetting the PHYCLKRST enable bits to reduce leakage current */
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
+ reg &= ~(PHYCLKRST_REF_SSP_EN |
+ PHYCLKRST_SSC_EN |
+ PHYCLKRST_COMMONONN);
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYCLKRST);
+
+ /* Control PHYTEST to remove leakage current */
+ reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
+ reg |= PHYTEST_POWERDOWN_SSP |
+ PHYTEST_POWERDOWN_HSP;
+ writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
+
+ clk_disable_unprepare(phy_drd->clk);
+
+ return 0;
+}
+
+static int exynos5_usbdrd_phy_power_on(struct phy *phy)
+{
+ int ret;
+ struct phy_usb_instance *inst = phy_get_drvdata(phy);
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ dev_dbg(phy_drd->dev, "Request to power_on usbdrd_phy phy\n");
+
+ clk_prepare_enable(phy_drd->ref_clk);
+ if (!phy_drd->drv_data->has_common_clk_gate) {
+ clk_prepare_enable(phy_drd->pipeclk);
+ clk_prepare_enable(phy_drd->utmiclk);
+ clk_prepare_enable(phy_drd->itpclk);
+ }
+
+ /* Enable VBUS supply */
+ if (phy_drd->vbus_boost) {
+ ret = regulator_enable(phy_drd->vbus_boost);
+ if (ret) {
+ dev_err(phy_drd->dev,
+ "Failed to enable VBUS boost supply\n");
+ goto fail_vbus;
+ }
+ }
+
+ if (phy_drd->vbus) {
+ ret = regulator_enable(phy_drd->vbus);
+ if (ret) {
+ dev_err(phy_drd->dev, "Failed to enable VBUS supply\n");
+ goto fail_vbus_boost;
+ }
+ }
+
+ /* Power-on PHY*/
+ inst->phy_cfg->phy_isol(inst, 0);
+
+ return 0;
+
+fail_vbus_boost:
+ if (phy_drd->vbus_boost)
+ regulator_disable(phy_drd->vbus_boost);
+
+fail_vbus:
+ clk_disable_unprepare(phy_drd->ref_clk);
+ if (!phy_drd->drv_data->has_common_clk_gate) {
+ clk_disable_unprepare(phy_drd->itpclk);
+ clk_disable_unprepare(phy_drd->utmiclk);
+ clk_disable_unprepare(phy_drd->pipeclk);
+ }
+
+ return ret;
+}
+
+static int exynos5_usbdrd_phy_power_off(struct phy *phy)
+{
+ struct phy_usb_instance *inst = phy_get_drvdata(phy);
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ dev_dbg(phy_drd->dev, "Request to power_off usbdrd_phy phy\n");
+
+ /* Power-off the PHY */
+ inst->phy_cfg->phy_isol(inst, 1);
+
+ /* Disable VBUS supply */
+ if (phy_drd->vbus)
+ regulator_disable(phy_drd->vbus);
+ if (phy_drd->vbus_boost)
+ regulator_disable(phy_drd->vbus_boost);
+
+ clk_disable_unprepare(phy_drd->ref_clk);
+ if (!phy_drd->drv_data->has_common_clk_gate) {
+ clk_disable_unprepare(phy_drd->itpclk);
+ clk_disable_unprepare(phy_drd->pipeclk);
+ clk_disable_unprepare(phy_drd->utmiclk);
+ }
+
+ return 0;
+}
+
+static int crport_handshake(struct exynos5_usbdrd_phy *phy_drd,
+ u32 val, u32 cmd)
+{
+ unsigned int result;
+ int err;
+
+ writel(val | cmd, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
+
+ err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1,
+ result, (result & PHYREG1_CR_ACK), 1, 100);
+ if (err == -ETIMEDOUT) {
+ dev_err(phy_drd->dev, "CRPORT handshake timeout1 (0x%08x)\n", val);
+ return err;
+ }
+
+ writel(val, phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
+
+ err = readl_poll_timeout(phy_drd->reg_phy + EXYNOS5_DRD_PHYREG1,
+ result, !(result & PHYREG1_CR_ACK), 1, 100);
+ if (err == -ETIMEDOUT) {
+ dev_err(phy_drd->dev, "CRPORT handshake timeout2 (0x%08x)\n", val);
+ return err;
+ }
+
+ return 0;
+}
+
+static int crport_ctrl_write(struct exynos5_usbdrd_phy *phy_drd,
+ u32 addr, u32 data)
+{
+ int ret;
+
+ /* Write Address */
+ writel(PHYREG0_CR_DATA_IN(addr),
+ phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
+ ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(addr),
+ PHYREG0_CR_CAP_ADDR);
+ if (ret)
+ return ret;
+
+ /* Write Data */
+ writel(PHYREG0_CR_DATA_IN(data),
+ phy_drd->reg_phy + EXYNOS5_DRD_PHYREG0);
+ ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data),
+ PHYREG0_CR_CAP_DATA);
+ if (ret)
+ return ret;
+
+ ret = crport_handshake(phy_drd, PHYREG0_CR_DATA_IN(data),
+ PHYREG0_CR_WRITE);
+
+ return ret;
+}
+
+/*
+ * Calibrate few PHY parameters using CR_PORT register to meet
+ * SuperSpeed requirements on Exynos5420 and Exynos5800 systems,
+ * which have 28nm USB 3.0 DRD PHY.
+ */
+static int exynos5420_usbdrd_phy_calibrate(struct exynos5_usbdrd_phy *phy_drd)
+{
+ unsigned int temp;
+ int ret = 0;
+
+ /*
+ * Change los_bias to (0x5) for 28nm PHY from a
+ * default value (0x0); los_level is set as default
+ * (0x9) as also reflected in los_level[30:26] bits
+ * of PHYPARAM0 register.
+ */
+ temp = LOSLEVEL_OVRD_IN_LOS_BIAS_5420 |
+ LOSLEVEL_OVRD_IN_EN |
+ LOSLEVEL_OVRD_IN_LOS_LEVEL_DEFAULT;
+ ret = crport_ctrl_write(phy_drd,
+ EXYNOS5_DRD_PHYSS_LOSLEVEL_OVRD_IN,
+ temp);
+ if (ret) {
+ dev_err(phy_drd->dev,
+ "Failed setting Loss-of-Signal level for SuperSpeed\n");
+ return ret;
+ }
+
+ /*
+ * Set tx_vboost_lvl to (0x5) for 28nm PHY Tuning,
+ * to raise Tx signal level from its default value of (0x4)
+ */
+ temp = TX_VBOOSTLEVEL_OVRD_IN_VBOOST_5420;
+ ret = crport_ctrl_write(phy_drd,
+ EXYNOS5_DRD_PHYSS_TX_VBOOSTLEVEL_OVRD_IN,
+ temp);
+ if (ret) {
+ dev_err(phy_drd->dev,
+ "Failed setting Tx-Vboost-Level for SuperSpeed\n");
+ return ret;
+ }
+
+ /*
+ * Set proper time to wait for RxDetect measurement, for
+ * desired reference clock of PHY, by tuning the CR_PORT
+ * register LANE0.TX_DEBUG which is internal to PHY.
+ * This fixes issue with few USB 3.0 devices, which are
+ * not detected (not even generate interrupts on the bus
+ * on insertion) without this change.
+ * e.g. Samsung SUM-TSB16S 3.0 USB drive.
+ */
+ switch (phy_drd->extrefclk) {
+ case EXYNOS5_FSEL_50MHZ:
+ temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_48M_50M_52M;
+ break;
+ case EXYNOS5_FSEL_20MHZ:
+ case EXYNOS5_FSEL_19MHZ2:
+ temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_19M2_20M;
+ break;
+ case EXYNOS5_FSEL_24MHZ:
+ default:
+ temp = LANE0_TX_DEBUG_RXDET_MEAS_TIME_24M;
+ break;
+ }
+
+ ret = crport_ctrl_write(phy_drd,
+ EXYNOS5_DRD_PHYSS_LANE0_TX_DEBUG,
+ temp);
+ if (ret)
+ dev_err(phy_drd->dev,
+ "Fail to set RxDet measurement time for SuperSpeed\n");
+
+ return ret;
+}
+
+static struct phy *exynos5_usbdrd_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct exynos5_usbdrd_phy *phy_drd = dev_get_drvdata(dev);
+
+ if (WARN_ON(args->args[0] >= EXYNOS5_DRDPHYS_NUM))
+ return ERR_PTR(-ENODEV);
+
+ return phy_drd->phys[args->args[0]].phy;
+}
+
+static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
+{
+ struct phy_usb_instance *inst = phy_get_drvdata(phy);
+ struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
+
+ if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
+ return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ return 0;
+}
+
+static const struct phy_ops exynos5_usbdrd_phy_ops = {
+ .init = exynos5_usbdrd_phy_init,
+ .exit = exynos5_usbdrd_phy_exit,
+ .power_on = exynos5_usbdrd_phy_power_on,
+ .power_off = exynos5_usbdrd_phy_power_off,
+ .calibrate = exynos5_usbdrd_phy_calibrate,
+ .owner = THIS_MODULE,
+};
+
+static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd)
+{
+ unsigned long ref_rate;
+ int ret;
+
+ phy_drd->clk = devm_clk_get(phy_drd->dev, "phy");
+ if (IS_ERR(phy_drd->clk)) {
+ dev_err(phy_drd->dev, "Failed to get phy clock\n");
+ return PTR_ERR(phy_drd->clk);
+ }
+
+ phy_drd->ref_clk = devm_clk_get(phy_drd->dev, "ref");
+ if (IS_ERR(phy_drd->ref_clk)) {
+ dev_err(phy_drd->dev, "Failed to get phy reference clock\n");
+ return PTR_ERR(phy_drd->ref_clk);
+ }
+ ref_rate = clk_get_rate(phy_drd->ref_clk);
+
+ ret = exynos5_rate_to_clk(ref_rate, &phy_drd->extrefclk);
+ if (ret) {
+ dev_err(phy_drd->dev, "Clock rate (%ld) not supported\n",
+ ref_rate);
+ return ret;
+ }
+
+ if (!phy_drd->drv_data->has_common_clk_gate) {
+ phy_drd->pipeclk = devm_clk_get(phy_drd->dev, "phy_pipe");
+ if (IS_ERR(phy_drd->pipeclk)) {
+ dev_info(phy_drd->dev,
+ "PIPE3 phy operational clock not specified\n");
+ phy_drd->pipeclk = NULL;
+ }
+
+ phy_drd->utmiclk = devm_clk_get(phy_drd->dev, "phy_utmi");
+ if (IS_ERR(phy_drd->utmiclk)) {
+ dev_info(phy_drd->dev,
+ "UTMI phy operational clock not specified\n");
+ phy_drd->utmiclk = NULL;
+ }
+
+ phy_drd->itpclk = devm_clk_get(phy_drd->dev, "itp");
+ if (IS_ERR(phy_drd->itpclk)) {
+ dev_info(phy_drd->dev,
+ "ITP clock from main OSC not specified\n");
+ phy_drd->itpclk = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
+ {
+ .id = EXYNOS5_DRDPHY_UTMI,
+ .phy_isol = exynos5_usbdrd_phy_isol,
+ .phy_init = exynos5_usbdrd_utmi_init,
+ .set_refclk = exynos5_usbdrd_utmi_set_refclk,
+ },
+ {
+ .id = EXYNOS5_DRDPHY_PIPE3,
+ .phy_isol = exynos5_usbdrd_phy_isol,
+ .phy_init = exynos5_usbdrd_pipe3_init,
+ .set_refclk = exynos5_usbdrd_pipe3_set_refclk,
+ },
+};
+
+static const struct exynos5_usbdrd_phy_drvdata exynos5420_usbdrd_phy = {
+ .phy_cfg = phy_cfg_exynos5,
+ .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
+ .pmu_offset_usbdrd1_phy = EXYNOS5420_USBDRD1_PHY_CONTROL,
+ .has_common_clk_gate = true,
+};
+
+static const struct exynos5_usbdrd_phy_drvdata exynos5250_usbdrd_phy = {
+ .phy_cfg = phy_cfg_exynos5,
+ .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
+ .has_common_clk_gate = true,
+};
+
+static const struct exynos5_usbdrd_phy_drvdata exynos5433_usbdrd_phy = {
+ .phy_cfg = phy_cfg_exynos5,
+ .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
+ .pmu_offset_usbdrd1_phy = EXYNOS5433_USBHOST30_PHY_CONTROL,
+ .has_common_clk_gate = false,
+};
+
+static const struct exynos5_usbdrd_phy_drvdata exynos7_usbdrd_phy = {
+ .phy_cfg = phy_cfg_exynos5,
+ .pmu_offset_usbdrd0_phy = EXYNOS5_USBDRD_PHY_CONTROL,
+ .has_common_clk_gate = false,
+};
+
+static const struct of_device_id exynos5_usbdrd_phy_of_match[] = {
+ {
+ .compatible = "samsung,exynos5250-usbdrd-phy",
+ .data = &exynos5250_usbdrd_phy
+ }, {
+ .compatible = "samsung,exynos5420-usbdrd-phy",
+ .data = &exynos5420_usbdrd_phy
+ }, {
+ .compatible = "samsung,exynos5433-usbdrd-phy",
+ .data = &exynos5433_usbdrd_phy
+ }, {
+ .compatible = "samsung,exynos7-usbdrd-phy",
+ .data = &exynos7_usbdrd_phy
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos5_usbdrd_phy_of_match);
+
+static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct exynos5_usbdrd_phy *phy_drd;
+ struct phy_provider *phy_provider;
+ const struct exynos5_usbdrd_phy_drvdata *drv_data;
+ struct regmap *reg_pmu;
+ u32 pmu_offset;
+ int i, ret;
+ int channel;
+
+ phy_drd = devm_kzalloc(dev, sizeof(*phy_drd), GFP_KERNEL);
+ if (!phy_drd)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, phy_drd);
+ phy_drd->dev = dev;
+
+ phy_drd->reg_phy = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(phy_drd->reg_phy))
+ return PTR_ERR(phy_drd->reg_phy);
+
+ drv_data = of_device_get_match_data(dev);
+ if (!drv_data)
+ return -EINVAL;
+
+ phy_drd->drv_data = drv_data;
+
+ ret = exynos5_usbdrd_phy_clk_handle(phy_drd);
+ if (ret) {
+ dev_err(dev, "Failed to initialize clocks\n");
+ return ret;
+ }
+
+ reg_pmu = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,pmu-syscon");
+ if (IS_ERR(reg_pmu)) {
+ dev_err(dev, "Failed to lookup PMU regmap\n");
+ return PTR_ERR(reg_pmu);
+ }
+
+ /*
+ * Exynos5420 SoC has multiple channels for USB 3.0 PHY, with
+ * each having separate power control registers.
+ * 'channel' facilitates to set such registers.
+ */
+ channel = of_alias_get_id(node, "usbdrdphy");
+ if (channel < 0)
+ dev_dbg(dev, "Not a multi-controller usbdrd phy\n");
+
+ switch (channel) {
+ case 1:
+ pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd1_phy;
+ break;
+ case 0:
+ default:
+ pmu_offset = phy_drd->drv_data->pmu_offset_usbdrd0_phy;
+ break;
+ }
+
+ /* Get Vbus regulators */
+ phy_drd->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(phy_drd->vbus)) {
+ ret = PTR_ERR(phy_drd->vbus);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ dev_warn(dev, "Failed to get VBUS supply regulator\n");
+ phy_drd->vbus = NULL;
+ }
+
+ phy_drd->vbus_boost = devm_regulator_get(dev, "vbus-boost");
+ if (IS_ERR(phy_drd->vbus_boost)) {
+ ret = PTR_ERR(phy_drd->vbus_boost);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ dev_warn(dev, "Failed to get VBUS boost supply regulator\n");
+ phy_drd->vbus_boost = NULL;
+ }
+
+ dev_vdbg(dev, "Creating usbdrd_phy phy\n");
+
+ for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) {
+ struct phy *phy = devm_phy_create(dev, NULL,
+ &exynos5_usbdrd_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "Failed to create usbdrd_phy phy\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_drd->phys[i].phy = phy;
+ phy_drd->phys[i].index = i;
+ phy_drd->phys[i].reg_pmu = reg_pmu;
+ phy_drd->phys[i].pmu_offset = pmu_offset;
+ phy_drd->phys[i].phy_cfg = &drv_data->phy_cfg[i];
+ phy_set_drvdata(phy, &phy_drd->phys[i]);
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ exynos5_usbdrd_phy_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(phy_drd->dev, "Failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static struct platform_driver exynos5_usb3drd_phy = {
+ .probe = exynos5_usbdrd_phy_probe,
+ .driver = {
+ .of_match_table = exynos5_usbdrd_phy_of_match,
+ .name = "exynos5_usb3drd_phy",
+ .suppress_bind_attrs = true,
+ }
+};
+
+module_platform_driver(exynos5_usb3drd_phy);
+MODULE_DESCRIPTION("Samsung Exynos5 SoCs USB 3.0 DRD controller PHY driver");
+MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:exynos5_usb3drd_phy");
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
new file mode 100644
index 000000000..595adba5f
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SATA SerDes(PHY) driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Authors: Girish K S <ks.giri@samsung.com>
+ * Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/syscon.h>
+
+#define SATAPHY_CONTROL_OFFSET 0x0724
+#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0)
+#define EXYNOS5_SATA_RESET 0x4
+#define RESET_GLOBAL_RST_N BIT(0)
+#define RESET_CMN_RST_N BIT(1)
+#define RESET_CMN_BLOCK_RST_N BIT(2)
+#define RESET_CMN_I2C_RST_N BIT(3)
+#define RESET_TX_RX_PIPE_RST_N BIT(4)
+#define RESET_TX_RX_BLOCK_RST_N BIT(5)
+#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7))
+#define LINK_RESET 0xf0000
+#define EXYNOS5_SATA_MODE0 0x10
+#define SATA_SPD_GEN3 BIT(1)
+#define EXYNOS5_SATA_CTRL0 0x14
+#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9)
+#define CTRL0_P0_PHY_CALIBRATED BIT(8)
+#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0
+#define PHCTRLM_REF_RATE BIT(1)
+#define PHCTRLM_HIGH_SPEED BIT(0)
+#define EXYNOS5_SATA_PHSATA_STATM 0xf0
+#define PHSTATM_PLL_LOCKED BIT(0)
+
+#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000))
+
+struct exynos_sata_phy {
+ struct phy *phy;
+ struct clk *phyclk;
+ void __iomem *regs;
+ struct regmap *pmureg;
+ struct i2c_client *client;
+};
+
+static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit,
+ u32 status)
+{
+ unsigned long timeout = jiffies + PHY_PLL_TIMEOUT;
+
+ while (time_before(jiffies, timeout)) {
+ if ((readl(base + reg) & checkbit) == status)
+ return 0;
+ }
+
+ return -EFAULT;
+}
+
+static int exynos_sata_phy_power_on(struct phy *phy)
+{
+ struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
+
+ return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
+ EXYNOS5_SATAPHY_PMU_ENABLE, true);
+
+}
+
+static int exynos_sata_phy_power_off(struct phy *phy)
+{
+ struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
+
+ return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
+ EXYNOS5_SATAPHY_PMU_ENABLE, false);
+
+}
+
+static int exynos_sata_phy_init(struct phy *phy)
+{
+ u32 val = 0;
+ int ret = 0;
+ u8 buf[] = { 0x3a, 0x0b };
+ struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
+
+ ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
+ EXYNOS5_SATAPHY_PMU_ENABLE, true);
+ if (ret != 0)
+ dev_err(&sata_phy->phy->dev, "phy init failed\n");
+
+ writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
+ val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N
+ | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N
+ | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
+ val |= LINK_RESET;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
+ val |= RESET_CMN_RST_N;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
+ val &= ~PHCTRLM_REF_RATE;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
+
+ /* High speed enable for Gen3 */
+ val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
+ val |= PHCTRLM_HIGH_SPEED;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0);
+ val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0);
+ val |= SATA_SPD_GEN3;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0);
+
+ ret = i2c_master_send(sata_phy->client, buf, sizeof(buf));
+ if (ret < 0)
+ return ret;
+
+ /* release cmu reset */
+ val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
+ val &= ~RESET_CMN_RST_N;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
+
+ val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
+ val |= RESET_CMN_RST_N;
+ writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
+
+ ret = wait_for_reg_status(sata_phy->regs,
+ EXYNOS5_SATA_PHSATA_STATM,
+ PHSTATM_PLL_LOCKED, 1);
+ if (ret < 0)
+ dev_err(&sata_phy->phy->dev,
+ "PHY PLL locking failed\n");
+ return ret;
+}
+
+static const struct phy_ops exynos_sata_phy_ops = {
+ .init = exynos_sata_phy_init,
+ .power_on = exynos_sata_phy_power_on,
+ .power_off = exynos_sata_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int exynos_sata_phy_probe(struct platform_device *pdev)
+{
+ struct exynos_sata_phy *sata_phy;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct device_node *node;
+ int ret = 0;
+
+ sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL);
+ if (!sata_phy)
+ return -ENOMEM;
+
+ sata_phy->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(sata_phy->regs))
+ return PTR_ERR(sata_phy->regs);
+
+ sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,syscon-phandle");
+ if (IS_ERR(sata_phy->pmureg)) {
+ dev_err(dev, "syscon regmap lookup failed.\n");
+ return PTR_ERR(sata_phy->pmureg);
+ }
+
+ node = of_parse_phandle(dev->of_node,
+ "samsung,exynos-sataphy-i2c-phandle", 0);
+ if (!node)
+ return -EINVAL;
+
+ sata_phy->client = of_find_i2c_device_by_node(node);
+ of_node_put(node);
+ if (!sata_phy->client)
+ return -EPROBE_DEFER;
+
+ dev_set_drvdata(dev, sata_phy);
+
+ sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
+ if (IS_ERR(sata_phy->phyclk)) {
+ dev_err(dev, "failed to get clk for PHY\n");
+ ret = PTR_ERR(sata_phy->phyclk);
+ goto put_dev;
+ }
+
+ ret = clk_prepare_enable(sata_phy->phyclk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable source clk\n");
+ goto put_dev;
+ }
+
+ sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops);
+ if (IS_ERR(sata_phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ ret = PTR_ERR(sata_phy->phy);
+ goto clk_disable;
+ }
+
+ phy_set_drvdata(sata_phy->phy, sata_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ goto clk_disable;
+ }
+
+ return 0;
+
+clk_disable:
+ clk_disable_unprepare(sata_phy->phyclk);
+put_dev:
+ put_device(&sata_phy->client->dev);
+
+ return ret;
+}
+
+static const struct of_device_id exynos_sata_phy_of_match[] = {
+ { .compatible = "samsung,exynos5250-sata-phy" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match);
+
+static struct platform_driver exynos_sata_phy_driver = {
+ .probe = exynos_sata_phy_probe,
+ .driver = {
+ .of_match_table = exynos_sata_phy_of_match,
+ .name = "samsung,sata-phy",
+ .suppress_bind_attrs = true,
+ }
+};
+module_platform_driver(exynos_sata_phy_driver);
+
+MODULE_DESCRIPTION("Samsung SerDes PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>");
+MODULE_AUTHOR("Yuvaraj C D <yuvaraj.cd@samsung.com>");
diff --git a/drivers/phy/samsung/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
new file mode 100644
index 000000000..e198010e1
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos5250-usb2.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@samsung.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include "phy-samsung-usb2.h"
+
+/* Exynos USB PHY registers */
+#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0
+#define EXYNOS_5250_REFCLKSEL_XO 0x1
+#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2
+
+#define EXYNOS_5250_FSEL_9MHZ6 0x0
+#define EXYNOS_5250_FSEL_10MHZ 0x1
+#define EXYNOS_5250_FSEL_12MHZ 0x2
+#define EXYNOS_5250_FSEL_19MHZ2 0x3
+#define EXYNOS_5250_FSEL_20MHZ 0x4
+#define EXYNOS_5250_FSEL_24MHZ 0x5
+#define EXYNOS_5250_FSEL_50MHZ 0x7
+
+/* Normal host */
+#define EXYNOS_5250_HOSTPHYCTRL0 0x0
+
+#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL BIT(31)
+#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19
+#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \
+ (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT)
+#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16
+#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \
+ (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT)
+#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN BIT(11)
+#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE BIT(10)
+#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N BIT(9)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7)
+#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ BIT(6)
+#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP BIT(5)
+#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND BIT(4)
+#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE BIT(3)
+#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST BIT(2)
+#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST BIT(1)
+#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST BIT(0)
+
+/* HSIC0 & HSIC1 */
+#define EXYNOS_5250_HSICPHYCTRL1 0x10
+#define EXYNOS_5250_HSICPHYCTRL2 0x20
+
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK (0x3 << 23)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT (0x2 << 23)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK (0x7f << 16)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 (0x24 << 16)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15 (0x1c << 16)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16 (0x1a << 16)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2 (0x15 << 16)
+#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20 (0x14 << 16)
+#define EXYNOS_5250_HSICPHYCTRLX_SIDDQ BIT(6)
+#define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP BIT(5)
+#define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND BIT(4)
+#define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE BIT(3)
+#define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST BIT(2)
+#define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST BIT(0)
+
+/* EHCI control */
+#define EXYNOS_5250_HOSTEHCICTRL 0x30
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN BIT(29)
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 BIT(28)
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 BIT(27)
+#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 BIT(26)
+#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN BIT(25)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
+ (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \
+ (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \
+ (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1
+#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \
+ (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT)
+#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE BIT(0)
+
+/* OHCI control */
+#define EXYNOS_5250_HOSTOHCICTRL 0x34
+#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1
+#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \
+ (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT)
+#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN BIT(0)
+
+/* USBOTG */
+#define EXYNOS_5250_USBOTGSYS 0x38
+#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET BIT(14)
+#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG BIT(13)
+#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST BIT(12)
+#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9
+#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \
+ (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT)
+#define EXYNOS_5250_USBOTGSYS_ID_PULLUP BIT(8)
+#define EXYNOS_5250_USBOTGSYS_COMMON_ON BIT(7)
+#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4
+#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \
+ (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT)
+#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP BIT(3)
+#define EXYNOS_5250_USBOTGSYS_OTGDISABLE BIT(2)
+#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG BIT(1)
+#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND BIT(0)
+
+/* Isolation, configured in the power management unit */
+#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704
+#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708
+#define EXYNOS_5420_USB_ISOL_HOST_OFFSET 0x70C
+#define EXYNOS_5250_USB_ISOL_ENABLE BIT(0)
+
+/* Mode swtich register */
+#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230
+#define EXYNOS_5250_MODE_SWITCH_MASK 1
+#define EXYNOS_5250_MODE_SWITCH_DEVICE 0
+#define EXYNOS_5250_MODE_SWITCH_HOST 1
+
+enum exynos4x12_phy_id {
+ EXYNOS5250_DEVICE,
+ EXYNOS5250_HOST,
+ EXYNOS5250_HSIC0,
+ EXYNOS5250_HSIC1,
+};
+
+/*
+ * exynos5250_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register.
+ */
+static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg)
+{
+ /* EXYNOS_5250_FSEL_MASK */
+
+ switch (rate) {
+ case 9600 * KHZ:
+ *reg = EXYNOS_5250_FSEL_9MHZ6;
+ break;
+ case 10 * MHZ:
+ *reg = EXYNOS_5250_FSEL_10MHZ;
+ break;
+ case 12 * MHZ:
+ *reg = EXYNOS_5250_FSEL_12MHZ;
+ break;
+ case 19200 * KHZ:
+ *reg = EXYNOS_5250_FSEL_19MHZ2;
+ break;
+ case 20 * MHZ:
+ *reg = EXYNOS_5250_FSEL_20MHZ;
+ break;
+ case 24 * MHZ:
+ *reg = EXYNOS_5250_FSEL_24MHZ;
+ break;
+ case 50 * MHZ:
+ *reg = EXYNOS_5250_FSEL_50MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 offset;
+ u32 mask = EXYNOS_5250_USB_ISOL_ENABLE;
+
+ if (drv->cfg == &exynos5250_usb2_phy_config &&
+ inst->cfg->id == EXYNOS5250_DEVICE)
+ offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET;
+ else if (drv->cfg == &exynos5250_usb2_phy_config &&
+ inst->cfg->id == EXYNOS5250_HOST)
+ offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET;
+ else if (drv->cfg == &exynos5420_usb2_phy_config &&
+ inst->cfg->id == EXYNOS5250_HOST)
+ offset = EXYNOS_5420_USB_ISOL_HOST_OFFSET;
+ else
+ return;
+
+ regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
+}
+
+static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 ctrl0;
+ u32 otg;
+ u32 ehci;
+ u32 ohci;
+ u32 hsic;
+
+ switch (inst->cfg->id) {
+ case EXYNOS5250_DEVICE:
+ regmap_update_bits(drv->reg_sys,
+ EXYNOS_5250_MODE_SWITCH_OFFSET,
+ EXYNOS_5250_MODE_SWITCH_MASK,
+ EXYNOS_5250_MODE_SWITCH_DEVICE);
+
+ /* OTG configuration */
+ otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ /* The clock */
+ otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
+ otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
+ /* Reset */
+ otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
+ EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
+ EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
+ otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_OTGDISABLE;
+ /* Ref clock */
+ otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
+ otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
+ EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
+ writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ udelay(100);
+ otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
+ EXYNOS_5250_USBOTGSYS_OTGDISABLE);
+ writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+
+
+ break;
+ case EXYNOS5250_HOST:
+ case EXYNOS5250_HSIC0:
+ case EXYNOS5250_HSIC1:
+ /* Host registers configuration */
+ ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+ /* The clock */
+ ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK;
+ ctrl0 |= drv->ref_reg_val <<
+ EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT;
+
+ /* Reset */
+ ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL |
+ EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
+ EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
+ EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP);
+ ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N;
+ writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+ udelay(10);
+ ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST);
+ writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+
+ /* OTG configuration */
+ otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ /* The clock */
+ otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK;
+ otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT;
+ /* Reset */
+ otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
+ EXYNOS_5250_USBOTGSYS_FORCE_SLEEP |
+ EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG);
+ otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_OTGDISABLE;
+ /* Ref clock */
+ otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK;
+ otg |= EXYNOS_5250_REFCLKSEL_CLKCORE <<
+ EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT;
+ writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ udelay(10);
+ otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST |
+ EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG |
+ EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET);
+
+ /* HSIC phy configuration */
+ hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 |
+ EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT |
+ EXYNOS_5250_HSICPHYCTRLX_PHYSWRST);
+ writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
+ writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
+ udelay(10);
+ hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST;
+ writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
+ writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
+ /* The following delay is necessary for the reset sequence to be
+ * completed */
+ udelay(80);
+
+ /* Enable EHCI DMA burst */
+ ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
+ ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN |
+ EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 |
+ EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 |
+ EXYNOS_5250_HOSTEHCICTRL_ENAINCR16;
+ writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL);
+
+ /* OHCI settings */
+ ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
+ /* Following code is based on the old driver */
+ ohci |= 0x1 << 3;
+ writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL);
+
+ break;
+ }
+ exynos5250_isol(inst, 0);
+
+ return 0;
+}
+
+static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 ctrl0;
+ u32 otg;
+ u32 hsic;
+
+ exynos5250_isol(inst, 1);
+
+ switch (inst->cfg->id) {
+ case EXYNOS5250_DEVICE:
+ otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND |
+ EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG |
+ EXYNOS_5250_USBOTGSYS_FORCE_SLEEP);
+ writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS);
+ break;
+ case EXYNOS5250_HOST:
+ ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+ ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ |
+ EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND |
+ EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP |
+ EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST |
+ EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL);
+ writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0);
+ break;
+ case EXYNOS5250_HSIC0:
+ case EXYNOS5250_HSIC1:
+ hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 |
+ EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT |
+ EXYNOS_5250_HSICPHYCTRLX_SIDDQ |
+ EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP |
+ EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND
+ );
+ writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1);
+ writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2);
+ break;
+ }
+
+ return 0;
+}
+
+
+static const struct samsung_usb2_common_phy exynos5250_phys[] = {
+ {
+ .label = "device",
+ .id = EXYNOS5250_DEVICE,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "host",
+ .id = EXYNOS5250_HOST,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "hsic0",
+ .id = EXYNOS5250_HSIC0,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "hsic1",
+ .id = EXYNOS5250_HSIC1,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+};
+
+static const struct samsung_usb2_common_phy exynos5420_phys[] = {
+ {
+ .label = "host",
+ .id = EXYNOS5250_HOST,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+ {
+ .label = "hsic",
+ .id = EXYNOS5250_HSIC0,
+ .power_on = exynos5250_power_on,
+ .power_off = exynos5250_power_off,
+ },
+};
+
+const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = {
+ .has_mode_switch = 1,
+ .num_phys = ARRAY_SIZE(exynos5250_phys),
+ .phys = exynos5250_phys,
+ .rate_to_clk = exynos5250_rate_to_clk,
+};
+
+const struct samsung_usb2_phy_config exynos5420_usb2_phy_config = {
+ .has_mode_switch = 1,
+ .num_phys = ARRAY_SIZE(exynos5420_phys),
+ .phys = exynos5420_phys,
+ .rate_to_clk = exynos5250_rate_to_clk,
+};
diff --git a/drivers/phy/samsung/phy-exynos7-ufs.c b/drivers/phy/samsung/phy-exynos7-ufs.c
new file mode 100644
index 000000000..a982e7c12
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos7-ufs.c
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver data for Samsung EXYNOS7 SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ */
+
+#include "phy-samsung-ufs.h"
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
+ /* Setting order: 1st(0x16, 2nd(0x15) */
+ PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
+ PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
+ PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
+ END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = exynos7_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg,
+ [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg,
+};
+
+static const char * const exynos7_ufs_phy_clks[] = {
+ "tx0_symbol_clk", "rx0_symbol_clk", "rx1_symbol_clk", "ref_clk",
+};
+
+const struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
+ .cfgs = exynos7_ufs_phy_cfgs,
+ .isol = {
+ .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
+ .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
+ .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
+ },
+ .clk_list = exynos7_ufs_phy_clks,
+ .num_clks = ARRAY_SIZE(exynos7_ufs_phy_clks),
+ .cdr_lock_status_offset = EXYNOS7_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+};
diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c
new file mode 100644
index 000000000..49e2bcbef
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver data for Samsung EXYNOSAUTO v9 SoC
+ *
+ * Copyright (C) 2021 Samsung Electronics Co., Ltd.
+ */
+
+#include "phy-samsung-ufs.h"
+
+#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL 0x728
+#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
+#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
+#define EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x5e
+
+#define PHY_TRSV_REG_CFG_AUTOV9(o, v, d) \
+ PHY_TRSV_REG_CFG_OFFSET(o, v, d, 0x50)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x023, 0x80, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x01d, 0x10, PWR_MODE_ANY),
+
+ PHY_TRSV_REG_CFG_AUTOV9(0x044, 0xb5, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x43, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x05b, 0x20, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x05e, 0xc0, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x038, 0x12, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x059, 0x58, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x06c, 0x18, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x06d, 0x02, PWR_MODE_ANY),
+
+ PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY),
+
+ PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY),
+
+ END_UFS_PHY_CFG,
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = {
+ PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY),
+
+ PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B),
+ PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B |
+ PWR_MODE_HS_G3_SER_B),
+ PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B),
+
+ END_UFS_PHY_CFG,
+};
+
+static const struct samsung_ufs_phy_cfg *exynosautov9_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = exynosautov9_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = exynosautov9_pre_pwr_hs_cfg,
+};
+
+static const char * const exynosautov9_ufs_phy_clks[] = {
+ "ref_clk",
+};
+
+const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy = {
+ .cfgs = exynosautov9_ufs_phy_cfgs,
+ .isol = {
+ .offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL,
+ .mask = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_MASK,
+ .en = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CTRL_EN,
+ },
+ .clk_list = exynosautov9_ufs_phy_clks,
+ .num_clks = ARRAY_SIZE(exynosautov9_ufs_phy_clks),
+ .cdr_lock_status_offset = EXYNOSAUTOV9_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+};
diff --git a/drivers/phy/samsung/phy-fsd-ufs.c b/drivers/phy/samsung/phy-fsd-ufs.c
new file mode 100644
index 000000000..d36cabd53
--- /dev/null
+++ b/drivers/phy/samsung/phy-fsd-ufs.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver data for FSD SoC
+ *
+ * Copyright (C) 2022 Samsung Electronics Co., Ltd.
+ *
+ */
+#include "phy-samsung-ufs.h"
+
+#define FSD_EMBEDDED_COMBO_PHY_CTRL 0x724
+#define FSD_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
+#define FSD_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
+#define FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS 0x6e
+
+static const struct samsung_ufs_phy_cfg fsd_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg fsd_pre_pwr_hs_cfg[] = {
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg fsd_post_pwr_hs_cfg[] = {
+ END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *fsd_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = fsd_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = fsd_pre_pwr_hs_cfg,
+ [CFG_POST_PWR_HS] = fsd_post_pwr_hs_cfg,
+};
+
+static const char * const fsd_ufs_phy_clks[] = {
+ "ref_clk",
+};
+
+const struct samsung_ufs_phy_drvdata fsd_ufs_phy = {
+ .cfgs = fsd_ufs_phy_cfgs,
+ .isol = {
+ .offset = FSD_EMBEDDED_COMBO_PHY_CTRL,
+ .mask = FSD_EMBEDDED_COMBO_PHY_CTRL_MASK,
+ .en = FSD_EMBEDDED_COMBO_PHY_CTRL_EN,
+ },
+ .clk_list = fsd_ufs_phy_clks,
+ .num_clks = ARRAY_SIZE(fsd_ufs_phy_clks),
+ .cdr_lock_status_offset = FSD_EMBEDDED_COMBO_PHY_CDR_LOCK_STATUS,
+};
diff --git a/drivers/phy/samsung/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
new file mode 100644
index 000000000..32be62e49
--- /dev/null
+++ b/drivers/phy/samsung/phy-s5pv210-usb2.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver - S5PV210 support
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Authors: Kamil Debski <k.debski@samsung.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/phy/phy.h>
+#include "phy-samsung-usb2.h"
+
+/* Exynos USB PHY registers */
+
+/* PHY power control */
+#define S5PV210_UPHYPWR 0x0
+
+#define S5PV210_UPHYPWR_PHY0_SUSPEND BIT(0)
+#define S5PV210_UPHYPWR_PHY0_PWR BIT(3)
+#define S5PV210_UPHYPWR_PHY0_OTG_PWR BIT(4)
+#define S5PV210_UPHYPWR_PHY0 ( \
+ S5PV210_UPHYPWR_PHY0_SUSPEND | \
+ S5PV210_UPHYPWR_PHY0_PWR | \
+ S5PV210_UPHYPWR_PHY0_OTG_PWR)
+
+#define S5PV210_UPHYPWR_PHY1_SUSPEND BIT(6)
+#define S5PV210_UPHYPWR_PHY1_PWR BIT(7)
+#define S5PV210_UPHYPWR_PHY1 ( \
+ S5PV210_UPHYPWR_PHY1_SUSPEND | \
+ S5PV210_UPHYPWR_PHY1_PWR)
+
+/* PHY clock control */
+#define S5PV210_UPHYCLK 0x4
+
+#define S5PV210_UPHYCLK_PHYFSEL_MASK (0x3 << 0)
+#define S5PV210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0)
+#define S5PV210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0)
+#define S5PV210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
+
+#define S5PV210_UPHYCLK_PHY0_ID_PULLUP BIT(2)
+#define S5PV210_UPHYCLK_PHY0_COMMON_ON BIT(4)
+#define S5PV210_UPHYCLK_PHY1_COMMON_ON BIT(7)
+
+/* PHY reset control */
+#define S5PV210_UPHYRST 0x8
+
+#define S5PV210_URSTCON_PHY0 BIT(0)
+#define S5PV210_URSTCON_OTG_HLINK BIT(1)
+#define S5PV210_URSTCON_OTG_PHYLINK BIT(2)
+#define S5PV210_URSTCON_PHY1_ALL BIT(3)
+#define S5PV210_URSTCON_HOST_LINK_ALL BIT(4)
+
+/* Isolation, configured in the power management unit */
+#define S5PV210_USB_ISOL_OFFSET 0x680c
+#define S5PV210_USB_ISOL_DEVICE BIT(0)
+#define S5PV210_USB_ISOL_HOST BIT(1)
+
+
+enum s5pv210_phy_id {
+ S5PV210_DEVICE,
+ S5PV210_HOST,
+ S5PV210_NUM_PHYS,
+};
+
+/*
+ * s5pv210_rate_to_clk() converts the supplied clock rate to the value that
+ * can be written to the phy register.
+ */
+static int s5pv210_rate_to_clk(unsigned long rate, u32 *reg)
+{
+ switch (rate) {
+ case 12 * MHZ:
+ *reg = S5PV210_UPHYCLK_PHYFSEL_12MHZ;
+ break;
+ case 24 * MHZ:
+ *reg = S5PV210_UPHYCLK_PHYFSEL_24MHZ;
+ break;
+ case 48 * MHZ:
+ *reg = S5PV210_UPHYCLK_PHYFSEL_48MHZ;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void s5pv210_isol(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 mask;
+
+ switch (inst->cfg->id) {
+ case S5PV210_DEVICE:
+ mask = S5PV210_USB_ISOL_DEVICE;
+ break;
+ case S5PV210_HOST:
+ mask = S5PV210_USB_ISOL_HOST;
+ break;
+ default:
+ return;
+ }
+
+ regmap_update_bits(drv->reg_pmu, S5PV210_USB_ISOL_OFFSET,
+ mask, on ? 0 : mask);
+}
+
+static void s5pv210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
+{
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ u32 rstbits = 0;
+ u32 phypwr = 0;
+ u32 rst;
+ u32 pwr;
+
+ switch (inst->cfg->id) {
+ case S5PV210_DEVICE:
+ phypwr = S5PV210_UPHYPWR_PHY0;
+ rstbits = S5PV210_URSTCON_PHY0;
+ break;
+ case S5PV210_HOST:
+ phypwr = S5PV210_UPHYPWR_PHY1;
+ rstbits = S5PV210_URSTCON_PHY1_ALL |
+ S5PV210_URSTCON_HOST_LINK_ALL;
+ break;
+ }
+
+ if (on) {
+ writel(drv->ref_reg_val, drv->reg_phy + S5PV210_UPHYCLK);
+
+ pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
+ pwr &= ~phypwr;
+ writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
+
+ rst = readl(drv->reg_phy + S5PV210_UPHYRST);
+ rst |= rstbits;
+ writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+ udelay(10);
+ rst &= ~rstbits;
+ writel(rst, drv->reg_phy + S5PV210_UPHYRST);
+ /* The following delay is necessary for the reset sequence to be
+ * completed
+ */
+ udelay(80);
+ } else {
+ pwr = readl(drv->reg_phy + S5PV210_UPHYPWR);
+ pwr |= phypwr;
+ writel(pwr, drv->reg_phy + S5PV210_UPHYPWR);
+ }
+}
+
+static int s5pv210_power_on(struct samsung_usb2_phy_instance *inst)
+{
+ s5pv210_isol(inst, 0);
+ s5pv210_phy_pwr(inst, 1);
+
+ return 0;
+}
+
+static int s5pv210_power_off(struct samsung_usb2_phy_instance *inst)
+{
+ s5pv210_phy_pwr(inst, 0);
+ s5pv210_isol(inst, 1);
+
+ return 0;
+}
+
+static const struct samsung_usb2_common_phy s5pv210_phys[S5PV210_NUM_PHYS] = {
+ [S5PV210_DEVICE] = {
+ .label = "device",
+ .id = S5PV210_DEVICE,
+ .power_on = s5pv210_power_on,
+ .power_off = s5pv210_power_off,
+ },
+ [S5PV210_HOST] = {
+ .label = "host",
+ .id = S5PV210_HOST,
+ .power_on = s5pv210_power_on,
+ .power_off = s5pv210_power_off,
+ },
+};
+
+const struct samsung_usb2_phy_config s5pv210_usb2_phy_config = {
+ .num_phys = ARRAY_SIZE(s5pv210_phys),
+ .phys = s5pv210_phys,
+ .rate_to_clk = s5pv210_rate_to_clk,
+};
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
new file mode 100644
index 000000000..183c88e3d
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver for Samsung SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-samsung-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+ for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+ for (; (cfg)->id; (cfg)++)
+
+#define PHY_DEF_LANE_CNT 1
+
+static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
+ const struct samsung_ufs_phy_cfg *cfg,
+ u8 lane)
+{
+ enum {LANE_0, LANE_1}; /* lane index */
+
+ switch (lane) {
+ case LANE_0:
+ writel(cfg->val, (phy)->reg_pma + cfg->off_0);
+ break;
+ case LANE_1:
+ if (cfg->id == PHY_TRSV_BLK)
+ writel(cfg->val, (phy)->reg_pma + cfg->off_1);
+ break;
+ }
+}
+
+static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ const unsigned int timeout_us = 100000;
+ const unsigned int sleep_us = 10;
+ u32 val;
+ int err;
+
+ err = readl_poll_timeout(
+ ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
+ val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
+ if (err) {
+ dev_err(ufs_phy->dev,
+ "failed to get phy pll lock acquisition %d\n", err);
+ goto out;
+ }
+
+ err = readl_poll_timeout(
+ ufs_phy->reg_pma +
+ PHY_APB_ADDR(ufs_phy->drvdata->cdr_lock_status_offset),
+ val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
+ if (err)
+ dev_err(ufs_phy->dev,
+ "failed to get phy cdr lock acquisition %d\n", err);
+out:
+ return err;
+}
+
+static int samsung_ufs_phy_calibrate(struct phy *phy)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ const struct samsung_ufs_phy_cfg * const *cfgs = ufs_phy->cfgs;
+ const struct samsung_ufs_phy_cfg *cfg;
+ int err = 0;
+ int i;
+
+ if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
+ ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
+ dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state);
+ return -EINVAL;
+ }
+
+ cfg = cfgs[ufs_phy->ufs_phy_state];
+ if (!cfg)
+ goto out;
+
+ for_each_phy_cfg(cfg) {
+ for_each_phy_lane(ufs_phy, i) {
+ samsung_ufs_phy_config(ufs_phy, cfg, i);
+ }
+ }
+
+ if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
+ err = samsung_ufs_phy_wait_for_lock_acq(phy);
+
+ /**
+ * In Samsung ufshci, PHY need to be calibrated at different
+ * stages / state mainly before Linkstartup, after Linkstartup,
+ * before power mode change and after power mode change.
+ * Below state machine to make sure to calibrate PHY in each
+ * state. Here after configuring PHY in a given state, will
+ * change the state to next state so that next state phy
+ * calibration value can be programed
+ */
+out:
+ switch (ufs_phy->ufs_phy_state) {
+ case CFG_PRE_INIT:
+ ufs_phy->ufs_phy_state = CFG_POST_INIT;
+ break;
+ case CFG_POST_INIT:
+ ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
+ break;
+ case CFG_PRE_PWR_HS:
+ ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
+ break;
+ case CFG_POST_PWR_HS:
+ /* Change back to INIT state */
+ ufs_phy->ufs_phy_state = CFG_PRE_INIT;
+ break;
+ default:
+ dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
+ }
+
+ return err;
+}
+
+static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
+{
+ int i;
+ const struct samsung_ufs_phy_drvdata *drvdata = phy->drvdata;
+ int num_clks = drvdata->num_clks;
+
+ phy->clks = devm_kcalloc(phy->dev, num_clks, sizeof(*phy->clks),
+ GFP_KERNEL);
+ if (!phy->clks)
+ return -ENOMEM;
+
+ for (i = 0; i < num_clks; i++)
+ phy->clks[i].id = drvdata->clk_list[i];
+
+ return devm_clk_bulk_get(phy->dev, num_clks, phy->clks);
+}
+
+static int samsung_ufs_phy_init(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ ss_phy->lane_cnt = phy->attrs.bus_width;
+ ss_phy->ufs_phy_state = CFG_PRE_INIT;
+
+ return 0;
+}
+
+static int samsung_ufs_phy_power_on(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+ int ret;
+
+ samsung_ufs_phy_ctrl_isol(ss_phy, false);
+
+ ret = clk_bulk_prepare_enable(ss_phy->drvdata->num_clks, ss_phy->clks);
+ if (ret) {
+ dev_err(ss_phy->dev, "failed to enable ufs phy clocks\n");
+ return ret;
+ }
+
+ if (ss_phy->ufs_phy_state == CFG_PRE_INIT) {
+ ret = samsung_ufs_phy_calibrate(phy);
+ if (ret)
+ dev_err(ss_phy->dev, "ufs phy calibration failed\n");
+ }
+
+ return ret;
+}
+
+static int samsung_ufs_phy_power_off(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ clk_bulk_disable_unprepare(ss_phy->drvdata->num_clks, ss_phy->clks);
+
+ samsung_ufs_phy_ctrl_isol(ss_phy, true);
+
+ return 0;
+}
+
+static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
+ enum phy_mode mode, int submode)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy);
+
+ ss_phy->mode = PHY_MODE_INVALID;
+
+ if (mode > 0)
+ ss_phy->mode = mode;
+
+ return 0;
+}
+
+static int samsung_ufs_phy_exit(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ ss_phy->ufs_phy_state = CFG_TAG_MAX;
+
+ return 0;
+}
+
+static const struct phy_ops samsung_ufs_phy_ops = {
+ .init = samsung_ufs_phy_init,
+ .exit = samsung_ufs_phy_exit,
+ .power_on = samsung_ufs_phy_power_on,
+ .power_off = samsung_ufs_phy_power_off,
+ .calibrate = samsung_ufs_phy_calibrate,
+ .set_mode = samsung_ufs_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id samsung_ufs_phy_match[];
+
+static int samsung_ufs_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct samsung_ufs_phy *phy;
+ struct phy *gen_phy;
+ struct phy_provider *phy_provider;
+ const struct samsung_ufs_phy_drvdata *drvdata;
+ u32 isol_offset;
+ int err = 0;
+
+ match = of_match_node(samsung_ufs_phy_match, dev->of_node);
+ if (!match) {
+ err = -EINVAL;
+ dev_err(dev, "failed to get match_node\n");
+ goto out;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma");
+ if (IS_ERR(phy->reg_pma)) {
+ err = PTR_ERR(phy->reg_pma);
+ goto out;
+ }
+
+ phy->reg_pmu = syscon_regmap_lookup_by_phandle(
+ dev->of_node, "samsung,pmu-syscon");
+ if (IS_ERR(phy->reg_pmu)) {
+ err = PTR_ERR(phy->reg_pmu);
+ dev_err(dev, "failed syscon remap for pmu\n");
+ goto out;
+ }
+
+ gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
+ if (IS_ERR(gen_phy)) {
+ err = PTR_ERR(gen_phy);
+ dev_err(dev, "failed to create PHY for ufs-phy\n");
+ goto out;
+ }
+
+ drvdata = match->data;
+ phy->dev = dev;
+ phy->drvdata = drvdata;
+ phy->cfgs = drvdata->cfgs;
+ memcpy(&phy->isol, &drvdata->isol, sizeof(phy->isol));
+
+ if (!of_property_read_u32_index(dev->of_node, "samsung,pmu-syscon", 1,
+ &isol_offset))
+ phy->isol.offset = isol_offset;
+
+ phy->lane_cnt = PHY_DEF_LANE_CNT;
+
+ err = samsung_ufs_phy_clks_init(phy);
+ if (err) {
+ dev_err(dev, "failed to get phy clocks\n");
+ goto out;
+ }
+
+ phy_set_drvdata(gen_phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ err = PTR_ERR(phy_provider);
+ dev_err(dev, "failed to register phy-provider\n");
+ goto out;
+ }
+out:
+ return err;
+}
+
+static const struct of_device_id samsung_ufs_phy_match[] = {
+ {
+ .compatible = "samsung,exynos7-ufs-phy",
+ .data = &exynos7_ufs_phy,
+ }, {
+ .compatible = "samsung,exynosautov9-ufs-phy",
+ .data = &exynosautov9_ufs_phy,
+ }, {
+ .compatible = "tesla,fsd-ufs-phy",
+ .data = &fsd_ufs_phy,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
+
+static struct platform_driver samsung_ufs_phy_driver = {
+ .probe = samsung_ufs_phy_probe,
+ .driver = {
+ .name = "samsung-ufs-phy",
+ .of_match_table = samsung_ufs_phy_match,
+ },
+};
+module_platform_driver(samsung_ufs_phy_driver);
+MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
+MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
+MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
new file mode 100644
index 000000000..e122960cf
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#ifndef _PHY_SAMSUNG_UFS_
+#define _PHY_SAMSUNG_UFS_
+
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#define PHY_COMN_BLK 1
+#define PHY_TRSV_BLK 2
+#define END_UFS_PHY_CFG { 0 }
+#define PHY_TRSV_CH_OFFSET 0x30
+#define PHY_APB_ADDR(off) ((off) << 2)
+
+#define PHY_COMN_REG_CFG(o, v, d) { \
+ .off_0 = PHY_APB_ADDR((o)), \
+ .off_1 = 0, \
+ .val = (v), \
+ .desc = (d), \
+ .id = PHY_COMN_BLK, \
+}
+
+#define PHY_TRSV_REG_CFG_OFFSET(o, v, d, c) { \
+ .off_0 = PHY_APB_ADDR((o)), \
+ .off_1 = PHY_APB_ADDR((o) + (c)), \
+ .val = (v), \
+ .desc = (d), \
+ .id = PHY_TRSV_BLK, \
+}
+
+#define PHY_TRSV_REG_CFG(o, v, d) \
+ PHY_TRSV_REG_CFG_OFFSET(o, v, d, PHY_TRSV_CH_OFFSET)
+
+/* UFS PHY registers */
+#define PHY_PLL_LOCK_STATUS 0x1e
+
+#define PHY_PLL_LOCK_BIT BIT(5)
+#define PHY_CDR_LOCK_BIT BIT(4)
+
+/* description for PHY calibration */
+enum {
+ /* applicable to any */
+ PWR_DESC_ANY = 0,
+ /* mode */
+ PWR_DESC_PWM = 1,
+ PWR_DESC_HS = 2,
+ /* series */
+ PWR_DESC_SER_A = 1,
+ PWR_DESC_SER_B = 2,
+ /* gear */
+ PWR_DESC_G1 = 1,
+ PWR_DESC_G2 = 2,
+ PWR_DESC_G3 = 3,
+ /* field mask */
+ MD_MASK = 0x3,
+ SR_MASK = 0x3,
+ GR_MASK = 0x7,
+};
+
+#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY)
+#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY)
+#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY)
+#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B)
+#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\
+ (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
+#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_PWM)
+#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\
+ (((s) & SR_MASK) << 2) | PWR_DESC_HS)
+#define PWR_MODE_HS_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_HS)
+#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_ANY)
+/* PHY calibration point/state */
+enum {
+ CFG_PRE_INIT,
+ CFG_POST_INIT,
+ CFG_PRE_PWR_HS,
+ CFG_POST_PWR_HS,
+ CFG_TAG_MAX,
+};
+
+struct samsung_ufs_phy_cfg {
+ u32 off_0;
+ u32 off_1;
+ u32 val;
+ u8 desc;
+ u8 id;
+};
+
+struct samsung_ufs_phy_pmu_isol {
+ u32 offset;
+ u32 mask;
+ u32 en;
+};
+
+struct samsung_ufs_phy_drvdata {
+ const struct samsung_ufs_phy_cfg **cfgs;
+ struct samsung_ufs_phy_pmu_isol isol;
+ const char * const *clk_list;
+ int num_clks;
+ u32 cdr_lock_status_offset;
+};
+
+struct samsung_ufs_phy {
+ struct device *dev;
+ void __iomem *reg_pma;
+ struct regmap *reg_pmu;
+ struct clk_bulk_data *clks;
+ const struct samsung_ufs_phy_drvdata *drvdata;
+ const struct samsung_ufs_phy_cfg * const *cfgs;
+ struct samsung_ufs_phy_pmu_isol isol;
+ u8 lane_cnt;
+ int ufs_phy_state;
+ enum phy_mode mode;
+};
+
+static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy)
+{
+ return (struct samsung_ufs_phy *)phy_get_drvdata(phy);
+}
+
+static inline void samsung_ufs_phy_ctrl_isol(
+ struct samsung_ufs_phy *phy, u32 isol)
+{
+ regmap_update_bits(phy->reg_pmu, phy->isol.offset,
+ phy->isol.mask, isol ? 0 : phy->isol.en);
+}
+
+extern const struct samsung_ufs_phy_drvdata exynos7_ufs_phy;
+extern const struct samsung_ufs_phy_drvdata exynosautov9_ufs_phy;
+extern const struct samsung_ufs_phy_drvdata fsd_ufs_phy;
+
+#endif /* _PHY_SAMSUNG_UFS_ */
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
new file mode 100644
index 000000000..ec2befabe
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@samsung.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include "phy-samsung-usb2.h"
+
+static int samsung_usb2_phy_power_on(struct phy *phy)
+{
+ struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ int ret;
+
+ dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
+ inst->cfg->label);
+
+ if (drv->vbus) {
+ ret = regulator_enable(drv->vbus);
+ if (ret)
+ goto err_regulator;
+ }
+
+ ret = clk_prepare_enable(drv->clk);
+ if (ret)
+ goto err_main_clk;
+ ret = clk_prepare_enable(drv->ref_clk);
+ if (ret)
+ goto err_instance_clk;
+ if (inst->cfg->power_on) {
+ spin_lock(&drv->lock);
+ ret = inst->cfg->power_on(inst);
+ spin_unlock(&drv->lock);
+ if (ret)
+ goto err_power_on;
+ }
+
+ return 0;
+
+err_power_on:
+ clk_disable_unprepare(drv->ref_clk);
+err_instance_clk:
+ clk_disable_unprepare(drv->clk);
+err_main_clk:
+ if (drv->vbus)
+ regulator_disable(drv->vbus);
+err_regulator:
+ return ret;
+}
+
+static int samsung_usb2_phy_power_off(struct phy *phy)
+{
+ struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
+ struct samsung_usb2_phy_driver *drv = inst->drv;
+ int ret = 0;
+
+ dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
+ inst->cfg->label);
+ if (inst->cfg->power_off) {
+ spin_lock(&drv->lock);
+ ret = inst->cfg->power_off(inst);
+ spin_unlock(&drv->lock);
+ if (ret)
+ return ret;
+ }
+ clk_disable_unprepare(drv->ref_clk);
+ clk_disable_unprepare(drv->clk);
+ if (drv->vbus)
+ ret = regulator_disable(drv->vbus);
+
+ return ret;
+}
+
+static const struct phy_ops samsung_usb2_phy_ops = {
+ .power_on = samsung_usb2_phy_power_on,
+ .power_off = samsung_usb2_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *samsung_usb2_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct samsung_usb2_phy_driver *drv;
+
+ drv = dev_get_drvdata(dev);
+ if (!drv)
+ return ERR_PTR(-EINVAL);
+
+ if (WARN_ON(args->args[0] >= drv->cfg->num_phys))
+ return ERR_PTR(-ENODEV);
+
+ return drv->instances[args->args[0]].phy;
+}
+
+static const struct of_device_id samsung_usb2_phy_of_match[] = {
+#ifdef CONFIG_PHY_EXYNOS4X12_USB2
+ {
+ .compatible = "samsung,exynos3250-usb2-phy",
+ .data = &exynos3250_usb2_phy_config,
+ },
+#endif
+#ifdef CONFIG_PHY_EXYNOS4210_USB2
+ {
+ .compatible = "samsung,exynos4210-usb2-phy",
+ .data = &exynos4210_usb2_phy_config,
+ },
+#endif
+#ifdef CONFIG_PHY_EXYNOS4X12_USB2
+ {
+ .compatible = "samsung,exynos4x12-usb2-phy",
+ .data = &exynos4x12_usb2_phy_config,
+ },
+#endif
+#ifdef CONFIG_PHY_EXYNOS5250_USB2
+ {
+ .compatible = "samsung,exynos5250-usb2-phy",
+ .data = &exynos5250_usb2_phy_config,
+ },
+ {
+ .compatible = "samsung,exynos5420-usb2-phy",
+ .data = &exynos5420_usb2_phy_config,
+ },
+#endif
+#ifdef CONFIG_PHY_S5PV210_USB2
+ {
+ .compatible = "samsung,s5pv210-usb2-phy",
+ .data = &s5pv210_usb2_phy_config,
+ },
+#endif
+ { },
+};
+MODULE_DEVICE_TABLE(of, samsung_usb2_phy_of_match);
+
+static int samsung_usb2_phy_probe(struct platform_device *pdev)
+{
+ const struct samsung_usb2_phy_config *cfg;
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct samsung_usb2_phy_driver *drv;
+ int i, ret;
+
+ if (!pdev->dev.of_node) {
+ dev_err(dev, "This driver is required to be instantiated from device tree\n");
+ return -EINVAL;
+ }
+
+ cfg = of_device_get_match_data(dev);
+ if (!cfg)
+ return -EINVAL;
+
+ drv = devm_kzalloc(dev, struct_size(drv, instances, cfg->num_phys),
+ GFP_KERNEL);
+ if (!drv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, drv);
+ spin_lock_init(&drv->lock);
+
+ drv->cfg = cfg;
+ drv->dev = dev;
+
+ drv->reg_phy = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(drv->reg_phy)) {
+ dev_err(dev, "Failed to map register memory (phy)\n");
+ return PTR_ERR(drv->reg_phy);
+ }
+
+ drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "samsung,pmureg-phandle");
+ if (IS_ERR(drv->reg_pmu)) {
+ dev_err(dev, "Failed to map PMU registers (via syscon)\n");
+ return PTR_ERR(drv->reg_pmu);
+ }
+
+ if (drv->cfg->has_mode_switch) {
+ drv->reg_sys = syscon_regmap_lookup_by_phandle(
+ pdev->dev.of_node, "samsung,sysreg-phandle");
+ if (IS_ERR(drv->reg_sys)) {
+ dev_err(dev, "Failed to map system registers (via syscon)\n");
+ return PTR_ERR(drv->reg_sys);
+ }
+ }
+
+ drv->clk = devm_clk_get(dev, "phy");
+ if (IS_ERR(drv->clk)) {
+ dev_err(dev, "Failed to get clock of phy controller\n");
+ return PTR_ERR(drv->clk);
+ }
+
+ drv->ref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(drv->ref_clk)) {
+ dev_err(dev, "Failed to get reference clock for the phy controller\n");
+ return PTR_ERR(drv->ref_clk);
+ }
+
+ drv->ref_rate = clk_get_rate(drv->ref_clk);
+ if (drv->cfg->rate_to_clk) {
+ ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val);
+ if (ret)
+ return ret;
+ }
+
+ drv->vbus = devm_regulator_get(dev, "vbus");
+ if (IS_ERR(drv->vbus)) {
+ ret = PTR_ERR(drv->vbus);
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ drv->vbus = NULL;
+ }
+
+ for (i = 0; i < drv->cfg->num_phys; i++) {
+ char *label = drv->cfg->phys[i].label;
+ struct samsung_usb2_phy_instance *p = &drv->instances[i];
+
+ dev_dbg(dev, "Creating phy \"%s\"\n", label);
+ p->phy = devm_phy_create(dev, NULL, &samsung_usb2_phy_ops);
+ if (IS_ERR(p->phy)) {
+ dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n",
+ label);
+ return PTR_ERR(p->phy);
+ }
+
+ p->cfg = &drv->cfg->phys[i];
+ p->drv = drv;
+ phy_set_bus_width(p->phy, 8);
+ phy_set_drvdata(p->phy, p);
+ }
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ samsung_usb2_phy_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(drv->dev, "Failed to register phy provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ return 0;
+}
+
+static struct platform_driver samsung_usb2_phy_driver = {
+ .probe = samsung_usb2_phy_probe,
+ .driver = {
+ .of_match_table = samsung_usb2_phy_of_match,
+ .name = "samsung-usb2-phy",
+ .suppress_bind_attrs = true,
+ }
+};
+
+module_platform_driver(samsung_usb2_phy_driver);
+MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver");
+MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:samsung-usb2-phy");
diff --git a/drivers/phy/samsung/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
new file mode 100644
index 000000000..ebaf43bfc
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-usb2.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Samsung SoC USB 1.1/2.0 PHY driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Author: Kamil Debski <k.debski@samsung.com>
+ */
+
+#ifndef _PHY_EXYNOS_USB2_H
+#define _PHY_EXYNOS_USB2_H
+
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/regulator/consumer.h>
+
+#define KHZ 1000
+#define MHZ (KHZ * KHZ)
+
+struct samsung_usb2_phy_driver;
+struct samsung_usb2_phy_instance;
+struct samsung_usb2_phy_config;
+
+struct samsung_usb2_phy_instance {
+ const struct samsung_usb2_common_phy *cfg;
+ struct phy *phy;
+ struct samsung_usb2_phy_driver *drv;
+ int int_cnt;
+ int ext_cnt;
+};
+
+struct samsung_usb2_phy_driver {
+ const struct samsung_usb2_phy_config *cfg;
+ struct clk *clk;
+ struct clk *ref_clk;
+ struct regulator *vbus;
+ unsigned long ref_rate;
+ u32 ref_reg_val;
+ struct device *dev;
+ void __iomem *reg_phy;
+ struct regmap *reg_pmu;
+ struct regmap *reg_sys;
+ spinlock_t lock;
+ struct samsung_usb2_phy_instance instances[];
+};
+
+struct samsung_usb2_common_phy {
+ int (*power_on)(struct samsung_usb2_phy_instance *);
+ int (*power_off)(struct samsung_usb2_phy_instance *);
+ unsigned int id;
+ char *label;
+};
+
+
+struct samsung_usb2_phy_config {
+ const struct samsung_usb2_common_phy *phys;
+ int (*rate_to_clk)(unsigned long, u32 *);
+ unsigned int num_phys;
+ bool has_mode_switch;
+ bool has_refclk_sel;
+};
+
+extern const struct samsung_usb2_phy_config exynos3250_usb2_phy_config;
+extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config;
+extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config;
+extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config;
+extern const struct samsung_usb2_phy_config exynos5420_usb2_phy_config;
+extern const struct samsung_usb2_phy_config s5pv210_usb2_phy_config;
+#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-08 09:27:24 +0000