diff options
Diffstat (limited to 'drivers/regulator/max8973-regulator.c')
| -rw-r--r-- | drivers/regulator/max8973-regulator.c | 827 |
1 files changed, 827 insertions, 0 deletions
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c new file mode 100644 index 000000000..596cc36aa --- /dev/null +++ b/drivers/regulator/max8973-regulator.c @@ -0,0 +1,827 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * max8973-regulator.c -- Maxim max8973A + * + * Regulator driver for MAXIM 8973A DC-DC step-down switching regulator. + * + * Copyright (c) 2012, NVIDIA Corporation. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/max8973-regulator.h> +#include <linux/regulator/of_regulator.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of_gpio.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include <linux/irq.h> +#include <linux/interrupt.h> + +/* Register definitions */ +#define MAX8973_VOUT 0x0 +#define MAX8973_VOUT_DVS 0x1 +#define MAX8973_CONTROL1 0x2 +#define MAX8973_CONTROL2 0x3 +#define MAX8973_CHIPID1 0x4 +#define MAX8973_CHIPID2 0x5 + +#define MAX8973_MAX_VOUT_REG 2 + +/* MAX8973_VOUT */ +#define MAX8973_VOUT_ENABLE BIT(7) +#define MAX8973_VOUT_MASK 0x7F + +/* MAX8973_VOUT_DVS */ +#define MAX8973_DVS_VOUT_MASK 0x7F + +/* MAX8973_CONTROL1 */ +#define MAX8973_SNS_ENABLE BIT(7) +#define MAX8973_FPWM_EN_M BIT(6) +#define MAX8973_NFSR_ENABLE BIT(5) +#define MAX8973_AD_ENABLE BIT(4) +#define MAX8973_BIAS_ENABLE BIT(3) +#define MAX8973_FREQSHIFT_9PER BIT(2) + +#define MAX8973_RAMP_12mV_PER_US 0x0 +#define MAX8973_RAMP_25mV_PER_US 0x1 +#define MAX8973_RAMP_50mV_PER_US 0x2 +#define MAX8973_RAMP_200mV_PER_US 0x3 +#define MAX8973_RAMP_MASK 0x3 + +/* MAX8973_CONTROL2 */ +#define MAX8973_WDTMR_ENABLE BIT(6) +#define MAX8973_DISCH_ENBABLE BIT(5) +#define MAX8973_FT_ENABLE BIT(4) +#define MAX77621_T_JUNCTION_120 BIT(7) + +#define MAX8973_CKKADV_TRIP_MASK 0xC +#define MAX8973_CKKADV_TRIP_DISABLE 0xC +#define MAX8973_CKKADV_TRIP_75mV_PER_US 0x0 +#define MAX8973_CKKADV_TRIP_150mV_PER_US 0x4 +#define MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS 0x8 +#define MAX8973_CONTROL_CLKADV_TRIP_MASK 0x00030000 + +#define MAX8973_INDUCTOR_MIN_30_PER 0x0 +#define MAX8973_INDUCTOR_NOMINAL 0x1 +#define MAX8973_INDUCTOR_PLUS_30_PER 0x2 +#define MAX8973_INDUCTOR_PLUS_60_PER 0x3 +#define MAX8973_CONTROL_INDUCTOR_VALUE_MASK 0x00300000 + +#define MAX8973_MIN_VOLATGE 606250 +#define MAX8973_MAX_VOLATGE 1400000 +#define MAX8973_VOLATGE_STEP 6250 +#define MAX8973_BUCK_N_VOLTAGE 0x80 + +#define MAX77621_CHIPID_TJINT_S BIT(0) + +#define MAX77621_NORMAL_OPERATING_TEMP 100000 +#define MAX77621_TJINT_WARNING_TEMP_120 120000 +#define MAX77621_TJINT_WARNING_TEMP_140 140000 + +enum device_id { + MAX8973, + MAX77621 +}; + +/* Maxim 8973 chip information */ +struct max8973_chip { + struct device *dev; + struct regulator_desc desc; + struct regmap *regmap; + bool enable_external_control; + int dvs_gpio; + int lru_index[MAX8973_MAX_VOUT_REG]; + int curr_vout_val[MAX8973_MAX_VOUT_REG]; + int curr_vout_reg; + int curr_gpio_val; + struct regulator_ops ops; + enum device_id id; + int junction_temp_warning; + int irq; + struct thermal_zone_device *tz_device; +}; + +/* + * find_voltage_set_register: Find new voltage configuration register (VOUT). + * The finding of the new VOUT register will be based on the LRU mechanism. + * Each VOUT register will have different voltage configured . This + * Function will look if any of the VOUT register have requested voltage set + * or not. + * - If it is already there then it will make that register as most + * recently used and return as found so that caller need not to set + * the VOUT register but need to set the proper gpios to select this + * VOUT register. + * - If requested voltage is not found then it will use the least + * recently mechanism to get new VOUT register for new configuration + * and will return not_found so that caller need to set new VOUT + * register and then gpios (both). + */ +static bool find_voltage_set_register(struct max8973_chip *tps, + int req_vsel, int *vout_reg, int *gpio_val) +{ + int i; + bool found = false; + int new_vout_reg = tps->lru_index[MAX8973_MAX_VOUT_REG - 1]; + int found_index = MAX8973_MAX_VOUT_REG - 1; + + for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i) { + if (tps->curr_vout_val[tps->lru_index[i]] == req_vsel) { + new_vout_reg = tps->lru_index[i]; + found_index = i; + found = true; + goto update_lru_index; + } + } + +update_lru_index: + for (i = found_index; i > 0; i--) + tps->lru_index[i] = tps->lru_index[i - 1]; + + tps->lru_index[0] = new_vout_reg; + *gpio_val = new_vout_reg; + *vout_reg = MAX8973_VOUT + new_vout_reg; + return found; +} + +static int max8973_dcdc_get_voltage_sel(struct regulator_dev *rdev) +{ + struct max8973_chip *max = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(max->regmap, max->curr_vout_reg, &data); + if (ret < 0) { + dev_err(max->dev, "register %d read failed, err = %d\n", + max->curr_vout_reg, ret); + return ret; + } + return data & MAX8973_VOUT_MASK; +} + +static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev, + unsigned vsel) +{ + struct max8973_chip *max = rdev_get_drvdata(rdev); + int ret; + bool found = false; + int vout_reg = max->curr_vout_reg; + int gpio_val = max->curr_gpio_val; + + /* + * If gpios are available to select the VOUT register then least + * recently used register for new configuration. + */ + if (gpio_is_valid(max->dvs_gpio)) + found = find_voltage_set_register(max, vsel, + &vout_reg, &gpio_val); + + if (!found) { + ret = regmap_update_bits(max->regmap, vout_reg, + MAX8973_VOUT_MASK, vsel); + if (ret < 0) { + dev_err(max->dev, "register %d update failed, err %d\n", + vout_reg, ret); + return ret; + } + max->curr_vout_reg = vout_reg; + max->curr_vout_val[gpio_val] = vsel; + } + + /* Select proper VOUT register vio gpios */ + if (gpio_is_valid(max->dvs_gpio)) { + gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1); + max->curr_gpio_val = gpio_val; + } + return 0; +} + +static int max8973_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct max8973_chip *max = rdev_get_drvdata(rdev); + int ret; + int pwm; + + /* Enable force PWM mode in FAST mode only. */ + switch (mode) { + case REGULATOR_MODE_FAST: + pwm = MAX8973_FPWM_EN_M; + break; + + case REGULATOR_MODE_NORMAL: + pwm = 0; + break; + + default: + return -EINVAL; + } + + ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1, + MAX8973_FPWM_EN_M, pwm); + if (ret < 0) + dev_err(max->dev, "register %d update failed, err %d\n", + MAX8973_CONTROL1, ret); + return ret; +} + +static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev) +{ + struct max8973_chip *max = rdev_get_drvdata(rdev); + unsigned int data; + int ret; + + ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data); + if (ret < 0) { + dev_err(max->dev, "register %d read failed, err %d\n", + MAX8973_CONTROL1, ret); + return ret; + } + return (data & MAX8973_FPWM_EN_M) ? + REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL; +} + +static int max8973_set_current_limit(struct regulator_dev *rdev, + int min_ua, int max_ua) +{ + struct max8973_chip *max = rdev_get_drvdata(rdev); + unsigned int val; + int ret; + + if (max_ua <= 9000000) + val = MAX8973_CKKADV_TRIP_75mV_PER_US; + else if (max_ua <= 12000000) + val = MAX8973_CKKADV_TRIP_150mV_PER_US; + else + val = MAX8973_CKKADV_TRIP_DISABLE; + + ret = regmap_update_bits(max->regmap, MAX8973_CONTROL2, + MAX8973_CKKADV_TRIP_MASK, val); + if (ret < 0) { + dev_err(max->dev, "register %d update failed: %d\n", + MAX8973_CONTROL2, ret); + return ret; + } + return 0; +} + +static int max8973_get_current_limit(struct regulator_dev *rdev) +{ + struct max8973_chip *max = rdev_get_drvdata(rdev); + unsigned int control2; + int ret; + + ret = regmap_read(max->regmap, MAX8973_CONTROL2, &control2); + if (ret < 0) { + dev_err(max->dev, "register %d read failed: %d\n", + MAX8973_CONTROL2, ret); + return ret; + } + switch (control2 & MAX8973_CKKADV_TRIP_MASK) { + case MAX8973_CKKADV_TRIP_DISABLE: + return 15000000; + case MAX8973_CKKADV_TRIP_150mV_PER_US: + return 12000000; + case MAX8973_CKKADV_TRIP_75mV_PER_US: + return 9000000; + default: + break; + } + return 9000000; +} + +static const unsigned int max8973_buck_ramp_table[] = { + 12000, 25000, 50000, 200000 +}; + +static const struct regulator_ops max8973_dcdc_ops = { + .get_voltage_sel = max8973_dcdc_get_voltage_sel, + .set_voltage_sel = max8973_dcdc_set_voltage_sel, + .list_voltage = regulator_list_voltage_linear, + .set_mode = max8973_dcdc_set_mode, + .get_mode = max8973_dcdc_get_mode, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = regulator_set_ramp_delay_regmap, +}; + +static int max8973_init_dcdc(struct max8973_chip *max, + struct max8973_regulator_platform_data *pdata) +{ + int ret; + uint8_t control1 = 0; + uint8_t control2 = 0; + unsigned int data; + + ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data); + if (ret < 0) { + dev_err(max->dev, "register %d read failed, err = %d", + MAX8973_CONTROL1, ret); + return ret; + } + control1 = data & MAX8973_RAMP_MASK; + switch (control1) { + case MAX8973_RAMP_12mV_PER_US: + max->desc.ramp_delay = 12000; + break; + case MAX8973_RAMP_25mV_PER_US: + max->desc.ramp_delay = 25000; + break; + case MAX8973_RAMP_50mV_PER_US: + max->desc.ramp_delay = 50000; + break; + case MAX8973_RAMP_200mV_PER_US: + max->desc.ramp_delay = 200000; + break; + } + + if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE) + control1 |= MAX8973_SNS_ENABLE; + + if (!(pdata->control_flags & MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE)) + control1 |= MAX8973_NFSR_ENABLE; + + if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE) + control1 |= MAX8973_AD_ENABLE; + + if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE) { + control1 |= MAX8973_BIAS_ENABLE; + max->desc.enable_time = 20; + } else { + max->desc.enable_time = 240; + } + + if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE) + control1 |= MAX8973_FREQSHIFT_9PER; + + if ((pdata->junction_temp_warning == MAX77621_TJINT_WARNING_TEMP_120) && + (max->id == MAX77621)) + control2 |= MAX77621_T_JUNCTION_120; + + if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE)) + control2 |= MAX8973_DISCH_ENBABLE; + + /* Clock advance trip configuration */ + switch (pdata->control_flags & MAX8973_CONTROL_CLKADV_TRIP_MASK) { + case MAX8973_CONTROL_CLKADV_TRIP_DISABLED: + control2 |= MAX8973_CKKADV_TRIP_DISABLE; + break; + + case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US: + control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US; + break; + + case MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US: + control2 |= MAX8973_CKKADV_TRIP_150mV_PER_US; + break; + + case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS: + control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS; + break; + } + + /* Configure inductor value */ + switch (pdata->control_flags & MAX8973_CONTROL_INDUCTOR_VALUE_MASK) { + case MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL: + control2 |= MAX8973_INDUCTOR_NOMINAL; + break; + + case MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER: + control2 |= MAX8973_INDUCTOR_MIN_30_PER; + break; + + case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER: + control2 |= MAX8973_INDUCTOR_PLUS_30_PER; + break; + + case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER: + control2 |= MAX8973_INDUCTOR_PLUS_60_PER; + break; + } + + ret = regmap_write(max->regmap, MAX8973_CONTROL1, control1); + if (ret < 0) { + dev_err(max->dev, "register %d write failed, err = %d", + MAX8973_CONTROL1, ret); + return ret; + } + + ret = regmap_write(max->regmap, MAX8973_CONTROL2, control2); + if (ret < 0) { + dev_err(max->dev, "register %d write failed, err = %d", + MAX8973_CONTROL2, ret); + return ret; + } + + /* If external control is enabled then disable EN bit */ + if (max->enable_external_control && (max->id == MAX8973)) { + ret = regmap_update_bits(max->regmap, MAX8973_VOUT, + MAX8973_VOUT_ENABLE, 0); + if (ret < 0) + dev_err(max->dev, "register %d update failed, err = %d", + MAX8973_VOUT, ret); + } + return ret; +} + +static int max8973_thermal_read_temp(struct thermal_zone_device *tz, int *temp) +{ + struct max8973_chip *mchip = tz->devdata; + unsigned int val; + int ret; + + ret = regmap_read(mchip->regmap, MAX8973_CHIPID1, &val); + if (ret < 0) { + dev_err(mchip->dev, "Failed to read register CHIPID1, %d", ret); + return ret; + } + + /* +1 degC to trigger cool device */ + if (val & MAX77621_CHIPID_TJINT_S) + *temp = mchip->junction_temp_warning + 1000; + else + *temp = MAX77621_NORMAL_OPERATING_TEMP; + + return 0; +} + +static irqreturn_t max8973_thermal_irq(int irq, void *data) +{ + struct max8973_chip *mchip = data; + + thermal_zone_device_update(mchip->tz_device, + THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static const struct thermal_zone_device_ops max77621_tz_ops = { + .get_temp = max8973_thermal_read_temp, +}; + +static int max8973_thermal_init(struct max8973_chip *mchip) +{ + struct thermal_zone_device *tzd; + struct irq_data *irq_data; + unsigned long irq_flags = 0; + int ret; + + if (mchip->id != MAX77621) + return 0; + + tzd = devm_thermal_of_zone_register(mchip->dev, 0, mchip, + &max77621_tz_ops); + if (IS_ERR(tzd)) { + ret = PTR_ERR(tzd); + dev_err(mchip->dev, "Failed to register thermal sensor: %d\n", + ret); + return ret; + } + + if (mchip->irq <= 0) + return 0; + + irq_data = irq_get_irq_data(mchip->irq); + if (irq_data) + irq_flags = irqd_get_trigger_type(irq_data); + + ret = devm_request_threaded_irq(mchip->dev, mchip->irq, NULL, + max8973_thermal_irq, + IRQF_ONESHOT | IRQF_SHARED | irq_flags, + dev_name(mchip->dev), mchip); + if (ret < 0) { + dev_err(mchip->dev, "Failed to request irq %d, %d\n", + mchip->irq, ret); + return ret; + } + + return 0; +} + +static const struct regmap_config max8973_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX8973_CHIPID2, + .cache_type = REGCACHE_RBTREE, +}; + +static struct max8973_regulator_platform_data *max8973_parse_dt( + struct device *dev) +{ + struct max8973_regulator_platform_data *pdata; + struct device_node *np = dev->of_node; + int ret; + u32 pval; + bool etr_enable; + bool etr_sensitivity_high; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + pdata->enable_ext_control = of_property_read_bool(np, + "maxim,externally-enable"); + pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0); + + ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval); + if (!ret) + pdata->dvs_def_state = pval; + + if (of_property_read_bool(np, "maxim,enable-remote-sense")) + pdata->control_flags |= MAX8973_CONTROL_REMOTE_SENSE_ENABLE; + + if (of_property_read_bool(np, "maxim,enable-falling-slew-rate")) + pdata->control_flags |= + MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE; + + if (of_property_read_bool(np, "maxim,enable-active-discharge")) + pdata->control_flags |= + MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE; + + if (of_property_read_bool(np, "maxim,enable-frequency-shift")) + pdata->control_flags |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE; + + if (of_property_read_bool(np, "maxim,enable-bias-control")) + pdata->control_flags |= MAX8973_CONTROL_BIAS_ENABLE; + + etr_enable = of_property_read_bool(np, "maxim,enable-etr"); + etr_sensitivity_high = of_property_read_bool(np, + "maxim,enable-high-etr-sensitivity"); + if (etr_sensitivity_high) + etr_enable = true; + + if (etr_enable) { + if (etr_sensitivity_high) + pdata->control_flags |= + MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US; + else + pdata->control_flags |= + MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US; + } else { + pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED; + } + + pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_140; + ret = of_property_read_u32(np, "junction-warn-millicelsius", &pval); + if (!ret && (pval <= MAX77621_TJINT_WARNING_TEMP_120)) + pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_120; + + return pdata; +} + +static const struct of_device_id of_max8973_match_tbl[] = { + { .compatible = "maxim,max8973", .data = (void *)MAX8973, }, + { .compatible = "maxim,max77621", .data = (void *)MAX77621, }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_max8973_match_tbl); + +static int max8973_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max8973_regulator_platform_data *pdata; + struct regulator_init_data *ridata; + struct regulator_config config = { }; + struct regulator_dev *rdev; + struct max8973_chip *max; + bool pdata_from_dt = false; + unsigned int chip_id; + struct gpio_desc *gpiod; + enum gpiod_flags gflags; + int ret; + + pdata = dev_get_platdata(&client->dev); + + if (!pdata && client->dev.of_node) { + pdata = max8973_parse_dt(&client->dev); + pdata_from_dt = true; + } + + if (!pdata) { + dev_err(&client->dev, "No Platform data"); + return -EIO; + } + + if (pdata->dvs_gpio == -EPROBE_DEFER) + return -EPROBE_DEFER; + + max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL); + if (!max) + return -ENOMEM; + + max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config); + if (IS_ERR(max->regmap)) { + ret = PTR_ERR(max->regmap); + dev_err(&client->dev, "regmap init failed, err %d\n", ret); + return ret; + } + + if (client->dev.of_node) { + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(of_max8973_match_tbl), + &client->dev); + if (!match) + return -ENODATA; + max->id = (u32)((uintptr_t)match->data); + } else { + max->id = id->driver_data; + } + + ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id); + if (ret < 0) { + dev_err(&client->dev, "register CHIPID1 read failed, %d", ret); + return ret; + } + + dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n", + (chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7); + + i2c_set_clientdata(client, max); + max->ops = max8973_dcdc_ops; + max->dev = &client->dev; + max->desc.name = id->name; + max->desc.id = 0; + max->desc.ops = &max->ops; + max->desc.type = REGULATOR_VOLTAGE; + max->desc.owner = THIS_MODULE; + max->desc.min_uV = MAX8973_MIN_VOLATGE; + max->desc.uV_step = MAX8973_VOLATGE_STEP; + max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE; + max->desc.ramp_reg = MAX8973_CONTROL1; + max->desc.ramp_mask = MAX8973_RAMP_MASK; + max->desc.ramp_delay_table = max8973_buck_ramp_table; + max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table); + + max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL; + max->enable_external_control = pdata->enable_ext_control; + max->curr_gpio_val = pdata->dvs_def_state; + max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state; + max->junction_temp_warning = pdata->junction_temp_warning; + + max->lru_index[0] = max->curr_vout_reg; + + if (gpio_is_valid(max->dvs_gpio)) { + int gpio_flags; + int i; + + gpio_flags = (pdata->dvs_def_state) ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + ret = devm_gpio_request_one(&client->dev, max->dvs_gpio, + gpio_flags, "max8973-dvs"); + if (ret) { + dev_err(&client->dev, + "gpio_request for gpio %d failed, err = %d\n", + max->dvs_gpio, ret); + return ret; + } + + /* + * Initialize the lru index with vout_reg id + * The index 0 will be most recently used and + * set with the max->curr_vout_reg */ + for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i) + max->lru_index[i] = i; + max->lru_index[0] = max->curr_vout_reg; + max->lru_index[max->curr_vout_reg] = 0; + } else { + /* + * If there is no DVS GPIO, the VOUT register + * address is fixed. + */ + max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap; + max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap; + max->desc.vsel_reg = max->curr_vout_reg; + max->desc.vsel_mask = MAX8973_VOUT_MASK; + } + + if (pdata_from_dt) + pdata->reg_init_data = of_get_regulator_init_data(&client->dev, + client->dev.of_node, &max->desc); + + ridata = pdata->reg_init_data; + switch (max->id) { + case MAX8973: + if (!pdata->enable_ext_control) { + max->desc.enable_reg = MAX8973_VOUT; + max->desc.enable_mask = MAX8973_VOUT_ENABLE; + max->ops.enable = regulator_enable_regmap; + max->ops.disable = regulator_disable_regmap; + max->ops.is_enabled = regulator_is_enabled_regmap; + break; + } + + if (ridata && (ridata->constraints.always_on || + ridata->constraints.boot_on)) + gflags = GPIOD_OUT_HIGH; + else + gflags = GPIOD_OUT_LOW; + gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE; + gpiod = devm_gpiod_get_optional(&client->dev, + "maxim,enable", + gflags); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + if (gpiod) { + config.ena_gpiod = gpiod; + max->enable_external_control = true; + } + + break; + + case MAX77621: + /* + * We do not let the core switch this regulator on/off, + * we just leave it on. + */ + gpiod = devm_gpiod_get_optional(&client->dev, + "maxim,enable", + GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + if (gpiod) + max->enable_external_control = true; + + max->desc.enable_reg = MAX8973_VOUT; + max->desc.enable_mask = MAX8973_VOUT_ENABLE; + max->ops.enable = regulator_enable_regmap; + max->ops.disable = regulator_disable_regmap; + max->ops.is_enabled = regulator_is_enabled_regmap; + max->ops.set_current_limit = max8973_set_current_limit; + max->ops.get_current_limit = max8973_get_current_limit; + break; + default: + break; + } + + ret = max8973_init_dcdc(max, pdata); + if (ret < 0) { + dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret); + return ret; + } + + config.dev = &client->dev; + config.init_data = pdata->reg_init_data; + config.driver_data = max; + config.of_node = client->dev.of_node; + config.regmap = max->regmap; + + /* + * Register the regulators + * Turn the GPIO descriptor over to the regulator core for + * lifecycle management if we pass an ena_gpiod. + */ + if (config.ena_gpiod) + devm_gpiod_unhinge(&client->dev, config.ena_gpiod); + rdev = devm_regulator_register(&client->dev, &max->desc, &config); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(max->dev, "regulator register failed, err %d\n", ret); + return ret; + } + + max8973_thermal_init(max); + return 0; +} + +static const struct i2c_device_id max8973_id[] = { + {.name = "max8973", .driver_data = MAX8973}, + {.name = "max77621", .driver_data = MAX77621}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, max8973_id); + +static struct i2c_driver max8973_i2c_driver = { + .driver = { + .name = "max8973", + .of_match_table = of_max8973_match_tbl, + }, + .probe = max8973_probe, + .id_table = max8973_id, +}; + +static int __init max8973_init(void) +{ + return i2c_add_driver(&max8973_i2c_driver); +} +subsys_initcall(max8973_init); + +static void __exit max8973_cleanup(void) +{ + i2c_del_driver(&max8973_i2c_driver); +} +module_exit(max8973_cleanup); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_DESCRIPTION("MAX8973 voltage regulator driver"); +MODULE_LICENSE("GPL v2"); |