summaryrefslogtreecommitdiffstats
path: root/drivers/power/supply/ab8500_chargalg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/supply/ab8500_chargalg.c')
-rw-r--r--drivers/power/supply/ab8500_chargalg.c1853
1 files changed, 1853 insertions, 0 deletions
diff --git a/drivers/power/supply/ab8500_chargalg.c b/drivers/power/supply/ab8500_chargalg.c
new file mode 100644
index 000000000..2205ea083
--- /dev/null
+++ b/drivers/power/supply/ab8500_chargalg.c
@@ -0,0 +1,1853 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Copyright (c) 2012 Sony Mobile Communications AB
+ *
+ * Charging algorithm driver for AB8500
+ *
+ * Authors:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Imre Sunyi <imre.sunyi@sonymobile.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/component.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/notifier.h>
+
+#include "ab8500-bm.h"
+#include "ab8500-chargalg.h"
+
+/* Watchdog kick interval */
+#define CHG_WD_INTERVAL (6 * HZ)
+
+/* End-of-charge criteria counter */
+#define EOC_COND_CNT 10
+
+/* One hour expressed in seconds */
+#define ONE_HOUR_IN_SECONDS 3600
+
+/* Five minutes expressed in seconds */
+#define FIVE_MINUTES_IN_SECONDS 300
+
+/*
+ * This is the battery capacity limit that will trigger a new
+ * full charging cycle in the case where maintenance charging
+ * has been disabled
+ */
+#define AB8500_RECHARGE_CAP 95
+
+enum ab8500_chargers {
+ NO_CHG,
+ AC_CHG,
+ USB_CHG,
+};
+
+struct ab8500_chargalg_charger_info {
+ enum ab8500_chargers conn_chg;
+ enum ab8500_chargers prev_conn_chg;
+ enum ab8500_chargers online_chg;
+ enum ab8500_chargers prev_online_chg;
+ enum ab8500_chargers charger_type;
+ bool usb_chg_ok;
+ bool ac_chg_ok;
+ int usb_volt_uv;
+ int usb_curr_ua;
+ int ac_volt_uv;
+ int ac_curr_ua;
+ int usb_vset_uv;
+ int usb_iset_ua;
+ int ac_vset_uv;
+ int ac_iset_ua;
+};
+
+struct ab8500_chargalg_battery_data {
+ int temp;
+ int volt_uv;
+ int avg_curr_ua;
+ int inst_curr_ua;
+ int percent;
+};
+
+enum ab8500_chargalg_states {
+ STATE_HANDHELD_INIT,
+ STATE_HANDHELD,
+ STATE_CHG_NOT_OK_INIT,
+ STATE_CHG_NOT_OK,
+ STATE_HW_TEMP_PROTECT_INIT,
+ STATE_HW_TEMP_PROTECT,
+ STATE_NORMAL_INIT,
+ STATE_NORMAL,
+ STATE_WAIT_FOR_RECHARGE_INIT,
+ STATE_WAIT_FOR_RECHARGE,
+ STATE_MAINTENANCE_A_INIT,
+ STATE_MAINTENANCE_A,
+ STATE_MAINTENANCE_B_INIT,
+ STATE_MAINTENANCE_B,
+ STATE_TEMP_UNDEROVER_INIT,
+ STATE_TEMP_UNDEROVER,
+ STATE_TEMP_LOWHIGH_INIT,
+ STATE_TEMP_LOWHIGH,
+ STATE_OVV_PROTECT_INIT,
+ STATE_OVV_PROTECT,
+ STATE_SAFETY_TIMER_EXPIRED_INIT,
+ STATE_SAFETY_TIMER_EXPIRED,
+ STATE_BATT_REMOVED_INIT,
+ STATE_BATT_REMOVED,
+ STATE_WD_EXPIRED_INIT,
+ STATE_WD_EXPIRED,
+};
+
+static const char * const states[] = {
+ "HANDHELD_INIT",
+ "HANDHELD",
+ "CHG_NOT_OK_INIT",
+ "CHG_NOT_OK",
+ "HW_TEMP_PROTECT_INIT",
+ "HW_TEMP_PROTECT",
+ "NORMAL_INIT",
+ "NORMAL",
+ "WAIT_FOR_RECHARGE_INIT",
+ "WAIT_FOR_RECHARGE",
+ "MAINTENANCE_A_INIT",
+ "MAINTENANCE_A",
+ "MAINTENANCE_B_INIT",
+ "MAINTENANCE_B",
+ "TEMP_UNDEROVER_INIT",
+ "TEMP_UNDEROVER",
+ "TEMP_LOWHIGH_INIT",
+ "TEMP_LOWHIGH",
+ "OVV_PROTECT_INIT",
+ "OVV_PROTECT",
+ "SAFETY_TIMER_EXPIRED_INIT",
+ "SAFETY_TIMER_EXPIRED",
+ "BATT_REMOVED_INIT",
+ "BATT_REMOVED",
+ "WD_EXPIRED_INIT",
+ "WD_EXPIRED",
+};
+
+struct ab8500_chargalg_events {
+ bool batt_unknown;
+ bool mainextchnotok;
+ bool batt_ovv;
+ bool batt_rem;
+ bool btemp_underover;
+ bool btemp_low;
+ bool btemp_high;
+ bool main_thermal_prot;
+ bool usb_thermal_prot;
+ bool main_ovv;
+ bool vbus_ovv;
+ bool usbchargernotok;
+ bool safety_timer_expired;
+ bool maintenance_timer_expired;
+ bool ac_wd_expired;
+ bool usb_wd_expired;
+ bool ac_cv_active;
+ bool usb_cv_active;
+ bool vbus_collapsed;
+};
+
+/**
+ * struct ab8500_charge_curr_maximization - Charger maximization parameters
+ * @original_iset_ua: the non optimized/maximised charger current
+ * @current_iset_ua: the charging current used at this moment
+ * @condition_cnt: number of iterations needed before a new charger current
+ is set
+ * @max_current_ua: maximum charger current
+ * @wait_cnt: to avoid too fast current step down in case of charger
+ * voltage collapse, we insert this delay between step
+ * down
+ * @level: tells in how many steps the charging current has been
+ increased
+ */
+struct ab8500_charge_curr_maximization {
+ int original_iset_ua;
+ int current_iset_ua;
+ int condition_cnt;
+ int max_current_ua;
+ int wait_cnt;
+ u8 level;
+};
+
+enum maxim_ret {
+ MAXIM_RET_NOACTION,
+ MAXIM_RET_CHANGE,
+ MAXIM_RET_IBAT_TOO_HIGH,
+};
+
+/**
+ * struct ab8500_chargalg - ab8500 Charging algorithm device information
+ * @dev: pointer to the structure device
+ * @charge_status: battery operating status
+ * @eoc_cnt: counter used to determine end-of_charge
+ * @maintenance_chg: indicate if maintenance charge is active
+ * @t_hyst_norm temperature hysteresis when the temperature has been
+ * over or under normal limits
+ * @t_hyst_lowhigh temperature hysteresis when the temperature has been
+ * over or under the high or low limits
+ * @charge_state: current state of the charging algorithm
+ * @ccm charging current maximization parameters
+ * @chg_info: information about connected charger types
+ * @batt_data: data of the battery
+ * @bm: Platform specific battery management information
+ * @parent: pointer to the struct ab8500
+ * @chargalg_psy: structure that holds the battery properties exposed by
+ * the charging algorithm
+ * @events: structure for information about events triggered
+ * @chargalg_wq: work queue for running the charging algorithm
+ * @chargalg_periodic_work: work to run the charging algorithm periodically
+ * @chargalg_wd_work: work to kick the charger watchdog periodically
+ * @chargalg_work: work to run the charging algorithm instantly
+ * @safety_timer: charging safety timer
+ * @maintenance_timer: maintenance charging timer
+ * @chargalg_kobject: structure of type kobject
+ */
+struct ab8500_chargalg {
+ struct device *dev;
+ int charge_status;
+ int eoc_cnt;
+ bool maintenance_chg;
+ int t_hyst_norm;
+ int t_hyst_lowhigh;
+ enum ab8500_chargalg_states charge_state;
+ struct ab8500_charge_curr_maximization ccm;
+ struct ab8500_chargalg_charger_info chg_info;
+ struct ab8500_chargalg_battery_data batt_data;
+ struct ab8500 *parent;
+ struct ab8500_bm_data *bm;
+ struct power_supply *chargalg_psy;
+ struct ux500_charger *ac_chg;
+ struct ux500_charger *usb_chg;
+ struct ab8500_chargalg_events events;
+ struct workqueue_struct *chargalg_wq;
+ struct delayed_work chargalg_periodic_work;
+ struct delayed_work chargalg_wd_work;
+ struct work_struct chargalg_work;
+ struct hrtimer safety_timer;
+ struct hrtimer maintenance_timer;
+ struct kobject chargalg_kobject;
+};
+
+/* Main battery properties */
+static enum power_supply_property ab8500_chargalg_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+/**
+ * ab8500_chargalg_safety_timer_expired() - Expiration of the safety timer
+ * @timer: pointer to the hrtimer structure
+ *
+ * This function gets called when the safety timer for the charger
+ * expires
+ */
+static enum hrtimer_restart
+ab8500_chargalg_safety_timer_expired(struct hrtimer *timer)
+{
+ struct ab8500_chargalg *di = container_of(timer, struct ab8500_chargalg,
+ safety_timer);
+ dev_err(di->dev, "Safety timer expired\n");
+ di->events.safety_timer_expired = true;
+
+ /* Trigger execution of the algorithm instantly */
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * ab8500_chargalg_maintenance_timer_expired() - Expiration of
+ * the maintenance timer
+ * @timer: pointer to the timer structure
+ *
+ * This function gets called when the maintenance timer
+ * expires
+ */
+static enum hrtimer_restart
+ab8500_chargalg_maintenance_timer_expired(struct hrtimer *timer)
+{
+
+ struct ab8500_chargalg *di = container_of(timer, struct ab8500_chargalg,
+ maintenance_timer);
+
+ dev_dbg(di->dev, "Maintenance timer expired\n");
+ di->events.maintenance_timer_expired = true;
+
+ /* Trigger execution of the algorithm instantly */
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * ab8500_chargalg_state_to() - Change charge state
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * This function gets called when a charge state change should occur
+ */
+static void ab8500_chargalg_state_to(struct ab8500_chargalg *di,
+ enum ab8500_chargalg_states state)
+{
+ dev_dbg(di->dev,
+ "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n",
+ di->charge_state == state ? "NO" : "YES",
+ di->charge_state,
+ states[di->charge_state],
+ state,
+ states[state]);
+
+ di->charge_state = state;
+}
+
+static int ab8500_chargalg_check_charger_enable(struct ab8500_chargalg *di)
+{
+ struct power_supply_battery_info *bi = di->bm->bi;
+
+ switch (di->charge_state) {
+ case STATE_NORMAL:
+ case STATE_MAINTENANCE_A:
+ case STATE_MAINTENANCE_B:
+ break;
+ default:
+ return 0;
+ }
+
+ if (di->chg_info.charger_type & USB_CHG) {
+ return di->usb_chg->ops.check_enable(di->usb_chg,
+ bi->constant_charge_voltage_max_uv,
+ bi->constant_charge_current_max_ua);
+ } else if (di->chg_info.charger_type & AC_CHG) {
+ return di->ac_chg->ops.check_enable(di->ac_chg,
+ bi->constant_charge_voltage_max_uv,
+ bi->constant_charge_current_max_ua);
+ }
+ return 0;
+}
+
+/**
+ * ab8500_chargalg_check_charger_connection() - Check charger connection change
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * This function will check if there is a change in the charger connection
+ * and change charge state accordingly. AC has precedence over USB.
+ */
+static int ab8500_chargalg_check_charger_connection(struct ab8500_chargalg *di)
+{
+ if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg) {
+ /* Charger state changed since last update */
+ if (di->chg_info.conn_chg & AC_CHG) {
+ dev_info(di->dev, "Charging source is AC\n");
+ if (di->chg_info.charger_type != AC_CHG) {
+ di->chg_info.charger_type = AC_CHG;
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ }
+ } else if (di->chg_info.conn_chg & USB_CHG) {
+ dev_info(di->dev, "Charging source is USB\n");
+ di->chg_info.charger_type = USB_CHG;
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ } else {
+ dev_dbg(di->dev, "Charging source is OFF\n");
+ di->chg_info.charger_type = NO_CHG;
+ ab8500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+ }
+ di->chg_info.prev_conn_chg = di->chg_info.conn_chg;
+ }
+ return di->chg_info.conn_chg;
+}
+
+/**
+ * ab8500_chargalg_start_safety_timer() - Start charging safety timer
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * The safety timer is used to avoid overcharging of old or bad batteries.
+ * There are different timers for AC and USB
+ */
+static void ab8500_chargalg_start_safety_timer(struct ab8500_chargalg *di)
+{
+ /* Charger-dependent expiration time in hours*/
+ int timer_expiration = 0;
+
+ switch (di->chg_info.charger_type) {
+ case AC_CHG:
+ timer_expiration = di->bm->main_safety_tmr_h;
+ break;
+
+ case USB_CHG:
+ timer_expiration = di->bm->usb_safety_tmr_h;
+ break;
+
+ default:
+ dev_err(di->dev, "Unknown charger to charge from\n");
+ break;
+ }
+
+ di->events.safety_timer_expired = false;
+ hrtimer_set_expires_range(&di->safety_timer,
+ ktime_set(timer_expiration * ONE_HOUR_IN_SECONDS, 0),
+ ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
+ hrtimer_start_expires(&di->safety_timer, HRTIMER_MODE_REL);
+}
+
+/**
+ * ab8500_chargalg_stop_safety_timer() - Stop charging safety timer
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * The safety timer is stopped whenever the NORMAL state is exited
+ */
+static void ab8500_chargalg_stop_safety_timer(struct ab8500_chargalg *di)
+{
+ if (hrtimer_try_to_cancel(&di->safety_timer) >= 0)
+ di->events.safety_timer_expired = false;
+}
+
+/**
+ * ab8500_chargalg_start_maintenance_timer() - Start charging maintenance timer
+ * @di: pointer to the ab8500_chargalg structure
+ * @duration: duration of the maintenance timer in minutes
+ *
+ * The maintenance timer is used to maintain the charge in the battery once
+ * the battery is considered full. These timers are chosen to match the
+ * discharge curve of the battery
+ */
+static void ab8500_chargalg_start_maintenance_timer(struct ab8500_chargalg *di,
+ int duration)
+{
+ /* Set a timer in minutes with a 30 second range */
+ hrtimer_set_expires_range(&di->maintenance_timer,
+ ktime_set(duration * 60, 0),
+ ktime_set(30, 0));
+ di->events.maintenance_timer_expired = false;
+ hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL);
+}
+
+/**
+ * ab8500_chargalg_stop_maintenance_timer() - Stop maintenance timer
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * The maintenance timer is stopped whenever maintenance ends or when another
+ * state is entered
+ */
+static void ab8500_chargalg_stop_maintenance_timer(struct ab8500_chargalg *di)
+{
+ if (hrtimer_try_to_cancel(&di->maintenance_timer) >= 0)
+ di->events.maintenance_timer_expired = false;
+}
+
+/**
+ * ab8500_chargalg_kick_watchdog() - Kick charger watchdog
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * The charger watchdog have to be kicked periodically whenever the charger is
+ * on, else the ABB will reset the system
+ */
+static int ab8500_chargalg_kick_watchdog(struct ab8500_chargalg *di)
+{
+ /* Check if charger exists and kick watchdog if charging */
+ if (di->ac_chg && di->ac_chg->ops.kick_wd &&
+ di->chg_info.online_chg & AC_CHG) {
+ return di->ac_chg->ops.kick_wd(di->ac_chg);
+ } else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
+ di->chg_info.online_chg & USB_CHG)
+ return di->usb_chg->ops.kick_wd(di->usb_chg);
+
+ return -ENXIO;
+}
+
+/**
+ * ab8500_chargalg_ac_en() - Turn on/off the AC charger
+ * @di: pointer to the ab8500_chargalg structure
+ * @enable: charger on/off
+ * @vset_uv: requested charger output voltage in microvolt
+ * @iset_ua: requested charger output current in microampere
+ *
+ * The AC charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int ab8500_chargalg_ac_en(struct ab8500_chargalg *di, int enable,
+ int vset_uv, int iset_ua)
+{
+ if (!di->ac_chg || !di->ac_chg->ops.enable)
+ return -ENXIO;
+
+ /* Select maximum of what both the charger and the battery supports */
+ if (di->ac_chg->max_out_volt_uv)
+ vset_uv = min(vset_uv, di->ac_chg->max_out_volt_uv);
+ if (di->ac_chg->max_out_curr_ua)
+ iset_ua = min(iset_ua, di->ac_chg->max_out_curr_ua);
+
+ di->chg_info.ac_iset_ua = iset_ua;
+ di->chg_info.ac_vset_uv = vset_uv;
+
+ return di->ac_chg->ops.enable(di->ac_chg, enable, vset_uv, iset_ua);
+}
+
+/**
+ * ab8500_chargalg_usb_en() - Turn on/off the USB charger
+ * @di: pointer to the ab8500_chargalg structure
+ * @enable: charger on/off
+ * @vset_uv: requested charger output voltage in microvolt
+ * @iset_ua: requested charger output current in microampere
+ *
+ * The USB charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int ab8500_chargalg_usb_en(struct ab8500_chargalg *di, int enable,
+ int vset_uv, int iset_ua)
+{
+ if (!di->usb_chg || !di->usb_chg->ops.enable)
+ return -ENXIO;
+
+ /* Select maximum of what both the charger and the battery supports */
+ if (di->usb_chg->max_out_volt_uv)
+ vset_uv = min(vset_uv, di->usb_chg->max_out_volt_uv);
+ if (di->usb_chg->max_out_curr_ua)
+ iset_ua = min(iset_ua, di->usb_chg->max_out_curr_ua);
+
+ di->chg_info.usb_iset_ua = iset_ua;
+ di->chg_info.usb_vset_uv = vset_uv;
+
+ return di->usb_chg->ops.enable(di->usb_chg, enable, vset_uv, iset_ua);
+}
+
+/**
+ * ab8500_chargalg_update_chg_curr() - Update charger current
+ * @di: pointer to the ab8500_chargalg structure
+ * @iset_ua: requested charger output current in microampere
+ *
+ * The charger output current will be updated for the charger
+ * that is currently in use
+ */
+static int ab8500_chargalg_update_chg_curr(struct ab8500_chargalg *di,
+ int iset_ua)
+{
+ /* Check if charger exists and update current if charging */
+ if (di->ac_chg && di->ac_chg->ops.update_curr &&
+ di->chg_info.charger_type & AC_CHG) {
+ /*
+ * Select maximum of what both the charger
+ * and the battery supports
+ */
+ if (di->ac_chg->max_out_curr_ua)
+ iset_ua = min(iset_ua, di->ac_chg->max_out_curr_ua);
+
+ di->chg_info.ac_iset_ua = iset_ua;
+
+ return di->ac_chg->ops.update_curr(di->ac_chg, iset_ua);
+ } else if (di->usb_chg && di->usb_chg->ops.update_curr &&
+ di->chg_info.charger_type & USB_CHG) {
+ /*
+ * Select maximum of what both the charger
+ * and the battery supports
+ */
+ if (di->usb_chg->max_out_curr_ua)
+ iset_ua = min(iset_ua, di->usb_chg->max_out_curr_ua);
+
+ di->chg_info.usb_iset_ua = iset_ua;
+
+ return di->usb_chg->ops.update_curr(di->usb_chg, iset_ua);
+ }
+
+ return -ENXIO;
+}
+
+/**
+ * ab8500_chargalg_stop_charging() - Stop charging
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * This function is called from any state where charging should be stopped.
+ * All charging is disabled and all status parameters and timers are changed
+ * accordingly
+ */
+static void ab8500_chargalg_stop_charging(struct ab8500_chargalg *di)
+{
+ ab8500_chargalg_ac_en(di, false, 0, 0);
+ ab8500_chargalg_usb_en(di, false, 0, 0);
+ ab8500_chargalg_stop_safety_timer(di);
+ ab8500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ di->maintenance_chg = false;
+ cancel_delayed_work(&di->chargalg_wd_work);
+ power_supply_changed(di->chargalg_psy);
+}
+
+/**
+ * ab8500_chargalg_hold_charging() - Pauses charging
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * This function is called in the case where maintenance charging has been
+ * disabled and instead a battery voltage mode is entered to check when the
+ * battery voltage has reached a certain recharge voltage
+ */
+static void ab8500_chargalg_hold_charging(struct ab8500_chargalg *di)
+{
+ ab8500_chargalg_ac_en(di, false, 0, 0);
+ ab8500_chargalg_usb_en(di, false, 0, 0);
+ ab8500_chargalg_stop_safety_timer(di);
+ ab8500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ di->maintenance_chg = false;
+ cancel_delayed_work(&di->chargalg_wd_work);
+ power_supply_changed(di->chargalg_psy);
+}
+
+/**
+ * ab8500_chargalg_start_charging() - Start the charger
+ * @di: pointer to the ab8500_chargalg structure
+ * @vset_uv: requested charger output voltage in microvolt
+ * @iset_ua: requested charger output current in microampere
+ *
+ * A charger will be enabled depending on the requested charger type that was
+ * detected previously.
+ */
+static void ab8500_chargalg_start_charging(struct ab8500_chargalg *di,
+ int vset_uv, int iset_ua)
+{
+ switch (di->chg_info.charger_type) {
+ case AC_CHG:
+ dev_dbg(di->dev,
+ "AC parameters: Vset %d, Ich %d\n", vset_uv, iset_ua);
+ ab8500_chargalg_usb_en(di, false, 0, 0);
+ ab8500_chargalg_ac_en(di, true, vset_uv, iset_ua);
+ break;
+
+ case USB_CHG:
+ dev_dbg(di->dev,
+ "USB parameters: Vset %d, Ich %d\n", vset_uv, iset_ua);
+ ab8500_chargalg_ac_en(di, false, 0, 0);
+ ab8500_chargalg_usb_en(di, true, vset_uv, iset_ua);
+ break;
+
+ default:
+ dev_err(di->dev, "Unknown charger to charge from\n");
+ break;
+ }
+}
+
+/**
+ * ab8500_chargalg_check_temp() - Check battery temperature ranges
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * The battery temperature is checked against the predefined limits and the
+ * charge state is changed accordingly
+ */
+static void ab8500_chargalg_check_temp(struct ab8500_chargalg *di)
+{
+ struct power_supply_battery_info *bi = di->bm->bi;
+
+ if (di->batt_data.temp > (bi->temp_alert_min + di->t_hyst_norm) &&
+ di->batt_data.temp < (bi->temp_alert_max - di->t_hyst_norm)) {
+ /* Temp OK! */
+ di->events.btemp_underover = false;
+ di->events.btemp_low = false;
+ di->events.btemp_high = false;
+ di->t_hyst_norm = 0;
+ di->t_hyst_lowhigh = 0;
+ } else {
+ if ((di->batt_data.temp >= bi->temp_alert_max) &&
+ (di->batt_data.temp < (bi->temp_max - di->t_hyst_lowhigh))) {
+ /* Alert zone for high temperature */
+ di->events.btemp_underover = false;
+ di->events.btemp_high = true;
+ di->t_hyst_norm = di->bm->temp_hysteresis;
+ di->t_hyst_lowhigh = 0;
+ } else if ((di->batt_data.temp > (bi->temp_min + di->t_hyst_lowhigh)) &&
+ (di->batt_data.temp <= bi->temp_alert_min)) {
+ /* Alert zone for low temperature */
+ di->events.btemp_underover = false;
+ di->events.btemp_low = true;
+ di->t_hyst_norm = di->bm->temp_hysteresis;
+ di->t_hyst_lowhigh = 0;
+ } else if (di->batt_data.temp <= bi->temp_min ||
+ di->batt_data.temp >= bi->temp_max) {
+ /* TEMP major!!!!! */
+ di->events.btemp_underover = true;
+ di->events.btemp_low = false;
+ di->events.btemp_high = false;
+ di->t_hyst_norm = 0;
+ di->t_hyst_lowhigh = di->bm->temp_hysteresis;
+ } else {
+ /* Within hysteresis */
+ dev_dbg(di->dev, "Within hysteresis limit temp: %d "
+ "hyst_lowhigh %d, hyst normal %d\n",
+ di->batt_data.temp, di->t_hyst_lowhigh,
+ di->t_hyst_norm);
+ }
+ }
+}
+
+/**
+ * ab8500_chargalg_check_charger_voltage() - Check charger voltage
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * Charger voltage is checked against maximum limit
+ */
+static void ab8500_chargalg_check_charger_voltage(struct ab8500_chargalg *di)
+{
+ if (di->chg_info.usb_volt_uv > di->bm->chg_params->usb_volt_max_uv)
+ di->chg_info.usb_chg_ok = false;
+ else
+ di->chg_info.usb_chg_ok = true;
+
+ if (di->chg_info.ac_volt_uv > di->bm->chg_params->ac_volt_max_uv)
+ di->chg_info.ac_chg_ok = false;
+ else
+ di->chg_info.ac_chg_ok = true;
+
+}
+
+/**
+ * ab8500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * End-of-charge criteria is fulfilled when the battery voltage is above a
+ * certain limit and the battery current is below a certain limit for a
+ * predefined number of consecutive seconds. If true, the battery is full
+ */
+static void ab8500_chargalg_end_of_charge(struct ab8500_chargalg *di)
+{
+ if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
+ di->charge_state == STATE_NORMAL &&
+ !di->maintenance_chg && (di->batt_data.volt_uv >=
+ di->bm->bi->voltage_max_design_uv ||
+ di->events.usb_cv_active || di->events.ac_cv_active) &&
+ di->batt_data.avg_curr_ua <
+ di->bm->bi->charge_term_current_ua &&
+ di->batt_data.avg_curr_ua > 0) {
+ if (++di->eoc_cnt >= EOC_COND_CNT) {
+ di->eoc_cnt = 0;
+ di->charge_status = POWER_SUPPLY_STATUS_FULL;
+ di->maintenance_chg = true;
+ dev_dbg(di->dev, "EOC reached!\n");
+ power_supply_changed(di->chargalg_psy);
+ } else {
+ dev_dbg(di->dev,
+ " EOC limit reached for the %d"
+ " time, out of %d before EOC\n",
+ di->eoc_cnt,
+ EOC_COND_CNT);
+ }
+ } else {
+ di->eoc_cnt = 0;
+ }
+}
+
+static void init_maxim_chg_curr(struct ab8500_chargalg *di)
+{
+ struct power_supply_battery_info *bi = di->bm->bi;
+
+ di->ccm.original_iset_ua = bi->constant_charge_current_max_ua;
+ di->ccm.current_iset_ua = bi->constant_charge_current_max_ua;
+ di->ccm.max_current_ua = di->bm->maxi->chg_curr_ua;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.level = 0;
+}
+
+/**
+ * ab8500_chargalg_chg_curr_maxim - increases the charger current to
+ * compensate for the system load
+ * @di pointer to the ab8500_chargalg structure
+ *
+ * This maximization function is used to raise the charger current to get the
+ * battery current as close to the optimal value as possible. The battery
+ * current during charging is affected by the system load
+ */
+static enum maxim_ret ab8500_chargalg_chg_curr_maxim(struct ab8500_chargalg *di)
+{
+
+ if (!di->bm->maxi->ena_maxi)
+ return MAXIM_RET_NOACTION;
+
+ if (di->events.vbus_collapsed) {
+ dev_dbg(di->dev, "Charger voltage has collapsed %d\n",
+ di->ccm.wait_cnt);
+ if (di->ccm.wait_cnt == 0) {
+ dev_dbg(di->dev, "lowering current\n");
+ di->ccm.wait_cnt++;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.max_current_ua = di->ccm.current_iset_ua;
+ di->ccm.current_iset_ua = di->ccm.max_current_ua;
+ di->ccm.level--;
+ return MAXIM_RET_CHANGE;
+ } else {
+ dev_dbg(di->dev, "waiting\n");
+ /* Let's go in here twice before lowering curr again */
+ di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3;
+ return MAXIM_RET_NOACTION;
+ }
+ }
+
+ di->ccm.wait_cnt = 0;
+
+ if (di->batt_data.inst_curr_ua > di->ccm.original_iset_ua) {
+ dev_dbg(di->dev, " Maximization Ibat (%duA) too high"
+ " (limit %duA) (current iset: %duA)!\n",
+ di->batt_data.inst_curr_ua, di->ccm.original_iset_ua,
+ di->ccm.current_iset_ua);
+
+ if (di->ccm.current_iset_ua == di->ccm.original_iset_ua)
+ return MAXIM_RET_NOACTION;
+
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.current_iset_ua = di->ccm.original_iset_ua;
+ di->ccm.level = 0;
+
+ return MAXIM_RET_IBAT_TOO_HIGH;
+ }
+
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ return MAXIM_RET_NOACTION;
+}
+
+static void handle_maxim_chg_curr(struct ab8500_chargalg *di)
+{
+ struct power_supply_battery_info *bi = di->bm->bi;
+ enum maxim_ret ret;
+ int result;
+
+ ret = ab8500_chargalg_chg_curr_maxim(di);
+ switch (ret) {
+ case MAXIM_RET_CHANGE:
+ result = ab8500_chargalg_update_chg_curr(di,
+ di->ccm.current_iset_ua);
+ if (result)
+ dev_err(di->dev, "failed to set chg curr\n");
+ break;
+ case MAXIM_RET_IBAT_TOO_HIGH:
+ result = ab8500_chargalg_update_chg_curr(di,
+ bi->constant_charge_current_max_ua);
+ if (result)
+ dev_err(di->dev, "failed to set chg curr\n");
+ break;
+
+ case MAXIM_RET_NOACTION:
+ default:
+ /* Do nothing..*/
+ break;
+ }
+}
+
+static int ab8500_chargalg_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext = dev_get_drvdata(dev);
+ const char **supplicants = (const char **)ext->supplied_to;
+ struct ab8500_chargalg *di;
+ union power_supply_propval ret;
+ int j;
+ bool capacity_updated = false;
+
+ psy = (struct power_supply *)data;
+ di = power_supply_get_drvdata(psy);
+ /* For all psy where the driver name appears in any supplied_to */
+ j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ if (j < 0)
+ return 0;
+
+ /*
+ * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its
+ * property because of handling that sysfs entry on its own, this is
+ * the place to get the battery capacity.
+ */
+ if (!power_supply_get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) {
+ di->batt_data.percent = ret.intval;
+ capacity_updated = true;
+ }
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->desc->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->desc->properties[j];
+
+ /*
+ * Initialize chargers if not already done.
+ * The ab8500_charger*/
+ if (!di->ac_chg &&
+ ext->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ di->ac_chg = psy_to_ux500_charger(ext);
+ else if (!di->usb_chg &&
+ ext->desc->type == POWER_SUPPLY_TYPE_USB)
+ di->usb_chg = psy_to_ux500_charger(ext);
+
+ if (power_supply_get_property(ext, prop, &ret))
+ continue;
+ switch (prop) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ /* Battery present */
+ if (ret.intval)
+ di->events.batt_rem = false;
+ /* Battery removed */
+ else
+ di->events.batt_rem = true;
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AC disconnected */
+ if (!ret.intval &&
+ (di->chg_info.conn_chg & AC_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg &= ~AC_CHG;
+ }
+ /* AC connected */
+ else if (ret.intval &&
+ !(di->chg_info.conn_chg & AC_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg |= AC_CHG;
+ }
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* USB disconnected */
+ if (!ret.intval &&
+ (di->chg_info.conn_chg & USB_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg &= ~USB_CHG;
+ }
+ /* USB connected */
+ else if (ret.intval &&
+ !(di->chg_info.conn_chg & USB_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg |= USB_CHG;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AC offline */
+ if (!ret.intval &&
+ (di->chg_info.online_chg & AC_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg &= ~AC_CHG;
+ }
+ /* AC online */
+ else if (ret.intval &&
+ !(di->chg_info.online_chg & AC_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg |= AC_CHG;
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_wd_work, 0);
+ }
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* USB offline */
+ if (!ret.intval &&
+ (di->chg_info.online_chg & USB_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg &= ~USB_CHG;
+ }
+ /* USB online */
+ else if (ret.intval &&
+ !(di->chg_info.online_chg & USB_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg |= USB_CHG;
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_wd_work, 0);
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ switch (ret.intval) {
+ case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+ di->events.mainextchnotok = true;
+ di->events.main_thermal_prot = false;
+ di->events.main_ovv = false;
+ di->events.ac_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_DEAD:
+ di->events.ac_wd_expired = true;
+ di->events.mainextchnotok = false;
+ di->events.main_ovv = false;
+ di->events.main_thermal_prot = false;
+ break;
+ case POWER_SUPPLY_HEALTH_COLD:
+ case POWER_SUPPLY_HEALTH_OVERHEAT:
+ di->events.main_thermal_prot = true;
+ di->events.mainextchnotok = false;
+ di->events.main_ovv = false;
+ di->events.ac_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+ di->events.main_ovv = true;
+ di->events.mainextchnotok = false;
+ di->events.main_thermal_prot = false;
+ di->events.ac_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_GOOD:
+ di->events.main_thermal_prot = false;
+ di->events.mainextchnotok = false;
+ di->events.main_ovv = false;
+ di->events.ac_wd_expired = false;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_TYPE_USB:
+ switch (ret.intval) {
+ case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+ di->events.usbchargernotok = true;
+ di->events.usb_thermal_prot = false;
+ di->events.vbus_ovv = false;
+ di->events.usb_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_DEAD:
+ di->events.usb_wd_expired = true;
+ di->events.usbchargernotok = false;
+ di->events.usb_thermal_prot = false;
+ di->events.vbus_ovv = false;
+ break;
+ case POWER_SUPPLY_HEALTH_COLD:
+ case POWER_SUPPLY_HEALTH_OVERHEAT:
+ di->events.usb_thermal_prot = true;
+ di->events.usbchargernotok = false;
+ di->events.vbus_ovv = false;
+ di->events.usb_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+ di->events.vbus_ovv = true;
+ di->events.usbchargernotok = false;
+ di->events.usb_thermal_prot = false;
+ di->events.usb_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_GOOD:
+ di->events.usbchargernotok = false;
+ di->events.usb_thermal_prot = false;
+ di->events.vbus_ovv = false;
+ di->events.usb_wd_expired = false;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->batt_data.volt_uv = ret.intval;
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ di->chg_info.ac_volt_uv = ret.intval;
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ di->chg_info.usb_volt_uv = ret.intval;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AVG is used to indicate when we are
+ * in CV mode */
+ if (ret.intval)
+ di->events.ac_cv_active = true;
+ else
+ di->events.ac_cv_active = false;
+
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* AVG is used to indicate when we are
+ * in CV mode */
+ if (ret.intval)
+ di->events.usb_cv_active = true;
+ else
+ di->events.usb_cv_active = false;
+
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ if (ret.intval)
+ di->events.batt_unknown = false;
+ else
+ di->events.batt_unknown = true;
+
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ di->batt_data.temp = ret.intval / 10;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_MAINS:
+ di->chg_info.ac_curr_ua = ret.intval;
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ di->chg_info.usb_curr_ua = ret.intval;
+ break;
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->batt_data.inst_curr_ua = ret.intval;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->batt_data.avg_curr_ua = ret.intval;
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ if (ret.intval)
+ di->events.vbus_collapsed = true;
+ else
+ di->events.vbus_collapsed = false;
+ break;
+ default:
+ break;
+ }
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (!capacity_updated)
+ di->batt_data.percent = ret.intval;
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * ab8500_chargalg_external_power_changed() - callback for power supply changes
+ * @psy: pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void ab8500_chargalg_external_power_changed(struct power_supply *psy)
+{
+ struct ab8500_chargalg *di = power_supply_get_drvdata(psy);
+
+ /*
+ * Trigger execution of the algorithm instantly and read
+ * all power_supply properties there instead
+ */
+ if (di->chargalg_wq)
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * ab8500_chargalg_time_to_restart() - time to restart CC/CV charging?
+ * @di: charging algorithm state
+ *
+ * This checks if the voltage or capacity of the battery has fallen so
+ * low that we need to restart the CC/CV charge cycle.
+ */
+static bool ab8500_chargalg_time_to_restart(struct ab8500_chargalg *di)
+{
+ struct power_supply_battery_info *bi = di->bm->bi;
+
+ /* Sanity check - these need to have some reasonable values */
+ if (!di->batt_data.volt_uv || !di->batt_data.percent)
+ return false;
+
+ /* Some batteries tell us at which voltage we should restart charging */
+ if (bi->charge_restart_voltage_uv > 0) {
+ if (di->batt_data.volt_uv <= bi->charge_restart_voltage_uv)
+ return true;
+ /* Else we restart as we reach a certain capacity */
+ } else {
+ if (di->batt_data.percent <= AB8500_RECHARGE_CAP)
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * ab8500_chargalg_algorithm() - Main function for the algorithm
+ * @di: pointer to the ab8500_chargalg structure
+ *
+ * This is the main control function for the charging algorithm.
+ * It is called periodically or when something happens that will
+ * trigger a state change
+ */
+static void ab8500_chargalg_algorithm(struct ab8500_chargalg *di)
+{
+ struct power_supply_battery_info *bi = di->bm->bi;
+ struct power_supply_maintenance_charge_table *mt;
+ int charger_status;
+ int ret;
+
+ /* Collect data from all power_supply class devices */
+ class_for_each_device(power_supply_class, NULL,
+ di->chargalg_psy, ab8500_chargalg_get_ext_psy_data);
+
+ ab8500_chargalg_end_of_charge(di);
+ ab8500_chargalg_check_temp(di);
+ ab8500_chargalg_check_charger_voltage(di);
+
+ charger_status = ab8500_chargalg_check_charger_connection(di);
+
+ if (is_ab8500(di->parent)) {
+ ret = ab8500_chargalg_check_charger_enable(di);
+ if (ret < 0)
+ dev_err(di->dev, "Checking charger is enabled error"
+ ": Returned Value %d\n", ret);
+ }
+
+ /*
+ * First check if we have a charger connected.
+ * Also we don't allow charging of unknown batteries if configured
+ * this way
+ */
+ if (!charger_status ||
+ (di->events.batt_unknown && !di->bm->chg_unknown_bat)) {
+ if (di->charge_state != STATE_HANDHELD) {
+ di->events.safety_timer_expired = false;
+ ab8500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+ }
+ }
+
+ /* Safety timer expiration */
+ else if (di->events.safety_timer_expired) {
+ if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED)
+ ab8500_chargalg_state_to(di,
+ STATE_SAFETY_TIMER_EXPIRED_INIT);
+ }
+ /*
+ * Check if any interrupts has occurred
+ * that will prevent us from charging
+ */
+
+ /* Battery removed */
+ else if (di->events.batt_rem) {
+ if (di->charge_state != STATE_BATT_REMOVED)
+ ab8500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT);
+ }
+ /* Main or USB charger not ok. */
+ else if (di->events.mainextchnotok || di->events.usbchargernotok) {
+ /*
+ * If vbus_collapsed is set, we have to lower the charger
+ * current, which is done in the normal state below
+ */
+ if (di->charge_state != STATE_CHG_NOT_OK &&
+ !di->events.vbus_collapsed)
+ ab8500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT);
+ }
+ /* VBUS, Main or VBAT OVV. */
+ else if (di->events.vbus_ovv ||
+ di->events.main_ovv ||
+ di->events.batt_ovv ||
+ !di->chg_info.usb_chg_ok ||
+ !di->chg_info.ac_chg_ok) {
+ if (di->charge_state != STATE_OVV_PROTECT)
+ ab8500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT);
+ }
+ /* USB Thermal, stop charging */
+ else if (di->events.main_thermal_prot ||
+ di->events.usb_thermal_prot) {
+ if (di->charge_state != STATE_HW_TEMP_PROTECT)
+ ab8500_chargalg_state_to(di,
+ STATE_HW_TEMP_PROTECT_INIT);
+ }
+ /* Battery temp over/under */
+ else if (di->events.btemp_underover) {
+ if (di->charge_state != STATE_TEMP_UNDEROVER)
+ ab8500_chargalg_state_to(di,
+ STATE_TEMP_UNDEROVER_INIT);
+ }
+ /* Watchdog expired */
+ else if (di->events.ac_wd_expired ||
+ di->events.usb_wd_expired) {
+ if (di->charge_state != STATE_WD_EXPIRED)
+ ab8500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT);
+ }
+ /* Battery temp high/low */
+ else if (di->events.btemp_low || di->events.btemp_high) {
+ if (di->charge_state != STATE_TEMP_LOWHIGH)
+ ab8500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT);
+ }
+
+ dev_dbg(di->dev,
+ "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d "
+ "State %s Active_chg %d Chg_status %d AC %d USB %d "
+ "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d "
+ "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n",
+ di->batt_data.volt_uv,
+ di->batt_data.avg_curr_ua,
+ di->batt_data.inst_curr_ua,
+ di->batt_data.temp,
+ di->batt_data.percent,
+ di->maintenance_chg,
+ states[di->charge_state],
+ di->chg_info.charger_type,
+ di->charge_status,
+ di->chg_info.conn_chg & AC_CHG,
+ di->chg_info.conn_chg & USB_CHG,
+ di->chg_info.online_chg & AC_CHG,
+ di->chg_info.online_chg & USB_CHG,
+ di->events.ac_cv_active,
+ di->events.usb_cv_active,
+ di->chg_info.ac_curr_ua,
+ di->chg_info.usb_curr_ua,
+ di->chg_info.ac_vset_uv,
+ di->chg_info.ac_iset_ua,
+ di->chg_info.usb_vset_uv,
+ di->chg_info.usb_iset_ua);
+
+ switch (di->charge_state) {
+ case STATE_HANDHELD_INIT:
+ ab8500_chargalg_stop_charging(di);
+ di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ ab8500_chargalg_state_to(di, STATE_HANDHELD);
+ fallthrough;
+
+ case STATE_HANDHELD:
+ break;
+
+ case STATE_BATT_REMOVED_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_BATT_REMOVED);
+ fallthrough;
+
+ case STATE_BATT_REMOVED:
+ if (!di->events.batt_rem)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_HW_TEMP_PROTECT_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT);
+ fallthrough;
+
+ case STATE_HW_TEMP_PROTECT:
+ if (!di->events.main_thermal_prot &&
+ !di->events.usb_thermal_prot)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_OVV_PROTECT_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_OVV_PROTECT);
+ fallthrough;
+
+ case STATE_OVV_PROTECT:
+ if (!di->events.vbus_ovv &&
+ !di->events.main_ovv &&
+ !di->events.batt_ovv &&
+ di->chg_info.usb_chg_ok &&
+ di->chg_info.ac_chg_ok)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_CHG_NOT_OK_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_CHG_NOT_OK);
+ fallthrough;
+
+ case STATE_CHG_NOT_OK:
+ if (!di->events.mainextchnotok &&
+ !di->events.usbchargernotok)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_SAFETY_TIMER_EXPIRED_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED);
+ fallthrough;
+
+ case STATE_SAFETY_TIMER_EXPIRED:
+ /* We exit this state when charger is removed */
+ break;
+
+ case STATE_NORMAL_INIT:
+ if (bi->constant_charge_current_max_ua == 0)
+ /* "charging" with 0 uA */
+ ab8500_chargalg_stop_charging(di);
+ else {
+ ab8500_chargalg_start_charging(di,
+ bi->constant_charge_voltage_max_uv,
+ bi->constant_charge_current_max_ua);
+ }
+
+ ab8500_chargalg_state_to(di, STATE_NORMAL);
+ ab8500_chargalg_start_safety_timer(di);
+ ab8500_chargalg_stop_maintenance_timer(di);
+ init_maxim_chg_curr(di);
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ di->eoc_cnt = 0;
+ di->maintenance_chg = false;
+ power_supply_changed(di->chargalg_psy);
+
+ break;
+
+ case STATE_NORMAL:
+ handle_maxim_chg_curr(di);
+ if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
+ di->maintenance_chg) {
+ /*
+ * The battery is fully charged, check if we support
+ * maintenance charging else go back to waiting for
+ * the recharge voltage limit.
+ */
+ if (!power_supply_supports_maintenance_charging(bi))
+ ab8500_chargalg_state_to(di,
+ STATE_WAIT_FOR_RECHARGE_INIT);
+ else
+ ab8500_chargalg_state_to(di,
+ STATE_MAINTENANCE_A_INIT);
+ }
+ break;
+
+ /* This state will be used when the maintenance state is disabled */
+ case STATE_WAIT_FOR_RECHARGE_INIT:
+ ab8500_chargalg_hold_charging(di);
+ ab8500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
+ fallthrough;
+
+ case STATE_WAIT_FOR_RECHARGE:
+ if (ab8500_chargalg_time_to_restart(di))
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_MAINTENANCE_A_INIT:
+ mt = power_supply_get_maintenance_charging_setting(bi, 0);
+ if (!mt) {
+ /* No maintenance A state, go back to normal */
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ power_supply_changed(di->chargalg_psy);
+ break;
+ }
+ ab8500_chargalg_stop_safety_timer(di);
+ ab8500_chargalg_start_maintenance_timer(di,
+ mt->charge_safety_timer_minutes);
+ ab8500_chargalg_start_charging(di,
+ mt->charge_voltage_max_uv,
+ mt->charge_current_max_ua);
+ ab8500_chargalg_state_to(di, STATE_MAINTENANCE_A);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_MAINTENANCE_A:
+ if (di->events.maintenance_timer_expired) {
+ ab8500_chargalg_stop_maintenance_timer(di);
+ ab8500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT);
+ }
+ /*
+ * This happens if the voltage drops too quickly during
+ * maintenance charging, especially in older batteries.
+ */
+ if (ab8500_chargalg_time_to_restart(di)) {
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ dev_info(di->dev, "restarted charging from maintenance state A - battery getting old?\n");
+ }
+ break;
+
+ case STATE_MAINTENANCE_B_INIT:
+ mt = power_supply_get_maintenance_charging_setting(bi, 1);
+ if (!mt) {
+ /* No maintenance B state, go back to normal */
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ power_supply_changed(di->chargalg_psy);
+ break;
+ }
+ ab8500_chargalg_start_maintenance_timer(di,
+ mt->charge_safety_timer_minutes);
+ ab8500_chargalg_start_charging(di,
+ mt->charge_voltage_max_uv,
+ mt->charge_current_max_ua);
+ ab8500_chargalg_state_to(di, STATE_MAINTENANCE_B);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_MAINTENANCE_B:
+ if (di->events.maintenance_timer_expired) {
+ ab8500_chargalg_stop_maintenance_timer(di);
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ }
+ /*
+ * This happens if the voltage drops too quickly during
+ * maintenance charging, especially in older batteries.
+ */
+ if (ab8500_chargalg_time_to_restart(di)) {
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ dev_info(di->dev, "restarted charging from maintenance state B - battery getting old?\n");
+ }
+ break;
+
+ case STATE_TEMP_LOWHIGH_INIT:
+ if (di->events.btemp_low) {
+ ab8500_chargalg_start_charging(di,
+ bi->alert_low_temp_charge_voltage_uv,
+ bi->alert_low_temp_charge_current_ua);
+ } else if (di->events.btemp_high) {
+ ab8500_chargalg_start_charging(di,
+ bi->alert_high_temp_charge_voltage_uv,
+ bi->alert_high_temp_charge_current_ua);
+ } else {
+ dev_err(di->dev, "neither low or high temp event occurred\n");
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+ }
+ ab8500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ ab8500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_TEMP_LOWHIGH:
+ if (!di->events.btemp_low && !di->events.btemp_high)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_WD_EXPIRED_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_WD_EXPIRED);
+ fallthrough;
+
+ case STATE_WD_EXPIRED:
+ if (!di->events.ac_wd_expired &&
+ !di->events.usb_wd_expired)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_TEMP_UNDEROVER_INIT:
+ ab8500_chargalg_stop_charging(di);
+ ab8500_chargalg_state_to(di, STATE_TEMP_UNDEROVER);
+ fallthrough;
+
+ case STATE_TEMP_UNDEROVER:
+ if (!di->events.btemp_underover)
+ ab8500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+ }
+
+ /* Start charging directly if the new state is a charge state */
+ if (di->charge_state == STATE_NORMAL_INIT ||
+ di->charge_state == STATE_MAINTENANCE_A_INIT ||
+ di->charge_state == STATE_MAINTENANCE_B_INIT)
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * ab8500_chargalg_periodic_work() - Periodic work for the algorithm
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for the charging algorithm
+ */
+static void ab8500_chargalg_periodic_work(struct work_struct *work)
+{
+ struct ab8500_chargalg *di = container_of(work,
+ struct ab8500_chargalg, chargalg_periodic_work.work);
+
+ ab8500_chargalg_algorithm(di);
+
+ /*
+ * If a charger is connected then the battery has to be monitored
+ * frequently, else the work can be delayed.
+ */
+ if (di->chg_info.conn_chg)
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_periodic_work,
+ di->bm->interval_charging * HZ);
+ else
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_periodic_work,
+ di->bm->interval_not_charging * HZ);
+}
+
+/**
+ * ab8500_chargalg_wd_work() - periodic work to kick the charger watchdog
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog
+ */
+static void ab8500_chargalg_wd_work(struct work_struct *work)
+{
+ int ret;
+ struct ab8500_chargalg *di = container_of(work,
+ struct ab8500_chargalg, chargalg_wd_work.work);
+
+ ret = ab8500_chargalg_kick_watchdog(di);
+ if (ret < 0)
+ dev_err(di->dev, "failed to kick watchdog\n");
+
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_wd_work, CHG_WD_INTERVAL);
+}
+
+/**
+ * ab8500_chargalg_work() - Work to run the charging algorithm instantly
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for calling the charging algorithm
+ */
+static void ab8500_chargalg_work(struct work_struct *work)
+{
+ struct ab8500_chargalg *di = container_of(work,
+ struct ab8500_chargalg, chargalg_work);
+
+ ab8500_chargalg_algorithm(di);
+}
+
+/**
+ * ab8500_chargalg_get_property() - get the chargalg properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * chargalg properties by reading the sysfs files.
+ * status: charging/discharging/full/unknown
+ * health: health of the battery
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_chargalg_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_chargalg *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = di->charge_status;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (di->events.batt_ovv) {
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else if (di->events.btemp_underover) {
+ if (di->batt_data.temp <= di->bm->bi->temp_min)
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED ||
+ di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ } else {
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int __maybe_unused ab8500_chargalg_resume(struct device *dev)
+{
+ struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+ /* Kick charger watchdog if charging (any charger online) */
+ if (di->chg_info.online_chg)
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
+
+ /*
+ * Run the charging algorithm directly to be sure we don't
+ * do it too seldom
+ */
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+ return 0;
+}
+
+static int __maybe_unused ab8500_chargalg_suspend(struct device *dev)
+{
+ struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+ if (di->chg_info.online_chg)
+ cancel_delayed_work_sync(&di->chargalg_wd_work);
+
+ cancel_delayed_work_sync(&di->chargalg_periodic_work);
+
+ return 0;
+}
+
+static char *supply_interface[] = {
+ "ab8500_fg",
+};
+
+static const struct power_supply_desc ab8500_chargalg_desc = {
+ .name = "ab8500_chargalg",
+ .type = POWER_SUPPLY_TYPE_UNKNOWN,
+ .properties = ab8500_chargalg_props,
+ .num_properties = ARRAY_SIZE(ab8500_chargalg_props),
+ .get_property = ab8500_chargalg_get_property,
+ .external_power_changed = ab8500_chargalg_external_power_changed,
+};
+
+static int ab8500_chargalg_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+ /* Create a work queue for the chargalg */
+ di->chargalg_wq = alloc_ordered_workqueue("ab8500_chargalg_wq",
+ WQ_MEM_RECLAIM);
+ if (di->chargalg_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ return -ENOMEM;
+ }
+
+ /* Run the charging algorithm */
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+ return 0;
+}
+
+static void ab8500_chargalg_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ struct ab8500_chargalg *di = dev_get_drvdata(dev);
+
+ /* Stop all timers and work */
+ hrtimer_cancel(&di->safety_timer);
+ hrtimer_cancel(&di->maintenance_timer);
+
+ cancel_delayed_work_sync(&di->chargalg_periodic_work);
+ cancel_delayed_work_sync(&di->chargalg_wd_work);
+ cancel_work_sync(&di->chargalg_work);
+
+ /* Delete the work queue */
+ destroy_workqueue(di->chargalg_wq);
+}
+
+static const struct component_ops ab8500_chargalg_component_ops = {
+ .bind = ab8500_chargalg_bind,
+ .unbind = ab8500_chargalg_unbind,
+};
+
+static int ab8500_chargalg_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct power_supply_config psy_cfg = {};
+ struct ab8500_chargalg *di;
+
+ di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ di->bm = &ab8500_bm_data;
+
+ /* get device struct and parent */
+ di->dev = dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+
+ psy_cfg.supplied_to = supply_interface;
+ psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+ psy_cfg.drv_data = di;
+
+ /* Initilialize safety timer */
+ hrtimer_init(&di->safety_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ di->safety_timer.function = ab8500_chargalg_safety_timer_expired;
+
+ /* Initilialize maintenance timer */
+ hrtimer_init(&di->maintenance_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ di->maintenance_timer.function =
+ ab8500_chargalg_maintenance_timer_expired;
+
+ /* Init work for chargalg */
+ INIT_DEFERRABLE_WORK(&di->chargalg_periodic_work,
+ ab8500_chargalg_periodic_work);
+ INIT_DEFERRABLE_WORK(&di->chargalg_wd_work,
+ ab8500_chargalg_wd_work);
+
+ /* Init work for chargalg */
+ INIT_WORK(&di->chargalg_work, ab8500_chargalg_work);
+
+ /* To detect charger at startup */
+ di->chg_info.prev_conn_chg = -1;
+
+ /* Register chargalg power supply class */
+ di->chargalg_psy = devm_power_supply_register(di->dev,
+ &ab8500_chargalg_desc,
+ &psy_cfg);
+ if (IS_ERR(di->chargalg_psy)) {
+ dev_err(di->dev, "failed to register chargalg psy\n");
+ return PTR_ERR(di->chargalg_psy);
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ dev_info(di->dev, "probe success\n");
+ return component_add(dev, &ab8500_chargalg_component_ops);
+}
+
+static int ab8500_chargalg_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &ab8500_chargalg_component_ops);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ab8500_chargalg_pm_ops, ab8500_chargalg_suspend, ab8500_chargalg_resume);
+
+static const struct of_device_id ab8500_chargalg_match[] = {
+ { .compatible = "stericsson,ab8500-chargalg", },
+ { },
+};
+
+struct platform_driver ab8500_chargalg_driver = {
+ .probe = ab8500_chargalg_probe,
+ .remove = ab8500_chargalg_remove,
+ .driver = {
+ .name = "ab8500_chargalg",
+ .of_match_table = ab8500_chargalg_match,
+ .pm = &ab8500_chargalg_pm_ops,
+ },
+};
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:ab8500-chargalg");
+MODULE_DESCRIPTION("ab8500 battery charging algorithm");