summaryrefslogtreecommitdiffstats
path: root/drivers/rapidio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rapidio')
-rw-r--r--drivers/rapidio/Kconfig104
-rw-r--r--drivers/rapidio/Makefile14
-rw-r--r--drivers/rapidio/devices/Kconfig11
-rw-r--r--drivers/rapidio/devices/Makefile9
-rw-r--r--drivers/rapidio/devices/rio_mport_cdev.c2645
-rw-r--r--drivers/rapidio/devices/tsi721.c3002
-rw-r--r--drivers/rapidio/devices/tsi721.h923
-rw-r--r--drivers/rapidio/devices/tsi721_dma.c1042
-rw-r--r--drivers/rapidio/rio-access.c143
-rw-r--r--drivers/rapidio/rio-driver.c267
-rw-r--r--drivers/rapidio/rio-scan.c1156
-rw-r--r--drivers/rapidio/rio-sysfs.c366
-rw-r--r--drivers/rapidio/rio.c2251
-rw-r--r--drivers/rapidio/rio.h55
-rw-r--r--drivers/rapidio/rio_cm.c2376
-rw-r--r--drivers/rapidio/switches/Kconfig20
-rw-r--r--drivers/rapidio/switches/Makefile8
-rw-r--r--drivers/rapidio/switches/idt_gen2.c490
-rw-r--r--drivers/rapidio/switches/idt_gen3.c378
-rw-r--r--drivers/rapidio/switches/idtcps.c199
20 files changed, 15459 insertions, 0 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
new file mode 100644
index 000000000..b9f851490
--- /dev/null
+++ b/drivers/rapidio/Kconfig
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# RapidIO configuration
+#
+
+config HAVE_RAPIDIO
+ bool
+
+menuconfig RAPIDIO
+ tristate "RapidIO support"
+ depends on HAVE_RAPIDIO || PCI
+ help
+ If you say Y here, the kernel will include drivers and
+ infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/devices/Kconfig"
+
+config RAPIDIO_DISC_TIMEOUT
+ int "Discovery timeout duration (seconds)"
+ depends on RAPIDIO
+ default "30"
+ help
+ Amount of time a discovery node waits for a host to complete
+ enumeration before giving up.
+
+config RAPIDIO_ENABLE_RX_TX_PORTS
+ bool "Enable RapidIO Input/Output Ports"
+ depends on RAPIDIO
+ help
+ The RapidIO specification describes a Output port transmit
+ enable and a Input port receive enable. The recommended state
+ for Input ports and Output ports should be disabled. When
+ this switch is set the RapidIO subsystem will enable all
+ ports for Input/Output direction to allow other traffic
+ than Maintenance transfers.
+
+config RAPIDIO_DMA_ENGINE
+ bool "DMA Engine support for RapidIO"
+ depends on RAPIDIO
+ depends on DMADEVICES
+ select DMA_ENGINE
+ help
+ Say Y here if you want to use DMA Engine frameork for RapidIO data
+ transfers to/from target RIO devices. RapidIO uses NREAD and
+ NWRITE (NWRITE_R, SWRITE) requests to transfer data between local
+ memory and memory on remote target device. You need a DMA controller
+ capable to perform data transfers to/from RapidIO.
+
+ If you are unsure about this, say Y here.
+
+config RAPIDIO_DEBUG
+ bool "RapidIO subsystem debug messages"
+ depends on RAPIDIO
+ help
+ Say Y here if you want the RapidIO subsystem to produce a bunch of
+ debug messages to the system log. Select this if you are having a
+ problem with the RapidIO subsystem and want to see more of what is
+ going on.
+
+ If you are unsure about this, say N here.
+
+choice
+ prompt "Enumeration method"
+ depends on RAPIDIO
+ default RAPIDIO_ENUM_BASIC
+ help
+ There are different enumeration and discovery mechanisms offered
+ for RapidIO subsystem. You may select single built-in method or
+ or any number of methods to be built as modules.
+ Selecting a built-in method disables use of loadable methods.
+
+ If unsure, select Basic built-in.
+
+config RAPIDIO_ENUM_BASIC
+ tristate "Basic"
+ help
+ This option includes basic RapidIO fabric enumeration and discovery
+ mechanism similar to one described in RapidIO specification Annex 1.
+
+endchoice
+
+config RAPIDIO_CHMAN
+ tristate "RapidIO Channelized Messaging driver"
+ depends on RAPIDIO
+ help
+ This option includes RapidIO channelized messaging driver which
+ provides socket-like interface to allow sharing of single RapidIO
+ messaging mailbox between multiple user-space applications.
+ See "Documentation/driver-api/rapidio/rio_cm.rst" for driver description.
+
+config RAPIDIO_MPORT_CDEV
+ tristate "RapidIO /dev mport device driver"
+ depends on RAPIDIO
+ help
+ This option includes generic RapidIO mport device driver which
+ allows to user space applications to perform RapidIO-specific
+ operations through selected RapidIO mport.
+
+menu "RapidIO Switch drivers"
+ depends on RAPIDIO
+
+source "drivers/rapidio/switches/Kconfig"
+
+endmenu
diff --git a/drivers/rapidio/Makefile b/drivers/rapidio/Makefile
new file mode 100644
index 000000000..a34b0254b
--- /dev/null
+++ b/drivers/rapidio/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for RapidIO interconnect services
+#
+obj-$(CONFIG_RAPIDIO) += rapidio.o
+rapidio-y := rio.o rio-access.o rio-driver.o rio-sysfs.o
+
+obj-$(CONFIG_RAPIDIO_ENUM_BASIC) += rio-scan.o
+obj-$(CONFIG_RAPIDIO_CHMAN) += rio_cm.o
+
+obj-$(CONFIG_RAPIDIO) += switches/
+obj-$(CONFIG_RAPIDIO) += devices/
+
+subdir-ccflags-$(CONFIG_RAPIDIO_DEBUG) := -DDEBUG
diff --git a/drivers/rapidio/devices/Kconfig b/drivers/rapidio/devices/Kconfig
new file mode 100644
index 000000000..c416531ad
--- /dev/null
+++ b/drivers/rapidio/devices/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# RapidIO master port configuration
+#
+
+config RAPIDIO_TSI721
+ tristate "IDT Tsi721 PCI Express SRIO Controller support"
+ depends on RAPIDIO && PCIEPORTBUS
+ default "n"
+ help
+ Include support for IDT Tsi721 PCI Express Serial RapidIO controller.
diff --git a/drivers/rapidio/devices/Makefile b/drivers/rapidio/devices/Makefile
new file mode 100644
index 000000000..bf0e2e4d0
--- /dev/null
+++ b/drivers/rapidio/devices/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for RapidIO devices
+#
+
+obj-$(CONFIG_RAPIDIO_TSI721) += tsi721_mport.o
+tsi721_mport-y := tsi721.o
+tsi721_mport-$(CONFIG_RAPIDIO_DMA_ENGINE) += tsi721_dma.o
+obj-$(CONFIG_RAPIDIO_MPORT_CDEV) += rio_mport_cdev.o
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
new file mode 100644
index 000000000..43db495f1
--- /dev/null
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -0,0 +1,2645 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO mport character device
+ *
+ * Copyright 2014-2015 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * Copyright 2014-2015 Prodrive Technologies
+ * Andre van Herk <andre.van.herk@prodrive-technologies.com>
+ * Jerry Jacobs <jerry.jacobs@prodrive-technologies.com>
+ * Copyright (C) 2014 Texas Instruments Incorporated
+ * Aurelien Jacquiot <a-jacquiot@ti.com>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/cdev.h>
+#include <linux/ioctl.h>
+#include <linux/uaccess.h>
+#include <linux/list.h>
+#include <linux/fs.h>
+#include <linux/err.h>
+#include <linux/net.h>
+#include <linux/poll.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/kfifo.h>
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/mman.h>
+
+#include <linux/dma-mapping.h>
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+#include <linux/dmaengine.h>
+#endif
+
+#include <linux/rio.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_mport_cdev.h>
+
+#include "../rio.h"
+
+#define DRV_NAME "rio_mport"
+#define DRV_PREFIX DRV_NAME ": "
+#define DEV_NAME "rio_mport"
+#define DRV_VERSION "1.0.0"
+
+/* Debug output filtering masks */
+enum {
+ DBG_NONE = 0,
+ DBG_INIT = BIT(0), /* driver init */
+ DBG_EXIT = BIT(1), /* driver exit */
+ DBG_MPORT = BIT(2), /* mport add/remove */
+ DBG_RDEV = BIT(3), /* RapidIO device add/remove */
+ DBG_DMA = BIT(4), /* DMA transfer messages */
+ DBG_MMAP = BIT(5), /* mapping messages */
+ DBG_IBW = BIT(6), /* inbound window */
+ DBG_EVENT = BIT(7), /* event handling messages */
+ DBG_OBW = BIT(8), /* outbound window messages */
+ DBG_DBELL = BIT(9), /* doorbell messages */
+ DBG_ALL = ~0,
+};
+
+#ifdef DEBUG
+#define rmcd_debug(level, fmt, arg...) \
+ do { \
+ if (DBG_##level & dbg_level) \
+ pr_debug(DRV_PREFIX "%s: " fmt "\n", __func__, ##arg); \
+ } while (0)
+#else
+#define rmcd_debug(level, fmt, arg...) \
+ no_printk(KERN_DEBUG pr_fmt(DRV_PREFIX fmt "\n"), ##arg)
+#endif
+
+#define rmcd_warn(fmt, arg...) \
+ pr_warn(DRV_PREFIX "%s WARNING " fmt "\n", __func__, ##arg)
+
+#define rmcd_error(fmt, arg...) \
+ pr_err(DRV_PREFIX "%s ERROR " fmt "\n", __func__, ##arg)
+
+MODULE_AUTHOR("Jerry Jacobs <jerry.jacobs@prodrive-technologies.com>");
+MODULE_AUTHOR("Aurelien Jacquiot <a-jacquiot@ti.com>");
+MODULE_AUTHOR("Alexandre Bounine <alexandre.bounine@idt.com>");
+MODULE_AUTHOR("Andre van Herk <andre.van.herk@prodrive-technologies.com>");
+MODULE_DESCRIPTION("RapidIO mport character device driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int dma_timeout = 3000; /* DMA transfer timeout in msec */
+module_param(dma_timeout, int, S_IRUGO);
+MODULE_PARM_DESC(dma_timeout, "DMA Transfer Timeout in msec (default: 3000)");
+
+#ifdef DEBUG
+static u32 dbg_level = DBG_NONE;
+module_param(dbg_level, uint, S_IWUSR | S_IWGRP | S_IRUGO);
+MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
+#endif
+
+/*
+ * An internal DMA coherent buffer
+ */
+struct mport_dma_buf {
+ void *ib_base;
+ dma_addr_t ib_phys;
+ u32 ib_size;
+ u64 ib_rio_base;
+ bool ib_map;
+ struct file *filp;
+};
+
+/*
+ * Internal memory mapping structure
+ */
+enum rio_mport_map_dir {
+ MAP_INBOUND,
+ MAP_OUTBOUND,
+ MAP_DMA,
+};
+
+struct rio_mport_mapping {
+ struct list_head node;
+ struct mport_dev *md;
+ enum rio_mport_map_dir dir;
+ u16 rioid;
+ u64 rio_addr;
+ dma_addr_t phys_addr; /* for mmap */
+ void *virt_addr; /* kernel address, for dma_free_coherent */
+ u64 size;
+ struct kref ref; /* refcount of vmas sharing the mapping */
+ struct file *filp;
+};
+
+struct rio_mport_dma_map {
+ int valid;
+ u64 length;
+ void *vaddr;
+ dma_addr_t paddr;
+};
+
+#define MPORT_MAX_DMA_BUFS 16
+#define MPORT_EVENT_DEPTH 10
+
+/*
+ * mport_dev driver-specific structure that represents mport device
+ * @active mport device status flag
+ * @node list node to maintain list of registered mports
+ * @cdev character device
+ * @dev associated device object
+ * @mport associated subsystem's master port device object
+ * @buf_mutex lock for buffer handling
+ * @file_mutex - lock for open files list
+ * @file_list - list of open files on given mport
+ * @properties properties of this mport
+ * @portwrites queue of inbound portwrites
+ * @pw_lock lock for port write queue
+ * @mappings queue for memory mappings
+ * @dma_chan DMA channels associated with this device
+ * @dma_ref:
+ * @comp:
+ */
+struct mport_dev {
+ atomic_t active;
+ struct list_head node;
+ struct cdev cdev;
+ struct device dev;
+ struct rio_mport *mport;
+ struct mutex buf_mutex;
+ struct mutex file_mutex;
+ struct list_head file_list;
+ struct rio_mport_properties properties;
+ struct list_head doorbells;
+ spinlock_t db_lock;
+ struct list_head portwrites;
+ spinlock_t pw_lock;
+ struct list_head mappings;
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ struct dma_chan *dma_chan;
+ struct kref dma_ref;
+ struct completion comp;
+#endif
+};
+
+/*
+ * mport_cdev_priv - data structure specific to individual file object
+ * associated with an open device
+ * @md master port character device object
+ * @async_queue - asynchronous notification queue
+ * @list - file objects tracking list
+ * @db_filters inbound doorbell filters for this descriptor
+ * @pw_filters portwrite filters for this descriptor
+ * @event_fifo event fifo for this descriptor
+ * @event_rx_wait wait queue for this descriptor
+ * @fifo_lock lock for event_fifo
+ * @event_mask event mask for this descriptor
+ * @dmach DMA engine channel allocated for specific file object
+ */
+struct mport_cdev_priv {
+ struct mport_dev *md;
+ struct fasync_struct *async_queue;
+ struct list_head list;
+ struct list_head db_filters;
+ struct list_head pw_filters;
+ struct kfifo event_fifo;
+ wait_queue_head_t event_rx_wait;
+ spinlock_t fifo_lock;
+ u32 event_mask; /* RIO_DOORBELL, RIO_PORTWRITE */
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ struct dma_chan *dmach;
+ struct list_head async_list;
+ spinlock_t req_lock;
+ struct mutex dma_lock;
+ struct kref dma_ref;
+ struct completion comp;
+#endif
+};
+
+/*
+ * rio_mport_pw_filter - structure to describe a portwrite filter
+ * md_node node in mport device's list
+ * priv_node node in private file object's list
+ * priv reference to private data
+ * filter actual portwrite filter
+ */
+struct rio_mport_pw_filter {
+ struct list_head md_node;
+ struct list_head priv_node;
+ struct mport_cdev_priv *priv;
+ struct rio_pw_filter filter;
+};
+
+/*
+ * rio_mport_db_filter - structure to describe a doorbell filter
+ * @data_node reference to device node
+ * @priv_node node in private data
+ * @priv reference to private data
+ * @filter actual doorbell filter
+ */
+struct rio_mport_db_filter {
+ struct list_head data_node;
+ struct list_head priv_node;
+ struct mport_cdev_priv *priv;
+ struct rio_doorbell_filter filter;
+};
+
+static LIST_HEAD(mport_devs);
+static DEFINE_MUTEX(mport_devs_lock);
+
+#if (0) /* used by commented out portion of poll function : FIXME */
+static DECLARE_WAIT_QUEUE_HEAD(mport_cdev_wait);
+#endif
+
+static struct class *dev_class;
+static dev_t dev_number;
+
+static void mport_release_mapping(struct kref *ref);
+
+static int rio_mport_maint_rd(struct mport_cdev_priv *priv, void __user *arg,
+ int local)
+{
+ struct rio_mport *mport = priv->md->mport;
+ struct rio_mport_maint_io maint_io;
+ u32 *buffer;
+ u32 offset;
+ size_t length;
+ int ret, i;
+
+ if (unlikely(copy_from_user(&maint_io, arg, sizeof(maint_io))))
+ return -EFAULT;
+
+ if ((maint_io.offset % 4) ||
+ (maint_io.length == 0) || (maint_io.length % 4) ||
+ (maint_io.length + maint_io.offset) > RIO_MAINT_SPACE_SZ)
+ return -EINVAL;
+
+ buffer = vmalloc(maint_io.length);
+ if (buffer == NULL)
+ return -ENOMEM;
+ length = maint_io.length/sizeof(u32);
+ offset = maint_io.offset;
+
+ for (i = 0; i < length; i++) {
+ if (local)
+ ret = __rio_local_read_config_32(mport,
+ offset, &buffer[i]);
+ else
+ ret = rio_mport_read_config_32(mport, maint_io.rioid,
+ maint_io.hopcount, offset, &buffer[i]);
+ if (ret)
+ goto out;
+
+ offset += 4;
+ }
+
+ if (unlikely(copy_to_user((void __user *)(uintptr_t)maint_io.buffer,
+ buffer, maint_io.length)))
+ ret = -EFAULT;
+out:
+ vfree(buffer);
+ return ret;
+}
+
+static int rio_mport_maint_wr(struct mport_cdev_priv *priv, void __user *arg,
+ int local)
+{
+ struct rio_mport *mport = priv->md->mport;
+ struct rio_mport_maint_io maint_io;
+ u32 *buffer;
+ u32 offset;
+ size_t length;
+ int ret = -EINVAL, i;
+
+ if (unlikely(copy_from_user(&maint_io, arg, sizeof(maint_io))))
+ return -EFAULT;
+
+ if ((maint_io.offset % 4) ||
+ (maint_io.length == 0) || (maint_io.length % 4) ||
+ (maint_io.length + maint_io.offset) > RIO_MAINT_SPACE_SZ)
+ return -EINVAL;
+
+ buffer = vmalloc(maint_io.length);
+ if (buffer == NULL)
+ return -ENOMEM;
+ length = maint_io.length;
+
+ if (unlikely(copy_from_user(buffer,
+ (void __user *)(uintptr_t)maint_io.buffer, length))) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ offset = maint_io.offset;
+ length /= sizeof(u32);
+
+ for (i = 0; i < length; i++) {
+ if (local)
+ ret = __rio_local_write_config_32(mport,
+ offset, buffer[i]);
+ else
+ ret = rio_mport_write_config_32(mport, maint_io.rioid,
+ maint_io.hopcount,
+ offset, buffer[i]);
+ if (ret)
+ goto out;
+
+ offset += 4;
+ }
+
+out:
+ vfree(buffer);
+ return ret;
+}
+
+
+/*
+ * Inbound/outbound memory mapping functions
+ */
+static int
+rio_mport_create_outbound_mapping(struct mport_dev *md, struct file *filp,
+ u16 rioid, u64 raddr, u32 size,
+ dma_addr_t *paddr)
+{
+ struct rio_mport *mport = md->mport;
+ struct rio_mport_mapping *map;
+ int ret;
+
+ rmcd_debug(OBW, "did=%d ra=0x%llx sz=0x%x", rioid, raddr, size);
+
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
+ if (map == NULL)
+ return -ENOMEM;
+
+ ret = rio_map_outb_region(mport, rioid, raddr, size, 0, paddr);
+ if (ret < 0)
+ goto err_map_outb;
+
+ map->dir = MAP_OUTBOUND;
+ map->rioid = rioid;
+ map->rio_addr = raddr;
+ map->size = size;
+ map->phys_addr = *paddr;
+ map->filp = filp;
+ map->md = md;
+ kref_init(&map->ref);
+ list_add_tail(&map->node, &md->mappings);
+ return 0;
+err_map_outb:
+ kfree(map);
+ return ret;
+}
+
+static int
+rio_mport_get_outbound_mapping(struct mport_dev *md, struct file *filp,
+ u16 rioid, u64 raddr, u32 size,
+ dma_addr_t *paddr)
+{
+ struct rio_mport_mapping *map;
+ int err = -ENOMEM;
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry(map, &md->mappings, node) {
+ if (map->dir != MAP_OUTBOUND)
+ continue;
+ if (rioid == map->rioid &&
+ raddr == map->rio_addr && size == map->size) {
+ *paddr = map->phys_addr;
+ err = 0;
+ break;
+ } else if (rioid == map->rioid &&
+ raddr < (map->rio_addr + map->size - 1) &&
+ (raddr + size) > map->rio_addr) {
+ err = -EBUSY;
+ break;
+ }
+ }
+
+ /* If not found, create new */
+ if (err == -ENOMEM)
+ err = rio_mport_create_outbound_mapping(md, filp, rioid, raddr,
+ size, paddr);
+ mutex_unlock(&md->buf_mutex);
+ return err;
+}
+
+static int rio_mport_obw_map(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *data = priv->md;
+ struct rio_mmap map;
+ dma_addr_t paddr;
+ int ret;
+
+ if (unlikely(copy_from_user(&map, arg, sizeof(map))))
+ return -EFAULT;
+
+ rmcd_debug(OBW, "did=%d ra=0x%llx sz=0x%llx",
+ map.rioid, map.rio_addr, map.length);
+
+ ret = rio_mport_get_outbound_mapping(data, filp, map.rioid,
+ map.rio_addr, map.length, &paddr);
+ if (ret < 0) {
+ rmcd_error("Failed to set OBW err= %d", ret);
+ return ret;
+ }
+
+ map.handle = paddr;
+
+ if (unlikely(copy_to_user(arg, &map, sizeof(map))))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * rio_mport_obw_free() - unmap an OutBound Window from RapidIO address space
+ *
+ * @priv: driver private data
+ * @arg: buffer handle returned by allocation routine
+ */
+static int rio_mport_obw_free(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md = priv->md;
+ u64 handle;
+ struct rio_mport_mapping *map, *_map;
+
+ if (!md->mport->ops->unmap_outb)
+ return -EPROTONOSUPPORT;
+
+ if (copy_from_user(&handle, arg, sizeof(handle)))
+ return -EFAULT;
+
+ rmcd_debug(OBW, "h=0x%llx", handle);
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry_safe(map, _map, &md->mappings, node) {
+ if (map->dir == MAP_OUTBOUND && map->phys_addr == handle) {
+ if (map->filp == filp) {
+ rmcd_debug(OBW, "kref_put h=0x%llx", handle);
+ map->filp = NULL;
+ kref_put(&map->ref, mport_release_mapping);
+ }
+ break;
+ }
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ return 0;
+}
+
+/*
+ * maint_hdid_set() - Set the host Device ID
+ * @priv: driver private data
+ * @arg: Device Id
+ */
+static int maint_hdid_set(struct mport_cdev_priv *priv, void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ u16 hdid;
+
+ if (copy_from_user(&hdid, arg, sizeof(hdid)))
+ return -EFAULT;
+
+ md->mport->host_deviceid = hdid;
+ md->properties.hdid = hdid;
+ rio_local_set_device_id(md->mport, hdid);
+
+ rmcd_debug(MPORT, "Set host device Id to %d", hdid);
+
+ return 0;
+}
+
+/*
+ * maint_comptag_set() - Set the host Component Tag
+ * @priv: driver private data
+ * @arg: Component Tag
+ */
+static int maint_comptag_set(struct mport_cdev_priv *priv, void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ u32 comptag;
+
+ if (copy_from_user(&comptag, arg, sizeof(comptag)))
+ return -EFAULT;
+
+ rio_local_write_config_32(md->mport, RIO_COMPONENT_TAG_CSR, comptag);
+
+ rmcd_debug(MPORT, "Set host Component Tag to %d", comptag);
+
+ return 0;
+}
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+struct mport_dma_req {
+ struct kref refcount;
+ struct list_head node;
+ struct file *filp;
+ struct mport_cdev_priv *priv;
+ enum rio_transfer_sync sync;
+ struct sg_table sgt;
+ struct page **page_list;
+ unsigned int nr_pages;
+ struct rio_mport_mapping *map;
+ struct dma_chan *dmach;
+ enum dma_data_direction dir;
+ dma_cookie_t cookie;
+ enum dma_status status;
+ struct completion req_comp;
+};
+
+static void mport_release_def_dma(struct kref *dma_ref)
+{
+ struct mport_dev *md =
+ container_of(dma_ref, struct mport_dev, dma_ref);
+
+ rmcd_debug(EXIT, "DMA_%d", md->dma_chan->chan_id);
+ rio_release_dma(md->dma_chan);
+ md->dma_chan = NULL;
+}
+
+static void mport_release_dma(struct kref *dma_ref)
+{
+ struct mport_cdev_priv *priv =
+ container_of(dma_ref, struct mport_cdev_priv, dma_ref);
+
+ rmcd_debug(EXIT, "DMA_%d", priv->dmach->chan_id);
+ complete(&priv->comp);
+}
+
+static void dma_req_free(struct kref *ref)
+{
+ struct mport_dma_req *req = container_of(ref, struct mport_dma_req,
+ refcount);
+ struct mport_cdev_priv *priv = req->priv;
+
+ dma_unmap_sg(req->dmach->device->dev,
+ req->sgt.sgl, req->sgt.nents, req->dir);
+ sg_free_table(&req->sgt);
+ if (req->page_list) {
+ unpin_user_pages(req->page_list, req->nr_pages);
+ kfree(req->page_list);
+ }
+
+ if (req->map) {
+ mutex_lock(&req->map->md->buf_mutex);
+ kref_put(&req->map->ref, mport_release_mapping);
+ mutex_unlock(&req->map->md->buf_mutex);
+ }
+
+ kref_put(&priv->dma_ref, mport_release_dma);
+
+ kfree(req);
+}
+
+static void dma_xfer_callback(void *param)
+{
+ struct mport_dma_req *req = (struct mport_dma_req *)param;
+ struct mport_cdev_priv *priv = req->priv;
+
+ req->status = dma_async_is_tx_complete(priv->dmach, req->cookie,
+ NULL, NULL);
+ complete(&req->req_comp);
+ kref_put(&req->refcount, dma_req_free);
+}
+
+/*
+ * prep_dma_xfer() - Configure and send request to DMAengine to prepare DMA
+ * transfer object.
+ * Returns pointer to DMA transaction descriptor allocated by DMA driver on
+ * success or ERR_PTR (and/or NULL) if failed. Caller must check returned
+ * non-NULL pointer using IS_ERR macro.
+ */
+static struct dma_async_tx_descriptor
+*prep_dma_xfer(struct dma_chan *chan, struct rio_transfer_io *transfer,
+ struct sg_table *sgt, int nents, enum dma_transfer_direction dir,
+ enum dma_ctrl_flags flags)
+{
+ struct rio_dma_data tx_data;
+
+ tx_data.sg = sgt->sgl;
+ tx_data.sg_len = nents;
+ tx_data.rio_addr_u = 0;
+ tx_data.rio_addr = transfer->rio_addr;
+ if (dir == DMA_MEM_TO_DEV) {
+ switch (transfer->method) {
+ case RIO_EXCHANGE_NWRITE:
+ tx_data.wr_type = RDW_ALL_NWRITE;
+ break;
+ case RIO_EXCHANGE_NWRITE_R_ALL:
+ tx_data.wr_type = RDW_ALL_NWRITE_R;
+ break;
+ case RIO_EXCHANGE_NWRITE_R:
+ tx_data.wr_type = RDW_LAST_NWRITE_R;
+ break;
+ case RIO_EXCHANGE_DEFAULT:
+ tx_data.wr_type = RDW_DEFAULT;
+ break;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
+ return rio_dma_prep_xfer(chan, transfer->rioid, &tx_data, dir, flags);
+}
+
+/* Request DMA channel associated with this mport device.
+ * Try to request DMA channel for every new process that opened given
+ * mport. If a new DMA channel is not available use default channel
+ * which is the first DMA channel opened on mport device.
+ */
+static int get_dma_channel(struct mport_cdev_priv *priv)
+{
+ mutex_lock(&priv->dma_lock);
+ if (!priv->dmach) {
+ priv->dmach = rio_request_mport_dma(priv->md->mport);
+ if (!priv->dmach) {
+ /* Use default DMA channel if available */
+ if (priv->md->dma_chan) {
+ priv->dmach = priv->md->dma_chan;
+ kref_get(&priv->md->dma_ref);
+ } else {
+ rmcd_error("Failed to get DMA channel");
+ mutex_unlock(&priv->dma_lock);
+ return -ENODEV;
+ }
+ } else if (!priv->md->dma_chan) {
+ /* Register default DMA channel if we do not have one */
+ priv->md->dma_chan = priv->dmach;
+ kref_init(&priv->md->dma_ref);
+ rmcd_debug(DMA, "Register DMA_chan %d as default",
+ priv->dmach->chan_id);
+ }
+
+ kref_init(&priv->dma_ref);
+ init_completion(&priv->comp);
+ }
+
+ kref_get(&priv->dma_ref);
+ mutex_unlock(&priv->dma_lock);
+ return 0;
+}
+
+static void put_dma_channel(struct mport_cdev_priv *priv)
+{
+ kref_put(&priv->dma_ref, mport_release_dma);
+}
+
+/*
+ * DMA transfer functions
+ */
+static int do_dma_request(struct mport_dma_req *req,
+ struct rio_transfer_io *xfer,
+ enum rio_transfer_sync sync, int nents)
+{
+ struct mport_cdev_priv *priv;
+ struct sg_table *sgt;
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *tx;
+ dma_cookie_t cookie;
+ unsigned long tmo = msecs_to_jiffies(dma_timeout);
+ enum dma_transfer_direction dir;
+ long wret;
+ int ret = 0;
+
+ priv = req->priv;
+ sgt = &req->sgt;
+
+ chan = priv->dmach;
+ dir = (req->dir == DMA_FROM_DEVICE) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+
+ rmcd_debug(DMA, "%s(%d) uses %s for DMA_%s",
+ current->comm, task_pid_nr(current),
+ dev_name(&chan->dev->device),
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE");
+
+ /* Initialize DMA transaction request */
+ tx = prep_dma_xfer(chan, xfer, sgt, nents, dir,
+ DMA_CTRL_ACK | DMA_PREP_INTERRUPT);
+
+ if (!tx) {
+ rmcd_debug(DMA, "prep error for %s A:0x%llx L:0x%llx",
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE",
+ xfer->rio_addr, xfer->length);
+ ret = -EIO;
+ goto err_out;
+ } else if (IS_ERR(tx)) {
+ ret = PTR_ERR(tx);
+ rmcd_debug(DMA, "prep error %d for %s A:0x%llx L:0x%llx", ret,
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE",
+ xfer->rio_addr, xfer->length);
+ goto err_out;
+ }
+
+ tx->callback = dma_xfer_callback;
+ tx->callback_param = req;
+
+ req->status = DMA_IN_PROGRESS;
+ kref_get(&req->refcount);
+
+ cookie = dmaengine_submit(tx);
+ req->cookie = cookie;
+
+ rmcd_debug(DMA, "pid=%d DMA_%s tx_cookie = %d", task_pid_nr(current),
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE", cookie);
+
+ if (dma_submit_error(cookie)) {
+ rmcd_error("submit err=%d (addr:0x%llx len:0x%llx)",
+ cookie, xfer->rio_addr, xfer->length);
+ kref_put(&req->refcount, dma_req_free);
+ ret = -EIO;
+ goto err_out;
+ }
+
+ dma_async_issue_pending(chan);
+
+ if (sync == RIO_TRANSFER_ASYNC) {
+ spin_lock(&priv->req_lock);
+ list_add_tail(&req->node, &priv->async_list);
+ spin_unlock(&priv->req_lock);
+ return cookie;
+ } else if (sync == RIO_TRANSFER_FAF)
+ return 0;
+
+ wret = wait_for_completion_interruptible_timeout(&req->req_comp, tmo);
+
+ if (wret == 0) {
+ /* Timeout on wait occurred */
+ rmcd_error("%s(%d) timed out waiting for DMA_%s %d",
+ current->comm, task_pid_nr(current),
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE", cookie);
+ return -ETIMEDOUT;
+ } else if (wret == -ERESTARTSYS) {
+ /* Wait_for_completion was interrupted by a signal but DMA may
+ * be in progress
+ */
+ rmcd_error("%s(%d) wait for DMA_%s %d was interrupted",
+ current->comm, task_pid_nr(current),
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE", cookie);
+ return -EINTR;
+ }
+
+ if (req->status != DMA_COMPLETE) {
+ /* DMA transaction completion was signaled with error */
+ rmcd_error("%s(%d) DMA_%s %d completed with status %d (ret=%d)",
+ current->comm, task_pid_nr(current),
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE",
+ cookie, req->status, ret);
+ ret = -EIO;
+ }
+
+err_out:
+ return ret;
+}
+
+/*
+ * rio_dma_transfer() - Perform RapidIO DMA data transfer to/from
+ * the remote RapidIO device
+ * @filp: file pointer associated with the call
+ * @transfer_mode: DMA transfer mode
+ * @sync: synchronization mode
+ * @dir: DMA transfer direction (DMA_MEM_TO_DEV = write OR
+ * DMA_DEV_TO_MEM = read)
+ * @xfer: data transfer descriptor structure
+ */
+static int
+rio_dma_transfer(struct file *filp, u32 transfer_mode,
+ enum rio_transfer_sync sync, enum dma_data_direction dir,
+ struct rio_transfer_io *xfer)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ unsigned long nr_pages = 0;
+ struct page **page_list = NULL;
+ struct mport_dma_req *req;
+ struct mport_dev *md = priv->md;
+ struct dma_chan *chan;
+ int ret;
+ int nents;
+
+ if (xfer->length == 0)
+ return -EINVAL;
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ ret = get_dma_channel(priv);
+ if (ret) {
+ kfree(req);
+ return ret;
+ }
+ chan = priv->dmach;
+
+ kref_init(&req->refcount);
+ init_completion(&req->req_comp);
+ req->dir = dir;
+ req->filp = filp;
+ req->priv = priv;
+ req->dmach = chan;
+ req->sync = sync;
+
+ /*
+ * If parameter loc_addr != NULL, we are transferring data from/to
+ * data buffer allocated in user-space: lock in memory user-space
+ * buffer pages and build an SG table for DMA transfer request
+ *
+ * Otherwise (loc_addr == NULL) contiguous kernel-space buffer is
+ * used for DMA data transfers: build single entry SG table using
+ * offset within the internal buffer specified by handle parameter.
+ */
+ if (xfer->loc_addr) {
+ unsigned int offset;
+ long pinned;
+
+ offset = lower_32_bits(offset_in_page(xfer->loc_addr));
+ nr_pages = PAGE_ALIGN(xfer->length + offset) >> PAGE_SHIFT;
+
+ page_list = kmalloc_array(nr_pages,
+ sizeof(*page_list), GFP_KERNEL);
+ if (page_list == NULL) {
+ ret = -ENOMEM;
+ goto err_req;
+ }
+
+ pinned = pin_user_pages_fast(
+ (unsigned long)xfer->loc_addr & PAGE_MASK,
+ nr_pages,
+ dir == DMA_FROM_DEVICE ? FOLL_WRITE : 0,
+ page_list);
+
+ if (pinned != nr_pages) {
+ if (pinned < 0) {
+ rmcd_error("pin_user_pages_fast err=%ld",
+ pinned);
+ nr_pages = 0;
+ } else {
+ rmcd_error("pinned %ld out of %ld pages",
+ pinned, nr_pages);
+ /*
+ * Set nr_pages up to mean "how many pages to unpin, in
+ * the error handler:
+ */
+ nr_pages = pinned;
+ }
+ ret = -EFAULT;
+ goto err_pg;
+ }
+
+ ret = sg_alloc_table_from_pages(&req->sgt, page_list, nr_pages,
+ offset, xfer->length, GFP_KERNEL);
+ if (ret) {
+ rmcd_error("sg_alloc_table failed with err=%d", ret);
+ goto err_pg;
+ }
+
+ req->page_list = page_list;
+ req->nr_pages = nr_pages;
+ } else {
+ dma_addr_t baddr;
+ struct rio_mport_mapping *map;
+
+ baddr = (dma_addr_t)xfer->handle;
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry(map, &md->mappings, node) {
+ if (baddr >= map->phys_addr &&
+ baddr < (map->phys_addr + map->size)) {
+ kref_get(&map->ref);
+ req->map = map;
+ break;
+ }
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ if (req->map == NULL) {
+ ret = -ENOMEM;
+ goto err_req;
+ }
+
+ if (xfer->length + xfer->offset > req->map->size) {
+ ret = -EINVAL;
+ goto err_req;
+ }
+
+ ret = sg_alloc_table(&req->sgt, 1, GFP_KERNEL);
+ if (unlikely(ret)) {
+ rmcd_error("sg_alloc_table failed for internal buf");
+ goto err_req;
+ }
+
+ sg_set_buf(req->sgt.sgl,
+ req->map->virt_addr + (baddr - req->map->phys_addr) +
+ xfer->offset, xfer->length);
+ }
+
+ nents = dma_map_sg(chan->device->dev,
+ req->sgt.sgl, req->sgt.nents, dir);
+ if (nents == 0) {
+ rmcd_error("Failed to map SG list");
+ ret = -EFAULT;
+ goto err_pg;
+ }
+
+ ret = do_dma_request(req, xfer, sync, nents);
+
+ if (ret >= 0) {
+ if (sync == RIO_TRANSFER_ASYNC)
+ return ret; /* return ASYNC cookie */
+ } else {
+ rmcd_debug(DMA, "do_dma_request failed with err=%d", ret);
+ }
+
+err_pg:
+ if (!req->page_list) {
+ unpin_user_pages(page_list, nr_pages);
+ kfree(page_list);
+ }
+err_req:
+ kref_put(&req->refcount, dma_req_free);
+ return ret;
+}
+
+static int rio_mport_transfer_ioctl(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct rio_transaction transaction;
+ struct rio_transfer_io *transfer;
+ enum dma_data_direction dir;
+ int i, ret = 0;
+ size_t size;
+
+ if (unlikely(copy_from_user(&transaction, arg, sizeof(transaction))))
+ return -EFAULT;
+
+ if (transaction.count != 1) /* only single transfer for now */
+ return -EINVAL;
+
+ if ((transaction.transfer_mode &
+ priv->md->properties.transfer_mode) == 0)
+ return -ENODEV;
+
+ size = array_size(sizeof(*transfer), transaction.count);
+ transfer = vmalloc(size);
+ if (!transfer)
+ return -ENOMEM;
+
+ if (unlikely(copy_from_user(transfer,
+ (void __user *)(uintptr_t)transaction.block,
+ size))) {
+ ret = -EFAULT;
+ goto out_free;
+ }
+
+ dir = (transaction.dir == RIO_TRANSFER_DIR_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ for (i = 0; i < transaction.count && ret == 0; i++)
+ ret = rio_dma_transfer(filp, transaction.transfer_mode,
+ transaction.sync, dir, &transfer[i]);
+
+ if (unlikely(copy_to_user((void __user *)(uintptr_t)transaction.block,
+ transfer, size)))
+ ret = -EFAULT;
+
+out_free:
+ vfree(transfer);
+
+ return ret;
+}
+
+static int rio_mport_wait_for_async_dma(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv;
+ struct rio_async_tx_wait w_param;
+ struct mport_dma_req *req;
+ dma_cookie_t cookie;
+ unsigned long tmo;
+ long wret;
+ int found = 0;
+ int ret;
+
+ priv = (struct mport_cdev_priv *)filp->private_data;
+
+ if (unlikely(copy_from_user(&w_param, arg, sizeof(w_param))))
+ return -EFAULT;
+
+ cookie = w_param.token;
+ if (w_param.timeout)
+ tmo = msecs_to_jiffies(w_param.timeout);
+ else /* Use default DMA timeout */
+ tmo = msecs_to_jiffies(dma_timeout);
+
+ spin_lock(&priv->req_lock);
+ list_for_each_entry(req, &priv->async_list, node) {
+ if (req->cookie == cookie) {
+ list_del(&req->node);
+ found = 1;
+ break;
+ }
+ }
+ spin_unlock(&priv->req_lock);
+
+ if (!found)
+ return -EAGAIN;
+
+ wret = wait_for_completion_interruptible_timeout(&req->req_comp, tmo);
+
+ if (wret == 0) {
+ /* Timeout on wait occurred */
+ rmcd_error("%s(%d) timed out waiting for ASYNC DMA_%s",
+ current->comm, task_pid_nr(current),
+ (req->dir == DMA_FROM_DEVICE)?"READ":"WRITE");
+ ret = -ETIMEDOUT;
+ goto err_tmo;
+ } else if (wret == -ERESTARTSYS) {
+ /* Wait_for_completion was interrupted by a signal but DMA may
+ * be still in progress
+ */
+ rmcd_error("%s(%d) wait for ASYNC DMA_%s was interrupted",
+ current->comm, task_pid_nr(current),
+ (req->dir == DMA_FROM_DEVICE)?"READ":"WRITE");
+ ret = -EINTR;
+ goto err_tmo;
+ }
+
+ if (req->status != DMA_COMPLETE) {
+ /* DMA transaction completion signaled with transfer error */
+ rmcd_error("%s(%d) ASYNC DMA_%s completion with status %d",
+ current->comm, task_pid_nr(current),
+ (req->dir == DMA_FROM_DEVICE)?"READ":"WRITE",
+ req->status);
+ ret = -EIO;
+ } else
+ ret = 0;
+
+ if (req->status != DMA_IN_PROGRESS && req->status != DMA_PAUSED)
+ kref_put(&req->refcount, dma_req_free);
+
+ return ret;
+
+err_tmo:
+ /* Return request back into async queue */
+ spin_lock(&priv->req_lock);
+ list_add_tail(&req->node, &priv->async_list);
+ spin_unlock(&priv->req_lock);
+ return ret;
+}
+
+static int rio_mport_create_dma_mapping(struct mport_dev *md, struct file *filp,
+ u64 size, struct rio_mport_mapping **mapping)
+{
+ struct rio_mport_mapping *map;
+
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
+ if (map == NULL)
+ return -ENOMEM;
+
+ map->virt_addr = dma_alloc_coherent(md->mport->dev.parent, size,
+ &map->phys_addr, GFP_KERNEL);
+ if (map->virt_addr == NULL) {
+ kfree(map);
+ return -ENOMEM;
+ }
+
+ map->dir = MAP_DMA;
+ map->size = size;
+ map->filp = filp;
+ map->md = md;
+ kref_init(&map->ref);
+ mutex_lock(&md->buf_mutex);
+ list_add_tail(&map->node, &md->mappings);
+ mutex_unlock(&md->buf_mutex);
+ *mapping = map;
+
+ return 0;
+}
+
+static int rio_mport_alloc_dma(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md = priv->md;
+ struct rio_dma_mem map;
+ struct rio_mport_mapping *mapping = NULL;
+ int ret;
+
+ if (unlikely(copy_from_user(&map, arg, sizeof(map))))
+ return -EFAULT;
+
+ ret = rio_mport_create_dma_mapping(md, filp, map.length, &mapping);
+ if (ret)
+ return ret;
+
+ map.dma_handle = mapping->phys_addr;
+
+ if (unlikely(copy_to_user(arg, &map, sizeof(map)))) {
+ mutex_lock(&md->buf_mutex);
+ kref_put(&mapping->ref, mport_release_mapping);
+ mutex_unlock(&md->buf_mutex);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int rio_mport_free_dma(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md = priv->md;
+ u64 handle;
+ int ret = -EFAULT;
+ struct rio_mport_mapping *map, *_map;
+
+ if (copy_from_user(&handle, arg, sizeof(handle)))
+ return -EFAULT;
+ rmcd_debug(EXIT, "filp=%p", filp);
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry_safe(map, _map, &md->mappings, node) {
+ if (map->dir == MAP_DMA && map->phys_addr == handle &&
+ map->filp == filp) {
+ kref_put(&map->ref, mport_release_mapping);
+ ret = 0;
+ break;
+ }
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ if (ret == -EFAULT) {
+ rmcd_debug(DMA, "ERR no matching mapping");
+ return ret;
+ }
+
+ return 0;
+}
+#else
+static int rio_mport_transfer_ioctl(struct file *filp, void *arg)
+{
+ return -ENODEV;
+}
+
+static int rio_mport_wait_for_async_dma(struct file *filp, void __user *arg)
+{
+ return -ENODEV;
+}
+
+static int rio_mport_alloc_dma(struct file *filp, void __user *arg)
+{
+ return -ENODEV;
+}
+
+static int rio_mport_free_dma(struct file *filp, void __user *arg)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+/*
+ * Inbound/outbound memory mapping functions
+ */
+
+static int
+rio_mport_create_inbound_mapping(struct mport_dev *md, struct file *filp,
+ u64 raddr, u64 size,
+ struct rio_mport_mapping **mapping)
+{
+ struct rio_mport *mport = md->mport;
+ struct rio_mport_mapping *map;
+ int ret;
+
+ /* rio_map_inb_region() accepts u32 size */
+ if (size > 0xffffffff)
+ return -EINVAL;
+
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
+ if (map == NULL)
+ return -ENOMEM;
+
+ map->virt_addr = dma_alloc_coherent(mport->dev.parent, size,
+ &map->phys_addr, GFP_KERNEL);
+ if (map->virt_addr == NULL) {
+ ret = -ENOMEM;
+ goto err_dma_alloc;
+ }
+
+ if (raddr == RIO_MAP_ANY_ADDR)
+ raddr = map->phys_addr;
+ ret = rio_map_inb_region(mport, map->phys_addr, raddr, (u32)size, 0);
+ if (ret < 0)
+ goto err_map_inb;
+
+ map->dir = MAP_INBOUND;
+ map->rio_addr = raddr;
+ map->size = size;
+ map->filp = filp;
+ map->md = md;
+ kref_init(&map->ref);
+ mutex_lock(&md->buf_mutex);
+ list_add_tail(&map->node, &md->mappings);
+ mutex_unlock(&md->buf_mutex);
+ *mapping = map;
+ return 0;
+
+err_map_inb:
+ dma_free_coherent(mport->dev.parent, size,
+ map->virt_addr, map->phys_addr);
+err_dma_alloc:
+ kfree(map);
+ return ret;
+}
+
+static int
+rio_mport_get_inbound_mapping(struct mport_dev *md, struct file *filp,
+ u64 raddr, u64 size,
+ struct rio_mport_mapping **mapping)
+{
+ struct rio_mport_mapping *map;
+ int err = -ENOMEM;
+
+ if (raddr == RIO_MAP_ANY_ADDR)
+ goto get_new;
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry(map, &md->mappings, node) {
+ if (map->dir != MAP_INBOUND)
+ continue;
+ if (raddr == map->rio_addr && size == map->size) {
+ /* allow exact match only */
+ *mapping = map;
+ err = 0;
+ break;
+ } else if (raddr < (map->rio_addr + map->size - 1) &&
+ (raddr + size) > map->rio_addr) {
+ err = -EBUSY;
+ break;
+ }
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ if (err != -ENOMEM)
+ return err;
+get_new:
+ /* not found, create new */
+ return rio_mport_create_inbound_mapping(md, filp, raddr, size, mapping);
+}
+
+static int rio_mport_map_inbound(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md = priv->md;
+ struct rio_mmap map;
+ struct rio_mport_mapping *mapping = NULL;
+ int ret;
+
+ if (!md->mport->ops->map_inb)
+ return -EPROTONOSUPPORT;
+ if (unlikely(copy_from_user(&map, arg, sizeof(map))))
+ return -EFAULT;
+
+ rmcd_debug(IBW, "%s filp=%p", dev_name(&priv->md->dev), filp);
+
+ ret = rio_mport_get_inbound_mapping(md, filp, map.rio_addr,
+ map.length, &mapping);
+ if (ret)
+ return ret;
+
+ map.handle = mapping->phys_addr;
+ map.rio_addr = mapping->rio_addr;
+
+ if (unlikely(copy_to_user(arg, &map, sizeof(map)))) {
+ /* Delete mapping if it was created by this request */
+ if (ret == 0 && mapping->filp == filp) {
+ mutex_lock(&md->buf_mutex);
+ kref_put(&mapping->ref, mport_release_mapping);
+ mutex_unlock(&md->buf_mutex);
+ }
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+/*
+ * rio_mport_inbound_free() - unmap from RapidIO address space and free
+ * previously allocated inbound DMA coherent buffer
+ * @priv: driver private data
+ * @arg: buffer handle returned by allocation routine
+ */
+static int rio_mport_inbound_free(struct file *filp, void __user *arg)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md = priv->md;
+ u64 handle;
+ struct rio_mport_mapping *map, *_map;
+
+ rmcd_debug(IBW, "%s filp=%p", dev_name(&priv->md->dev), filp);
+
+ if (!md->mport->ops->unmap_inb)
+ return -EPROTONOSUPPORT;
+
+ if (copy_from_user(&handle, arg, sizeof(handle)))
+ return -EFAULT;
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry_safe(map, _map, &md->mappings, node) {
+ if (map->dir == MAP_INBOUND && map->phys_addr == handle) {
+ if (map->filp == filp) {
+ map->filp = NULL;
+ kref_put(&map->ref, mport_release_mapping);
+ }
+ break;
+ }
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ return 0;
+}
+
+/*
+ * maint_port_idx_get() - Get the port index of the mport instance
+ * @priv: driver private data
+ * @arg: port index
+ */
+static int maint_port_idx_get(struct mport_cdev_priv *priv, void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ u32 port_idx = md->mport->index;
+
+ rmcd_debug(MPORT, "port_index=%d", port_idx);
+
+ if (copy_to_user(arg, &port_idx, sizeof(port_idx)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int rio_mport_add_event(struct mport_cdev_priv *priv,
+ struct rio_event *event)
+{
+ int overflow;
+
+ if (!(priv->event_mask & event->header))
+ return -EACCES;
+
+ spin_lock(&priv->fifo_lock);
+ overflow = kfifo_avail(&priv->event_fifo) < sizeof(*event)
+ || kfifo_in(&priv->event_fifo, (unsigned char *)event,
+ sizeof(*event)) != sizeof(*event);
+ spin_unlock(&priv->fifo_lock);
+
+ wake_up_interruptible(&priv->event_rx_wait);
+
+ if (overflow) {
+ dev_warn(&priv->md->dev, DRV_NAME ": event fifo overflow\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static void rio_mport_doorbell_handler(struct rio_mport *mport, void *dev_id,
+ u16 src, u16 dst, u16 info)
+{
+ struct mport_dev *data = dev_id;
+ struct mport_cdev_priv *priv;
+ struct rio_mport_db_filter *db_filter;
+ struct rio_event event;
+ int handled;
+
+ event.header = RIO_DOORBELL;
+ event.u.doorbell.rioid = src;
+ event.u.doorbell.payload = info;
+
+ handled = 0;
+ spin_lock(&data->db_lock);
+ list_for_each_entry(db_filter, &data->doorbells, data_node) {
+ if (((db_filter->filter.rioid == RIO_INVALID_DESTID ||
+ db_filter->filter.rioid == src)) &&
+ info >= db_filter->filter.low &&
+ info <= db_filter->filter.high) {
+ priv = db_filter->priv;
+ rio_mport_add_event(priv, &event);
+ handled = 1;
+ }
+ }
+ spin_unlock(&data->db_lock);
+
+ if (!handled)
+ dev_warn(&data->dev,
+ "%s: spurious DB received from 0x%x, info=0x%04x\n",
+ __func__, src, info);
+}
+
+static int rio_mport_add_db_filter(struct mport_cdev_priv *priv,
+ void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ struct rio_mport_db_filter *db_filter;
+ struct rio_doorbell_filter filter;
+ unsigned long flags;
+ int ret;
+
+ if (copy_from_user(&filter, arg, sizeof(filter)))
+ return -EFAULT;
+
+ if (filter.low > filter.high)
+ return -EINVAL;
+
+ ret = rio_request_inb_dbell(md->mport, md, filter.low, filter.high,
+ rio_mport_doorbell_handler);
+ if (ret) {
+ rmcd_error("%s failed to register IBDB, err=%d",
+ dev_name(&md->dev), ret);
+ return ret;
+ }
+
+ db_filter = kzalloc(sizeof(*db_filter), GFP_KERNEL);
+ if (db_filter == NULL) {
+ rio_release_inb_dbell(md->mport, filter.low, filter.high);
+ return -ENOMEM;
+ }
+
+ db_filter->filter = filter;
+ db_filter->priv = priv;
+ spin_lock_irqsave(&md->db_lock, flags);
+ list_add_tail(&db_filter->priv_node, &priv->db_filters);
+ list_add_tail(&db_filter->data_node, &md->doorbells);
+ spin_unlock_irqrestore(&md->db_lock, flags);
+
+ return 0;
+}
+
+static void rio_mport_delete_db_filter(struct rio_mport_db_filter *db_filter)
+{
+ list_del(&db_filter->data_node);
+ list_del(&db_filter->priv_node);
+ kfree(db_filter);
+}
+
+static int rio_mport_remove_db_filter(struct mport_cdev_priv *priv,
+ void __user *arg)
+{
+ struct rio_mport_db_filter *db_filter;
+ struct rio_doorbell_filter filter;
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (copy_from_user(&filter, arg, sizeof(filter)))
+ return -EFAULT;
+
+ if (filter.low > filter.high)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->md->db_lock, flags);
+ list_for_each_entry(db_filter, &priv->db_filters, priv_node) {
+ if (db_filter->filter.rioid == filter.rioid &&
+ db_filter->filter.low == filter.low &&
+ db_filter->filter.high == filter.high) {
+ rio_mport_delete_db_filter(db_filter);
+ ret = 0;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&priv->md->db_lock, flags);
+
+ if (!ret)
+ rio_release_inb_dbell(priv->md->mport, filter.low, filter.high);
+
+ return ret;
+}
+
+static int rio_mport_match_pw(union rio_pw_msg *msg,
+ struct rio_pw_filter *filter)
+{
+ if ((msg->em.comptag & filter->mask) < filter->low ||
+ (msg->em.comptag & filter->mask) > filter->high)
+ return 0;
+ return 1;
+}
+
+static int rio_mport_pw_handler(struct rio_mport *mport, void *context,
+ union rio_pw_msg *msg, int step)
+{
+ struct mport_dev *md = context;
+ struct mport_cdev_priv *priv;
+ struct rio_mport_pw_filter *pw_filter;
+ struct rio_event event;
+ int handled;
+
+ event.header = RIO_PORTWRITE;
+ memcpy(event.u.portwrite.payload, msg->raw, RIO_PW_MSG_SIZE);
+
+ handled = 0;
+ spin_lock(&md->pw_lock);
+ list_for_each_entry(pw_filter, &md->portwrites, md_node) {
+ if (rio_mport_match_pw(msg, &pw_filter->filter)) {
+ priv = pw_filter->priv;
+ rio_mport_add_event(priv, &event);
+ handled = 1;
+ }
+ }
+ spin_unlock(&md->pw_lock);
+
+ if (!handled) {
+ printk_ratelimited(KERN_WARNING DRV_NAME
+ ": mport%d received spurious PW from 0x%08x\n",
+ mport->id, msg->em.comptag);
+ }
+
+ return 0;
+}
+
+static int rio_mport_add_pw_filter(struct mport_cdev_priv *priv,
+ void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ struct rio_mport_pw_filter *pw_filter;
+ struct rio_pw_filter filter;
+ unsigned long flags;
+ int hadd = 0;
+
+ if (copy_from_user(&filter, arg, sizeof(filter)))
+ return -EFAULT;
+
+ pw_filter = kzalloc(sizeof(*pw_filter), GFP_KERNEL);
+ if (pw_filter == NULL)
+ return -ENOMEM;
+
+ pw_filter->filter = filter;
+ pw_filter->priv = priv;
+ spin_lock_irqsave(&md->pw_lock, flags);
+ if (list_empty(&md->portwrites))
+ hadd = 1;
+ list_add_tail(&pw_filter->priv_node, &priv->pw_filters);
+ list_add_tail(&pw_filter->md_node, &md->portwrites);
+ spin_unlock_irqrestore(&md->pw_lock, flags);
+
+ if (hadd) {
+ int ret;
+
+ ret = rio_add_mport_pw_handler(md->mport, md,
+ rio_mport_pw_handler);
+ if (ret) {
+ dev_err(&md->dev,
+ "%s: failed to add IB_PW handler, err=%d\n",
+ __func__, ret);
+ return ret;
+ }
+ rio_pw_enable(md->mport, 1);
+ }
+
+ return 0;
+}
+
+static void rio_mport_delete_pw_filter(struct rio_mport_pw_filter *pw_filter)
+{
+ list_del(&pw_filter->md_node);
+ list_del(&pw_filter->priv_node);
+ kfree(pw_filter);
+}
+
+static int rio_mport_match_pw_filter(struct rio_pw_filter *a,
+ struct rio_pw_filter *b)
+{
+ if ((a->mask == b->mask) && (a->low == b->low) && (a->high == b->high))
+ return 1;
+ return 0;
+}
+
+static int rio_mport_remove_pw_filter(struct mport_cdev_priv *priv,
+ void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ struct rio_mport_pw_filter *pw_filter;
+ struct rio_pw_filter filter;
+ unsigned long flags;
+ int ret = -EINVAL;
+ int hdel = 0;
+
+ if (copy_from_user(&filter, arg, sizeof(filter)))
+ return -EFAULT;
+
+ spin_lock_irqsave(&md->pw_lock, flags);
+ list_for_each_entry(pw_filter, &priv->pw_filters, priv_node) {
+ if (rio_mport_match_pw_filter(&pw_filter->filter, &filter)) {
+ rio_mport_delete_pw_filter(pw_filter);
+ ret = 0;
+ break;
+ }
+ }
+
+ if (list_empty(&md->portwrites))
+ hdel = 1;
+ spin_unlock_irqrestore(&md->pw_lock, flags);
+
+ if (hdel) {
+ rio_del_mport_pw_handler(md->mport, priv->md,
+ rio_mport_pw_handler);
+ rio_pw_enable(md->mport, 0);
+ }
+
+ return ret;
+}
+
+/*
+ * rio_release_dev - release routine for kernel RIO device object
+ * @dev: kernel device object associated with a RIO device structure
+ *
+ * Frees a RIO device struct associated a RIO device struct.
+ * The RIO device struct is freed.
+ */
+static void rio_release_dev(struct device *dev)
+{
+ struct rio_dev *rdev;
+
+ rdev = to_rio_dev(dev);
+ pr_info(DRV_PREFIX "%s: %s\n", __func__, rio_name(rdev));
+ kfree(rdev);
+}
+
+
+static void rio_release_net(struct device *dev)
+{
+ struct rio_net *net;
+
+ net = to_rio_net(dev);
+ rmcd_debug(RDEV, "net_%d", net->id);
+ kfree(net);
+}
+
+
+/*
+ * rio_mport_add_riodev - creates a kernel RIO device object
+ *
+ * Allocates a RIO device data structure and initializes required fields based
+ * on device's configuration space contents.
+ * If the device has switch capabilities, then a switch specific portion is
+ * allocated and configured.
+ */
+static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
+ void __user *arg)
+{
+ struct mport_dev *md = priv->md;
+ struct rio_rdev_info dev_info;
+ struct rio_dev *rdev;
+ struct rio_switch *rswitch = NULL;
+ struct rio_mport *mport;
+ struct device *dev;
+ size_t size;
+ u32 rval;
+ u32 swpinfo = 0;
+ u16 destid;
+ u8 hopcount;
+ int err;
+
+ if (copy_from_user(&dev_info, arg, sizeof(dev_info)))
+ return -EFAULT;
+ dev_info.name[sizeof(dev_info.name) - 1] = '\0';
+
+ rmcd_debug(RDEV, "name:%s ct:0x%x did:0x%x hc:0x%x", dev_info.name,
+ dev_info.comptag, dev_info.destid, dev_info.hopcount);
+
+ dev = bus_find_device_by_name(&rio_bus_type, NULL, dev_info.name);
+ if (dev) {
+ rmcd_debug(RDEV, "device %s already exists", dev_info.name);
+ put_device(dev);
+ return -EEXIST;
+ }
+
+ size = sizeof(*rdev);
+ mport = md->mport;
+ destid = dev_info.destid;
+ hopcount = dev_info.hopcount;
+
+ if (rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_PEF_CAR, &rval))
+ return -EIO;
+
+ if (rval & RIO_PEF_SWITCH) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &swpinfo);
+ size += struct_size(rswitch, nextdev, RIO_GET_TOTAL_PORTS(swpinfo));
+ }
+
+ rdev = kzalloc(size, GFP_KERNEL);
+ if (rdev == NULL)
+ return -ENOMEM;
+
+ if (mport->net == NULL) {
+ struct rio_net *net;
+
+ net = rio_alloc_net(mport);
+ if (!net) {
+ err = -ENOMEM;
+ rmcd_debug(RDEV, "failed to allocate net object");
+ goto cleanup;
+ }
+
+ net->id = mport->id;
+ net->hport = mport;
+ dev_set_name(&net->dev, "rnet_%d", net->id);
+ net->dev.parent = &mport->dev;
+ net->dev.release = rio_release_net;
+ err = rio_add_net(net);
+ if (err) {
+ rmcd_debug(RDEV, "failed to register net, err=%d", err);
+ kfree(net);
+ goto cleanup;
+ }
+ }
+
+ rdev->net = mport->net;
+ rdev->pef = rval;
+ rdev->swpinfo = swpinfo;
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_DEV_ID_CAR, &rval);
+ rdev->did = rval >> 16;
+ rdev->vid = rval & 0xffff;
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_DEV_INFO_CAR,
+ &rdev->device_rev);
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_ASM_ID_CAR,
+ &rval);
+ rdev->asm_did = rval >> 16;
+ rdev->asm_vid = rval & 0xffff;
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_ASM_INFO_CAR,
+ &rval);
+ rdev->asm_rev = rval >> 16;
+
+ if (rdev->pef & RIO_PEF_EXT_FEATURES) {
+ rdev->efptr = rval & 0xffff;
+ rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid,
+ hopcount, &rdev->phys_rmap);
+
+ rdev->em_efptr = rio_mport_get_feature(mport, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT);
+ }
+
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_SRC_OPS_CAR,
+ &rdev->src_ops);
+ rio_mport_read_config_32(mport, destid, hopcount, RIO_DST_OPS_CAR,
+ &rdev->dst_ops);
+
+ rdev->comp_tag = dev_info.comptag;
+ rdev->destid = destid;
+ /* hopcount is stored as specified by a caller, regardles of EP or SW */
+ rdev->hopcount = hopcount;
+
+ if (rdev->pef & RIO_PEF_SWITCH) {
+ rswitch = rdev->rswitch;
+ rswitch->route_table = NULL;
+ }
+
+ if (strlen(dev_info.name))
+ dev_set_name(&rdev->dev, "%s", dev_info.name);
+ else if (rdev->pef & RIO_PEF_SWITCH)
+ dev_set_name(&rdev->dev, "%02x:s:%04x", mport->id,
+ rdev->comp_tag & RIO_CTAG_UDEVID);
+ else
+ dev_set_name(&rdev->dev, "%02x:e:%04x", mport->id,
+ rdev->comp_tag & RIO_CTAG_UDEVID);
+
+ INIT_LIST_HEAD(&rdev->net_list);
+ rdev->dev.parent = &mport->net->dev;
+ rio_attach_device(rdev);
+ rdev->dev.release = rio_release_dev;
+
+ if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
+ rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
+ 0, 0xffff);
+ err = rio_add_device(rdev);
+ if (err) {
+ put_device(&rdev->dev);
+ return err;
+ }
+
+ rio_dev_get(rdev);
+
+ return 0;
+cleanup:
+ kfree(rdev);
+ return err;
+}
+
+static int rio_mport_del_riodev(struct mport_cdev_priv *priv, void __user *arg)
+{
+ struct rio_rdev_info dev_info;
+ struct rio_dev *rdev = NULL;
+ struct device *dev;
+ struct rio_mport *mport;
+ struct rio_net *net;
+
+ if (copy_from_user(&dev_info, arg, sizeof(dev_info)))
+ return -EFAULT;
+ dev_info.name[sizeof(dev_info.name) - 1] = '\0';
+
+ mport = priv->md->mport;
+
+ /* If device name is specified, removal by name has priority */
+ if (strlen(dev_info.name)) {
+ dev = bus_find_device_by_name(&rio_bus_type, NULL,
+ dev_info.name);
+ if (dev)
+ rdev = to_rio_dev(dev);
+ } else {
+ do {
+ rdev = rio_get_comptag(dev_info.comptag, rdev);
+ if (rdev && rdev->dev.parent == &mport->net->dev &&
+ rdev->destid == dev_info.destid &&
+ rdev->hopcount == dev_info.hopcount)
+ break;
+ } while (rdev);
+ }
+
+ if (!rdev) {
+ rmcd_debug(RDEV,
+ "device name:%s ct:0x%x did:0x%x hc:0x%x not found",
+ dev_info.name, dev_info.comptag, dev_info.destid,
+ dev_info.hopcount);
+ return -ENODEV;
+ }
+
+ net = rdev->net;
+ rio_dev_put(rdev);
+ rio_del_device(rdev, RIO_DEVICE_SHUTDOWN);
+
+ if (list_empty(&net->devices)) {
+ rio_free_net(net);
+ mport->net = NULL;
+ }
+
+ return 0;
+}
+
+/*
+ * Mport cdev management
+ */
+
+/*
+ * mport_cdev_open() - Open character device (mport)
+ */
+static int mport_cdev_open(struct inode *inode, struct file *filp)
+{
+ int ret;
+ int minor = iminor(inode);
+ struct mport_dev *chdev;
+ struct mport_cdev_priv *priv;
+
+ /* Test for valid device */
+ if (minor >= RIO_MAX_MPORTS) {
+ rmcd_error("Invalid minor device number");
+ return -EINVAL;
+ }
+
+ chdev = container_of(inode->i_cdev, struct mport_dev, cdev);
+
+ rmcd_debug(INIT, "%s filp=%p", dev_name(&chdev->dev), filp);
+
+ if (atomic_read(&chdev->active) == 0)
+ return -ENODEV;
+
+ get_device(&chdev->dev);
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ put_device(&chdev->dev);
+ return -ENOMEM;
+ }
+
+ priv->md = chdev;
+
+ INIT_LIST_HEAD(&priv->db_filters);
+ INIT_LIST_HEAD(&priv->pw_filters);
+ spin_lock_init(&priv->fifo_lock);
+ init_waitqueue_head(&priv->event_rx_wait);
+ ret = kfifo_alloc(&priv->event_fifo,
+ sizeof(struct rio_event) * MPORT_EVENT_DEPTH,
+ GFP_KERNEL);
+ if (ret < 0) {
+ put_device(&chdev->dev);
+ dev_err(&chdev->dev, DRV_NAME ": kfifo_alloc failed\n");
+ ret = -ENOMEM;
+ goto err_fifo;
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ INIT_LIST_HEAD(&priv->async_list);
+ spin_lock_init(&priv->req_lock);
+ mutex_init(&priv->dma_lock);
+#endif
+ mutex_lock(&chdev->file_mutex);
+ list_add_tail(&priv->list, &chdev->file_list);
+ mutex_unlock(&chdev->file_mutex);
+
+ filp->private_data = priv;
+ goto out;
+err_fifo:
+ kfree(priv);
+out:
+ return ret;
+}
+
+static int mport_cdev_fasync(int fd, struct file *filp, int mode)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+
+ return fasync_helper(fd, filp, mode, &priv->async_queue);
+}
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+static void mport_cdev_release_dma(struct file *filp)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md;
+ struct mport_dma_req *req, *req_next;
+ unsigned long tmo = msecs_to_jiffies(dma_timeout);
+ long wret;
+ LIST_HEAD(list);
+
+ rmcd_debug(EXIT, "from filp=%p %s(%d)",
+ filp, current->comm, task_pid_nr(current));
+
+ if (!priv->dmach) {
+ rmcd_debug(EXIT, "No DMA channel for filp=%p", filp);
+ return;
+ }
+
+ md = priv->md;
+
+ spin_lock(&priv->req_lock);
+ if (!list_empty(&priv->async_list)) {
+ rmcd_debug(EXIT, "async list not empty filp=%p %s(%d)",
+ filp, current->comm, task_pid_nr(current));
+ list_splice_init(&priv->async_list, &list);
+ }
+ spin_unlock(&priv->req_lock);
+
+ if (!list_empty(&list)) {
+ rmcd_debug(EXIT, "temp list not empty");
+ list_for_each_entry_safe(req, req_next, &list, node) {
+ rmcd_debug(EXIT, "free req->filp=%p cookie=%d compl=%s",
+ req->filp, req->cookie,
+ completion_done(&req->req_comp)?"yes":"no");
+ list_del(&req->node);
+ kref_put(&req->refcount, dma_req_free);
+ }
+ }
+
+ put_dma_channel(priv);
+ wret = wait_for_completion_interruptible_timeout(&priv->comp, tmo);
+
+ if (wret <= 0) {
+ rmcd_error("%s(%d) failed waiting for DMA release err=%ld",
+ current->comm, task_pid_nr(current), wret);
+ }
+
+ if (priv->dmach != priv->md->dma_chan) {
+ rmcd_debug(EXIT, "Release DMA channel for filp=%p %s(%d)",
+ filp, current->comm, task_pid_nr(current));
+ rio_release_dma(priv->dmach);
+ } else {
+ rmcd_debug(EXIT, "Adjust default DMA channel refcount");
+ kref_put(&md->dma_ref, mport_release_def_dma);
+ }
+
+ priv->dmach = NULL;
+}
+#else
+#define mport_cdev_release_dma(priv) do {} while (0)
+#endif
+
+/*
+ * mport_cdev_release() - Release character device
+ */
+static int mport_cdev_release(struct inode *inode, struct file *filp)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *chdev;
+ struct rio_mport_pw_filter *pw_filter, *pw_filter_next;
+ struct rio_mport_db_filter *db_filter, *db_filter_next;
+ struct rio_mport_mapping *map, *_map;
+ unsigned long flags;
+
+ rmcd_debug(EXIT, "%s filp=%p", dev_name(&priv->md->dev), filp);
+
+ chdev = priv->md;
+ mport_cdev_release_dma(filp);
+
+ priv->event_mask = 0;
+
+ spin_lock_irqsave(&chdev->pw_lock, flags);
+ if (!list_empty(&priv->pw_filters)) {
+ list_for_each_entry_safe(pw_filter, pw_filter_next,
+ &priv->pw_filters, priv_node)
+ rio_mport_delete_pw_filter(pw_filter);
+ }
+ spin_unlock_irqrestore(&chdev->pw_lock, flags);
+
+ spin_lock_irqsave(&chdev->db_lock, flags);
+ list_for_each_entry_safe(db_filter, db_filter_next,
+ &priv->db_filters, priv_node) {
+ rio_mport_delete_db_filter(db_filter);
+ }
+ spin_unlock_irqrestore(&chdev->db_lock, flags);
+
+ kfifo_free(&priv->event_fifo);
+
+ mutex_lock(&chdev->buf_mutex);
+ list_for_each_entry_safe(map, _map, &chdev->mappings, node) {
+ if (map->filp == filp) {
+ rmcd_debug(EXIT, "release mapping %p filp=%p",
+ map->virt_addr, filp);
+ kref_put(&map->ref, mport_release_mapping);
+ }
+ }
+ mutex_unlock(&chdev->buf_mutex);
+
+ mport_cdev_fasync(-1, filp, 0);
+ filp->private_data = NULL;
+ mutex_lock(&chdev->file_mutex);
+ list_del(&priv->list);
+ mutex_unlock(&chdev->file_mutex);
+ put_device(&chdev->dev);
+ kfree(priv);
+ return 0;
+}
+
+/*
+ * mport_cdev_ioctl() - IOCTLs for character device
+ */
+static long mport_cdev_ioctl(struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ int err = -EINVAL;
+ struct mport_cdev_priv *data = filp->private_data;
+ struct mport_dev *md = data->md;
+
+ if (atomic_read(&md->active) == 0)
+ return -ENODEV;
+
+ switch (cmd) {
+ case RIO_MPORT_MAINT_READ_LOCAL:
+ return rio_mport_maint_rd(data, (void __user *)arg, 1);
+ case RIO_MPORT_MAINT_WRITE_LOCAL:
+ return rio_mport_maint_wr(data, (void __user *)arg, 1);
+ case RIO_MPORT_MAINT_READ_REMOTE:
+ return rio_mport_maint_rd(data, (void __user *)arg, 0);
+ case RIO_MPORT_MAINT_WRITE_REMOTE:
+ return rio_mport_maint_wr(data, (void __user *)arg, 0);
+ case RIO_MPORT_MAINT_HDID_SET:
+ return maint_hdid_set(data, (void __user *)arg);
+ case RIO_MPORT_MAINT_COMPTAG_SET:
+ return maint_comptag_set(data, (void __user *)arg);
+ case RIO_MPORT_MAINT_PORT_IDX_GET:
+ return maint_port_idx_get(data, (void __user *)arg);
+ case RIO_MPORT_GET_PROPERTIES:
+ md->properties.hdid = md->mport->host_deviceid;
+ if (copy_to_user((void __user *)arg, &(md->properties),
+ sizeof(md->properties)))
+ return -EFAULT;
+ return 0;
+ case RIO_ENABLE_DOORBELL_RANGE:
+ return rio_mport_add_db_filter(data, (void __user *)arg);
+ case RIO_DISABLE_DOORBELL_RANGE:
+ return rio_mport_remove_db_filter(data, (void __user *)arg);
+ case RIO_ENABLE_PORTWRITE_RANGE:
+ return rio_mport_add_pw_filter(data, (void __user *)arg);
+ case RIO_DISABLE_PORTWRITE_RANGE:
+ return rio_mport_remove_pw_filter(data, (void __user *)arg);
+ case RIO_SET_EVENT_MASK:
+ data->event_mask = (u32)arg;
+ return 0;
+ case RIO_GET_EVENT_MASK:
+ if (copy_to_user((void __user *)arg, &data->event_mask,
+ sizeof(u32)))
+ return -EFAULT;
+ return 0;
+ case RIO_MAP_OUTBOUND:
+ return rio_mport_obw_map(filp, (void __user *)arg);
+ case RIO_MAP_INBOUND:
+ return rio_mport_map_inbound(filp, (void __user *)arg);
+ case RIO_UNMAP_OUTBOUND:
+ return rio_mport_obw_free(filp, (void __user *)arg);
+ case RIO_UNMAP_INBOUND:
+ return rio_mport_inbound_free(filp, (void __user *)arg);
+ case RIO_ALLOC_DMA:
+ return rio_mport_alloc_dma(filp, (void __user *)arg);
+ case RIO_FREE_DMA:
+ return rio_mport_free_dma(filp, (void __user *)arg);
+ case RIO_WAIT_FOR_ASYNC:
+ return rio_mport_wait_for_async_dma(filp, (void __user *)arg);
+ case RIO_TRANSFER:
+ return rio_mport_transfer_ioctl(filp, (void __user *)arg);
+ case RIO_DEV_ADD:
+ return rio_mport_add_riodev(data, (void __user *)arg);
+ case RIO_DEV_DEL:
+ return rio_mport_del_riodev(data, (void __user *)arg);
+ default:
+ break;
+ }
+
+ return err;
+}
+
+/*
+ * mport_release_mapping - free mapping resources and info structure
+ * @ref: a pointer to the kref within struct rio_mport_mapping
+ *
+ * NOTE: Shall be called while holding buf_mutex.
+ */
+static void mport_release_mapping(struct kref *ref)
+{
+ struct rio_mport_mapping *map =
+ container_of(ref, struct rio_mport_mapping, ref);
+ struct rio_mport *mport = map->md->mport;
+
+ rmcd_debug(MMAP, "type %d mapping @ %p (phys = %pad) for %s",
+ map->dir, map->virt_addr,
+ &map->phys_addr, mport->name);
+
+ list_del(&map->node);
+
+ switch (map->dir) {
+ case MAP_INBOUND:
+ rio_unmap_inb_region(mport, map->phys_addr);
+ fallthrough;
+ case MAP_DMA:
+ dma_free_coherent(mport->dev.parent, map->size,
+ map->virt_addr, map->phys_addr);
+ break;
+ case MAP_OUTBOUND:
+ rio_unmap_outb_region(mport, map->rioid, map->rio_addr);
+ break;
+ }
+ kfree(map);
+}
+
+static void mport_mm_open(struct vm_area_struct *vma)
+{
+ struct rio_mport_mapping *map = vma->vm_private_data;
+
+ rmcd_debug(MMAP, "%pad", &map->phys_addr);
+ kref_get(&map->ref);
+}
+
+static void mport_mm_close(struct vm_area_struct *vma)
+{
+ struct rio_mport_mapping *map = vma->vm_private_data;
+
+ rmcd_debug(MMAP, "%pad", &map->phys_addr);
+ mutex_lock(&map->md->buf_mutex);
+ kref_put(&map->ref, mport_release_mapping);
+ mutex_unlock(&map->md->buf_mutex);
+}
+
+static const struct vm_operations_struct vm_ops = {
+ .open = mport_mm_open,
+ .close = mport_mm_close,
+};
+
+static int mport_cdev_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct mport_dev *md;
+ size_t size = vma->vm_end - vma->vm_start;
+ dma_addr_t baddr;
+ unsigned long offset;
+ int found = 0, ret;
+ struct rio_mport_mapping *map;
+
+ rmcd_debug(MMAP, "0x%x bytes at offset 0x%lx",
+ (unsigned int)size, vma->vm_pgoff);
+
+ md = priv->md;
+ baddr = ((dma_addr_t)vma->vm_pgoff << PAGE_SHIFT);
+
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry(map, &md->mappings, node) {
+ if (baddr >= map->phys_addr &&
+ baddr < (map->phys_addr + map->size)) {
+ found = 1;
+ break;
+ }
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ if (!found)
+ return -ENOMEM;
+
+ offset = baddr - map->phys_addr;
+
+ if (size + offset > map->size)
+ return -EINVAL;
+
+ vma->vm_pgoff = offset >> PAGE_SHIFT;
+ rmcd_debug(MMAP, "MMAP adjusted offset = 0x%lx", vma->vm_pgoff);
+
+ if (map->dir == MAP_INBOUND || map->dir == MAP_DMA)
+ ret = dma_mmap_coherent(md->mport->dev.parent, vma,
+ map->virt_addr, map->phys_addr, map->size);
+ else if (map->dir == MAP_OUTBOUND) {
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ ret = vm_iomap_memory(vma, map->phys_addr, map->size);
+ } else {
+ rmcd_error("Attempt to mmap unsupported mapping type");
+ ret = -EIO;
+ }
+
+ if (!ret) {
+ vma->vm_private_data = map;
+ vma->vm_ops = &vm_ops;
+ mport_mm_open(vma);
+ } else {
+ rmcd_error("MMAP exit with err=%d", ret);
+ }
+
+ return ret;
+}
+
+static __poll_t mport_cdev_poll(struct file *filp, poll_table *wait)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+
+ poll_wait(filp, &priv->event_rx_wait, wait);
+ if (kfifo_len(&priv->event_fifo))
+ return EPOLLIN | EPOLLRDNORM;
+
+ return 0;
+}
+
+static ssize_t mport_read(struct file *filp, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ int copied;
+ ssize_t ret;
+
+ if (!count)
+ return 0;
+
+ if (kfifo_is_empty(&priv->event_fifo) &&
+ (filp->f_flags & O_NONBLOCK))
+ return -EAGAIN;
+
+ if (count % sizeof(struct rio_event))
+ return -EINVAL;
+
+ ret = wait_event_interruptible(priv->event_rx_wait,
+ kfifo_len(&priv->event_fifo) != 0);
+ if (ret)
+ return ret;
+
+ while (ret < count) {
+ if (kfifo_to_user(&priv->event_fifo, buf,
+ sizeof(struct rio_event), &copied))
+ return -EFAULT;
+ ret += copied;
+ buf += copied;
+ }
+
+ return ret;
+}
+
+static ssize_t mport_write(struct file *filp, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct mport_cdev_priv *priv = filp->private_data;
+ struct rio_mport *mport = priv->md->mport;
+ struct rio_event event;
+ int len, ret;
+
+ if (!count)
+ return 0;
+
+ if (count % sizeof(event))
+ return -EINVAL;
+
+ len = 0;
+ while ((count - len) >= (int)sizeof(event)) {
+ if (copy_from_user(&event, buf, sizeof(event)))
+ return -EFAULT;
+
+ if (event.header != RIO_DOORBELL)
+ return -EINVAL;
+
+ ret = rio_mport_send_doorbell(mport,
+ event.u.doorbell.rioid,
+ event.u.doorbell.payload);
+ if (ret < 0)
+ return ret;
+
+ len += sizeof(event);
+ buf += sizeof(event);
+ }
+
+ return len;
+}
+
+static const struct file_operations mport_fops = {
+ .owner = THIS_MODULE,
+ .open = mport_cdev_open,
+ .release = mport_cdev_release,
+ .poll = mport_cdev_poll,
+ .read = mport_read,
+ .write = mport_write,
+ .mmap = mport_cdev_mmap,
+ .fasync = mport_cdev_fasync,
+ .unlocked_ioctl = mport_cdev_ioctl
+};
+
+/*
+ * Character device management
+ */
+
+static void mport_device_release(struct device *dev)
+{
+ struct mport_dev *md;
+
+ rmcd_debug(EXIT, "%s", dev_name(dev));
+ md = container_of(dev, struct mport_dev, dev);
+ kfree(md);
+}
+
+/*
+ * mport_cdev_add() - Create mport_dev from rio_mport
+ * @mport: RapidIO master port
+ */
+static struct mport_dev *mport_cdev_add(struct rio_mport *mport)
+{
+ int ret = 0;
+ struct mport_dev *md;
+ struct rio_mport_attr attr;
+
+ md = kzalloc(sizeof(*md), GFP_KERNEL);
+ if (!md) {
+ rmcd_error("Unable allocate a device object");
+ return NULL;
+ }
+
+ md->mport = mport;
+ mutex_init(&md->buf_mutex);
+ mutex_init(&md->file_mutex);
+ INIT_LIST_HEAD(&md->file_list);
+
+ device_initialize(&md->dev);
+ md->dev.devt = MKDEV(MAJOR(dev_number), mport->id);
+ md->dev.class = dev_class;
+ md->dev.parent = &mport->dev;
+ md->dev.release = mport_device_release;
+ dev_set_name(&md->dev, DEV_NAME "%d", mport->id);
+ atomic_set(&md->active, 1);
+
+ cdev_init(&md->cdev, &mport_fops);
+ md->cdev.owner = THIS_MODULE;
+
+ INIT_LIST_HEAD(&md->doorbells);
+ spin_lock_init(&md->db_lock);
+ INIT_LIST_HEAD(&md->portwrites);
+ spin_lock_init(&md->pw_lock);
+ INIT_LIST_HEAD(&md->mappings);
+
+ md->properties.id = mport->id;
+ md->properties.sys_size = mport->sys_size;
+ md->properties.hdid = mport->host_deviceid;
+ md->properties.index = mport->index;
+
+ /* The transfer_mode property will be returned through mport query
+ * interface
+ */
+#ifdef CONFIG_FSL_RIO /* for now: only on Freescale's SoCs */
+ md->properties.transfer_mode |= RIO_TRANSFER_MODE_MAPPED;
+#else
+ md->properties.transfer_mode |= RIO_TRANSFER_MODE_TRANSFER;
+#endif
+
+ ret = cdev_device_add(&md->cdev, &md->dev);
+ if (ret) {
+ rmcd_error("Failed to register mport %d (err=%d)",
+ mport->id, ret);
+ goto err_cdev;
+ }
+ ret = rio_query_mport(mport, &attr);
+ if (!ret) {
+ md->properties.flags = attr.flags;
+ md->properties.link_speed = attr.link_speed;
+ md->properties.link_width = attr.link_width;
+ md->properties.dma_max_sge = attr.dma_max_sge;
+ md->properties.dma_max_size = attr.dma_max_size;
+ md->properties.dma_align = attr.dma_align;
+ md->properties.cap_sys_size = 0;
+ md->properties.cap_transfer_mode = 0;
+ md->properties.cap_addr_size = 0;
+ } else
+ pr_info(DRV_PREFIX "Failed to obtain info for %s cdev(%d:%d)\n",
+ mport->name, MAJOR(dev_number), mport->id);
+
+ mutex_lock(&mport_devs_lock);
+ list_add_tail(&md->node, &mport_devs);
+ mutex_unlock(&mport_devs_lock);
+
+ pr_info(DRV_PREFIX "Added %s cdev(%d:%d)\n",
+ mport->name, MAJOR(dev_number), mport->id);
+
+ return md;
+
+err_cdev:
+ put_device(&md->dev);
+ return NULL;
+}
+
+/*
+ * mport_cdev_terminate_dma() - Stop all active DMA data transfers and release
+ * associated DMA channels.
+ */
+static void mport_cdev_terminate_dma(struct mport_dev *md)
+{
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ struct mport_cdev_priv *client;
+
+ rmcd_debug(DMA, "%s", dev_name(&md->dev));
+
+ mutex_lock(&md->file_mutex);
+ list_for_each_entry(client, &md->file_list, list) {
+ if (client->dmach) {
+ dmaengine_terminate_all(client->dmach);
+ rio_release_dma(client->dmach);
+ }
+ }
+ mutex_unlock(&md->file_mutex);
+
+ if (md->dma_chan) {
+ dmaengine_terminate_all(md->dma_chan);
+ rio_release_dma(md->dma_chan);
+ md->dma_chan = NULL;
+ }
+#endif
+}
+
+
+/*
+ * mport_cdev_kill_fasync() - Send SIGIO signal to all processes with open
+ * mport_cdev files.
+ */
+static int mport_cdev_kill_fasync(struct mport_dev *md)
+{
+ unsigned int files = 0;
+ struct mport_cdev_priv *client;
+
+ mutex_lock(&md->file_mutex);
+ list_for_each_entry(client, &md->file_list, list) {
+ if (client->async_queue)
+ kill_fasync(&client->async_queue, SIGIO, POLL_HUP);
+ files++;
+ }
+ mutex_unlock(&md->file_mutex);
+ return files;
+}
+
+/*
+ * mport_cdev_remove() - Remove mport character device
+ * @dev: Mport device to remove
+ */
+static void mport_cdev_remove(struct mport_dev *md)
+{
+ struct rio_mport_mapping *map, *_map;
+
+ rmcd_debug(EXIT, "Remove %s cdev", md->mport->name);
+ atomic_set(&md->active, 0);
+ mport_cdev_terminate_dma(md);
+ rio_del_mport_pw_handler(md->mport, md, rio_mport_pw_handler);
+ cdev_device_del(&md->cdev, &md->dev);
+ mport_cdev_kill_fasync(md);
+
+ /* TODO: do we need to give clients some time to close file
+ * descriptors? Simple wait for XX, or kref?
+ */
+
+ /*
+ * Release DMA buffers allocated for the mport device.
+ * Disable associated inbound Rapidio requests mapping if applicable.
+ */
+ mutex_lock(&md->buf_mutex);
+ list_for_each_entry_safe(map, _map, &md->mappings, node) {
+ kref_put(&map->ref, mport_release_mapping);
+ }
+ mutex_unlock(&md->buf_mutex);
+
+ if (!list_empty(&md->mappings))
+ rmcd_warn("WARNING: %s pending mappings on removal",
+ md->mport->name);
+
+ rio_release_inb_dbell(md->mport, 0, 0x0fff);
+
+ put_device(&md->dev);
+}
+
+/*
+ * RIO rio_mport_interface driver
+ */
+
+/*
+ * mport_add_mport() - Add rio_mport from LDM device struct
+ * @dev: Linux device model struct
+ * @class_intf: Linux class_interface
+ */
+static int mport_add_mport(struct device *dev,
+ struct class_interface *class_intf)
+{
+ struct rio_mport *mport = NULL;
+ struct mport_dev *chdev = NULL;
+
+ mport = to_rio_mport(dev);
+ if (!mport)
+ return -ENODEV;
+
+ chdev = mport_cdev_add(mport);
+ if (!chdev)
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * mport_remove_mport() - Remove rio_mport from global list
+ * TODO remove device from global mport_dev list
+ */
+static void mport_remove_mport(struct device *dev,
+ struct class_interface *class_intf)
+{
+ struct rio_mport *mport = NULL;
+ struct mport_dev *chdev;
+ int found = 0;
+
+ mport = to_rio_mport(dev);
+ rmcd_debug(EXIT, "Remove %s", mport->name);
+
+ mutex_lock(&mport_devs_lock);
+ list_for_each_entry(chdev, &mport_devs, node) {
+ if (chdev->mport->id == mport->id) {
+ atomic_set(&chdev->active, 0);
+ list_del(&chdev->node);
+ found = 1;
+ break;
+ }
+ }
+ mutex_unlock(&mport_devs_lock);
+
+ if (found)
+ mport_cdev_remove(chdev);
+}
+
+/* the rio_mport_interface is used to handle local mport devices */
+static struct class_interface rio_mport_interface __refdata = {
+ .class = &rio_mport_class,
+ .add_dev = mport_add_mport,
+ .remove_dev = mport_remove_mport,
+};
+
+/*
+ * Linux kernel module
+ */
+
+/*
+ * mport_init - Driver module loading
+ */
+static int __init mport_init(void)
+{
+ int ret;
+
+ /* Create device class needed by udev */
+ dev_class = class_create(THIS_MODULE, DRV_NAME);
+ if (IS_ERR(dev_class)) {
+ rmcd_error("Unable to create " DRV_NAME " class");
+ return PTR_ERR(dev_class);
+ }
+
+ ret = alloc_chrdev_region(&dev_number, 0, RIO_MAX_MPORTS, DRV_NAME);
+ if (ret < 0)
+ goto err_chr;
+
+ rmcd_debug(INIT, "Registered class with major=%d", MAJOR(dev_number));
+
+ /* Register to rio_mport_interface */
+ ret = class_interface_register(&rio_mport_interface);
+ if (ret) {
+ rmcd_error("class_interface_register() failed, err=%d", ret);
+ goto err_cli;
+ }
+
+ return 0;
+
+err_cli:
+ unregister_chrdev_region(dev_number, RIO_MAX_MPORTS);
+err_chr:
+ class_destroy(dev_class);
+ return ret;
+}
+
+/**
+ * mport_exit - Driver module unloading
+ */
+static void __exit mport_exit(void)
+{
+ class_interface_unregister(&rio_mport_interface);
+ class_destroy(dev_class);
+ unregister_chrdev_region(dev_number, RIO_MAX_MPORTS);
+}
+
+module_init(mport_init);
+module_exit(mport_exit);
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
new file mode 100644
index 000000000..b3134744f
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721.c
@@ -0,0 +1,3002 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO mport driver for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright 2011 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ * Chul Kim <chul.kim@idt.com>
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+
+#include "tsi721.h"
+
+#ifdef DEBUG
+u32 tsi_dbg_level;
+module_param_named(dbg_level, tsi_dbg_level, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
+#endif
+
+static int pcie_mrrs = -1;
+module_param(pcie_mrrs, int, S_IRUGO);
+MODULE_PARM_DESC(pcie_mrrs, "PCIe MRRS override value (0...5)");
+
+static u8 mbox_sel = 0x0f;
+module_param(mbox_sel, byte, S_IRUGO);
+MODULE_PARM_DESC(mbox_sel,
+ "RIO Messaging MBOX Selection Mask (default: 0x0f = all)");
+
+static DEFINE_SPINLOCK(tsi721_maint_lock);
+
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch);
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch);
+
+/**
+ * tsi721_lcread - read from local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a local SREP space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcread(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ *data = ioread32(priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_lcwrite - write into local SREP config space
+ * @mport: RapidIO master port info
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a local write into SREP configuration space. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int tsi721_lcwrite(struct rio_mport *mport, int index, u32 offset,
+ int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ if (len != sizeof(u32))
+ return -EINVAL; /* only 32-bit access is supported */
+
+ iowrite32(data, priv->regs + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_maint_dma - Helper function to generate RapidIO maintenance
+ * transactions using designated Tsi721 DMA channel.
+ * @priv: pointer to tsi721 private data
+ * @sys_size: RapdiIO transport system size
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Location to be read from or write into
+ * @do_wr: Operation flag (1 == MAINT_WR)
+ *
+ * Generates a RapidIO maintenance transaction (Read or Write).
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_maint_dma(struct tsi721_device *priv, u32 sys_size,
+ u16 destid, u8 hopcount, u32 offset, int len,
+ u32 *data, int do_wr)
+{
+ void __iomem *regs = priv->regs + TSI721_DMAC_BASE(priv->mdma.ch_id);
+ struct tsi721_dma_desc *bd_ptr;
+ u32 rd_count, swr_ptr, ch_stat;
+ unsigned long flags;
+ int i, err = 0;
+ u32 op = do_wr ? MAINT_WR : MAINT_RD;
+
+ if (offset > (RIO_MAINT_SPACE_SZ - len) || (len != sizeof(u32)))
+ return -EINVAL;
+
+ spin_lock_irqsave(&tsi721_maint_lock, flags);
+
+ bd_ptr = priv->mdma.bd_base;
+
+ rd_count = ioread32(regs + TSI721_DMAC_DRDCNT);
+
+ /* Initialize DMA descriptor */
+ bd_ptr[0].type_id = cpu_to_le32((DTYPE2 << 29) | (op << 19) | destid);
+ bd_ptr[0].bcount = cpu_to_le32((sys_size << 26) | 0x04);
+ bd_ptr[0].raddr_lo = cpu_to_le32((hopcount << 24) | offset);
+ bd_ptr[0].raddr_hi = 0;
+ if (do_wr)
+ bd_ptr[0].data[0] = cpu_to_be32p(data);
+ else
+ bd_ptr[0].data[0] = 0xffffffff;
+
+ mb();
+
+ /* Start DMA operation */
+ iowrite32(rd_count + 2, regs + TSI721_DMAC_DWRCNT);
+ ioread32(regs + TSI721_DMAC_DWRCNT);
+ i = 0;
+
+ /* Wait until DMA transfer is finished */
+ while ((ch_stat = ioread32(regs + TSI721_DMAC_STS))
+ & TSI721_DMAC_STS_RUN) {
+ udelay(1);
+ if (++i >= 5000000) {
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "DMA[%d] read timeout ch_status=%x",
+ priv->mdma.ch_id, ch_stat);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+ }
+
+ if (ch_stat & TSI721_DMAC_STS_ABORT) {
+ /* If DMA operation aborted due to error,
+ * reinitialize DMA channel
+ */
+ tsi_debug(MAINT, &priv->pdev->dev, "DMA ABORT ch_stat=%x",
+ ch_stat);
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "OP=%d : destid=%x hc=%x off=%x",
+ do_wr ? MAINT_WR : MAINT_RD,
+ destid, hopcount, offset);
+ iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
+ iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+ udelay(10);
+ iowrite32(0, regs + TSI721_DMAC_DWRCNT);
+ udelay(1);
+ if (!do_wr)
+ *data = 0xffffffff;
+ err = -EIO;
+ goto err_out;
+ }
+
+ if (!do_wr)
+ *data = be32_to_cpu(bd_ptr[0].data[0]);
+
+ /*
+ * Update descriptor status FIFO RD pointer.
+ * NOTE: Skipping check and clear FIFO entries because we are waiting
+ * for transfer to be completed.
+ */
+ swr_ptr = ioread32(regs + TSI721_DMAC_DSWP);
+ iowrite32(swr_ptr, regs + TSI721_DMAC_DSRP);
+
+err_out:
+ spin_unlock_irqrestore(&tsi721_maint_lock, flags);
+
+ return err;
+}
+
+/**
+ * tsi721_cread_dma - Generate a RapidIO maintenance read transaction
+ * using Tsi721 BDMA engine.
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a RapidIO maintenance read transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cread_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 *data)
+{
+ struct tsi721_device *priv = mport->priv;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, data, 0);
+}
+
+/**
+ * tsi721_cwrite_dma - Generate a RapidIO maintenance write transaction
+ * using Tsi721 BDMA engine
+ * @mport: RapidIO master port control structure
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates a RapidIO maintenance write transaction.
+ * Returns %0 on success and %-EINVAL or %-EFAULT on failure.
+ */
+static int tsi721_cwrite_dma(struct rio_mport *mport, int index, u16 destid,
+ u8 hopcount, u32 offset, int len, u32 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 temp = data;
+
+ return tsi721_maint_dma(priv, mport->sys_size, destid, hopcount,
+ offset, len, &temp, 1);
+}
+
+/**
+ * tsi721_pw_handler - Tsi721 inbound port-write interrupt handler
+ * @priv: tsi721 device private structure
+ *
+ * Handles inbound port-write interrupts. Copies PW message from an internal
+ * buffer into PW message FIFO and schedules deferred routine to process
+ * queued messages.
+ */
+static int
+tsi721_pw_handler(struct tsi721_device *priv)
+{
+ u32 pw_stat;
+ u32 pw_buf[TSI721_RIO_PW_MSG_SIZE/sizeof(u32)];
+
+
+ pw_stat = ioread32(priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ if (pw_stat & TSI721_RIO_PW_RX_STAT_PW_VAL) {
+ pw_buf[0] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(0));
+ pw_buf[1] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(1));
+ pw_buf[2] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(2));
+ pw_buf[3] = ioread32(priv->regs + TSI721_RIO_PW_RX_CAPT(3));
+
+ /* Queue PW message (if there is room in FIFO),
+ * otherwise discard it.
+ */
+ spin_lock(&priv->pw_fifo_lock);
+ if (kfifo_avail(&priv->pw_fifo) >= TSI721_RIO_PW_MSG_SIZE)
+ kfifo_in(&priv->pw_fifo, pw_buf,
+ TSI721_RIO_PW_MSG_SIZE);
+ else
+ priv->pw_discard_count++;
+ spin_unlock(&priv->pw_fifo_lock);
+ }
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+
+ schedule_work(&priv->pw_work);
+
+ return 0;
+}
+
+static void tsi721_pw_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ pw_work);
+ union rio_pw_msg pwmsg;
+
+ /*
+ * Process port-write messages
+ */
+ while (kfifo_out_spinlocked(&priv->pw_fifo, (unsigned char *)&pwmsg,
+ TSI721_RIO_PW_MSG_SIZE, &priv->pw_fifo_lock)) {
+ /* Pass the port-write message to RIO core for processing */
+ rio_inb_pwrite_handler(&priv->mport, &pwmsg);
+ }
+}
+
+/**
+ * tsi721_pw_enable - enable/disable port-write interface init
+ * @mport: Master port implementing the port write unit
+ * @enable: 1=enable; 0=disable port-write message handling
+ */
+static int tsi721_pw_enable(struct rio_mport *mport, int enable)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rval;
+
+ rval = ioread32(priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ if (enable)
+ rval |= TSI721_RIO_EM_INT_ENABLE_PW_RX;
+ else
+ rval &= ~TSI721_RIO_EM_INT_ENABLE_PW_RX;
+
+ /* Clear pending PW interrupts */
+ iowrite32(TSI721_RIO_PW_RX_STAT_PW_DISC | TSI721_RIO_PW_RX_STAT_PW_VAL,
+ priv->regs + TSI721_RIO_PW_RX_STAT);
+ /* Update enable bits */
+ iowrite32(rval, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+
+ return 0;
+}
+
+/**
+ * tsi721_dsend - Send a RapidIO doorbell
+ * @mport: RapidIO master port info
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell
+ *
+ * Sends a RapidIO doorbell message. Always returns %0.
+ */
+static int tsi721_dsend(struct rio_mport *mport, int index,
+ u16 destid, u16 data)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 offset;
+
+ offset = (((mport->sys_size) ? RIO_TT_CODE_16 : RIO_TT_CODE_8) << 18) |
+ (destid << 2);
+
+ tsi_debug(DBELL, &priv->pdev->dev,
+ "Send Doorbell 0x%04x to destID 0x%x", data, destid);
+ iowrite16be(data, priv->odb_base + offset);
+
+ return 0;
+}
+
+/**
+ * tsi721_dbell_handler - Tsi721 doorbell interrupt handler
+ * @priv: tsi721 device-specific data structure
+ *
+ * Handles inbound doorbell interrupts. Copies doorbell entry from an internal
+ * buffer into DB message FIFO and schedules deferred routine to process
+ * queued DBs.
+ */
+static int
+tsi721_dbell_handler(struct tsi721_device *priv)
+{
+ u32 regval;
+
+ /* Disable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval &= ~TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ schedule_work(&priv->idb_work);
+
+ return 0;
+}
+
+static void tsi721_db_dpc(struct work_struct *work)
+{
+ struct tsi721_device *priv = container_of(work, struct tsi721_device,
+ idb_work);
+ struct rio_mport *mport;
+ struct rio_dbell *dbell;
+ int found = 0;
+ u32 wr_ptr, rd_ptr;
+ u64 *idb_entry;
+ u32 regval;
+ union {
+ u64 msg;
+ u8 bytes[8];
+ } idb;
+
+ /*
+ * Process queued inbound doorbells
+ */
+ mport = &priv->mport;
+
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ rd_ptr = ioread32(priv->regs + TSI721_IDQ_RP(IDB_QUEUE)) % IDB_QSIZE;
+
+ while (wr_ptr != rd_ptr) {
+ idb_entry = (u64 *)(priv->idb_base +
+ (TSI721_IDB_ENTRY_SIZE * rd_ptr));
+ rd_ptr++;
+ rd_ptr %= IDB_QSIZE;
+ idb.msg = *idb_entry;
+ *idb_entry = 0;
+
+ /* Process one doorbell */
+ list_for_each_entry(dbell, &mport->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(idb.bytes)) &&
+ (dbell->res->end >= DBELL_INF(idb.bytes))) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ dbell->dinb(mport, dbell->dev_id, DBELL_SID(idb.bytes),
+ DBELL_TID(idb.bytes), DBELL_INF(idb.bytes));
+ } else {
+ tsi_debug(DBELL, &priv->pdev->dev,
+ "spurious IDB sid %2.2x tid %2.2x info %4.4x",
+ DBELL_SID(idb.bytes), DBELL_TID(idb.bytes),
+ DBELL_INF(idb.bytes));
+ }
+
+ wr_ptr = ioread32(priv->regs +
+ TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ }
+
+ iowrite32(rd_ptr & (IDB_QSIZE - 1),
+ priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ /* Re-enable IDB interrupts */
+ regval = ioread32(priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+ regval |= TSI721_SR_CHINT_IDBQRCV;
+ iowrite32(regval,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ wr_ptr = ioread32(priv->regs + TSI721_IDQ_WP(IDB_QUEUE)) % IDB_QSIZE;
+ if (wr_ptr != rd_ptr)
+ schedule_work(&priv->idb_work);
+}
+
+/**
+ * tsi721_irqhandler - Tsi721 interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles Tsi721 interrupts signaled using MSI and INTA. Checks reported
+ * interrupt events and calls an event-specific handler(s).
+ */
+static irqreturn_t tsi721_irqhandler(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ u32 dev_int;
+ u32 dev_ch_int;
+ u32 intval;
+ u32 ch_inte;
+
+ /* For MSI mode disable all device-level interrupts */
+ if (priv->flags & TSI721_USING_MSI)
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+ dev_int = ioread32(priv->regs + TSI721_DEV_INT);
+ if (!dev_int)
+ return IRQ_NONE;
+
+ dev_ch_int = ioread32(priv->regs + TSI721_DEV_CHAN_INT);
+
+ if (dev_int & TSI721_DEV_INT_SR2PC_CH) {
+ /* Service SR2PC Channel interrupts */
+ if (dev_ch_int & TSI721_INT_SR2PC_CHAN(IDB_QUEUE)) {
+ /* Service Inbound Doorbell interrupt */
+ intval = ioread32(priv->regs +
+ TSI721_SR_CHINT(IDB_QUEUE));
+ if (intval & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler(priv);
+ else
+ tsi_info(&priv->pdev->dev,
+ "Unsupported SR_CH_INT %x", intval);
+
+ /* Clear interrupts */
+ iowrite32(intval,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SMSG_CH) {
+ int ch;
+
+ /*
+ * Service channel interrupts from Messaging Engine
+ */
+
+ if (dev_ch_int & TSI721_INT_IMSG_CHAN_M) { /* Inbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_IMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Inbound Message interrupt for each MBOX
+ */
+ for (ch = 4; ch < RIO_MAX_MBOX + 4; ch++) {
+ if (!(dev_ch_int & TSI721_INT_IMSG_CHAN(ch)))
+ continue;
+ tsi721_imsg_handler(priv, ch);
+ }
+ }
+
+ if (dev_ch_int & TSI721_INT_OMSG_CHAN_M) { /* Outbound Msg */
+ /* Disable signaled OB MSG Channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte &= ~(dev_ch_int & TSI721_INT_OMSG_CHAN_M);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /*
+ * Process Outbound Message interrupts for each MBOX
+ */
+
+ for (ch = 0; ch < RIO_MAX_MBOX; ch++) {
+ if (!(dev_ch_int & TSI721_INT_OMSG_CHAN(ch)))
+ continue;
+ tsi721_omsg_handler(priv, ch);
+ }
+ }
+ }
+
+ if (dev_int & TSI721_DEV_INT_SRIO) {
+ /* Service SRIO MAC interrupts */
+ intval = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (intval & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler(priv);
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ if (dev_int & TSI721_DEV_INT_BDMA_CH) {
+ int ch;
+
+ if (dev_ch_int & TSI721_INT_BDMA_CHAN_M) {
+ tsi_debug(DMA, &priv->pdev->dev,
+ "IRQ from DMA channel 0x%08x", dev_ch_int);
+
+ for (ch = 0; ch < TSI721_DMA_MAXCH; ch++) {
+ if (!(dev_ch_int & TSI721_INT_BDMA_CHAN(ch)))
+ continue;
+ tsi721_bdma_handler(&priv->bdma[ch]);
+ }
+ }
+ }
+#endif
+
+ /* For MSI mode re-enable device-level interrupts */
+ if (priv->flags & TSI721_USING_MSI) {
+ dev_int = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+ iowrite32(dev_int, priv->regs + TSI721_DEV_INTE);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void tsi721_interrupts_init(struct tsi721_device *priv)
+{
+ u32 intr;
+
+ /* Enable IDB interrupts */
+ iowrite32(TSI721_SR_CHINT_ALL,
+ priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ iowrite32(TSI721_SR_CHINT_IDBQRCV,
+ priv->regs + TSI721_SR_CHINTE(IDB_QUEUE));
+
+ /* Enable SRIO MAC interrupts */
+ iowrite32(TSI721_RIO_EM_DEV_INT_EN_INT,
+ priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+
+ /* Enable interrupts from channels in use */
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE) |
+ (TSI721_INT_BDMA_CHAN_M &
+ ~TSI721_INT_BDMA_CHAN(TSI721_DMACH_MAINT));
+#else
+ intr = TSI721_INT_SR2PC_CHAN(IDB_QUEUE);
+#endif
+ iowrite32(intr, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ if (priv->flags & TSI721_USING_MSIX)
+ intr = TSI721_DEV_INT_SRIO;
+ else
+ intr = TSI721_DEV_INT_SR2PC_CH | TSI721_DEV_INT_SRIO |
+ TSI721_DEV_INT_SMSG_CH | TSI721_DEV_INT_BDMA_CH;
+
+ iowrite32(intr, priv->regs + TSI721_DEV_INTE);
+ ioread32(priv->regs + TSI721_DEV_INTE);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for outbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles outbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_omsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_OMB0_DONE].vector) % RIO_MAX_MBOX;
+ tsi721_omsg_handler(priv, mbox);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_imsg_msix - MSI-X interrupt handler for inbound messaging
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles inbound messaging interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_imsg_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ int mbox;
+
+ mbox = (irq - priv->msix[TSI721_VECT_IMB0_RCV].vector) % RIO_MAX_MBOX;
+ tsi721_imsg_handler(priv, mbox + 4);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_srio_msix - Tsi721 MSI-X SRIO MAC interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles Tsi721 interrupts from SRIO MAC.
+ */
+static irqreturn_t tsi721_srio_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ u32 srio_int;
+
+ /* Service SRIO MAC interrupts */
+ srio_int = ioread32(priv->regs + TSI721_RIO_EM_INT_STAT);
+ if (srio_int & TSI721_RIO_EM_INT_STAT_PW_RX)
+ tsi721_pw_handler(priv);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_sr2pc_ch_msix - Tsi721 MSI-X SR2PC Channel interrupt handler
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (tsi721_device structure)
+ *
+ * Handles Tsi721 interrupts from SR2PC Channel.
+ * NOTE: At this moment services only one SR2PC channel associated with inbound
+ * doorbells.
+ */
+static irqreturn_t tsi721_sr2pc_ch_msix(int irq, void *ptr)
+{
+ struct tsi721_device *priv = (struct tsi721_device *)ptr;
+ u32 sr_ch_int;
+
+ /* Service Inbound DB interrupt from SR2PC channel */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ if (sr_ch_int & TSI721_SR_CHINT_IDBQRCV)
+ tsi721_dbell_handler(priv);
+
+ /* Clear interrupts */
+ iowrite32(sr_ch_int, priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+ /* Read back to ensure that interrupt was cleared */
+ sr_ch_int = ioread32(priv->regs + TSI721_SR_CHINT(IDB_QUEUE));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * tsi721_request_msix - register interrupt service for MSI-X mode.
+ * @priv: tsi721 device-specific data structure
+ *
+ * Registers MSI-X interrupt service routines for interrupts that are active
+ * immediately after mport initialization. Messaging interrupt service routines
+ * should be registered during corresponding open requests.
+ */
+static int tsi721_request_msix(struct tsi721_device *priv)
+{
+ int err = 0;
+
+ err = request_irq(priv->msix[TSI721_VECT_IDB].vector,
+ tsi721_sr2pc_ch_msix, 0,
+ priv->msix[TSI721_VECT_IDB].irq_name, (void *)priv);
+ if (err)
+ return err;
+
+ err = request_irq(priv->msix[TSI721_VECT_PWRX].vector,
+ tsi721_srio_msix, 0,
+ priv->msix[TSI721_VECT_PWRX].irq_name, (void *)priv);
+ if (err) {
+ free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * tsi721_enable_msix - Attempts to enable MSI-X support for Tsi721.
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures MSI-X support for Tsi721. Supports only an exact number
+ * of requested vectors.
+ */
+static int tsi721_enable_msix(struct tsi721_device *priv)
+{
+ struct msix_entry entries[TSI721_VECT_MAX];
+ int err;
+ int i;
+
+ entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
+ entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;
+
+ /*
+ * Initialize MSI-X entries for Messaging Engine:
+ * this driver supports four RIO mailboxes (inbound and outbound)
+ * NOTE: Inbound message MBOX 0...4 use IB channels 4...7. Therefore
+ * offset +4 is added to IB MBOX number.
+ */
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ entries[TSI721_VECT_IMB0_RCV + i].entry =
+ TSI721_MSIX_IMSG_DQ_RCV(i + 4);
+ entries[TSI721_VECT_IMB0_INT + i].entry =
+ TSI721_MSIX_IMSG_INT(i + 4);
+ entries[TSI721_VECT_OMB0_DONE + i].entry =
+ TSI721_MSIX_OMSG_DONE(i);
+ entries[TSI721_VECT_OMB0_INT + i].entry =
+ TSI721_MSIX_OMSG_INT(i);
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ /*
+ * Initialize MSI-X entries for Block DMA Engine:
+ * this driver supports XXX DMA channels
+ * (one is reserved for SRIO maintenance transactions)
+ */
+ for (i = 0; i < TSI721_DMA_CHNUM; i++) {
+ entries[TSI721_VECT_DMA0_DONE + i].entry =
+ TSI721_MSIX_DMACH_DONE(i);
+ entries[TSI721_VECT_DMA0_INT + i].entry =
+ TSI721_MSIX_DMACH_INT(i);
+ }
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+ err = pci_enable_msix_exact(priv->pdev, entries, ARRAY_SIZE(entries));
+ if (err) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to enable MSI-X (err=%d)", err);
+ return err;
+ }
+
+ /*
+ * Copy MSI-X vector information into tsi721 private structure
+ */
+ priv->msix[TSI721_VECT_IDB].vector = entries[TSI721_VECT_IDB].vector;
+ snprintf(priv->msix[TSI721_VECT_IDB].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-idb@pci:%s", pci_name(priv->pdev));
+ priv->msix[TSI721_VECT_PWRX].vector = entries[TSI721_VECT_PWRX].vector;
+ snprintf(priv->msix[TSI721_VECT_PWRX].irq_name, IRQ_DEVICE_NAME_MAX,
+ DRV_NAME "-pwrx@pci:%s", pci_name(priv->pdev));
+
+ for (i = 0; i < RIO_MAX_MBOX; i++) {
+ priv->msix[TSI721_VECT_IMB0_RCV + i].vector =
+ entries[TSI721_VECT_IMB0_RCV + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_RCV + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbr%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_IMB0_INT + i].vector =
+ entries[TSI721_VECT_IMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_IMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-imbi%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_DONE + i].vector =
+ entries[TSI721_VECT_OMB0_DONE + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_DONE + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombd%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_OMB0_INT + i].vector =
+ entries[TSI721_VECT_OMB0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_OMB0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-ombi%d@pci:%s",
+ i, pci_name(priv->pdev));
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ for (i = 0; i < TSI721_DMA_CHNUM; i++) {
+ priv->msix[TSI721_VECT_DMA0_DONE + i].vector =
+ entries[TSI721_VECT_DMA0_DONE + i].vector;
+ snprintf(priv->msix[TSI721_VECT_DMA0_DONE + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmad%d@pci:%s",
+ i, pci_name(priv->pdev));
+
+ priv->msix[TSI721_VECT_DMA0_INT + i].vector =
+ entries[TSI721_VECT_DMA0_INT + i].vector;
+ snprintf(priv->msix[TSI721_VECT_DMA0_INT + i].irq_name,
+ IRQ_DEVICE_NAME_MAX, DRV_NAME "-dmai%d@pci:%s",
+ i, pci_name(priv->pdev));
+ }
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+ return 0;
+}
+#endif /* CONFIG_PCI_MSI */
+
+static int tsi721_request_irq(struct tsi721_device *priv)
+{
+ int err;
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX)
+ err = tsi721_request_msix(priv);
+ else
+#endif
+ err = request_irq(priv->pdev->irq, tsi721_irqhandler,
+ (priv->flags & TSI721_USING_MSI) ? 0 : IRQF_SHARED,
+ DRV_NAME, (void *)priv);
+
+ if (err)
+ tsi_err(&priv->pdev->dev,
+ "Unable to allocate interrupt, err=%d", err);
+
+ return err;
+}
+
+static void tsi721_free_irq(struct tsi721_device *priv)
+{
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_IDB].vector, (void *)priv);
+ free_irq(priv->msix[TSI721_VECT_PWRX].vector, (void *)priv);
+ } else
+#endif
+ free_irq(priv->pdev->irq, (void *)priv);
+}
+
+static int
+tsi721_obw_alloc(struct tsi721_device *priv, struct tsi721_obw_bar *pbar,
+ u32 size, int *win_id)
+{
+ u64 win_base;
+ u64 bar_base;
+ u64 bar_end;
+ u32 align;
+ struct tsi721_ob_win *win;
+ struct tsi721_ob_win *new_win = NULL;
+ int new_win_idx = -1;
+ int i = 0;
+
+ bar_base = pbar->base;
+ bar_end = bar_base + pbar->size;
+ win_base = bar_base;
+ align = size/TSI721_PC2SR_ZONES;
+
+ while (i < TSI721_IBWIN_NUM) {
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ if (!priv->ob_win[i].active) {
+ if (new_win == NULL) {
+ new_win = &priv->ob_win[i];
+ new_win_idx = i;
+ }
+ continue;
+ }
+
+ /*
+ * If this window belongs to the current BAR check it
+ * for overlap
+ */
+ win = &priv->ob_win[i];
+
+ if (win->base >= bar_base && win->base < bar_end) {
+ if (win_base < (win->base + win->size) &&
+ (win_base + size) > win->base) {
+ /* Overlap detected */
+ win_base = win->base + win->size;
+ win_base = ALIGN(win_base, align);
+ break;
+ }
+ }
+ }
+ }
+
+ if (win_base + size > bar_end)
+ return -ENOMEM;
+
+ if (!new_win) {
+ tsi_err(&priv->pdev->dev, "OBW count tracking failed");
+ return -EIO;
+ }
+
+ new_win->active = true;
+ new_win->base = win_base;
+ new_win->size = size;
+ new_win->pbar = pbar;
+ priv->obwin_cnt--;
+ pbar->free -= size;
+ *win_id = new_win_idx;
+ return 0;
+}
+
+static int tsi721_map_outb_win(struct rio_mport *mport, u16 destid, u64 rstart,
+ u32 size, u32 flags, dma_addr_t *laddr)
+{
+ struct tsi721_device *priv = mport->priv;
+ int i;
+ struct tsi721_obw_bar *pbar;
+ struct tsi721_ob_win *ob_win;
+ int obw = -1;
+ u32 rval;
+ u64 rio_addr;
+ u32 zsize;
+ int ret = -ENOMEM;
+
+ tsi_debug(OBW, &priv->pdev->dev,
+ "did=%d ra=0x%llx sz=0x%x", destid, rstart, size);
+
+ if (!is_power_of_2(size) || (size < 0x8000) || (rstart & (size - 1)))
+ return -EINVAL;
+
+ if (priv->obwin_cnt == 0)
+ return -EBUSY;
+
+ for (i = 0; i < 2; i++) {
+ if (priv->p2r_bar[i].free >= size) {
+ pbar = &priv->p2r_bar[i];
+ ret = tsi721_obw_alloc(priv, pbar, size, &obw);
+ if (!ret)
+ break;
+ }
+ }
+
+ if (ret)
+ return ret;
+
+ WARN_ON(obw == -1);
+ ob_win = &priv->ob_win[obw];
+ ob_win->destid = destid;
+ ob_win->rstart = rstart;
+ tsi_debug(OBW, &priv->pdev->dev,
+ "allocated OBW%d @%llx", obw, ob_win->base);
+
+ /*
+ * Configure Outbound Window
+ */
+
+ zsize = size/TSI721_PC2SR_ZONES;
+ rio_addr = rstart;
+
+ /*
+ * Program Address Translation Zones:
+ * This implementation uses all 8 zones associated wit window.
+ */
+ for (i = 0; i < TSI721_PC2SR_ZONES; i++) {
+
+ while (ioread32(priv->regs + TSI721_ZONE_SEL) &
+ TSI721_ZONE_SEL_GO) {
+ udelay(1);
+ }
+
+ rval = (u32)(rio_addr & TSI721_LUT_DATA0_ADD) |
+ TSI721_LUT_DATA0_NREAD | TSI721_LUT_DATA0_NWR;
+ iowrite32(rval, priv->regs + TSI721_LUT_DATA0);
+ rval = (u32)(rio_addr >> 32);
+ iowrite32(rval, priv->regs + TSI721_LUT_DATA1);
+ rval = destid;
+ iowrite32(rval, priv->regs + TSI721_LUT_DATA2);
+
+ rval = TSI721_ZONE_SEL_GO | (obw << 3) | i;
+ iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
+
+ rio_addr += zsize;
+ }
+
+ iowrite32(TSI721_OBWIN_SIZE(size) << 8,
+ priv->regs + TSI721_OBWINSZ(obw));
+ iowrite32((u32)(ob_win->base >> 32), priv->regs + TSI721_OBWINUB(obw));
+ iowrite32((u32)(ob_win->base & TSI721_OBWINLB_BA) | TSI721_OBWINLB_WEN,
+ priv->regs + TSI721_OBWINLB(obw));
+
+ *laddr = ob_win->base;
+ return 0;
+}
+
+static void tsi721_unmap_outb_win(struct rio_mport *mport,
+ u16 destid, u64 rstart)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_ob_win *ob_win;
+ int i;
+
+ tsi_debug(OBW, &priv->pdev->dev, "did=%d ra=0x%llx", destid, rstart);
+
+ for (i = 0; i < TSI721_OBWIN_NUM; i++) {
+ ob_win = &priv->ob_win[i];
+
+ if (ob_win->active &&
+ ob_win->destid == destid && ob_win->rstart == rstart) {
+ tsi_debug(OBW, &priv->pdev->dev,
+ "free OBW%d @%llx", i, ob_win->base);
+ ob_win->active = false;
+ iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+ ob_win->pbar->free += ob_win->size;
+ priv->obwin_cnt++;
+ break;
+ }
+ }
+}
+
+/**
+ * tsi721_init_pc2sr_mapping - initializes outbound (PCIe->SRIO)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables SREP translation regions.
+ */
+static void tsi721_init_pc2sr_mapping(struct tsi721_device *priv)
+{
+ int i, z;
+ u32 rval;
+
+ /* Disable all PC2SR translation windows */
+ for (i = 0; i < TSI721_OBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_OBWINLB(i));
+
+ /* Initialize zone lookup tables to avoid ECC errors on reads */
+ iowrite32(0, priv->regs + TSI721_LUT_DATA0);
+ iowrite32(0, priv->regs + TSI721_LUT_DATA1);
+ iowrite32(0, priv->regs + TSI721_LUT_DATA2);
+
+ for (i = 0; i < TSI721_OBWIN_NUM; i++) {
+ for (z = 0; z < TSI721_PC2SR_ZONES; z++) {
+ while (ioread32(priv->regs + TSI721_ZONE_SEL) &
+ TSI721_ZONE_SEL_GO) {
+ udelay(1);
+ }
+ rval = TSI721_ZONE_SEL_GO | (i << 3) | z;
+ iowrite32(rval, priv->regs + TSI721_ZONE_SEL);
+ }
+ }
+
+ if (priv->p2r_bar[0].size == 0 && priv->p2r_bar[1].size == 0) {
+ priv->obwin_cnt = 0;
+ return;
+ }
+
+ priv->p2r_bar[0].free = priv->p2r_bar[0].size;
+ priv->p2r_bar[1].free = priv->p2r_bar[1].size;
+
+ for (i = 0; i < TSI721_OBWIN_NUM; i++)
+ priv->ob_win[i].active = false;
+
+ priv->obwin_cnt = TSI721_OBWIN_NUM;
+}
+
+/**
+ * tsi721_rio_map_inb_mem -- Mapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ * @rstart: RapidIO space start address.
+ * @size: The mapping region size.
+ * @flags: Flags for mapping. 0 for using default flags.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the inbound mapping
+ * from rstart to lstart.
+ */
+static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
+ u64 rstart, u64 size, u32 flags)
+{
+ struct tsi721_device *priv = mport->priv;
+ int i, avail = -1;
+ u32 regval;
+ struct tsi721_ib_win *ib_win;
+ bool direct = (lstart == rstart);
+ u64 ibw_size;
+ dma_addr_t loc_start;
+ u64 ibw_start;
+ struct tsi721_ib_win_mapping *map = NULL;
+ int ret = -EBUSY;
+
+ /* Max IBW size supported by HW is 16GB */
+ if (size > 0x400000000UL)
+ return -EINVAL;
+
+ if (direct) {
+ /* Calculate minimal acceptable window size and base address */
+
+ ibw_size = roundup_pow_of_two(size);
+ ibw_start = lstart & ~(ibw_size - 1);
+
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Direct (RIO_0x%llx -> PCIe_%pad), size=0x%llx, ibw_start = 0x%llx",
+ rstart, &lstart, size, ibw_start);
+
+ while ((lstart + size) > (ibw_start + ibw_size)) {
+ ibw_size *= 2;
+ ibw_start = lstart & ~(ibw_size - 1);
+ /* Check for crossing IBW max size 16GB */
+ if (ibw_size > 0x400000000UL)
+ return -EBUSY;
+ }
+
+ loc_start = ibw_start;
+
+ map = kzalloc(sizeof(struct tsi721_ib_win_mapping), GFP_ATOMIC);
+ if (map == NULL)
+ return -ENOMEM;
+
+ } else {
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Translated (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
+ rstart, &lstart, size);
+
+ if (!is_power_of_2(size) || size < 0x1000 ||
+ ((u64)lstart & (size - 1)) || (rstart & (size - 1)))
+ return -EINVAL;
+ if (priv->ibwin_cnt == 0)
+ return -EBUSY;
+ ibw_start = rstart;
+ ibw_size = size;
+ loc_start = lstart;
+ }
+
+ /*
+ * Scan for overlapping with active regions and mark the first available
+ * IB window at the same time.
+ */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ ib_win = &priv->ib_win[i];
+
+ if (!ib_win->active) {
+ if (avail == -1) {
+ avail = i;
+ ret = 0;
+ }
+ } else if (ibw_start < (ib_win->rstart + ib_win->size) &&
+ (ibw_start + ibw_size) > ib_win->rstart) {
+ /* Return error if address translation involved */
+ if (!direct || ib_win->xlat) {
+ ret = -EFAULT;
+ break;
+ }
+
+ /*
+ * Direct mappings usually are larger than originally
+ * requested fragments - check if this new request fits
+ * into it.
+ */
+ if (rstart >= ib_win->rstart &&
+ (rstart + size) <= (ib_win->rstart +
+ ib_win->size)) {
+ /* We are in - no further mapping required */
+ map->lstart = lstart;
+ list_add_tail(&map->node, &ib_win->mappings);
+ return 0;
+ }
+
+ ret = -EFAULT;
+ break;
+ }
+ }
+
+ if (ret)
+ goto out;
+ i = avail;
+
+ /* Sanity check: available IB window must be disabled at this point */
+ regval = ioread32(priv->regs + TSI721_IBWIN_LB(i));
+ if (WARN_ON(regval & TSI721_IBWIN_LB_WEN)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ ib_win = &priv->ib_win[i];
+ ib_win->active = true;
+ ib_win->rstart = ibw_start;
+ ib_win->lstart = loc_start;
+ ib_win->size = ibw_size;
+ ib_win->xlat = (lstart != rstart);
+ INIT_LIST_HEAD(&ib_win->mappings);
+
+ /*
+ * When using direct IBW mapping and have larger than requested IBW size
+ * we can have multiple local memory blocks mapped through the same IBW
+ * To handle this situation we maintain list of "clients" for such IBWs.
+ */
+ if (direct) {
+ map->lstart = lstart;
+ list_add_tail(&map->node, &ib_win->mappings);
+ }
+
+ iowrite32(TSI721_IBWIN_SIZE(ibw_size) << 8,
+ priv->regs + TSI721_IBWIN_SZ(i));
+
+ iowrite32(((u64)loc_start >> 32), priv->regs + TSI721_IBWIN_TUA(i));
+ iowrite32(((u64)loc_start & TSI721_IBWIN_TLA_ADD),
+ priv->regs + TSI721_IBWIN_TLA(i));
+
+ iowrite32(ibw_start >> 32, priv->regs + TSI721_IBWIN_UB(i));
+ iowrite32((ibw_start & TSI721_IBWIN_LB_BA) | TSI721_IBWIN_LB_WEN,
+ priv->regs + TSI721_IBWIN_LB(i));
+
+ priv->ibwin_cnt--;
+
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
+ i, ibw_start, &loc_start, ibw_size);
+
+ return 0;
+out:
+ kfree(map);
+ return ret;
+}
+
+/**
+ * tsi721_rio_unmap_inb_mem -- Unmapping inbound memory region.
+ * @mport: RapidIO master port
+ * @lstart: Local memory space start address.
+ */
+static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
+ dma_addr_t lstart)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_ib_win *ib_win;
+ int i;
+
+ tsi_debug(IBW, &priv->pdev->dev,
+ "Unmap IBW mapped to PCIe_%pad", &lstart);
+
+ /* Search for matching active inbound translation window */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ ib_win = &priv->ib_win[i];
+
+ /* Address translating IBWs must to be an exact march */
+ if (!ib_win->active ||
+ (ib_win->xlat && lstart != ib_win->lstart))
+ continue;
+
+ if (lstart >= ib_win->lstart &&
+ lstart < (ib_win->lstart + ib_win->size)) {
+
+ if (!ib_win->xlat) {
+ struct tsi721_ib_win_mapping *map;
+ int found = 0;
+
+ list_for_each_entry(map,
+ &ib_win->mappings, node) {
+ if (map->lstart == lstart) {
+ list_del(&map->node);
+ kfree(map);
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found)
+ continue;
+
+ if (!list_empty(&ib_win->mappings))
+ break;
+ }
+
+ tsi_debug(IBW, &priv->pdev->dev, "Disable IBWIN_%d", i);
+ iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+ ib_win->active = false;
+ priv->ibwin_cnt++;
+ break;
+ }
+ }
+
+ if (i == TSI721_IBWIN_NUM)
+ tsi_debug(IBW, &priv->pdev->dev,
+ "IB window mapped to %pad not found", &lstart);
+}
+
+/**
+ * tsi721_init_sr2pc_mapping - initializes inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 private data
+ *
+ * Disables inbound windows.
+ */
+static void tsi721_init_sr2pc_mapping(struct tsi721_device *priv)
+{
+ int i;
+
+ /* Disable all SR2PC inbound windows */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++)
+ iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+ priv->ibwin_cnt = TSI721_IBWIN_NUM;
+}
+
+/*
+ * tsi721_close_sr2pc_mapping - closes all active inbound (SRIO->PCIe)
+ * translation regions.
+ * @priv: pointer to tsi721 device private data
+ */
+static void tsi721_close_sr2pc_mapping(struct tsi721_device *priv)
+{
+ struct tsi721_ib_win *ib_win;
+ int i;
+
+ /* Disable all active SR2PC inbound windows */
+ for (i = 0; i < TSI721_IBWIN_NUM; i++) {
+ ib_win = &priv->ib_win[i];
+ if (ib_win->active) {
+ iowrite32(0, priv->regs + TSI721_IBWIN_LB(i));
+ ib_win->active = false;
+ }
+ }
+}
+
+/**
+ * tsi721_port_write_init - Inbound port write interface init
+ * @priv: pointer to tsi721 private data
+ *
+ * Initializes inbound port write handler.
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_port_write_init(struct tsi721_device *priv)
+{
+ priv->pw_discard_count = 0;
+ INIT_WORK(&priv->pw_work, tsi721_pw_dpc);
+ spin_lock_init(&priv->pw_fifo_lock);
+ if (kfifo_alloc(&priv->pw_fifo,
+ TSI721_RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) {
+ tsi_err(&priv->pdev->dev, "PW FIFO allocation failed");
+ return -ENOMEM;
+ }
+
+ /* Use reliable port-write capture mode */
+ iowrite32(TSI721_RIO_PW_CTL_PWC_REL, priv->regs + TSI721_RIO_PW_CTL);
+ return 0;
+}
+
+static void tsi721_port_write_free(struct tsi721_device *priv)
+{
+ kfifo_free(&priv->pw_fifo);
+}
+
+static int tsi721_doorbell_init(struct tsi721_device *priv)
+{
+ /* Outbound Doorbells do not require any setup.
+ * Tsi721 uses dedicated PCI BAR1 to generate doorbells.
+ * That BAR1 was mapped during the probe routine.
+ */
+
+ /* Initialize Inbound Doorbell processing DPC and queue */
+ priv->db_discard_count = 0;
+ INIT_WORK(&priv->idb_work, tsi721_db_dpc);
+
+ /* Allocate buffer for inbound doorbells queue */
+ priv->idb_base = dma_alloc_coherent(&priv->pdev->dev,
+ IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ &priv->idb_dma, GFP_KERNEL);
+ if (!priv->idb_base)
+ return -ENOMEM;
+
+ tsi_debug(DBELL, &priv->pdev->dev,
+ "Allocated IDB buffer @ %p (phys = %pad)",
+ priv->idb_base, &priv->idb_dma);
+
+ iowrite32(TSI721_IDQ_SIZE_VAL(IDB_QSIZE),
+ priv->regs + TSI721_IDQ_SIZE(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma >> 32),
+ priv->regs + TSI721_IDQ_BASEU(IDB_QUEUE));
+ iowrite32(((u64)priv->idb_dma & TSI721_IDQ_BASEL_ADDR),
+ priv->regs + TSI721_IDQ_BASEL(IDB_QUEUE));
+ /* Enable accepting all inbound doorbells */
+ iowrite32(0, priv->regs + TSI721_IDQ_MASK(IDB_QUEUE));
+
+ iowrite32(TSI721_IDQ_INIT, priv->regs + TSI721_IDQ_CTL(IDB_QUEUE));
+
+ iowrite32(0, priv->regs + TSI721_IDQ_RP(IDB_QUEUE));
+
+ return 0;
+}
+
+static void tsi721_doorbell_free(struct tsi721_device *priv)
+{
+ if (priv->idb_base == NULL)
+ return;
+
+ /* Free buffer allocated for inbound doorbell queue */
+ dma_free_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE,
+ priv->idb_base, priv->idb_dma);
+ priv->idb_base = NULL;
+}
+
+/**
+ * tsi721_bdma_maint_init - Initialize maintenance request BDMA channel.
+ * @priv: pointer to tsi721 private data
+ *
+ * Initialize BDMA channel allocated for RapidIO maintenance read/write
+ * request generation
+ * Returns %0 on success or %-ENOMEM on failure.
+ */
+static int tsi721_bdma_maint_init(struct tsi721_device *priv)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ u64 *sts_ptr;
+ dma_addr_t bd_phys, sts_phys;
+ int sts_size;
+ int bd_num = 2;
+ void __iomem *regs;
+
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "Init BDMA_%d Maintenance requests", TSI721_DMACH_MAINT);
+
+ /*
+ * Initialize DMA channel for maintenance requests
+ */
+
+ priv->mdma.ch_id = TSI721_DMACH_MAINT;
+ regs = priv->regs + TSI721_DMAC_BASE(TSI721_DMACH_MAINT);
+
+ /* Allocate space for DMA descriptors */
+ bd_ptr = dma_alloc_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ &bd_phys, GFP_KERNEL);
+ if (!bd_ptr)
+ return -ENOMEM;
+
+ priv->mdma.bd_num = bd_num;
+ priv->mdma.bd_phys = bd_phys;
+ priv->mdma.bd_base = bd_ptr;
+
+ tsi_debug(MAINT, &priv->pdev->dev, "DMA descriptors @ %p (phys = %pad)",
+ bd_ptr, &bd_phys);
+
+ /* Allocate space for descriptor status FIFO */
+ sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ?
+ bd_num : TSI721_DMA_MINSTSSZ;
+ sts_size = roundup_pow_of_two(sts_size);
+ sts_ptr = dma_alloc_coherent(&priv->pdev->dev,
+ sts_size * sizeof(struct tsi721_dma_sts),
+ &sts_phys, GFP_KERNEL);
+ if (!sts_ptr) {
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ bd_num * sizeof(struct tsi721_dma_desc),
+ bd_ptr, bd_phys);
+ priv->mdma.bd_base = NULL;
+ return -ENOMEM;
+ }
+
+ priv->mdma.sts_phys = sts_phys;
+ priv->mdma.sts_base = sts_ptr;
+ priv->mdma.sts_size = sts_size;
+
+ tsi_debug(MAINT, &priv->pdev->dev,
+ "desc status FIFO @ %p (phys = %pad) size=0x%x",
+ sts_ptr, &sts_phys, sts_size);
+
+ /* Initialize DMA descriptors ring */
+ bd_ptr[bd_num - 1].type_id = cpu_to_le32(DTYPE3 << 29);
+ bd_ptr[bd_num - 1].next_lo = cpu_to_le32((u64)bd_phys &
+ TSI721_DMAC_DPTRL_MASK);
+ bd_ptr[bd_num - 1].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+ /* Setup DMA descriptor pointers */
+ iowrite32(((u64)bd_phys >> 32), regs + TSI721_DMAC_DPTRH);
+ iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+ regs + TSI721_DMAC_DPTRL);
+
+ /* Setup descriptor status FIFO */
+ iowrite32(((u64)sts_phys >> 32), regs + TSI721_DMAC_DSBH);
+ iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+ regs + TSI721_DMAC_DSBL);
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+ regs + TSI721_DMAC_DSSZ);
+
+ /* Clear interrupt bits */
+ iowrite32(TSI721_DMAC_INT_ALL, regs + TSI721_DMAC_INT);
+
+ ioread32(regs + TSI721_DMAC_INT);
+
+ /* Toggle DMA channel initialization */
+ iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+ ioread32(regs + TSI721_DMAC_CTL);
+ udelay(10);
+
+ return 0;
+}
+
+static int tsi721_bdma_maint_free(struct tsi721_device *priv)
+{
+ u32 ch_stat;
+ struct tsi721_bdma_maint *mdma = &priv->mdma;
+ void __iomem *regs = priv->regs + TSI721_DMAC_BASE(mdma->ch_id);
+
+ if (mdma->bd_base == NULL)
+ return 0;
+
+ /* Check if DMA channel still running */
+ ch_stat = ioread32(regs + TSI721_DMAC_STS);
+ if (ch_stat & TSI721_DMAC_STS_RUN)
+ return -EFAULT;
+
+ /* Put DMA channel into init state */
+ iowrite32(TSI721_DMAC_CTL_INIT, regs + TSI721_DMAC_CTL);
+
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ mdma->bd_num * sizeof(struct tsi721_dma_desc),
+ mdma->bd_base, mdma->bd_phys);
+ mdma->bd_base = NULL;
+
+ /* Free space allocated for status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ mdma->sts_size * sizeof(struct tsi721_dma_sts),
+ mdma->sts_base, mdma->sts_phys);
+ mdma->sts_base = NULL;
+ return 0;
+}
+
+/* Enable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Enable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_IMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Inbound Messaging Interrupts */
+static void
+tsi721_imsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Inbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* Disable Inbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_IBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Enable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_enable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Enable Outbound Messaging channel interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ iowrite32(rval | inte_mask, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to enable next levels
+ */
+
+ /* Enable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ iowrite32(rval | TSI721_INT_OMSG_CHAN(ch),
+ priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/* Disable Outbound Messaging interrupts */
+static void
+tsi721_omsg_interrupt_disable(struct tsi721_device *priv, int ch,
+ u32 inte_mask)
+{
+ u32 rval;
+
+ if (!inte_mask)
+ return;
+
+ /* Clear pending Outbound Messaging interrupts */
+ iowrite32(inte_mask, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ /* Disable Outbound Messaging interrupts */
+ rval = ioread32(priv->regs + TSI721_OBDMAC_INTE(ch));
+ rval &= ~inte_mask;
+ iowrite32(rval, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ if (priv->flags & TSI721_USING_MSIX)
+ return; /* Finished if we are in MSI-X mode */
+
+ /*
+ * For MSI and INTA interrupt signalling we need to disable next levels
+ */
+
+ /* Disable Device Channel Interrupt */
+ rval = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ rval &= ~TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(rval, priv->regs + TSI721_DEV_CHAN_INTE);
+}
+
+/**
+ * tsi721_add_outb_message - Add message to the Tsi721 outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ */
+static int
+tsi721_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *desc;
+ u32 tx_slot;
+ unsigned long flags;
+
+ if (!priv->omsg_init[mbox] ||
+ len > TSI721_MSG_MAX_SIZE || len < 8)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->omsg_ring[mbox].lock, flags);
+
+ tx_slot = priv->omsg_ring[mbox].tx_slot;
+
+ /* Copy copy message into transfer buffer */
+ memcpy(priv->omsg_ring[mbox].omq_base[tx_slot], buffer, len);
+
+ if (len & 0x7)
+ len += 8;
+
+ /* Build descriptor associated with buffer */
+ desc = priv->omsg_ring[mbox].omd_base;
+ desc[tx_slot].type_id = cpu_to_le32((DTYPE4 << 29) | rdev->destid);
+#ifdef TSI721_OMSG_DESC_INT
+ /* Request IOF_DONE interrupt generation for each N-th frame in queue */
+ if (tx_slot % 4 == 0)
+ desc[tx_slot].type_id |= cpu_to_le32(TSI721_OMD_IOF);
+#endif
+ desc[tx_slot].msg_info =
+ cpu_to_le32((mport->sys_size << 26) | (mbox << 22) |
+ (0xe << 12) | (len & 0xff8));
+ desc[tx_slot].bufptr_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] &
+ 0xffffffff);
+ desc[tx_slot].bufptr_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omq_phys[tx_slot] >> 32);
+
+ priv->omsg_ring[mbox].wr_count++;
+
+ /* Go to next descriptor */
+ if (++priv->omsg_ring[mbox].tx_slot == priv->omsg_ring[mbox].size) {
+ priv->omsg_ring[mbox].tx_slot = 0;
+ /* Move through the ring link descriptor at the end */
+ priv->omsg_ring[mbox].wr_count++;
+ }
+
+ mb();
+
+ /* Set new write count value */
+ iowrite32(priv->omsg_ring[mbox].wr_count,
+ priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+
+ spin_unlock_irqrestore(&priv->omsg_ring[mbox].lock, flags);
+
+ return 0;
+}
+
+/**
+ * tsi721_omsg_handler - Outbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: number of OB MSG channel to service
+ *
+ * Services channel interrupts from outbound messaging engine.
+ */
+static void tsi721_omsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 omsg_int;
+ struct rio_mport *mport = &priv->mport;
+ void *dev_id = NULL;
+ u32 tx_slot = 0xffffffff;
+ int do_callback = 0;
+
+ spin_lock(&priv->omsg_ring[ch].lock);
+
+ omsg_int = ioread32(priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (omsg_int & TSI721_OBDMAC_INT_ST_FULL)
+ tsi_info(&priv->pdev->dev,
+ "OB MBOX%d: Status FIFO is full", ch);
+
+ if (omsg_int & (TSI721_OBDMAC_INT_DONE | TSI721_OBDMAC_INT_IOF_DONE)) {
+ u32 srd_ptr;
+ u64 *sts_ptr, last_ptr = 0, prev_ptr = 0;
+ int i, j;
+
+ /*
+ * Find last successfully processed descriptor
+ */
+
+ /* Check and clear descriptor status FIFO entries */
+ srd_ptr = priv->omsg_ring[ch].sts_rdptr;
+ sts_ptr = priv->omsg_ring[ch].sts_base;
+ j = srd_ptr * 8;
+ while (sts_ptr[j]) {
+ for (i = 0; i < 8 && sts_ptr[j]; i++, j++) {
+ prev_ptr = last_ptr;
+ last_ptr = le64_to_cpu(sts_ptr[j]);
+ sts_ptr[j] = 0;
+ }
+
+ ++srd_ptr;
+ srd_ptr %= priv->omsg_ring[ch].sts_size;
+ j = srd_ptr * 8;
+ }
+
+ if (last_ptr == 0)
+ goto no_sts_update;
+
+ priv->omsg_ring[ch].sts_rdptr = srd_ptr;
+ iowrite32(srd_ptr, priv->regs + TSI721_OBDMAC_DSRP(ch));
+
+ if (!mport->outb_msg[ch].mcback)
+ goto no_sts_update;
+
+ /* Inform upper layer about transfer completion */
+
+ tx_slot = (last_ptr - (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+
+ /*
+ * Check if this is a Link Descriptor (LD).
+ * If yes, ignore LD and use descriptor processed
+ * before LD.
+ */
+ if (tx_slot == priv->omsg_ring[ch].size) {
+ if (prev_ptr)
+ tx_slot = (prev_ptr -
+ (u64)priv->omsg_ring[ch].omd_phys)/
+ sizeof(struct tsi721_omsg_desc);
+ else
+ goto no_sts_update;
+ }
+
+ if (tx_slot >= priv->omsg_ring[ch].size)
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "OB_MSG tx_slot=%x > size=%x",
+ tx_slot, priv->omsg_ring[ch].size);
+ WARN_ON(tx_slot >= priv->omsg_ring[ch].size);
+
+ /* Move slot index to the next message to be sent */
+ ++tx_slot;
+ if (tx_slot == priv->omsg_ring[ch].size)
+ tx_slot = 0;
+
+ dev_id = priv->omsg_ring[ch].dev_id;
+ do_callback = 1;
+ }
+
+no_sts_update:
+
+ if (omsg_int & TSI721_OBDMAC_INT_ERROR) {
+ /*
+ * Outbound message operation aborted due to error,
+ * reinitialize OB MSG channel
+ */
+
+ tsi_debug(OMSG, &priv->pdev->dev, "OB MSG ABORT ch_stat=%x",
+ ioread32(priv->regs + TSI721_OBDMAC_STS(ch)));
+
+ iowrite32(TSI721_OBDMAC_INT_ERROR,
+ priv->regs + TSI721_OBDMAC_INT(ch));
+ iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
+ priv->regs + TSI721_OBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_CTL(ch));
+
+ /* Inform upper level to clear all pending tx slots */
+ dev_id = priv->omsg_ring[ch].dev_id;
+ tx_slot = priv->omsg_ring[ch].tx_slot;
+ do_callback = 1;
+
+ /* Synch tx_slot tracking */
+ iowrite32(priv->omsg_ring[ch].tx_slot,
+ priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ ioread32(priv->regs + TSI721_OBDMAC_DRDCNT(ch));
+ priv->omsg_ring[ch].wr_count = priv->omsg_ring[ch].tx_slot;
+ priv->omsg_ring[ch].sts_rdptr = 0;
+ }
+
+ /* Clear channel interrupts */
+ iowrite32(omsg_int, priv->regs + TSI721_OBDMAC_INT(ch));
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_OMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->omsg_ring[ch].lock);
+
+ if (mport->outb_msg[ch].mcback && do_callback)
+ mport->outb_msg[ch].mcback(mport, dev_id, ch, tx_slot);
+}
+
+/**
+ * tsi721_open_outb_mbox - Initialize Tsi721 outbound mailbox
+ * @mport: Master port implementing Outbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ */
+static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_omsg_desc *bd_ptr;
+ int i, rc = 0;
+
+ if ((entries < TSI721_OMSGD_MIN_RING_SIZE) ||
+ (entries > (TSI721_OMSGD_RING_SIZE)) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((mbox_sel & (1 << mbox)) == 0) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ priv->omsg_ring[mbox].dev_id = dev_id;
+ priv->omsg_ring[mbox].size = entries;
+ priv->omsg_ring[mbox].sts_rdptr = 0;
+ spin_lock_init(&priv->omsg_ring[mbox].lock);
+
+ /* Outbound Msg Buffer allocation based on
+ the number of maximum descriptor entries */
+ for (i = 0; i < entries; i++) {
+ priv->omsg_ring[mbox].omq_base[i] =
+ dma_alloc_coherent(
+ &priv->pdev->dev, TSI721_MSG_BUFFER_SIZE,
+ &priv->omsg_ring[mbox].omq_phys[i],
+ GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omq_base[i] == NULL) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "ENOMEM for OB_MSG_%d data buffer", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+ }
+
+ /* Outbound message descriptor allocation */
+ priv->omsg_ring[mbox].omd_base = dma_alloc_coherent(
+ &priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ &priv->omsg_ring[mbox].omd_phys, GFP_KERNEL);
+ if (priv->omsg_ring[mbox].omd_base == NULL) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "ENOMEM for OB_MSG_%d descriptor memory", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ priv->omsg_ring[mbox].tx_slot = 0;
+
+ /* Outbound message descriptor status FIFO allocation */
+ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1);
+ priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ &priv->omsg_ring[mbox].sts_phys,
+ GFP_KERNEL);
+ if (priv->omsg_ring[mbox].sts_base == NULL) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "ENOMEM for OB_MSG_%d status FIFO", mbox);
+ rc = -ENOMEM;
+ goto out_desc;
+ }
+
+ /*
+ * Configure Outbound Messaging Engine
+ */
+
+ /* Setup Outbound Message descriptor pointer */
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DPTRH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK),
+ priv->regs + TSI721_OBDMAC_DPTRL(mbox));
+
+ /* Setup Outbound Message descriptor status FIFO */
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys >> 32),
+ priv->regs + TSI721_OBDMAC_DSBH(mbox));
+ iowrite32(((u64)priv->omsg_ring[mbox].sts_phys &
+ TSI721_OBDMAC_DSBL_MASK),
+ priv->regs + TSI721_OBDMAC_DSBL(mbox));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(priv->omsg_ring[mbox].sts_size),
+ priv->regs + (u32)TSI721_OBDMAC_DSSZ(mbox));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ int idx = TSI721_VECT_OMB0_DONE + mbox;
+
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for OBOX%d-DONE",
+ mbox);
+ goto out_stat;
+ }
+
+ idx = TSI721_VECT_OMB0_INT + mbox;
+ rc = request_irq(priv->msix[idx].vector, tsi721_omsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(OMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for MBOX%d-INT", mbox);
+ idx = TSI721_VECT_OMB0_DONE + mbox;
+ free_irq(priv->msix[idx].vector, (void *)priv);
+ goto out_stat;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_omsg_interrupt_enable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+ /* Initialize Outbound Message descriptors ring */
+ bd_ptr = priv->omsg_ring[mbox].omd_base;
+ bd_ptr[entries].type_id = cpu_to_le32(DTYPE5 << 29);
+ bd_ptr[entries].msg_info = 0;
+ bd_ptr[entries].next_lo =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys &
+ TSI721_OBDMAC_DPTRL_MASK);
+ bd_ptr[entries].next_hi =
+ cpu_to_le32((u64)priv->omsg_ring[mbox].omd_phys >> 32);
+ priv->omsg_ring[mbox].wr_count = 0;
+ mb();
+
+ /* Initialize Outbound Message engine */
+ iowrite32(TSI721_OBDMAC_CTL_RETRY_THR | TSI721_OBDMAC_CTL_INIT,
+ priv->regs + TSI721_OBDMAC_CTL(mbox));
+ ioread32(priv->regs + TSI721_OBDMAC_DWRCNT(mbox));
+ udelay(10);
+
+ priv->omsg_init[mbox] = 1;
+
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_stat:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ (entries + 1) * sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+out_buf:
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_outb_mbox - Close Tsi721 outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 i;
+
+ if (!priv->omsg_init[mbox])
+ return;
+ priv->omsg_init[mbox] = 0;
+
+ /* Disable Interrupts */
+
+ tsi721_omsg_interrupt_disable(priv, mbox, TSI721_OBDMAC_INT_ALL);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_OMB0_DONE + mbox].vector,
+ (void *)priv);
+ free_irq(priv->msix[TSI721_VECT_OMB0_INT + mbox].vector,
+ (void *)priv);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Free OMSG Descriptor Status FIFO */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts),
+ priv->omsg_ring[mbox].sts_base,
+ priv->omsg_ring[mbox].sts_phys);
+
+ priv->omsg_ring[mbox].sts_base = NULL;
+
+ /* Free OMSG descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ (priv->omsg_ring[mbox].size + 1) *
+ sizeof(struct tsi721_omsg_desc),
+ priv->omsg_ring[mbox].omd_base,
+ priv->omsg_ring[mbox].omd_phys);
+
+ priv->omsg_ring[mbox].omd_base = NULL;
+
+ /* Free message buffers */
+ for (i = 0; i < priv->omsg_ring[mbox].size; i++) {
+ if (priv->omsg_ring[mbox].omq_base[i]) {
+ dma_free_coherent(&priv->pdev->dev,
+ TSI721_MSG_BUFFER_SIZE,
+ priv->omsg_ring[mbox].omq_base[i],
+ priv->omsg_ring[mbox].omq_phys[i]);
+
+ priv->omsg_ring[mbox].omq_base[i] = NULL;
+ }
+ }
+}
+
+/**
+ * tsi721_imsg_handler - Inbound Message Interrupt Handler
+ * @priv: pointer to tsi721 private data
+ * @ch: inbound message channel number to service
+ *
+ * Services channel interrupts from inbound messaging engine.
+ */
+static void tsi721_imsg_handler(struct tsi721_device *priv, int ch)
+{
+ u32 mbox = ch - 4;
+ u32 imsg_int;
+ struct rio_mport *mport = &priv->mport;
+
+ spin_lock(&priv->imsg_ring[mbox].lock);
+
+ imsg_int = ioread32(priv->regs + TSI721_IBDMAC_INT(ch));
+
+ if (imsg_int & TSI721_IBDMAC_INT_SRTO)
+ tsi_info(&priv->pdev->dev, "IB MBOX%d SRIO timeout", mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_PC_ERROR)
+ tsi_info(&priv->pdev->dev, "IB MBOX%d PCIe error", mbox);
+
+ if (imsg_int & TSI721_IBDMAC_INT_FQ_LOW)
+ tsi_info(&priv->pdev->dev, "IB MBOX%d IB free queue low", mbox);
+
+ /* Clear IB channel interrupts */
+ iowrite32(imsg_int, priv->regs + TSI721_IBDMAC_INT(ch));
+
+ /* If an IB Msg is received notify the upper layer */
+ if (imsg_int & TSI721_IBDMAC_INT_DQ_RCV &&
+ mport->inb_msg[mbox].mcback)
+ mport->inb_msg[mbox].mcback(mport,
+ priv->imsg_ring[mbox].dev_id, mbox, -1);
+
+ if (!(priv->flags & TSI721_USING_MSIX)) {
+ u32 ch_inte;
+
+ /* Re-enable channel interrupts */
+ ch_inte = ioread32(priv->regs + TSI721_DEV_CHAN_INTE);
+ ch_inte |= TSI721_INT_IMSG_CHAN(ch);
+ iowrite32(ch_inte, priv->regs + TSI721_DEV_CHAN_INTE);
+ }
+
+ spin_unlock(&priv->imsg_ring[mbox].lock);
+}
+
+/**
+ * tsi721_open_inb_mbox - Initialize Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ */
+static int tsi721_open_inb_mbox(struct rio_mport *mport, void *dev_id,
+ int mbox, int entries)
+{
+ struct tsi721_device *priv = mport->priv;
+ int ch = mbox + 4;
+ int i;
+ u64 *free_ptr;
+ int rc = 0;
+
+ if ((entries < TSI721_IMSGD_MIN_RING_SIZE) ||
+ (entries > TSI721_IMSGD_RING_SIZE) ||
+ (!is_power_of_2(entries)) || mbox >= RIO_MAX_MBOX) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if ((mbox_sel & (1 << mbox)) == 0) {
+ rc = -ENODEV;
+ goto out;
+ }
+
+ /* Initialize IB Messaging Ring */
+ priv->imsg_ring[mbox].dev_id = dev_id;
+ priv->imsg_ring[mbox].size = entries;
+ priv->imsg_ring[mbox].rx_slot = 0;
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+ for (i = 0; i < priv->imsg_ring[mbox].size; i++)
+ priv->imsg_ring[mbox].imq_base[i] = NULL;
+ spin_lock_init(&priv->imsg_ring[mbox].lock);
+
+ /* Allocate buffers for incoming messages */
+ priv->imsg_ring[mbox].buf_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * TSI721_MSG_BUFFER_SIZE,
+ &priv->imsg_ring[mbox].buf_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].buf_base == NULL) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to allocate buffers for IB MBOX%d", mbox);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Allocate memory for circular free list */
+ priv->imsg_ring[mbox].imfq_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * 8,
+ &priv->imsg_ring[mbox].imfq_phys,
+ GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imfq_base == NULL) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to allocate free queue for IB MBOX%d", mbox);
+ rc = -ENOMEM;
+ goto out_buf;
+ }
+
+ /* Allocate memory for Inbound message descriptors */
+ priv->imsg_ring[mbox].imd_base =
+ dma_alloc_coherent(&priv->pdev->dev,
+ entries * sizeof(struct tsi721_imsg_desc),
+ &priv->imsg_ring[mbox].imd_phys, GFP_KERNEL);
+
+ if (priv->imsg_ring[mbox].imd_base == NULL) {
+ tsi_err(&priv->pdev->dev,
+ "Failed to allocate descriptor memory for IB MBOX%d",
+ mbox);
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+
+ /* Fill free buffer pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ for (i = 0; i < entries; i++)
+ free_ptr[i] = cpu_to_le64(
+ (u64)(priv->imsg_ring[mbox].buf_phys) +
+ i * 0x1000);
+
+ mb();
+
+ /*
+ * For mapping of inbound SRIO Messages into appropriate queues we need
+ * to set Inbound Device ID register in the messaging engine. We do it
+ * once when first inbound mailbox is requested.
+ */
+ if (!(priv->flags & TSI721_IMSGID_SET)) {
+ iowrite32((u32)priv->mport.host_deviceid,
+ priv->regs + TSI721_IB_DEVID);
+ priv->flags |= TSI721_IMSGID_SET;
+ }
+
+ /*
+ * Configure Inbound Messaging channel (ch = mbox + 4)
+ */
+
+ /* Setup Inbound Message free queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys >> 32),
+ priv->regs + TSI721_IBDMAC_FQBH(ch));
+ iowrite32(((u64)priv->imsg_ring[mbox].imfq_phys &
+ TSI721_IBDMAC_FQBL_MASK),
+ priv->regs+TSI721_IBDMAC_FQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_FQSZ(ch));
+
+ /* Setup Inbound Message descriptor queue */
+ iowrite32(((u64)priv->imsg_ring[mbox].imd_phys >> 32),
+ priv->regs + TSI721_IBDMAC_DQBH(ch));
+ iowrite32(((u32)priv->imsg_ring[mbox].imd_phys &
+ (u32)TSI721_IBDMAC_DQBL_MASK),
+ priv->regs+TSI721_IBDMAC_DQBL(ch));
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(entries),
+ priv->regs + TSI721_IBDMAC_DQSZ(ch));
+
+ /* Enable interrupts */
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ int idx = TSI721_VECT_IMB0_RCV + mbox;
+
+ /* Request interrupt service if we are in MSI-X mode */
+ rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(IMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for IBOX%d-DONE",
+ mbox);
+ goto out_desc;
+ }
+
+ idx = TSI721_VECT_IMB0_INT + mbox;
+ rc = request_irq(priv->msix[idx].vector, tsi721_imsg_msix, 0,
+ priv->msix[idx].irq_name, (void *)priv);
+
+ if (rc) {
+ tsi_debug(IMSG, &priv->pdev->dev,
+ "Unable to get MSI-X IRQ for IBOX%d-INT", mbox);
+ free_irq(
+ priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)priv);
+ goto out_desc;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ tsi721_imsg_interrupt_enable(priv, ch, TSI721_IBDMAC_INT_ALL);
+
+ /* Initialize Inbound Message Engine */
+ iowrite32(TSI721_IBDMAC_CTL_INIT, priv->regs + TSI721_IBDMAC_CTL(ch));
+ ioread32(priv->regs + TSI721_IBDMAC_CTL(ch));
+ udelay(10);
+ priv->imsg_ring[mbox].fq_wrptr = entries - 1;
+ iowrite32(entries - 1, priv->regs + TSI721_IBDMAC_FQWP(ch));
+
+ priv->imsg_init[mbox] = 1;
+ return 0;
+
+#ifdef CONFIG_PCI_MSI
+out_desc:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+#endif /* CONFIG_PCI_MSI */
+
+out_dma:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+out_buf:
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_close_inb_mbox - Shut down Tsi721 inbound mailbox
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Mailbox to close
+ */
+static void tsi721_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int ch = mbox + 4;
+
+ if (!priv->imsg_init[mbox]) /* mbox isn't initialized yet */
+ return;
+ priv->imsg_init[mbox] = 0;
+
+ /* Disable Inbound Messaging Engine */
+
+ /* Disable Interrupts */
+ tsi721_imsg_interrupt_disable(priv, ch, TSI721_OBDMAC_INT_MASK);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_IMB0_RCV + mbox].vector,
+ (void *)priv);
+ free_irq(priv->msix[TSI721_VECT_IMB0_INT + mbox].vector,
+ (void *)priv);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Clear Inbound Buffer Queue */
+ for (rx_slot = 0; rx_slot < priv->imsg_ring[mbox].size; rx_slot++)
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ /* Free memory allocated for message buffers */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * TSI721_MSG_BUFFER_SIZE,
+ priv->imsg_ring[mbox].buf_base,
+ priv->imsg_ring[mbox].buf_phys);
+
+ priv->imsg_ring[mbox].buf_base = NULL;
+
+ /* Free memory allocated for free pointr list */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * 8,
+ priv->imsg_ring[mbox].imfq_base,
+ priv->imsg_ring[mbox].imfq_phys);
+
+ priv->imsg_ring[mbox].imfq_base = NULL;
+
+ /* Free memory allocated for RX descriptors */
+ dma_free_coherent(&priv->pdev->dev,
+ priv->imsg_ring[mbox].size * sizeof(struct tsi721_imsg_desc),
+ priv->imsg_ring[mbox].imd_base,
+ priv->imsg_ring[mbox].imd_phys);
+
+ priv->imsg_ring[mbox].imd_base = NULL;
+}
+
+/**
+ * tsi721_add_inb_buffer - Add buffer to the Tsi721 inbound message queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ */
+static int tsi721_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rx_slot;
+ int rc = 0;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ if (priv->imsg_ring[mbox].imq_base[rx_slot]) {
+ tsi_err(&priv->pdev->dev,
+ "Error adding inbound buffer %d, buffer exists",
+ rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ priv->imsg_ring[mbox].imq_base[rx_slot] = buf;
+
+ if (++priv->imsg_ring[mbox].rx_slot == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].rx_slot = 0;
+
+out:
+ return rc;
+}
+
+/**
+ * tsi721_get_inb_message - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static void *tsi721_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ struct tsi721_device *priv = mport->priv;
+ struct tsi721_imsg_desc *desc;
+ u32 rx_slot;
+ void *rx_virt = NULL;
+ u64 rx_phys;
+ void *buf = NULL;
+ u64 *free_ptr;
+ int ch = mbox + 4;
+ int msg_size;
+
+ if (!priv->imsg_init[mbox])
+ return NULL;
+
+ desc = priv->imsg_ring[mbox].imd_base;
+ desc += priv->imsg_ring[mbox].desc_rdptr;
+
+ if (!(le32_to_cpu(desc->msg_info) & TSI721_IMD_HO))
+ goto out;
+
+ rx_slot = priv->imsg_ring[mbox].rx_slot;
+ while (priv->imsg_ring[mbox].imq_base[rx_slot] == NULL) {
+ if (++rx_slot == priv->imsg_ring[mbox].size)
+ rx_slot = 0;
+ }
+
+ rx_phys = ((u64)le32_to_cpu(desc->bufptr_hi) << 32) |
+ le32_to_cpu(desc->bufptr_lo);
+
+ rx_virt = priv->imsg_ring[mbox].buf_base +
+ (rx_phys - (u64)priv->imsg_ring[mbox].buf_phys);
+
+ buf = priv->imsg_ring[mbox].imq_base[rx_slot];
+ msg_size = le32_to_cpu(desc->msg_info) & TSI721_IMD_BCOUNT;
+ if (msg_size == 0)
+ msg_size = RIO_MAX_MSG_SIZE;
+
+ memcpy(buf, rx_virt, msg_size);
+ priv->imsg_ring[mbox].imq_base[rx_slot] = NULL;
+
+ desc->msg_info &= cpu_to_le32(~TSI721_IMD_HO);
+ if (++priv->imsg_ring[mbox].desc_rdptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].desc_rdptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].desc_rdptr,
+ priv->regs + TSI721_IBDMAC_DQRP(ch));
+
+ /* Return free buffer into the pointer list */
+ free_ptr = priv->imsg_ring[mbox].imfq_base;
+ free_ptr[priv->imsg_ring[mbox].fq_wrptr] = cpu_to_le64(rx_phys);
+
+ if (++priv->imsg_ring[mbox].fq_wrptr == priv->imsg_ring[mbox].size)
+ priv->imsg_ring[mbox].fq_wrptr = 0;
+
+ iowrite32(priv->imsg_ring[mbox].fq_wrptr,
+ priv->regs + TSI721_IBDMAC_FQWP(ch));
+out:
+ return buf;
+}
+
+/**
+ * tsi721_messages_init - Initialization of Messaging Engine
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 messaging engine.
+ */
+static int tsi721_messages_init(struct tsi721_device *priv)
+{
+ int ch;
+
+ iowrite32(0, priv->regs + TSI721_SMSG_ECC_LOG);
+ iowrite32(0, priv->regs + TSI721_RETRY_GEN_CNT);
+ iowrite32(0, priv->regs + TSI721_RETRY_RX_CNT);
+
+ /* Set SRIO Message Request/Response Timeout */
+ iowrite32(TSI721_RQRPTO_VAL, priv->regs + TSI721_RQRPTO);
+
+ /* Initialize Inbound Messaging Engine Registers */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++) {
+ /* Clear interrupt bits */
+ iowrite32(TSI721_IBDMAC_INT_MASK,
+ priv->regs + TSI721_IBDMAC_INT(ch));
+ /* Clear Status */
+ iowrite32(0, priv->regs + TSI721_IBDMAC_STS(ch));
+
+ iowrite32(TSI721_SMSG_ECC_COR_LOG_MASK,
+ priv->regs + TSI721_SMSG_ECC_COR_LOG(ch));
+ iowrite32(TSI721_SMSG_ECC_NCOR_MASK,
+ priv->regs + TSI721_SMSG_ECC_NCOR(ch));
+ }
+
+ return 0;
+}
+
+/**
+ * tsi721_query_mport - Fetch inbound message from the Tsi721 MSG Queue
+ * @mport: Master port implementing the Inbound Messaging Engine
+ * @mbox: Inbound mailbox number
+ *
+ * Returns pointer to the message on success or NULL on failure.
+ */
+static int tsi721_query_mport(struct rio_mport *mport,
+ struct rio_mport_attr *attr)
+{
+ struct tsi721_device *priv = mport->priv;
+ u32 rval;
+
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
+ if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
+ attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
+ attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
+ } else
+ attr->link_speed = RIO_LINK_DOWN;
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ attr->flags = RIO_MPORT_DMA | RIO_MPORT_DMA_SG;
+ attr->dma_max_sge = 0;
+ attr->dma_max_size = TSI721_BDMA_MAX_BCOUNT;
+ attr->dma_align = 0;
+#else
+ attr->flags = 0;
+#endif
+ return 0;
+}
+
+/**
+ * tsi721_disable_ints - disables all device interrupts
+ * @priv: pointer to tsi721 private data
+ */
+static void tsi721_disable_ints(struct tsi721_device *priv)
+{
+ int ch;
+
+ /* Disable all device level interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_INTE);
+
+ /* Disable all Device Channel interrupts */
+ iowrite32(0, priv->regs + TSI721_DEV_CHAN_INTE);
+
+ /* Disable all Inbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_IMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_IBDMAC_INTE(ch));
+
+ /* Disable all Outbound Msg Channel interrupts */
+ for (ch = 0; ch < TSI721_OMSG_CHNUM; ch++)
+ iowrite32(0, priv->regs + TSI721_OBDMAC_INTE(ch));
+
+ /* Disable all general messaging interrupts */
+ iowrite32(0, priv->regs + TSI721_SMSG_INTE);
+
+ /* Disable all BDMA Channel interrupts */
+ for (ch = 0; ch < TSI721_DMA_MAXCH; ch++)
+ iowrite32(0,
+ priv->regs + TSI721_DMAC_BASE(ch) + TSI721_DMAC_INTE);
+
+ /* Disable all general BDMA interrupts */
+ iowrite32(0, priv->regs + TSI721_BDMA_INTE);
+
+ /* Disable all SRIO Channel interrupts */
+ for (ch = 0; ch < TSI721_SRIO_MAXCH; ch++)
+ iowrite32(0, priv->regs + TSI721_SR_CHINTE(ch));
+
+ /* Disable all general SR2PC interrupts */
+ iowrite32(0, priv->regs + TSI721_SR2PC_GEN_INTE);
+
+ /* Disable all PC2SR interrupts */
+ iowrite32(0, priv->regs + TSI721_PC2SR_INTE);
+
+ /* Disable all I2C interrupts */
+ iowrite32(0, priv->regs + TSI721_I2C_INT_ENABLE);
+
+ /* Disable SRIO MAC interrupts */
+ iowrite32(0, priv->regs + TSI721_RIO_EM_INT_ENABLE);
+ iowrite32(0, priv->regs + TSI721_RIO_EM_DEV_INT_EN);
+}
+
+static struct rio_ops tsi721_rio_ops = {
+ .lcread = tsi721_lcread,
+ .lcwrite = tsi721_lcwrite,
+ .cread = tsi721_cread_dma,
+ .cwrite = tsi721_cwrite_dma,
+ .dsend = tsi721_dsend,
+ .open_inb_mbox = tsi721_open_inb_mbox,
+ .close_inb_mbox = tsi721_close_inb_mbox,
+ .open_outb_mbox = tsi721_open_outb_mbox,
+ .close_outb_mbox = tsi721_close_outb_mbox,
+ .add_outb_message = tsi721_add_outb_message,
+ .add_inb_buffer = tsi721_add_inb_buffer,
+ .get_inb_message = tsi721_get_inb_message,
+ .map_inb = tsi721_rio_map_inb_mem,
+ .unmap_inb = tsi721_rio_unmap_inb_mem,
+ .pwenable = tsi721_pw_enable,
+ .query_mport = tsi721_query_mport,
+ .map_outb = tsi721_map_outb_win,
+ .unmap_outb = tsi721_unmap_outb_win,
+};
+
+static void tsi721_mport_release(struct device *dev)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ tsi_debug(EXIT, dev, "%s id=%d", mport->name, mport->id);
+}
+
+/**
+ * tsi721_setup_mport - Setup Tsi721 as RapidIO subsystem master port
+ * @priv: pointer to tsi721 private data
+ *
+ * Configures Tsi721 as RapidIO master port.
+ */
+static int tsi721_setup_mport(struct tsi721_device *priv)
+{
+ struct pci_dev *pdev = priv->pdev;
+ int err = 0;
+ struct rio_mport *mport = &priv->mport;
+
+ err = rio_mport_initialize(mport);
+ if (err)
+ return err;
+
+ mport->ops = &tsi721_rio_ops;
+ mport->index = 0;
+ mport->sys_size = 0; /* small system */
+ mport->priv = (void *)priv;
+ mport->phys_efptr = 0x100;
+ mport->phys_rmap = 1;
+ mport->dev.parent = &pdev->dev;
+ mport->dev.release = tsi721_mport_release;
+
+ INIT_LIST_HEAD(&mport->dbells);
+
+ rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3);
+ rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3);
+ snprintf(mport->name, RIO_MAX_MPORT_NAME, "%s(%s)",
+ dev_driver_string(&pdev->dev), dev_name(&pdev->dev));
+
+ /* Hook up interrupt handler */
+
+#ifdef CONFIG_PCI_MSI
+ if (!tsi721_enable_msix(priv))
+ priv->flags |= TSI721_USING_MSIX;
+ else if (!pci_enable_msi(pdev))
+ priv->flags |= TSI721_USING_MSI;
+ else
+ tsi_debug(MPORT, &pdev->dev,
+ "MSI/MSI-X is not available. Using legacy INTx.");
+#endif /* CONFIG_PCI_MSI */
+
+ err = tsi721_request_irq(priv);
+
+ if (err) {
+ tsi_err(&pdev->dev, "Unable to get PCI IRQ %02X (err=0x%x)",
+ pdev->irq, err);
+ return err;
+ }
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ err = tsi721_register_dma(priv);
+ if (err)
+ goto err_exit;
+#endif
+ /* Enable SRIO link */
+ iowrite32(ioread32(priv->regs + TSI721_DEVCTL) |
+ TSI721_DEVCTL_SRBOOT_CMPL,
+ priv->regs + TSI721_DEVCTL);
+
+ if (mport->host_deviceid >= 0)
+ iowrite32(RIO_PORT_GEN_HOST | RIO_PORT_GEN_MASTER |
+ RIO_PORT_GEN_DISCOVERED,
+ priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+ else
+ iowrite32(0, priv->regs + (0x100 + RIO_PORT_GEN_CTL_CSR));
+
+ err = rio_register_mport(mport);
+ if (err) {
+ tsi721_unregister_dma(priv);
+ goto err_exit;
+ }
+
+ return 0;
+
+err_exit:
+ tsi721_free_irq(priv);
+ return err;
+}
+
+static int tsi721_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct tsi721_device *priv;
+ int err;
+
+ priv = kzalloc(sizeof(struct tsi721_device), GFP_KERNEL);
+ if (!priv) {
+ err = -ENOMEM;
+ goto err_exit;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ tsi_err(&pdev->dev, "Failed to enable PCI device");
+ goto err_clean;
+ }
+
+ priv->pdev = pdev;
+
+#ifdef DEBUG
+ {
+ int i;
+
+ for (i = 0; i < PCI_STD_NUM_BARS; i++) {
+ tsi_debug(INIT, &pdev->dev, "res%d %pR",
+ i, &pdev->resource[i]);
+ }
+ }
+#endif
+ /*
+ * Verify BAR configuration
+ */
+
+ /* BAR_0 (registers) must be 512KB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_0) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_0) < TSI721_REG_SPACE_SIZE) {
+ tsi_err(&pdev->dev, "Missing or misconfigured CSR BAR0");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /* BAR_1 (outbound doorbells) must be 16MB+ in 32-bit address space */
+ if (!(pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM) ||
+ pci_resource_flags(pdev, BAR_1) & IORESOURCE_MEM_64 ||
+ pci_resource_len(pdev, BAR_1) < TSI721_DB_WIN_SIZE) {
+ tsi_err(&pdev->dev, "Missing or misconfigured Doorbell BAR1");
+ err = -ENODEV;
+ goto err_disable_pdev;
+ }
+
+ /*
+ * BAR_2 and BAR_4 (outbound translation) must be in 64-bit PCIe address
+ * space.
+ * NOTE: BAR_2 and BAR_4 are not used by this version of driver.
+ * It may be a good idea to keep them disabled using HW configuration
+ * to save PCI memory space.
+ */
+
+ priv->p2r_bar[0].size = priv->p2r_bar[1].size = 0;
+
+ if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_MEM_64) {
+ if (pci_resource_flags(pdev, BAR_2) & IORESOURCE_PREFETCH)
+ tsi_debug(INIT, &pdev->dev,
+ "Prefetchable OBW BAR2 will not be used");
+ else {
+ priv->p2r_bar[0].base = pci_resource_start(pdev, BAR_2);
+ priv->p2r_bar[0].size = pci_resource_len(pdev, BAR_2);
+ }
+ }
+
+ if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_MEM_64) {
+ if (pci_resource_flags(pdev, BAR_4) & IORESOURCE_PREFETCH)
+ tsi_debug(INIT, &pdev->dev,
+ "Prefetchable OBW BAR4 will not be used");
+ else {
+ priv->p2r_bar[1].base = pci_resource_start(pdev, BAR_4);
+ priv->p2r_bar[1].size = pci_resource_len(pdev, BAR_4);
+ }
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ tsi_err(&pdev->dev, "Unable to obtain PCI resources");
+ goto err_disable_pdev;
+ }
+
+ pci_set_master(pdev);
+
+ priv->regs = pci_ioremap_bar(pdev, BAR_0);
+ if (!priv->regs) {
+ tsi_err(&pdev->dev, "Unable to map device registers space");
+ err = -ENOMEM;
+ goto err_free_res;
+ }
+
+ priv->odb_base = pci_ioremap_bar(pdev, BAR_1);
+ if (!priv->odb_base) {
+ tsi_err(&pdev->dev, "Unable to map outbound doorbells space");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ /* Configure DMA attributes. */
+ if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ tsi_err(&pdev->dev, "Unable to set DMA mask");
+ goto err_unmap_bars;
+ }
+
+ if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)))
+ tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
+ } else {
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (err)
+ tsi_info(&pdev->dev, "Unable to set consistent DMA mask");
+ }
+
+ BUG_ON(!pci_is_pcie(pdev));
+
+ /* Clear "no snoop" and "relaxed ordering" bits. */
+ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN, 0);
+
+ /* Override PCIe Maximum Read Request Size setting if requested */
+ if (pcie_mrrs >= 0) {
+ if (pcie_mrrs <= 5)
+ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_READRQ, pcie_mrrs << 12);
+ else
+ tsi_info(&pdev->dev,
+ "Invalid MRRS override value %d", pcie_mrrs);
+ }
+
+ /* Set PCIe completion timeout to 1-10ms */
+ pcie_capability_clear_and_set_word(pdev, PCI_EXP_DEVCTL2,
+ PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0x2);
+
+ /*
+ * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block
+ */
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0x01);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXTBL,
+ TSI721_MSIXTBL_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_MSIXPBA,
+ TSI721_MSIXPBA_OFFSET);
+ pci_write_config_dword(pdev, TSI721_PCIECFG_EPCTL, 0);
+ /* End of FIXUP */
+
+ tsi721_disable_ints(priv);
+
+ tsi721_init_pc2sr_mapping(priv);
+ tsi721_init_sr2pc_mapping(priv);
+
+ if (tsi721_bdma_maint_init(priv)) {
+ tsi_err(&pdev->dev, "BDMA initialization failed");
+ err = -ENOMEM;
+ goto err_unmap_bars;
+ }
+
+ err = tsi721_doorbell_init(priv);
+ if (err)
+ goto err_free_bdma;
+
+ tsi721_port_write_init(priv);
+
+ err = tsi721_messages_init(priv);
+ if (err)
+ goto err_free_consistent;
+
+ err = tsi721_setup_mport(priv);
+ if (err)
+ goto err_free_consistent;
+
+ pci_set_drvdata(pdev, priv);
+ tsi721_interrupts_init(priv);
+
+ return 0;
+
+err_free_consistent:
+ tsi721_port_write_free(priv);
+ tsi721_doorbell_free(priv);
+err_free_bdma:
+ tsi721_bdma_maint_free(priv);
+err_unmap_bars:
+ if (priv->regs)
+ iounmap(priv->regs);
+ if (priv->odb_base)
+ iounmap(priv->odb_base);
+err_free_res:
+ pci_release_regions(pdev);
+ pci_clear_master(pdev);
+err_disable_pdev:
+ pci_disable_device(pdev);
+err_clean:
+ kfree(priv);
+err_exit:
+ return err;
+}
+
+static void tsi721_remove(struct pci_dev *pdev)
+{
+ struct tsi721_device *priv = pci_get_drvdata(pdev);
+
+ tsi_debug(EXIT, &pdev->dev, "enter");
+
+ tsi721_disable_ints(priv);
+ tsi721_free_irq(priv);
+ flush_scheduled_work();
+ rio_unregister_mport(&priv->mport);
+
+ tsi721_unregister_dma(priv);
+ tsi721_bdma_maint_free(priv);
+ tsi721_doorbell_free(priv);
+ tsi721_port_write_free(priv);
+ tsi721_close_sr2pc_mapping(priv);
+
+ if (priv->regs)
+ iounmap(priv->regs);
+ if (priv->odb_base)
+ iounmap(priv->odb_base);
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX)
+ pci_disable_msix(priv->pdev);
+ else if (priv->flags & TSI721_USING_MSI)
+ pci_disable_msi(priv->pdev);
+#endif
+ pci_release_regions(pdev);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ kfree(priv);
+ tsi_debug(EXIT, &pdev->dev, "exit");
+}
+
+static void tsi721_shutdown(struct pci_dev *pdev)
+{
+ struct tsi721_device *priv = pci_get_drvdata(pdev);
+
+ tsi_debug(EXIT, &pdev->dev, "enter");
+
+ tsi721_disable_ints(priv);
+ tsi721_dma_stop_all(priv);
+ pci_clear_master(pdev);
+ pci_disable_device(pdev);
+}
+
+static const struct pci_device_id tsi721_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_IDT, PCI_DEVICE_ID_TSI721) },
+ { 0, } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(pci, tsi721_pci_tbl);
+
+static struct pci_driver tsi721_driver = {
+ .name = "tsi721",
+ .id_table = tsi721_pci_tbl,
+ .probe = tsi721_probe,
+ .remove = tsi721_remove,
+ .shutdown = tsi721_shutdown,
+};
+
+module_pci_driver(tsi721_driver);
+
+MODULE_DESCRIPTION("IDT Tsi721 PCIExpress-to-SRIO bridge driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h
new file mode 100644
index 000000000..4f996ce62
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721.h
@@ -0,0 +1,923 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Tsi721 PCIExpress-to-SRIO bridge definitions
+ *
+ * Copyright 2011, Integrated Device Technology, Inc.
+ */
+
+#ifndef __TSI721_H
+#define __TSI721_H
+
+/* Debug output filtering masks */
+enum {
+ DBG_NONE = 0,
+ DBG_INIT = BIT(0), /* driver init */
+ DBG_EXIT = BIT(1), /* driver exit */
+ DBG_MPORT = BIT(2), /* mport add/remove */
+ DBG_MAINT = BIT(3), /* maintenance ops messages */
+ DBG_DMA = BIT(4), /* DMA transfer messages */
+ DBG_DMAV = BIT(5), /* verbose DMA transfer messages */
+ DBG_IBW = BIT(6), /* inbound window */
+ DBG_EVENT = BIT(7), /* event handling messages */
+ DBG_OBW = BIT(8), /* outbound window messages */
+ DBG_DBELL = BIT(9), /* doorbell messages */
+ DBG_OMSG = BIT(10), /* doorbell messages */
+ DBG_IMSG = BIT(11), /* doorbell messages */
+ DBG_ALL = ~0,
+};
+
+#ifdef DEBUG
+extern u32 tsi_dbg_level;
+
+#define tsi_debug(level, dev, fmt, arg...) \
+ do { \
+ if (DBG_##level & tsi_dbg_level) \
+ dev_dbg(dev, "%s: " fmt "\n", __func__, ##arg); \
+ } while (0)
+#else
+#define tsi_debug(level, dev, fmt, arg...) \
+ no_printk(KERN_DEBUG "%s: " fmt "\n", __func__, ##arg)
+#endif
+
+#define tsi_info(dev, fmt, arg...) \
+ dev_info(dev, "%s: " fmt "\n", __func__, ##arg)
+
+#define tsi_warn(dev, fmt, arg...) \
+ dev_warn(dev, "%s: WARNING " fmt "\n", __func__, ##arg)
+
+#define tsi_err(dev, fmt, arg...) \
+ dev_err(dev, "%s: ERROR " fmt "\n", __func__, ##arg)
+
+#define DRV_NAME "tsi721"
+
+#define DEFAULT_HOPCOUNT 0xff
+#define DEFAULT_DESTID 0xff
+
+/* PCI device ID */
+#define PCI_DEVICE_ID_TSI721 0x80ab
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_2 2
+#define BAR_4 4
+
+#define TSI721_PC2SR_BARS 2
+#define TSI721_PC2SR_WINS 8
+#define TSI721_PC2SR_ZONES 8
+#define TSI721_MAINT_WIN 0 /* Window for outbound maintenance requests */
+#define IDB_QUEUE 0 /* Inbound Doorbell Queue to use */
+#define IDB_QSIZE 512 /* Inbound Doorbell Queue size */
+
+/* Memory space sizes */
+#define TSI721_REG_SPACE_SIZE (512 * 1024) /* 512K */
+#define TSI721_DB_WIN_SIZE (16 * 1024 * 1024) /* 16MB */
+
+#define RIO_TT_CODE_8 0x00000000
+#define RIO_TT_CODE_16 0x00000001
+
+#define TSI721_DMA_MAXCH 8
+#define TSI721_DMA_MINSTSSZ 32
+#define TSI721_DMA_STSBLKSZ 8
+
+#define TSI721_SRIO_MAXCH 8
+
+#define DBELL_SID(buf) (((u8)buf[2] << 8) | (u8)buf[3])
+#define DBELL_TID(buf) (((u8)buf[4] << 8) | (u8)buf[5])
+#define DBELL_INF(buf) (((u8)buf[0] << 8) | (u8)buf[1])
+
+#define TSI721_RIO_PW_MSG_SIZE 16 /* Tsi721 saves only 16 bytes of PW msg */
+
+/* Register definitions */
+
+/*
+ * Registers in PCIe configuration space
+ */
+
+#define TSI721_PCIECFG_MSIXTBL 0x0a4
+#define TSI721_MSIXTBL_OFFSET 0x2c000
+#define TSI721_PCIECFG_MSIXPBA 0x0a8
+#define TSI721_MSIXPBA_OFFSET 0x2a000
+#define TSI721_PCIECFG_EPCTL 0x400
+
+/*
+ * Event Management Registers
+ */
+
+#define TSI721_RIO_EM_INT_STAT 0x10910
+#define TSI721_RIO_EM_INT_STAT_PW_RX 0x00010000
+
+#define TSI721_RIO_EM_INT_ENABLE 0x10914
+#define TSI721_RIO_EM_INT_ENABLE_PW_RX 0x00010000
+
+#define TSI721_RIO_EM_DEV_INT_EN 0x10930
+#define TSI721_RIO_EM_DEV_INT_EN_INT 0x00000001
+
+/*
+ * Port-Write Block Registers
+ */
+
+#define TSI721_RIO_PW_CTL 0x10a04
+#define TSI721_RIO_PW_CTL_PW_TIMER 0xf0000000
+#define TSI721_RIO_PW_CTL_PWT_DIS (0 << 28)
+#define TSI721_RIO_PW_CTL_PWT_103 (1 << 28)
+#define TSI721_RIO_PW_CTL_PWT_205 (1 << 29)
+#define TSI721_RIO_PW_CTL_PWT_410 (1 << 30)
+#define TSI721_RIO_PW_CTL_PWT_820 (1 << 31)
+#define TSI721_RIO_PW_CTL_PWC_MODE 0x01000000
+#define TSI721_RIO_PW_CTL_PWC_CONT 0x00000000
+#define TSI721_RIO_PW_CTL_PWC_REL 0x01000000
+
+#define TSI721_RIO_PW_RX_STAT 0x10a10
+#define TSI721_RIO_PW_RX_STAT_WR_SIZE 0x0000f000
+#define TSI_RIO_PW_RX_STAT_WDPTR 0x00000100
+#define TSI721_RIO_PW_RX_STAT_PW_SHORT 0x00000008
+#define TSI721_RIO_PW_RX_STAT_PW_TRUNC 0x00000004
+#define TSI721_RIO_PW_RX_STAT_PW_DISC 0x00000002
+#define TSI721_RIO_PW_RX_STAT_PW_VAL 0x00000001
+
+#define TSI721_RIO_PW_RX_CAPT(x) (0x10a20 + (x)*4)
+
+/*
+ * Inbound Doorbells
+ */
+
+#define TSI721_IDB_ENTRY_SIZE 64
+
+#define TSI721_IDQ_CTL(x) (0x20000 + (x) * 0x1000)
+#define TSI721_IDQ_SUSPEND 0x00000002
+#define TSI721_IDQ_INIT 0x00000001
+
+#define TSI721_IDQ_STS(x) (0x20004 + (x) * 0x1000)
+#define TSI721_IDQ_RUN 0x00200000
+
+#define TSI721_IDQ_MASK(x) (0x20008 + (x) * 0x1000)
+#define TSI721_IDQ_MASK_MASK 0xffff0000
+#define TSI721_IDQ_MASK_PATT 0x0000ffff
+
+#define TSI721_IDQ_RP(x) (0x2000c + (x) * 0x1000)
+#define TSI721_IDQ_RP_PTR 0x0007ffff
+
+#define TSI721_IDQ_WP(x) (0x20010 + (x) * 0x1000)
+#define TSI721_IDQ_WP_PTR 0x0007ffff
+
+#define TSI721_IDQ_BASEL(x) (0x20014 + (x) * 0x1000)
+#define TSI721_IDQ_BASEL_ADDR 0xffffffc0
+#define TSI721_IDQ_BASEU(x) (0x20018 + (x) * 0x1000)
+#define TSI721_IDQ_SIZE(x) (0x2001c + (x) * 0x1000)
+#define TSI721_IDQ_SIZE_VAL(size) (__fls(size) - 4)
+#define TSI721_IDQ_SIZE_MIN 512
+#define TSI721_IDQ_SIZE_MAX (512 * 1024)
+
+#define TSI721_SR_CHINT(x) (0x20040 + (x) * 0x1000)
+#define TSI721_SR_CHINTE(x) (0x20044 + (x) * 0x1000)
+#define TSI721_SR_CHINTSET(x) (0x20048 + (x) * 0x1000)
+#define TSI721_SR_CHINT_ODBOK 0x00000020
+#define TSI721_SR_CHINT_IDBQRCV 0x00000010
+#define TSI721_SR_CHINT_SUSP 0x00000008
+#define TSI721_SR_CHINT_ODBTO 0x00000004
+#define TSI721_SR_CHINT_ODBRTRY 0x00000002
+#define TSI721_SR_CHINT_ODBERR 0x00000001
+#define TSI721_SR_CHINT_ALL 0x0000003f
+
+#define TSI721_IBWIN_NUM 8
+
+#define TSI721_IBWIN_LB(x) (0x29000 + (x) * 0x20)
+#define TSI721_IBWIN_LB_BA 0xfffff000
+#define TSI721_IBWIN_LB_WEN 0x00000001
+
+#define TSI721_IBWIN_UB(x) (0x29004 + (x) * 0x20)
+#define TSI721_IBWIN_SZ(x) (0x29008 + (x) * 0x20)
+#define TSI721_IBWIN_SZ_SIZE 0x00001f00
+#define TSI721_IBWIN_SIZE(size) (__fls(size) - 12)
+
+#define TSI721_IBWIN_TLA(x) (0x2900c + (x) * 0x20)
+#define TSI721_IBWIN_TLA_ADD 0xfffff000
+#define TSI721_IBWIN_TUA(x) (0x29010 + (x) * 0x20)
+
+#define TSI721_SR2PC_GEN_INTE 0x29800
+#define TSI721_SR2PC_PWE 0x29804
+#define TSI721_SR2PC_GEN_INT 0x29808
+
+#define TSI721_DEV_INTE 0x29840
+#define TSI721_DEV_INT 0x29844
+#define TSI721_DEV_INTSET 0x29848
+#define TSI721_DEV_INT_BDMA_CH 0x00002000
+#define TSI721_DEV_INT_BDMA_NCH 0x00001000
+#define TSI721_DEV_INT_SMSG_CH 0x00000800
+#define TSI721_DEV_INT_SMSG_NCH 0x00000400
+#define TSI721_DEV_INT_SR2PC_CH 0x00000200
+#define TSI721_DEV_INT_SRIO 0x00000020
+
+#define TSI721_DEV_CHAN_INTE 0x2984c
+#define TSI721_DEV_CHAN_INT 0x29850
+
+#define TSI721_INT_SR2PC_CHAN_M 0xff000000
+#define TSI721_INT_SR2PC_CHAN(x) (1 << (24 + (x)))
+#define TSI721_INT_IMSG_CHAN_M 0x00ff0000
+#define TSI721_INT_IMSG_CHAN(x) (1 << (16 + (x)))
+#define TSI721_INT_OMSG_CHAN_M 0x0000ff00
+#define TSI721_INT_OMSG_CHAN(x) (1 << (8 + (x)))
+#define TSI721_INT_BDMA_CHAN_M 0x000000ff
+#define TSI721_INT_BDMA_CHAN(x) (1 << (x))
+
+/*
+ * PC2SR block registers
+ */
+#define TSI721_OBWIN_NUM TSI721_PC2SR_WINS
+
+#define TSI721_OBWINLB(x) (0x40000 + (x) * 0x20)
+#define TSI721_OBWINLB_BA 0xffff8000
+#define TSI721_OBWINLB_WEN 0x00000001
+
+#define TSI721_OBWINUB(x) (0x40004 + (x) * 0x20)
+
+#define TSI721_OBWINSZ(x) (0x40008 + (x) * 0x20)
+#define TSI721_OBWINSZ_SIZE 0x00001f00
+#define TSI721_OBWIN_SIZE(size) (__fls(size) - 15)
+
+#define TSI721_ZONE_SEL 0x41300
+#define TSI721_ZONE_SEL_RD_WRB 0x00020000
+#define TSI721_ZONE_SEL_GO 0x00010000
+#define TSI721_ZONE_SEL_WIN 0x00000038
+#define TSI721_ZONE_SEL_ZONE 0x00000007
+
+#define TSI721_LUT_DATA0 0x41304
+#define TSI721_LUT_DATA0_ADD 0xfffff000
+#define TSI721_LUT_DATA0_RDTYPE 0x00000f00
+#define TSI721_LUT_DATA0_NREAD 0x00000100
+#define TSI721_LUT_DATA0_MNTRD 0x00000200
+#define TSI721_LUT_DATA0_RDCRF 0x00000020
+#define TSI721_LUT_DATA0_WRCRF 0x00000010
+#define TSI721_LUT_DATA0_WRTYPE 0x0000000f
+#define TSI721_LUT_DATA0_NWR 0x00000001
+#define TSI721_LUT_DATA0_MNTWR 0x00000002
+#define TSI721_LUT_DATA0_NWR_R 0x00000004
+
+#define TSI721_LUT_DATA1 0x41308
+
+#define TSI721_LUT_DATA2 0x4130c
+#define TSI721_LUT_DATA2_HC 0xff000000
+#define TSI721_LUT_DATA2_ADD65 0x000c0000
+#define TSI721_LUT_DATA2_TT 0x00030000
+#define TSI721_LUT_DATA2_DSTID 0x0000ffff
+
+#define TSI721_PC2SR_INTE 0x41310
+
+#define TSI721_DEVCTL 0x48004
+#define TSI721_DEVCTL_SRBOOT_CMPL 0x00000004
+
+#define TSI721_I2C_INT_ENABLE 0x49120
+
+/*
+ * Block DMA Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_DMAC_BASE(x) (0x51000 + (x) * 0x1000)
+
+#define TSI721_DMAC_DWRCNT 0x000
+#define TSI721_DMAC_DRDCNT 0x004
+
+#define TSI721_DMAC_CTL 0x008
+#define TSI721_DMAC_CTL_SUSP 0x00000002
+#define TSI721_DMAC_CTL_INIT 0x00000001
+
+#define TSI721_DMAC_INT 0x00c
+#define TSI721_DMAC_INT_STFULL 0x00000010
+#define TSI721_DMAC_INT_DONE 0x00000008
+#define TSI721_DMAC_INT_SUSP 0x00000004
+#define TSI721_DMAC_INT_ERR 0x00000002
+#define TSI721_DMAC_INT_IOFDONE 0x00000001
+#define TSI721_DMAC_INT_ALL 0x0000001f
+
+#define TSI721_DMAC_INTSET 0x010
+
+#define TSI721_DMAC_STS 0x014
+#define TSI721_DMAC_STS_ABORT 0x00400000
+#define TSI721_DMAC_STS_RUN 0x00200000
+#define TSI721_DMAC_STS_CS 0x001f0000
+
+#define TSI721_DMAC_INTE 0x018
+
+#define TSI721_DMAC_DPTRL 0x024
+#define TSI721_DMAC_DPTRL_MASK 0xffffffe0
+
+#define TSI721_DMAC_DPTRH 0x028
+
+#define TSI721_DMAC_DSBL 0x02c
+#define TSI721_DMAC_DSBL_MASK 0xffffffc0
+
+#define TSI721_DMAC_DSBH 0x030
+
+#define TSI721_DMAC_DSSZ 0x034
+#define TSI721_DMAC_DSSZ_SIZE_M 0x0000000f
+#define TSI721_DMAC_DSSZ_SIZE(size) (__fls(size) - 4)
+
+#define TSI721_DMAC_DSRP 0x038
+#define TSI721_DMAC_DSRP_MASK 0x0007ffff
+
+#define TSI721_DMAC_DSWP 0x03c
+#define TSI721_DMAC_DSWP_MASK 0x0007ffff
+
+#define TSI721_BDMA_INTE 0x5f000
+
+/*
+ * Messaging definitions
+ */
+#define TSI721_MSG_BUFFER_SIZE RIO_MAX_MSG_SIZE
+#define TSI721_MSG_MAX_SIZE RIO_MAX_MSG_SIZE
+#define TSI721_IMSG_MAXCH 8
+#define TSI721_IMSG_CHNUM TSI721_IMSG_MAXCH
+#define TSI721_IMSGD_MIN_RING_SIZE 32
+#define TSI721_IMSGD_RING_SIZE 512
+
+#define TSI721_OMSG_CHNUM 4 /* One channel per MBOX */
+#define TSI721_OMSGD_MIN_RING_SIZE 32
+#define TSI721_OMSGD_RING_SIZE 512
+
+/*
+ * Outbound Messaging Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_OBDMAC_DWRCNT(x) (0x61000 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_DRDCNT(x) (0x61004 + (x) * 0x1000)
+
+#define TSI721_OBDMAC_CTL(x) (0x61008 + (x) * 0x1000)
+#define TSI721_OBDMAC_CTL_MASK 0x00000007
+#define TSI721_OBDMAC_CTL_RETRY_THR 0x00000004
+#define TSI721_OBDMAC_CTL_SUSPEND 0x00000002
+#define TSI721_OBDMAC_CTL_INIT 0x00000001
+
+#define TSI721_OBDMAC_INT(x) (0x6100c + (x) * 0x1000)
+#define TSI721_OBDMAC_INTSET(x) (0x61010 + (x) * 0x1000)
+#define TSI721_OBDMAC_INTE(x) (0x61018 + (x) * 0x1000)
+#define TSI721_OBDMAC_INT_MASK 0x0000001F
+#define TSI721_OBDMAC_INT_ST_FULL 0x00000010
+#define TSI721_OBDMAC_INT_DONE 0x00000008
+#define TSI721_OBDMAC_INT_SUSPENDED 0x00000004
+#define TSI721_OBDMAC_INT_ERROR 0x00000002
+#define TSI721_OBDMAC_INT_IOF_DONE 0x00000001
+#define TSI721_OBDMAC_INT_ALL TSI721_OBDMAC_INT_MASK
+
+#define TSI721_OBDMAC_STS(x) (0x61014 + (x) * 0x1000)
+#define TSI721_OBDMAC_STS_MASK 0x007f0000
+#define TSI721_OBDMAC_STS_ABORT 0x00400000
+#define TSI721_OBDMAC_STS_RUN 0x00200000
+#define TSI721_OBDMAC_STS_CS 0x001f0000
+
+#define TSI721_OBDMAC_PWE(x) (0x6101c + (x) * 0x1000)
+#define TSI721_OBDMAC_PWE_MASK 0x00000002
+#define TSI721_OBDMAC_PWE_ERROR_EN 0x00000002
+
+#define TSI721_OBDMAC_DPTRL(x) (0x61020 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRL_MASK 0xfffffff0
+
+#define TSI721_OBDMAC_DPTRH(x) (0x61024 + (x) * 0x1000)
+#define TSI721_OBDMAC_DPTRH_MASK 0xffffffff
+
+#define TSI721_OBDMAC_DSBL(x) (0x61040 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBL_MASK 0xffffffc0
+
+#define TSI721_OBDMAC_DSBH(x) (0x61044 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSBH_MASK 0xffffffff
+
+#define TSI721_OBDMAC_DSSZ(x) (0x61048 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSSZ_MASK 0x0000000f
+
+#define TSI721_OBDMAC_DSRP(x) (0x6104c + (x) * 0x1000)
+#define TSI721_OBDMAC_DSRP_MASK 0x0007ffff
+
+#define TSI721_OBDMAC_DSWP(x) (0x61050 + (x) * 0x1000)
+#define TSI721_OBDMAC_DSWP_MASK 0x0007ffff
+
+#define TSI721_RQRPTO 0x60010
+#define TSI721_RQRPTO_MASK 0x00ffffff
+#define TSI721_RQRPTO_VAL 400 /* Response TO value */
+
+/*
+ * Inbound Messaging Engine Registers
+ * x = 0..7
+ */
+
+#define TSI721_IB_DEVID_GLOBAL 0xffff
+#define TSI721_IBDMAC_FQBL(x) (0x61200 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBL_MASK 0xffffffc0
+
+#define TSI721_IBDMAC_FQBH(x) (0x61204 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQBH_MASK 0xffffffff
+
+#define TSI721_IBDMAC_FQSZ_ENTRY_INX TSI721_IMSGD_RING_SIZE
+#define TSI721_IBDMAC_FQSZ(x) (0x61208 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQSZ_MASK 0x0000000f
+
+#define TSI721_IBDMAC_FQRP(x) (0x6120c + (x) * 0x1000)
+#define TSI721_IBDMAC_FQRP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_FQWP(x) (0x61210 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQWP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_FQTH(x) (0x61214 + (x) * 0x1000)
+#define TSI721_IBDMAC_FQTH_MASK 0x0007ffff
+
+#define TSI721_IB_DEVID 0x60020
+#define TSI721_IB_DEVID_MASK 0x0000ffff
+
+#define TSI721_IBDMAC_CTL(x) (0x61240 + (x) * 0x1000)
+#define TSI721_IBDMAC_CTL_MASK 0x00000003
+#define TSI721_IBDMAC_CTL_SUSPEND 0x00000002
+#define TSI721_IBDMAC_CTL_INIT 0x00000001
+
+#define TSI721_IBDMAC_STS(x) (0x61244 + (x) * 0x1000)
+#define TSI721_IBDMAC_STS_MASK 0x007f0000
+#define TSI721_IBSMAC_STS_ABORT 0x00400000
+#define TSI721_IBSMAC_STS_RUN 0x00200000
+#define TSI721_IBSMAC_STS_CS 0x001f0000
+
+#define TSI721_IBDMAC_INT(x) (0x61248 + (x) * 0x1000)
+#define TSI721_IBDMAC_INTSET(x) (0x6124c + (x) * 0x1000)
+#define TSI721_IBDMAC_INTE(x) (0x61250 + (x) * 0x1000)
+#define TSI721_IBDMAC_INT_MASK 0x0000100f
+#define TSI721_IBDMAC_INT_SRTO 0x00001000
+#define TSI721_IBDMAC_INT_SUSPENDED 0x00000008
+#define TSI721_IBDMAC_INT_PC_ERROR 0x00000004
+#define TSI721_IBDMAC_INT_FQ_LOW 0x00000002
+#define TSI721_IBDMAC_INT_DQ_RCV 0x00000001
+#define TSI721_IBDMAC_INT_ALL TSI721_IBDMAC_INT_MASK
+
+#define TSI721_IBDMAC_PWE(x) (0x61254 + (x) * 0x1000)
+#define TSI721_IBDMAC_PWE_MASK 0x00001700
+#define TSI721_IBDMAC_PWE_SRTO 0x00001000
+#define TSI721_IBDMAC_PWE_ILL_FMT 0x00000400
+#define TSI721_IBDMAC_PWE_ILL_DEC 0x00000200
+#define TSI721_IBDMAC_PWE_IMP_SP 0x00000100
+
+#define TSI721_IBDMAC_DQBL(x) (0x61300 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBL_MASK 0xffffffc0
+#define TSI721_IBDMAC_DQBL_ADDR 0xffffffc0
+
+#define TSI721_IBDMAC_DQBH(x) (0x61304 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQBH_MASK 0xffffffff
+
+#define TSI721_IBDMAC_DQRP(x) (0x61308 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQRP_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_DQWR(x) (0x6130c + (x) * 0x1000)
+#define TSI721_IBDMAC_DQWR_MASK 0x0007ffff
+
+#define TSI721_IBDMAC_DQSZ(x) (0x61314 + (x) * 0x1000)
+#define TSI721_IBDMAC_DQSZ_MASK 0x0000000f
+
+/*
+ * Messaging Engine Interrupts
+ */
+
+#define TSI721_SMSG_PWE 0x6a004
+
+#define TSI721_SMSG_INTE 0x6a000
+#define TSI721_SMSG_INT 0x6a008
+#define TSI721_SMSG_INTSET 0x6a010
+#define TSI721_SMSG_INT_MASK 0x0086ffff
+#define TSI721_SMSG_INT_UNS_RSP 0x00800000
+#define TSI721_SMSG_INT_ECC_NCOR 0x00040000
+#define TSI721_SMSG_INT_ECC_COR 0x00020000
+#define TSI721_SMSG_INT_ECC_NCOR_CH 0x0000ff00
+#define TSI721_SMSG_INT_ECC_COR_CH 0x000000ff
+
+#define TSI721_SMSG_ECC_LOG 0x6a014
+#define TSI721_SMSG_ECC_LOG_MASK 0x00070007
+#define TSI721_SMSG_ECC_LOG_ECC_NCOR_M 0x00070000
+#define TSI721_SMSG_ECC_LOG_ECC_COR_M 0x00000007
+
+#define TSI721_RETRY_GEN_CNT 0x6a100
+#define TSI721_RETRY_GEN_CNT_MASK 0xffffffff
+
+#define TSI721_RETRY_RX_CNT 0x6a104
+#define TSI721_RETRY_RX_CNT_MASK 0xffffffff
+
+#define TSI721_SMSG_ECC_COR_LOG(x) (0x6a300 + (x) * 4)
+#define TSI721_SMSG_ECC_COR_LOG_MASK 0x000000ff
+
+#define TSI721_SMSG_ECC_NCOR(x) (0x6a340 + (x) * 4)
+#define TSI721_SMSG_ECC_NCOR_MASK 0x000000ff
+
+/*
+ * Block DMA Descriptors
+ */
+
+struct tsi721_dma_desc {
+ __le32 type_id;
+
+#define TSI721_DMAD_DEVID 0x0000ffff
+#define TSI721_DMAD_CRF 0x00010000
+#define TSI721_DMAD_PRIO 0x00060000
+#define TSI721_DMAD_RTYPE 0x00780000
+#define TSI721_DMAD_IOF 0x08000000
+#define TSI721_DMAD_DTYPE 0xe0000000
+
+ __le32 bcount;
+
+#define TSI721_DMAD_BCOUNT1 0x03ffffff /* if DTYPE == 1 */
+#define TSI721_DMAD_BCOUNT2 0x0000000f /* if DTYPE == 2 */
+#define TSI721_DMAD_TT 0x0c000000
+#define TSI721_DMAD_RADDR0 0xc0000000
+
+ union {
+ __le32 raddr_lo; /* if DTYPE == (1 || 2) */
+ __le32 next_lo; /* if DTYPE == 3 */
+ };
+
+#define TSI721_DMAD_CFGOFF 0x00ffffff
+#define TSI721_DMAD_HOPCNT 0xff000000
+
+ union {
+ __le32 raddr_hi; /* if DTYPE == (1 || 2) */
+ __le32 next_hi; /* if DTYPE == 3 */
+ };
+
+ union {
+ struct { /* if DTYPE == 1 */
+ __le32 bufptr_lo;
+ __le32 bufptr_hi;
+ __le32 s_dist;
+ __le32 s_size;
+ } t1;
+ __le32 data[4]; /* if DTYPE == 2 */
+ u32 reserved[4]; /* if DTYPE == 3 */
+ };
+} __aligned(32);
+
+/*
+ * Inbound Messaging Descriptor
+ */
+struct tsi721_imsg_desc {
+ __le32 type_id;
+
+#define TSI721_IMD_DEVID 0x0000ffff
+#define TSI721_IMD_CRF 0x00010000
+#define TSI721_IMD_PRIO 0x00060000
+#define TSI721_IMD_TT 0x00180000
+#define TSI721_IMD_DTYPE 0xe0000000
+
+ __le32 msg_info;
+
+#define TSI721_IMD_BCOUNT 0x00000ff8
+#define TSI721_IMD_SSIZE 0x0000f000
+#define TSI721_IMD_LETER 0x00030000
+#define TSI721_IMD_XMBOX 0x003c0000
+#define TSI721_IMD_MBOX 0x00c00000
+#define TSI721_IMD_CS 0x78000000
+#define TSI721_IMD_HO 0x80000000
+
+ __le32 bufptr_lo;
+ __le32 bufptr_hi;
+ u32 reserved[12];
+
+} __aligned(64);
+
+/*
+ * Outbound Messaging Descriptor
+ */
+struct tsi721_omsg_desc {
+ __le32 type_id;
+
+#define TSI721_OMD_DEVID 0x0000ffff
+#define TSI721_OMD_CRF 0x00010000
+#define TSI721_OMD_PRIO 0x00060000
+#define TSI721_OMD_IOF 0x08000000
+#define TSI721_OMD_DTYPE 0xe0000000
+#define TSI721_OMD_RSRVD 0x17f80000
+
+ __le32 msg_info;
+
+#define TSI721_OMD_BCOUNT 0x00000ff8
+#define TSI721_OMD_SSIZE 0x0000f000
+#define TSI721_OMD_LETER 0x00030000
+#define TSI721_OMD_XMBOX 0x003c0000
+#define TSI721_OMD_MBOX 0x00c00000
+#define TSI721_OMD_TT 0x0c000000
+
+ union {
+ __le32 bufptr_lo; /* if DTYPE == 4 */
+ __le32 next_lo; /* if DTYPE == 5 */
+ };
+
+ union {
+ __le32 bufptr_hi; /* if DTYPE == 4 */
+ __le32 next_hi; /* if DTYPE == 5 */
+ };
+
+} __aligned(16);
+
+struct tsi721_dma_sts {
+ __le64 desc_sts[8];
+} __aligned(64);
+
+struct tsi721_desc_sts_fifo {
+ union {
+ __le64 da64;
+ struct {
+ __le32 lo;
+ __le32 hi;
+ } da32;
+ } stat[8];
+} __aligned(64);
+
+/* Descriptor types for BDMA and Messaging blocks */
+enum dma_dtype {
+ DTYPE1 = 1, /* Data Transfer DMA Descriptor */
+ DTYPE2 = 2, /* Immediate Data Transfer DMA Descriptor */
+ DTYPE3 = 3, /* Block Pointer DMA Descriptor */
+ DTYPE4 = 4, /* Outbound Msg DMA Descriptor */
+ DTYPE5 = 5, /* OB Messaging Block Pointer Descriptor */
+ DTYPE6 = 6 /* Inbound Messaging Descriptor */
+};
+
+enum dma_rtype {
+ NREAD = 0,
+ LAST_NWRITE_R = 1,
+ ALL_NWRITE = 2,
+ ALL_NWRITE_R = 3,
+ MAINT_RD = 4,
+ MAINT_WR = 5
+};
+
+/*
+ * mport Driver Definitions
+ */
+#define TSI721_DMA_CHNUM TSI721_DMA_MAXCH
+
+#define TSI721_DMACH_MAINT 7 /* DMA channel for maint requests */
+#define TSI721_DMACH_MAINT_NBD 32 /* Number of BDs for maint requests */
+
+#define TSI721_DMACH_DMA 1 /* DMA channel for data transfers */
+
+#define MSG_DMA_ENTRY_INX_TO_SIZE(x) ((0x10 << (x)) & 0xFFFF0)
+
+enum tsi721_smsg_int_flag {
+ SMSG_INT_NONE = 0x00000000,
+ SMSG_INT_ECC_COR_CH = 0x000000ff,
+ SMSG_INT_ECC_NCOR_CH = 0x0000ff00,
+ SMSG_INT_ECC_COR = 0x00020000,
+ SMSG_INT_ECC_NCOR = 0x00040000,
+ SMSG_INT_UNS_RSP = 0x00800000,
+ SMSG_INT_ALL = 0x0006ffff
+};
+
+/* Structures */
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+#define TSI721_BDMA_MAX_BCOUNT (TSI721_DMAD_BCOUNT1 + 1)
+
+struct tsi721_tx_desc {
+ struct dma_async_tx_descriptor txd;
+ u16 destid;
+ /* low 64-bits of 66-bit RIO address */
+ u64 rio_addr;
+ /* upper 2-bits of 66-bit RIO address */
+ u8 rio_addr_u;
+ enum dma_rtype rtype;
+ struct list_head desc_node;
+ struct scatterlist *sg;
+ unsigned int sg_len;
+ enum dma_status status;
+};
+
+struct tsi721_bdma_chan {
+ int id;
+ void __iomem *regs;
+ int bd_num; /* number of HW buffer descriptors */
+ void *bd_base; /* start of DMA descriptors */
+ dma_addr_t bd_phys;
+ void *sts_base; /* start of DMA BD status FIFO */
+ dma_addr_t sts_phys;
+ int sts_size;
+ u32 sts_rdptr;
+ u32 wr_count;
+ u32 wr_count_next;
+
+ struct dma_chan dchan;
+ struct tsi721_tx_desc *tx_desc;
+ spinlock_t lock;
+ struct tsi721_tx_desc *active_tx;
+ struct list_head queue;
+ struct list_head free_list;
+ struct tasklet_struct tasklet;
+ bool active;
+};
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+struct tsi721_bdma_maint {
+ int ch_id; /* BDMA channel number */
+ int bd_num; /* number of buffer descriptors */
+ void *bd_base; /* start of DMA descriptors */
+ dma_addr_t bd_phys;
+ void *sts_base; /* start of DMA BD status FIFO */
+ dma_addr_t sts_phys;
+ int sts_size;
+};
+
+struct tsi721_imsg_ring {
+ u32 size;
+ /* VA/PA of data buffers for incoming messages */
+ void *buf_base;
+ dma_addr_t buf_phys;
+ /* VA/PA of circular free buffer list */
+ void *imfq_base;
+ dma_addr_t imfq_phys;
+ /* VA/PA of Inbound message descriptors */
+ void *imd_base;
+ dma_addr_t imd_phys;
+ /* Inbound Queue buffer pointers */
+ void *imq_base[TSI721_IMSGD_RING_SIZE];
+
+ u32 rx_slot;
+ void *dev_id;
+ u32 fq_wrptr;
+ u32 desc_rdptr;
+ spinlock_t lock;
+};
+
+struct tsi721_omsg_ring {
+ u32 size;
+ /* VA/PA of OB Msg descriptors */
+ void *omd_base;
+ dma_addr_t omd_phys;
+ /* VA/PA of OB Msg data buffers */
+ void *omq_base[TSI721_OMSGD_RING_SIZE];
+ dma_addr_t omq_phys[TSI721_OMSGD_RING_SIZE];
+ /* VA/PA of OB Msg descriptor status FIFO */
+ void *sts_base;
+ dma_addr_t sts_phys;
+ u32 sts_size; /* # of allocated status entries */
+ u32 sts_rdptr;
+
+ u32 tx_slot;
+ void *dev_id;
+ u32 wr_count;
+ spinlock_t lock;
+};
+
+enum tsi721_flags {
+ TSI721_USING_MSI = (1 << 0),
+ TSI721_USING_MSIX = (1 << 1),
+ TSI721_IMSGID_SET = (1 << 2),
+};
+
+#ifdef CONFIG_PCI_MSI
+/*
+ * MSI-X Table Entries (0 ... 69)
+ */
+#define TSI721_MSIX_DMACH_DONE(x) (0 + (x))
+#define TSI721_MSIX_DMACH_INT(x) (8 + (x))
+#define TSI721_MSIX_BDMA_INT 16
+#define TSI721_MSIX_OMSG_DONE(x) (17 + (x))
+#define TSI721_MSIX_OMSG_INT(x) (25 + (x))
+#define TSI721_MSIX_IMSG_DQ_RCV(x) (33 + (x))
+#define TSI721_MSIX_IMSG_INT(x) (41 + (x))
+#define TSI721_MSIX_MSG_INT 49
+#define TSI721_MSIX_SR2PC_IDBQ_RCV(x) (50 + (x))
+#define TSI721_MSIX_SR2PC_CH_INT(x) (58 + (x))
+#define TSI721_MSIX_SR2PC_INT 66
+#define TSI721_MSIX_PC2SR_INT 67
+#define TSI721_MSIX_SRIO_MAC_INT 68
+#define TSI721_MSIX_I2C_INT 69
+
+/* MSI-X vector and init table entry indexes */
+enum tsi721_msix_vect {
+ TSI721_VECT_IDB,
+ TSI721_VECT_PWRX, /* PW_RX is part of SRIO MAC Interrupt reporting */
+ TSI721_VECT_OMB0_DONE,
+ TSI721_VECT_OMB1_DONE,
+ TSI721_VECT_OMB2_DONE,
+ TSI721_VECT_OMB3_DONE,
+ TSI721_VECT_OMB0_INT,
+ TSI721_VECT_OMB1_INT,
+ TSI721_VECT_OMB2_INT,
+ TSI721_VECT_OMB3_INT,
+ TSI721_VECT_IMB0_RCV,
+ TSI721_VECT_IMB1_RCV,
+ TSI721_VECT_IMB2_RCV,
+ TSI721_VECT_IMB3_RCV,
+ TSI721_VECT_IMB0_INT,
+ TSI721_VECT_IMB1_INT,
+ TSI721_VECT_IMB2_INT,
+ TSI721_VECT_IMB3_INT,
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ TSI721_VECT_DMA0_DONE,
+ TSI721_VECT_DMA1_DONE,
+ TSI721_VECT_DMA2_DONE,
+ TSI721_VECT_DMA3_DONE,
+ TSI721_VECT_DMA4_DONE,
+ TSI721_VECT_DMA5_DONE,
+ TSI721_VECT_DMA6_DONE,
+ TSI721_VECT_DMA7_DONE,
+ TSI721_VECT_DMA0_INT,
+ TSI721_VECT_DMA1_INT,
+ TSI721_VECT_DMA2_INT,
+ TSI721_VECT_DMA3_INT,
+ TSI721_VECT_DMA4_INT,
+ TSI721_VECT_DMA5_INT,
+ TSI721_VECT_DMA6_INT,
+ TSI721_VECT_DMA7_INT,
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+ TSI721_VECT_MAX
+};
+
+#define IRQ_DEVICE_NAME_MAX 64
+
+struct msix_irq {
+ u16 vector;
+ char irq_name[IRQ_DEVICE_NAME_MAX];
+};
+#endif /* CONFIG_PCI_MSI */
+
+struct tsi721_ib_win_mapping {
+ struct list_head node;
+ dma_addr_t lstart;
+};
+
+struct tsi721_ib_win {
+ u64 rstart;
+ u32 size;
+ dma_addr_t lstart;
+ bool active;
+ bool xlat;
+ struct list_head mappings;
+};
+
+struct tsi721_obw_bar {
+ u64 base;
+ u64 size;
+ u64 free;
+};
+
+struct tsi721_ob_win {
+ u64 base;
+ u32 size;
+ u16 destid;
+ u64 rstart;
+ bool active;
+ struct tsi721_obw_bar *pbar;
+};
+
+struct tsi721_device {
+ struct pci_dev *pdev;
+ struct rio_mport mport;
+ u32 flags;
+ void __iomem *regs;
+#ifdef CONFIG_PCI_MSI
+ struct msix_irq msix[TSI721_VECT_MAX];
+#endif
+ /* Doorbells */
+ void __iomem *odb_base;
+ void *idb_base;
+ dma_addr_t idb_dma;
+ struct work_struct idb_work;
+ u32 db_discard_count;
+
+ /* Inbound Port-Write */
+ struct work_struct pw_work;
+ struct kfifo pw_fifo;
+ spinlock_t pw_fifo_lock;
+ u32 pw_discard_count;
+
+ /* BDMA Engine */
+ struct tsi721_bdma_maint mdma; /* Maintenance rd/wr request channel */
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+ struct tsi721_bdma_chan bdma[TSI721_DMA_CHNUM];
+#endif
+
+ /* Inbound Messaging */
+ int imsg_init[TSI721_IMSG_CHNUM];
+ struct tsi721_imsg_ring imsg_ring[TSI721_IMSG_CHNUM];
+
+ /* Outbound Messaging */
+ int omsg_init[TSI721_OMSG_CHNUM];
+ struct tsi721_omsg_ring omsg_ring[TSI721_OMSG_CHNUM];
+
+ /* Inbound Mapping Windows */
+ struct tsi721_ib_win ib_win[TSI721_IBWIN_NUM];
+ int ibwin_cnt;
+
+ /* Outbound Mapping Windows */
+ struct tsi721_obw_bar p2r_bar[2];
+ struct tsi721_ob_win ob_win[TSI721_OBWIN_NUM];
+ int obwin_cnt;
+};
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+extern void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan);
+extern int tsi721_register_dma(struct tsi721_device *priv);
+extern void tsi721_unregister_dma(struct tsi721_device *priv);
+extern void tsi721_dma_stop_all(struct tsi721_device *priv);
+#else
+#define tsi721_dma_stop_all(priv) do {} while (0)
+#define tsi721_unregister_dma(priv) do {} while (0)
+#endif
+
+#endif
diff --git a/drivers/rapidio/devices/tsi721_dma.c b/drivers/rapidio/devices/tsi721_dma.c
new file mode 100644
index 000000000..d375c0205
--- /dev/null
+++ b/drivers/rapidio/devices/tsi721_dma.c
@@ -0,0 +1,1042 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DMA Engine support for Tsi721 PCIExpress-to-SRIO bridge
+ *
+ * Copyright (c) 2011-2014 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/kfifo.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include "../../dma/dmaengine.h"
+
+#include "tsi721.h"
+
+#ifdef CONFIG_PCI_MSI
+static irqreturn_t tsi721_bdma_msix(int irq, void *ptr);
+#endif
+static int tsi721_submit_sg(struct tsi721_tx_desc *desc);
+
+static unsigned int dma_desc_per_channel = 128;
+module_param(dma_desc_per_channel, uint, S_IRUGO);
+MODULE_PARM_DESC(dma_desc_per_channel,
+ "Number of DMA descriptors per channel (default: 128)");
+
+static unsigned int dma_txqueue_sz = 16;
+module_param(dma_txqueue_sz, uint, S_IRUGO);
+MODULE_PARM_DESC(dma_txqueue_sz,
+ "DMA Transactions Queue Size (default: 16)");
+
+static u8 dma_sel = 0x7f;
+module_param(dma_sel, byte, S_IRUGO);
+MODULE_PARM_DESC(dma_sel,
+ "DMA Channel Selection Mask (default: 0x7f = all)");
+
+static inline struct tsi721_bdma_chan *to_tsi721_chan(struct dma_chan *chan)
+{
+ return container_of(chan, struct tsi721_bdma_chan, dchan);
+}
+
+static inline struct tsi721_device *to_tsi721(struct dma_device *ddev)
+{
+ return container_of(ddev, struct rio_mport, dma)->priv;
+}
+
+static inline
+struct tsi721_tx_desc *to_tsi721_desc(struct dma_async_tx_descriptor *txd)
+{
+ return container_of(txd, struct tsi721_tx_desc, txd);
+}
+
+static int tsi721_bdma_ch_init(struct tsi721_bdma_chan *bdma_chan, int bd_num)
+{
+ struct tsi721_dma_desc *bd_ptr;
+ struct device *dev = bdma_chan->dchan.device->dev;
+ u64 *sts_ptr;
+ dma_addr_t bd_phys;
+ dma_addr_t sts_phys;
+ int sts_size;
+#ifdef CONFIG_PCI_MSI
+ struct tsi721_device *priv = to_tsi721(bdma_chan->dchan.device);
+#endif
+
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device, "DMAC%d", bdma_chan->id);
+
+ /*
+ * Allocate space for DMA descriptors
+ * (add an extra element for link descriptor)
+ */
+ bd_ptr = dma_alloc_coherent(dev,
+ (bd_num + 1) * sizeof(struct tsi721_dma_desc),
+ &bd_phys, GFP_ATOMIC);
+ if (!bd_ptr)
+ return -ENOMEM;
+
+ bdma_chan->bd_num = bd_num;
+ bdma_chan->bd_phys = bd_phys;
+ bdma_chan->bd_base = bd_ptr;
+
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device,
+ "DMAC%d descriptors @ %p (phys = %pad)",
+ bdma_chan->id, bd_ptr, &bd_phys);
+
+ /* Allocate space for descriptor status FIFO */
+ sts_size = ((bd_num + 1) >= TSI721_DMA_MINSTSSZ) ?
+ (bd_num + 1) : TSI721_DMA_MINSTSSZ;
+ sts_size = roundup_pow_of_two(sts_size);
+ sts_ptr = dma_alloc_coherent(dev,
+ sts_size * sizeof(struct tsi721_dma_sts),
+ &sts_phys, GFP_ATOMIC);
+ if (!sts_ptr) {
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(dev,
+ (bd_num + 1) * sizeof(struct tsi721_dma_desc),
+ bd_ptr, bd_phys);
+ bdma_chan->bd_base = NULL;
+ return -ENOMEM;
+ }
+
+ bdma_chan->sts_phys = sts_phys;
+ bdma_chan->sts_base = sts_ptr;
+ bdma_chan->sts_size = sts_size;
+
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device,
+ "DMAC%d desc status FIFO @ %p (phys = %pad) size=0x%x",
+ bdma_chan->id, sts_ptr, &sts_phys, sts_size);
+
+ /* Initialize DMA descriptors ring using added link descriptor */
+ bd_ptr[bd_num].type_id = cpu_to_le32(DTYPE3 << 29);
+ bd_ptr[bd_num].next_lo = cpu_to_le32((u64)bd_phys &
+ TSI721_DMAC_DPTRL_MASK);
+ bd_ptr[bd_num].next_hi = cpu_to_le32((u64)bd_phys >> 32);
+
+ /* Setup DMA descriptor pointers */
+ iowrite32(((u64)bd_phys >> 32),
+ bdma_chan->regs + TSI721_DMAC_DPTRH);
+ iowrite32(((u64)bd_phys & TSI721_DMAC_DPTRL_MASK),
+ bdma_chan->regs + TSI721_DMAC_DPTRL);
+
+ /* Setup descriptor status FIFO */
+ iowrite32(((u64)sts_phys >> 32),
+ bdma_chan->regs + TSI721_DMAC_DSBH);
+ iowrite32(((u64)sts_phys & TSI721_DMAC_DSBL_MASK),
+ bdma_chan->regs + TSI721_DMAC_DSBL);
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(sts_size),
+ bdma_chan->regs + TSI721_DMAC_DSSZ);
+
+ /* Clear interrupt bits */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ bdma_chan->regs + TSI721_DMAC_INT);
+
+ ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+
+#ifdef CONFIG_PCI_MSI
+ /* Request interrupt service if we are in MSI-X mode */
+ if (priv->flags & TSI721_USING_MSIX) {
+ int rc, idx;
+
+ idx = TSI721_VECT_DMA0_DONE + bdma_chan->id;
+
+ rc = request_irq(priv->msix[idx].vector, tsi721_bdma_msix, 0,
+ priv->msix[idx].irq_name, (void *)bdma_chan);
+
+ if (rc) {
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device,
+ "Unable to get MSI-X for DMAC%d-DONE",
+ bdma_chan->id);
+ goto err_out;
+ }
+
+ idx = TSI721_VECT_DMA0_INT + bdma_chan->id;
+
+ rc = request_irq(priv->msix[idx].vector, tsi721_bdma_msix, 0,
+ priv->msix[idx].irq_name, (void *)bdma_chan);
+
+ if (rc) {
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device,
+ "Unable to get MSI-X for DMAC%d-INT",
+ bdma_chan->id);
+ free_irq(
+ priv->msix[TSI721_VECT_DMA0_DONE +
+ bdma_chan->id].vector,
+ (void *)bdma_chan);
+ }
+
+err_out:
+ if (rc) {
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(dev,
+ (bd_num + 1) * sizeof(struct tsi721_dma_desc),
+ bd_ptr, bd_phys);
+ bdma_chan->bd_base = NULL;
+
+ /* Free space allocated for status descriptors */
+ dma_free_coherent(dev,
+ sts_size * sizeof(struct tsi721_dma_sts),
+ sts_ptr, sts_phys);
+ bdma_chan->sts_base = NULL;
+
+ return -EIO;
+ }
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Toggle DMA channel initialization */
+ iowrite32(TSI721_DMAC_CTL_INIT, bdma_chan->regs + TSI721_DMAC_CTL);
+ ioread32(bdma_chan->regs + TSI721_DMAC_CTL);
+ bdma_chan->wr_count = bdma_chan->wr_count_next = 0;
+ bdma_chan->sts_rdptr = 0;
+ udelay(10);
+
+ return 0;
+}
+
+static int tsi721_bdma_ch_free(struct tsi721_bdma_chan *bdma_chan)
+{
+ u32 ch_stat;
+#ifdef CONFIG_PCI_MSI
+ struct tsi721_device *priv = to_tsi721(bdma_chan->dchan.device);
+#endif
+
+ if (!bdma_chan->bd_base)
+ return 0;
+
+ /* Check if DMA channel still running */
+ ch_stat = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+ if (ch_stat & TSI721_DMAC_STS_RUN)
+ return -EFAULT;
+
+ /* Put DMA channel into init state */
+ iowrite32(TSI721_DMAC_CTL_INIT, bdma_chan->regs + TSI721_DMAC_CTL);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ free_irq(priv->msix[TSI721_VECT_DMA0_DONE +
+ bdma_chan->id].vector, (void *)bdma_chan);
+ free_irq(priv->msix[TSI721_VECT_DMA0_INT +
+ bdma_chan->id].vector, (void *)bdma_chan);
+ }
+#endif /* CONFIG_PCI_MSI */
+
+ /* Free space allocated for DMA descriptors */
+ dma_free_coherent(bdma_chan->dchan.device->dev,
+ (bdma_chan->bd_num + 1) * sizeof(struct tsi721_dma_desc),
+ bdma_chan->bd_base, bdma_chan->bd_phys);
+ bdma_chan->bd_base = NULL;
+
+ /* Free space allocated for status FIFO */
+ dma_free_coherent(bdma_chan->dchan.device->dev,
+ bdma_chan->sts_size * sizeof(struct tsi721_dma_sts),
+ bdma_chan->sts_base, bdma_chan->sts_phys);
+ bdma_chan->sts_base = NULL;
+ return 0;
+}
+
+static void
+tsi721_bdma_interrupt_enable(struct tsi721_bdma_chan *bdma_chan, int enable)
+{
+ if (enable) {
+ /* Clear pending BDMA channel interrupts */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ bdma_chan->regs + TSI721_DMAC_INT);
+ ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+ /* Enable BDMA channel interrupts */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ bdma_chan->regs + TSI721_DMAC_INTE);
+ } else {
+ /* Disable BDMA channel interrupts */
+ iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
+ /* Clear pending BDMA channel interrupts */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ bdma_chan->regs + TSI721_DMAC_INT);
+ }
+
+}
+
+static bool tsi721_dma_is_idle(struct tsi721_bdma_chan *bdma_chan)
+{
+ u32 sts;
+
+ sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+ return ((sts & TSI721_DMAC_STS_RUN) == 0);
+}
+
+void tsi721_bdma_handler(struct tsi721_bdma_chan *bdma_chan)
+{
+ /* Disable BDMA channel interrupts */
+ iowrite32(0, bdma_chan->regs + TSI721_DMAC_INTE);
+ if (bdma_chan->active)
+ tasklet_hi_schedule(&bdma_chan->tasklet);
+}
+
+#ifdef CONFIG_PCI_MSI
+/**
+ * tsi721_omsg_msix - MSI-X interrupt handler for BDMA channels
+ * @irq: Linux interrupt number
+ * @ptr: Pointer to interrupt-specific data (BDMA channel structure)
+ *
+ * Handles BDMA channel interrupts signaled using MSI-X.
+ */
+static irqreturn_t tsi721_bdma_msix(int irq, void *ptr)
+{
+ struct tsi721_bdma_chan *bdma_chan = ptr;
+
+ if (bdma_chan->active)
+ tasklet_hi_schedule(&bdma_chan->tasklet);
+ return IRQ_HANDLED;
+}
+#endif /* CONFIG_PCI_MSI */
+
+/* Must be called with the spinlock held */
+static void tsi721_start_dma(struct tsi721_bdma_chan *bdma_chan)
+{
+ if (!tsi721_dma_is_idle(bdma_chan)) {
+ tsi_err(&bdma_chan->dchan.dev->device,
+ "DMAC%d Attempt to start non-idle channel",
+ bdma_chan->id);
+ return;
+ }
+
+ if (bdma_chan->wr_count == bdma_chan->wr_count_next) {
+ tsi_err(&bdma_chan->dchan.dev->device,
+ "DMAC%d Attempt to start DMA with no BDs ready %d",
+ bdma_chan->id, task_pid_nr(current));
+ return;
+ }
+
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device, "DMAC%d (wrc=%d) %d",
+ bdma_chan->id, bdma_chan->wr_count_next,
+ task_pid_nr(current));
+
+ iowrite32(bdma_chan->wr_count_next,
+ bdma_chan->regs + TSI721_DMAC_DWRCNT);
+ ioread32(bdma_chan->regs + TSI721_DMAC_DWRCNT);
+
+ bdma_chan->wr_count = bdma_chan->wr_count_next;
+}
+
+static int
+tsi721_desc_fill_init(struct tsi721_tx_desc *desc,
+ struct tsi721_dma_desc *bd_ptr,
+ struct scatterlist *sg, u32 sys_size)
+{
+ u64 rio_addr;
+
+ if (!bd_ptr)
+ return -EINVAL;
+
+ /* Initialize DMA descriptor */
+ bd_ptr->type_id = cpu_to_le32((DTYPE1 << 29) |
+ (desc->rtype << 19) | desc->destid);
+ bd_ptr->bcount = cpu_to_le32(((desc->rio_addr & 0x3) << 30) |
+ (sys_size << 26));
+ rio_addr = (desc->rio_addr >> 2) |
+ ((u64)(desc->rio_addr_u & 0x3) << 62);
+ bd_ptr->raddr_lo = cpu_to_le32(rio_addr & 0xffffffff);
+ bd_ptr->raddr_hi = cpu_to_le32(rio_addr >> 32);
+ bd_ptr->t1.bufptr_lo = cpu_to_le32(
+ (u64)sg_dma_address(sg) & 0xffffffff);
+ bd_ptr->t1.bufptr_hi = cpu_to_le32((u64)sg_dma_address(sg) >> 32);
+ bd_ptr->t1.s_dist = 0;
+ bd_ptr->t1.s_size = 0;
+
+ return 0;
+}
+
+static int
+tsi721_desc_fill_end(struct tsi721_dma_desc *bd_ptr, u32 bcount, bool interrupt)
+{
+ if (!bd_ptr)
+ return -EINVAL;
+
+ /* Update DMA descriptor */
+ if (interrupt)
+ bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
+ bd_ptr->bcount |= cpu_to_le32(bcount & TSI721_DMAD_BCOUNT1);
+
+ return 0;
+}
+
+static void tsi721_dma_tx_err(struct tsi721_bdma_chan *bdma_chan,
+ struct tsi721_tx_desc *desc)
+{
+ struct dma_async_tx_descriptor *txd = &desc->txd;
+ dma_async_tx_callback callback = txd->callback;
+ void *param = txd->callback_param;
+
+ list_move(&desc->desc_node, &bdma_chan->free_list);
+
+ if (callback)
+ callback(param);
+}
+
+static void tsi721_clr_stat(struct tsi721_bdma_chan *bdma_chan)
+{
+ u32 srd_ptr;
+ u64 *sts_ptr;
+ int i, j;
+
+ /* Check and clear descriptor status FIFO entries */
+ srd_ptr = bdma_chan->sts_rdptr;
+ sts_ptr = bdma_chan->sts_base;
+ j = srd_ptr * 8;
+ while (sts_ptr[j]) {
+ for (i = 0; i < 8 && sts_ptr[j]; i++, j++)
+ sts_ptr[j] = 0;
+
+ ++srd_ptr;
+ srd_ptr %= bdma_chan->sts_size;
+ j = srd_ptr * 8;
+ }
+
+ iowrite32(srd_ptr, bdma_chan->regs + TSI721_DMAC_DSRP);
+ bdma_chan->sts_rdptr = srd_ptr;
+}
+
+/* Must be called with the channel spinlock held */
+static int tsi721_submit_sg(struct tsi721_tx_desc *desc)
+{
+ struct dma_chan *dchan = desc->txd.chan;
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+ u32 sys_size;
+ u64 rio_addr;
+ dma_addr_t next_addr;
+ u32 bcount;
+ struct scatterlist *sg;
+ unsigned int i;
+ int err = 0;
+ struct tsi721_dma_desc *bd_ptr = NULL;
+ u32 idx, rd_idx;
+ u32 add_count = 0;
+ struct device *ch_dev = &dchan->dev->device;
+
+ if (!tsi721_dma_is_idle(bdma_chan)) {
+ tsi_err(ch_dev, "DMAC%d ERR: Attempt to use non-idle channel",
+ bdma_chan->id);
+ return -EIO;
+ }
+
+ /*
+ * Fill DMA channel's hardware buffer descriptors.
+ * (NOTE: RapidIO destination address is limited to 64 bits for now)
+ */
+ rio_addr = desc->rio_addr;
+ next_addr = -1;
+ bcount = 0;
+ sys_size = dma_to_mport(dchan->device)->sys_size;
+
+ rd_idx = ioread32(bdma_chan->regs + TSI721_DMAC_DRDCNT);
+ rd_idx %= (bdma_chan->bd_num + 1);
+
+ idx = bdma_chan->wr_count_next % (bdma_chan->bd_num + 1);
+ if (idx == bdma_chan->bd_num) {
+ /* wrap around link descriptor */
+ idx = 0;
+ add_count++;
+ }
+
+ tsi_debug(DMA, ch_dev, "DMAC%d BD ring status: rdi=%d wri=%d",
+ bdma_chan->id, rd_idx, idx);
+
+ for_each_sg(desc->sg, sg, desc->sg_len, i) {
+
+ tsi_debug(DMAV, ch_dev, "DMAC%d sg%d/%d addr: 0x%llx len: %d",
+ bdma_chan->id, i, desc->sg_len,
+ (unsigned long long)sg_dma_address(sg), sg_dma_len(sg));
+
+ if (sg_dma_len(sg) > TSI721_BDMA_MAX_BCOUNT) {
+ tsi_err(ch_dev, "DMAC%d SG entry %d is too large",
+ bdma_chan->id, i);
+ err = -EINVAL;
+ break;
+ }
+
+ /*
+ * If this sg entry forms contiguous block with previous one,
+ * try to merge it into existing DMA descriptor
+ */
+ if (next_addr == sg_dma_address(sg) &&
+ bcount + sg_dma_len(sg) <= TSI721_BDMA_MAX_BCOUNT) {
+ /* Adjust byte count of the descriptor */
+ bcount += sg_dma_len(sg);
+ goto entry_done;
+ } else if (next_addr != -1) {
+ /* Finalize descriptor using total byte count value */
+ tsi721_desc_fill_end(bd_ptr, bcount, 0);
+ tsi_debug(DMAV, ch_dev, "DMAC%d prev desc final len: %d",
+ bdma_chan->id, bcount);
+ }
+
+ desc->rio_addr = rio_addr;
+
+ if (i && idx == rd_idx) {
+ tsi_debug(DMAV, ch_dev,
+ "DMAC%d HW descriptor ring is full @ %d",
+ bdma_chan->id, i);
+ desc->sg = sg;
+ desc->sg_len -= i;
+ break;
+ }
+
+ bd_ptr = &((struct tsi721_dma_desc *)bdma_chan->bd_base)[idx];
+ err = tsi721_desc_fill_init(desc, bd_ptr, sg, sys_size);
+ if (err) {
+ tsi_err(ch_dev, "Failed to build desc: err=%d", err);
+ break;
+ }
+
+ tsi_debug(DMAV, ch_dev, "DMAC%d bd_ptr = %p did=%d raddr=0x%llx",
+ bdma_chan->id, bd_ptr, desc->destid, desc->rio_addr);
+
+ next_addr = sg_dma_address(sg);
+ bcount = sg_dma_len(sg);
+
+ add_count++;
+ if (++idx == bdma_chan->bd_num) {
+ /* wrap around link descriptor */
+ idx = 0;
+ add_count++;
+ }
+
+entry_done:
+ if (sg_is_last(sg)) {
+ tsi721_desc_fill_end(bd_ptr, bcount, 0);
+ tsi_debug(DMAV, ch_dev,
+ "DMAC%d last desc final len: %d",
+ bdma_chan->id, bcount);
+ desc->sg_len = 0;
+ } else {
+ rio_addr += sg_dma_len(sg);
+ next_addr += sg_dma_len(sg);
+ }
+ }
+
+ if (!err)
+ bdma_chan->wr_count_next += add_count;
+
+ return err;
+}
+
+static void tsi721_advance_work(struct tsi721_bdma_chan *bdma_chan,
+ struct tsi721_tx_desc *desc)
+{
+ int err;
+
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device, "DMAC%d", bdma_chan->id);
+
+ if (!tsi721_dma_is_idle(bdma_chan))
+ return;
+
+ /*
+ * If there is no data transfer in progress, fetch new descriptor from
+ * the pending queue.
+ */
+ if (!desc && !bdma_chan->active_tx && !list_empty(&bdma_chan->queue)) {
+ desc = list_first_entry(&bdma_chan->queue,
+ struct tsi721_tx_desc, desc_node);
+ list_del_init((&desc->desc_node));
+ bdma_chan->active_tx = desc;
+ }
+
+ if (desc) {
+ err = tsi721_submit_sg(desc);
+ if (!err)
+ tsi721_start_dma(bdma_chan);
+ else {
+ tsi721_dma_tx_err(bdma_chan, desc);
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device,
+ "DMAC%d ERR: tsi721_submit_sg failed with err=%d",
+ bdma_chan->id, err);
+ }
+ }
+
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device, "DMAC%d Exit",
+ bdma_chan->id);
+}
+
+static void tsi721_dma_tasklet(unsigned long data)
+{
+ struct tsi721_bdma_chan *bdma_chan = (struct tsi721_bdma_chan *)data;
+ u32 dmac_int, dmac_sts;
+
+ dmac_int = ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+ tsi_debug(DMA, &bdma_chan->dchan.dev->device, "DMAC%d_INT = 0x%x",
+ bdma_chan->id, dmac_int);
+ /* Clear channel interrupts */
+ iowrite32(dmac_int, bdma_chan->regs + TSI721_DMAC_INT);
+
+ if (dmac_int & TSI721_DMAC_INT_ERR) {
+ int i = 10000;
+ struct tsi721_tx_desc *desc;
+
+ desc = bdma_chan->active_tx;
+ dmac_sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+ tsi_err(&bdma_chan->dchan.dev->device,
+ "DMAC%d_STS = 0x%x did=%d raddr=0x%llx",
+ bdma_chan->id, dmac_sts, desc->destid, desc->rio_addr);
+
+ /* Re-initialize DMA channel if possible */
+
+ if ((dmac_sts & TSI721_DMAC_STS_ABORT) == 0)
+ goto err_out;
+
+ tsi721_clr_stat(bdma_chan);
+
+ spin_lock(&bdma_chan->lock);
+
+ /* Put DMA channel into init state */
+ iowrite32(TSI721_DMAC_CTL_INIT,
+ bdma_chan->regs + TSI721_DMAC_CTL);
+ do {
+ udelay(1);
+ dmac_sts = ioread32(bdma_chan->regs + TSI721_DMAC_STS);
+ i--;
+ } while ((dmac_sts & TSI721_DMAC_STS_ABORT) && i);
+
+ if (dmac_sts & TSI721_DMAC_STS_ABORT) {
+ tsi_err(&bdma_chan->dchan.dev->device,
+ "Failed to re-initiate DMAC%d", bdma_chan->id);
+ spin_unlock(&bdma_chan->lock);
+ goto err_out;
+ }
+
+ /* Setup DMA descriptor pointers */
+ iowrite32(((u64)bdma_chan->bd_phys >> 32),
+ bdma_chan->regs + TSI721_DMAC_DPTRH);
+ iowrite32(((u64)bdma_chan->bd_phys & TSI721_DMAC_DPTRL_MASK),
+ bdma_chan->regs + TSI721_DMAC_DPTRL);
+
+ /* Setup descriptor status FIFO */
+ iowrite32(((u64)bdma_chan->sts_phys >> 32),
+ bdma_chan->regs + TSI721_DMAC_DSBH);
+ iowrite32(((u64)bdma_chan->sts_phys & TSI721_DMAC_DSBL_MASK),
+ bdma_chan->regs + TSI721_DMAC_DSBL);
+ iowrite32(TSI721_DMAC_DSSZ_SIZE(bdma_chan->sts_size),
+ bdma_chan->regs + TSI721_DMAC_DSSZ);
+
+ /* Clear interrupt bits */
+ iowrite32(TSI721_DMAC_INT_ALL,
+ bdma_chan->regs + TSI721_DMAC_INT);
+
+ ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+
+ bdma_chan->wr_count = bdma_chan->wr_count_next = 0;
+ bdma_chan->sts_rdptr = 0;
+ udelay(10);
+
+ desc = bdma_chan->active_tx;
+ desc->status = DMA_ERROR;
+ dma_cookie_complete(&desc->txd);
+ list_add(&desc->desc_node, &bdma_chan->free_list);
+ bdma_chan->active_tx = NULL;
+ if (bdma_chan->active)
+ tsi721_advance_work(bdma_chan, NULL);
+ spin_unlock(&bdma_chan->lock);
+ }
+
+ if (dmac_int & TSI721_DMAC_INT_STFULL) {
+ tsi_err(&bdma_chan->dchan.dev->device,
+ "DMAC%d descriptor status FIFO is full",
+ bdma_chan->id);
+ }
+
+ if (dmac_int & (TSI721_DMAC_INT_DONE | TSI721_DMAC_INT_IOFDONE)) {
+ struct tsi721_tx_desc *desc;
+
+ tsi721_clr_stat(bdma_chan);
+ spin_lock(&bdma_chan->lock);
+ desc = bdma_chan->active_tx;
+
+ if (desc->sg_len == 0) {
+ dma_async_tx_callback callback = NULL;
+ void *param = NULL;
+
+ desc->status = DMA_COMPLETE;
+ dma_cookie_complete(&desc->txd);
+ if (desc->txd.flags & DMA_PREP_INTERRUPT) {
+ callback = desc->txd.callback;
+ param = desc->txd.callback_param;
+ }
+ list_add(&desc->desc_node, &bdma_chan->free_list);
+ bdma_chan->active_tx = NULL;
+ if (bdma_chan->active)
+ tsi721_advance_work(bdma_chan, NULL);
+ spin_unlock(&bdma_chan->lock);
+ if (callback)
+ callback(param);
+ } else {
+ if (bdma_chan->active)
+ tsi721_advance_work(bdma_chan,
+ bdma_chan->active_tx);
+ spin_unlock(&bdma_chan->lock);
+ }
+ }
+err_out:
+ /* Re-Enable BDMA channel interrupts */
+ iowrite32(TSI721_DMAC_INT_ALL, bdma_chan->regs + TSI721_DMAC_INTE);
+}
+
+static dma_cookie_t tsi721_tx_submit(struct dma_async_tx_descriptor *txd)
+{
+ struct tsi721_tx_desc *desc = to_tsi721_desc(txd);
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(txd->chan);
+ dma_cookie_t cookie;
+
+ /* Check if the descriptor is detached from any lists */
+ if (!list_empty(&desc->desc_node)) {
+ tsi_err(&bdma_chan->dchan.dev->device,
+ "DMAC%d wrong state of descriptor %p",
+ bdma_chan->id, txd);
+ return -EIO;
+ }
+
+ spin_lock_bh(&bdma_chan->lock);
+
+ if (!bdma_chan->active) {
+ spin_unlock_bh(&bdma_chan->lock);
+ return -ENODEV;
+ }
+
+ cookie = dma_cookie_assign(txd);
+ desc->status = DMA_IN_PROGRESS;
+ list_add_tail(&desc->desc_node, &bdma_chan->queue);
+ tsi721_advance_work(bdma_chan, NULL);
+
+ spin_unlock_bh(&bdma_chan->lock);
+ return cookie;
+}
+
+static int tsi721_alloc_chan_resources(struct dma_chan *dchan)
+{
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+ struct tsi721_tx_desc *desc;
+ int i;
+
+ tsi_debug(DMA, &dchan->dev->device, "DMAC%d", bdma_chan->id);
+
+ if (bdma_chan->bd_base)
+ return dma_txqueue_sz;
+
+ /* Initialize BDMA channel */
+ if (tsi721_bdma_ch_init(bdma_chan, dma_desc_per_channel)) {
+ tsi_err(&dchan->dev->device, "Unable to initialize DMAC%d",
+ bdma_chan->id);
+ return -ENODEV;
+ }
+
+ /* Allocate queue of transaction descriptors */
+ desc = kcalloc(dma_txqueue_sz, sizeof(struct tsi721_tx_desc),
+ GFP_ATOMIC);
+ if (!desc) {
+ tsi721_bdma_ch_free(bdma_chan);
+ return -ENOMEM;
+ }
+
+ bdma_chan->tx_desc = desc;
+
+ for (i = 0; i < dma_txqueue_sz; i++) {
+ dma_async_tx_descriptor_init(&desc[i].txd, dchan);
+ desc[i].txd.tx_submit = tsi721_tx_submit;
+ desc[i].txd.flags = DMA_CTRL_ACK;
+ list_add(&desc[i].desc_node, &bdma_chan->free_list);
+ }
+
+ dma_cookie_init(dchan);
+
+ bdma_chan->active = true;
+ tsi721_bdma_interrupt_enable(bdma_chan, 1);
+
+ return dma_txqueue_sz;
+}
+
+static void tsi721_sync_dma_irq(struct tsi721_bdma_chan *bdma_chan)
+{
+ struct tsi721_device *priv = to_tsi721(bdma_chan->dchan.device);
+
+#ifdef CONFIG_PCI_MSI
+ if (priv->flags & TSI721_USING_MSIX) {
+ synchronize_irq(priv->msix[TSI721_VECT_DMA0_DONE +
+ bdma_chan->id].vector);
+ synchronize_irq(priv->msix[TSI721_VECT_DMA0_INT +
+ bdma_chan->id].vector);
+ } else
+#endif
+ synchronize_irq(priv->pdev->irq);
+}
+
+static void tsi721_free_chan_resources(struct dma_chan *dchan)
+{
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+
+ tsi_debug(DMA, &dchan->dev->device, "DMAC%d", bdma_chan->id);
+
+ if (!bdma_chan->bd_base)
+ return;
+
+ tsi721_bdma_interrupt_enable(bdma_chan, 0);
+ bdma_chan->active = false;
+ tsi721_sync_dma_irq(bdma_chan);
+ tasklet_kill(&bdma_chan->tasklet);
+ INIT_LIST_HEAD(&bdma_chan->free_list);
+ kfree(bdma_chan->tx_desc);
+ tsi721_bdma_ch_free(bdma_chan);
+}
+
+static
+enum dma_status tsi721_tx_status(struct dma_chan *dchan, dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+ enum dma_status status;
+
+ spin_lock_bh(&bdma_chan->lock);
+ status = dma_cookie_status(dchan, cookie, txstate);
+ spin_unlock_bh(&bdma_chan->lock);
+ return status;
+}
+
+static void tsi721_issue_pending(struct dma_chan *dchan)
+{
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+
+ tsi_debug(DMA, &dchan->dev->device, "DMAC%d", bdma_chan->id);
+
+ spin_lock_bh(&bdma_chan->lock);
+ if (tsi721_dma_is_idle(bdma_chan) && bdma_chan->active) {
+ tsi721_advance_work(bdma_chan, NULL);
+ }
+ spin_unlock_bh(&bdma_chan->lock);
+}
+
+static
+struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan,
+ struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_transfer_direction dir, unsigned long flags,
+ void *tinfo)
+{
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+ struct tsi721_tx_desc *desc;
+ struct rio_dma_ext *rext = tinfo;
+ enum dma_rtype rtype;
+ struct dma_async_tx_descriptor *txd = NULL;
+
+ if (!sgl || !sg_len) {
+ tsi_err(&dchan->dev->device, "DMAC%d No SG list",
+ bdma_chan->id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ tsi_debug(DMA, &dchan->dev->device, "DMAC%d %s", bdma_chan->id,
+ (dir == DMA_DEV_TO_MEM)?"READ":"WRITE");
+
+ if (dir == DMA_DEV_TO_MEM)
+ rtype = NREAD;
+ else if (dir == DMA_MEM_TO_DEV) {
+ switch (rext->wr_type) {
+ case RDW_ALL_NWRITE:
+ rtype = ALL_NWRITE;
+ break;
+ case RDW_ALL_NWRITE_R:
+ rtype = ALL_NWRITE_R;
+ break;
+ case RDW_LAST_NWRITE_R:
+ default:
+ rtype = LAST_NWRITE_R;
+ break;
+ }
+ } else {
+ tsi_err(&dchan->dev->device,
+ "DMAC%d Unsupported DMA direction option",
+ bdma_chan->id);
+ return ERR_PTR(-EINVAL);
+ }
+
+ spin_lock_bh(&bdma_chan->lock);
+
+ if (!list_empty(&bdma_chan->free_list)) {
+ desc = list_first_entry(&bdma_chan->free_list,
+ struct tsi721_tx_desc, desc_node);
+ list_del_init(&desc->desc_node);
+ desc->destid = rext->destid;
+ desc->rio_addr = rext->rio_addr;
+ desc->rio_addr_u = 0;
+ desc->rtype = rtype;
+ desc->sg_len = sg_len;
+ desc->sg = sgl;
+ txd = &desc->txd;
+ txd->flags = flags;
+ }
+
+ spin_unlock_bh(&bdma_chan->lock);
+
+ if (!txd) {
+ tsi_debug(DMA, &dchan->dev->device,
+ "DMAC%d free TXD is not available", bdma_chan->id);
+ return ERR_PTR(-EBUSY);
+ }
+
+ return txd;
+}
+
+static int tsi721_terminate_all(struct dma_chan *dchan)
+{
+ struct tsi721_bdma_chan *bdma_chan = to_tsi721_chan(dchan);
+ struct tsi721_tx_desc *desc, *_d;
+ LIST_HEAD(list);
+
+ tsi_debug(DMA, &dchan->dev->device, "DMAC%d", bdma_chan->id);
+
+ spin_lock_bh(&bdma_chan->lock);
+
+ bdma_chan->active = false;
+
+ while (!tsi721_dma_is_idle(bdma_chan)) {
+
+ udelay(5);
+#if (0)
+ /* make sure to stop the transfer */
+ iowrite32(TSI721_DMAC_CTL_SUSP,
+ bdma_chan->regs + TSI721_DMAC_CTL);
+
+ /* Wait until DMA channel stops */
+ do {
+ dmac_int = ioread32(bdma_chan->regs + TSI721_DMAC_INT);
+ } while ((dmac_int & TSI721_DMAC_INT_SUSP) == 0);
+#endif
+ }
+
+ if (bdma_chan->active_tx)
+ list_add(&bdma_chan->active_tx->desc_node, &list);
+ list_splice_init(&bdma_chan->queue, &list);
+
+ list_for_each_entry_safe(desc, _d, &list, desc_node)
+ tsi721_dma_tx_err(bdma_chan, desc);
+
+ spin_unlock_bh(&bdma_chan->lock);
+
+ return 0;
+}
+
+static void tsi721_dma_stop(struct tsi721_bdma_chan *bdma_chan)
+{
+ if (!bdma_chan->active)
+ return;
+ spin_lock_bh(&bdma_chan->lock);
+ if (!tsi721_dma_is_idle(bdma_chan)) {
+ int timeout = 100000;
+
+ /* stop the transfer in progress */
+ iowrite32(TSI721_DMAC_CTL_SUSP,
+ bdma_chan->regs + TSI721_DMAC_CTL);
+
+ /* Wait until DMA channel stops */
+ while (!tsi721_dma_is_idle(bdma_chan) && --timeout)
+ udelay(1);
+ }
+
+ spin_unlock_bh(&bdma_chan->lock);
+}
+
+void tsi721_dma_stop_all(struct tsi721_device *priv)
+{
+ int i;
+
+ for (i = 0; i < TSI721_DMA_MAXCH; i++) {
+ if ((i != TSI721_DMACH_MAINT) && (dma_sel & (1 << i)))
+ tsi721_dma_stop(&priv->bdma[i]);
+ }
+}
+
+int tsi721_register_dma(struct tsi721_device *priv)
+{
+ int i;
+ int nr_channels = 0;
+ int err;
+ struct rio_mport *mport = &priv->mport;
+
+ INIT_LIST_HEAD(&mport->dma.channels);
+
+ for (i = 0; i < TSI721_DMA_MAXCH; i++) {
+ struct tsi721_bdma_chan *bdma_chan = &priv->bdma[i];
+
+ if ((i == TSI721_DMACH_MAINT) || (dma_sel & (1 << i)) == 0)
+ continue;
+
+ bdma_chan->regs = priv->regs + TSI721_DMAC_BASE(i);
+
+ bdma_chan->dchan.device = &mport->dma;
+ bdma_chan->dchan.cookie = 1;
+ bdma_chan->dchan.chan_id = i;
+ bdma_chan->id = i;
+ bdma_chan->active = false;
+
+ spin_lock_init(&bdma_chan->lock);
+
+ bdma_chan->active_tx = NULL;
+ INIT_LIST_HEAD(&bdma_chan->queue);
+ INIT_LIST_HEAD(&bdma_chan->free_list);
+
+ tasklet_init(&bdma_chan->tasklet, tsi721_dma_tasklet,
+ (unsigned long)bdma_chan);
+ list_add_tail(&bdma_chan->dchan.device_node,
+ &mport->dma.channels);
+ nr_channels++;
+ }
+
+ mport->dma.chancnt = nr_channels;
+ dma_cap_zero(mport->dma.cap_mask);
+ dma_cap_set(DMA_PRIVATE, mport->dma.cap_mask);
+ dma_cap_set(DMA_SLAVE, mport->dma.cap_mask);
+
+ mport->dma.dev = &priv->pdev->dev;
+ mport->dma.device_alloc_chan_resources = tsi721_alloc_chan_resources;
+ mport->dma.device_free_chan_resources = tsi721_free_chan_resources;
+ mport->dma.device_tx_status = tsi721_tx_status;
+ mport->dma.device_issue_pending = tsi721_issue_pending;
+ mport->dma.device_prep_slave_sg = tsi721_prep_rio_sg;
+ mport->dma.device_terminate_all = tsi721_terminate_all;
+
+ err = dma_async_device_register(&mport->dma);
+ if (err)
+ tsi_err(&priv->pdev->dev, "Failed to register DMA device");
+
+ return err;
+}
+
+void tsi721_unregister_dma(struct tsi721_device *priv)
+{
+ struct rio_mport *mport = &priv->mport;
+ struct dma_chan *chan, *_c;
+ struct tsi721_bdma_chan *bdma_chan;
+
+ tsi721_dma_stop_all(priv);
+ dma_async_device_unregister(&mport->dma);
+
+ list_for_each_entry_safe(chan, _c, &mport->dma.channels,
+ device_node) {
+ bdma_chan = to_tsi721_chan(chan);
+ if (bdma_chan->active) {
+ tsi721_bdma_interrupt_enable(bdma_chan, 0);
+ bdma_chan->active = false;
+ tsi721_sync_dma_irq(bdma_chan);
+ tasklet_kill(&bdma_chan->tasklet);
+ INIT_LIST_HEAD(&bdma_chan->free_list);
+ kfree(bdma_chan->tx_desc);
+ tsi721_bdma_ch_free(bdma_chan);
+ }
+
+ list_del(&chan->device_node);
+ }
+}
diff --git a/drivers/rapidio/rio-access.c b/drivers/rapidio/rio-access.c
new file mode 100644
index 000000000..f9e10647f
--- /dev/null
+++ b/drivers/rapidio/rio-access.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO configuration space access support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ */
+
+#include <linux/rio.h>
+#include <linux/module.h>
+
+#include <linux/rio_drv.h>
+
+/*
+ * Wrappers for all RIO configuration access functions. They just check
+ * alignment and call the low-level functions pointed to by rio_mport->ops.
+ */
+
+#define RIO_8_BAD 0
+#define RIO_16_BAD (offset & 1)
+#define RIO_32_BAD (offset & 3)
+
+/**
+ * RIO_LOP_READ - Generate rio_local_read_config_* functions
+ * @size: Size of configuration space read (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space read (1, 2, 4 bytes)
+ *
+ * Generates rio_local_read_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_LOP_READ(size,type,len) \
+int __rio_local_read_config_##size \
+ (struct rio_mport *mport, u32 offset, type *value) \
+{ \
+ int res; \
+ u32 data = 0; \
+ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
+ res = mport->ops->lcread(mport, mport->id, offset, len, &data); \
+ *value = (type)data; \
+ return res; \
+}
+
+/**
+ * RIO_LOP_WRITE - Generate rio_local_write_config_* functions
+ * @size: Size of configuration space write (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space write (1, 2, 4 bytes)
+ *
+ * Generates rio_local_write_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_LOP_WRITE(size,type,len) \
+int __rio_local_write_config_##size \
+ (struct rio_mport *mport, u32 offset, type value) \
+{ \
+ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
+ return mport->ops->lcwrite(mport, mport->id, offset, len, value);\
+}
+
+RIO_LOP_READ(8, u8, 1)
+RIO_LOP_READ(16, u16, 2)
+RIO_LOP_READ(32, u32, 4)
+RIO_LOP_WRITE(8, u8, 1)
+RIO_LOP_WRITE(16, u16, 2)
+RIO_LOP_WRITE(32, u32, 4)
+
+EXPORT_SYMBOL_GPL(__rio_local_read_config_8);
+EXPORT_SYMBOL_GPL(__rio_local_read_config_16);
+EXPORT_SYMBOL_GPL(__rio_local_read_config_32);
+EXPORT_SYMBOL_GPL(__rio_local_write_config_8);
+EXPORT_SYMBOL_GPL(__rio_local_write_config_16);
+EXPORT_SYMBOL_GPL(__rio_local_write_config_32);
+
+/**
+ * RIO_OP_READ - Generate rio_mport_read_config_* functions
+ * @size: Size of configuration space read (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space read (1, 2, 4 bytes)
+ *
+ * Generates rio_mport_read_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_OP_READ(size,type,len) \
+int rio_mport_read_config_##size \
+ (struct rio_mport *mport, u16 destid, u8 hopcount, u32 offset, type *value) \
+{ \
+ int res; \
+ u32 data = 0; \
+ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
+ res = mport->ops->cread(mport, mport->id, destid, hopcount, offset, len, &data); \
+ *value = (type)data; \
+ return res; \
+}
+
+/**
+ * RIO_OP_WRITE - Generate rio_mport_write_config_* functions
+ * @size: Size of configuration space write (8, 16, 32 bits)
+ * @type: C type of value argument
+ * @len: Length of configuration space write (1, 2, 4 bytes)
+ *
+ * Generates rio_mport_write_config_* functions used to access
+ * configuration space registers on the local device.
+ */
+#define RIO_OP_WRITE(size,type,len) \
+int rio_mport_write_config_##size \
+ (struct rio_mport *mport, u16 destid, u8 hopcount, u32 offset, type value) \
+{ \
+ if (RIO_##size##_BAD) return RIO_BAD_SIZE; \
+ return mport->ops->cwrite(mport, mport->id, destid, hopcount, \
+ offset, len, value); \
+}
+
+RIO_OP_READ(8, u8, 1)
+RIO_OP_READ(16, u16, 2)
+RIO_OP_READ(32, u32, 4)
+RIO_OP_WRITE(8, u8, 1)
+RIO_OP_WRITE(16, u16, 2)
+RIO_OP_WRITE(32, u32, 4)
+
+EXPORT_SYMBOL_GPL(rio_mport_read_config_8);
+EXPORT_SYMBOL_GPL(rio_mport_read_config_16);
+EXPORT_SYMBOL_GPL(rio_mport_read_config_32);
+EXPORT_SYMBOL_GPL(rio_mport_write_config_8);
+EXPORT_SYMBOL_GPL(rio_mport_write_config_16);
+EXPORT_SYMBOL_GPL(rio_mport_write_config_32);
+
+/**
+ * rio_mport_send_doorbell - Send a doorbell message
+ *
+ * @mport: RIO master port
+ * @destid: RIO device destination ID
+ * @data: Doorbell message data
+ *
+ * Send a doorbell message to a RIO device. The doorbell message
+ * has a 16-bit info field provided by the data argument.
+ */
+int rio_mport_send_doorbell(struct rio_mport *mport, u16 destid, u16 data)
+{
+ return mport->ops->dsend(mport, mport->id, destid, data);
+}
+
+EXPORT_SYMBOL_GPL(rio_mport_send_doorbell);
diff --git a/drivers/rapidio/rio-driver.c b/drivers/rapidio/rio-driver.c
new file mode 100644
index 000000000..a72bb0a40
--- /dev/null
+++ b/drivers/rapidio/rio-driver.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO driver support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_drv.h>
+
+#include "rio.h"
+
+/**
+ * rio_match_device - Tell if a RIO device has a matching RIO device id structure
+ * @id: the RIO device id structure to match against
+ * @rdev: the RIO device structure to match against
+ *
+ * Used from driver probe and bus matching to check whether a RIO device
+ * matches a device id structure provided by a RIO driver. Returns the
+ * matching &struct rio_device_id or %NULL if there is no match.
+ */
+static const struct rio_device_id *rio_match_device(const struct rio_device_id
+ *id,
+ const struct rio_dev *rdev)
+{
+ while (id->vid || id->asm_vid) {
+ if (((id->vid == RIO_ANY_ID) || (id->vid == rdev->vid)) &&
+ ((id->did == RIO_ANY_ID) || (id->did == rdev->did)) &&
+ ((id->asm_vid == RIO_ANY_ID)
+ || (id->asm_vid == rdev->asm_vid))
+ && ((id->asm_did == RIO_ANY_ID)
+ || (id->asm_did == rdev->asm_did)))
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+/**
+ * rio_dev_get - Increments the reference count of the RIO device structure
+ *
+ * @rdev: RIO device being referenced
+ *
+ * Each live reference to a device should be refcounted.
+ *
+ * Drivers for RIO devices should normally record such references in
+ * their probe() methods, when they bind to a device, and release
+ * them by calling rio_dev_put(), in their disconnect() methods.
+ */
+struct rio_dev *rio_dev_get(struct rio_dev *rdev)
+{
+ if (rdev)
+ get_device(&rdev->dev);
+
+ return rdev;
+}
+
+/**
+ * rio_dev_put - Release a use of the RIO device structure
+ *
+ * @rdev: RIO device being disconnected
+ *
+ * Must be called when a user of a device is finished with it.
+ * When the last user of the device calls this function, the
+ * memory of the device is freed.
+ */
+void rio_dev_put(struct rio_dev *rdev)
+{
+ if (rdev)
+ put_device(&rdev->dev);
+}
+
+/**
+ * rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure
+ * @dev: the RIO device structure to match against
+ *
+ * return 0 and set rio_dev->driver when drv claims rio_dev, else error
+ */
+static int rio_device_probe(struct device *dev)
+{
+ struct rio_driver *rdrv = to_rio_driver(dev->driver);
+ struct rio_dev *rdev = to_rio_dev(dev);
+ int error = -ENODEV;
+ const struct rio_device_id *id;
+
+ if (!rdev->driver && rdrv->probe) {
+ if (!rdrv->id_table)
+ return error;
+ id = rio_match_device(rdrv->id_table, rdev);
+ rio_dev_get(rdev);
+ if (id)
+ error = rdrv->probe(rdev, id);
+ if (error >= 0) {
+ rdev->driver = rdrv;
+ error = 0;
+ } else
+ rio_dev_put(rdev);
+ }
+ return error;
+}
+
+/**
+ * rio_device_remove - Remove a RIO device from the system
+ *
+ * @dev: the RIO device structure to match against
+ *
+ * Remove a RIO device from the system. If it has an associated
+ * driver, then run the driver remove() method. Then update
+ * the reference count.
+ */
+static void rio_device_remove(struct device *dev)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ struct rio_driver *rdrv = rdev->driver;
+
+ if (rdrv) {
+ if (rdrv->remove)
+ rdrv->remove(rdev);
+ rdev->driver = NULL;
+ }
+
+ rio_dev_put(rdev);
+}
+
+static void rio_device_shutdown(struct device *dev)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ struct rio_driver *rdrv = rdev->driver;
+
+ dev_dbg(dev, "RIO: %s\n", __func__);
+
+ if (rdrv && rdrv->shutdown)
+ rdrv->shutdown(rdev);
+}
+
+/**
+ * rio_register_driver - register a new RIO driver
+ * @rdrv: the RIO driver structure to register
+ *
+ * Adds a &struct rio_driver to the list of registered drivers.
+ * Returns a negative value on error, otherwise 0. If no error
+ * occurred, the driver remains registered even if no device
+ * was claimed during registration.
+ */
+int rio_register_driver(struct rio_driver *rdrv)
+{
+ /* initialize common driver fields */
+ rdrv->driver.name = rdrv->name;
+ rdrv->driver.bus = &rio_bus_type;
+
+ /* register with core */
+ return driver_register(&rdrv->driver);
+}
+
+/**
+ * rio_unregister_driver - unregister a RIO driver
+ * @rdrv: the RIO driver structure to unregister
+ *
+ * Deletes the &struct rio_driver from the list of registered RIO
+ * drivers, gives it a chance to clean up by calling its remove()
+ * function for each device it was responsible for, and marks those
+ * devices as driverless.
+ */
+void rio_unregister_driver(struct rio_driver *rdrv)
+{
+ driver_unregister(&rdrv->driver);
+}
+
+void rio_attach_device(struct rio_dev *rdev)
+{
+ rdev->dev.bus = &rio_bus_type;
+}
+EXPORT_SYMBOL_GPL(rio_attach_device);
+
+/**
+ * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
+ * @dev: the standard device structure to match against
+ * @drv: the standard driver structure containing the ids to match against
+ *
+ * Used by a driver to check whether a RIO device present in the
+ * system is in its list of supported devices. Returns 1 if
+ * there is a matching &struct rio_device_id or 0 if there is
+ * no match.
+ */
+static int rio_match_bus(struct device *dev, struct device_driver *drv)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ struct rio_driver *rdrv = to_rio_driver(drv);
+ const struct rio_device_id *id = rdrv->id_table;
+ const struct rio_device_id *found_id;
+
+ if (!id)
+ goto out;
+
+ found_id = rio_match_device(id, rdev);
+
+ if (found_id)
+ return 1;
+
+ out:return 0;
+}
+
+static int rio_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct rio_dev *rdev;
+
+ if (!dev)
+ return -ENODEV;
+
+ rdev = to_rio_dev(dev);
+ if (!rdev)
+ return -ENODEV;
+
+ if (add_uevent_var(env, "MODALIAS=rapidio:v%04Xd%04Xav%04Xad%04X",
+ rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did))
+ return -ENOMEM;
+ return 0;
+}
+
+struct class rio_mport_class = {
+ .name = "rapidio_port",
+ .owner = THIS_MODULE,
+ .dev_groups = rio_mport_groups,
+};
+EXPORT_SYMBOL_GPL(rio_mport_class);
+
+struct bus_type rio_bus_type = {
+ .name = "rapidio",
+ .match = rio_match_bus,
+ .dev_groups = rio_dev_groups,
+ .bus_groups = rio_bus_groups,
+ .probe = rio_device_probe,
+ .remove = rio_device_remove,
+ .shutdown = rio_device_shutdown,
+ .uevent = rio_uevent,
+};
+
+/**
+ * rio_bus_init - Register the RapidIO bus with the device model
+ *
+ * Registers the RIO mport device class and RIO bus type with the Linux
+ * device model.
+ */
+static int __init rio_bus_init(void)
+{
+ int ret;
+
+ ret = class_register(&rio_mport_class);
+ if (!ret) {
+ ret = bus_register(&rio_bus_type);
+ if (ret)
+ class_unregister(&rio_mport_class);
+ }
+ return ret;
+}
+
+postcore_initcall(rio_bus_init);
+
+EXPORT_SYMBOL_GPL(rio_register_driver);
+EXPORT_SYMBOL_GPL(rio_unregister_driver);
+EXPORT_SYMBOL_GPL(rio_bus_type);
+EXPORT_SYMBOL_GPL(rio_dev_get);
+EXPORT_SYMBOL_GPL(rio_dev_put);
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
new file mode 100644
index 000000000..fdcf742b2
--- /dev/null
+++ b/drivers/rapidio/rio-scan.c
@@ -0,0 +1,1156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO enumeration and discovery support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ * - Added Port-Write/Error Management initialization and handling
+ *
+ * Copyright 2009 Sysgo AG
+ * Thomas Moll <thomas.moll@sysgo.com>
+ * - Added Input- Output- enable functionality, to allow full communication
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <linux/sched.h>
+#include <linux/jiffies.h>
+#include <linux/slab.h>
+
+#include "rio.h"
+
+static void rio_init_em(struct rio_dev *rdev);
+
+struct rio_id_table {
+ u16 start; /* logical minimal id */
+ u32 max; /* max number of IDs in table */
+ spinlock_t lock;
+ unsigned long table[];
+};
+
+static int next_destid = 0;
+static int next_comptag = 1;
+
+/**
+ * rio_destid_alloc - Allocate next available destID for given network
+ * @net: RIO network
+ *
+ * Returns next available device destination ID for the specified RIO network.
+ * Marks allocated ID as one in use.
+ * Returns RIO_INVALID_DESTID if new destID is not available.
+ */
+static u16 rio_destid_alloc(struct rio_net *net)
+{
+ int destid;
+ struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
+
+ spin_lock(&idtab->lock);
+ destid = find_first_zero_bit(idtab->table, idtab->max);
+
+ if (destid < idtab->max) {
+ set_bit(destid, idtab->table);
+ destid += idtab->start;
+ } else
+ destid = RIO_INVALID_DESTID;
+
+ spin_unlock(&idtab->lock);
+ return (u16)destid;
+}
+
+/**
+ * rio_destid_reserve - Reserve the specified destID
+ * @net: RIO network
+ * @destid: destID to reserve
+ *
+ * Tries to reserve the specified destID.
+ * Returns 0 if successful.
+ */
+static int rio_destid_reserve(struct rio_net *net, u16 destid)
+{
+ int oldbit;
+ struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
+
+ destid -= idtab->start;
+ spin_lock(&idtab->lock);
+ oldbit = test_and_set_bit(destid, idtab->table);
+ spin_unlock(&idtab->lock);
+ return oldbit;
+}
+
+/**
+ * rio_destid_free - free a previously allocated destID
+ * @net: RIO network
+ * @destid: destID to free
+ *
+ * Makes the specified destID available for use.
+ */
+static void rio_destid_free(struct rio_net *net, u16 destid)
+{
+ struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
+
+ destid -= idtab->start;
+ spin_lock(&idtab->lock);
+ clear_bit(destid, idtab->table);
+ spin_unlock(&idtab->lock);
+}
+
+/**
+ * rio_destid_first - return first destID in use
+ * @net: RIO network
+ */
+static u16 rio_destid_first(struct rio_net *net)
+{
+ int destid;
+ struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
+
+ spin_lock(&idtab->lock);
+ destid = find_first_bit(idtab->table, idtab->max);
+ if (destid >= idtab->max)
+ destid = RIO_INVALID_DESTID;
+ else
+ destid += idtab->start;
+ spin_unlock(&idtab->lock);
+ return (u16)destid;
+}
+
+/**
+ * rio_destid_next - return next destID in use
+ * @net: RIO network
+ * @from: destination ID from which search shall continue
+ */
+static u16 rio_destid_next(struct rio_net *net, u16 from)
+{
+ int destid;
+ struct rio_id_table *idtab = (struct rio_id_table *)net->enum_data;
+
+ spin_lock(&idtab->lock);
+ destid = find_next_bit(idtab->table, idtab->max, from);
+ if (destid >= idtab->max)
+ destid = RIO_INVALID_DESTID;
+ else
+ destid += idtab->start;
+ spin_unlock(&idtab->lock);
+ return (u16)destid;
+}
+
+/**
+ * rio_get_device_id - Get the base/extended device id for a device
+ * @port: RIO master port
+ * @destid: Destination ID of device
+ * @hopcount: Hopcount to device
+ *
+ * Reads the base/extended device id from a device. Returns the
+ * 8/16-bit device ID.
+ */
+static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+ u32 result;
+
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
+
+ return RIO_GET_DID(port->sys_size, result);
+}
+
+/**
+ * rio_set_device_id - Set the base/extended device id for a device
+ * @port: RIO master port
+ * @destid: Destination ID of device
+ * @hopcount: Hopcount to device
+ * @did: Device ID value to be written
+ *
+ * Writes the base/extended device id from a device.
+ */
+static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
+{
+ rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
+ RIO_SET_DID(port->sys_size, did));
+}
+
+/**
+ * rio_clear_locks- Release all host locks and signal enumeration complete
+ * @net: RIO network to run on
+ *
+ * Marks the component tag CSR on each device with the enumeration
+ * complete flag. When complete, it then release the host locks on
+ * each device. Returns 0 on success or %-EINVAL on failure.
+ */
+static int rio_clear_locks(struct rio_net *net)
+{
+ struct rio_mport *port = net->hport;
+ struct rio_dev *rdev;
+ u32 result;
+ int ret = 0;
+
+ /* Release host device id locks */
+ rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ printk(KERN_INFO
+ "RIO: badness when releasing host lock on master port, result %8.8x\n",
+ result);
+ ret = -EINVAL;
+ }
+ list_for_each_entry(rdev, &net->devices, net_list) {
+ rio_write_config_32(rdev, RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_read_config_32(rdev, RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ printk(KERN_INFO
+ "RIO: badness when releasing host lock on vid %4.4x did %4.4x\n",
+ rdev->vid, rdev->did);
+ ret = -EINVAL;
+ }
+
+ /* Mark device as discovered and enable master */
+ rio_read_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ &result);
+ result |= RIO_PORT_GEN_DISCOVERED | RIO_PORT_GEN_MASTER;
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ result);
+ }
+
+ return ret;
+}
+
+/**
+ * rio_enum_host- Set host lock and initialize host destination ID
+ * @port: Master port to issue transaction
+ *
+ * Sets the local host master port lock and destination ID register
+ * with the host device ID value. The host device ID value is provided
+ * by the platform. Returns %0 on success or %-1 on failure.
+ */
+static int rio_enum_host(struct rio_mport *port)
+{
+ u32 result;
+
+ /* Set master port host device id lock */
+ rio_local_write_config_32(port, RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+
+ rio_local_read_config_32(port, RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != port->host_deviceid)
+ return -1;
+
+ /* Set master port destid and init destid ctr */
+ rio_local_set_device_id(port, port->host_deviceid);
+ return 0;
+}
+
+/**
+ * rio_device_has_destid- Test if a device contains a destination ID register
+ * @port: Master port to issue transaction
+ * @src_ops: RIO device source operations
+ * @dst_ops: RIO device destination operations
+ *
+ * Checks the provided @src_ops and @dst_ops for the necessary transaction
+ * capabilities that indicate whether or not a device will implement a
+ * destination ID register. Returns 1 if true or 0 if false.
+ */
+static int rio_device_has_destid(struct rio_mport *port, int src_ops,
+ int dst_ops)
+{
+ u32 mask = RIO_OPS_READ | RIO_OPS_WRITE | RIO_OPS_ATOMIC_TST_SWP | RIO_OPS_ATOMIC_INC | RIO_OPS_ATOMIC_DEC | RIO_OPS_ATOMIC_SET | RIO_OPS_ATOMIC_CLR;
+
+ return !!((src_ops | dst_ops) & mask);
+}
+
+/**
+ * rio_release_dev- Frees a RIO device struct
+ * @dev: LDM device associated with a RIO device struct
+ *
+ * Gets the RIO device struct associated a RIO device struct.
+ * The RIO device struct is freed.
+ */
+static void rio_release_dev(struct device *dev)
+{
+ struct rio_dev *rdev;
+
+ rdev = to_rio_dev(dev);
+ kfree(rdev);
+}
+
+/**
+ * rio_is_switch- Tests if a RIO device has switch capabilities
+ * @rdev: RIO device
+ *
+ * Gets the RIO device Processing Element Features register
+ * contents and tests for switch capabilities. Returns 1 if
+ * the device is a switch or 0 if it is not a switch.
+ * The RIO device struct is freed.
+ */
+static int rio_is_switch(struct rio_dev *rdev)
+{
+ if (rdev->pef & RIO_PEF_SWITCH)
+ return 1;
+ return 0;
+}
+
+/**
+ * rio_setup_device- Allocates and sets up a RIO device
+ * @net: RIO network
+ * @port: Master port to send transactions
+ * @destid: Current destination ID
+ * @hopcount: Current hopcount
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Allocates a RIO device and configures fields based on configuration
+ * space contents. If device has a destination ID register, a destination
+ * ID is either assigned in enumeration mode or read from configuration
+ * space in discovery mode. If the device has switch capabilities, then
+ * a switch is allocated and configured appropriately. Returns a pointer
+ * to a RIO device on success or NULL on failure.
+ *
+ */
+static struct rio_dev *rio_setup_device(struct rio_net *net,
+ struct rio_mport *port, u16 destid,
+ u8 hopcount, int do_enum)
+{
+ int ret = 0;
+ struct rio_dev *rdev;
+ struct rio_switch *rswitch = NULL;
+ int result, rdid;
+ size_t size;
+ u32 swpinfo = 0;
+
+ size = sizeof(*rdev);
+ if (rio_mport_read_config_32(port, destid, hopcount,
+ RIO_PEF_CAR, &result))
+ return NULL;
+
+ if (result & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_SWP_INFO_CAR, &swpinfo);
+ if (result & RIO_PEF_SWITCH)
+ size += struct_size(rswitch, nextdev, RIO_GET_TOTAL_PORTS(swpinfo));
+ }
+
+ rdev = kzalloc(size, GFP_KERNEL);
+ if (!rdev)
+ return NULL;
+
+ rdev->net = net;
+ rdev->pef = result;
+ rdev->swpinfo = swpinfo;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_ID_CAR,
+ &result);
+ rdev->did = result >> 16;
+ rdev->vid = result & 0xffff;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DEV_INFO_CAR,
+ &rdev->device_rev);
+ rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_ID_CAR,
+ &result);
+ rdev->asm_did = result >> 16;
+ rdev->asm_vid = result & 0xffff;
+ rio_mport_read_config_32(port, destid, hopcount, RIO_ASM_INFO_CAR,
+ &result);
+ rdev->asm_rev = result >> 16;
+ if (rdev->pef & RIO_PEF_EXT_FEATURES) {
+ rdev->efptr = result & 0xffff;
+ rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
+ hopcount, &rdev->phys_rmap);
+ pr_debug("RIO: %s Register Map %d device\n",
+ __func__, rdev->phys_rmap);
+
+ rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT);
+ if (!rdev->em_efptr)
+ rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT_HS);
+ }
+
+ rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
+ &rdev->src_ops);
+ rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
+ &rdev->dst_ops);
+
+ if (do_enum) {
+ /* Assign component tag to device */
+ if (next_comptag >= 0x10000) {
+ pr_err("RIO: Component Tag Counter Overflow\n");
+ goto cleanup;
+ }
+ rio_mport_write_config_32(port, destid, hopcount,
+ RIO_COMPONENT_TAG_CSR, next_comptag);
+ rdev->comp_tag = next_comptag++;
+ rdev->do_enum = true;
+ } else {
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_COMPONENT_TAG_CSR,
+ &rdev->comp_tag);
+ }
+
+ if (rio_device_has_destid(port, rdev->src_ops, rdev->dst_ops)) {
+ if (do_enum) {
+ rio_set_device_id(port, destid, hopcount, next_destid);
+ rdev->destid = next_destid;
+ next_destid = rio_destid_alloc(net);
+ } else
+ rdev->destid = rio_get_device_id(port, destid, hopcount);
+
+ rdev->hopcount = 0xff;
+ } else {
+ /* Switch device has an associated destID which
+ * will be adjusted later
+ */
+ rdev->destid = destid;
+ rdev->hopcount = hopcount;
+ }
+
+ /* If a PE has both switch and other functions, show it as a switch */
+ if (rio_is_switch(rdev)) {
+ rswitch = rdev->rswitch;
+ rswitch->port_ok = 0;
+ spin_lock_init(&rswitch->lock);
+ rswitch->route_table =
+ kzalloc(RIO_MAX_ROUTE_ENTRIES(port->sys_size),
+ GFP_KERNEL);
+ if (!rswitch->route_table)
+ goto cleanup;
+ /* Initialize switch route table */
+ for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
+ rdid++)
+ rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
+ dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
+ rdev->comp_tag & RIO_CTAG_UDEVID);
+
+ if (do_enum)
+ rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
+ } else {
+ if (do_enum)
+ /*Enable Input Output Port (transmitter receiver)*/
+ rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);
+
+ dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
+ rdev->comp_tag & RIO_CTAG_UDEVID);
+ }
+
+ rdev->dev.parent = &net->dev;
+ rio_attach_device(rdev);
+ rdev->dev.release = rio_release_dev;
+ rdev->dma_mask = DMA_BIT_MASK(32);
+ rdev->dev.dma_mask = &rdev->dma_mask;
+ rdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ if (rdev->dst_ops & RIO_DST_OPS_DOORBELL)
+ rio_init_dbell_res(&rdev->riores[RIO_DOORBELL_RESOURCE],
+ 0, 0xffff);
+
+ ret = rio_add_device(rdev);
+ if (ret) {
+ if (rswitch)
+ kfree(rswitch->route_table);
+ put_device(&rdev->dev);
+ return NULL;
+ }
+
+ rio_dev_get(rdev);
+
+ return rdev;
+
+cleanup:
+ if (rswitch)
+ kfree(rswitch->route_table);
+
+ kfree(rdev);
+ return NULL;
+}
+
+/**
+ * rio_sport_is_active- Tests if a switch port has an active connection.
+ * @rdev: RapidIO device object
+ * @sp: Switch port number
+ *
+ * Reads the port error status CSR for a particular switch port to
+ * determine if the port has an active link. Returns
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the port is active or %0 if it is
+ * inactive.
+ */
+static int
+rio_sport_is_active(struct rio_dev *rdev, int sp)
+{
+ u32 result = 0;
+
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp),
+ &result);
+
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
+}
+
+/**
+ * rio_get_host_deviceid_lock- Reads the Host Device ID Lock CSR on a device
+ * @port: Master port to send transaction
+ * @hopcount: Number of hops to the device
+ *
+ * Used during enumeration to read the Host Device ID Lock CSR on a
+ * RIO device. Returns the value of the lock register.
+ */
+static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
+{
+ u32 result;
+
+ rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+
+ return (u16) (result & 0xffff);
+}
+
+/**
+ * rio_enum_peer- Recursively enumerate a RIO network through a master port
+ * @net: RIO network being enumerated
+ * @port: Master port to send transactions
+ * @hopcount: Number of hops into the network
+ * @prev: Previous RIO device connected to the enumerated one
+ * @prev_port: Port on previous RIO device
+ *
+ * Recursively enumerates a RIO network. Transactions are sent via the
+ * master port passed in @port.
+ */
+static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
+ u8 hopcount, struct rio_dev *prev, int prev_port)
+{
+ struct rio_dev *rdev;
+ u32 regval;
+ int tmp;
+
+ if (rio_mport_chk_dev_access(port,
+ RIO_ANY_DESTID(port->sys_size), hopcount)) {
+ pr_debug("RIO: device access check failed\n");
+ return -1;
+ }
+
+ if (rio_get_host_deviceid_lock(port, hopcount) == port->host_deviceid) {
+ pr_debug("RIO: PE already discovered by this host\n");
+ /*
+ * Already discovered by this host. Add it as another
+ * link to the existing device.
+ */
+ rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount, RIO_COMPONENT_TAG_CSR, &regval);
+
+ if (regval) {
+ rdev = rio_get_comptag((regval & 0xffff), NULL);
+
+ if (rdev && prev && rio_is_switch(prev)) {
+ pr_debug("RIO: redundant path to %s\n",
+ rio_name(rdev));
+ prev->rswitch->nextdev[prev_port] = rdev;
+ }
+ }
+
+ return 0;
+ }
+
+ /* Attempt to acquire device lock */
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+ while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
+ < port->host_deviceid) {
+ /* Delay a bit */
+ mdelay(1);
+ /* Attempt to acquire device lock again */
+ rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ }
+
+ if (rio_get_host_deviceid_lock(port, hopcount) > port->host_deviceid) {
+ pr_debug(
+ "RIO: PE locked by a higher priority host...retreating\n");
+ return -1;
+ }
+
+ /* Setup new RIO device */
+ rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
+ hopcount, 1);
+ if (rdev) {
+ rdev->prev = prev;
+ if (prev && rio_is_switch(prev))
+ prev->rswitch->nextdev[prev_port] = rdev;
+ } else
+ return -1;
+
+ if (rio_is_switch(rdev)) {
+ int sw_destid;
+ int cur_destid;
+ int sw_inport;
+ u16 destid;
+ int port_num;
+
+ sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
+ rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
+ port->host_deviceid, sw_inport, 0);
+ rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
+
+ destid = rio_destid_first(net);
+ while (destid != RIO_INVALID_DESTID && destid < next_destid) {
+ if (destid != port->host_deviceid) {
+ rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
+ destid, sw_inport, 0);
+ rdev->rswitch->route_table[destid] = sw_inport;
+ }
+ destid = rio_destid_next(net, destid + 1);
+ }
+ pr_debug(
+ "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
+ rio_name(rdev), rdev->vid, rdev->did,
+ RIO_GET_TOTAL_PORTS(rdev->swpinfo));
+ sw_destid = next_destid;
+ for (port_num = 0;
+ port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+ port_num++) {
+ if (sw_inport == port_num) {
+ rio_enable_rx_tx_port(port, 0,
+ RIO_ANY_DESTID(port->sys_size),
+ hopcount, port_num);
+ rdev->rswitch->port_ok |= (1 << port_num);
+ continue;
+ }
+
+ cur_destid = next_destid;
+
+ if (rio_sport_is_active(rdev, port_num)) {
+ pr_debug(
+ "RIO: scanning device on port %d\n",
+ port_num);
+ rio_enable_rx_tx_port(port, 0,
+ RIO_ANY_DESTID(port->sys_size),
+ hopcount, port_num);
+ rdev->rswitch->port_ok |= (1 << port_num);
+ rio_route_add_entry(rdev, RIO_GLOBAL_TABLE,
+ RIO_ANY_DESTID(port->sys_size),
+ port_num, 0);
+
+ if (rio_enum_peer(net, port, hopcount + 1,
+ rdev, port_num) < 0)
+ return -1;
+
+ /* Update routing tables */
+ destid = rio_destid_next(net, cur_destid + 1);
+ if (destid != RIO_INVALID_DESTID) {
+ for (destid = cur_destid;
+ destid < next_destid;) {
+ if (destid != port->host_deviceid) {
+ rio_route_add_entry(rdev,
+ RIO_GLOBAL_TABLE,
+ destid,
+ port_num,
+ 0);
+ rdev->rswitch->
+ route_table[destid] =
+ port_num;
+ }
+ destid = rio_destid_next(net,
+ destid + 1);
+ }
+ }
+ } else {
+ /* If switch supports Error Management,
+ * set PORT_LOCKOUT bit for unused port
+ */
+ if (rdev->em_efptr)
+ rio_set_port_lockout(rdev, port_num, 1);
+
+ rdev->rswitch->port_ok &= ~(1 << port_num);
+ }
+ }
+
+ /* Direct Port-write messages to the enumeratiing host */
+ if ((rdev->src_ops & RIO_SRC_OPS_PORT_WRITE) &&
+ (rdev->em_efptr)) {
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PW_TGT_DEVID,
+ (port->host_deviceid << 16) |
+ (port->sys_size << 15));
+ }
+
+ rio_init_em(rdev);
+
+ /* Check for empty switch */
+ if (next_destid == sw_destid)
+ next_destid = rio_destid_alloc(net);
+
+ rdev->destid = sw_destid;
+ } else
+ pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
+ rio_name(rdev), rdev->vid, rdev->did);
+
+ return 0;
+}
+
+/**
+ * rio_enum_complete- Tests if enumeration of a network is complete
+ * @port: Master port to send transaction
+ *
+ * Tests the PGCCSR discovered bit for non-zero value (enumeration
+ * complete flag). Return %1 if enumeration is complete or %0 if
+ * enumeration is incomplete.
+ */
+static int rio_enum_complete(struct rio_mport *port)
+{
+ u32 regval;
+
+ rio_local_read_config_32(port, port->phys_efptr + RIO_PORT_GEN_CTL_CSR,
+ &regval);
+ return (regval & RIO_PORT_GEN_DISCOVERED) ? 1 : 0;
+}
+
+/**
+ * rio_disc_peer- Recursively discovers a RIO network through a master port
+ * @net: RIO network being discovered
+ * @port: Master port to send transactions
+ * @destid: Current destination ID in network
+ * @hopcount: Number of hops into the network
+ * @prev: previous rio_dev
+ * @prev_port: previous port number
+ *
+ * Recursively discovers a RIO network. Transactions are sent via the
+ * master port passed in @port.
+ */
+static int
+rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
+ u8 hopcount, struct rio_dev *prev, int prev_port)
+{
+ u8 port_num, route_port;
+ struct rio_dev *rdev;
+ u16 ndestid;
+
+ /* Setup new RIO device */
+ if ((rdev = rio_setup_device(net, port, destid, hopcount, 0))) {
+ rdev->prev = prev;
+ if (prev && rio_is_switch(prev))
+ prev->rswitch->nextdev[prev_port] = rdev;
+ } else
+ return -1;
+
+ if (rio_is_switch(rdev)) {
+ /* Associated destid is how we accessed this switch */
+ rdev->destid = destid;
+
+ pr_debug(
+ "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
+ rio_name(rdev), rdev->vid, rdev->did,
+ RIO_GET_TOTAL_PORTS(rdev->swpinfo));
+ for (port_num = 0;
+ port_num < RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+ port_num++) {
+ if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
+ continue;
+
+ if (rio_sport_is_active(rdev, port_num)) {
+ pr_debug(
+ "RIO: scanning device on port %d\n",
+ port_num);
+
+ rio_lock_device(port, destid, hopcount, 1000);
+
+ for (ndestid = 0;
+ ndestid < RIO_ANY_DESTID(port->sys_size);
+ ndestid++) {
+ rio_route_get_entry(rdev,
+ RIO_GLOBAL_TABLE,
+ ndestid,
+ &route_port, 0);
+ if (route_port == port_num)
+ break;
+ }
+
+ if (ndestid == RIO_ANY_DESTID(port->sys_size))
+ continue;
+ rio_unlock_device(port, destid, hopcount);
+ if (rio_disc_peer(net, port, ndestid,
+ hopcount + 1, rdev, port_num) < 0)
+ return -1;
+ }
+ }
+ } else
+ pr_debug("RIO: found %s (vid %4.4x did %4.4x)\n",
+ rio_name(rdev), rdev->vid, rdev->did);
+
+ return 0;
+}
+
+/**
+ * rio_mport_is_active- Tests if master port link is active
+ * @port: Master port to test
+ *
+ * Reads the port error status CSR for the master port to
+ * determine if the port has an active link. Returns
+ * %RIO_PORT_N_ERR_STS_PORT_OK if the master port is active
+ * or %0 if it is inactive.
+ */
+static int rio_mport_is_active(struct rio_mport *port)
+{
+ u32 result = 0;
+
+ rio_local_read_config_32(port,
+ port->phys_efptr +
+ RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap),
+ &result);
+ return result & RIO_PORT_N_ERR_STS_PORT_OK;
+}
+
+static void rio_scan_release_net(struct rio_net *net)
+{
+ pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);
+ kfree(net->enum_data);
+}
+
+static void rio_scan_release_dev(struct device *dev)
+{
+ struct rio_net *net;
+
+ net = to_rio_net(dev);
+ pr_debug("RIO-SCAN: %s: net_%d\n", __func__, net->id);
+ kfree(net);
+}
+
+/*
+ * rio_scan_alloc_net - Allocate and configure a new RIO network
+ * @mport: Master port associated with the RIO network
+ * @do_enum: Enumeration/Discovery mode flag
+ * @start: logical minimal start id for new net
+ *
+ * Allocates a new RIO network structure and initializes enumerator-specific
+ * part of it (if required).
+ * Returns a RIO network pointer on success or %NULL on failure.
+ */
+static struct rio_net *rio_scan_alloc_net(struct rio_mport *mport,
+ int do_enum, u16 start)
+{
+ struct rio_net *net;
+
+ net = rio_alloc_net(mport);
+
+ if (net && do_enum) {
+ struct rio_id_table *idtab;
+ size_t size;
+
+ size = sizeof(struct rio_id_table) +
+ BITS_TO_LONGS(
+ RIO_MAX_ROUTE_ENTRIES(mport->sys_size)
+ ) * sizeof(long);
+
+ idtab = kzalloc(size, GFP_KERNEL);
+
+ if (idtab == NULL) {
+ pr_err("RIO: failed to allocate destID table\n");
+ rio_free_net(net);
+ net = NULL;
+ } else {
+ net->enum_data = idtab;
+ net->release = rio_scan_release_net;
+ idtab->start = start;
+ idtab->max = RIO_MAX_ROUTE_ENTRIES(mport->sys_size);
+ spin_lock_init(&idtab->lock);
+ }
+ }
+
+ if (net) {
+ net->id = mport->id;
+ net->hport = mport;
+ dev_set_name(&net->dev, "rnet_%d", net->id);
+ net->dev.parent = &mport->dev;
+ net->dev.release = rio_scan_release_dev;
+ rio_add_net(net);
+ }
+
+ return net;
+}
+
+/**
+ * rio_update_route_tables- Updates route tables in switches
+ * @net: RIO network to run update on
+ *
+ * For each enumerated device, ensure that each switch in a system
+ * has correct routing entries. Add routes for devices that where
+ * unknown during the first enumeration pass through the switch.
+ */
+static void rio_update_route_tables(struct rio_net *net)
+{
+ struct rio_dev *rdev, *swrdev;
+ struct rio_switch *rswitch;
+ u8 sport;
+ u16 destid;
+
+ list_for_each_entry(rdev, &net->devices, net_list) {
+
+ destid = rdev->destid;
+
+ list_for_each_entry(rswitch, &net->switches, node) {
+
+ if (rio_is_switch(rdev) && (rdev->rswitch == rswitch))
+ continue;
+
+ if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
+ swrdev = sw_to_rio_dev(rswitch);
+
+ /* Skip if destid ends in empty switch*/
+ if (swrdev->destid == destid)
+ continue;
+
+ sport = RIO_GET_PORT_NUM(swrdev->swpinfo);
+
+ rio_route_add_entry(swrdev, RIO_GLOBAL_TABLE,
+ destid, sport, 0);
+ rswitch->route_table[destid] = sport;
+ }
+ }
+ }
+}
+
+/**
+ * rio_init_em - Initializes RIO Error Management (for switches)
+ * @rdev: RIO device
+ *
+ * For each enumerated switch, call device-specific error management
+ * initialization routine (if supplied by the switch driver).
+ */
+static void rio_init_em(struct rio_dev *rdev)
+{
+ if (rio_is_switch(rdev) && (rdev->em_efptr) &&
+ rdev->rswitch->ops && rdev->rswitch->ops->em_init) {
+ rdev->rswitch->ops->em_init(rdev);
+ }
+}
+
+/**
+ * rio_enum_mport- Start enumeration through a master port
+ * @mport: Master port to send transactions
+ * @flags: Enumeration control flags
+ *
+ * Starts the enumeration process. If somebody has enumerated our
+ * master port device, then give up. If not and we have an active
+ * link, then start recursive peer enumeration. Returns %0 if
+ * enumeration succeeds or %-EBUSY if enumeration fails.
+ */
+static int rio_enum_mport(struct rio_mport *mport, u32 flags)
+{
+ struct rio_net *net = NULL;
+ int rc = 0;
+
+ printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
+ mport->name);
+
+ /*
+ * To avoid multiple start requests (repeat enumeration is not supported
+ * by this method) check if enumeration/discovery was performed for this
+ * mport: if mport was added into the list of mports for a net exit
+ * with error.
+ */
+ if (mport->nnode.next || mport->nnode.prev)
+ return -EBUSY;
+
+ /* If somebody else enumerated our master port device, bail. */
+ if (rio_enum_host(mport) < 0) {
+ printk(KERN_INFO
+ "RIO: master port %d device has been enumerated by a remote host\n",
+ mport->id);
+ rc = -EBUSY;
+ goto out;
+ }
+
+ /* If master port has an active link, allocate net and enum peers */
+ if (rio_mport_is_active(mport)) {
+ net = rio_scan_alloc_net(mport, 1, 0);
+ if (!net) {
+ printk(KERN_ERR "RIO: failed to allocate new net\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* reserve mport destID in new net */
+ rio_destid_reserve(net, mport->host_deviceid);
+
+ /* Enable Input Output Port (transmitter receiver) */
+ rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
+
+ /* Set component tag for host */
+ rio_local_write_config_32(mport, RIO_COMPONENT_TAG_CSR,
+ next_comptag++);
+
+ next_destid = rio_destid_alloc(net);
+
+ if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {
+ /* A higher priority host won enumeration, bail. */
+ printk(KERN_INFO
+ "RIO: master port %d device has lost enumeration to a remote host\n",
+ mport->id);
+ rio_clear_locks(net);
+ rc = -EBUSY;
+ goto out;
+ }
+ /* free the last allocated destID (unused) */
+ rio_destid_free(net, next_destid);
+ rio_update_route_tables(net);
+ rio_clear_locks(net);
+ rio_pw_enable(mport, 1);
+ } else {
+ printk(KERN_INFO "RIO: master port %d link inactive\n",
+ mport->id);
+ rc = -EINVAL;
+ }
+
+ out:
+ return rc;
+}
+
+/**
+ * rio_build_route_tables- Generate route tables from switch route entries
+ * @net: RIO network to run route tables scan on
+ *
+ * For each switch device, generate a route table by copying existing
+ * route entries from the switch.
+ */
+static void rio_build_route_tables(struct rio_net *net)
+{
+ struct rio_switch *rswitch;
+ struct rio_dev *rdev;
+ int i;
+ u8 sport;
+
+ list_for_each_entry(rswitch, &net->switches, node) {
+ rdev = sw_to_rio_dev(rswitch);
+
+ rio_lock_device(net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ for (i = 0;
+ i < RIO_MAX_ROUTE_ENTRIES(net->hport->sys_size);
+ i++) {
+ if (rio_route_get_entry(rdev, RIO_GLOBAL_TABLE,
+ i, &sport, 0) < 0)
+ continue;
+ rswitch->route_table[i] = sport;
+ }
+
+ rio_unlock_device(net->hport, rdev->destid, rdev->hopcount);
+ }
+}
+
+/**
+ * rio_disc_mport- Start discovery through a master port
+ * @mport: Master port to send transactions
+ * @flags: discovery control flags
+ *
+ * Starts the discovery process. If we have an active link,
+ * then wait for the signal that enumeration is complete (if wait
+ * is allowed).
+ * When enumeration completion is signaled, start recursive
+ * peer discovery. Returns %0 if discovery succeeds or %-EBUSY
+ * on failure.
+ */
+static int rio_disc_mport(struct rio_mport *mport, u32 flags)
+{
+ struct rio_net *net = NULL;
+ unsigned long to_end;
+
+ printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
+ mport->name);
+
+ /* If master port has an active link, allocate net and discover peers */
+ if (rio_mport_is_active(mport)) {
+ if (rio_enum_complete(mport))
+ goto enum_done;
+ else if (flags & RIO_SCAN_ENUM_NO_WAIT)
+ return -EAGAIN;
+
+ pr_debug("RIO: wait for enumeration to complete...\n");
+
+ to_end = jiffies + CONFIG_RAPIDIO_DISC_TIMEOUT * HZ;
+ while (time_before(jiffies, to_end)) {
+ if (rio_enum_complete(mport))
+ goto enum_done;
+ msleep(10);
+ }
+
+ pr_debug("RIO: discovery timeout on mport %d %s\n",
+ mport->id, mport->name);
+ goto bail;
+enum_done:
+ pr_debug("RIO: ... enumeration done\n");
+
+ net = rio_scan_alloc_net(mport, 0, 0);
+ if (!net) {
+ printk(KERN_ERR "RIO: Failed to allocate new net\n");
+ goto bail;
+ }
+
+ /* Read DestID assigned by enumerator */
+ rio_local_read_config_32(mport, RIO_DID_CSR,
+ &mport->host_deviceid);
+ mport->host_deviceid = RIO_GET_DID(mport->sys_size,
+ mport->host_deviceid);
+
+ if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
+ 0, NULL, 0) < 0) {
+ printk(KERN_INFO
+ "RIO: master port %d device has failed discovery\n",
+ mport->id);
+ goto bail;
+ }
+
+ rio_build_route_tables(net);
+ }
+
+ return 0;
+bail:
+ return -EBUSY;
+}
+
+static struct rio_scan rio_scan_ops = {
+ .owner = THIS_MODULE,
+ .enumerate = rio_enum_mport,
+ .discover = rio_disc_mport,
+};
+
+static bool scan;
+module_param(scan, bool, 0);
+MODULE_PARM_DESC(scan, "Start RapidIO network enumeration/discovery "
+ "(default = 0)");
+
+/**
+ * rio_basic_attach:
+ *
+ * When this enumeration/discovery method is loaded as a module this function
+ * registers its specific enumeration and discover routines for all available
+ * RapidIO mport devices. The "scan" command line parameter controls ability of
+ * the module to start RapidIO enumeration/discovery automatically.
+ *
+ * Returns 0 for success or -EIO if unable to register itself.
+ *
+ * This enumeration/discovery method cannot be unloaded and therefore does not
+ * provide a matching cleanup_module routine.
+ */
+
+static int __init rio_basic_attach(void)
+{
+ if (rio_register_scan(RIO_MPORT_ANY, &rio_scan_ops))
+ return -EIO;
+ if (scan)
+ rio_init_mports();
+ return 0;
+}
+
+late_initcall(rio_basic_attach);
+
+MODULE_DESCRIPTION("Basic RapidIO enumeration/discovery");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/rio-sysfs.c b/drivers/rapidio/rio-sysfs.c
new file mode 100644
index 000000000..f76796024
--- /dev/null
+++ b/drivers/rapidio/rio-sysfs.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO sysfs attributes and support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/stat.h>
+#include <linux/capability.h>
+
+#include "rio.h"
+
+/* Sysfs support */
+#define rio_config_attr(field, format_string) \
+static ssize_t \
+field##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct rio_dev *rdev = to_rio_dev(dev); \
+ \
+ return sprintf(buf, format_string, rdev->field); \
+} \
+static DEVICE_ATTR_RO(field);
+
+rio_config_attr(did, "0x%04x\n");
+rio_config_attr(vid, "0x%04x\n");
+rio_config_attr(device_rev, "0x%08x\n");
+rio_config_attr(asm_did, "0x%04x\n");
+rio_config_attr(asm_vid, "0x%04x\n");
+rio_config_attr(asm_rev, "0x%04x\n");
+rio_config_attr(destid, "0x%04x\n");
+rio_config_attr(hopcount, "0x%02x\n");
+
+static ssize_t routes_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ char *str = buf;
+ int i;
+
+ for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
+ i++) {
+ if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
+ continue;
+ str +=
+ sprintf(str, "%04x %02x\n", i,
+ rdev->rswitch->route_table[i]);
+ }
+
+ return (str - buf);
+}
+static DEVICE_ATTR_RO(routes);
+
+static ssize_t lprev_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+
+ return sprintf(buf, "%s\n",
+ (rdev->prev) ? rio_name(rdev->prev) : "root");
+}
+static DEVICE_ATTR_RO(lprev);
+
+static ssize_t lnext_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ char *str = buf;
+ int i;
+
+ if (rdev->pef & RIO_PEF_SWITCH) {
+ for (i = 0; i < RIO_GET_TOTAL_PORTS(rdev->swpinfo); i++) {
+ if (rdev->rswitch->nextdev[i])
+ str += sprintf(str, "%s\n",
+ rio_name(rdev->rswitch->nextdev[i]));
+ else
+ str += sprintf(str, "null\n");
+ }
+ }
+
+ return str - buf;
+}
+static DEVICE_ATTR_RO(lnext);
+
+static ssize_t modalias_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+
+ return sprintf(buf, "rapidio:v%04Xd%04Xav%04Xad%04X\n",
+ rdev->vid, rdev->did, rdev->asm_vid, rdev->asm_did);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *rio_dev_attrs[] = {
+ &dev_attr_did.attr,
+ &dev_attr_vid.attr,
+ &dev_attr_device_rev.attr,
+ &dev_attr_asm_did.attr,
+ &dev_attr_asm_vid.attr,
+ &dev_attr_asm_rev.attr,
+ &dev_attr_lprev.attr,
+ &dev_attr_destid.attr,
+ &dev_attr_modalias.attr,
+
+ /* Switch-only attributes */
+ &dev_attr_routes.attr,
+ &dev_attr_lnext.attr,
+ &dev_attr_hopcount.attr,
+ NULL,
+};
+
+static ssize_t
+rio_read_config(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct rio_dev *dev = to_rio_dev(kobj_to_dev(kobj));
+ unsigned int size = 0x100;
+ loff_t init_off = off;
+ u8 *data = (u8 *) buf;
+
+ /* Several chips lock up trying to read undefined config space */
+ if (capable(CAP_SYS_ADMIN))
+ size = RIO_MAINT_SPACE_SZ;
+
+ if (off >= size)
+ return 0;
+ if (off + count > size) {
+ size -= off;
+ count = size;
+ } else {
+ size = count;
+ }
+
+ if ((off & 1) && size) {
+ u8 val;
+ rio_read_config_8(dev, off, &val);
+ data[off - init_off] = val;
+ off++;
+ size--;
+ }
+
+ if ((off & 3) && size > 2) {
+ u16 val;
+ rio_read_config_16(dev, off, &val);
+ data[off - init_off] = (val >> 8) & 0xff;
+ data[off - init_off + 1] = val & 0xff;
+ off += 2;
+ size -= 2;
+ }
+
+ while (size > 3) {
+ u32 val;
+ rio_read_config_32(dev, off, &val);
+ data[off - init_off] = (val >> 24) & 0xff;
+ data[off - init_off + 1] = (val >> 16) & 0xff;
+ data[off - init_off + 2] = (val >> 8) & 0xff;
+ data[off - init_off + 3] = val & 0xff;
+ off += 4;
+ size -= 4;
+ }
+
+ if (size >= 2) {
+ u16 val;
+ rio_read_config_16(dev, off, &val);
+ data[off - init_off] = (val >> 8) & 0xff;
+ data[off - init_off + 1] = val & 0xff;
+ off += 2;
+ size -= 2;
+ }
+
+ if (size > 0) {
+ u8 val;
+ rio_read_config_8(dev, off, &val);
+ data[off - init_off] = val;
+ off++;
+ --size;
+ }
+
+ return count;
+}
+
+static ssize_t
+rio_write_config(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct rio_dev *dev = to_rio_dev(kobj_to_dev(kobj));
+ unsigned int size = count;
+ loff_t init_off = off;
+ u8 *data = (u8 *) buf;
+
+ if (off >= RIO_MAINT_SPACE_SZ)
+ return 0;
+ if (off + count > RIO_MAINT_SPACE_SZ) {
+ size = RIO_MAINT_SPACE_SZ - off;
+ count = size;
+ }
+
+ if ((off & 1) && size) {
+ rio_write_config_8(dev, off, data[off - init_off]);
+ off++;
+ size--;
+ }
+
+ if ((off & 3) && (size > 2)) {
+ u16 val = data[off - init_off + 1];
+ val |= (u16) data[off - init_off] << 8;
+ rio_write_config_16(dev, off, val);
+ off += 2;
+ size -= 2;
+ }
+
+ while (size > 3) {
+ u32 val = data[off - init_off + 3];
+ val |= (u32) data[off - init_off + 2] << 8;
+ val |= (u32) data[off - init_off + 1] << 16;
+ val |= (u32) data[off - init_off] << 24;
+ rio_write_config_32(dev, off, val);
+ off += 4;
+ size -= 4;
+ }
+
+ if (size >= 2) {
+ u16 val = data[off - init_off + 1];
+ val |= (u16) data[off - init_off] << 8;
+ rio_write_config_16(dev, off, val);
+ off += 2;
+ size -= 2;
+ }
+
+ if (size) {
+ rio_write_config_8(dev, off, data[off - init_off]);
+ off++;
+ --size;
+ }
+
+ return count;
+}
+
+static struct bin_attribute rio_config_attr = {
+ .attr = {
+ .name = "config",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = RIO_MAINT_SPACE_SZ,
+ .read = rio_read_config,
+ .write = rio_write_config,
+};
+
+static struct bin_attribute *rio_dev_bin_attrs[] = {
+ &rio_config_attr,
+ NULL,
+};
+
+static umode_t rio_dev_is_attr_visible(struct kobject *kobj,
+ struct attribute *attr, int n)
+{
+ struct rio_dev *rdev = to_rio_dev(kobj_to_dev(kobj));
+ umode_t mode = attr->mode;
+
+ if (!(rdev->pef & RIO_PEF_SWITCH) &&
+ (attr == &dev_attr_routes.attr ||
+ attr == &dev_attr_lnext.attr ||
+ attr == &dev_attr_hopcount.attr)) {
+ /*
+ * Hide switch-specific attributes for a non-switch device.
+ */
+ mode = 0;
+ }
+
+ return mode;
+}
+
+static const struct attribute_group rio_dev_group = {
+ .attrs = rio_dev_attrs,
+ .is_visible = rio_dev_is_attr_visible,
+ .bin_attrs = rio_dev_bin_attrs,
+};
+
+const struct attribute_group *rio_dev_groups[] = {
+ &rio_dev_group,
+ NULL,
+};
+
+static ssize_t scan_store(struct bus_type *bus, const char *buf, size_t count)
+{
+ long val;
+ int rc;
+
+ if (kstrtol(buf, 0, &val) < 0)
+ return -EINVAL;
+
+ if (val == RIO_MPORT_ANY) {
+ rc = rio_init_mports();
+ goto exit;
+ }
+
+ if (val < 0 || val >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ rc = rio_mport_scan((int)val);
+exit:
+ if (!rc)
+ rc = count;
+
+ return rc;
+}
+static BUS_ATTR_WO(scan);
+
+static struct attribute *rio_bus_attrs[] = {
+ &bus_attr_scan.attr,
+ NULL,
+};
+
+static const struct attribute_group rio_bus_group = {
+ .attrs = rio_bus_attrs,
+};
+
+const struct attribute_group *rio_bus_groups[] = {
+ &rio_bus_group,
+ NULL,
+};
+
+static ssize_t
+port_destid_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ if (mport)
+ return sprintf(buf, "0x%04x\n", mport->host_deviceid);
+ else
+ return -ENODEV;
+}
+static DEVICE_ATTR_RO(port_destid);
+
+static ssize_t sys_size_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ if (mport)
+ return sprintf(buf, "%u\n", mport->sys_size);
+ else
+ return -ENODEV;
+}
+static DEVICE_ATTR_RO(sys_size);
+
+static struct attribute *rio_mport_attrs[] = {
+ &dev_attr_port_destid.attr,
+ &dev_attr_sys_size.attr,
+ NULL,
+};
+
+static const struct attribute_group rio_mport_group = {
+ .attrs = rio_mport_attrs,
+};
+
+const struct attribute_group *rio_mport_groups[] = {
+ &rio_mport_group,
+ NULL,
+};
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
new file mode 100644
index 000000000..9544b8ee0
--- /dev/null
+++ b/drivers/rapidio/rio.c
@@ -0,0 +1,2251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * RapidIO interconnect services
+ * (RapidIO Interconnect Specification, http://www.rapidio.org)
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * Copyright 2009 - 2013 Integrated Device Technology, Inc.
+ * Alex Bounine <alexandre.bounine@idt.com>
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/rio_regs.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include "rio.h"
+
+/*
+ * struct rio_pwrite - RIO portwrite event
+ * @node: Node in list of doorbell events
+ * @pwcback: Doorbell event callback
+ * @context: Handler specific context to pass on event
+ */
+struct rio_pwrite {
+ struct list_head node;
+
+ int (*pwcback)(struct rio_mport *mport, void *context,
+ union rio_pw_msg *msg, int step);
+ void *context;
+};
+
+MODULE_DESCRIPTION("RapidIO Subsystem Core");
+MODULE_AUTHOR("Matt Porter <mporter@kernel.crashing.org>");
+MODULE_AUTHOR("Alexandre Bounine <alexandre.bounine@idt.com>");
+MODULE_LICENSE("GPL");
+
+static int hdid[RIO_MAX_MPORTS];
+static int ids_num;
+module_param_array(hdid, int, &ids_num, 0);
+MODULE_PARM_DESC(hdid,
+ "Destination ID assignment to local RapidIO controllers");
+
+static LIST_HEAD(rio_devices);
+static LIST_HEAD(rio_nets);
+static DEFINE_SPINLOCK(rio_global_list_lock);
+
+static LIST_HEAD(rio_mports);
+static LIST_HEAD(rio_scans);
+static DEFINE_MUTEX(rio_mport_list_lock);
+static unsigned char next_portid;
+static DEFINE_SPINLOCK(rio_mmap_lock);
+
+/**
+ * rio_local_get_device_id - Get the base/extended device id for a port
+ * @port: RIO master port from which to get the deviceid
+ *
+ * Reads the base/extended device id from the local device
+ * implementing the master port. Returns the 8/16-bit device
+ * id.
+ */
+u16 rio_local_get_device_id(struct rio_mport *port)
+{
+ u32 result;
+
+ rio_local_read_config_32(port, RIO_DID_CSR, &result);
+
+ return (RIO_GET_DID(port->sys_size, result));
+}
+EXPORT_SYMBOL_GPL(rio_local_get_device_id);
+
+/**
+ * rio_query_mport - Query mport device attributes
+ * @port: mport device to query
+ * @mport_attr: mport attributes data structure
+ *
+ * Returns attributes of specified mport through the
+ * pointer to attributes data structure.
+ */
+int rio_query_mport(struct rio_mport *port,
+ struct rio_mport_attr *mport_attr)
+{
+ if (!port->ops->query_mport)
+ return -ENODATA;
+ return port->ops->query_mport(port, mport_attr);
+}
+EXPORT_SYMBOL(rio_query_mport);
+
+/**
+ * rio_alloc_net- Allocate and initialize a new RIO network data structure
+ * @mport: Master port associated with the RIO network
+ *
+ * Allocates a RIO network structure, initializes per-network
+ * list heads, and adds the associated master port to the
+ * network list of associated master ports. Returns a
+ * RIO network pointer on success or %NULL on failure.
+ */
+struct rio_net *rio_alloc_net(struct rio_mport *mport)
+{
+ struct rio_net *net = kzalloc(sizeof(*net), GFP_KERNEL);
+
+ if (net) {
+ INIT_LIST_HEAD(&net->node);
+ INIT_LIST_HEAD(&net->devices);
+ INIT_LIST_HEAD(&net->switches);
+ INIT_LIST_HEAD(&net->mports);
+ mport->net = net;
+ }
+ return net;
+}
+EXPORT_SYMBOL_GPL(rio_alloc_net);
+
+int rio_add_net(struct rio_net *net)
+{
+ int err;
+
+ err = device_register(&net->dev);
+ if (err)
+ return err;
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&net->node, &rio_nets);
+ spin_unlock(&rio_global_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_net);
+
+void rio_free_net(struct rio_net *net)
+{
+ spin_lock(&rio_global_list_lock);
+ if (!list_empty(&net->node))
+ list_del(&net->node);
+ spin_unlock(&rio_global_list_lock);
+ if (net->release)
+ net->release(net);
+ device_unregister(&net->dev);
+}
+EXPORT_SYMBOL_GPL(rio_free_net);
+
+/**
+ * rio_local_set_device_id - Set the base/extended device id for a port
+ * @port: RIO master port
+ * @did: Device ID value to be written
+ *
+ * Writes the base/extended device id from a device.
+ */
+void rio_local_set_device_id(struct rio_mport *port, u16 did)
+{
+ rio_local_write_config_32(port, RIO_DID_CSR,
+ RIO_SET_DID(port->sys_size, did));
+}
+EXPORT_SYMBOL_GPL(rio_local_set_device_id);
+
+/**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list. Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+ int err;
+
+ atomic_set(&rdev->state, RIO_DEVICE_RUNNING);
+ err = device_register(&rdev->dev);
+ if (err)
+ return err;
+
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&rdev->global_list, &rio_devices);
+ if (rdev->net) {
+ list_add_tail(&rdev->net_list, &rdev->net->devices);
+ if (rdev->pef & RIO_PEF_SWITCH)
+ list_add_tail(&rdev->rswitch->node,
+ &rdev->net->switches);
+ }
+ spin_unlock(&rio_global_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/*
+ * rio_del_device - removes a RIO device from the device model
+ * @rdev: RIO device
+ * @state: device state to set during removal process
+ *
+ * Removes the RIO device to the kernel device list and subsystem's device list.
+ * Clears sysfs entries for the removed device.
+ */
+void rio_del_device(struct rio_dev *rdev, enum rio_device_state state)
+{
+ pr_debug("RIO: %s: removing %s\n", __func__, rio_name(rdev));
+ atomic_set(&rdev->state, state);
+ spin_lock(&rio_global_list_lock);
+ list_del(&rdev->global_list);
+ if (rdev->net) {
+ list_del(&rdev->net_list);
+ if (rdev->pef & RIO_PEF_SWITCH) {
+ list_del(&rdev->rswitch->node);
+ kfree(rdev->rswitch->route_table);
+ }
+ }
+ spin_unlock(&rio_global_list_lock);
+ device_unregister(&rdev->dev);
+}
+EXPORT_SYMBOL_GPL(rio_del_device);
+
+/**
+ * rio_request_inb_mbox - request inbound mailbox service
+ * @mport: RIO master port from which to allocate the mailbox resource
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox number to claim
+ * @entries: Number of entries in inbound mailbox queue
+ * @minb: Callback to execute when inbound message is received
+ *
+ * Requests ownership of an inbound mailbox resource and binds
+ * a callback function to the resource. Returns %0 on success.
+ */
+int rio_request_inb_mbox(struct rio_mport *mport,
+ void *dev_id,
+ int mbox,
+ int entries,
+ void (*minb) (struct rio_mport * mport, void *dev_id, int mbox,
+ int slot))
+{
+ int rc = -ENOSYS;
+ struct resource *res;
+
+ if (!mport->ops->open_inb_mbox)
+ goto out;
+
+ res = kzalloc(sizeof(*res), GFP_KERNEL);
+ if (res) {
+ rio_init_mbox_res(res, mbox, mbox);
+
+ /* Make sure this mailbox isn't in use */
+ rc = request_resource(&mport->riores[RIO_INB_MBOX_RESOURCE],
+ res);
+ if (rc < 0) {
+ kfree(res);
+ goto out;
+ }
+
+ mport->inb_msg[mbox].res = res;
+
+ /* Hook the inbound message callback */
+ mport->inb_msg[mbox].mcback = minb;
+
+ rc = mport->ops->open_inb_mbox(mport, dev_id, mbox, entries);
+ if (rc) {
+ mport->inb_msg[mbox].mcback = NULL;
+ mport->inb_msg[mbox].res = NULL;
+ release_resource(res);
+ kfree(res);
+ }
+ } else
+ rc = -ENOMEM;
+
+ out:
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
+
+/**
+ * rio_release_inb_mbox - release inbound mailbox message service
+ * @mport: RIO master port from which to release the mailbox resource
+ * @mbox: Mailbox number to release
+ *
+ * Releases ownership of an inbound mailbox resource. Returns 0
+ * if the request has been satisfied.
+ */
+int rio_release_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ int rc;
+
+ if (!mport->ops->close_inb_mbox || !mport->inb_msg[mbox].res)
+ return -EINVAL;
+
+ mport->ops->close_inb_mbox(mport, mbox);
+ mport->inb_msg[mbox].mcback = NULL;
+
+ rc = release_resource(mport->inb_msg[mbox].res);
+ if (rc)
+ return rc;
+
+ kfree(mport->inb_msg[mbox].res);
+ mport->inb_msg[mbox].res = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
+
+/**
+ * rio_request_outb_mbox - request outbound mailbox service
+ * @mport: RIO master port from which to allocate the mailbox resource
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox number to claim
+ * @entries: Number of entries in outbound mailbox queue
+ * @moutb: Callback to execute when outbound message is sent
+ *
+ * Requests ownership of an outbound mailbox resource and binds
+ * a callback function to the resource. Returns 0 on success.
+ */
+int rio_request_outb_mbox(struct rio_mport *mport,
+ void *dev_id,
+ int mbox,
+ int entries,
+ void (*moutb) (struct rio_mport * mport, void *dev_id, int mbox, int slot))
+{
+ int rc = -ENOSYS;
+ struct resource *res;
+
+ if (!mport->ops->open_outb_mbox)
+ goto out;
+
+ res = kzalloc(sizeof(*res), GFP_KERNEL);
+ if (res) {
+ rio_init_mbox_res(res, mbox, mbox);
+
+ /* Make sure this outbound mailbox isn't in use */
+ rc = request_resource(&mport->riores[RIO_OUTB_MBOX_RESOURCE],
+ res);
+ if (rc < 0) {
+ kfree(res);
+ goto out;
+ }
+
+ mport->outb_msg[mbox].res = res;
+
+ /* Hook the inbound message callback */
+ mport->outb_msg[mbox].mcback = moutb;
+
+ rc = mport->ops->open_outb_mbox(mport, dev_id, mbox, entries);
+ if (rc) {
+ mport->outb_msg[mbox].mcback = NULL;
+ mport->outb_msg[mbox].res = NULL;
+ release_resource(res);
+ kfree(res);
+ }
+ } else
+ rc = -ENOMEM;
+
+ out:
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
+
+/**
+ * rio_release_outb_mbox - release outbound mailbox message service
+ * @mport: RIO master port from which to release the mailbox resource
+ * @mbox: Mailbox number to release
+ *
+ * Releases ownership of an inbound mailbox resource. Returns 0
+ * if the request has been satisfied.
+ */
+int rio_release_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ int rc;
+
+ if (!mport->ops->close_outb_mbox || !mport->outb_msg[mbox].res)
+ return -EINVAL;
+
+ mport->ops->close_outb_mbox(mport, mbox);
+ mport->outb_msg[mbox].mcback = NULL;
+
+ rc = release_resource(mport->outb_msg[mbox].res);
+ if (rc)
+ return rc;
+
+ kfree(mport->outb_msg[mbox].res);
+ mport->outb_msg[mbox].res = NULL;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+
+/**
+ * rio_setup_inb_dbell - bind inbound doorbell callback
+ * @mport: RIO master port to bind the doorbell callback
+ * @dev_id: Device specific pointer to pass on event
+ * @res: Doorbell message resource
+ * @dinb: Callback to execute when doorbell is received
+ *
+ * Adds a doorbell resource/callback pair into a port's
+ * doorbell event list. Returns 0 if the request has been
+ * satisfied.
+ */
+static int
+rio_setup_inb_dbell(struct rio_mport *mport, void *dev_id, struct resource *res,
+ void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src, u16 dst,
+ u16 info))
+{
+ struct rio_dbell *dbell = kmalloc(sizeof(*dbell), GFP_KERNEL);
+
+ if (!dbell)
+ return -ENOMEM;
+
+ dbell->res = res;
+ dbell->dinb = dinb;
+ dbell->dev_id = dev_id;
+
+ mutex_lock(&mport->lock);
+ list_add_tail(&dbell->node, &mport->dbells);
+ mutex_unlock(&mport->lock);
+ return 0;
+}
+
+/**
+ * rio_request_inb_dbell - request inbound doorbell message service
+ * @mport: RIO master port from which to allocate the doorbell resource
+ * @dev_id: Device specific pointer to pass on event
+ * @start: Doorbell info range start
+ * @end: Doorbell info range end
+ * @dinb: Callback to execute when doorbell is received
+ *
+ * Requests ownership of an inbound doorbell resource and binds
+ * a callback function to the resource. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_request_inb_dbell(struct rio_mport *mport,
+ void *dev_id,
+ u16 start,
+ u16 end,
+ void (*dinb) (struct rio_mport * mport, void *dev_id, u16 src,
+ u16 dst, u16 info))
+{
+ int rc;
+ struct resource *res = kzalloc(sizeof(*res), GFP_KERNEL);
+
+ if (res) {
+ rio_init_dbell_res(res, start, end);
+
+ /* Make sure these doorbells aren't in use */
+ rc = request_resource(&mport->riores[RIO_DOORBELL_RESOURCE],
+ res);
+ if (rc < 0) {
+ kfree(res);
+ goto out;
+ }
+
+ /* Hook the doorbell callback */
+ rc = rio_setup_inb_dbell(mport, dev_id, res, dinb);
+ } else
+ rc = -ENOMEM;
+
+ out:
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_dbell);
+
+/**
+ * rio_release_inb_dbell - release inbound doorbell message service
+ * @mport: RIO master port from which to release the doorbell resource
+ * @start: Doorbell info range start
+ * @end: Doorbell info range end
+ *
+ * Releases ownership of an inbound doorbell resource and removes
+ * callback from the doorbell event list. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_dbell(struct rio_mport *mport, u16 start, u16 end)
+{
+ int rc = 0, found = 0;
+ struct rio_dbell *dbell;
+
+ mutex_lock(&mport->lock);
+ list_for_each_entry(dbell, &mport->dbells, node) {
+ if ((dbell->res->start == start) && (dbell->res->end == end)) {
+ list_del(&dbell->node);
+ found = 1;
+ break;
+ }
+ }
+ mutex_unlock(&mport->lock);
+
+ /* If we can't find an exact match, fail */
+ if (!found) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Release the doorbell resource */
+ rc = release_resource(dbell->res);
+
+ /* Free the doorbell event */
+ kfree(dbell);
+
+ out:
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_dbell);
+
+/**
+ * rio_request_outb_dbell - request outbound doorbell message range
+ * @rdev: RIO device from which to allocate the doorbell resource
+ * @start: Doorbell message range start
+ * @end: Doorbell message range end
+ *
+ * Requests ownership of a doorbell message range. Returns a resource
+ * if the request has been satisfied or %NULL on failure.
+ */
+struct resource *rio_request_outb_dbell(struct rio_dev *rdev, u16 start,
+ u16 end)
+{
+ struct resource *res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+
+ if (res) {
+ rio_init_dbell_res(res, start, end);
+
+ /* Make sure these doorbells aren't in use */
+ if (request_resource(&rdev->riores[RIO_DOORBELL_RESOURCE], res)
+ < 0) {
+ kfree(res);
+ res = NULL;
+ }
+ }
+
+ return res;
+}
+EXPORT_SYMBOL_GPL(rio_request_outb_dbell);
+
+/**
+ * rio_release_outb_dbell - release outbound doorbell message range
+ * @rdev: RIO device from which to release the doorbell resource
+ * @res: Doorbell resource to be freed
+ *
+ * Releases ownership of a doorbell message range. Returns 0 if the
+ * request has been satisfied.
+ */
+int rio_release_outb_dbell(struct rio_dev *rdev, struct resource *res)
+{
+ int rc = release_resource(res);
+
+ kfree(res);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_outb_dbell);
+
+/**
+ * rio_add_mport_pw_handler - add port-write message handler into the list
+ * of mport specific pw handlers
+ * @mport: RIO master port to bind the portwrite callback
+ * @context: Handler specific context to pass on event
+ * @pwcback: Callback to execute when portwrite is received
+ *
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_add_mport_pw_handler(struct rio_mport *mport, void *context,
+ int (*pwcback)(struct rio_mport *mport,
+ void *context, union rio_pw_msg *msg, int step))
+{
+ struct rio_pwrite *pwrite = kzalloc(sizeof(*pwrite), GFP_KERNEL);
+
+ if (!pwrite)
+ return -ENOMEM;
+
+ pwrite->pwcback = pwcback;
+ pwrite->context = context;
+ mutex_lock(&mport->lock);
+ list_add_tail(&pwrite->node, &mport->pwrites);
+ mutex_unlock(&mport->lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_mport_pw_handler);
+
+/**
+ * rio_del_mport_pw_handler - remove port-write message handler from the list
+ * of mport specific pw handlers
+ * @mport: RIO master port to bind the portwrite callback
+ * @context: Registered handler specific context to pass on event
+ * @pwcback: Registered callback function
+ *
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_del_mport_pw_handler(struct rio_mport *mport, void *context,
+ int (*pwcback)(struct rio_mport *mport,
+ void *context, union rio_pw_msg *msg, int step))
+{
+ int rc = -EINVAL;
+ struct rio_pwrite *pwrite;
+
+ mutex_lock(&mport->lock);
+ list_for_each_entry(pwrite, &mport->pwrites, node) {
+ if (pwrite->pwcback == pwcback && pwrite->context == context) {
+ list_del(&pwrite->node);
+ kfree(pwrite);
+ rc = 0;
+ break;
+ }
+ }
+ mutex_unlock(&mport->lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_del_mport_pw_handler);
+
+/**
+ * rio_request_inb_pwrite - request inbound port-write message service for
+ * specific RapidIO device
+ * @rdev: RIO device to which register inbound port-write callback routine
+ * @pwcback: Callback routine to execute when port-write is received
+ *
+ * Binds a port-write callback function to the RapidIO device.
+ * Returns 0 if the request has been satisfied.
+ */
+int rio_request_inb_pwrite(struct rio_dev *rdev,
+ int (*pwcback)(struct rio_dev *rdev, union rio_pw_msg *msg, int step))
+{
+ int rc = 0;
+
+ spin_lock(&rio_global_list_lock);
+ if (rdev->pwcback)
+ rc = -ENOMEM;
+ else
+ rdev->pwcback = pwcback;
+
+ spin_unlock(&rio_global_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_request_inb_pwrite);
+
+/**
+ * rio_release_inb_pwrite - release inbound port-write message service
+ * associated with specific RapidIO device
+ * @rdev: RIO device which registered for inbound port-write callback
+ *
+ * Removes callback from the rio_dev structure. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_release_inb_pwrite(struct rio_dev *rdev)
+{
+ int rc = -ENOMEM;
+
+ spin_lock(&rio_global_list_lock);
+ if (rdev->pwcback) {
+ rdev->pwcback = NULL;
+ rc = 0;
+ }
+
+ spin_unlock(&rio_global_list_lock);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_release_inb_pwrite);
+
+/**
+ * rio_pw_enable - Enables/disables port-write handling by a master port
+ * @mport: Master port associated with port-write handling
+ * @enable: 1=enable, 0=disable
+ */
+void rio_pw_enable(struct rio_mport *mport, int enable)
+{
+ if (mport->ops->pwenable) {
+ mutex_lock(&mport->lock);
+
+ if ((enable && ++mport->pwe_refcnt == 1) ||
+ (!enable && mport->pwe_refcnt && --mport->pwe_refcnt == 0))
+ mport->ops->pwenable(mport, enable);
+ mutex_unlock(&mport->lock);
+ }
+}
+EXPORT_SYMBOL_GPL(rio_pw_enable);
+
+/**
+ * rio_map_inb_region -- Map inbound memory region.
+ * @mport: Master port.
+ * @local: physical address of memory region to be mapped
+ * @rbase: RIO base address assigned to this window
+ * @size: Size of the memory region
+ * @rflags: Flags for mapping.
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from RIO space to local memory.
+ */
+int rio_map_inb_region(struct rio_mport *mport, dma_addr_t local,
+ u64 rbase, u32 size, u32 rflags)
+{
+ int rc;
+ unsigned long flags;
+
+ if (!mport->ops->map_inb)
+ return -1;
+ spin_lock_irqsave(&rio_mmap_lock, flags);
+ rc = mport->ops->map_inb(mport, local, rbase, size, rflags);
+ spin_unlock_irqrestore(&rio_mmap_lock, flags);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_map_inb_region);
+
+/**
+ * rio_unmap_inb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @lstart: physical address of memory region to be unmapped
+ */
+void rio_unmap_inb_region(struct rio_mport *mport, dma_addr_t lstart)
+{
+ unsigned long flags;
+ if (!mport->ops->unmap_inb)
+ return;
+ spin_lock_irqsave(&rio_mmap_lock, flags);
+ mport->ops->unmap_inb(mport, lstart);
+ spin_unlock_irqrestore(&rio_mmap_lock, flags);
+}
+EXPORT_SYMBOL_GPL(rio_unmap_inb_region);
+
+/**
+ * rio_map_outb_region -- Map outbound memory region.
+ * @mport: Master port.
+ * @destid: destination id window points to
+ * @rbase: RIO base address window translates to
+ * @size: Size of the memory region
+ * @rflags: Flags for mapping.
+ * @local: physical address of memory region mapped
+ *
+ * Return: 0 -- Success.
+ *
+ * This function will create the mapping from RIO space to local memory.
+ */
+int rio_map_outb_region(struct rio_mport *mport, u16 destid, u64 rbase,
+ u32 size, u32 rflags, dma_addr_t *local)
+{
+ int rc;
+ unsigned long flags;
+
+ if (!mport->ops->map_outb)
+ return -ENODEV;
+
+ spin_lock_irqsave(&rio_mmap_lock, flags);
+ rc = mport->ops->map_outb(mport, destid, rbase, size,
+ rflags, local);
+ spin_unlock_irqrestore(&rio_mmap_lock, flags);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_map_outb_region);
+
+/**
+ * rio_unmap_outb_region -- Unmap the inbound memory region
+ * @mport: Master port
+ * @destid: destination id mapping points to
+ * @rstart: RIO base address window translates to
+ */
+void rio_unmap_outb_region(struct rio_mport *mport, u16 destid, u64 rstart)
+{
+ unsigned long flags;
+
+ if (!mport->ops->unmap_outb)
+ return;
+
+ spin_lock_irqsave(&rio_mmap_lock, flags);
+ mport->ops->unmap_outb(mport, destid, rstart);
+ spin_unlock_irqrestore(&rio_mmap_lock, flags);
+}
+EXPORT_SYMBOL_GPL(rio_unmap_outb_region);
+
+/**
+ * rio_mport_get_physefb - Helper function that returns register offset
+ * for Physical Layer Extended Features Block.
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @rmap: pointer to location to store register map type info
+ */
+u32
+rio_mport_get_physefb(struct rio_mport *port, int local,
+ u16 destid, u8 hopcount, u32 *rmap)
+{
+ u32 ext_ftr_ptr;
+ u32 ftr_header;
+
+ ext_ftr_ptr = rio_mport_get_efb(port, local, destid, hopcount, 0);
+
+ while (ext_ftr_ptr) {
+ if (local)
+ rio_local_read_config_32(port, ext_ftr_ptr,
+ &ftr_header);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &ftr_header);
+
+ ftr_header = RIO_GET_BLOCK_ID(ftr_header);
+ switch (ftr_header) {
+
+ case RIO_EFB_SER_EP_ID:
+ case RIO_EFB_SER_EP_REC_ID:
+ case RIO_EFB_SER_EP_FREE_ID:
+ case RIO_EFB_SER_EP_M1_ID:
+ case RIO_EFB_SER_EP_SW_M1_ID:
+ case RIO_EFB_SER_EPF_M1_ID:
+ case RIO_EFB_SER_EPF_SW_M1_ID:
+ *rmap = 1;
+ return ext_ftr_ptr;
+
+ case RIO_EFB_SER_EP_M2_ID:
+ case RIO_EFB_SER_EP_SW_M2_ID:
+ case RIO_EFB_SER_EPF_M2_ID:
+ case RIO_EFB_SER_EPF_SW_M2_ID:
+ *rmap = 2;
+ return ext_ftr_ptr;
+
+ default:
+ break;
+ }
+
+ ext_ftr_ptr = rio_mport_get_efb(port, local, destid,
+ hopcount, ext_ftr_ptr);
+ }
+
+ return ext_ftr_ptr;
+}
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
+
+/**
+ * rio_get_comptag - Begin or continue searching for a RIO device by component tag
+ * @comp_tag: RIO component tag to match
+ * @from: Previous RIO device found in search, or %NULL for new search
+ *
+ * Iterates through the list of known RIO devices. If a RIO device is
+ * found with a matching @comp_tag, a pointer to its device
+ * structure is returned. Otherwise, %NULL is returned. A new search
+ * is initiated by passing %NULL to the @from argument. Otherwise, if
+ * @from is not %NULL, searches continue from next device on the global
+ * list.
+ */
+struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from)
+{
+ struct list_head *n;
+ struct rio_dev *rdev;
+
+ spin_lock(&rio_global_list_lock);
+ n = from ? from->global_list.next : rio_devices.next;
+
+ while (n && (n != &rio_devices)) {
+ rdev = rio_dev_g(n);
+ if (rdev->comp_tag == comp_tag)
+ goto exit;
+ n = n->next;
+ }
+ rdev = NULL;
+exit:
+ spin_unlock(&rio_global_list_lock);
+ return rdev;
+}
+EXPORT_SYMBOL_GPL(rio_get_comptag);
+
+/**
+ * rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to set LOCKOUT bit
+ * @lock: Operation : set (=1) or clear (=0)
+ */
+int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
+{
+ u32 regval;
+
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+ &regval);
+ if (lock)
+ regval |= RIO_PORT_N_CTL_LOCKOUT;
+ else
+ regval &= ~RIO_PORT_N_CTL_LOCKOUT;
+
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+ regval);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+ int local, u16 destid,
+ u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+ u32 regval;
+ u32 ext_ftr_ptr;
+ u32 rmap;
+
+ /*
+ * enable rx input tx output port
+ */
+ pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+ "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid,
+ hopcount, &rmap);
+
+ if (local) {
+ rio_local_read_config_32(port,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap),
+ &regval);
+ } else {
+ if (rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+ &regval) < 0)
+ return -EIO;
+ }
+
+ regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX;
+
+ if (local) {
+ rio_local_write_config_32(port,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval);
+ } else {
+ if (rio_mport_write_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+ regval) < 0)
+ return -EIO;
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
+
+/**
+ * rio_chk_dev_route - Validate route to the specified device.
+ * @rdev: RIO device failed to respond
+ * @nrdev: Last active device on the route to rdev
+ * @npnum: nrdev's port number on the route to rdev
+ *
+ * Follows a route to the specified RIO device to determine the last available
+ * device (and corresponding RIO port) on the route.
+ */
+static int
+rio_chk_dev_route(struct rio_dev *rdev, struct rio_dev **nrdev, int *npnum)
+{
+ u32 result;
+ int p_port, rc = -EIO;
+ struct rio_dev *prev = NULL;
+
+ /* Find switch with failed RIO link */
+ while (rdev->prev && (rdev->prev->pef & RIO_PEF_SWITCH)) {
+ if (!rio_read_config_32(rdev->prev, RIO_DEV_ID_CAR, &result)) {
+ prev = rdev->prev;
+ break;
+ }
+ rdev = rdev->prev;
+ }
+
+ if (!prev)
+ goto err_out;
+
+ p_port = prev->rswitch->route_table[rdev->destid];
+
+ if (p_port != RIO_INVALID_ROUTE) {
+ pr_debug("RIO: link failed on [%s]-P%d\n",
+ rio_name(prev), p_port);
+ *nrdev = prev;
+ *npnum = p_port;
+ rc = 0;
+ } else
+ pr_debug("RIO: failed to trace route to %s\n", rio_name(rdev));
+err_out:
+ return rc;
+}
+
+/**
+ * rio_mport_chk_dev_access - Validate access to the specified device.
+ * @mport: Master port to send transactions
+ * @destid: Device destination ID in network
+ * @hopcount: Number of hops into the network
+ */
+int
+rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount)
+{
+ int i = 0;
+ u32 tmp;
+
+ while (rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_DEV_ID_CAR, &tmp)) {
+ i++;
+ if (i == RIO_MAX_CHK_RETRY)
+ return -EIO;
+ mdelay(1);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
+
+/**
+ * rio_chk_dev_access - Validate access to the specified device.
+ * @rdev: Pointer to RIO device control structure
+ */
+static int rio_chk_dev_access(struct rio_dev *rdev)
+{
+ return rio_mport_chk_dev_access(rdev->net->hport,
+ rdev->destid, rdev->hopcount);
+}
+
+/**
+ * rio_get_input_status - Sends a Link-Request/Input-Status control symbol and
+ * returns link-response (if requested).
+ * @rdev: RIO devive to issue Input-status command
+ * @pnum: Device port number to issue the command
+ * @lnkresp: Response from a link partner
+ */
+static int
+rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
+{
+ u32 regval;
+ int checkcount;
+
+ if (lnkresp) {
+ /* Read from link maintenance response register
+ * to clear valid bit */
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
+ &regval);
+ udelay(50);
+ }
+
+ /* Issue Input-status command */
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum),
+ RIO_MNT_REQ_CMD_IS);
+
+ /* Exit if the response is not expected */
+ if (!lnkresp)
+ return 0;
+
+ checkcount = 3;
+ while (checkcount--) {
+ udelay(50);
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
+ &regval);
+ if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
+ *lnkresp = regval;
+ return 0;
+ }
+ }
+
+ return -EIO;
+}
+
+/**
+ * rio_clr_err_stopped - Clears port Error-stopped states.
+ * @rdev: Pointer to RIO device control structure
+ * @pnum: Switch port number to clear errors
+ * @err_status: port error status (if 0 reads register from device)
+ *
+ * TODO: Currently this routine is not compatible with recovery process
+ * specified for idt_gen3 RapidIO switch devices. It has to be reviewed
+ * to implement universal recovery process that is compatible full range
+ * off available devices.
+ * IDT gen3 switch driver now implements HW-specific error handler that
+ * issues soft port reset to the port to reset ERR_STOP bits and ackIDs.
+ */
+static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
+{
+ struct rio_dev *nextdev = rdev->rswitch->nextdev[pnum];
+ u32 regval;
+ u32 far_ackid, far_linkstat, near_ackid;
+
+ if (err_status == 0)
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
+
+ if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) {
+ pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
+ /*
+ * Send a Link-Request/Input-Status control symbol
+ */
+ if (rio_get_input_status(rdev, pnum, &regval)) {
+ pr_debug("RIO_EM: Input-status response timeout\n");
+ goto rd_err;
+ }
+
+ pr_debug("RIO_EM: SP%d Input-status response=0x%08x\n",
+ pnum, regval);
+ far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
+ far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
+ &regval);
+ pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
+ near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
+ pr_debug("RIO_EM: SP%d far_ackID=0x%02x far_linkstat=0x%02x" \
+ " near_ackID=0x%02x\n",
+ pnum, far_ackid, far_linkstat, near_ackid);
+
+ /*
+ * If required, synchronize ackIDs of near and
+ * far sides.
+ */
+ if ((far_ackid != ((regval & RIO_PORT_N_ACK_OUTSTAND) >> 8)) ||
+ (far_ackid != (regval & RIO_PORT_N_ACK_OUTBOUND))) {
+ /* Align near outstanding/outbound ackIDs with
+ * far inbound.
+ */
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
+ (near_ackid << 24) |
+ (far_ackid << 8) | far_ackid);
+ /* Align far outstanding/outbound ackIDs with
+ * near inbound.
+ */
+ far_ackid++;
+ if (!nextdev) {
+ pr_debug("RIO_EM: nextdev pointer == NULL\n");
+ goto rd_err;
+ }
+
+ rio_write_config_32(nextdev,
+ RIO_DEV_PORT_N_ACK_STS_CSR(nextdev,
+ RIO_GET_PORT_NUM(nextdev->swpinfo)),
+ (far_ackid << 24) |
+ (near_ackid << 8) | near_ackid);
+ }
+rd_err:
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
+ pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
+ }
+
+ if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) {
+ pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
+ rio_get_input_status(nextdev,
+ RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
+ udelay(50);
+
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
+ pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
+ }
+
+ return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0;
+}
+
+/**
+ * rio_inb_pwrite_handler - inbound port-write message handler
+ * @mport: mport device associated with port-write
+ * @pw_msg: pointer to inbound port-write message
+ *
+ * Processes an inbound port-write message. Returns 0 if the request
+ * has been satisfied.
+ */
+int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
+{
+ struct rio_dev *rdev;
+ u32 err_status, em_perrdet, em_ltlerrdet;
+ int rc, portnum;
+ struct rio_pwrite *pwrite;
+
+#ifdef DEBUG_PW
+ {
+ u32 i;
+
+ pr_debug("%s: PW to mport_%d:\n", __func__, mport->id);
+ for (i = 0; i < RIO_PW_MSG_SIZE / sizeof(u32); i = i + 4) {
+ pr_debug("0x%02x: %08x %08x %08x %08x\n",
+ i * 4, pw_msg->raw[i], pw_msg->raw[i + 1],
+ pw_msg->raw[i + 2], pw_msg->raw[i + 3]);
+ }
+ }
+#endif
+
+ rdev = rio_get_comptag((pw_msg->em.comptag & RIO_CTAG_UDEVID), NULL);
+ if (rdev) {
+ pr_debug("RIO: Port-Write message from %s\n", rio_name(rdev));
+ } else {
+ pr_debug("RIO: %s No matching device for CTag 0x%08x\n",
+ __func__, pw_msg->em.comptag);
+ }
+
+ /* Call a device-specific handler (if it is registered for the device).
+ * This may be the service for endpoints that send device-specific
+ * port-write messages. End-point messages expected to be handled
+ * completely by EP specific device driver.
+ * For switches rc==0 signals that no standard processing required.
+ */
+ if (rdev && rdev->pwcback) {
+ rc = rdev->pwcback(rdev, pw_msg, 0);
+ if (rc == 0)
+ return 0;
+ }
+
+ mutex_lock(&mport->lock);
+ list_for_each_entry(pwrite, &mport->pwrites, node)
+ pwrite->pwcback(mport, pwrite->context, pw_msg, 0);
+ mutex_unlock(&mport->lock);
+
+ if (!rdev)
+ return 0;
+
+ /*
+ * FIXME: The code below stays as it was before for now until we decide
+ * how to do default PW handling in combination with per-mport callbacks
+ */
+
+ portnum = pw_msg->em.is_port & 0xFF;
+
+ /* Check if device and route to it are functional:
+ * Sometimes devices may send PW message(s) just before being
+ * powered down (or link being lost).
+ */
+ if (rio_chk_dev_access(rdev)) {
+ pr_debug("RIO: device access failed - get link partner\n");
+ /* Scan route to the device and identify failed link.
+ * This will replace device and port reported in PW message.
+ * PW message should not be used after this point.
+ */
+ if (rio_chk_dev_route(rdev, &rdev, &portnum)) {
+ pr_err("RIO: Route trace for %s failed\n",
+ rio_name(rdev));
+ return -EIO;
+ }
+ pw_msg = NULL;
+ }
+
+ /* For End-point devices processing stops here */
+ if (!(rdev->pef & RIO_PEF_SWITCH))
+ return 0;
+
+ if (rdev->phys_efptr == 0) {
+ pr_err("RIO_PW: Bad switch initialization for %s\n",
+ rio_name(rdev));
+ return 0;
+ }
+
+ /*
+ * Process the port-write notification from switch
+ */
+ if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
+ rdev->rswitch->ops->em_handle(rdev, portnum);
+
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+ &err_status);
+ pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);
+
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
+
+ if (!(rdev->rswitch->port_ok & (1 << portnum))) {
+ rdev->rswitch->port_ok |= (1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 0);
+ /* Schedule Insertion Service */
+ pr_debug("RIO_PW: Device Insertion on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
+
+ /* Clear error-stopped states (if reported).
+ * Depending on the link partner state, two attempts
+ * may be needed for successful recovery.
+ */
+ if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) {
+ if (rio_clr_err_stopped(rdev, portnum, err_status))
+ rio_clr_err_stopped(rdev, portnum, 0);
+ }
+ } else { /* if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT) */
+
+ if (rdev->rswitch->port_ok & (1 << portnum)) {
+ rdev->rswitch->port_ok &= ~(1 << portnum);
+ rio_set_port_lockout(rdev, portnum, 1);
+
+ if (rdev->phys_rmap == 1) {
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum),
+ RIO_PORT_N_ACK_CLEAR);
+ } else {
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum),
+ RIO_PORT_N_OB_ACK_CLEAR);
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum),
+ 0);
+ }
+
+ /* Schedule Extraction Service */
+ pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
+ rio_name(rdev), portnum);
+ }
+ }
+
+ rio_read_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+ if (em_perrdet) {
+ pr_debug("RIO_PW: RIO_EM_P%d_ERR_DETECT=0x%08x\n",
+ portnum, em_perrdet);
+ /* Clear EM Port N Error Detect CSR */
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), 0);
+ }
+
+ rio_read_config_32(rdev,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+ if (em_ltlerrdet) {
+ pr_debug("RIO_PW: RIO_EM_LTL_ERR_DETECT=0x%08x\n",
+ em_ltlerrdet);
+ /* Clear EM L/T Layer Error Detect CSR */
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, 0);
+ }
+
+ /* Clear remaining error bits and Port-Write Pending bit */
+ rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+ err_status);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_inb_pwrite_handler);
+
+/**
+ * rio_mport_get_efb - get pointer to next extended features block
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @from: Offset of current Extended Feature block header (if 0 starts
+ * from ExtFeaturePtr)
+ */
+u32
+rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u32 from)
+{
+ u32 reg_val;
+
+ if (from == 0) {
+ if (local)
+ rio_local_read_config_32(port, RIO_ASM_INFO_CAR,
+ &reg_val);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_ASM_INFO_CAR, &reg_val);
+ return reg_val & RIO_EXT_FTR_PTR_MASK;
+ } else {
+ if (local)
+ rio_local_read_config_32(port, from, &reg_val);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ from, &reg_val);
+ return RIO_GET_BLOCK_ID(reg_val);
+ }
+}
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
+
+/**
+ * rio_mport_get_feature - query for devices' extended features
+ * @port: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @ftr: Extended feature code
+ *
+ * Tell if a device supports a given RapidIO capability.
+ * Returns the offset of the requested extended feature
+ * block within the device's RIO configuration space or
+ * 0 in case the device does not support it.
+ */
+u32
+rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
+ u8 hopcount, int ftr)
+{
+ u32 asm_info, ext_ftr_ptr, ftr_header;
+
+ if (local)
+ rio_local_read_config_32(port, RIO_ASM_INFO_CAR, &asm_info);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_ASM_INFO_CAR, &asm_info);
+
+ ext_ftr_ptr = asm_info & RIO_EXT_FTR_PTR_MASK;
+
+ while (ext_ftr_ptr) {
+ if (local)
+ rio_local_read_config_32(port, ext_ftr_ptr,
+ &ftr_header);
+ else
+ rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr, &ftr_header);
+ if (RIO_GET_BLOCK_ID(ftr_header) == ftr)
+ return ext_ftr_ptr;
+
+ ext_ftr_ptr = RIO_GET_BLOCK_PTR(ftr_header);
+ if (!ext_ftr_ptr)
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
+
+/**
+ * rio_std_route_add_entry - Add switch route table entry using standard
+ * registers defined in RIO specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: destination port for specified destID
+ */
+static int
+rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ (u32)route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (u32)route_port);
+ }
+
+ udelay(10);
+ return 0;
+}
+
+/**
+ * rio_std_route_get_entry - Read switch route table entry (port number)
+ * associated with specified destID using standard registers defined in RIO
+ * specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: returned destination port for specified destID
+ */
+static int
+rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ *route_port = (u8)result;
+ }
+
+ return 0;
+}
+
+/**
+ * rio_std_route_clr_table - Clear swotch route table using standard registers
+ * defined in RIO specification rev.1.3.
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ */
+static int
+rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 max_destid = 0xff;
+ u32 i, pef, id_inc = 1, ext_cfg = 0;
+ u32 port_sel = RIO_INVALID_ROUTE;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_PEF_CAR, &pef);
+
+ if (mport->sys_size) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWITCH_RT_LIMIT,
+ &max_destid);
+ max_destid &= RIO_RT_MAX_DESTID;
+ }
+
+ if (pef & RIO_PEF_EXT_RT) {
+ ext_cfg = 0x80000000;
+ id_inc = 4;
+ port_sel = (RIO_INVALID_ROUTE << 24) |
+ (RIO_INVALID_ROUTE << 16) |
+ (RIO_INVALID_ROUTE << 8) |
+ RIO_INVALID_ROUTE;
+ }
+
+ for (i = 0; i <= max_destid;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ ext_cfg | i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ port_sel);
+ i += id_inc;
+ }
+ }
+
+ udelay(10);
+ return 0;
+}
+
+/**
+ * rio_lock_device - Acquires host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ * @wait_ms: Max wait time in msec (0 = no timeout)
+ *
+ * Attepts to acquire host device lock for specified device
+ * Returns 0 if device lock acquired or EINVAL if timeout expires.
+ */
+int rio_lock_device(struct rio_mport *port, u16 destid,
+ u8 hopcount, int wait_ms)
+{
+ u32 result;
+ int tcnt = 0;
+
+ /* Attempt to acquire device lock */
+ rio_mport_write_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+
+ while (result != port->host_deviceid) {
+ if (wait_ms != 0 && tcnt == wait_ms) {
+ pr_debug("RIO: timeout when locking device %x:%x\n",
+ destid, hopcount);
+ return -EINVAL;
+ }
+
+ /* Delay a bit */
+ mdelay(1);
+ tcnt++;
+ /* Try to acquire device lock again */
+ rio_mport_write_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_mport_read_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_lock_device);
+
+/**
+ * rio_unlock_device - Releases host device lock for specified device
+ * @port: Master port to send transaction
+ * @destid: Destination ID for device/switch
+ * @hopcount: Hopcount to reach switch
+ *
+ * Returns 0 if device lock released or EINVAL if fails.
+ */
+int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount)
+{
+ u32 result;
+
+ /* Release device lock */
+ rio_mport_write_config_32(port, destid,
+ hopcount,
+ RIO_HOST_DID_LOCK_CSR,
+ port->host_deviceid);
+ rio_mport_read_config_32(port, destid, hopcount,
+ RIO_HOST_DID_LOCK_CSR, &result);
+ if ((result & 0xffff) != 0xffff) {
+ pr_debug("RIO: badness when releasing device lock %x:%x\n",
+ destid, hopcount);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unlock_device);
+
+/**
+ * rio_route_add_entry- Add a route entry to a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Port number to be routed
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific add_entry() method to add a route
+ * entry into a switch routing table. Otherwise uses standard RT update method
+ * as defined by RapidIO specification. A specific routing table can be selected
+ * using the @table argument if a switch has per port routing tables or
+ * the standard (or global) table may be used by passing
+ * %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_add_entry(struct rio_dev *rdev,
+ u16 table, u16 route_destid, u8 route_port, int lock)
+{
+ int rc = -EINVAL;
+ struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+ if (lock) {
+ rc = rio_lock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (!ops || !ops->add_entry) {
+ rc = rio_std_route_add_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table,
+ route_destid, route_port);
+ } else if (try_module_get(ops->owner)) {
+ rc = ops->add_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table, route_destid,
+ route_port);
+ module_put(ops->owner);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ if (lock)
+ rio_unlock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_add_entry);
+
+/**
+ * rio_route_get_entry- Read an entry from a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @route_destid: Destination ID to be routed
+ * @route_port: Pointer to read port number into
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific get_entry() method to fetch a route
+ * entry from a switch routing table. Otherwise uses standard RT read method
+ * as defined by RapidIO specification. A specific routing table can be selected
+ * using the @table argument if a switch has per port routing tables or
+ * the standard (or global) table may be used by passing
+ * %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_get_entry(struct rio_dev *rdev, u16 table,
+ u16 route_destid, u8 *route_port, int lock)
+{
+ int rc = -EINVAL;
+ struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+ if (lock) {
+ rc = rio_lock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (!ops || !ops->get_entry) {
+ rc = rio_std_route_get_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table,
+ route_destid, route_port);
+ } else if (try_module_get(ops->owner)) {
+ rc = ops->get_entry(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table, route_destid,
+ route_port);
+ module_put(ops->owner);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ if (lock)
+ rio_unlock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_get_entry);
+
+/**
+ * rio_route_clr_table - Clear a switch routing table
+ * @rdev: RIO device
+ * @table: Routing table ID
+ * @lock: apply a hardware lock on switch device flag (1=lock, 0=no_lock)
+ *
+ * If available calls the switch specific clr_table() method to clear a switch
+ * routing table. Otherwise uses standard RT write method as defined by RapidIO
+ * specification. A specific routing table can be selected using the @table
+ * argument if a switch has per port routing tables or the standard (or global)
+ * table may be used by passing %RIO_GLOBAL_TABLE in @table.
+ *
+ * Returns %0 on success or %-EINVAL on failure.
+ */
+int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock)
+{
+ int rc = -EINVAL;
+ struct rio_switch_ops *ops = rdev->rswitch->ops;
+
+ if (lock) {
+ rc = rio_lock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount, 1000);
+ if (rc)
+ return rc;
+ }
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (!ops || !ops->clr_table) {
+ rc = rio_std_route_clr_table(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table);
+ } else if (try_module_get(ops->owner)) {
+ rc = ops->clr_table(rdev->net->hport, rdev->destid,
+ rdev->hopcount, table);
+
+ module_put(ops->owner);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ if (lock)
+ rio_unlock_device(rdev->net->hport, rdev->destid,
+ rdev->hopcount);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_route_clr_table);
+
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+static bool rio_chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct rio_mport *mport = arg;
+
+ /* Check that DMA device belongs to the right MPORT */
+ return mport == container_of(chan->device, struct rio_mport, dma);
+}
+
+/**
+ * rio_request_mport_dma - request RapidIO capable DMA channel associated
+ * with specified local RapidIO mport device.
+ * @mport: RIO mport to perform DMA data transfers
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_mport_dma(struct rio_mport *mport)
+{
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ return dma_request_channel(mask, rio_chan_filter, mport);
+}
+EXPORT_SYMBOL_GPL(rio_request_mport_dma);
+
+/**
+ * rio_request_dma - request RapidIO capable DMA channel that supports
+ * specified target RapidIO device.
+ * @rdev: RIO device associated with DMA transfer
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_dma(struct rio_dev *rdev)
+{
+ return rio_request_mport_dma(rdev->net->hport);
+}
+EXPORT_SYMBOL_GPL(rio_request_dma);
+
+/**
+ * rio_release_dma - release specified DMA channel
+ * @dchan: DMA channel to release
+ */
+void rio_release_dma(struct dma_chan *dchan)
+{
+ dma_release_channel(dchan);
+}
+EXPORT_SYMBOL_GPL(rio_release_dma);
+
+/**
+ * rio_dma_prep_xfer - RapidIO specific wrapper
+ * for device_prep_slave_sg callback defined by DMAENGINE.
+ * @dchan: DMA channel to configure
+ * @destid: target RapidIO device destination ID
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ *
+ * Returns: pointer to DMA transaction descriptor if successful,
+ * error-valued pointer or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_xfer(struct dma_chan *dchan,
+ u16 destid, struct rio_dma_data *data,
+ enum dma_transfer_direction direction, unsigned long flags)
+{
+ struct rio_dma_ext rio_ext;
+
+ if (!dchan->device->device_prep_slave_sg) {
+ pr_err("%s: prep_rio_sg == NULL\n", __func__);
+ return NULL;
+ }
+
+ rio_ext.destid = destid;
+ rio_ext.rio_addr_u = data->rio_addr_u;
+ rio_ext.rio_addr = data->rio_addr;
+ rio_ext.wr_type = data->wr_type;
+
+ return dmaengine_prep_rio_sg(dchan, data->sg, data->sg_len,
+ direction, flags, &rio_ext);
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_xfer);
+
+/**
+ * rio_dma_prep_slave_sg - RapidIO specific wrapper
+ * for device_prep_slave_sg callback defined by DMAENGINE.
+ * @rdev: RIO device control structure
+ * @dchan: DMA channel to configure
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ *
+ * Returns: pointer to DMA transaction descriptor if successful,
+ * error-valued pointer or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev,
+ struct dma_chan *dchan, struct rio_dma_data *data,
+ enum dma_transfer_direction direction, unsigned long flags)
+{
+ return rio_dma_prep_xfer(dchan, rdev->destid, data, direction, flags);
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
+/**
+ * rio_find_mport - find RIO mport by its ID
+ * @mport_id: number (ID) of mport device
+ *
+ * Given a RIO mport number, the desired mport is located
+ * in the global list of mports. If the mport is found, a pointer to its
+ * data structure is returned. If no mport is found, %NULL is returned.
+ */
+struct rio_mport *rio_find_mport(int mport_id)
+{
+ struct rio_mport *port;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id)
+ goto found;
+ }
+ port = NULL;
+found:
+ mutex_unlock(&rio_mport_list_lock);
+
+ return port;
+}
+
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ * (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery operations structure
+ *
+ * Registers enumeration/discovery operations with RapidIO subsystem and
+ * attaches it to the specified mport device (or all available mports
+ * if RIO_MPORT_ANY is specified).
+ *
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY skips mports with valid scan routines (no error).
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+ struct rio_mport *port;
+ struct rio_scan_node *scan;
+ int rc = 0;
+
+ pr_debug("RIO: %s for mport_id=%d\n", __func__, mport_id);
+
+ if ((mport_id != RIO_MPORT_ANY && mport_id >= RIO_MAX_MPORTS) ||
+ !scan_ops)
+ return -EINVAL;
+
+ mutex_lock(&rio_mport_list_lock);
+
+ /*
+ * Check if there is another enumerator already registered for
+ * the same mport ID (including RIO_MPORT_ANY). Multiple enumerators
+ * for the same mport ID are not supported.
+ */
+ list_for_each_entry(scan, &rio_scans, node) {
+ if (scan->mport_id == mport_id) {
+ rc = -EBUSY;
+ goto err_out;
+ }
+ }
+
+ /*
+ * Allocate and initialize new scan registration node.
+ */
+ scan = kzalloc(sizeof(*scan), GFP_KERNEL);
+ if (!scan) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+
+ scan->mport_id = mport_id;
+ scan->ops = scan_ops;
+
+ /*
+ * Traverse the list of registered mports to attach this new scan.
+ *
+ * The new scan with matching mport ID overrides any previously attached
+ * scan assuming that old scan (if any) is the default one (based on the
+ * enumerator registration check above).
+ * If the new scan is the global one, it will be attached only to mports
+ * that do not have their own individual operations already attached.
+ */
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id) {
+ port->nscan = scan_ops;
+ break;
+ } else if (mport_id == RIO_MPORT_ANY && !port->nscan)
+ port->nscan = scan_ops;
+ }
+
+ list_add_tail(&scan->node, &rio_scans);
+
+err_out:
+ mutex_unlock(&rio_mport_list_lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ * unregistered (RIO_MPORT_ANY = apply to all mports that use
+ * the specified scan_ops)
+ * @scan_ops: enumeration/discovery operations structure
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device. If RIO_MPORT_ANY is specified, removes the specified operations from
+ * all mports that have them attached.
+ */
+int rio_unregister_scan(int mport_id, struct rio_scan *scan_ops)
+{
+ struct rio_mport *port;
+ struct rio_scan_node *scan;
+
+ pr_debug("RIO: %s for mport_id=%d\n", __func__, mport_id);
+
+ if (mport_id != RIO_MPORT_ANY && mport_id >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ mutex_lock(&rio_mport_list_lock);
+
+ list_for_each_entry(port, &rio_mports, node)
+ if (port->id == mport_id ||
+ (mport_id == RIO_MPORT_ANY && port->nscan == scan_ops))
+ port->nscan = NULL;
+
+ list_for_each_entry(scan, &rio_scans, node) {
+ if (scan->mport_id == mport_id) {
+ list_del(&scan->node);
+ kfree(scan);
+ break;
+ }
+ }
+
+ mutex_unlock(&rio_mport_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
+/**
+ * rio_mport_scan - execute enumeration/discovery on the specified mport
+ * @mport_id: number (ID) of mport device
+ */
+int rio_mport_scan(int mport_id)
+{
+ struct rio_mport *port = NULL;
+ int rc;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id)
+ goto found;
+ }
+ mutex_unlock(&rio_mport_list_lock);
+ return -ENODEV;
+found:
+ if (!port->nscan) {
+ mutex_unlock(&rio_mport_list_lock);
+ return -EINVAL;
+ }
+
+ if (!try_module_get(port->nscan->owner)) {
+ mutex_unlock(&rio_mport_list_lock);
+ return -ENODEV;
+ }
+
+ mutex_unlock(&rio_mport_list_lock);
+
+ if (port->host_deviceid >= 0)
+ rc = port->nscan->enumerate(port, 0);
+ else
+ rc = port->nscan->discover(port, RIO_SCAN_ENUM_NO_WAIT);
+
+ module_put(port->nscan->owner);
+ return rc;
+}
+
+static struct workqueue_struct *rio_wq;
+
+struct rio_disc_work {
+ struct work_struct work;
+ struct rio_mport *mport;
+};
+
+static void disc_work_handler(struct work_struct *_work)
+{
+ struct rio_disc_work *work;
+
+ work = container_of(_work, struct rio_disc_work, work);
+ pr_debug("RIO: discovery work for mport %d %s\n",
+ work->mport->id, work->mport->name);
+ if (try_module_get(work->mport->nscan->owner)) {
+ work->mport->nscan->discover(work->mport, 0);
+ module_put(work->mport->nscan->owner);
+ }
+}
+
+int rio_init_mports(void)
+{
+ struct rio_mport *port;
+ struct rio_disc_work *work;
+ int n = 0;
+
+ if (!next_portid)
+ return -ENODEV;
+
+ /*
+ * First, run enumerations and check if we need to perform discovery
+ * on any of the registered mports.
+ */
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->host_deviceid >= 0) {
+ if (port->nscan && try_module_get(port->nscan->owner)) {
+ port->nscan->enumerate(port, 0);
+ module_put(port->nscan->owner);
+ }
+ } else
+ n++;
+ }
+ mutex_unlock(&rio_mport_list_lock);
+
+ if (!n)
+ goto no_disc;
+
+ /*
+ * If we have mports that require discovery schedule a discovery work
+ * for each of them. If the code below fails to allocate needed
+ * resources, exit without error to keep results of enumeration
+ * process (if any).
+ * TODO: Implement restart of discovery process for all or
+ * individual discovering mports.
+ */
+ rio_wq = alloc_workqueue("riodisc", 0, 0);
+ if (!rio_wq) {
+ pr_err("RIO: unable allocate rio_wq\n");
+ goto no_disc;
+ }
+
+ work = kcalloc(n, sizeof *work, GFP_KERNEL);
+ if (!work) {
+ destroy_workqueue(rio_wq);
+ goto no_disc;
+ }
+
+ n = 0;
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->host_deviceid < 0 && port->nscan) {
+ work[n].mport = port;
+ INIT_WORK(&work[n].work, disc_work_handler);
+ queue_work(rio_wq, &work[n].work);
+ n++;
+ }
+ }
+
+ flush_workqueue(rio_wq);
+ mutex_unlock(&rio_mport_list_lock);
+ pr_debug("RIO: destroy discovery workqueue\n");
+ destroy_workqueue(rio_wq);
+ kfree(work);
+
+no_disc:
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_init_mports);
+
+static int rio_get_hdid(int index)
+{
+ if (ids_num == 0 || ids_num <= index || index >= RIO_MAX_MPORTS)
+ return -1;
+
+ return hdid[index];
+}
+
+int rio_mport_initialize(struct rio_mport *mport)
+{
+ if (next_portid >= RIO_MAX_MPORTS) {
+ pr_err("RIO: reached specified max number of mports\n");
+ return -ENODEV;
+ }
+
+ atomic_set(&mport->state, RIO_DEVICE_INITIALIZING);
+ mport->id = next_portid++;
+ mport->host_deviceid = rio_get_hdid(mport->id);
+ mport->nscan = NULL;
+ mutex_init(&mport->lock);
+ mport->pwe_refcnt = 0;
+ INIT_LIST_HEAD(&mport->pwrites);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_mport_initialize);
+
+int rio_register_mport(struct rio_mport *port)
+{
+ struct rio_scan_node *scan = NULL;
+ int res = 0;
+
+ mutex_lock(&rio_mport_list_lock);
+
+ /*
+ * Check if there are any registered enumeration/discovery operations
+ * that have to be attached to the added mport.
+ */
+ list_for_each_entry(scan, &rio_scans, node) {
+ if (port->id == scan->mport_id ||
+ scan->mport_id == RIO_MPORT_ANY) {
+ port->nscan = scan->ops;
+ if (port->id == scan->mport_id)
+ break;
+ }
+ }
+
+ list_add_tail(&port->node, &rio_mports);
+ mutex_unlock(&rio_mport_list_lock);
+
+ dev_set_name(&port->dev, "rapidio%d", port->id);
+ port->dev.class = &rio_mport_class;
+ atomic_set(&port->state, RIO_DEVICE_RUNNING);
+
+ res = device_register(&port->dev);
+ if (res) {
+ dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n",
+ port->id, res);
+ mutex_lock(&rio_mport_list_lock);
+ list_del(&port->node);
+ mutex_unlock(&rio_mport_list_lock);
+ put_device(&port->dev);
+ } else {
+ dev_dbg(&port->dev, "RIO: registered mport%d\n", port->id);
+ }
+
+ return res;
+}
+EXPORT_SYMBOL_GPL(rio_register_mport);
+
+static int rio_mport_cleanup_callback(struct device *dev, void *data)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+
+ if (dev->bus == &rio_bus_type)
+ rio_del_device(rdev, RIO_DEVICE_SHUTDOWN);
+ return 0;
+}
+
+static int rio_net_remove_children(struct rio_net *net)
+{
+ /*
+ * Unregister all RapidIO devices residing on this net (this will
+ * invoke notification of registered subsystem interfaces as well).
+ */
+ device_for_each_child(&net->dev, NULL, rio_mport_cleanup_callback);
+ return 0;
+}
+
+int rio_unregister_mport(struct rio_mport *port)
+{
+ pr_debug("RIO: %s %s id=%d\n", __func__, port->name, port->id);
+
+ /* Transition mport to the SHUTDOWN state */
+ if (atomic_cmpxchg(&port->state,
+ RIO_DEVICE_RUNNING,
+ RIO_DEVICE_SHUTDOWN) != RIO_DEVICE_RUNNING) {
+ pr_err("RIO: %s unexpected state transition for mport %s\n",
+ __func__, port->name);
+ }
+
+ if (port->net && port->net->hport == port) {
+ rio_net_remove_children(port->net);
+ rio_free_net(port->net);
+ }
+
+ /*
+ * Unregister all RapidIO devices attached to this mport (this will
+ * invoke notification of registered subsystem interfaces as well).
+ */
+ mutex_lock(&rio_mport_list_lock);
+ list_del(&port->node);
+ mutex_unlock(&rio_mport_list_lock);
+ device_unregister(&port->dev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_mport);
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
new file mode 100644
index 000000000..f482de0d0
--- /dev/null
+++ b/drivers/rapidio/rio.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * RapidIO interconnect services
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ */
+
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/rio.h>
+
+#define RIO_MAX_CHK_RETRY 3
+#define RIO_MPORT_ANY (-1)
+
+/* Functions internal to the RIO core code */
+
+extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
+ u8 hopcount, int ftr);
+extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
+ u16 destid, u8 hopcount, u32 *rmap);
+extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u32 from);
+extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
+ u8 hopcount);
+extern int rio_lock_device(struct rio_mport *port, u16 destid,
+ u8 hopcount, int wait_ms);
+extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount);
+extern int rio_route_add_entry(struct rio_dev *rdev,
+ u16 table, u16 route_destid, u8 route_port, int lock);
+extern int rio_route_get_entry(struct rio_dev *rdev, u16 table,
+ u16 route_destid, u8 *route_port, int lock);
+extern int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock);
+extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
+extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from);
+extern struct rio_net *rio_alloc_net(struct rio_mport *mport);
+extern int rio_add_net(struct rio_net *net);
+extern void rio_free_net(struct rio_net *net);
+extern int rio_add_device(struct rio_dev *rdev);
+extern void rio_del_device(struct rio_dev *rdev, enum rio_device_state state);
+extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid,
+ u8 hopcount, u8 port_num);
+extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops);
+extern int rio_unregister_scan(int mport_id, struct rio_scan *scan_ops);
+extern void rio_attach_device(struct rio_dev *rdev);
+extern struct rio_mport *rio_find_mport(int mport_id);
+extern int rio_mport_scan(int mport_id);
+
+/* Structures internal to the RIO core code */
+extern const struct attribute_group *rio_dev_groups[];
+extern const struct attribute_group *rio_bus_groups[];
+extern const struct attribute_group *rio_mport_groups[];
+
+#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
+#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/rio_cm.c b/drivers/rapidio/rio_cm.c
new file mode 100644
index 000000000..db4c26528
--- /dev/null
+++ b/drivers/rapidio/rio_cm.c
@@ -0,0 +1,2376 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * rio_cm - RapidIO Channelized Messaging Driver
+ *
+ * Copyright 2013-2016 Integrated Device Technology, Inc.
+ * Copyright (c) 2015, Prodrive Technologies
+ * Copyright (c) 2015, RapidIO Trade Association
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/reboot.h>
+#include <linux/bitops.h>
+#include <linux/printk.h>
+#include <linux/rio_cm_cdev.h>
+
+#define DRV_NAME "rio_cm"
+#define DRV_VERSION "1.0.0"
+#define DRV_AUTHOR "Alexandre Bounine <alexandre.bounine@idt.com>"
+#define DRV_DESC "RapidIO Channelized Messaging Driver"
+#define DEV_NAME "rio_cm"
+
+/* Debug output filtering masks */
+enum {
+ DBG_NONE = 0,
+ DBG_INIT = BIT(0), /* driver init */
+ DBG_EXIT = BIT(1), /* driver exit */
+ DBG_MPORT = BIT(2), /* mport add/remove */
+ DBG_RDEV = BIT(3), /* RapidIO device add/remove */
+ DBG_CHOP = BIT(4), /* channel operations */
+ DBG_WAIT = BIT(5), /* waiting for events */
+ DBG_TX = BIT(6), /* message TX */
+ DBG_TX_EVENT = BIT(7), /* message TX event */
+ DBG_RX_DATA = BIT(8), /* inbound data messages */
+ DBG_RX_CMD = BIT(9), /* inbound REQ/ACK/NACK messages */
+ DBG_ALL = ~0,
+};
+
+#ifdef DEBUG
+#define riocm_debug(level, fmt, arg...) \
+ do { \
+ if (DBG_##level & dbg_level) \
+ pr_debug(DRV_NAME ": %s " fmt "\n", \
+ __func__, ##arg); \
+ } while (0)
+#else
+#define riocm_debug(level, fmt, arg...) \
+ no_printk(KERN_DEBUG pr_fmt(DRV_NAME fmt "\n"), ##arg)
+#endif
+
+#define riocm_warn(fmt, arg...) \
+ pr_warn(DRV_NAME ": %s WARNING " fmt "\n", __func__, ##arg)
+
+#define riocm_error(fmt, arg...) \
+ pr_err(DRV_NAME ": %s ERROR " fmt "\n", __func__, ##arg)
+
+
+static int cmbox = 1;
+module_param(cmbox, int, S_IRUGO);
+MODULE_PARM_DESC(cmbox, "RapidIO Mailbox number (default 1)");
+
+static int chstart = 256;
+module_param(chstart, int, S_IRUGO);
+MODULE_PARM_DESC(chstart,
+ "Start channel number for dynamic allocation (default 256)");
+
+#ifdef DEBUG
+static u32 dbg_level = DBG_NONE;
+module_param(dbg_level, uint, S_IWUSR | S_IRUGO);
+MODULE_PARM_DESC(dbg_level, "Debugging output level (default 0 = none)");
+#endif
+
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define RIOCM_TX_RING_SIZE 128
+#define RIOCM_RX_RING_SIZE 128
+#define RIOCM_CONNECT_TO 3 /* connect response TO (in sec) */
+
+#define RIOCM_MAX_CHNUM 0xffff /* Use full range of u16 field */
+#define RIOCM_CHNUM_AUTO 0
+#define RIOCM_MAX_EP_COUNT 0x10000 /* Max number of endpoints */
+
+enum rio_cm_state {
+ RIO_CM_IDLE,
+ RIO_CM_CONNECT,
+ RIO_CM_CONNECTED,
+ RIO_CM_DISCONNECT,
+ RIO_CM_CHAN_BOUND,
+ RIO_CM_LISTEN,
+ RIO_CM_DESTROYING,
+};
+
+enum rio_cm_pkt_type {
+ RIO_CM_SYS = 0xaa,
+ RIO_CM_CHAN = 0x55,
+};
+
+enum rio_cm_chop {
+ CM_CONN_REQ,
+ CM_CONN_ACK,
+ CM_CONN_CLOSE,
+ CM_DATA_MSG,
+};
+
+struct rio_ch_base_bhdr {
+ u32 src_id;
+ u32 dst_id;
+#define RIO_HDR_LETTER_MASK 0xffff0000
+#define RIO_HDR_MBOX_MASK 0x0000ffff
+ u8 src_mbox;
+ u8 dst_mbox;
+ u8 type;
+} __attribute__((__packed__));
+
+struct rio_ch_chan_hdr {
+ struct rio_ch_base_bhdr bhdr;
+ u8 ch_op;
+ u16 dst_ch;
+ u16 src_ch;
+ u16 msg_len;
+ u16 rsrvd;
+} __attribute__((__packed__));
+
+struct tx_req {
+ struct list_head node;
+ struct rio_dev *rdev;
+ void *buffer;
+ size_t len;
+};
+
+struct cm_dev {
+ struct list_head list;
+ struct rio_mport *mport;
+ void *rx_buf[RIOCM_RX_RING_SIZE];
+ int rx_slots;
+ struct mutex rx_lock;
+
+ void *tx_buf[RIOCM_TX_RING_SIZE];
+ int tx_slot;
+ int tx_cnt;
+ int tx_ack_slot;
+ struct list_head tx_reqs;
+ spinlock_t tx_lock;
+
+ struct list_head peers;
+ u32 npeers;
+ struct workqueue_struct *rx_wq;
+ struct work_struct rx_work;
+};
+
+struct chan_rx_ring {
+ void *buf[RIOCM_RX_RING_SIZE];
+ int head;
+ int tail;
+ int count;
+
+ /* Tracking RX buffers reported to upper level */
+ void *inuse[RIOCM_RX_RING_SIZE];
+ int inuse_cnt;
+};
+
+struct rio_channel {
+ u16 id; /* local channel ID */
+ struct kref ref; /* channel refcount */
+ struct file *filp;
+ struct cm_dev *cmdev; /* associated CM device object */
+ struct rio_dev *rdev; /* remote RapidIO device */
+ enum rio_cm_state state;
+ int error;
+ spinlock_t lock;
+ void *context;
+ u32 loc_destid; /* local destID */
+ u32 rem_destid; /* remote destID */
+ u16 rem_channel; /* remote channel ID */
+ struct list_head accept_queue;
+ struct list_head ch_node;
+ struct completion comp;
+ struct completion comp_close;
+ struct chan_rx_ring rx_ring;
+};
+
+struct cm_peer {
+ struct list_head node;
+ struct rio_dev *rdev;
+};
+
+struct rio_cm_work {
+ struct work_struct work;
+ struct cm_dev *cm;
+ void *data;
+};
+
+struct conn_req {
+ struct list_head node;
+ u32 destid; /* requester destID */
+ u16 chan; /* requester channel ID */
+ struct cm_dev *cmdev;
+};
+
+/*
+ * A channel_dev structure represents a CM_CDEV
+ * @cdev Character device
+ * @dev Associated device object
+ */
+struct channel_dev {
+ struct cdev cdev;
+ struct device *dev;
+};
+
+static struct rio_channel *riocm_ch_alloc(u16 ch_num);
+static void riocm_ch_free(struct kref *ref);
+static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev,
+ void *buffer, size_t len);
+static int riocm_ch_close(struct rio_channel *ch);
+
+static DEFINE_SPINLOCK(idr_lock);
+static DEFINE_IDR(ch_idr);
+
+static LIST_HEAD(cm_dev_list);
+static DECLARE_RWSEM(rdev_sem);
+
+static struct class *dev_class;
+static unsigned int dev_major;
+static unsigned int dev_minor_base;
+static dev_t dev_number;
+static struct channel_dev riocm_cdev;
+
+#define is_msg_capable(src_ops, dst_ops) \
+ ((src_ops & RIO_SRC_OPS_DATA_MSG) && \
+ (dst_ops & RIO_DST_OPS_DATA_MSG))
+#define dev_cm_capable(dev) \
+ is_msg_capable(dev->src_ops, dev->dst_ops)
+
+static int riocm_cmp(struct rio_channel *ch, enum rio_cm_state cmp)
+{
+ int ret;
+
+ spin_lock_bh(&ch->lock);
+ ret = (ch->state == cmp);
+ spin_unlock_bh(&ch->lock);
+ return ret;
+}
+
+static int riocm_cmp_exch(struct rio_channel *ch,
+ enum rio_cm_state cmp, enum rio_cm_state exch)
+{
+ int ret;
+
+ spin_lock_bh(&ch->lock);
+ ret = (ch->state == cmp);
+ if (ret)
+ ch->state = exch;
+ spin_unlock_bh(&ch->lock);
+ return ret;
+}
+
+static enum rio_cm_state riocm_exch(struct rio_channel *ch,
+ enum rio_cm_state exch)
+{
+ enum rio_cm_state old;
+
+ spin_lock_bh(&ch->lock);
+ old = ch->state;
+ ch->state = exch;
+ spin_unlock_bh(&ch->lock);
+ return old;
+}
+
+static struct rio_channel *riocm_get_channel(u16 nr)
+{
+ struct rio_channel *ch;
+
+ spin_lock_bh(&idr_lock);
+ ch = idr_find(&ch_idr, nr);
+ if (ch)
+ kref_get(&ch->ref);
+ spin_unlock_bh(&idr_lock);
+ return ch;
+}
+
+static void riocm_put_channel(struct rio_channel *ch)
+{
+ kref_put(&ch->ref, riocm_ch_free);
+}
+
+static void *riocm_rx_get_msg(struct cm_dev *cm)
+{
+ void *msg;
+ int i;
+
+ msg = rio_get_inb_message(cm->mport, cmbox);
+ if (msg) {
+ for (i = 0; i < RIOCM_RX_RING_SIZE; i++) {
+ if (cm->rx_buf[i] == msg) {
+ cm->rx_buf[i] = NULL;
+ cm->rx_slots++;
+ break;
+ }
+ }
+
+ if (i == RIOCM_RX_RING_SIZE)
+ riocm_warn("no record for buffer 0x%p", msg);
+ }
+
+ return msg;
+}
+
+/*
+ * riocm_rx_fill - fills a ring of receive buffers for given cm device
+ * @cm: cm_dev object
+ * @nent: max number of entries to fill
+ *
+ * Returns: none
+ */
+static void riocm_rx_fill(struct cm_dev *cm, int nent)
+{
+ int i;
+
+ if (cm->rx_slots == 0)
+ return;
+
+ for (i = 0; i < RIOCM_RX_RING_SIZE && cm->rx_slots && nent; i++) {
+ if (cm->rx_buf[i] == NULL) {
+ cm->rx_buf[i] = kmalloc(RIO_MAX_MSG_SIZE, GFP_KERNEL);
+ if (cm->rx_buf[i] == NULL)
+ break;
+ rio_add_inb_buffer(cm->mport, cmbox, cm->rx_buf[i]);
+ cm->rx_slots--;
+ nent--;
+ }
+ }
+}
+
+/*
+ * riocm_rx_free - frees all receive buffers associated with given cm device
+ * @cm: cm_dev object
+ *
+ * Returns: none
+ */
+static void riocm_rx_free(struct cm_dev *cm)
+{
+ int i;
+
+ for (i = 0; i < RIOCM_RX_RING_SIZE; i++) {
+ if (cm->rx_buf[i] != NULL) {
+ kfree(cm->rx_buf[i]);
+ cm->rx_buf[i] = NULL;
+ }
+ }
+}
+
+/*
+ * riocm_req_handler - connection request handler
+ * @cm: cm_dev object
+ * @req_data: pointer to the request packet
+ *
+ * Returns: 0 if success, or
+ * -EINVAL if channel is not in correct state,
+ * -ENODEV if cannot find a channel with specified ID,
+ * -ENOMEM if unable to allocate memory to store the request
+ */
+static int riocm_req_handler(struct cm_dev *cm, void *req_data)
+{
+ struct rio_channel *ch;
+ struct conn_req *req;
+ struct rio_ch_chan_hdr *hh = req_data;
+ u16 chnum;
+
+ chnum = ntohs(hh->dst_ch);
+
+ ch = riocm_get_channel(chnum);
+
+ if (!ch)
+ return -ENODEV;
+
+ if (ch->state != RIO_CM_LISTEN) {
+ riocm_debug(RX_CMD, "channel %d is not in listen state", chnum);
+ riocm_put_channel(ch);
+ return -EINVAL;
+ }
+
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req) {
+ riocm_put_channel(ch);
+ return -ENOMEM;
+ }
+
+ req->destid = ntohl(hh->bhdr.src_id);
+ req->chan = ntohs(hh->src_ch);
+ req->cmdev = cm;
+
+ spin_lock_bh(&ch->lock);
+ list_add_tail(&req->node, &ch->accept_queue);
+ spin_unlock_bh(&ch->lock);
+ complete(&ch->comp);
+ riocm_put_channel(ch);
+
+ return 0;
+}
+
+/*
+ * riocm_resp_handler - response to connection request handler
+ * @resp_data: pointer to the response packet
+ *
+ * Returns: 0 if success, or
+ * -EINVAL if channel is not in correct state,
+ * -ENODEV if cannot find a channel with specified ID,
+ */
+static int riocm_resp_handler(void *resp_data)
+{
+ struct rio_channel *ch;
+ struct rio_ch_chan_hdr *hh = resp_data;
+ u16 chnum;
+
+ chnum = ntohs(hh->dst_ch);
+ ch = riocm_get_channel(chnum);
+ if (!ch)
+ return -ENODEV;
+
+ if (ch->state != RIO_CM_CONNECT) {
+ riocm_put_channel(ch);
+ return -EINVAL;
+ }
+
+ riocm_exch(ch, RIO_CM_CONNECTED);
+ ch->rem_channel = ntohs(hh->src_ch);
+ complete(&ch->comp);
+ riocm_put_channel(ch);
+
+ return 0;
+}
+
+/*
+ * riocm_close_handler - channel close request handler
+ * @req_data: pointer to the request packet
+ *
+ * Returns: 0 if success, or
+ * -ENODEV if cannot find a channel with specified ID,
+ * + error codes returned by riocm_ch_close.
+ */
+static int riocm_close_handler(void *data)
+{
+ struct rio_channel *ch;
+ struct rio_ch_chan_hdr *hh = data;
+ int ret;
+
+ riocm_debug(RX_CMD, "for ch=%d", ntohs(hh->dst_ch));
+
+ spin_lock_bh(&idr_lock);
+ ch = idr_find(&ch_idr, ntohs(hh->dst_ch));
+ if (!ch) {
+ spin_unlock_bh(&idr_lock);
+ return -ENODEV;
+ }
+ idr_remove(&ch_idr, ch->id);
+ spin_unlock_bh(&idr_lock);
+
+ riocm_exch(ch, RIO_CM_DISCONNECT);
+
+ ret = riocm_ch_close(ch);
+ if (ret)
+ riocm_debug(RX_CMD, "riocm_ch_close() returned %d", ret);
+
+ return 0;
+}
+
+/*
+ * rio_cm_handler - function that services request (non-data) packets
+ * @cm: cm_dev object
+ * @data: pointer to the packet
+ */
+static void rio_cm_handler(struct cm_dev *cm, void *data)
+{
+ struct rio_ch_chan_hdr *hdr;
+
+ if (!rio_mport_is_running(cm->mport))
+ goto out;
+
+ hdr = data;
+
+ riocm_debug(RX_CMD, "OP=%x for ch=%d from %d",
+ hdr->ch_op, ntohs(hdr->dst_ch), ntohs(hdr->src_ch));
+
+ switch (hdr->ch_op) {
+ case CM_CONN_REQ:
+ riocm_req_handler(cm, data);
+ break;
+ case CM_CONN_ACK:
+ riocm_resp_handler(data);
+ break;
+ case CM_CONN_CLOSE:
+ riocm_close_handler(data);
+ break;
+ default:
+ riocm_error("Invalid packet header");
+ break;
+ }
+out:
+ kfree(data);
+}
+
+/*
+ * rio_rx_data_handler - received data packet handler
+ * @cm: cm_dev object
+ * @buf: data packet
+ *
+ * Returns: 0 if success, or
+ * -ENODEV if cannot find a channel with specified ID,
+ * -EIO if channel is not in CONNECTED state,
+ * -ENOMEM if channel RX queue is full (packet discarded)
+ */
+static int rio_rx_data_handler(struct cm_dev *cm, void *buf)
+{
+ struct rio_ch_chan_hdr *hdr;
+ struct rio_channel *ch;
+
+ hdr = buf;
+
+ riocm_debug(RX_DATA, "for ch=%d", ntohs(hdr->dst_ch));
+
+ ch = riocm_get_channel(ntohs(hdr->dst_ch));
+ if (!ch) {
+ /* Discard data message for non-existing channel */
+ kfree(buf);
+ return -ENODEV;
+ }
+
+ /* Place pointer to the buffer into channel's RX queue */
+ spin_lock(&ch->lock);
+
+ if (ch->state != RIO_CM_CONNECTED) {
+ /* Channel is not ready to receive data, discard a packet */
+ riocm_debug(RX_DATA, "ch=%d is in wrong state=%d",
+ ch->id, ch->state);
+ spin_unlock(&ch->lock);
+ kfree(buf);
+ riocm_put_channel(ch);
+ return -EIO;
+ }
+
+ if (ch->rx_ring.count == RIOCM_RX_RING_SIZE) {
+ /* If RX ring is full, discard a packet */
+ riocm_debug(RX_DATA, "ch=%d is full", ch->id);
+ spin_unlock(&ch->lock);
+ kfree(buf);
+ riocm_put_channel(ch);
+ return -ENOMEM;
+ }
+
+ ch->rx_ring.buf[ch->rx_ring.head] = buf;
+ ch->rx_ring.head++;
+ ch->rx_ring.count++;
+ ch->rx_ring.head %= RIOCM_RX_RING_SIZE;
+
+ complete(&ch->comp);
+
+ spin_unlock(&ch->lock);
+ riocm_put_channel(ch);
+
+ return 0;
+}
+
+/*
+ * rio_ibmsg_handler - inbound message packet handler
+ */
+static void rio_ibmsg_handler(struct work_struct *work)
+{
+ struct cm_dev *cm = container_of(work, struct cm_dev, rx_work);
+ void *data;
+ struct rio_ch_chan_hdr *hdr;
+
+ if (!rio_mport_is_running(cm->mport))
+ return;
+
+ while (1) {
+ mutex_lock(&cm->rx_lock);
+ data = riocm_rx_get_msg(cm);
+ if (data)
+ riocm_rx_fill(cm, 1);
+ mutex_unlock(&cm->rx_lock);
+
+ if (data == NULL)
+ break;
+
+ hdr = data;
+
+ if (hdr->bhdr.type != RIO_CM_CHAN) {
+ /* For now simply discard packets other than channel */
+ riocm_error("Unsupported TYPE code (0x%x). Msg dropped",
+ hdr->bhdr.type);
+ kfree(data);
+ continue;
+ }
+
+ /* Process a channel message */
+ if (hdr->ch_op == CM_DATA_MSG)
+ rio_rx_data_handler(cm, data);
+ else
+ rio_cm_handler(cm, data);
+ }
+}
+
+static void riocm_inb_msg_event(struct rio_mport *mport, void *dev_id,
+ int mbox, int slot)
+{
+ struct cm_dev *cm = dev_id;
+
+ if (rio_mport_is_running(cm->mport) && !work_pending(&cm->rx_work))
+ queue_work(cm->rx_wq, &cm->rx_work);
+}
+
+/*
+ * rio_txcq_handler - TX completion handler
+ * @cm: cm_dev object
+ * @slot: TX queue slot
+ *
+ * TX completion handler also ensures that pending request packets are placed
+ * into transmit queue as soon as a free slot becomes available. This is done
+ * to give higher priority to request packets during high intensity data flow.
+ */
+static void rio_txcq_handler(struct cm_dev *cm, int slot)
+{
+ int ack_slot;
+
+ /* ATTN: Add TX completion notification if/when direct buffer
+ * transfer is implemented. At this moment only correct tracking
+ * of tx_count is important.
+ */
+ riocm_debug(TX_EVENT, "for mport_%d slot %d tx_cnt %d",
+ cm->mport->id, slot, cm->tx_cnt);
+
+ spin_lock(&cm->tx_lock);
+ ack_slot = cm->tx_ack_slot;
+
+ if (ack_slot == slot)
+ riocm_debug(TX_EVENT, "slot == ack_slot");
+
+ while (cm->tx_cnt && ((ack_slot != slot) ||
+ (cm->tx_cnt == RIOCM_TX_RING_SIZE))) {
+
+ cm->tx_buf[ack_slot] = NULL;
+ ++ack_slot;
+ ack_slot &= (RIOCM_TX_RING_SIZE - 1);
+ cm->tx_cnt--;
+ }
+
+ if (cm->tx_cnt < 0 || cm->tx_cnt > RIOCM_TX_RING_SIZE)
+ riocm_error("tx_cnt %d out of sync", cm->tx_cnt);
+
+ WARN_ON((cm->tx_cnt < 0) || (cm->tx_cnt > RIOCM_TX_RING_SIZE));
+
+ cm->tx_ack_slot = ack_slot;
+
+ /*
+ * If there are pending requests, insert them into transmit queue
+ */
+ if (!list_empty(&cm->tx_reqs) && (cm->tx_cnt < RIOCM_TX_RING_SIZE)) {
+ struct tx_req *req, *_req;
+ int rc;
+
+ list_for_each_entry_safe(req, _req, &cm->tx_reqs, node) {
+ list_del(&req->node);
+ cm->tx_buf[cm->tx_slot] = req->buffer;
+ rc = rio_add_outb_message(cm->mport, req->rdev, cmbox,
+ req->buffer, req->len);
+ kfree(req->buffer);
+ kfree(req);
+
+ ++cm->tx_cnt;
+ ++cm->tx_slot;
+ cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1);
+ if (cm->tx_cnt == RIOCM_TX_RING_SIZE)
+ break;
+ }
+ }
+
+ spin_unlock(&cm->tx_lock);
+}
+
+static void riocm_outb_msg_event(struct rio_mport *mport, void *dev_id,
+ int mbox, int slot)
+{
+ struct cm_dev *cm = dev_id;
+
+ if (cm && rio_mport_is_running(cm->mport))
+ rio_txcq_handler(cm, slot);
+}
+
+static int riocm_queue_req(struct cm_dev *cm, struct rio_dev *rdev,
+ void *buffer, size_t len)
+{
+ unsigned long flags;
+ struct tx_req *treq;
+
+ treq = kzalloc(sizeof(*treq), GFP_KERNEL);
+ if (treq == NULL)
+ return -ENOMEM;
+
+ treq->rdev = rdev;
+ treq->buffer = buffer;
+ treq->len = len;
+
+ spin_lock_irqsave(&cm->tx_lock, flags);
+ list_add_tail(&treq->node, &cm->tx_reqs);
+ spin_unlock_irqrestore(&cm->tx_lock, flags);
+ return 0;
+}
+
+/*
+ * riocm_post_send - helper function that places packet into msg TX queue
+ * @cm: cm_dev object
+ * @rdev: target RapidIO device object (required by outbound msg interface)
+ * @buffer: pointer to a packet buffer to send
+ * @len: length of data to transfer
+ * @req: request priority flag
+ *
+ * Returns: 0 if success, or error code otherwise.
+ */
+static int riocm_post_send(struct cm_dev *cm, struct rio_dev *rdev,
+ void *buffer, size_t len)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cm->tx_lock, flags);
+
+ if (cm->mport == NULL) {
+ rc = -ENODEV;
+ goto err_out;
+ }
+
+ if (cm->tx_cnt == RIOCM_TX_RING_SIZE) {
+ riocm_debug(TX, "Tx Queue is full");
+ rc = -EBUSY;
+ goto err_out;
+ }
+
+ cm->tx_buf[cm->tx_slot] = buffer;
+ rc = rio_add_outb_message(cm->mport, rdev, cmbox, buffer, len);
+
+ riocm_debug(TX, "Add buf@%p destid=%x tx_slot=%d tx_cnt=%d",
+ buffer, rdev->destid, cm->tx_slot, cm->tx_cnt);
+
+ ++cm->tx_cnt;
+ ++cm->tx_slot;
+ cm->tx_slot &= (RIOCM_TX_RING_SIZE - 1);
+
+err_out:
+ spin_unlock_irqrestore(&cm->tx_lock, flags);
+ return rc;
+}
+
+/*
+ * riocm_ch_send - sends a data packet to a remote device
+ * @ch_id: local channel ID
+ * @buf: pointer to a data buffer to send (including CM header)
+ * @len: length of data to transfer (including CM header)
+ *
+ * ATTN: ASSUMES THAT THE HEADER SPACE IS RESERVED PART OF THE DATA PACKET
+ *
+ * Returns: 0 if success, or
+ * -EINVAL if one or more input parameters is/are not valid,
+ * -ENODEV if cannot find a channel with specified ID,
+ * -EAGAIN if a channel is not in CONNECTED state,
+ * + error codes returned by HW send routine.
+ */
+static int riocm_ch_send(u16 ch_id, void *buf, int len)
+{
+ struct rio_channel *ch;
+ struct rio_ch_chan_hdr *hdr;
+ int ret;
+
+ if (buf == NULL || ch_id == 0 || len == 0 || len > RIO_MAX_MSG_SIZE)
+ return -EINVAL;
+
+ ch = riocm_get_channel(ch_id);
+ if (!ch) {
+ riocm_error("%s(%d) ch_%d not found", current->comm,
+ task_pid_nr(current), ch_id);
+ return -ENODEV;
+ }
+
+ if (!riocm_cmp(ch, RIO_CM_CONNECTED)) {
+ ret = -EAGAIN;
+ goto err_out;
+ }
+
+ /*
+ * Fill buffer header section with corresponding channel data
+ */
+ hdr = buf;
+
+ hdr->bhdr.src_id = htonl(ch->loc_destid);
+ hdr->bhdr.dst_id = htonl(ch->rem_destid);
+ hdr->bhdr.src_mbox = cmbox;
+ hdr->bhdr.dst_mbox = cmbox;
+ hdr->bhdr.type = RIO_CM_CHAN;
+ hdr->ch_op = CM_DATA_MSG;
+ hdr->dst_ch = htons(ch->rem_channel);
+ hdr->src_ch = htons(ch->id);
+ hdr->msg_len = htons((u16)len);
+
+ /* ATTN: the function call below relies on the fact that underlying
+ * HW-specific add_outb_message() routine copies TX data into its own
+ * internal transfer buffer (true for all RIONET compatible mport
+ * drivers). Must be reviewed if mport driver uses the buffer directly.
+ */
+
+ ret = riocm_post_send(ch->cmdev, ch->rdev, buf, len);
+ if (ret)
+ riocm_debug(TX, "ch %d send_err=%d", ch->id, ret);
+err_out:
+ riocm_put_channel(ch);
+ return ret;
+}
+
+static int riocm_ch_free_rxbuf(struct rio_channel *ch, void *buf)
+{
+ int i, ret = -EINVAL;
+
+ spin_lock_bh(&ch->lock);
+
+ for (i = 0; i < RIOCM_RX_RING_SIZE; i++) {
+ if (ch->rx_ring.inuse[i] == buf) {
+ ch->rx_ring.inuse[i] = NULL;
+ ch->rx_ring.inuse_cnt--;
+ ret = 0;
+ break;
+ }
+ }
+
+ spin_unlock_bh(&ch->lock);
+
+ if (!ret)
+ kfree(buf);
+
+ return ret;
+}
+
+/*
+ * riocm_ch_receive - fetch a data packet received for the specified channel
+ * @ch: local channel ID
+ * @buf: pointer to a packet buffer
+ * @timeout: timeout to wait for incoming packet (in jiffies)
+ *
+ * Returns: 0 and valid buffer pointer if success, or NULL pointer and one of:
+ * -EAGAIN if a channel is not in CONNECTED state,
+ * -ENOMEM if in-use tracking queue is full,
+ * -ETIME if wait timeout expired,
+ * -EINTR if wait was interrupted.
+ */
+static int riocm_ch_receive(struct rio_channel *ch, void **buf, long timeout)
+{
+ void *rxmsg = NULL;
+ int i, ret = 0;
+ long wret;
+
+ if (!riocm_cmp(ch, RIO_CM_CONNECTED)) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ if (ch->rx_ring.inuse_cnt == RIOCM_RX_RING_SIZE) {
+ /* If we do not have entries to track buffers given to upper
+ * layer, reject request.
+ */
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ wret = wait_for_completion_interruptible_timeout(&ch->comp, timeout);
+
+ riocm_debug(WAIT, "wait on %d returned %ld", ch->id, wret);
+
+ if (!wret)
+ ret = -ETIME;
+ else if (wret == -ERESTARTSYS)
+ ret = -EINTR;
+ else
+ ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -ECONNRESET;
+
+ if (ret)
+ goto out;
+
+ spin_lock_bh(&ch->lock);
+
+ rxmsg = ch->rx_ring.buf[ch->rx_ring.tail];
+ ch->rx_ring.buf[ch->rx_ring.tail] = NULL;
+ ch->rx_ring.count--;
+ ch->rx_ring.tail++;
+ ch->rx_ring.tail %= RIOCM_RX_RING_SIZE;
+ ret = -ENOMEM;
+
+ for (i = 0; i < RIOCM_RX_RING_SIZE; i++) {
+ if (ch->rx_ring.inuse[i] == NULL) {
+ ch->rx_ring.inuse[i] = rxmsg;
+ ch->rx_ring.inuse_cnt++;
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret) {
+ /* We have no entry to store pending message: drop it */
+ kfree(rxmsg);
+ rxmsg = NULL;
+ }
+
+ spin_unlock_bh(&ch->lock);
+out:
+ *buf = rxmsg;
+ return ret;
+}
+
+/*
+ * riocm_ch_connect - sends a connect request to a remote device
+ * @loc_ch: local channel ID
+ * @cm: CM device to send connect request
+ * @peer: target RapidIO device
+ * @rem_ch: remote channel ID
+ *
+ * Returns: 0 if success, or
+ * -EINVAL if the channel is not in IDLE state,
+ * -EAGAIN if no connection request available immediately,
+ * -ETIME if ACK response timeout expired,
+ * -EINTR if wait for response was interrupted.
+ */
+static int riocm_ch_connect(u16 loc_ch, struct cm_dev *cm,
+ struct cm_peer *peer, u16 rem_ch)
+{
+ struct rio_channel *ch = NULL;
+ struct rio_ch_chan_hdr *hdr;
+ int ret;
+ long wret;
+
+ ch = riocm_get_channel(loc_ch);
+ if (!ch)
+ return -ENODEV;
+
+ if (!riocm_cmp_exch(ch, RIO_CM_IDLE, RIO_CM_CONNECT)) {
+ ret = -EINVAL;
+ goto conn_done;
+ }
+
+ ch->cmdev = cm;
+ ch->rdev = peer->rdev;
+ ch->context = NULL;
+ ch->loc_destid = cm->mport->host_deviceid;
+ ch->rem_channel = rem_ch;
+
+ /*
+ * Send connect request to the remote RapidIO device
+ */
+
+ hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
+ if (hdr == NULL) {
+ ret = -ENOMEM;
+ goto conn_done;
+ }
+
+ hdr->bhdr.src_id = htonl(ch->loc_destid);
+ hdr->bhdr.dst_id = htonl(peer->rdev->destid);
+ hdr->bhdr.src_mbox = cmbox;
+ hdr->bhdr.dst_mbox = cmbox;
+ hdr->bhdr.type = RIO_CM_CHAN;
+ hdr->ch_op = CM_CONN_REQ;
+ hdr->dst_ch = htons(rem_ch);
+ hdr->src_ch = htons(loc_ch);
+
+ /* ATTN: the function call below relies on the fact that underlying
+ * HW-specific add_outb_message() routine copies TX data into its
+ * internal transfer buffer. Must be reviewed if mport driver uses
+ * this buffer directly.
+ */
+ ret = riocm_post_send(cm, peer->rdev, hdr, sizeof(*hdr));
+
+ if (ret != -EBUSY) {
+ kfree(hdr);
+ } else {
+ ret = riocm_queue_req(cm, peer->rdev, hdr, sizeof(*hdr));
+ if (ret)
+ kfree(hdr);
+ }
+
+ if (ret) {
+ riocm_cmp_exch(ch, RIO_CM_CONNECT, RIO_CM_IDLE);
+ goto conn_done;
+ }
+
+ /* Wait for connect response from the remote device */
+ wret = wait_for_completion_interruptible_timeout(&ch->comp,
+ RIOCM_CONNECT_TO * HZ);
+ riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret);
+
+ if (!wret)
+ ret = -ETIME;
+ else if (wret == -ERESTARTSYS)
+ ret = -EINTR;
+ else
+ ret = riocm_cmp(ch, RIO_CM_CONNECTED) ? 0 : -1;
+
+conn_done:
+ riocm_put_channel(ch);
+ return ret;
+}
+
+static int riocm_send_ack(struct rio_channel *ch)
+{
+ struct rio_ch_chan_hdr *hdr;
+ int ret;
+
+ hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
+ if (hdr == NULL)
+ return -ENOMEM;
+
+ hdr->bhdr.src_id = htonl(ch->loc_destid);
+ hdr->bhdr.dst_id = htonl(ch->rem_destid);
+ hdr->dst_ch = htons(ch->rem_channel);
+ hdr->src_ch = htons(ch->id);
+ hdr->bhdr.src_mbox = cmbox;
+ hdr->bhdr.dst_mbox = cmbox;
+ hdr->bhdr.type = RIO_CM_CHAN;
+ hdr->ch_op = CM_CONN_ACK;
+
+ /* ATTN: the function call below relies on the fact that underlying
+ * add_outb_message() routine copies TX data into its internal transfer
+ * buffer. Review if switching to direct buffer version.
+ */
+ ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr));
+
+ if (ret == -EBUSY && !riocm_queue_req(ch->cmdev,
+ ch->rdev, hdr, sizeof(*hdr)))
+ return 0;
+ kfree(hdr);
+
+ if (ret)
+ riocm_error("send ACK to ch_%d on %s failed (ret=%d)",
+ ch->id, rio_name(ch->rdev), ret);
+ return ret;
+}
+
+/*
+ * riocm_ch_accept - accept incoming connection request
+ * @ch_id: channel ID
+ * @new_ch_id: local mport device
+ * @timeout: wait timeout (if 0 non-blocking call, do not wait if connection
+ * request is not available).
+ *
+ * Returns: pointer to new channel struct if success, or error-valued pointer:
+ * -ENODEV - cannot find specified channel or mport,
+ * -EINVAL - the channel is not in IDLE state,
+ * -EAGAIN - no connection request available immediately (timeout=0),
+ * -ENOMEM - unable to allocate new channel,
+ * -ETIME - wait timeout expired,
+ * -EINTR - wait was interrupted.
+ */
+static struct rio_channel *riocm_ch_accept(u16 ch_id, u16 *new_ch_id,
+ long timeout)
+{
+ struct rio_channel *ch;
+ struct rio_channel *new_ch;
+ struct conn_req *req;
+ struct cm_peer *peer;
+ int found = 0;
+ int err = 0;
+ long wret;
+
+ ch = riocm_get_channel(ch_id);
+ if (!ch)
+ return ERR_PTR(-EINVAL);
+
+ if (!riocm_cmp(ch, RIO_CM_LISTEN)) {
+ err = -EINVAL;
+ goto err_put;
+ }
+
+ /* Don't sleep if this is a non blocking call */
+ if (!timeout) {
+ if (!try_wait_for_completion(&ch->comp)) {
+ err = -EAGAIN;
+ goto err_put;
+ }
+ } else {
+ riocm_debug(WAIT, "on %d", ch->id);
+
+ wret = wait_for_completion_interruptible_timeout(&ch->comp,
+ timeout);
+ if (!wret) {
+ err = -ETIME;
+ goto err_put;
+ } else if (wret == -ERESTARTSYS) {
+ err = -EINTR;
+ goto err_put;
+ }
+ }
+
+ spin_lock_bh(&ch->lock);
+
+ if (ch->state != RIO_CM_LISTEN) {
+ err = -ECANCELED;
+ } else if (list_empty(&ch->accept_queue)) {
+ riocm_debug(WAIT, "on %d accept_queue is empty on completion",
+ ch->id);
+ err = -EIO;
+ }
+
+ spin_unlock_bh(&ch->lock);
+
+ if (err) {
+ riocm_debug(WAIT, "on %d returns %d", ch->id, err);
+ goto err_put;
+ }
+
+ /* Create new channel for this connection */
+ new_ch = riocm_ch_alloc(RIOCM_CHNUM_AUTO);
+
+ if (IS_ERR(new_ch)) {
+ riocm_error("failed to get channel for new req (%ld)",
+ PTR_ERR(new_ch));
+ err = -ENOMEM;
+ goto err_put;
+ }
+
+ spin_lock_bh(&ch->lock);
+
+ req = list_first_entry(&ch->accept_queue, struct conn_req, node);
+ list_del(&req->node);
+ new_ch->cmdev = ch->cmdev;
+ new_ch->loc_destid = ch->loc_destid;
+ new_ch->rem_destid = req->destid;
+ new_ch->rem_channel = req->chan;
+
+ spin_unlock_bh(&ch->lock);
+ riocm_put_channel(ch);
+ ch = NULL;
+ kfree(req);
+
+ down_read(&rdev_sem);
+ /* Find requester's device object */
+ list_for_each_entry(peer, &new_ch->cmdev->peers, node) {
+ if (peer->rdev->destid == new_ch->rem_destid) {
+ riocm_debug(RX_CMD, "found matching device(%s)",
+ rio_name(peer->rdev));
+ found = 1;
+ break;
+ }
+ }
+ up_read(&rdev_sem);
+
+ if (!found) {
+ /* If peer device object not found, simply ignore the request */
+ err = -ENODEV;
+ goto err_put_new_ch;
+ }
+
+ new_ch->rdev = peer->rdev;
+ new_ch->state = RIO_CM_CONNECTED;
+ spin_lock_init(&new_ch->lock);
+
+ /* Acknowledge the connection request. */
+ riocm_send_ack(new_ch);
+
+ *new_ch_id = new_ch->id;
+ return new_ch;
+
+err_put_new_ch:
+ spin_lock_bh(&idr_lock);
+ idr_remove(&ch_idr, new_ch->id);
+ spin_unlock_bh(&idr_lock);
+ riocm_put_channel(new_ch);
+
+err_put:
+ if (ch)
+ riocm_put_channel(ch);
+ *new_ch_id = 0;
+ return ERR_PTR(err);
+}
+
+/*
+ * riocm_ch_listen - puts a channel into LISTEN state
+ * @ch_id: channel ID
+ *
+ * Returns: 0 if success, or
+ * -EINVAL if the specified channel does not exists or
+ * is not in CHAN_BOUND state.
+ */
+static int riocm_ch_listen(u16 ch_id)
+{
+ struct rio_channel *ch = NULL;
+ int ret = 0;
+
+ riocm_debug(CHOP, "(ch_%d)", ch_id);
+
+ ch = riocm_get_channel(ch_id);
+ if (!ch)
+ return -EINVAL;
+ if (!riocm_cmp_exch(ch, RIO_CM_CHAN_BOUND, RIO_CM_LISTEN))
+ ret = -EINVAL;
+ riocm_put_channel(ch);
+ return ret;
+}
+
+/*
+ * riocm_ch_bind - associate a channel object and an mport device
+ * @ch_id: channel ID
+ * @mport_id: local mport device ID
+ * @context: pointer to the additional caller's context
+ *
+ * Returns: 0 if success, or
+ * -ENODEV if cannot find specified mport,
+ * -EINVAL if the specified channel does not exist or
+ * is not in IDLE state.
+ */
+static int riocm_ch_bind(u16 ch_id, u8 mport_id, void *context)
+{
+ struct rio_channel *ch = NULL;
+ struct cm_dev *cm;
+ int rc = -ENODEV;
+
+ riocm_debug(CHOP, "ch_%d to mport_%d", ch_id, mport_id);
+
+ /* Find matching cm_dev object */
+ down_read(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if ((cm->mport->id == mport_id) &&
+ rio_mport_is_running(cm->mport)) {
+ rc = 0;
+ break;
+ }
+ }
+
+ if (rc)
+ goto exit;
+
+ ch = riocm_get_channel(ch_id);
+ if (!ch) {
+ rc = -EINVAL;
+ goto exit;
+ }
+
+ spin_lock_bh(&ch->lock);
+ if (ch->state != RIO_CM_IDLE) {
+ spin_unlock_bh(&ch->lock);
+ rc = -EINVAL;
+ goto err_put;
+ }
+
+ ch->cmdev = cm;
+ ch->loc_destid = cm->mport->host_deviceid;
+ ch->context = context;
+ ch->state = RIO_CM_CHAN_BOUND;
+ spin_unlock_bh(&ch->lock);
+err_put:
+ riocm_put_channel(ch);
+exit:
+ up_read(&rdev_sem);
+ return rc;
+}
+
+/*
+ * riocm_ch_alloc - channel object allocation helper routine
+ * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic)
+ *
+ * Return value: pointer to newly created channel object,
+ * or error-valued pointer
+ */
+static struct rio_channel *riocm_ch_alloc(u16 ch_num)
+{
+ int id;
+ int start, end;
+ struct rio_channel *ch;
+
+ ch = kzalloc(sizeof(*ch), GFP_KERNEL);
+ if (!ch)
+ return ERR_PTR(-ENOMEM);
+
+ if (ch_num) {
+ /* If requested, try to obtain the specified channel ID */
+ start = ch_num;
+ end = ch_num + 1;
+ } else {
+ /* Obtain channel ID from the dynamic allocation range */
+ start = chstart;
+ end = RIOCM_MAX_CHNUM + 1;
+ }
+
+ idr_preload(GFP_KERNEL);
+ spin_lock_bh(&idr_lock);
+ id = idr_alloc_cyclic(&ch_idr, ch, start, end, GFP_NOWAIT);
+ spin_unlock_bh(&idr_lock);
+ idr_preload_end();
+
+ if (id < 0) {
+ kfree(ch);
+ return ERR_PTR(id == -ENOSPC ? -EBUSY : id);
+ }
+
+ ch->id = (u16)id;
+ ch->state = RIO_CM_IDLE;
+ spin_lock_init(&ch->lock);
+ INIT_LIST_HEAD(&ch->accept_queue);
+ INIT_LIST_HEAD(&ch->ch_node);
+ init_completion(&ch->comp);
+ init_completion(&ch->comp_close);
+ kref_init(&ch->ref);
+ ch->rx_ring.head = 0;
+ ch->rx_ring.tail = 0;
+ ch->rx_ring.count = 0;
+ ch->rx_ring.inuse_cnt = 0;
+
+ return ch;
+}
+
+/*
+ * riocm_ch_create - creates a new channel object and allocates ID for it
+ * @ch_num: channel ID (1 ... RIOCM_MAX_CHNUM, 0 = automatic)
+ *
+ * Allocates and initializes a new channel object. If the parameter ch_num > 0
+ * and is within the valid range, riocm_ch_create tries to allocate the
+ * specified ID for the new channel. If ch_num = 0, channel ID will be assigned
+ * automatically from the range (chstart ... RIOCM_MAX_CHNUM).
+ * Module parameter 'chstart' defines start of an ID range available for dynamic
+ * allocation. Range below 'chstart' is reserved for pre-defined ID numbers.
+ * Available channel numbers are limited by 16-bit size of channel numbers used
+ * in the packet header.
+ *
+ * Return value: PTR to rio_channel structure if successful (with channel number
+ * updated via pointer) or error-valued pointer if error.
+ */
+static struct rio_channel *riocm_ch_create(u16 *ch_num)
+{
+ struct rio_channel *ch = NULL;
+
+ ch = riocm_ch_alloc(*ch_num);
+
+ if (IS_ERR(ch))
+ riocm_debug(CHOP, "Failed to allocate channel %d (err=%ld)",
+ *ch_num, PTR_ERR(ch));
+ else
+ *ch_num = ch->id;
+
+ return ch;
+}
+
+/*
+ * riocm_ch_free - channel object release routine
+ * @ref: pointer to a channel's kref structure
+ */
+static void riocm_ch_free(struct kref *ref)
+{
+ struct rio_channel *ch = container_of(ref, struct rio_channel, ref);
+ int i;
+
+ riocm_debug(CHOP, "(ch_%d)", ch->id);
+
+ if (ch->rx_ring.inuse_cnt) {
+ for (i = 0;
+ i < RIOCM_RX_RING_SIZE && ch->rx_ring.inuse_cnt; i++) {
+ if (ch->rx_ring.inuse[i] != NULL) {
+ kfree(ch->rx_ring.inuse[i]);
+ ch->rx_ring.inuse_cnt--;
+ }
+ }
+ }
+
+ if (ch->rx_ring.count)
+ for (i = 0; i < RIOCM_RX_RING_SIZE && ch->rx_ring.count; i++) {
+ if (ch->rx_ring.buf[i] != NULL) {
+ kfree(ch->rx_ring.buf[i]);
+ ch->rx_ring.count--;
+ }
+ }
+
+ complete(&ch->comp_close);
+}
+
+static int riocm_send_close(struct rio_channel *ch)
+{
+ struct rio_ch_chan_hdr *hdr;
+ int ret;
+
+ /*
+ * Send CH_CLOSE notification to the remote RapidIO device
+ */
+
+ hdr = kzalloc(sizeof(*hdr), GFP_KERNEL);
+ if (hdr == NULL)
+ return -ENOMEM;
+
+ hdr->bhdr.src_id = htonl(ch->loc_destid);
+ hdr->bhdr.dst_id = htonl(ch->rem_destid);
+ hdr->bhdr.src_mbox = cmbox;
+ hdr->bhdr.dst_mbox = cmbox;
+ hdr->bhdr.type = RIO_CM_CHAN;
+ hdr->ch_op = CM_CONN_CLOSE;
+ hdr->dst_ch = htons(ch->rem_channel);
+ hdr->src_ch = htons(ch->id);
+
+ /* ATTN: the function call below relies on the fact that underlying
+ * add_outb_message() routine copies TX data into its internal transfer
+ * buffer. Needs to be reviewed if switched to direct buffer mode.
+ */
+ ret = riocm_post_send(ch->cmdev, ch->rdev, hdr, sizeof(*hdr));
+
+ if (ret == -EBUSY && !riocm_queue_req(ch->cmdev, ch->rdev,
+ hdr, sizeof(*hdr)))
+ return 0;
+ kfree(hdr);
+
+ if (ret)
+ riocm_error("ch(%d) send CLOSE failed (ret=%d)", ch->id, ret);
+
+ return ret;
+}
+
+/*
+ * riocm_ch_close - closes a channel object with specified ID (by local request)
+ * @ch: channel to be closed
+ */
+static int riocm_ch_close(struct rio_channel *ch)
+{
+ unsigned long tmo = msecs_to_jiffies(3000);
+ enum rio_cm_state state;
+ long wret;
+ int ret = 0;
+
+ riocm_debug(CHOP, "ch_%d by %s(%d)",
+ ch->id, current->comm, task_pid_nr(current));
+
+ state = riocm_exch(ch, RIO_CM_DESTROYING);
+ if (state == RIO_CM_CONNECTED)
+ riocm_send_close(ch);
+
+ complete_all(&ch->comp);
+
+ riocm_put_channel(ch);
+ wret = wait_for_completion_interruptible_timeout(&ch->comp_close, tmo);
+
+ riocm_debug(WAIT, "wait on %d returns %ld", ch->id, wret);
+
+ if (wret == 0) {
+ /* Timeout on wait occurred */
+ riocm_debug(CHOP, "%s(%d) timed out waiting for ch %d",
+ current->comm, task_pid_nr(current), ch->id);
+ ret = -ETIMEDOUT;
+ } else if (wret == -ERESTARTSYS) {
+ /* Wait_for_completion was interrupted by a signal */
+ riocm_debug(CHOP, "%s(%d) wait for ch %d was interrupted",
+ current->comm, task_pid_nr(current), ch->id);
+ ret = -EINTR;
+ }
+
+ if (!ret) {
+ riocm_debug(CHOP, "ch_%d resources released", ch->id);
+ kfree(ch);
+ } else {
+ riocm_debug(CHOP, "failed to release ch_%d resources", ch->id);
+ }
+
+ return ret;
+}
+
+/*
+ * riocm_cdev_open() - Open character device
+ */
+static int riocm_cdev_open(struct inode *inode, struct file *filp)
+{
+ riocm_debug(INIT, "by %s(%d) filp=%p ",
+ current->comm, task_pid_nr(current), filp);
+
+ if (list_empty(&cm_dev_list))
+ return -ENODEV;
+
+ return 0;
+}
+
+/*
+ * riocm_cdev_release() - Release character device
+ */
+static int riocm_cdev_release(struct inode *inode, struct file *filp)
+{
+ struct rio_channel *ch, *_c;
+ unsigned int i;
+ LIST_HEAD(list);
+
+ riocm_debug(EXIT, "by %s(%d) filp=%p",
+ current->comm, task_pid_nr(current), filp);
+
+ /* Check if there are channels associated with this file descriptor */
+ spin_lock_bh(&idr_lock);
+ idr_for_each_entry(&ch_idr, ch, i) {
+ if (ch && ch->filp == filp) {
+ riocm_debug(EXIT, "ch_%d not released by %s(%d)",
+ ch->id, current->comm,
+ task_pid_nr(current));
+ idr_remove(&ch_idr, ch->id);
+ list_add(&ch->ch_node, &list);
+ }
+ }
+ spin_unlock_bh(&idr_lock);
+
+ if (!list_empty(&list)) {
+ list_for_each_entry_safe(ch, _c, &list, ch_node) {
+ list_del(&ch->ch_node);
+ riocm_ch_close(ch);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * cm_ep_get_list_size() - Reports number of endpoints in the network
+ */
+static int cm_ep_get_list_size(void __user *arg)
+{
+ u32 __user *p = arg;
+ u32 mport_id;
+ u32 count = 0;
+ struct cm_dev *cm;
+
+ if (get_user(mport_id, p))
+ return -EFAULT;
+ if (mport_id >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ /* Find a matching cm_dev object */
+ down_read(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if (cm->mport->id == mport_id) {
+ count = cm->npeers;
+ up_read(&rdev_sem);
+ if (copy_to_user(arg, &count, sizeof(u32)))
+ return -EFAULT;
+ return 0;
+ }
+ }
+ up_read(&rdev_sem);
+
+ return -ENODEV;
+}
+
+/*
+ * cm_ep_get_list() - Returns list of attached endpoints
+ */
+static int cm_ep_get_list(void __user *arg)
+{
+ struct cm_dev *cm;
+ struct cm_peer *peer;
+ u32 info[2];
+ void *buf;
+ u32 nent;
+ u32 *entry_ptr;
+ u32 i = 0;
+ int ret = 0;
+
+ if (copy_from_user(&info, arg, sizeof(info)))
+ return -EFAULT;
+
+ if (info[1] >= RIO_MAX_MPORTS || info[0] > RIOCM_MAX_EP_COUNT)
+ return -EINVAL;
+
+ /* Find a matching cm_dev object */
+ down_read(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list)
+ if (cm->mport->id == (u8)info[1])
+ goto found;
+
+ up_read(&rdev_sem);
+ return -ENODEV;
+
+found:
+ nent = min(info[0], cm->npeers);
+ buf = kcalloc(nent + 2, sizeof(u32), GFP_KERNEL);
+ if (!buf) {
+ up_read(&rdev_sem);
+ return -ENOMEM;
+ }
+
+ entry_ptr = (u32 *)((uintptr_t)buf + 2*sizeof(u32));
+
+ list_for_each_entry(peer, &cm->peers, node) {
+ *entry_ptr = (u32)peer->rdev->destid;
+ entry_ptr++;
+ if (++i == nent)
+ break;
+ }
+ up_read(&rdev_sem);
+
+ ((u32 *)buf)[0] = i; /* report an updated number of entries */
+ ((u32 *)buf)[1] = info[1]; /* put back an mport ID */
+ if (copy_to_user(arg, buf, sizeof(u32) * (info[0] + 2)))
+ ret = -EFAULT;
+
+ kfree(buf);
+ return ret;
+}
+
+/*
+ * cm_mport_get_list() - Returns list of available local mport devices
+ */
+static int cm_mport_get_list(void __user *arg)
+{
+ int ret = 0;
+ u32 entries;
+ void *buf;
+ struct cm_dev *cm;
+ u32 *entry_ptr;
+ int count = 0;
+
+ if (copy_from_user(&entries, arg, sizeof(entries)))
+ return -EFAULT;
+ if (entries == 0 || entries > RIO_MAX_MPORTS)
+ return -EINVAL;
+ buf = kcalloc(entries + 1, sizeof(u32), GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* Scan all registered cm_dev objects */
+ entry_ptr = (u32 *)((uintptr_t)buf + sizeof(u32));
+ down_read(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if (count++ < entries) {
+ *entry_ptr = (cm->mport->id << 16) |
+ cm->mport->host_deviceid;
+ entry_ptr++;
+ }
+ }
+ up_read(&rdev_sem);
+
+ *((u32 *)buf) = count; /* report a real number of entries */
+ if (copy_to_user(arg, buf, sizeof(u32) * (count + 1)))
+ ret = -EFAULT;
+
+ kfree(buf);
+ return ret;
+}
+
+/*
+ * cm_chan_create() - Create a message exchange channel
+ */
+static int cm_chan_create(struct file *filp, void __user *arg)
+{
+ u16 __user *p = arg;
+ u16 ch_num;
+ struct rio_channel *ch;
+
+ if (get_user(ch_num, p))
+ return -EFAULT;
+
+ riocm_debug(CHOP, "ch_%d requested by %s(%d)",
+ ch_num, current->comm, task_pid_nr(current));
+ ch = riocm_ch_create(&ch_num);
+ if (IS_ERR(ch))
+ return PTR_ERR(ch);
+
+ ch->filp = filp;
+ riocm_debug(CHOP, "ch_%d created by %s(%d)",
+ ch_num, current->comm, task_pid_nr(current));
+ return put_user(ch_num, p);
+}
+
+/*
+ * cm_chan_close() - Close channel
+ * @filp: Pointer to file object
+ * @arg: Channel to close
+ */
+static int cm_chan_close(struct file *filp, void __user *arg)
+{
+ u16 __user *p = arg;
+ u16 ch_num;
+ struct rio_channel *ch;
+
+ if (get_user(ch_num, p))
+ return -EFAULT;
+
+ riocm_debug(CHOP, "ch_%d by %s(%d)",
+ ch_num, current->comm, task_pid_nr(current));
+
+ spin_lock_bh(&idr_lock);
+ ch = idr_find(&ch_idr, ch_num);
+ if (!ch) {
+ spin_unlock_bh(&idr_lock);
+ return 0;
+ }
+ if (ch->filp != filp) {
+ spin_unlock_bh(&idr_lock);
+ return -EINVAL;
+ }
+ idr_remove(&ch_idr, ch->id);
+ spin_unlock_bh(&idr_lock);
+
+ return riocm_ch_close(ch);
+}
+
+/*
+ * cm_chan_bind() - Bind channel
+ * @arg: Channel number
+ */
+static int cm_chan_bind(void __user *arg)
+{
+ struct rio_cm_channel chan;
+
+ if (copy_from_user(&chan, arg, sizeof(chan)))
+ return -EFAULT;
+ if (chan.mport_id >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ return riocm_ch_bind(chan.id, chan.mport_id, NULL);
+}
+
+/*
+ * cm_chan_listen() - Listen on channel
+ * @arg: Channel number
+ */
+static int cm_chan_listen(void __user *arg)
+{
+ u16 __user *p = arg;
+ u16 ch_num;
+
+ if (get_user(ch_num, p))
+ return -EFAULT;
+
+ return riocm_ch_listen(ch_num);
+}
+
+/*
+ * cm_chan_accept() - Accept incoming connection
+ * @filp: Pointer to file object
+ * @arg: Channel number
+ */
+static int cm_chan_accept(struct file *filp, void __user *arg)
+{
+ struct rio_cm_accept param;
+ long accept_to;
+ struct rio_channel *ch;
+
+ if (copy_from_user(&param, arg, sizeof(param)))
+ return -EFAULT;
+
+ riocm_debug(CHOP, "on ch_%d by %s(%d)",
+ param.ch_num, current->comm, task_pid_nr(current));
+
+ accept_to = param.wait_to ?
+ msecs_to_jiffies(param.wait_to) : 0;
+
+ ch = riocm_ch_accept(param.ch_num, &param.ch_num, accept_to);
+ if (IS_ERR(ch))
+ return PTR_ERR(ch);
+ ch->filp = filp;
+
+ riocm_debug(CHOP, "new ch_%d for %s(%d)",
+ ch->id, current->comm, task_pid_nr(current));
+
+ if (copy_to_user(arg, &param, sizeof(param)))
+ return -EFAULT;
+ return 0;
+}
+
+/*
+ * cm_chan_connect() - Connect on channel
+ * @arg: Channel information
+ */
+static int cm_chan_connect(void __user *arg)
+{
+ struct rio_cm_channel chan;
+ struct cm_dev *cm;
+ struct cm_peer *peer;
+ int ret = -ENODEV;
+
+ if (copy_from_user(&chan, arg, sizeof(chan)))
+ return -EFAULT;
+ if (chan.mport_id >= RIO_MAX_MPORTS)
+ return -EINVAL;
+
+ down_read(&rdev_sem);
+
+ /* Find matching cm_dev object */
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if (cm->mport->id == chan.mport_id) {
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret)
+ goto err_out;
+
+ if (chan.remote_destid >= RIO_ANY_DESTID(cm->mport->sys_size)) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ /* Find corresponding RapidIO endpoint device object */
+ ret = -ENODEV;
+
+ list_for_each_entry(peer, &cm->peers, node) {
+ if (peer->rdev->destid == chan.remote_destid) {
+ ret = 0;
+ break;
+ }
+ }
+
+ if (ret)
+ goto err_out;
+
+ up_read(&rdev_sem);
+
+ return riocm_ch_connect(chan.id, cm, peer, chan.remote_channel);
+err_out:
+ up_read(&rdev_sem);
+ return ret;
+}
+
+/*
+ * cm_chan_msg_send() - Send a message through channel
+ * @arg: Outbound message information
+ */
+static int cm_chan_msg_send(void __user *arg)
+{
+ struct rio_cm_msg msg;
+ void *buf;
+ int ret;
+
+ if (copy_from_user(&msg, arg, sizeof(msg)))
+ return -EFAULT;
+ if (msg.size > RIO_MAX_MSG_SIZE)
+ return -EINVAL;
+
+ buf = memdup_user((void __user *)(uintptr_t)msg.msg, msg.size);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ ret = riocm_ch_send(msg.ch_num, buf, msg.size);
+
+ kfree(buf);
+ return ret;
+}
+
+/*
+ * cm_chan_msg_rcv() - Receive a message through channel
+ * @arg: Inbound message information
+ */
+static int cm_chan_msg_rcv(void __user *arg)
+{
+ struct rio_cm_msg msg;
+ struct rio_channel *ch;
+ void *buf;
+ long rxto;
+ int ret = 0, msg_size;
+
+ if (copy_from_user(&msg, arg, sizeof(msg)))
+ return -EFAULT;
+
+ if (msg.ch_num == 0 || msg.size == 0)
+ return -EINVAL;
+
+ ch = riocm_get_channel(msg.ch_num);
+ if (!ch)
+ return -ENODEV;
+
+ rxto = msg.rxto ? msecs_to_jiffies(msg.rxto) : MAX_SCHEDULE_TIMEOUT;
+
+ ret = riocm_ch_receive(ch, &buf, rxto);
+ if (ret)
+ goto out;
+
+ msg_size = min(msg.size, (u16)(RIO_MAX_MSG_SIZE));
+
+ if (copy_to_user((void __user *)(uintptr_t)msg.msg, buf, msg_size))
+ ret = -EFAULT;
+
+ riocm_ch_free_rxbuf(ch, buf);
+out:
+ riocm_put_channel(ch);
+ return ret;
+}
+
+/*
+ * riocm_cdev_ioctl() - IOCTL requests handler
+ */
+static long
+riocm_cdev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case RIO_CM_EP_GET_LIST_SIZE:
+ return cm_ep_get_list_size((void __user *)arg);
+ case RIO_CM_EP_GET_LIST:
+ return cm_ep_get_list((void __user *)arg);
+ case RIO_CM_CHAN_CREATE:
+ return cm_chan_create(filp, (void __user *)arg);
+ case RIO_CM_CHAN_CLOSE:
+ return cm_chan_close(filp, (void __user *)arg);
+ case RIO_CM_CHAN_BIND:
+ return cm_chan_bind((void __user *)arg);
+ case RIO_CM_CHAN_LISTEN:
+ return cm_chan_listen((void __user *)arg);
+ case RIO_CM_CHAN_ACCEPT:
+ return cm_chan_accept(filp, (void __user *)arg);
+ case RIO_CM_CHAN_CONNECT:
+ return cm_chan_connect((void __user *)arg);
+ case RIO_CM_CHAN_SEND:
+ return cm_chan_msg_send((void __user *)arg);
+ case RIO_CM_CHAN_RECEIVE:
+ return cm_chan_msg_rcv((void __user *)arg);
+ case RIO_CM_MPORT_GET_LIST:
+ return cm_mport_get_list((void __user *)arg);
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static const struct file_operations riocm_cdev_fops = {
+ .owner = THIS_MODULE,
+ .open = riocm_cdev_open,
+ .release = riocm_cdev_release,
+ .unlocked_ioctl = riocm_cdev_ioctl,
+};
+
+/*
+ * riocm_add_dev - add new remote RapidIO device into channel management core
+ * @dev: device object associated with RapidIO device
+ * @sif: subsystem interface
+ *
+ * Adds the specified RapidIO device (if applicable) into peers list of
+ * the corresponding channel management device (cm_dev).
+ */
+static int riocm_add_dev(struct device *dev, struct subsys_interface *sif)
+{
+ struct cm_peer *peer;
+ struct rio_dev *rdev = to_rio_dev(dev);
+ struct cm_dev *cm;
+
+ /* Check if the remote device has capabilities required to support CM */
+ if (!dev_cm_capable(rdev))
+ return 0;
+
+ riocm_debug(RDEV, "(%s)", rio_name(rdev));
+
+ peer = kmalloc(sizeof(*peer), GFP_KERNEL);
+ if (!peer)
+ return -ENOMEM;
+
+ /* Find a corresponding cm_dev object */
+ down_write(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if (cm->mport == rdev->net->hport)
+ goto found;
+ }
+
+ up_write(&rdev_sem);
+ kfree(peer);
+ return -ENODEV;
+
+found:
+ peer->rdev = rdev;
+ list_add_tail(&peer->node, &cm->peers);
+ cm->npeers++;
+
+ up_write(&rdev_sem);
+ return 0;
+}
+
+/*
+ * riocm_remove_dev - remove remote RapidIO device from channel management core
+ * @dev: device object associated with RapidIO device
+ * @sif: subsystem interface
+ *
+ * Removes the specified RapidIO device (if applicable) from peers list of
+ * the corresponding channel management device (cm_dev).
+ */
+static void riocm_remove_dev(struct device *dev, struct subsys_interface *sif)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ struct cm_dev *cm;
+ struct cm_peer *peer;
+ struct rio_channel *ch, *_c;
+ unsigned int i;
+ bool found = false;
+ LIST_HEAD(list);
+
+ /* Check if the remote device has capabilities required to support CM */
+ if (!dev_cm_capable(rdev))
+ return;
+
+ riocm_debug(RDEV, "(%s)", rio_name(rdev));
+
+ /* Find matching cm_dev object */
+ down_write(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if (cm->mport == rdev->net->hport) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ up_write(&rdev_sem);
+ return;
+ }
+
+ /* Remove remote device from the list of peers */
+ found = false;
+ list_for_each_entry(peer, &cm->peers, node) {
+ if (peer->rdev == rdev) {
+ riocm_debug(RDEV, "removing peer %s", rio_name(rdev));
+ found = true;
+ list_del(&peer->node);
+ cm->npeers--;
+ kfree(peer);
+ break;
+ }
+ }
+
+ up_write(&rdev_sem);
+
+ if (!found)
+ return;
+
+ /*
+ * Release channels associated with this peer
+ */
+
+ spin_lock_bh(&idr_lock);
+ idr_for_each_entry(&ch_idr, ch, i) {
+ if (ch && ch->rdev == rdev) {
+ if (atomic_read(&rdev->state) != RIO_DEVICE_SHUTDOWN)
+ riocm_exch(ch, RIO_CM_DISCONNECT);
+ idr_remove(&ch_idr, ch->id);
+ list_add(&ch->ch_node, &list);
+ }
+ }
+ spin_unlock_bh(&idr_lock);
+
+ if (!list_empty(&list)) {
+ list_for_each_entry_safe(ch, _c, &list, ch_node) {
+ list_del(&ch->ch_node);
+ riocm_ch_close(ch);
+ }
+ }
+}
+
+/*
+ * riocm_cdev_add() - Create rio_cm char device
+ * @devno: device number assigned to device (MAJ + MIN)
+ */
+static int riocm_cdev_add(dev_t devno)
+{
+ int ret;
+
+ cdev_init(&riocm_cdev.cdev, &riocm_cdev_fops);
+ riocm_cdev.cdev.owner = THIS_MODULE;
+ ret = cdev_add(&riocm_cdev.cdev, devno, 1);
+ if (ret < 0) {
+ riocm_error("Cannot register a device with error %d", ret);
+ return ret;
+ }
+
+ riocm_cdev.dev = device_create(dev_class, NULL, devno, NULL, DEV_NAME);
+ if (IS_ERR(riocm_cdev.dev)) {
+ cdev_del(&riocm_cdev.cdev);
+ return PTR_ERR(riocm_cdev.dev);
+ }
+
+ riocm_debug(MPORT, "Added %s cdev(%d:%d)",
+ DEV_NAME, MAJOR(devno), MINOR(devno));
+
+ return 0;
+}
+
+/*
+ * riocm_add_mport - add new local mport device into channel management core
+ * @dev: device object associated with mport
+ * @class_intf: class interface
+ *
+ * When a new mport device is added, CM immediately reserves inbound and
+ * outbound RapidIO mailboxes that will be used.
+ */
+static int riocm_add_mport(struct device *dev,
+ struct class_interface *class_intf)
+{
+ int rc;
+ int i;
+ struct cm_dev *cm;
+ struct rio_mport *mport = to_rio_mport(dev);
+
+ riocm_debug(MPORT, "add mport %s", mport->name);
+
+ cm = kzalloc(sizeof(*cm), GFP_KERNEL);
+ if (!cm)
+ return -ENOMEM;
+
+ cm->mport = mport;
+
+ rc = rio_request_outb_mbox(mport, cm, cmbox,
+ RIOCM_TX_RING_SIZE, riocm_outb_msg_event);
+ if (rc) {
+ riocm_error("failed to allocate OBMBOX_%d on %s",
+ cmbox, mport->name);
+ kfree(cm);
+ return -ENODEV;
+ }
+
+ rc = rio_request_inb_mbox(mport, cm, cmbox,
+ RIOCM_RX_RING_SIZE, riocm_inb_msg_event);
+ if (rc) {
+ riocm_error("failed to allocate IBMBOX_%d on %s",
+ cmbox, mport->name);
+ rio_release_outb_mbox(mport, cmbox);
+ kfree(cm);
+ return -ENODEV;
+ }
+
+ cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+ if (!cm->rx_wq) {
+ rio_release_inb_mbox(mport, cmbox);
+ rio_release_outb_mbox(mport, cmbox);
+ kfree(cm);
+ return -ENOMEM;
+ }
+
+ /*
+ * Allocate and register inbound messaging buffers to be ready
+ * to receive channel and system management requests
+ */
+ for (i = 0; i < RIOCM_RX_RING_SIZE; i++)
+ cm->rx_buf[i] = NULL;
+
+ cm->rx_slots = RIOCM_RX_RING_SIZE;
+ mutex_init(&cm->rx_lock);
+ riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
+ INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
+
+ cm->tx_slot = 0;
+ cm->tx_cnt = 0;
+ cm->tx_ack_slot = 0;
+ spin_lock_init(&cm->tx_lock);
+
+ INIT_LIST_HEAD(&cm->peers);
+ cm->npeers = 0;
+ INIT_LIST_HEAD(&cm->tx_reqs);
+
+ down_write(&rdev_sem);
+ list_add_tail(&cm->list, &cm_dev_list);
+ up_write(&rdev_sem);
+
+ return 0;
+}
+
+/*
+ * riocm_remove_mport - remove local mport device from channel management core
+ * @dev: device object associated with mport
+ * @class_intf: class interface
+ *
+ * Removes a local mport device from the list of registered devices that provide
+ * channel management services. Returns an error if the specified mport is not
+ * registered with the CM core.
+ */
+static void riocm_remove_mport(struct device *dev,
+ struct class_interface *class_intf)
+{
+ struct rio_mport *mport = to_rio_mport(dev);
+ struct cm_dev *cm;
+ struct cm_peer *peer, *temp;
+ struct rio_channel *ch, *_c;
+ unsigned int i;
+ bool found = false;
+ LIST_HEAD(list);
+
+ riocm_debug(MPORT, "%s", mport->name);
+
+ /* Find a matching cm_dev object */
+ down_write(&rdev_sem);
+ list_for_each_entry(cm, &cm_dev_list, list) {
+ if (cm->mport == mport) {
+ list_del(&cm->list);
+ found = true;
+ break;
+ }
+ }
+ up_write(&rdev_sem);
+ if (!found)
+ return;
+
+ flush_workqueue(cm->rx_wq);
+ destroy_workqueue(cm->rx_wq);
+
+ /* Release channels bound to this mport */
+ spin_lock_bh(&idr_lock);
+ idr_for_each_entry(&ch_idr, ch, i) {
+ if (ch->cmdev == cm) {
+ riocm_debug(RDEV, "%s drop ch_%d",
+ mport->name, ch->id);
+ idr_remove(&ch_idr, ch->id);
+ list_add(&ch->ch_node, &list);
+ }
+ }
+ spin_unlock_bh(&idr_lock);
+
+ if (!list_empty(&list)) {
+ list_for_each_entry_safe(ch, _c, &list, ch_node) {
+ list_del(&ch->ch_node);
+ riocm_ch_close(ch);
+ }
+ }
+
+ rio_release_inb_mbox(mport, cmbox);
+ rio_release_outb_mbox(mport, cmbox);
+
+ /* Remove and free peer entries */
+ if (!list_empty(&cm->peers))
+ riocm_debug(RDEV, "ATTN: peer list not empty");
+ list_for_each_entry_safe(peer, temp, &cm->peers, node) {
+ riocm_debug(RDEV, "removing peer %s", rio_name(peer->rdev));
+ list_del(&peer->node);
+ kfree(peer);
+ }
+
+ riocm_rx_free(cm);
+ kfree(cm);
+ riocm_debug(MPORT, "%s done", mport->name);
+}
+
+static int rio_cm_shutdown(struct notifier_block *nb, unsigned long code,
+ void *unused)
+{
+ struct rio_channel *ch;
+ unsigned int i;
+ LIST_HEAD(list);
+
+ riocm_debug(EXIT, ".");
+
+ /*
+ * If there are any channels left in connected state send
+ * close notification to the connection partner.
+ * First build a list of channels that require a closing
+ * notification because function riocm_send_close() should
+ * be called outside of spinlock protected code.
+ */
+ spin_lock_bh(&idr_lock);
+ idr_for_each_entry(&ch_idr, ch, i) {
+ if (ch->state == RIO_CM_CONNECTED) {
+ riocm_debug(EXIT, "close ch %d", ch->id);
+ idr_remove(&ch_idr, ch->id);
+ list_add(&ch->ch_node, &list);
+ }
+ }
+ spin_unlock_bh(&idr_lock);
+
+ list_for_each_entry(ch, &list, ch_node)
+ riocm_send_close(ch);
+
+ return NOTIFY_DONE;
+}
+
+/*
+ * riocm_interface handles addition/removal of remote RapidIO devices
+ */
+static struct subsys_interface riocm_interface = {
+ .name = "rio_cm",
+ .subsys = &rio_bus_type,
+ .add_dev = riocm_add_dev,
+ .remove_dev = riocm_remove_dev,
+};
+
+/*
+ * rio_mport_interface handles addition/removal local mport devices
+ */
+static struct class_interface rio_mport_interface __refdata = {
+ .class = &rio_mport_class,
+ .add_dev = riocm_add_mport,
+ .remove_dev = riocm_remove_mport,
+};
+
+static struct notifier_block rio_cm_notifier = {
+ .notifier_call = rio_cm_shutdown,
+};
+
+static int __init riocm_init(void)
+{
+ int ret;
+
+ /* Create device class needed by udev */
+ dev_class = class_create(THIS_MODULE, DRV_NAME);
+ if (IS_ERR(dev_class)) {
+ riocm_error("Cannot create " DRV_NAME " class");
+ return PTR_ERR(dev_class);
+ }
+
+ ret = alloc_chrdev_region(&dev_number, 0, 1, DRV_NAME);
+ if (ret) {
+ class_destroy(dev_class);
+ return ret;
+ }
+
+ dev_major = MAJOR(dev_number);
+ dev_minor_base = MINOR(dev_number);
+ riocm_debug(INIT, "Registered class with %d major", dev_major);
+
+ /*
+ * Register as rapidio_port class interface to get notifications about
+ * mport additions and removals.
+ */
+ ret = class_interface_register(&rio_mport_interface);
+ if (ret) {
+ riocm_error("class_interface_register error: %d", ret);
+ goto err_reg;
+ }
+
+ /*
+ * Register as RapidIO bus interface to get notifications about
+ * addition/removal of remote RapidIO devices.
+ */
+ ret = subsys_interface_register(&riocm_interface);
+ if (ret) {
+ riocm_error("subsys_interface_register error: %d", ret);
+ goto err_cl;
+ }
+
+ ret = register_reboot_notifier(&rio_cm_notifier);
+ if (ret) {
+ riocm_error("failed to register reboot notifier (err=%d)", ret);
+ goto err_sif;
+ }
+
+ ret = riocm_cdev_add(dev_number);
+ if (ret) {
+ unregister_reboot_notifier(&rio_cm_notifier);
+ ret = -ENODEV;
+ goto err_sif;
+ }
+
+ return 0;
+err_sif:
+ subsys_interface_unregister(&riocm_interface);
+err_cl:
+ class_interface_unregister(&rio_mport_interface);
+err_reg:
+ unregister_chrdev_region(dev_number, 1);
+ class_destroy(dev_class);
+ return ret;
+}
+
+static void __exit riocm_exit(void)
+{
+ riocm_debug(EXIT, "enter");
+ unregister_reboot_notifier(&rio_cm_notifier);
+ subsys_interface_unregister(&riocm_interface);
+ class_interface_unregister(&rio_mport_interface);
+ idr_destroy(&ch_idr);
+
+ device_unregister(riocm_cdev.dev);
+ cdev_del(&(riocm_cdev.cdev));
+
+ class_destroy(dev_class);
+ unregister_chrdev_region(dev_number, 1);
+}
+
+late_initcall(riocm_init);
+module_exit(riocm_exit);
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
new file mode 100644
index 000000000..02771ba3e
--- /dev/null
+++ b/drivers/rapidio/switches/Kconfig
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# RapidIO switches configuration
+#
+config RAPIDIO_CPS_XX
+ tristate "IDT CPS-xx SRIO switches support"
+ help
+ Includes support for IDT CPS-16/12/10/8 serial RapidIO switches.
+
+config RAPIDIO_CPS_GEN2
+ tristate "IDT CPS Gen.2 SRIO switch support"
+ default n
+ help
+ Includes support for ITD CPS Gen.2 serial RapidIO switches.
+
+config RAPIDIO_RXS_GEN3
+ tristate "IDT RXS Gen.3 SRIO switch support"
+ default n
+ help
+ Includes support for ITD RXS Gen.3 serial RapidIO switches.
diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile
new file mode 100644
index 000000000..ef1749a79
--- /dev/null
+++ b/drivers/rapidio/switches/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for RIO switches
+#
+
+obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
+obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o
+obj-$(CONFIG_RAPIDIO_RXS_GEN3) += idt_gen3.o
diff --git a/drivers/rapidio/switches/idt_gen2.c b/drivers/rapidio/switches/idt_gen2.c
new file mode 100644
index 000000000..8a89bba17
--- /dev/null
+++ b/drivers/rapidio/switches/idt_gen2.c
@@ -0,0 +1,490 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IDT CPS Gen.2 Serial RapidIO switch family support
+ *
+ * Copyright 2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ */
+
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+
+#include <asm/page.h>
+#include "../rio.h"
+
+#define LOCAL_RTE_CONF_DESTID_SEL 0x010070
+#define LOCAL_RTE_CONF_DESTID_SEL_PSEL 0x0000001f
+
+#define IDT_LT_ERR_REPORT_EN 0x03100c
+
+#define IDT_PORT_ERR_REPORT_EN(n) (0x031044 + (n)*0x40)
+#define IDT_PORT_ERR_REPORT_EN_BC 0x03ff04
+
+#define IDT_PORT_ISERR_REPORT_EN(n) (0x03104C + (n)*0x40)
+#define IDT_PORT_ISERR_REPORT_EN_BC 0x03ff0c
+#define IDT_PORT_INIT_TX_ACQUIRED 0x00000020
+
+#define IDT_LANE_ERR_REPORT_EN(n) (0x038010 + (n)*0x100)
+#define IDT_LANE_ERR_REPORT_EN_BC 0x03ff10
+
+#define IDT_DEV_CTRL_1 0xf2000c
+#define IDT_DEV_CTRL_1_GENPW 0x02000000
+#define IDT_DEV_CTRL_1_PRSTBEH 0x00000001
+
+#define IDT_CFGBLK_ERR_CAPTURE_EN 0x020008
+#define IDT_CFGBLK_ERR_REPORT 0xf20014
+#define IDT_CFGBLK_ERR_REPORT_GENPW 0x00000002
+
+#define IDT_AUX_PORT_ERR_CAP_EN 0x020000
+#define IDT_AUX_ERR_REPORT_EN 0xf20018
+#define IDT_AUX_PORT_ERR_LOG_I2C 0x00000002
+#define IDT_AUX_PORT_ERR_LOG_JTAG 0x00000001
+
+#define IDT_ISLTL_ADDRESS_CAP 0x021014
+
+#define IDT_RIO_DOMAIN 0xf20020
+#define IDT_RIO_DOMAIN_MASK 0x000000ff
+
+#define IDT_PW_INFO_CSR 0xf20024
+
+#define IDT_SOFT_RESET 0xf20040
+#define IDT_SOFT_RESET_REQ 0x00030097
+
+#define IDT_I2C_MCTRL 0xf20050
+#define IDT_I2C_MCTRL_GENPW 0x04000000
+
+#define IDT_JTAG_CTRL 0xf2005c
+#define IDT_JTAG_CTRL_GENPW 0x00000002
+
+#define IDT_LANE_CTRL(n) (0xff8000 + (n)*0x100)
+#define IDT_LANE_CTRL_BC 0xffff00
+#define IDT_LANE_CTRL_GENPW 0x00200000
+#define IDT_LANE_DFE_1_BC 0xffff18
+#define IDT_LANE_DFE_2_BC 0xffff1c
+
+#define IDT_PORT_OPS(n) (0xf40004 + (n)*0x100)
+#define IDT_PORT_OPS_GENPW 0x08000000
+#define IDT_PORT_OPS_PL_ELOG 0x00000040
+#define IDT_PORT_OPS_LL_ELOG 0x00000020
+#define IDT_PORT_OPS_LT_ELOG 0x00000010
+#define IDT_PORT_OPS_BC 0xf4ff04
+
+#define IDT_PORT_ISERR_DET(n) (0xf40008 + (n)*0x100)
+
+#define IDT_ERR_CAP 0xfd0000
+#define IDT_ERR_CAP_LOG_OVERWR 0x00000004
+
+#define IDT_ERR_RD 0xfd0004
+
+#define IDT_DEFAULT_ROUTE 0xde
+#define IDT_NO_ROUTE 0xdf
+
+static int
+idtg2_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ /*
+ * Select routing table to update
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = 0;
+ else
+ table++;
+
+ if (route_port == RIO_INVALID_ROUTE)
+ route_port = IDT_DEFAULT_ROUTE;
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ LOCAL_RTE_CONF_DESTID_SEL, table);
+
+ /*
+ * Program destination port for the specified destID
+ */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ (u32)route_destid);
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (u32)route_port);
+ udelay(10);
+
+ return 0;
+}
+
+static int
+idtg2_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ /*
+ * Select routing table to read
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = 0;
+ else
+ table++;
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ LOCAL_RTE_CONF_DESTID_SEL, table);
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ if (IDT_DEFAULT_ROUTE == (u8)result || IDT_NO_ROUTE == (u8)result)
+ *route_port = RIO_INVALID_ROUTE;
+ else
+ *route_port = (u8)result;
+
+ return 0;
+}
+
+static int
+idtg2_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+
+ /*
+ * Select routing table to read
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = 0;
+ else
+ table++;
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ LOCAL_RTE_CONF_DESTID_SEL, table);
+
+ for (i = RIO_STD_RTE_CONF_EXTCFGEN;
+ i <= (RIO_STD_RTE_CONF_EXTCFGEN | 0xff);) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (IDT_DEFAULT_ROUTE << 24) | (IDT_DEFAULT_ROUTE << 16) |
+ (IDT_DEFAULT_ROUTE << 8) | IDT_DEFAULT_ROUTE);
+ i += 4;
+ }
+
+ return 0;
+}
+
+
+static int
+idtg2_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 sw_domain)
+{
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDT_RIO_DOMAIN, (u32)sw_domain);
+ return 0;
+}
+
+static int
+idtg2_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 *sw_domain)
+{
+ u32 regval;
+
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDT_RIO_DOMAIN, &regval);
+
+ *sw_domain = (u8)(regval & 0xff);
+
+ return 0;
+}
+
+static int
+idtg2_em_init(struct rio_dev *rdev)
+{
+ u32 regval;
+ int i, tmp;
+
+ /*
+ * This routine performs device-specific initialization only.
+ * All standard EM configuration should be performed at upper level.
+ */
+
+ pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+ /* Set Port-Write info CSR: PRIO=3 and CRF=1 */
+ rio_write_config_32(rdev, IDT_PW_INFO_CSR, 0x0000e000);
+
+ /*
+ * Configure LT LAYER error reporting.
+ */
+
+ /* Enable standard (RIO.p8) error reporting */
+ rio_write_config_32(rdev, IDT_LT_ERR_REPORT_EN,
+ REM_LTL_ERR_ILLTRAN | REM_LTL_ERR_UNSOLR |
+ REM_LTL_ERR_UNSUPTR);
+
+ /* Use Port-Writes for LT layer error reporting.
+ * Enable per-port reset
+ */
+ rio_read_config_32(rdev, IDT_DEV_CTRL_1, &regval);
+ rio_write_config_32(rdev, IDT_DEV_CTRL_1,
+ regval | IDT_DEV_CTRL_1_GENPW | IDT_DEV_CTRL_1_PRSTBEH);
+
+ /*
+ * Configure PORT error reporting.
+ */
+
+ /* Report all RIO.p8 errors supported by device */
+ rio_write_config_32(rdev, IDT_PORT_ERR_REPORT_EN_BC, 0x807e8037);
+
+ /* Configure reporting of implementation specific errors/events */
+ rio_write_config_32(rdev, IDT_PORT_ISERR_REPORT_EN_BC,
+ IDT_PORT_INIT_TX_ACQUIRED);
+
+ /* Use Port-Writes for port error reporting and enable error logging */
+ tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+ for (i = 0; i < tmp; i++) {
+ rio_read_config_32(rdev, IDT_PORT_OPS(i), &regval);
+ rio_write_config_32(rdev,
+ IDT_PORT_OPS(i), regval | IDT_PORT_OPS_GENPW |
+ IDT_PORT_OPS_PL_ELOG |
+ IDT_PORT_OPS_LL_ELOG |
+ IDT_PORT_OPS_LT_ELOG);
+ }
+ /* Overwrite error log if full */
+ rio_write_config_32(rdev, IDT_ERR_CAP, IDT_ERR_CAP_LOG_OVERWR);
+
+ /*
+ * Configure LANE error reporting.
+ */
+
+ /* Disable line error reporting */
+ rio_write_config_32(rdev, IDT_LANE_ERR_REPORT_EN_BC, 0);
+
+ /* Use Port-Writes for lane error reporting (when enabled)
+ * (do per-lane update because lanes may have different configuration)
+ */
+ tmp = (rdev->did == RIO_DID_IDTCPS1848) ? 48 : 16;
+ for (i = 0; i < tmp; i++) {
+ rio_read_config_32(rdev, IDT_LANE_CTRL(i), &regval);
+ rio_write_config_32(rdev, IDT_LANE_CTRL(i),
+ regval | IDT_LANE_CTRL_GENPW);
+ }
+
+ /*
+ * Configure AUX error reporting.
+ */
+
+ /* Disable JTAG and I2C Error capture */
+ rio_write_config_32(rdev, IDT_AUX_PORT_ERR_CAP_EN, 0);
+
+ /* Disable JTAG and I2C Error reporting/logging */
+ rio_write_config_32(rdev, IDT_AUX_ERR_REPORT_EN, 0);
+
+ /* Disable Port-Write notification from JTAG */
+ rio_write_config_32(rdev, IDT_JTAG_CTRL, 0);
+
+ /* Disable Port-Write notification from I2C */
+ rio_read_config_32(rdev, IDT_I2C_MCTRL, &regval);
+ rio_write_config_32(rdev, IDT_I2C_MCTRL, regval & ~IDT_I2C_MCTRL_GENPW);
+
+ /*
+ * Configure CFG_BLK error reporting.
+ */
+
+ /* Disable Configuration Block error capture */
+ rio_write_config_32(rdev, IDT_CFGBLK_ERR_CAPTURE_EN, 0);
+
+ /* Disable Port-Writes for Configuration Block error reporting */
+ rio_read_config_32(rdev, IDT_CFGBLK_ERR_REPORT, &regval);
+ rio_write_config_32(rdev, IDT_CFGBLK_ERR_REPORT,
+ regval & ~IDT_CFGBLK_ERR_REPORT_GENPW);
+
+ /* set TVAL = ~50us */
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+
+ return 0;
+}
+
+static int
+idtg2_em_handler(struct rio_dev *rdev, u8 portnum)
+{
+ u32 regval, em_perrdet, em_ltlerrdet;
+
+ rio_read_config_32(rdev,
+ rdev->em_efptr + RIO_EM_LTL_ERR_DETECT, &em_ltlerrdet);
+ if (em_ltlerrdet) {
+ /* Service Logical/Transport Layer Error(s) */
+ if (em_ltlerrdet & REM_LTL_ERR_IMPSPEC) {
+ /* Implementation specific error reported */
+ rio_read_config_32(rdev,
+ IDT_ISLTL_ADDRESS_CAP, &regval);
+
+ pr_debug("RIO: %s Implementation Specific LTL errors" \
+ " 0x%x @(0x%x)\n",
+ rio_name(rdev), em_ltlerrdet, regval);
+
+ /* Clear implementation specific address capture CSR */
+ rio_write_config_32(rdev, IDT_ISLTL_ADDRESS_CAP, 0);
+
+ }
+ }
+
+ rio_read_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(portnum), &em_perrdet);
+ if (em_perrdet) {
+ /* Service Port-Level Error(s) */
+ if (em_perrdet & REM_PED_IMPL_SPEC) {
+ /* Implementation Specific port error reported */
+
+ /* Get IS errors reported */
+ rio_read_config_32(rdev,
+ IDT_PORT_ISERR_DET(portnum), &regval);
+
+ pr_debug("RIO: %s Implementation Specific Port" \
+ " errors 0x%x\n", rio_name(rdev), regval);
+
+ /* Clear all implementation specific events */
+ rio_write_config_32(rdev,
+ IDT_PORT_ISERR_DET(portnum), 0);
+ }
+ }
+
+ return 0;
+}
+
+static ssize_t
+idtg2_show_errlog(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct rio_dev *rdev = to_rio_dev(dev);
+ ssize_t len = 0;
+ u32 regval;
+
+ while (!rio_read_config_32(rdev, IDT_ERR_RD, &regval)) {
+ if (!regval) /* 0 = end of log */
+ break;
+ len += snprintf(buf + len, PAGE_SIZE - len,
+ "%08x\n", regval);
+ if (len >= (PAGE_SIZE - 10))
+ break;
+ }
+
+ return len;
+}
+
+static DEVICE_ATTR(errlog, S_IRUGO, idtg2_show_errlog, NULL);
+
+static int idtg2_sysfs(struct rio_dev *rdev, bool create)
+{
+ struct device *dev = &rdev->dev;
+ int err = 0;
+
+ if (create) {
+ /* Initialize sysfs entries */
+ err = device_create_file(dev, &dev_attr_errlog);
+ if (err)
+ dev_err(dev, "Unable create sysfs errlog file\n");
+ } else
+ device_remove_file(dev, &dev_attr_errlog);
+
+ return err;
+}
+
+static struct rio_switch_ops idtg2_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = idtg2_route_add_entry,
+ .get_entry = idtg2_route_get_entry,
+ .clr_table = idtg2_route_clr_table,
+ .set_domain = idtg2_set_domain,
+ .get_domain = idtg2_get_domain,
+ .em_init = idtg2_em_init,
+ .em_handle = idtg2_em_handler,
+};
+
+static int idtg2_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &idtg2_switch_ops;
+
+ if (rdev->do_enum) {
+ /* Ensure that default routing is disabled on startup */
+ rio_write_config_32(rdev,
+ RIO_STD_RTE_DEFAULT_PORT, IDT_NO_ROUTE);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ /* Create device-specific sysfs attributes */
+ idtg2_sysfs(rdev, true);
+
+ return 0;
+}
+
+static void idtg2_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops != &idtg2_switch_ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return;
+ }
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+ /* Remove device-specific sysfs attributes */
+ idtg2_sysfs(rdev, false);
+}
+
+static const struct rio_device_id idtg2_id_table[] = {
+ {RIO_DEVICE(RIO_DID_IDTCPS1848, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS1616, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTVPS1616, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTSPS1616, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS1432, RIO_VID_IDT)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver idtg2_driver = {
+ .name = "idt_gen2",
+ .id_table = idtg2_id_table,
+ .probe = idtg2_probe,
+ .remove = idtg2_remove,
+};
+
+static int __init idtg2_init(void)
+{
+ return rio_register_driver(&idtg2_driver);
+}
+
+static void __exit idtg2_exit(void)
+{
+ pr_debug("RIO: %s\n", __func__);
+ rio_unregister_driver(&idtg2_driver);
+ pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg2_init);
+module_exit(idtg2_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.2 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/switches/idt_gen3.c b/drivers/rapidio/switches/idt_gen3.c
new file mode 100644
index 000000000..d7537e621
--- /dev/null
+++ b/drivers/rapidio/switches/idt_gen3.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IDT RXS Gen.3 Serial RapidIO switch family support
+ *
+ * Copyright 2016 Integrated Device Technology, Inc.
+ */
+
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+
+#include <asm/page.h>
+#include "../rio.h"
+
+#define RIO_EM_PW_STAT 0x40020
+#define RIO_PW_CTL 0x40204
+#define RIO_PW_CTL_PW_TMR 0xffffff00
+#define RIO_PW_ROUTE 0x40208
+
+#define RIO_EM_DEV_INT_EN 0x40030
+
+#define RIO_PLM_SPx_IMP_SPEC_CTL(x) (0x10100 + (x)*0x100)
+#define RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST 0x02000000
+
+#define RIO_PLM_SPx_PW_EN(x) (0x10118 + (x)*0x100)
+#define RIO_PLM_SPx_PW_EN_OK2U 0x40000000
+#define RIO_PLM_SPx_PW_EN_LINIT 0x10000000
+
+#define RIO_BC_L2_Gn_ENTRYx_CSR(n, x) (0x31000 + (n)*0x400 + (x)*0x4)
+#define RIO_SPx_L2_Gn_ENTRYy_CSR(x, n, y) \
+ (0x51000 + (x)*0x2000 + (n)*0x400 + (y)*0x4)
+
+static int
+idtg3_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ u32 rval;
+ u32 entry = route_port;
+ int err = 0;
+
+ pr_debug("RIO: %s t=0x%x did_%x to p_%x\n",
+ __func__, table, route_destid, entry);
+
+ if (route_destid > 0xFF)
+ return -EINVAL;
+
+ if (route_port == RIO_INVALID_ROUTE)
+ entry = RIO_RT_ENTRY_DROP_PKT;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ /* Use broadcast register to update all per-port tables */
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_BC_L2_Gn_ENTRYx_CSR(0, route_destid),
+ entry);
+ return err;
+ }
+
+ /*
+ * Verify that specified port/table number is valid
+ */
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rval);
+ if (err)
+ return err;
+
+ if (table >= RIO_GET_TOTAL_PORTS(rval))
+ return -EINVAL;
+
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
+ entry);
+ return err;
+}
+
+static int
+idtg3_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 rval;
+ int err;
+
+ if (route_destid > 0xFF)
+ return -EINVAL;
+
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rval);
+ if (err)
+ return err;
+
+ /*
+ * This switch device does not have the dedicated global routing table.
+ * It is substituted by reading routing table of the ingress port of
+ * maintenance read requests.
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = RIO_GET_PORT_NUM(rval);
+ else if (table >= RIO_GET_TOTAL_PORTS(rval))
+ return -EINVAL;
+
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
+ &rval);
+ if (err)
+ return err;
+
+ if (rval == RIO_RT_ENTRY_DROP_PKT)
+ *route_port = RIO_INVALID_ROUTE;
+ else
+ *route_port = (u8)rval;
+
+ return 0;
+}
+
+static int
+idtg3_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+ u32 rval;
+ int err;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ for (i = 0; i <= 0xff; i++) {
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_BC_L2_Gn_ENTRYx_CSR(0, i),
+ RIO_RT_ENTRY_DROP_PKT);
+ if (err)
+ break;
+ }
+
+ return err;
+ }
+
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rval);
+ if (err)
+ return err;
+
+ if (table >= RIO_GET_TOTAL_PORTS(rval))
+ return -EINVAL;
+
+ for (i = 0; i <= 0xff; i++) {
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, i),
+ RIO_RT_ENTRY_DROP_PKT);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+/*
+ * This routine performs device-specific initialization only.
+ * All standard EM configuration should be performed at upper level.
+ */
+static int
+idtg3_em_init(struct rio_dev *rdev)
+{
+ int i, tmp;
+ u32 rval;
+
+ pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+ /* Disable assertion of interrupt signal */
+ rio_write_config_32(rdev, RIO_EM_DEV_INT_EN, 0);
+
+ /* Disable port-write event notifications during initialization */
+ rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL,
+ RIO_EM_PW_TX_CTRL_PW_DIS);
+
+ /* Configure Port-Write notifications for hot-swap events */
+ tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+ for (i = 0; i < tmp; i++) {
+
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, i),
+ &rval);
+ if (rval & RIO_PORT_N_ERR_STS_PORT_UA)
+ continue;
+
+ /* Clear events signaled before enabling notification */
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(i), 0);
+
+ /* Enable event notifications */
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERRRATE_EN(i),
+ RIO_EM_PN_ERRRATE_EN_OK2U | RIO_EM_PN_ERRRATE_EN_U2OK);
+ /* Enable port-write generation on events */
+ rio_write_config_32(rdev, RIO_PLM_SPx_PW_EN(i),
+ RIO_PLM_SPx_PW_EN_OK2U | RIO_PLM_SPx_PW_EN_LINIT);
+
+ }
+
+ /* Set Port-Write destination port */
+ tmp = RIO_GET_PORT_NUM(rdev->swpinfo);
+ rio_write_config_32(rdev, RIO_PW_ROUTE, 1 << tmp);
+
+
+ /* Enable sending port-write event notifications */
+ rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
+
+ /* set TVAL = ~50us */
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+ return 0;
+}
+
+
+/*
+ * idtg3_em_handler - device-specific error handler
+ *
+ * If the link is down (PORT_UNINIT) does nothing - this is considered
+ * as link partner removal from the port.
+ *
+ * If the link is up (PORT_OK) - situation is handled as *new* device insertion.
+ * In this case ERR_STOP bits are cleared by issuing soft reset command to the
+ * reporting port. Inbound and outbound ackIDs are cleared by the reset as well.
+ * This way the port is synchronized with freshly inserted device (assuming it
+ * was reset/powered-up on insertion).
+ *
+ * TODO: This is not sufficient in a situation when a link between two devices
+ * was down and up again (e.g. cable disconnect). For that situation full ackID
+ * realignment process has to be implemented.
+ */
+static int
+idtg3_em_handler(struct rio_dev *rdev, u8 pnum)
+{
+ u32 err_status;
+ u32 rval;
+
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
+
+ /* Do nothing for device/link removal */
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT)
+ return 0;
+
+ /* When link is OK we have a device insertion.
+ * Request port soft reset to clear errors if they present.
+ * Inbound and outbound ackIDs will be 0 after reset.
+ */
+ if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) {
+ rio_read_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), &rval);
+ rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum),
+ rval | RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST);
+ udelay(10);
+ rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), rval);
+ msleep(500);
+ }
+
+ return 0;
+}
+
+static struct rio_switch_ops idtg3_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = idtg3_route_add_entry,
+ .get_entry = idtg3_route_get_entry,
+ .clr_table = idtg3_route_clr_table,
+ .em_init = idtg3_em_init,
+ .em_handle = idtg3_em_handler,
+};
+
+static int idtg3_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &idtg3_switch_ops;
+
+ if (rdev->do_enum) {
+ /* Disable hierarchical routing support: Existing fabric
+ * enumeration/discovery process (see rio-scan.c) uses 8-bit
+ * flat destination ID routing only.
+ */
+ rio_write_config_32(rdev, 0x5000 + RIO_BC_RT_CTL_CSR, 0);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ return 0;
+}
+
+static void idtg3_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops == &idtg3_switch_ops)
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+/*
+ * Gen3 switches repeat sending PW messages until a corresponding event flag
+ * is cleared. Use shutdown notification to disable generation of port-write
+ * messages if their destination node is shut down.
+ */
+static void idtg3_shutdown(struct rio_dev *rdev)
+{
+ int i;
+ u32 rval;
+ u16 destid;
+
+ /* Currently the enumerator node acts also as PW handler */
+ if (!rdev->do_enum)
+ return;
+
+ pr_debug("RIO: %s(%s)\n", __func__, rio_name(rdev));
+
+ rio_read_config_32(rdev, RIO_PW_ROUTE, &rval);
+ i = RIO_GET_PORT_NUM(rdev->swpinfo);
+
+ /* Check port-write destination port */
+ if (!((1 << i) & rval))
+ return;
+
+ /* Disable sending port-write event notifications if PW destID
+ * matches to one of the enumerator node
+ */
+ rio_read_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TGT_DEVID, &rval);
+
+ if (rval & RIO_EM_PW_TGT_DEVID_DEV16)
+ destid = rval >> 16;
+ else
+ destid = ((rval & RIO_EM_PW_TGT_DEVID_D8) >> 16);
+
+ if (rdev->net->hport->host_deviceid == destid) {
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
+ pr_debug("RIO: %s(%s) PW transmission disabled\n",
+ __func__, rio_name(rdev));
+ }
+}
+
+static const struct rio_device_id idtg3_id_table[] = {
+ {RIO_DEVICE(RIO_DID_IDTRXS1632, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTRXS2448, RIO_VID_IDT)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver idtg3_driver = {
+ .name = "idt_gen3",
+ .id_table = idtg3_id_table,
+ .probe = idtg3_probe,
+ .remove = idtg3_remove,
+ .shutdown = idtg3_shutdown,
+};
+
+static int __init idtg3_init(void)
+{
+ return rio_register_driver(&idtg3_driver);
+}
+
+static void __exit idtg3_exit(void)
+{
+ pr_debug("RIO: %s\n", __func__);
+ rio_unregister_driver(&idtg3_driver);
+ pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg3_init);
+module_exit(idtg3_exit);
+
+MODULE_DESCRIPTION("IDT RXS Gen.3 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
new file mode 100644
index 000000000..c825728eb
--- /dev/null
+++ b/drivers/rapidio/switches/idtcps.c
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * IDT CPS RapidIO switches support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/module.h>
+#include "../rio.h"
+
+#define CPS_DEFAULT_ROUTE 0xde
+#define CPS_NO_ROUTE 0xdf
+
+#define IDTCPS_RIO_DOMAIN 0xf20020
+
+static int
+idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ u32 result;
+
+ if (route_port == RIO_INVALID_ROUTE)
+ route_port = CPS_DEFAULT_ROUTE;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ result = (0xffffff00 & result) | (u32)route_port;
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, result);
+ }
+
+ return 0;
+}
+
+static int
+idtcps_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ if (CPS_DEFAULT_ROUTE == (u8)result ||
+ CPS_NO_ROUTE == (u8)result)
+ *route_port = RIO_INVALID_ROUTE;
+ else
+ *route_port = (u8)result;
+ }
+
+ return 0;
+}
+
+static int
+idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ for (i = 0x80000000; i <= 0x800000ff;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (CPS_DEFAULT_ROUTE << 24) |
+ (CPS_DEFAULT_ROUTE << 16) |
+ (CPS_DEFAULT_ROUTE << 8) | CPS_DEFAULT_ROUTE);
+ i += 4;
+ }
+ }
+
+ return 0;
+}
+
+static int
+idtcps_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 sw_domain)
+{
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_write_config_32(mport, destid, hopcount,
+ IDTCPS_RIO_DOMAIN, (u32)sw_domain);
+ return 0;
+}
+
+static int
+idtcps_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u8 *sw_domain)
+{
+ u32 regval;
+
+ /*
+ * Switch domain configuration operates only at global level
+ */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ IDTCPS_RIO_DOMAIN, &regval);
+
+ *sw_domain = (u8)(regval & 0xff);
+
+ return 0;
+}
+
+static struct rio_switch_ops idtcps_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = idtcps_route_add_entry,
+ .get_entry = idtcps_route_get_entry,
+ .clr_table = idtcps_route_clr_table,
+ .set_domain = idtcps_set_domain,
+ .get_domain = idtcps_get_domain,
+ .em_init = NULL,
+ .em_handle = NULL,
+};
+
+static int idtcps_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &idtcps_switch_ops;
+
+ if (rdev->do_enum) {
+ /* set TVAL = ~50us */
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+ /* Ensure that default routing is disabled on startup */
+ rio_write_config_32(rdev,
+ RIO_STD_RTE_DEFAULT_PORT, CPS_NO_ROUTE);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+ return 0;
+}
+
+static void idtcps_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops != &idtcps_switch_ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return;
+ }
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+static const struct rio_device_id idtcps_id_table[] = {
+ {RIO_DEVICE(RIO_DID_IDTCPS6Q, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS8, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS10Q, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS12, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTCPS16, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDT70K200, RIO_VID_IDT)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver idtcps_driver = {
+ .name = "idtcps",
+ .id_table = idtcps_id_table,
+ .probe = idtcps_probe,
+ .remove = idtcps_remove,
+};
+
+static int __init idtcps_init(void)
+{
+ return rio_register_driver(&idtcps_driver);
+}
+
+static void __exit idtcps_exit(void)
+{
+ rio_unregister_driver(&idtcps_driver);
+}
+
+device_initcall(idtcps_init);
+module_exit(idtcps_exit);
+
+MODULE_DESCRIPTION("IDT CPS Gen.1 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");