summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/fnic/fcpio.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/fnic/fcpio.h')
-rw-r--r--drivers/scsi/fnic/fcpio.h768
1 files changed, 768 insertions, 0 deletions
diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h
new file mode 100644
index 000000000..54a0b2ba8
--- /dev/null
+++ b/drivers/scsi/fnic/fcpio.h
@@ -0,0 +1,768 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ */
+#ifndef _FCPIO_H_
+#define _FCPIO_H_
+
+#include <linux/if_ether.h>
+
+/*
+ * This header file includes all of the data structures used for
+ * communication by the host driver to the fcp firmware.
+ */
+
+/*
+ * Exchange and sequence id space allocated to the host driver
+ */
+#define FCPIO_HOST_EXCH_RANGE_START 0x1000
+#define FCPIO_HOST_EXCH_RANGE_END 0x1fff
+#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80
+#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff
+
+/*
+ * Command entry type
+ */
+enum fcpio_type {
+ /*
+ * Initiator request types
+ */
+ FCPIO_ICMND_16 = 0x1,
+ FCPIO_ICMND_32,
+ FCPIO_ICMND_CMPL,
+ FCPIO_ITMF,
+ FCPIO_ITMF_CMPL,
+
+ /*
+ * Target request types
+ */
+ FCPIO_TCMND_16 = 0x11,
+ FCPIO_TCMND_32,
+ FCPIO_TDATA,
+ FCPIO_TXRDY,
+ FCPIO_TRSP,
+ FCPIO_TDRSP_CMPL,
+ FCPIO_TTMF,
+ FCPIO_TTMF_ACK,
+ FCPIO_TABORT,
+ FCPIO_TABORT_CMPL,
+
+ /*
+ * Misc request types
+ */
+ FCPIO_ACK = 0x20,
+ FCPIO_RESET,
+ FCPIO_RESET_CMPL,
+ FCPIO_FLOGI_REG,
+ FCPIO_FLOGI_REG_CMPL,
+ FCPIO_ECHO,
+ FCPIO_ECHO_CMPL,
+ FCPIO_LUNMAP_CHNG,
+ FCPIO_LUNMAP_REQ,
+ FCPIO_LUNMAP_REQ_CMPL,
+ FCPIO_FLOGI_FIP_REG,
+ FCPIO_FLOGI_FIP_REG_CMPL,
+};
+
+/*
+ * Header status codes from the firmware
+ */
+enum fcpio_status {
+ FCPIO_SUCCESS = 0, /* request was successful */
+
+ /*
+ * If a request to the firmware is rejected, the original request
+ * header will be returned with the status set to one of the following:
+ */
+ FCPIO_INVALID_HEADER, /* header contains invalid data */
+ FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */
+ FCPIO_INVALID_PARAM, /* some parameter in request is invalid */
+ FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
+ FCPIO_IO_NOT_FOUND, /* requested I/O was not found */
+
+ /*
+ * Once a request is processed, the firmware will usually return
+ * a cmpl message type. In cases where errors occurred,
+ * the header status field would be filled in with one of the following:
+ */
+ FCPIO_ABORTED = 0x41, /* request was aborted */
+ FCPIO_TIMEOUT, /* request was timed out */
+ FCPIO_SGL_INVALID, /* request was aborted due to sgl error */
+ FCPIO_MSS_INVALID, /* request was aborted due to mss error */
+ FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */
+ FCPIO_FW_ERR, /* request was terminated due to fw error */
+ FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */
+ FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */
+ FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
+ FCPIO_CMND_REJECTED, /* request was invalid and rejected */
+ FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */
+ FCPIO_PATH_FAILED, /* i/o sent to current path failed */
+ FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */
+};
+
+/*
+ * The header command tag. All host requests will use the "tag" field
+ * to mark commands with a unique tag. When the firmware responds to
+ * a host request, it will copy the tag field into the response.
+ *
+ * The only firmware requests that will use the rx_id/ox_id fields instead
+ * of the tag field will be the target command and target task management
+ * requests. These two requests do not have corresponding host requests
+ * since they come directly from the FC initiator on the network.
+ */
+struct fcpio_tag {
+ union {
+ u32 req_id;
+ struct {
+ u16 rx_id;
+ u16 ox_id;
+ } ex_id;
+ } u;
+};
+
+static inline void
+fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
+{
+ tag->u.req_id = id;
+}
+
+static inline void
+fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id)
+{
+ *id = tag->u.req_id;
+}
+
+static inline void
+fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
+{
+ tag->u.ex_id.rx_id = rx_id;
+ tag->u.ex_id.ox_id = ox_id;
+}
+
+static inline void
+fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id)
+{
+ *rx_id = tag->u.ex_id.rx_id;
+ *ox_id = tag->u.ex_id.ox_id;
+}
+
+/*
+ * The header for an fcpio request, whether from the firmware or from the
+ * host driver
+ */
+struct fcpio_header {
+ u8 type; /* enum fcpio_type */
+ u8 status; /* header status entry */
+ u16 _resvd; /* reserved */
+ struct fcpio_tag tag; /* header tag */
+};
+
+static inline void
+fcpio_header_enc(struct fcpio_header *hdr,
+ u8 type, u8 status,
+ struct fcpio_tag tag)
+{
+ hdr->type = type;
+ hdr->status = status;
+ hdr->_resvd = 0;
+ hdr->tag = tag;
+}
+
+static inline void
+fcpio_header_dec(struct fcpio_header *hdr,
+ u8 *type, u8 *status,
+ struct fcpio_tag *tag)
+{
+ *type = hdr->type;
+ *status = hdr->status;
+ *tag = hdr->tag;
+}
+
+#define CDB_16 16
+#define CDB_32 32
+#define LUN_ADDRESS 8
+
+/*
+ * fcpio_icmnd_16: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 16-byte command
+ */
+struct fcpio_icmnd_16 {
+ u32 lunmap_id; /* index into lunmap table */
+ u8 special_req_flags; /* special exchange request flags */
+ u8 _resvd0[3]; /* reserved */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 sense_len; /* sense buffer length */
+ u64 sgl_addr; /* scatter-gather list addr */
+ u64 sense_addr; /* sense buffer address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd1; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd2; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u16 mss; /* FC vNIC only: max burst */
+ u16 _resvd3; /* reserved */
+ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
+ u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */
+};
+
+/*
+ * Special request flags
+ */
+#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */
+#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */
+#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */
+#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_ICMND_RDDATA 0x02 /* read data */
+#define FCPIO_ICMND_WRDATA 0x01 /* write data */
+
+/*
+ * fcpio_icmnd_32: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 32-byte command
+ */
+struct fcpio_icmnd_32 {
+ u32 lunmap_id; /* index into lunmap table */
+ u8 special_req_flags; /* special exchange request flags */
+ u8 _resvd0[3]; /* reserved */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 sense_len; /* sense buffer length */
+ u64 sgl_addr; /* scatter-gather list addr */
+ u64 sense_addr; /* sense buffer address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd1; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd2; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u16 mss; /* FC vNIC only: max burst */
+ u16 _resvd3; /* reserved */
+ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
+ u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */
+};
+
+/*
+ * fcpio_itmf: host -> firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * The t_tag field is only needed when the request type is ABT_TASK.
+ */
+struct fcpio_itmf {
+ u32 lunmap_id; /* index into lunmap table */
+ u32 tm_req; /* SCSI Task Management request */
+ u32 t_tag; /* header tag of fcpio to be aborted */
+ u32 _resvd; /* _reserved */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd1; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */
+ u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */
+};
+
+/*
+ * Task Management request
+ */
+enum fcpio_itmf_tm_req_type {
+ FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */
+ FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */
+ FCPIO_ITMF_ABT_TASK_SET, /* abort task set */
+ FCPIO_ITMF_CLR_TASK_SET, /* clear task set */
+ FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */
+ FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */
+};
+
+/*
+ * fcpio_tdata: host -> firmware request
+ *
+ * used for requesting the firmware to send out a read data transfer for a
+ * target command
+ */
+struct fcpio_tdata {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 flags; /* command flags */
+ u32 rel_offset; /* data sequence relative offset */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 data_len; /* length of data expected to send */
+ u64 sgl_addr; /* scatter-gather list address */
+};
+
+/*
+ * Command flags
+ */
+#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */
+
+/*
+ * fcpio_txrdy: host -> firmware request
+ *
+ * used for requesting the firmware to send out a write data transfer for a
+ * target command
+ */
+struct fcpio_txrdy {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 rel_offset; /* data sequence relative offset */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 data_len; /* length of data expected to send */
+ u64 sgl_addr; /* scatter-gather list address */
+};
+
+/*
+ * fcpio_trsp: host -> firmware request
+ *
+ * used for requesting the firmware to send out a response for a target
+ * command
+ */
+struct fcpio_trsp {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 sense_len; /* sense data buffer length */
+ u64 sense_addr; /* sense data buffer address */
+ u16 _resvd1; /* reserved */
+ u8 flags; /* response request flags */
+ u8 scsi_status; /* SCSI status */
+ u32 residual; /* SCSI data residual value of I/O */
+};
+
+/*
+ * resposnse request flags
+ */
+#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */
+#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */
+
+/*
+ * fcpio_ttmf_ack: host -> firmware response
+ *
+ * used by the host to indicate to the firmware it has received and processed
+ * the target tmf request
+ */
+struct fcpio_ttmf_ack {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 tmf_status; /* SCSI task management status */
+};
+
+/*
+ * fcpio_tabort: host -> firmware request
+ *
+ * used by the host to request the firmware to abort a target request that was
+ * received by the firmware
+ */
+struct fcpio_tabort {
+ u16 rx_id; /* rx_id of the target request */
+};
+
+/*
+ * fcpio_reset: host -> firmware request
+ *
+ * used by the host to signal a reset of the driver to the firmware
+ * and to request firmware to clean up all outstanding I/O
+ */
+struct fcpio_reset {
+ u32 _resvd;
+};
+
+enum fcpio_flogi_reg_format_type {
+ FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */
+ FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */
+};
+
+/*
+ * fcpio_flogi_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_reg {
+ u8 format;
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */
+ u16 _resvd;
+ u32 r_a_tov; /* R_A_TOV in msec */
+ u32 e_d_tov; /* E_D_TOV in msec */
+};
+
+/*
+ * fcpio_echo: host -> firmware request
+ *
+ * sends a heartbeat echo request to the firmware
+ */
+struct fcpio_echo {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req: host -> firmware request
+ *
+ * scsi vnic only
+ * sends a request to retrieve the lunmap table for scsi vnics
+ */
+struct fcpio_lunmap_req {
+ u64 addr; /* address of the buffer */
+ u32 len; /* len of the buffer */
+};
+
+/*
+ * fcpio_flogi_fip_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_fip_reg {
+ u8 _resvd0;
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */
+ u16 _resvd1;
+ u32 r_a_tov; /* R_A_TOV in msec */
+ u32 e_d_tov; /* E_D_TOV in msec */
+ u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */
+ u16 _resvd2;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the host to the
+ * firmware. They are 128 bytes per structure.
+ */
+#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */
+
+struct fcpio_host_req {
+ struct fcpio_header hdr;
+
+ union {
+ /*
+ * Defines space needed for request
+ */
+ u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];
+
+ /*
+ * Initiator host requests
+ */
+ struct fcpio_icmnd_16 icmnd_16;
+ struct fcpio_icmnd_32 icmnd_32;
+ struct fcpio_itmf itmf;
+
+ /*
+ * Target host requests
+ */
+ struct fcpio_tdata tdata;
+ struct fcpio_txrdy txrdy;
+ struct fcpio_trsp trsp;
+ struct fcpio_ttmf_ack ttmf_ack;
+ struct fcpio_tabort tabort;
+
+ /*
+ * Misc requests
+ */
+ struct fcpio_reset reset;
+ struct fcpio_flogi_reg flogi_reg;
+ struct fcpio_echo echo;
+ struct fcpio_lunmap_req lunmap_req;
+ struct fcpio_flogi_fip_reg flogi_fip_reg;
+ } u;
+};
+
+/*
+ * fcpio_icmnd_cmpl: firmware -> host response
+ *
+ * used for sending the host a response to an initiator command
+ */
+struct fcpio_icmnd_cmpl {
+ u8 _resvd0[6]; /* reserved */
+ u8 flags; /* response flags */
+ u8 scsi_status; /* SCSI status */
+ u32 residual; /* SCSI data residual length */
+ u32 sense_len; /* SCSI sense length */
+};
+
+/*
+ * response flags
+ */
+#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */
+#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */
+
+/*
+ * fcpio_itmf_cmpl: firmware -> host response
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct fcpio_itmf_cmpl {
+ u32 _resvd; /* reserved */
+};
+
+/*
+ * fcpio_tcmnd_16: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 16-Byte
+ * request
+ */
+struct fcpio_tcmnd_16 {
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd2; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 _resvd1; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */
+#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */
+#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */
+#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_TCMND_RDDATA 0x02 /* read data */
+#define FCPIO_TCMND_WRDATA 0x01 /* write data */
+
+/*
+ * fcpio_tcmnd_32: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 32-Byte
+ * request
+ */
+struct fcpio_tcmnd_32 {
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd2; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 _resvd0; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * fcpio_tdrsp_cmpl: firmware -> host response
+ *
+ * used by the firmware to notify the host of a response to a host target
+ * command
+ */
+struct fcpio_tdrsp_cmpl {
+ u16 rx_id; /* rx_id of the target request */
+ u16 _resvd0; /* reserved */
+};
+
+/*
+ * fcpio_ttmf: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming task management
+ * function request
+ */
+struct fcpio_ttmf {
+ u8 _resvd0; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 _resvd2[3]; /* reserved */
+ u32 tmf_type; /* task management request type */
+};
+
+/*
+ * Task Management request
+ */
+#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */
+#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */
+#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */
+#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */
+#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */
+
+/*
+ * fcpio_tabort_cmpl: firmware -> host response
+ *
+ * used by the firmware to respond to a host's tabort request
+ */
+struct fcpio_tabort_cmpl {
+ u16 rx_id; /* rx_id of the target request */
+ u16 _resvd0; /* reserved */
+};
+
+/*
+ * fcpio_ack: firmware -> host response
+ *
+ * used by firmware to notify the host of the last work request received
+ */
+struct fcpio_ack {
+ u16 request_out; /* last host entry received */
+ u16 _resvd;
+};
+
+/*
+ * fcpio_reset_cmpl: firmware -> host response
+ *
+ * use by firmware to respond to the host's reset request
+ */
+struct fcpio_reset_cmpl {
+ u16 vnic_id;
+};
+
+/*
+ * fcpio_flogi_reg_cmpl: firmware -> host response
+ *
+ * fc vnic only
+ * response to the fcpio_flogi_reg request
+ */
+struct fcpio_flogi_reg_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_echo_cmpl: firmware -> host response
+ *
+ * response to the fcpio_echo request
+ */
+struct fcpio_echo_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_chng: firmware -> host notification
+ *
+ * scsi vnic only
+ * notifies the host that the lunmap tables have changed
+ */
+struct fcpio_lunmap_chng {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req_cmpl: firmware -> host response
+ *
+ * scsi vnic only
+ * response for lunmap table request from the host
+ */
+struct fcpio_lunmap_req_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the firmware to
+ * the host. They are 64 bytes per structure.
+ */
+#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */
+struct fcpio_fw_req {
+ struct fcpio_header hdr;
+
+ union {
+ /*
+ * Defines space needed for request
+ */
+ u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];
+
+ /*
+ * Initiator firmware responses
+ */
+ struct fcpio_icmnd_cmpl icmnd_cmpl;
+ struct fcpio_itmf_cmpl itmf_cmpl;
+
+ /*
+ * Target firmware new requests
+ */
+ struct fcpio_tcmnd_16 tcmnd_16;
+ struct fcpio_tcmnd_32 tcmnd_32;
+
+ /*
+ * Target firmware responses
+ */
+ struct fcpio_tdrsp_cmpl tdrsp_cmpl;
+ struct fcpio_ttmf ttmf;
+ struct fcpio_tabort_cmpl tabort_cmpl;
+
+ /*
+ * Firmware response to work received
+ */
+ struct fcpio_ack ack;
+
+ /*
+ * Misc requests
+ */
+ struct fcpio_reset_cmpl reset_cmpl;
+ struct fcpio_flogi_reg_cmpl flogi_reg_cmpl;
+ struct fcpio_echo_cmpl echo_cmpl;
+ struct fcpio_lunmap_chng lunmap_chng;
+ struct fcpio_lunmap_req_cmpl lunmap_req_cmpl;
+ } u;
+};
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the MSB of the structure
+ */
+static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
+{
+ u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+ if (color)
+ *c |= 0x80;
+ else
+ *c &= ~0x80;
+}
+
+static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color)
+{
+ u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+ *color = *c >> 7;
+
+ /*
+ * Make sure color bit is read from desc *before* other fields
+ * are read from desc. Hardware guarantees color bit is last
+ * bit (byte) written. Adding the rmb() prevents the compiler
+ * and/or CPU from reordering the reads which would potentially
+ * result in reading stale values.
+ */
+
+ rmb();
+
+}
+
+/*
+ * Lunmap table entry for scsi vnics
+ */
+#define FCPIO_LUNMAP_TABLE_SIZE 256
+#define FCPIO_FLAGS_LUNMAP_VALID 0x80
+#define FCPIO_FLAGS_BOOT 0x01
+struct fcpio_lunmap_entry {
+ u8 bus;
+ u8 target;
+ u8 lun;
+ u8 path_cnt;
+ u16 flags;
+ u16 update_cnt;
+};
+
+struct fcpio_lunmap_tbl {
+ u32 update_cnt;
+ struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
+};
+
+#endif /* _FCPIO_H_ */