summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_scan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/scsi_scan.c')
-rw-r--r--drivers/scsi/scsi_scan.c2000
1 files changed, 2000 insertions, 0 deletions
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
new file mode 100644
index 000000000..bab00b65b
--- /dev/null
+++ b/drivers/scsi/scsi_scan.c
@@ -0,0 +1,2000 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * scsi_scan.c
+ *
+ * Copyright (C) 2000 Eric Youngdale,
+ * Copyright (C) 2002 Patrick Mansfield
+ *
+ * The general scanning/probing algorithm is as follows, exceptions are
+ * made to it depending on device specific flags, compilation options, and
+ * global variable (boot or module load time) settings.
+ *
+ * A specific LUN is scanned via an INQUIRY command; if the LUN has a
+ * device attached, a scsi_device is allocated and setup for it.
+ *
+ * For every id of every channel on the given host:
+ *
+ * Scan LUN 0; if the target responds to LUN 0 (even if there is no
+ * device or storage attached to LUN 0):
+ *
+ * If LUN 0 has a device attached, allocate and setup a
+ * scsi_device for it.
+ *
+ * If target is SCSI-3 or up, issue a REPORT LUN, and scan
+ * all of the LUNs returned by the REPORT LUN; else,
+ * sequentially scan LUNs up until some maximum is reached,
+ * or a LUN is seen that cannot have a device attached to it.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/spinlock.h>
+#include <linux/async.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_devinfo.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_dh.h>
+#include <scsi/scsi_eh.h>
+
+#include "scsi_priv.h"
+#include "scsi_logging.h"
+
+#define ALLOC_FAILURE_MSG KERN_ERR "%s: Allocation failure during" \
+ " SCSI scanning, some SCSI devices might not be configured\n"
+
+/*
+ * Default timeout
+ */
+#define SCSI_TIMEOUT (2*HZ)
+#define SCSI_REPORT_LUNS_TIMEOUT (30*HZ)
+
+/*
+ * Prefix values for the SCSI id's (stored in sysfs name field)
+ */
+#define SCSI_UID_SER_NUM 'S'
+#define SCSI_UID_UNKNOWN 'Z'
+
+/*
+ * Return values of some of the scanning functions.
+ *
+ * SCSI_SCAN_NO_RESPONSE: no valid response received from the target, this
+ * includes allocation or general failures preventing IO from being sent.
+ *
+ * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is available
+ * on the given LUN.
+ *
+ * SCSI_SCAN_LUN_PRESENT: target responded, and a device is available on a
+ * given LUN.
+ */
+#define SCSI_SCAN_NO_RESPONSE 0
+#define SCSI_SCAN_TARGET_PRESENT 1
+#define SCSI_SCAN_LUN_PRESENT 2
+
+static const char *scsi_null_device_strs = "nullnullnullnull";
+
+#define MAX_SCSI_LUNS 512
+
+static u64 max_scsi_luns = MAX_SCSI_LUNS;
+
+module_param_named(max_luns, max_scsi_luns, ullong, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(max_luns,
+ "last scsi LUN (should be between 1 and 2^64-1)");
+
+#ifdef CONFIG_SCSI_SCAN_ASYNC
+#define SCSI_SCAN_TYPE_DEFAULT "async"
+#else
+#define SCSI_SCAN_TYPE_DEFAULT "sync"
+#endif
+
+static char scsi_scan_type[7] = SCSI_SCAN_TYPE_DEFAULT;
+
+module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type),
+ S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(scan, "sync, async, manual, or none. "
+ "Setting to 'manual' disables automatic scanning, but allows "
+ "for manual device scan via the 'scan' sysfs attribute.");
+
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
+
+module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(inq_timeout,
+ "Timeout (in seconds) waiting for devices to answer INQUIRY."
+ " Default is 20. Some devices may need more; most need less.");
+
+/* This lock protects only this list */
+static DEFINE_SPINLOCK(async_scan_lock);
+static LIST_HEAD(scanning_hosts);
+
+struct async_scan_data {
+ struct list_head list;
+ struct Scsi_Host *shost;
+ struct completion prev_finished;
+};
+
+/*
+ * scsi_enable_async_suspend - Enable async suspend and resume
+ */
+void scsi_enable_async_suspend(struct device *dev)
+{
+ /*
+ * If a user has disabled async probing a likely reason is due to a
+ * storage enclosure that does not inject staggered spin-ups. For
+ * safety, make resume synchronous as well in that case.
+ */
+ if (strncmp(scsi_scan_type, "async", 5) != 0)
+ return;
+ /* Enable asynchronous suspend and resume. */
+ device_enable_async_suspend(dev);
+}
+
+/**
+ * scsi_complete_async_scans - Wait for asynchronous scans to complete
+ *
+ * When this function returns, any host which started scanning before
+ * this function was called will have finished its scan. Hosts which
+ * started scanning after this function was called may or may not have
+ * finished.
+ */
+int scsi_complete_async_scans(void)
+{
+ struct async_scan_data *data;
+
+ do {
+ if (list_empty(&scanning_hosts))
+ return 0;
+ /* If we can't get memory immediately, that's OK. Just
+ * sleep a little. Even if we never get memory, the async
+ * scans will finish eventually.
+ */
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ msleep(1);
+ } while (!data);
+
+ data->shost = NULL;
+ init_completion(&data->prev_finished);
+
+ spin_lock(&async_scan_lock);
+ /* Check that there's still somebody else on the list */
+ if (list_empty(&scanning_hosts))
+ goto done;
+ list_add_tail(&data->list, &scanning_hosts);
+ spin_unlock(&async_scan_lock);
+
+ printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n");
+ wait_for_completion(&data->prev_finished);
+
+ spin_lock(&async_scan_lock);
+ list_del(&data->list);
+ if (!list_empty(&scanning_hosts)) {
+ struct async_scan_data *next = list_entry(scanning_hosts.next,
+ struct async_scan_data, list);
+ complete(&next->prev_finished);
+ }
+ done:
+ spin_unlock(&async_scan_lock);
+
+ kfree(data);
+ return 0;
+}
+
+/**
+ * scsi_unlock_floptical - unlock device via a special MODE SENSE command
+ * @sdev: scsi device to send command to
+ * @result: area to store the result of the MODE SENSE
+ *
+ * Description:
+ * Send a vendor specific MODE SENSE (not a MODE SELECT) command.
+ * Called for BLIST_KEY devices.
+ **/
+static void scsi_unlock_floptical(struct scsi_device *sdev,
+ unsigned char *result)
+{
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+
+ sdev_printk(KERN_NOTICE, sdev, "unlocking floptical drive\n");
+ scsi_cmd[0] = MODE_SENSE;
+ scsi_cmd[1] = 0;
+ scsi_cmd[2] = 0x2e;
+ scsi_cmd[3] = 0;
+ scsi_cmd[4] = 0x2a; /* size */
+ scsi_cmd[5] = 0;
+ scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL,
+ SCSI_TIMEOUT, 3, NULL);
+}
+
+static int scsi_realloc_sdev_budget_map(struct scsi_device *sdev,
+ unsigned int depth)
+{
+ int new_shift = sbitmap_calculate_shift(depth);
+ bool need_alloc = !sdev->budget_map.map;
+ bool need_free = false;
+ int ret;
+ struct sbitmap sb_backup;
+
+ depth = min_t(unsigned int, depth, scsi_device_max_queue_depth(sdev));
+
+ /*
+ * realloc if new shift is calculated, which is caused by setting
+ * up one new default queue depth after calling ->slave_configure
+ */
+ if (!need_alloc && new_shift != sdev->budget_map.shift)
+ need_alloc = need_free = true;
+
+ if (!need_alloc)
+ return 0;
+
+ /*
+ * Request queue has to be frozen for reallocating budget map,
+ * and here disk isn't added yet, so freezing is pretty fast
+ */
+ if (need_free) {
+ blk_mq_freeze_queue(sdev->request_queue);
+ sb_backup = sdev->budget_map;
+ }
+ ret = sbitmap_init_node(&sdev->budget_map,
+ scsi_device_max_queue_depth(sdev),
+ new_shift, GFP_KERNEL,
+ sdev->request_queue->node, false, true);
+ if (!ret)
+ sbitmap_resize(&sdev->budget_map, depth);
+
+ if (need_free) {
+ if (ret)
+ sdev->budget_map = sb_backup;
+ else
+ sbitmap_free(&sb_backup);
+ ret = 0;
+ blk_mq_unfreeze_queue(sdev->request_queue);
+ }
+ return ret;
+}
+
+/**
+ * scsi_alloc_sdev - allocate and setup a scsi_Device
+ * @starget: which target to allocate a &scsi_device for
+ * @lun: which lun
+ * @hostdata: usually NULL and set by ->slave_alloc instead
+ *
+ * Description:
+ * Allocate, initialize for io, and return a pointer to a scsi_Device.
+ * Stores the @shost, @channel, @id, and @lun in the scsi_Device, and
+ * adds scsi_Device to the appropriate list.
+ *
+ * Return value:
+ * scsi_Device pointer, or NULL on failure.
+ **/
+static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
+ u64 lun, void *hostdata)
+{
+ unsigned int depth;
+ struct scsi_device *sdev;
+ struct request_queue *q;
+ int display_failure_msg = 1, ret;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+
+ sdev = kzalloc(sizeof(*sdev) + shost->transportt->device_size,
+ GFP_KERNEL);
+ if (!sdev)
+ goto out;
+
+ sdev->vendor = scsi_null_device_strs;
+ sdev->model = scsi_null_device_strs;
+ sdev->rev = scsi_null_device_strs;
+ sdev->host = shost;
+ sdev->queue_ramp_up_period = SCSI_DEFAULT_RAMP_UP_PERIOD;
+ sdev->id = starget->id;
+ sdev->lun = lun;
+ sdev->channel = starget->channel;
+ mutex_init(&sdev->state_mutex);
+ sdev->sdev_state = SDEV_CREATED;
+ INIT_LIST_HEAD(&sdev->siblings);
+ INIT_LIST_HEAD(&sdev->same_target_siblings);
+ INIT_LIST_HEAD(&sdev->starved_entry);
+ INIT_LIST_HEAD(&sdev->event_list);
+ spin_lock_init(&sdev->list_lock);
+ mutex_init(&sdev->inquiry_mutex);
+ INIT_WORK(&sdev->event_work, scsi_evt_thread);
+ INIT_WORK(&sdev->requeue_work, scsi_requeue_run_queue);
+
+ sdev->sdev_gendev.parent = get_device(&starget->dev);
+ sdev->sdev_target = starget;
+
+ /* usually NULL and set by ->slave_alloc instead */
+ sdev->hostdata = hostdata;
+
+ /* if the device needs this changing, it may do so in the
+ * slave_configure function */
+ sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED;
+
+ /*
+ * Some low level driver could use device->type
+ */
+ sdev->type = -1;
+
+ /*
+ * Assume that the device will have handshaking problems,
+ * and then fix this field later if it turns out it
+ * doesn't
+ */
+ sdev->borken = 1;
+
+ sdev->sg_reserved_size = INT_MAX;
+
+ q = blk_mq_init_queue(&sdev->host->tag_set);
+ if (IS_ERR(q)) {
+ /* release fn is set up in scsi_sysfs_device_initialise, so
+ * have to free and put manually here */
+ put_device(&starget->dev);
+ kfree(sdev);
+ goto out;
+ }
+ kref_get(&sdev->host->tagset_refcnt);
+ sdev->request_queue = q;
+ q->queuedata = sdev;
+ __scsi_init_queue(sdev->host, q);
+ WARN_ON_ONCE(!blk_get_queue(q));
+
+ depth = sdev->host->cmd_per_lun ?: 1;
+
+ /*
+ * Use .can_queue as budget map's depth because we have to
+ * support adjusting queue depth from sysfs. Meantime use
+ * default device queue depth to figure out sbitmap shift
+ * since we use this queue depth most of times.
+ */
+ if (scsi_realloc_sdev_budget_map(sdev, depth)) {
+ put_device(&starget->dev);
+ kfree(sdev);
+ goto out;
+ }
+
+ scsi_change_queue_depth(sdev, depth);
+
+ scsi_sysfs_device_initialize(sdev);
+
+ if (shost->hostt->slave_alloc) {
+ ret = shost->hostt->slave_alloc(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+ */
+ if (ret == -ENXIO)
+ display_failure_msg = 0;
+ goto out_device_destroy;
+ }
+ }
+
+ return sdev;
+
+out_device_destroy:
+ __scsi_remove_device(sdev);
+out:
+ if (display_failure_msg)
+ printk(ALLOC_FAILURE_MSG, __func__);
+ return NULL;
+}
+
+static void scsi_target_destroy(struct scsi_target *starget)
+{
+ struct device *dev = &starget->dev;
+ struct Scsi_Host *shost = dev_to_shost(dev->parent);
+ unsigned long flags;
+
+ BUG_ON(starget->state == STARGET_DEL);
+ starget->state = STARGET_DEL;
+ transport_destroy_device(dev);
+ spin_lock_irqsave(shost->host_lock, flags);
+ if (shost->hostt->target_destroy)
+ shost->hostt->target_destroy(starget);
+ list_del_init(&starget->siblings);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ put_device(dev);
+}
+
+static void scsi_target_dev_release(struct device *dev)
+{
+ struct device *parent = dev->parent;
+ struct scsi_target *starget = to_scsi_target(dev);
+
+ kfree(starget);
+ put_device(parent);
+}
+
+static struct device_type scsi_target_type = {
+ .name = "scsi_target",
+ .release = scsi_target_dev_release,
+};
+
+int scsi_is_target_device(const struct device *dev)
+{
+ return dev->type == &scsi_target_type;
+}
+EXPORT_SYMBOL(scsi_is_target_device);
+
+static struct scsi_target *__scsi_find_target(struct device *parent,
+ int channel, uint id)
+{
+ struct scsi_target *starget, *found_starget = NULL;
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ /*
+ * Search for an existing target for this sdev.
+ */
+ list_for_each_entry(starget, &shost->__targets, siblings) {
+ if (starget->id == id &&
+ starget->channel == channel) {
+ found_starget = starget;
+ break;
+ }
+ }
+ if (found_starget)
+ get_device(&found_starget->dev);
+
+ return found_starget;
+}
+
+/**
+ * scsi_target_reap_ref_release - remove target from visibility
+ * @kref: the reap_ref in the target being released
+ *
+ * Called on last put of reap_ref, which is the indication that no device
+ * under this target is visible anymore, so render the target invisible in
+ * sysfs. Note: we have to be in user context here because the target reaps
+ * should be done in places where the scsi device visibility is being removed.
+ */
+static void scsi_target_reap_ref_release(struct kref *kref)
+{
+ struct scsi_target *starget
+ = container_of(kref, struct scsi_target, reap_ref);
+
+ /*
+ * if we get here and the target is still in a CREATED state that
+ * means it was allocated but never made visible (because a scan
+ * turned up no LUNs), so don't call device_del() on it.
+ */
+ if ((starget->state != STARGET_CREATED) &&
+ (starget->state != STARGET_CREATED_REMOVE)) {
+ transport_remove_device(&starget->dev);
+ device_del(&starget->dev);
+ }
+ scsi_target_destroy(starget);
+}
+
+static void scsi_target_reap_ref_put(struct scsi_target *starget)
+{
+ kref_put(&starget->reap_ref, scsi_target_reap_ref_release);
+}
+
+/**
+ * scsi_alloc_target - allocate a new or find an existing target
+ * @parent: parent of the target (need not be a scsi host)
+ * @channel: target channel number (zero if no channels)
+ * @id: target id number
+ *
+ * Return an existing target if one exists, provided it hasn't already
+ * gone into STARGET_DEL state, otherwise allocate a new target.
+ *
+ * The target is returned with an incremented reference, so the caller
+ * is responsible for both reaping and doing a last put
+ */
+static struct scsi_target *scsi_alloc_target(struct device *parent,
+ int channel, uint id)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ struct device *dev = NULL;
+ unsigned long flags;
+ const int size = sizeof(struct scsi_target)
+ + shost->transportt->target_size;
+ struct scsi_target *starget;
+ struct scsi_target *found_target;
+ int error, ref_got;
+
+ starget = kzalloc(size, GFP_KERNEL);
+ if (!starget) {
+ printk(KERN_ERR "%s: allocation failure\n", __func__);
+ return NULL;
+ }
+ dev = &starget->dev;
+ device_initialize(dev);
+ kref_init(&starget->reap_ref);
+ dev->parent = get_device(parent);
+ dev_set_name(dev, "target%d:%d:%d", shost->host_no, channel, id);
+ dev->bus = &scsi_bus_type;
+ dev->type = &scsi_target_type;
+ scsi_enable_async_suspend(dev);
+ starget->id = id;
+ starget->channel = channel;
+ starget->can_queue = 0;
+ INIT_LIST_HEAD(&starget->siblings);
+ INIT_LIST_HEAD(&starget->devices);
+ starget->state = STARGET_CREATED;
+ starget->scsi_level = SCSI_2;
+ starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
+ retry:
+ spin_lock_irqsave(shost->host_lock, flags);
+
+ found_target = __scsi_find_target(parent, channel, id);
+ if (found_target)
+ goto found;
+
+ list_add_tail(&starget->siblings, &shost->__targets);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ /* allocate and add */
+ transport_setup_device(dev);
+ if (shost->hostt->target_alloc) {
+ error = shost->hostt->target_alloc(starget);
+
+ if(error) {
+ if (error != -ENXIO)
+ dev_err(dev, "target allocation failed, error %d\n", error);
+ /* don't want scsi_target_reap to do the final
+ * put because it will be under the host lock */
+ scsi_target_destroy(starget);
+ return NULL;
+ }
+ }
+ get_device(dev);
+
+ return starget;
+
+ found:
+ /*
+ * release routine already fired if kref is zero, so if we can still
+ * take the reference, the target must be alive. If we can't, it must
+ * be dying and we need to wait for a new target
+ */
+ ref_got = kref_get_unless_zero(&found_target->reap_ref);
+
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ if (ref_got) {
+ put_device(dev);
+ return found_target;
+ }
+ /*
+ * Unfortunately, we found a dying target; need to wait until it's
+ * dead before we can get a new one. There is an anomaly here. We
+ * *should* call scsi_target_reap() to balance the kref_get() of the
+ * reap_ref above. However, since the target being released, it's
+ * already invisible and the reap_ref is irrelevant. If we call
+ * scsi_target_reap() we might spuriously do another device_del() on
+ * an already invisible target.
+ */
+ put_device(&found_target->dev);
+ /*
+ * length of time is irrelevant here, we just want to yield the CPU
+ * for a tick to avoid busy waiting for the target to die.
+ */
+ msleep(1);
+ goto retry;
+}
+
+/**
+ * scsi_target_reap - check to see if target is in use and destroy if not
+ * @starget: target to be checked
+ *
+ * This is used after removing a LUN or doing a last put of the target
+ * it checks atomically that nothing is using the target and removes
+ * it if so.
+ */
+void scsi_target_reap(struct scsi_target *starget)
+{
+ /*
+ * serious problem if this triggers: STARGET_DEL is only set in the if
+ * the reap_ref drops to zero, so we're trying to do another final put
+ * on an already released kref
+ */
+ BUG_ON(starget->state == STARGET_DEL);
+ scsi_target_reap_ref_put(starget);
+}
+
+/**
+ * scsi_sanitize_inquiry_string - remove non-graphical chars from an
+ * INQUIRY result string
+ * @s: INQUIRY result string to sanitize
+ * @len: length of the string
+ *
+ * Description:
+ * The SCSI spec says that INQUIRY vendor, product, and revision
+ * strings must consist entirely of graphic ASCII characters,
+ * padded on the right with spaces. Since not all devices obey
+ * this rule, we will replace non-graphic or non-ASCII characters
+ * with spaces. Exception: a NUL character is interpreted as a
+ * string terminator, so all the following characters are set to
+ * spaces.
+ **/
+void scsi_sanitize_inquiry_string(unsigned char *s, int len)
+{
+ int terminated = 0;
+
+ for (; len > 0; (--len, ++s)) {
+ if (*s == 0)
+ terminated = 1;
+ if (terminated || *s < 0x20 || *s > 0x7e)
+ *s = ' ';
+ }
+}
+EXPORT_SYMBOL(scsi_sanitize_inquiry_string);
+
+/**
+ * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
+ * @sdev: scsi_device to probe
+ * @inq_result: area to store the INQUIRY result
+ * @result_len: len of inq_result
+ * @bflags: store any bflags found here
+ *
+ * Description:
+ * Probe the lun associated with @req using a standard SCSI INQUIRY;
+ *
+ * If the INQUIRY is successful, zero is returned and the
+ * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
+ * are copied to the scsi_device any flags value is stored in *@bflags.
+ **/
+static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
+ int result_len, blist_flags_t *bflags)
+{
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+ int first_inquiry_len, try_inquiry_len, next_inquiry_len;
+ int response_len = 0;
+ int pass, count, result;
+ struct scsi_sense_hdr sshdr;
+
+ *bflags = 0;
+
+ /* Perform up to 3 passes. The first pass uses a conservative
+ * transfer length of 36 unless sdev->inquiry_len specifies a
+ * different value. */
+ first_inquiry_len = sdev->inquiry_len ? sdev->inquiry_len : 36;
+ try_inquiry_len = first_inquiry_len;
+ pass = 1;
+
+ next_pass:
+ SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
+ "scsi scan: INQUIRY pass %d length %d\n",
+ pass, try_inquiry_len));
+
+ /* Each pass gets up to three chances to ignore Unit Attention */
+ for (count = 0; count < 3; ++count) {
+ int resid;
+
+ memset(scsi_cmd, 0, 6);
+ scsi_cmd[0] = INQUIRY;
+ scsi_cmd[4] = (unsigned char) try_inquiry_len;
+
+ memset(inq_result, 0, try_inquiry_len);
+
+ result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
+ inq_result, try_inquiry_len, &sshdr,
+ HZ / 2 + HZ * scsi_inq_timeout, 3,
+ &resid);
+
+ SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
+ "scsi scan: INQUIRY %s with code 0x%x\n",
+ result ? "failed" : "successful", result));
+
+ if (result > 0) {
+ /*
+ * not-ready to ready transition [asc/ascq=0x28/0x0]
+ * or power-on, reset [asc/ascq=0x29/0x0], continue.
+ * INQUIRY should not yield UNIT_ATTENTION
+ * but many buggy devices do so anyway.
+ */
+ if (scsi_status_is_check_condition(result) &&
+ scsi_sense_valid(&sshdr)) {
+ if ((sshdr.sense_key == UNIT_ATTENTION) &&
+ ((sshdr.asc == 0x28) ||
+ (sshdr.asc == 0x29)) &&
+ (sshdr.ascq == 0))
+ continue;
+ }
+ } else if (result == 0) {
+ /*
+ * if nothing was transferred, we try
+ * again. It's a workaround for some USB
+ * devices.
+ */
+ if (resid == try_inquiry_len)
+ continue;
+ }
+ break;
+ }
+
+ if (result == 0) {
+ scsi_sanitize_inquiry_string(&inq_result[8], 8);
+ scsi_sanitize_inquiry_string(&inq_result[16], 16);
+ scsi_sanitize_inquiry_string(&inq_result[32], 4);
+
+ response_len = inq_result[4] + 5;
+ if (response_len > 255)
+ response_len = first_inquiry_len; /* sanity */
+
+ /*
+ * Get any flags for this device.
+ *
+ * XXX add a bflags to scsi_device, and replace the
+ * corresponding bit fields in scsi_device, so bflags
+ * need not be passed as an argument.
+ */
+ *bflags = scsi_get_device_flags(sdev, &inq_result[8],
+ &inq_result[16]);
+
+ /* When the first pass succeeds we gain information about
+ * what larger transfer lengths might work. */
+ if (pass == 1) {
+ if (BLIST_INQUIRY_36 & *bflags)
+ next_inquiry_len = 36;
+ /*
+ * LLD specified a maximum sdev->inquiry_len
+ * but device claims it has more data. Capping
+ * the length only makes sense for legacy
+ * devices. If a device supports SPC-4 (2014)
+ * or newer, assume that it is safe to ask for
+ * as much as the device says it supports.
+ */
+ else if (sdev->inquiry_len &&
+ response_len > sdev->inquiry_len &&
+ (inq_result[2] & 0x7) < 6) /* SPC-4 */
+ next_inquiry_len = sdev->inquiry_len;
+ else
+ next_inquiry_len = response_len;
+
+ /* If more data is available perform the second pass */
+ if (next_inquiry_len > try_inquiry_len) {
+ try_inquiry_len = next_inquiry_len;
+ pass = 2;
+ goto next_pass;
+ }
+ }
+
+ } else if (pass == 2) {
+ sdev_printk(KERN_INFO, sdev,
+ "scsi scan: %d byte inquiry failed. "
+ "Consider BLIST_INQUIRY_36 for this device\n",
+ try_inquiry_len);
+
+ /* If this pass failed, the third pass goes back and transfers
+ * the same amount as we successfully got in the first pass. */
+ try_inquiry_len = first_inquiry_len;
+ pass = 3;
+ goto next_pass;
+ }
+
+ /* If the last transfer attempt got an error, assume the
+ * peripheral doesn't exist or is dead. */
+ if (result)
+ return -EIO;
+
+ /* Don't report any more data than the device says is valid */
+ sdev->inquiry_len = min(try_inquiry_len, response_len);
+
+ /*
+ * XXX Abort if the response length is less than 36? If less than
+ * 32, the lookup of the device flags (above) could be invalid,
+ * and it would be possible to take an incorrect action - we do
+ * not want to hang because of a short INQUIRY. On the flip side,
+ * if the device is spun down or becoming ready (and so it gives a
+ * short INQUIRY), an abort here prevents any further use of the
+ * device, including spin up.
+ *
+ * On the whole, the best approach seems to be to assume the first
+ * 36 bytes are valid no matter what the device says. That's
+ * better than copying < 36 bytes to the inquiry-result buffer
+ * and displaying garbage for the Vendor, Product, or Revision
+ * strings.
+ */
+ if (sdev->inquiry_len < 36) {
+ if (!sdev->host->short_inquiry) {
+ shost_printk(KERN_INFO, sdev->host,
+ "scsi scan: INQUIRY result too short (%d),"
+ " using 36\n", sdev->inquiry_len);
+ sdev->host->short_inquiry = 1;
+ }
+ sdev->inquiry_len = 36;
+ }
+
+ /*
+ * Related to the above issue:
+ *
+ * XXX Devices (disk or all?) should be sent a TEST UNIT READY,
+ * and if not ready, sent a START_STOP to start (maybe spin up) and
+ * then send the INQUIRY again, since the INQUIRY can change after
+ * a device is initialized.
+ *
+ * Ideally, start a device if explicitly asked to do so. This
+ * assumes that a device is spun up on power on, spun down on
+ * request, and then spun up on request.
+ */
+
+ /*
+ * The scanning code needs to know the scsi_level, even if no
+ * device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so
+ * non-zero LUNs can be scanned.
+ */
+ sdev->scsi_level = inq_result[2] & 0x07;
+ if (sdev->scsi_level >= 2 ||
+ (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1))
+ sdev->scsi_level++;
+ sdev->sdev_target->scsi_level = sdev->scsi_level;
+
+ /*
+ * If SCSI-2 or lower, and if the transport requires it,
+ * store the LUN value in CDB[1].
+ */
+ sdev->lun_in_cdb = 0;
+ if (sdev->scsi_level <= SCSI_2 &&
+ sdev->scsi_level != SCSI_UNKNOWN &&
+ !sdev->host->no_scsi2_lun_in_cdb)
+ sdev->lun_in_cdb = 1;
+
+ return 0;
+}
+
+/**
+ * scsi_add_lun - allocate and fully initialze a scsi_device
+ * @sdev: holds information to be stored in the new scsi_device
+ * @inq_result: holds the result of a previous INQUIRY to the LUN
+ * @bflags: black/white list flag
+ * @async: 1 if this device is being scanned asynchronously
+ *
+ * Description:
+ * Initialize the scsi_device @sdev. Optionally set fields based
+ * on values in *@bflags.
+ *
+ * Return:
+ * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
+ * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
+ **/
+static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
+ blist_flags_t *bflags, int async)
+{
+ int ret;
+
+ /*
+ * XXX do not save the inquiry, since it can change underneath us,
+ * save just vendor/model/rev.
+ *
+ * Rather than save it and have an ioctl that retrieves the saved
+ * value, have an ioctl that executes the same INQUIRY code used
+ * in scsi_probe_lun, let user level programs doing INQUIRY
+ * scanning run at their own risk, or supply a user level program
+ * that can correctly scan.
+ */
+
+ /*
+ * Copy at least 36 bytes of INQUIRY data, so that we don't
+ * dereference unallocated memory when accessing the Vendor,
+ * Product, and Revision strings. Badly behaved devices may set
+ * the INQUIRY Additional Length byte to a small value, indicating
+ * these strings are invalid, but often they contain plausible data
+ * nonetheless. It doesn't matter if the device sent < 36 bytes
+ * total, since scsi_probe_lun() initializes inq_result with 0s.
+ */
+ sdev->inquiry = kmemdup(inq_result,
+ max_t(size_t, sdev->inquiry_len, 36),
+ GFP_KERNEL);
+ if (sdev->inquiry == NULL)
+ return SCSI_SCAN_NO_RESPONSE;
+
+ sdev->vendor = (char *) (sdev->inquiry + 8);
+ sdev->model = (char *) (sdev->inquiry + 16);
+ sdev->rev = (char *) (sdev->inquiry + 32);
+
+ if (strncmp(sdev->vendor, "ATA ", 8) == 0) {
+ /*
+ * sata emulation layer device. This is a hack to work around
+ * the SATL power management specifications which state that
+ * when the SATL detects the device has gone into standby
+ * mode, it shall respond with NOT READY.
+ */
+ sdev->allow_restart = 1;
+ }
+
+ if (*bflags & BLIST_ISROM) {
+ sdev->type = TYPE_ROM;
+ sdev->removable = 1;
+ } else {
+ sdev->type = (inq_result[0] & 0x1f);
+ sdev->removable = (inq_result[1] & 0x80) >> 7;
+
+ /*
+ * some devices may respond with wrong type for
+ * well-known logical units. Force well-known type
+ * to enumerate them correctly.
+ */
+ if (scsi_is_wlun(sdev->lun) && sdev->type != TYPE_WLUN) {
+ sdev_printk(KERN_WARNING, sdev,
+ "%s: correcting incorrect peripheral device type 0x%x for W-LUN 0x%16xhN\n",
+ __func__, sdev->type, (unsigned int)sdev->lun);
+ sdev->type = TYPE_WLUN;
+ }
+
+ }
+
+ if (sdev->type == TYPE_RBC || sdev->type == TYPE_ROM) {
+ /* RBC and MMC devices can return SCSI-3 compliance and yet
+ * still not support REPORT LUNS, so make them act as
+ * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+ * specifically set */
+ if ((*bflags & BLIST_REPORTLUN2) == 0)
+ *bflags |= BLIST_NOREPORTLUN;
+ }
+
+ /*
+ * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
+ * spec says: The device server is capable of supporting the
+ * specified peripheral device type on this logical unit. However,
+ * the physical device is not currently connected to this logical
+ * unit.
+ *
+ * The above is vague, as it implies that we could treat 001 and
+ * 011 the same. Stay compatible with previous code, and create a
+ * scsi_device for a PQ of 1
+ *
+ * Don't set the device offline here; rather let the upper
+ * level drivers eval the PQ to decide whether they should
+ * attach. So remove ((inq_result[0] >> 5) & 7) == 1 check.
+ */
+
+ sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
+ sdev->lockable = sdev->removable;
+ sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
+
+ if (sdev->scsi_level >= SCSI_3 ||
+ (sdev->inquiry_len > 56 && inq_result[56] & 0x04))
+ sdev->ppr = 1;
+ if (inq_result[7] & 0x60)
+ sdev->wdtr = 1;
+ if (inq_result[7] & 0x10)
+ sdev->sdtr = 1;
+
+ sdev_printk(KERN_NOTICE, sdev, "%s %.8s %.16s %.4s PQ: %d "
+ "ANSI: %d%s\n", scsi_device_type(sdev->type),
+ sdev->vendor, sdev->model, sdev->rev,
+ sdev->inq_periph_qual, inq_result[2] & 0x07,
+ (inq_result[3] & 0x0f) == 1 ? " CCS" : "");
+
+ if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
+ !(*bflags & BLIST_NOTQ)) {
+ sdev->tagged_supported = 1;
+ sdev->simple_tags = 1;
+ }
+
+ /*
+ * Some devices (Texel CD ROM drives) have handshaking problems
+ * when used with the Seagate controllers. borken is initialized
+ * to 1, and then set it to 0 here.
+ */
+ if ((*bflags & BLIST_BORKEN) == 0)
+ sdev->borken = 0;
+
+ if (*bflags & BLIST_NO_ULD_ATTACH)
+ sdev->no_uld_attach = 1;
+
+ /*
+ * Apparently some really broken devices (contrary to the SCSI
+ * standards) need to be selected without asserting ATN
+ */
+ if (*bflags & BLIST_SELECT_NO_ATN)
+ sdev->select_no_atn = 1;
+
+ /*
+ * Maximum 512 sector transfer length
+ * broken RA4x00 Compaq Disk Array
+ */
+ if (*bflags & BLIST_MAX_512)
+ blk_queue_max_hw_sectors(sdev->request_queue, 512);
+ /*
+ * Max 1024 sector transfer length for targets that report incorrect
+ * max/optimal lengths and relied on the old block layer safe default
+ */
+ else if (*bflags & BLIST_MAX_1024)
+ blk_queue_max_hw_sectors(sdev->request_queue, 1024);
+
+ /*
+ * Some devices may not want to have a start command automatically
+ * issued when a device is added.
+ */
+ if (*bflags & BLIST_NOSTARTONADD)
+ sdev->no_start_on_add = 1;
+
+ if (*bflags & BLIST_SINGLELUN)
+ scsi_target(sdev)->single_lun = 1;
+
+ sdev->use_10_for_rw = 1;
+
+ /* some devices don't like REPORT SUPPORTED OPERATION CODES
+ * and will simply timeout causing sd_mod init to take a very
+ * very long time */
+ if (*bflags & BLIST_NO_RSOC)
+ sdev->no_report_opcodes = 1;
+
+ /* set the device running here so that slave configure
+ * may do I/O */
+ mutex_lock(&sdev->state_mutex);
+ ret = scsi_device_set_state(sdev, SDEV_RUNNING);
+ if (ret)
+ ret = scsi_device_set_state(sdev, SDEV_BLOCK);
+ mutex_unlock(&sdev->state_mutex);
+
+ if (ret) {
+ sdev_printk(KERN_ERR, sdev,
+ "in wrong state %s to complete scan\n",
+ scsi_device_state_name(sdev->sdev_state));
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+
+ if (*bflags & BLIST_NOT_LOCKABLE)
+ sdev->lockable = 0;
+
+ if (*bflags & BLIST_RETRY_HWERROR)
+ sdev->retry_hwerror = 1;
+
+ if (*bflags & BLIST_NO_DIF)
+ sdev->no_dif = 1;
+
+ if (*bflags & BLIST_UNMAP_LIMIT_WS)
+ sdev->unmap_limit_for_ws = 1;
+
+ if (*bflags & BLIST_IGN_MEDIA_CHANGE)
+ sdev->ignore_media_change = 1;
+
+ sdev->eh_timeout = SCSI_DEFAULT_EH_TIMEOUT;
+
+ if (*bflags & BLIST_TRY_VPD_PAGES)
+ sdev->try_vpd_pages = 1;
+ else if (*bflags & BLIST_SKIP_VPD_PAGES)
+ sdev->skip_vpd_pages = 1;
+
+ if (*bflags & BLIST_NO_VPD_SIZE)
+ sdev->no_vpd_size = 1;
+
+ transport_configure_device(&sdev->sdev_gendev);
+
+ if (sdev->host->hostt->slave_configure) {
+ ret = sdev->host->hostt->slave_configure(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+ */
+ if (ret != -ENXIO) {
+ sdev_printk(KERN_ERR, sdev,
+ "failed to configure device\n");
+ }
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+
+ /*
+ * The queue_depth is often changed in ->slave_configure.
+ * Set up budget map again since memory consumption of
+ * the map depends on actual queue depth.
+ */
+ scsi_realloc_sdev_budget_map(sdev, sdev->queue_depth);
+ }
+
+ if (sdev->scsi_level >= SCSI_3)
+ scsi_attach_vpd(sdev);
+
+ sdev->max_queue_depth = sdev->queue_depth;
+ WARN_ON_ONCE(sdev->max_queue_depth > sdev->budget_map.depth);
+ sdev->sdev_bflags = *bflags;
+
+ /*
+ * Ok, the device is now all set up, we can
+ * register it and tell the rest of the kernel
+ * about it.
+ */
+ if (!async && scsi_sysfs_add_sdev(sdev) != 0)
+ return SCSI_SCAN_NO_RESPONSE;
+
+ return SCSI_SCAN_LUN_PRESENT;
+}
+
+#ifdef CONFIG_SCSI_LOGGING
+/**
+ * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace
+ * @buf: Output buffer with at least end-first+1 bytes of space
+ * @inq: Inquiry buffer (input)
+ * @first: Offset of string into inq
+ * @end: Index after last character in inq
+ */
+static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq,
+ unsigned first, unsigned end)
+{
+ unsigned term = 0, idx;
+
+ for (idx = 0; idx + first < end && idx + first < inq[4] + 5; idx++) {
+ if (inq[idx+first] > ' ') {
+ buf[idx] = inq[idx+first];
+ term = idx+1;
+ } else {
+ buf[idx] = ' ';
+ }
+ }
+ buf[term] = 0;
+ return buf;
+}
+#endif
+
+/**
+ * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
+ * @starget: pointer to target device structure
+ * @lun: LUN of target device
+ * @bflagsp: store bflags here if not NULL
+ * @sdevp: probe the LUN corresponding to this scsi_device
+ * @rescan: if not equal to SCSI_SCAN_INITIAL skip some code only
+ * needed on first scan
+ * @hostdata: passed to scsi_alloc_sdev()
+ *
+ * Description:
+ * Call scsi_probe_lun, if a LUN with an attached device is found,
+ * allocate and set it up by calling scsi_add_lun.
+ *
+ * Return:
+ *
+ * - SCSI_SCAN_NO_RESPONSE: could not allocate or setup a scsi_device
+ * - SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
+ * attached at the LUN
+ * - SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
+ **/
+static int scsi_probe_and_add_lun(struct scsi_target *starget,
+ u64 lun, blist_flags_t *bflagsp,
+ struct scsi_device **sdevp,
+ enum scsi_scan_mode rescan,
+ void *hostdata)
+{
+ struct scsi_device *sdev;
+ unsigned char *result;
+ blist_flags_t bflags;
+ int res = SCSI_SCAN_NO_RESPONSE, result_len = 256;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+
+ /*
+ * The rescan flag is used as an optimization, the first scan of a
+ * host adapter calls into here with rescan == 0.
+ */
+ sdev = scsi_device_lookup_by_target(starget, lun);
+ if (sdev) {
+ if (rescan != SCSI_SCAN_INITIAL || !scsi_device_created(sdev)) {
+ SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
+ "scsi scan: device exists on %s\n",
+ dev_name(&sdev->sdev_gendev)));
+ if (sdevp)
+ *sdevp = sdev;
+ else
+ scsi_device_put(sdev);
+
+ if (bflagsp)
+ *bflagsp = scsi_get_device_flags(sdev,
+ sdev->vendor,
+ sdev->model);
+ return SCSI_SCAN_LUN_PRESENT;
+ }
+ scsi_device_put(sdev);
+ } else
+ sdev = scsi_alloc_sdev(starget, lun, hostdata);
+ if (!sdev)
+ goto out;
+
+ result = kmalloc(result_len, GFP_KERNEL);
+ if (!result)
+ goto out_free_sdev;
+
+ if (scsi_probe_lun(sdev, result, result_len, &bflags))
+ goto out_free_result;
+
+ if (bflagsp)
+ *bflagsp = bflags;
+ /*
+ * result contains valid SCSI INQUIRY data.
+ */
+ if ((result[0] >> 5) == 3) {
+ /*
+ * For a Peripheral qualifier 3 (011b), the SCSI
+ * spec says: The device server is not capable of
+ * supporting a physical device on this logical
+ * unit.
+ *
+ * For disks, this implies that there is no
+ * logical disk configured at sdev->lun, but there
+ * is a target id responding.
+ */
+ SCSI_LOG_SCAN_BUS(2, sdev_printk(KERN_INFO, sdev, "scsi scan:"
+ " peripheral qualifier of 3, device not"
+ " added\n"))
+ if (lun == 0) {
+ SCSI_LOG_SCAN_BUS(1, {
+ unsigned char vend[9];
+ unsigned char mod[17];
+
+ sdev_printk(KERN_INFO, sdev,
+ "scsi scan: consider passing scsi_mod."
+ "dev_flags=%s:%s:0x240 or 0x1000240\n",
+ scsi_inq_str(vend, result, 8, 16),
+ scsi_inq_str(mod, result, 16, 32));
+ });
+
+ }
+
+ res = SCSI_SCAN_TARGET_PRESENT;
+ goto out_free_result;
+ }
+
+ /*
+ * Some targets may set slight variations of PQ and PDT to signal
+ * that no LUN is present, so don't add sdev in these cases.
+ * Two specific examples are:
+ * 1) NetApp targets: return PQ=1, PDT=0x1f
+ * 2) USB UFI: returns PDT=0x1f, with the PQ bits being "reserved"
+ * in the UFI 1.0 spec (we cannot rely on reserved bits).
+ *
+ * References:
+ * 1) SCSI SPC-3, pp. 145-146
+ * PQ=1: "A peripheral device having the specified peripheral
+ * device type is not connected to this logical unit. However, the
+ * device server is capable of supporting the specified peripheral
+ * device type on this logical unit."
+ * PDT=0x1f: "Unknown or no device type"
+ * 2) USB UFI 1.0, p. 20
+ * PDT=00h Direct-access device (floppy)
+ * PDT=1Fh none (no FDD connected to the requested logical unit)
+ */
+ if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
+ (result[0] & 0x1f) == 0x1f &&
+ !scsi_is_wlun(lun)) {
+ SCSI_LOG_SCAN_BUS(3, sdev_printk(KERN_INFO, sdev,
+ "scsi scan: peripheral device type"
+ " of 31, no device added\n"));
+ res = SCSI_SCAN_TARGET_PRESENT;
+ goto out_free_result;
+ }
+
+ res = scsi_add_lun(sdev, result, &bflags, shost->async_scan);
+ if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (bflags & BLIST_KEY) {
+ sdev->lockable = 0;
+ scsi_unlock_floptical(sdev, result);
+ }
+ }
+
+ out_free_result:
+ kfree(result);
+ out_free_sdev:
+ if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (sdevp) {
+ if (scsi_device_get(sdev) == 0) {
+ *sdevp = sdev;
+ } else {
+ __scsi_remove_device(sdev);
+ res = SCSI_SCAN_NO_RESPONSE;
+ }
+ }
+ } else
+ __scsi_remove_device(sdev);
+ out:
+ return res;
+}
+
+/**
+ * scsi_sequential_lun_scan - sequentially scan a SCSI target
+ * @starget: pointer to target structure to scan
+ * @bflags: black/white list flag for LUN 0
+ * @scsi_level: Which version of the standard does this device adhere to
+ * @rescan: passed to scsi_probe_add_lun()
+ *
+ * Description:
+ * Generally, scan from LUN 1 (LUN 0 is assumed to already have been
+ * scanned) to some maximum lun until a LUN is found with no device
+ * attached. Use the bflags to figure out any oddities.
+ *
+ * Modifies sdevscan->lun.
+ **/
+static void scsi_sequential_lun_scan(struct scsi_target *starget,
+ blist_flags_t bflags, int scsi_level,
+ enum scsi_scan_mode rescan)
+{
+ uint max_dev_lun;
+ u64 sparse_lun, lun;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+
+ SCSI_LOG_SCAN_BUS(3, starget_printk(KERN_INFO, starget,
+ "scsi scan: Sequential scan\n"));
+
+ max_dev_lun = min(max_scsi_luns, shost->max_lun);
+ /*
+ * If this device is known to support sparse multiple units,
+ * override the other settings, and scan all of them. Normally,
+ * SCSI-3 devices should be scanned via the REPORT LUNS.
+ */
+ if (bflags & BLIST_SPARSELUN) {
+ max_dev_lun = shost->max_lun;
+ sparse_lun = 1;
+ } else
+ sparse_lun = 0;
+
+ /*
+ * If less than SCSI_1_CCS, and no special lun scanning, stop
+ * scanning; this matches 2.4 behaviour, but could just be a bug
+ * (to continue scanning a SCSI_1_CCS device).
+ *
+ * This test is broken. We might not have any device on lun0 for
+ * a sparselun device, and if that's the case then how would we
+ * know the real scsi_level, eh? It might make sense to just not
+ * scan any SCSI_1 device for non-0 luns, but that check would best
+ * go into scsi_alloc_sdev() and just have it return null when asked
+ * to alloc an sdev for lun > 0 on an already found SCSI_1 device.
+ *
+ if ((sdevscan->scsi_level < SCSI_1_CCS) &&
+ ((bflags & (BLIST_FORCELUN | BLIST_SPARSELUN | BLIST_MAX5LUN))
+ == 0))
+ return;
+ */
+ /*
+ * If this device is known to support multiple units, override
+ * the other settings, and scan all of them.
+ */
+ if (bflags & BLIST_FORCELUN)
+ max_dev_lun = shost->max_lun;
+ /*
+ * REGAL CDC-4X: avoid hang after LUN 4
+ */
+ if (bflags & BLIST_MAX5LUN)
+ max_dev_lun = min(5U, max_dev_lun);
+ /*
+ * Do not scan SCSI-2 or lower device past LUN 7, unless
+ * BLIST_LARGELUN.
+ */
+ if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN))
+ max_dev_lun = min(8U, max_dev_lun);
+ else
+ max_dev_lun = min(256U, max_dev_lun);
+
+ /*
+ * We have already scanned LUN 0, so start at LUN 1. Keep scanning
+ * until we reach the max, or no LUN is found and we are not
+ * sparse_lun.
+ */
+ for (lun = 1; lun < max_dev_lun; ++lun)
+ if ((scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan,
+ NULL) != SCSI_SCAN_LUN_PRESENT) &&
+ !sparse_lun)
+ return;
+}
+
+/**
+ * scsi_report_lun_scan - Scan using SCSI REPORT LUN results
+ * @starget: which target
+ * @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN
+ * @rescan: nonzero if we can skip code only needed on first scan
+ *
+ * Description:
+ * Fast scanning for modern (SCSI-3) devices by sending a REPORT LUN command.
+ * Scan the resulting list of LUNs by calling scsi_probe_and_add_lun.
+ *
+ * If BLINK_REPORTLUN2 is set, scan a target that supports more than 8
+ * LUNs even if it's older than SCSI-3.
+ * If BLIST_NOREPORTLUN is set, return 1 always.
+ * If BLIST_NOLUN is set, return 0 always.
+ * If starget->no_report_luns is set, return 1 always.
+ *
+ * Return:
+ * 0: scan completed (or no memory, so further scanning is futile)
+ * 1: could not scan with REPORT LUN
+ **/
+static int scsi_report_lun_scan(struct scsi_target *starget, blist_flags_t bflags,
+ enum scsi_scan_mode rescan)
+{
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+ unsigned int length;
+ u64 lun;
+ unsigned int num_luns;
+ unsigned int retries;
+ int result;
+ struct scsi_lun *lunp, *lun_data;
+ struct scsi_sense_hdr sshdr;
+ struct scsi_device *sdev;
+ struct Scsi_Host *shost = dev_to_shost(&starget->dev);
+ int ret = 0;
+
+ /*
+ * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
+ * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
+ * support more than 8 LUNs.
+ * Don't attempt if the target doesn't support REPORT LUNS.
+ */
+ if (bflags & BLIST_NOREPORTLUN)
+ return 1;
+ if (starget->scsi_level < SCSI_2 &&
+ starget->scsi_level != SCSI_UNKNOWN)
+ return 1;
+ if (starget->scsi_level < SCSI_3 &&
+ (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8))
+ return 1;
+ if (bflags & BLIST_NOLUN)
+ return 0;
+ if (starget->no_report_luns)
+ return 1;
+
+ if (!(sdev = scsi_device_lookup_by_target(starget, 0))) {
+ sdev = scsi_alloc_sdev(starget, 0, NULL);
+ if (!sdev)
+ return 0;
+ if (scsi_device_get(sdev)) {
+ __scsi_remove_device(sdev);
+ return 0;
+ }
+ }
+
+ /*
+ * Allocate enough to hold the header (the same size as one scsi_lun)
+ * plus the number of luns we are requesting. 511 was the default
+ * value of the now removed max_report_luns parameter.
+ */
+ length = (511 + 1) * sizeof(struct scsi_lun);
+retry:
+ lun_data = kmalloc(length, GFP_KERNEL);
+ if (!lun_data) {
+ printk(ALLOC_FAILURE_MSG, __func__);
+ goto out;
+ }
+
+ scsi_cmd[0] = REPORT_LUNS;
+
+ /*
+ * bytes 1 - 5: reserved, set to zero.
+ */
+ memset(&scsi_cmd[1], 0, 5);
+
+ /*
+ * bytes 6 - 9: length of the command.
+ */
+ put_unaligned_be32(length, &scsi_cmd[6]);
+
+ scsi_cmd[10] = 0; /* reserved */
+ scsi_cmd[11] = 0; /* control */
+
+ /*
+ * We can get a UNIT ATTENTION, for example a power on/reset, so
+ * retry a few times (like sd.c does for TEST UNIT READY).
+ * Experience shows some combinations of adapter/devices get at
+ * least two power on/resets.
+ *
+ * Illegal requests (for devices that do not support REPORT LUNS)
+ * should come through as a check condition, and will not generate
+ * a retry.
+ */
+ for (retries = 0; retries < 3; retries++) {
+ SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+ "scsi scan: Sending REPORT LUNS to (try %d)\n",
+ retries));
+
+ result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
+ lun_data, length, &sshdr,
+ SCSI_REPORT_LUNS_TIMEOUT, 3, NULL);
+
+ SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+ "scsi scan: REPORT LUNS"
+ " %s (try %d) result 0x%x\n",
+ result ? "failed" : "successful",
+ retries, result));
+ if (result == 0)
+ break;
+ else if (scsi_sense_valid(&sshdr)) {
+ if (sshdr.sense_key != UNIT_ATTENTION)
+ break;
+ }
+ }
+
+ if (result) {
+ /*
+ * The device probably does not support a REPORT LUN command
+ */
+ ret = 1;
+ goto out_err;
+ }
+
+ /*
+ * Get the length from the first four bytes of lun_data.
+ */
+ if (get_unaligned_be32(lun_data->scsi_lun) +
+ sizeof(struct scsi_lun) > length) {
+ length = get_unaligned_be32(lun_data->scsi_lun) +
+ sizeof(struct scsi_lun);
+ kfree(lun_data);
+ goto retry;
+ }
+ length = get_unaligned_be32(lun_data->scsi_lun);
+
+ num_luns = (length / sizeof(struct scsi_lun));
+
+ SCSI_LOG_SCAN_BUS(3, sdev_printk (KERN_INFO, sdev,
+ "scsi scan: REPORT LUN scan\n"));
+
+ /*
+ * Scan the luns in lun_data. The entry at offset 0 is really
+ * the header, so start at 1 and go up to and including num_luns.
+ */
+ for (lunp = &lun_data[1]; lunp <= &lun_data[num_luns]; lunp++) {
+ lun = scsilun_to_int(lunp);
+
+ if (lun > sdev->host->max_lun) {
+ sdev_printk(KERN_WARNING, sdev,
+ "lun%llu has a LUN larger than"
+ " allowed by the host adapter\n", lun);
+ } else {
+ int res;
+
+ res = scsi_probe_and_add_lun(starget,
+ lun, NULL, NULL, rescan, NULL);
+ if (res == SCSI_SCAN_NO_RESPONSE) {
+ /*
+ * Got some results, but now none, abort.
+ */
+ sdev_printk(KERN_ERR, sdev,
+ "Unexpected response"
+ " from lun %llu while scanning, scan"
+ " aborted\n", (unsigned long long)lun);
+ break;
+ }
+ }
+ }
+
+ out_err:
+ kfree(lun_data);
+ out:
+ if (scsi_device_created(sdev))
+ /*
+ * the sdev we used didn't appear in the report luns scan
+ */
+ __scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ return ret;
+}
+
+struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
+ uint id, u64 lun, void *hostdata)
+{
+ struct scsi_device *sdev = ERR_PTR(-ENODEV);
+ struct device *parent = &shost->shost_gendev;
+ struct scsi_target *starget;
+
+ if (strncmp(scsi_scan_type, "none", 4) == 0)
+ return ERR_PTR(-ENODEV);
+
+ starget = scsi_alloc_target(parent, channel, id);
+ if (!starget)
+ return ERR_PTR(-ENOMEM);
+ scsi_autopm_get_target(starget);
+
+ mutex_lock(&shost->scan_mutex);
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
+ if (scsi_host_scan_allowed(shost) && scsi_autopm_get_host(shost) == 0) {
+ scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
+ scsi_autopm_put_host(shost);
+ }
+ mutex_unlock(&shost->scan_mutex);
+ scsi_autopm_put_target(starget);
+ /*
+ * paired with scsi_alloc_target(). Target will be destroyed unless
+ * scsi_probe_and_add_lun made an underlying device visible
+ */
+ scsi_target_reap(starget);
+ put_device(&starget->dev);
+
+ return sdev;
+}
+EXPORT_SYMBOL(__scsi_add_device);
+
+int scsi_add_device(struct Scsi_Host *host, uint channel,
+ uint target, u64 lun)
+{
+ struct scsi_device *sdev =
+ __scsi_add_device(host, channel, target, lun, NULL);
+ if (IS_ERR(sdev))
+ return PTR_ERR(sdev);
+
+ scsi_device_put(sdev);
+ return 0;
+}
+EXPORT_SYMBOL(scsi_add_device);
+
+int scsi_rescan_device(struct scsi_device *sdev)
+{
+ struct device *dev = &sdev->sdev_gendev;
+ int ret = 0;
+
+ device_lock(dev);
+
+ /*
+ * Bail out if the device or its queue are not running. Otherwise,
+ * the rescan may block waiting for commands to be executed, with us
+ * holding the device lock. This can result in a potential deadlock
+ * in the power management core code when system resume is on-going.
+ */
+ if (sdev->sdev_state != SDEV_RUNNING ||
+ blk_queue_pm_only(sdev->request_queue)) {
+ ret = -EWOULDBLOCK;
+ goto unlock;
+ }
+
+ scsi_attach_vpd(sdev);
+
+ if (sdev->handler && sdev->handler->rescan)
+ sdev->handler->rescan(sdev);
+
+ if (dev->driver && try_module_get(dev->driver->owner)) {
+ struct scsi_driver *drv = to_scsi_driver(dev->driver);
+
+ if (drv->rescan)
+ drv->rescan(dev);
+ module_put(dev->driver->owner);
+ }
+
+unlock:
+ device_unlock(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL(scsi_rescan_device);
+
+static void __scsi_scan_target(struct device *parent, unsigned int channel,
+ unsigned int id, u64 lun, enum scsi_scan_mode rescan)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ blist_flags_t bflags = 0;
+ int res;
+ struct scsi_target *starget;
+
+ if (shost->this_id == id)
+ /*
+ * Don't scan the host adapter
+ */
+ return;
+
+ starget = scsi_alloc_target(parent, channel, id);
+ if (!starget)
+ return;
+ scsi_autopm_get_target(starget);
+
+ if (lun != SCAN_WILD_CARD) {
+ /*
+ * Scan for a specific host/chan/id/lun.
+ */
+ scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan, NULL);
+ goto out_reap;
+ }
+
+ /*
+ * Scan LUN 0, if there is some response, scan further. Ideally, we
+ * would not configure LUN 0 until all LUNs are scanned.
+ */
+ res = scsi_probe_and_add_lun(starget, 0, &bflags, NULL, rescan, NULL);
+ if (res == SCSI_SCAN_LUN_PRESENT || res == SCSI_SCAN_TARGET_PRESENT) {
+ if (scsi_report_lun_scan(starget, bflags, rescan) != 0)
+ /*
+ * The REPORT LUN did not scan the target,
+ * do a sequential scan.
+ */
+ scsi_sequential_lun_scan(starget, bflags,
+ starget->scsi_level, rescan);
+ }
+
+ out_reap:
+ scsi_autopm_put_target(starget);
+ /*
+ * paired with scsi_alloc_target(): determine if the target has
+ * any children at all and if not, nuke it
+ */
+ scsi_target_reap(starget);
+
+ put_device(&starget->dev);
+}
+
+/**
+ * scsi_scan_target - scan a target id, possibly including all LUNs on the target.
+ * @parent: host to scan
+ * @channel: channel to scan
+ * @id: target id to scan
+ * @lun: Specific LUN to scan or SCAN_WILD_CARD
+ * @rescan: passed to LUN scanning routines; SCSI_SCAN_INITIAL for
+ * no rescan, SCSI_SCAN_RESCAN to rescan existing LUNs,
+ * and SCSI_SCAN_MANUAL to force scanning even if
+ * 'scan=manual' is set.
+ *
+ * Description:
+ * Scan the target id on @parent, @channel, and @id. Scan at least LUN 0,
+ * and possibly all LUNs on the target id.
+ *
+ * First try a REPORT LUN scan, if that does not scan the target, do a
+ * sequential scan of LUNs on the target id.
+ **/
+void scsi_scan_target(struct device *parent, unsigned int channel,
+ unsigned int id, u64 lun, enum scsi_scan_mode rescan)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+
+ if (strncmp(scsi_scan_type, "none", 4) == 0)
+ return;
+
+ if (rescan != SCSI_SCAN_MANUAL &&
+ strncmp(scsi_scan_type, "manual", 6) == 0)
+ return;
+
+ mutex_lock(&shost->scan_mutex);
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
+ if (scsi_host_scan_allowed(shost) && scsi_autopm_get_host(shost) == 0) {
+ __scsi_scan_target(parent, channel, id, lun, rescan);
+ scsi_autopm_put_host(shost);
+ }
+ mutex_unlock(&shost->scan_mutex);
+}
+EXPORT_SYMBOL(scsi_scan_target);
+
+static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
+ unsigned int id, u64 lun,
+ enum scsi_scan_mode rescan)
+{
+ uint order_id;
+
+ if (id == SCAN_WILD_CARD)
+ for (id = 0; id < shost->max_id; ++id) {
+ /*
+ * XXX adapter drivers when possible (FCP, iSCSI)
+ * could modify max_id to match the current max,
+ * not the absolute max.
+ *
+ * XXX add a shost id iterator, so for example,
+ * the FC ID can be the same as a target id
+ * without a huge overhead of sparse id's.
+ */
+ if (shost->reverse_ordering)
+ /*
+ * Scan from high to low id.
+ */
+ order_id = shost->max_id - id - 1;
+ else
+ order_id = id;
+ __scsi_scan_target(&shost->shost_gendev, channel,
+ order_id, lun, rescan);
+ }
+ else
+ __scsi_scan_target(&shost->shost_gendev, channel,
+ id, lun, rescan);
+}
+
+int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
+ unsigned int id, u64 lun,
+ enum scsi_scan_mode rescan)
+{
+ SCSI_LOG_SCAN_BUS(3, shost_printk (KERN_INFO, shost,
+ "%s: <%u:%u:%llu>\n",
+ __func__, channel, id, lun));
+
+ if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
+ ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
+ ((lun != SCAN_WILD_CARD) && (lun >= shost->max_lun)))
+ return -EINVAL;
+
+ mutex_lock(&shost->scan_mutex);
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
+ if (scsi_host_scan_allowed(shost) && scsi_autopm_get_host(shost) == 0) {
+ if (channel == SCAN_WILD_CARD)
+ for (channel = 0; channel <= shost->max_channel;
+ channel++)
+ scsi_scan_channel(shost, channel, id, lun,
+ rescan);
+ else
+ scsi_scan_channel(shost, channel, id, lun, rescan);
+ scsi_autopm_put_host(shost);
+ }
+ mutex_unlock(&shost->scan_mutex);
+
+ return 0;
+}
+
+static void scsi_sysfs_add_devices(struct Scsi_Host *shost)
+{
+ struct scsi_device *sdev;
+ shost_for_each_device(sdev, shost) {
+ /* target removed before the device could be added */
+ if (sdev->sdev_state == SDEV_DEL)
+ continue;
+ /* If device is already visible, skip adding it to sysfs */
+ if (sdev->is_visible)
+ continue;
+ if (!scsi_host_scan_allowed(shost) ||
+ scsi_sysfs_add_sdev(sdev) != 0)
+ __scsi_remove_device(sdev);
+ }
+}
+
+/**
+ * scsi_prep_async_scan - prepare for an async scan
+ * @shost: the host which will be scanned
+ * Returns: a cookie to be passed to scsi_finish_async_scan()
+ *
+ * Tells the midlayer this host is going to do an asynchronous scan.
+ * It reserves the host's position in the scanning list and ensures
+ * that other asynchronous scans started after this one won't affect the
+ * ordering of the discovered devices.
+ */
+static struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
+{
+ struct async_scan_data *data = NULL;
+ unsigned long flags;
+
+ if (strncmp(scsi_scan_type, "sync", 4) == 0)
+ return NULL;
+
+ mutex_lock(&shost->scan_mutex);
+ if (shost->async_scan) {
+ shost_printk(KERN_DEBUG, shost, "%s called twice\n", __func__);
+ goto err;
+ }
+
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ goto err;
+ data->shost = scsi_host_get(shost);
+ if (!data->shost)
+ goto err;
+ init_completion(&data->prev_finished);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ shost->async_scan = 1;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ mutex_unlock(&shost->scan_mutex);
+
+ spin_lock(&async_scan_lock);
+ if (list_empty(&scanning_hosts))
+ complete(&data->prev_finished);
+ list_add_tail(&data->list, &scanning_hosts);
+ spin_unlock(&async_scan_lock);
+
+ return data;
+
+ err:
+ mutex_unlock(&shost->scan_mutex);
+ kfree(data);
+ return NULL;
+}
+
+/**
+ * scsi_finish_async_scan - asynchronous scan has finished
+ * @data: cookie returned from earlier call to scsi_prep_async_scan()
+ *
+ * All the devices currently attached to this host have been found.
+ * This function announces all the devices it has found to the rest
+ * of the system.
+ */
+static void scsi_finish_async_scan(struct async_scan_data *data)
+{
+ struct Scsi_Host *shost;
+ unsigned long flags;
+
+ if (!data)
+ return;
+
+ shost = data->shost;
+
+ mutex_lock(&shost->scan_mutex);
+
+ if (!shost->async_scan) {
+ shost_printk(KERN_INFO, shost, "%s called twice\n", __func__);
+ dump_stack();
+ mutex_unlock(&shost->scan_mutex);
+ return;
+ }
+
+ wait_for_completion(&data->prev_finished);
+
+ scsi_sysfs_add_devices(shost);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ shost->async_scan = 0;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ mutex_unlock(&shost->scan_mutex);
+
+ spin_lock(&async_scan_lock);
+ list_del(&data->list);
+ if (!list_empty(&scanning_hosts)) {
+ struct async_scan_data *next = list_entry(scanning_hosts.next,
+ struct async_scan_data, list);
+ complete(&next->prev_finished);
+ }
+ spin_unlock(&async_scan_lock);
+
+ scsi_autopm_put_host(shost);
+ scsi_host_put(shost);
+ kfree(data);
+}
+
+static void do_scsi_scan_host(struct Scsi_Host *shost)
+{
+ if (shost->hostt->scan_finished) {
+ unsigned long start = jiffies;
+ if (shost->hostt->scan_start)
+ shost->hostt->scan_start(shost);
+
+ while (!shost->hostt->scan_finished(shost, jiffies - start))
+ msleep(10);
+ } else {
+ scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
+ SCAN_WILD_CARD, 0);
+ }
+}
+
+static void do_scan_async(void *_data, async_cookie_t c)
+{
+ struct async_scan_data *data = _data;
+ struct Scsi_Host *shost = data->shost;
+
+ do_scsi_scan_host(shost);
+ scsi_finish_async_scan(data);
+}
+
+/**
+ * scsi_scan_host - scan the given adapter
+ * @shost: adapter to scan
+ **/
+void scsi_scan_host(struct Scsi_Host *shost)
+{
+ struct async_scan_data *data;
+
+ if (strncmp(scsi_scan_type, "none", 4) == 0 ||
+ strncmp(scsi_scan_type, "manual", 6) == 0)
+ return;
+ if (scsi_autopm_get_host(shost) < 0)
+ return;
+
+ data = scsi_prep_async_scan(shost);
+ if (!data) {
+ do_scsi_scan_host(shost);
+ scsi_autopm_put_host(shost);
+ return;
+ }
+
+ /* register with the async subsystem so wait_for_device_probe()
+ * will flush this work
+ */
+ async_schedule(do_scan_async, data);
+
+ /* scsi_autopm_put_host(shost) is called in scsi_finish_async_scan() */
+}
+EXPORT_SYMBOL(scsi_scan_host);
+
+void scsi_forget_host(struct Scsi_Host *shost)
+{
+ struct scsi_device *sdev;
+ unsigned long flags;
+
+ restart:
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_for_each_entry(sdev, &shost->__devices, siblings) {
+ if (sdev->sdev_state == SDEV_DEL)
+ continue;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ __scsi_remove_device(sdev);
+ goto restart;
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+