summaryrefslogtreecommitdiffstats
path: root/drivers/soc/bcm
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/soc/bcm')
-rw-r--r--drivers/soc/bcm/Kconfig48
-rw-r--r--drivers/soc/bcm/Makefile5
-rw-r--r--drivers/soc/bcm/bcm2835-power.c720
-rw-r--r--drivers/soc/bcm/bcm63xx/Kconfig21
-rw-r--r--drivers/soc/bcm/bcm63xx/Makefile3
-rw-r--r--drivers/soc/bcm/bcm63xx/bcm-pmb.c364
-rw-r--r--drivers/soc/bcm/bcm63xx/bcm63xx-power.c376
-rw-r--r--drivers/soc/bcm/brcmstb/Kconfig11
-rw-r--r--drivers/soc/bcm/brcmstb/Makefile3
-rw-r--r--drivers/soc/bcm/brcmstb/biuctrl.c364
-rw-r--r--drivers/soc/bcm/brcmstb/common.c113
-rw-r--r--drivers/soc/bcm/brcmstb/pm/Makefile4
-rw-r--r--drivers/soc/bcm/brcmstb/pm/aon_defs.h105
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm-arm.c874
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm-mips.c456
-rw-r--r--drivers/soc/bcm/brcmstb/pm/pm.h81
-rw-r--r--drivers/soc/bcm/brcmstb/pm/s2-arm.S68
-rw-r--r--drivers/soc/bcm/brcmstb/pm/s2-mips.S192
-rw-r--r--drivers/soc/bcm/brcmstb/pm/s3-mips.S138
-rw-r--r--drivers/soc/bcm/raspberrypi-power.c246
20 files changed, 4192 insertions, 0 deletions
diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig
new file mode 100644
index 000000000..24f92a6e8
--- /dev/null
+++ b/drivers/soc/bcm/Kconfig
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Broadcom SoC drivers"
+
+config BCM2835_POWER
+ bool "BCM2835 power domain driver"
+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+ default y if ARCH_BCM2835
+ select PM_GENERIC_DOMAINS if PM
+ select RESET_CONTROLLER
+ help
+ This enables support for the BCM2835 power domains and reset
+ controller. Any usage of power domains by the Raspberry Pi
+ firmware means that Linux usage of the same power domain
+ must be accessed using the RASPBERRYPI_POWER driver
+
+config RASPBERRYPI_POWER
+ bool "Raspberry Pi power domain driver"
+ depends on ARCH_BCM2835 || (COMPILE_TEST && OF)
+ depends on RASPBERRYPI_FIRMWARE=y
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the RPi power domains which can be enabled
+ or disabled via the RPi firmware.
+
+config SOC_BCM63XX
+ bool "Broadcom 63xx SoC drivers"
+ depends on BMIPS_GENERIC || COMPILE_TEST
+ help
+ Enables drivers for the Broadcom 63xx series of chips.
+ Drivers can be enabled individually within this menu.
+
+ If unsure, say N.
+
+config SOC_BRCMSTB
+ bool "Broadcom STB SoC drivers"
+ depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
+ select SOC_BUS
+ help
+ Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
+ This option alone enables only some support code, while the drivers
+ can be enabled individually within this menu.
+
+ If unsure, say N.
+
+source "drivers/soc/bcm/bcm63xx/Kconfig"
+source "drivers/soc/bcm/brcmstb/Kconfig"
+
+endmenu
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
new file mode 100644
index 000000000..0f0efa28d
--- /dev/null
+++ b/drivers/soc/bcm/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o
+obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
+obj-y += bcm63xx/
+obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
new file mode 100644
index 000000000..cbcd1298e
--- /dev/null
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power domain driver for Broadcom BCM2835
+ *
+ * Copyright (C) 2018 Broadcom
+ */
+
+#include <dt-bindings/soc/bcm2835-pm.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/bcm2835-pm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset-controller.h>
+#include <linux/types.h>
+
+#define PM_GNRIC 0x00
+#define PM_AUDIO 0x04
+#define PM_STATUS 0x18
+#define PM_RSTC 0x1c
+#define PM_RSTS 0x20
+#define PM_WDOG 0x24
+#define PM_PADS0 0x28
+#define PM_PADS2 0x2c
+#define PM_PADS3 0x30
+#define PM_PADS4 0x34
+#define PM_PADS5 0x38
+#define PM_PADS6 0x3c
+#define PM_CAM0 0x44
+#define PM_CAM0_LDOHPEN BIT(2)
+#define PM_CAM0_LDOLPEN BIT(1)
+#define PM_CAM0_CTRLEN BIT(0)
+
+#define PM_CAM1 0x48
+#define PM_CAM1_LDOHPEN BIT(2)
+#define PM_CAM1_LDOLPEN BIT(1)
+#define PM_CAM1_CTRLEN BIT(0)
+
+#define PM_CCP2TX 0x4c
+#define PM_CCP2TX_LDOEN BIT(1)
+#define PM_CCP2TX_CTRLEN BIT(0)
+
+#define PM_DSI0 0x50
+#define PM_DSI0_LDOHPEN BIT(2)
+#define PM_DSI0_LDOLPEN BIT(1)
+#define PM_DSI0_CTRLEN BIT(0)
+
+#define PM_DSI1 0x54
+#define PM_DSI1_LDOHPEN BIT(2)
+#define PM_DSI1_LDOLPEN BIT(1)
+#define PM_DSI1_CTRLEN BIT(0)
+
+#define PM_HDMI 0x58
+#define PM_HDMI_RSTDR BIT(19)
+#define PM_HDMI_LDOPD BIT(1)
+#define PM_HDMI_CTRLEN BIT(0)
+
+#define PM_USB 0x5c
+/* The power gates must be enabled with this bit before enabling the LDO in the
+ * USB block.
+ */
+#define PM_USB_CTRLEN BIT(0)
+
+#define PM_PXLDO 0x60
+#define PM_PXBG 0x64
+#define PM_DFT 0x68
+#define PM_SMPS 0x6c
+#define PM_XOSC 0x70
+#define PM_SPAREW 0x74
+#define PM_SPARER 0x78
+#define PM_AVS_RSTDR 0x7c
+#define PM_AVS_STAT 0x80
+#define PM_AVS_EVENT 0x84
+#define PM_AVS_INTEN 0x88
+#define PM_DUMMY 0xfc
+
+#define PM_IMAGE 0x108
+#define PM_GRAFX 0x10c
+#define PM_PROC 0x110
+#define PM_ENAB BIT(12)
+#define PM_ISPRSTN BIT(8)
+#define PM_H264RSTN BIT(7)
+#define PM_PERIRSTN BIT(6)
+#define PM_V3DRSTN BIT(6)
+#define PM_ISFUNC BIT(5)
+#define PM_MRDONE BIT(4)
+#define PM_MEMREP BIT(3)
+#define PM_ISPOW BIT(2)
+#define PM_POWOK BIT(1)
+#define PM_POWUP BIT(0)
+#define PM_INRUSH_SHIFT 13
+#define PM_INRUSH_3_5_MA 0
+#define PM_INRUSH_5_MA 1
+#define PM_INRUSH_10_MA 2
+#define PM_INRUSH_20_MA 3
+#define PM_INRUSH_MASK (3 << PM_INRUSH_SHIFT)
+
+#define PM_PASSWORD 0x5a000000
+
+#define PM_WDOG_TIME_SET 0x000fffff
+#define PM_RSTC_WRCFG_CLR 0xffffffcf
+#define PM_RSTS_HADWRH_SET 0x00000040
+#define PM_RSTC_WRCFG_SET 0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET 0x00000020
+#define PM_RSTC_RESET 0x00000102
+
+#define PM_READ(reg) readl(power->base + (reg))
+#define PM_WRITE(reg, val) writel(PM_PASSWORD | (val), power->base + (reg))
+
+#define ASB_BRDG_VERSION 0x00
+#define ASB_CPR_CTRL 0x04
+
+#define ASB_V3D_S_CTRL 0x08
+#define ASB_V3D_M_CTRL 0x0c
+#define ASB_ISP_S_CTRL 0x10
+#define ASB_ISP_M_CTRL 0x14
+#define ASB_H264_S_CTRL 0x18
+#define ASB_H264_M_CTRL 0x1c
+
+#define ASB_REQ_STOP BIT(0)
+#define ASB_ACK BIT(1)
+#define ASB_EMPTY BIT(2)
+#define ASB_FULL BIT(3)
+
+#define ASB_AXI_BRDG_ID 0x20
+
+#define BCM2835_BRDG_ID 0x62726467
+
+struct bcm2835_power_domain {
+ struct generic_pm_domain base;
+ struct bcm2835_power *power;
+ u32 domain;
+ struct clk *clk;
+};
+
+struct bcm2835_power {
+ struct device *dev;
+ /* PM registers. */
+ void __iomem *base;
+ /* AXI Async bridge registers. */
+ void __iomem *asb;
+ /* RPiVid bridge registers. */
+ void __iomem *rpivid_asb;
+
+ struct genpd_onecell_data pd_xlate;
+ struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
+ struct reset_controller_dev reset;
+};
+
+static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable)
+{
+ void __iomem *base = power->asb;
+ u64 start;
+ u32 val;
+
+ switch (reg) {
+ case 0:
+ return 0;
+ case ASB_V3D_S_CTRL:
+ case ASB_V3D_M_CTRL:
+ if (power->rpivid_asb)
+ base = power->rpivid_asb;
+ break;
+ }
+
+ start = ktime_get_ns();
+
+ /* Enable the module's async AXI bridges. */
+ if (enable) {
+ val = readl(base + reg) & ~ASB_REQ_STOP;
+ } else {
+ val = readl(base + reg) | ASB_REQ_STOP;
+ }
+ writel(PM_PASSWORD | val, base + reg);
+
+ while (!!(readl(base + reg) & ASB_ACK) == enable) {
+ cpu_relax();
+ if (ktime_get_ns() - start >= 1000)
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int bcm2835_asb_enable(struct bcm2835_power *power, u32 reg)
+{
+ return bcm2835_asb_control(power, reg, true);
+}
+
+static int bcm2835_asb_disable(struct bcm2835_power *power, u32 reg)
+{
+ return bcm2835_asb_control(power, reg, false);
+}
+
+static int bcm2835_power_power_off(struct bcm2835_power_domain *pd, u32 pm_reg)
+{
+ struct bcm2835_power *power = pd->power;
+
+ /* We don't run this on BCM2711 */
+ if (power->rpivid_asb)
+ return 0;
+
+ /* Enable functional isolation */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISFUNC);
+
+ /* Enable electrical isolation */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
+
+ /* Open the power switches. */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_POWUP);
+
+ return 0;
+}
+
+static int bcm2835_power_power_on(struct bcm2835_power_domain *pd, u32 pm_reg)
+{
+ struct bcm2835_power *power = pd->power;
+ struct device *dev = power->dev;
+ u64 start;
+ int ret;
+ int inrush;
+ bool powok;
+
+ /* We don't run this on BCM2711 */
+ if (power->rpivid_asb)
+ return 0;
+
+ /* If it was already powered on by the fw, leave it that way. */
+ if (PM_READ(pm_reg) & PM_POWUP)
+ return 0;
+
+ /* Enable power. Allowing too much current at once may result
+ * in POWOK never getting set, so start low and ramp it up as
+ * necessary to succeed.
+ */
+ powok = false;
+ for (inrush = PM_INRUSH_3_5_MA; inrush <= PM_INRUSH_20_MA; inrush++) {
+ PM_WRITE(pm_reg,
+ (PM_READ(pm_reg) & ~PM_INRUSH_MASK) |
+ (inrush << PM_INRUSH_SHIFT) |
+ PM_POWUP);
+
+ start = ktime_get_ns();
+ while (!(powok = !!(PM_READ(pm_reg) & PM_POWOK))) {
+ cpu_relax();
+ if (ktime_get_ns() - start >= 3000)
+ break;
+ }
+ }
+ if (!powok) {
+ dev_err(dev, "Timeout waiting for %s power OK\n",
+ pd->base.name);
+ ret = -ETIMEDOUT;
+ goto err_disable_powup;
+ }
+
+ /* Disable electrical isolation */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISPOW);
+
+ /* Repair memory */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_MEMREP);
+ start = ktime_get_ns();
+ while (!(PM_READ(pm_reg) & PM_MRDONE)) {
+ cpu_relax();
+ if (ktime_get_ns() - start >= 1000) {
+ dev_err(dev, "Timeout waiting for %s memory repair\n",
+ pd->base.name);
+ ret = -ETIMEDOUT;
+ goto err_disable_ispow;
+ }
+ }
+
+ /* Disable functional isolation */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) | PM_ISFUNC);
+
+ return 0;
+
+err_disable_ispow:
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~PM_ISPOW);
+err_disable_powup:
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~(PM_POWUP | PM_INRUSH_MASK));
+ return ret;
+}
+
+static int bcm2835_asb_power_on(struct bcm2835_power_domain *pd,
+ u32 pm_reg,
+ u32 asb_m_reg,
+ u32 asb_s_reg,
+ u32 reset_flags)
+{
+ struct bcm2835_power *power = pd->power;
+ int ret;
+
+ ret = clk_prepare_enable(pd->clk);
+ if (ret) {
+ dev_err(power->dev, "Failed to enable clock for %s\n",
+ pd->base.name);
+ return ret;
+ }
+
+ /* Wait 32 clocks for reset to propagate, 1 us will be enough */
+ udelay(1);
+
+ clk_disable_unprepare(pd->clk);
+
+ /* Deassert the resets. */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) | reset_flags);
+
+ ret = clk_prepare_enable(pd->clk);
+ if (ret) {
+ dev_err(power->dev, "Failed to enable clock for %s\n",
+ pd->base.name);
+ goto err_enable_resets;
+ }
+
+ ret = bcm2835_asb_enable(power, asb_m_reg);
+ if (ret) {
+ dev_err(power->dev, "Failed to enable ASB master for %s\n",
+ pd->base.name);
+ goto err_disable_clk;
+ }
+ ret = bcm2835_asb_enable(power, asb_s_reg);
+ if (ret) {
+ dev_err(power->dev, "Failed to enable ASB slave for %s\n",
+ pd->base.name);
+ goto err_disable_asb_master;
+ }
+
+ return 0;
+
+err_disable_asb_master:
+ bcm2835_asb_disable(power, asb_m_reg);
+err_disable_clk:
+ clk_disable_unprepare(pd->clk);
+err_enable_resets:
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
+ return ret;
+}
+
+static int bcm2835_asb_power_off(struct bcm2835_power_domain *pd,
+ u32 pm_reg,
+ u32 asb_m_reg,
+ u32 asb_s_reg,
+ u32 reset_flags)
+{
+ struct bcm2835_power *power = pd->power;
+ int ret;
+
+ ret = bcm2835_asb_disable(power, asb_s_reg);
+ if (ret) {
+ dev_warn(power->dev, "Failed to disable ASB slave for %s\n",
+ pd->base.name);
+ return ret;
+ }
+ ret = bcm2835_asb_disable(power, asb_m_reg);
+ if (ret) {
+ dev_warn(power->dev, "Failed to disable ASB master for %s\n",
+ pd->base.name);
+ bcm2835_asb_enable(power, asb_s_reg);
+ return ret;
+ }
+
+ clk_disable_unprepare(pd->clk);
+
+ /* Assert the resets. */
+ PM_WRITE(pm_reg, PM_READ(pm_reg) & ~reset_flags);
+
+ return 0;
+}
+
+static int bcm2835_power_pd_power_on(struct generic_pm_domain *domain)
+{
+ struct bcm2835_power_domain *pd =
+ container_of(domain, struct bcm2835_power_domain, base);
+ struct bcm2835_power *power = pd->power;
+
+ switch (pd->domain) {
+ case BCM2835_POWER_DOMAIN_GRAFX:
+ return bcm2835_power_power_on(pd, PM_GRAFX);
+
+ case BCM2835_POWER_DOMAIN_GRAFX_V3D:
+ return bcm2835_asb_power_on(pd, PM_GRAFX,
+ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
+ PM_V3DRSTN);
+
+ case BCM2835_POWER_DOMAIN_IMAGE:
+ return bcm2835_power_power_on(pd, PM_IMAGE);
+
+ case BCM2835_POWER_DOMAIN_IMAGE_PERI:
+ return bcm2835_asb_power_on(pd, PM_IMAGE,
+ 0, 0,
+ PM_PERIRSTN);
+
+ case BCM2835_POWER_DOMAIN_IMAGE_ISP:
+ return bcm2835_asb_power_on(pd, PM_IMAGE,
+ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
+ PM_ISPRSTN);
+
+ case BCM2835_POWER_DOMAIN_IMAGE_H264:
+ return bcm2835_asb_power_on(pd, PM_IMAGE,
+ ASB_H264_M_CTRL, ASB_H264_S_CTRL,
+ PM_H264RSTN);
+
+ case BCM2835_POWER_DOMAIN_USB:
+ PM_WRITE(PM_USB, PM_USB_CTRLEN);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_DSI0:
+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN | PM_DSI0_LDOHPEN);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_DSI1:
+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN | PM_DSI1_LDOHPEN);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_CCP2TX:
+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN | PM_CCP2TX_LDOEN);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_HDMI:
+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_RSTDR);
+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_CTRLEN);
+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_LDOPD);
+ usleep_range(100, 200);
+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_RSTDR);
+ return 0;
+
+ default:
+ dev_err(power->dev, "Invalid domain %d\n", pd->domain);
+ return -EINVAL;
+ }
+}
+
+static int bcm2835_power_pd_power_off(struct generic_pm_domain *domain)
+{
+ struct bcm2835_power_domain *pd =
+ container_of(domain, struct bcm2835_power_domain, base);
+ struct bcm2835_power *power = pd->power;
+
+ switch (pd->domain) {
+ case BCM2835_POWER_DOMAIN_GRAFX:
+ return bcm2835_power_power_off(pd, PM_GRAFX);
+
+ case BCM2835_POWER_DOMAIN_GRAFX_V3D:
+ return bcm2835_asb_power_off(pd, PM_GRAFX,
+ ASB_V3D_M_CTRL, ASB_V3D_S_CTRL,
+ PM_V3DRSTN);
+
+ case BCM2835_POWER_DOMAIN_IMAGE:
+ return bcm2835_power_power_off(pd, PM_IMAGE);
+
+ case BCM2835_POWER_DOMAIN_IMAGE_PERI:
+ return bcm2835_asb_power_off(pd, PM_IMAGE,
+ 0, 0,
+ PM_PERIRSTN);
+
+ case BCM2835_POWER_DOMAIN_IMAGE_ISP:
+ return bcm2835_asb_power_off(pd, PM_IMAGE,
+ ASB_ISP_M_CTRL, ASB_ISP_S_CTRL,
+ PM_ISPRSTN);
+
+ case BCM2835_POWER_DOMAIN_IMAGE_H264:
+ return bcm2835_asb_power_off(pd, PM_IMAGE,
+ ASB_H264_M_CTRL, ASB_H264_S_CTRL,
+ PM_H264RSTN);
+
+ case BCM2835_POWER_DOMAIN_USB:
+ PM_WRITE(PM_USB, 0);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_DSI0:
+ PM_WRITE(PM_DSI0, PM_DSI0_CTRLEN);
+ PM_WRITE(PM_DSI0, 0);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_DSI1:
+ PM_WRITE(PM_DSI1, PM_DSI1_CTRLEN);
+ PM_WRITE(PM_DSI1, 0);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_CCP2TX:
+ PM_WRITE(PM_CCP2TX, PM_CCP2TX_CTRLEN);
+ PM_WRITE(PM_CCP2TX, 0);
+ return 0;
+
+ case BCM2835_POWER_DOMAIN_HDMI:
+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) | PM_HDMI_LDOPD);
+ PM_WRITE(PM_HDMI, PM_READ(PM_HDMI) & ~PM_HDMI_CTRLEN);
+ return 0;
+
+ default:
+ dev_err(power->dev, "Invalid domain %d\n", pd->domain);
+ return -EINVAL;
+ }
+}
+
+static int
+bcm2835_init_power_domain(struct bcm2835_power *power,
+ int pd_xlate_index, const char *name)
+{
+ struct device *dev = power->dev;
+ struct bcm2835_power_domain *dom = &power->domains[pd_xlate_index];
+
+ dom->clk = devm_clk_get(dev->parent, name);
+ if (IS_ERR(dom->clk)) {
+ int ret = PTR_ERR(dom->clk);
+
+ if (ret == -EPROBE_DEFER)
+ return ret;
+
+ /* Some domains don't have a clk, so make sure that we
+ * don't deref an error pointer later.
+ */
+ dom->clk = NULL;
+ }
+
+ dom->base.name = name;
+ dom->base.power_on = bcm2835_power_pd_power_on;
+ dom->base.power_off = bcm2835_power_pd_power_off;
+
+ dom->domain = pd_xlate_index;
+ dom->power = power;
+
+ /* XXX: on/off at boot? */
+ pm_genpd_init(&dom->base, NULL, true);
+
+ power->pd_xlate.domains[pd_xlate_index] = &dom->base;
+
+ return 0;
+}
+
+/** bcm2835_reset_reset - Resets a block that has a reset line in the
+ * PM block.
+ *
+ * The consumer of the reset controller must have the power domain up
+ * -- there's no reset ability with the power domain down. To reset
+ * the sub-block, we just disable its access to memory through the
+ * ASB, reset, and re-enable.
+ */
+static int bcm2835_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
+ reset);
+ struct bcm2835_power_domain *pd;
+ int ret;
+
+ switch (id) {
+ case BCM2835_RESET_V3D:
+ pd = &power->domains[BCM2835_POWER_DOMAIN_GRAFX_V3D];
+ break;
+ case BCM2835_RESET_H264:
+ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_H264];
+ break;
+ case BCM2835_RESET_ISP:
+ pd = &power->domains[BCM2835_POWER_DOMAIN_IMAGE_ISP];
+ break;
+ default:
+ dev_err(power->dev, "Bad reset id %ld\n", id);
+ return -EINVAL;
+ }
+
+ ret = bcm2835_power_pd_power_off(&pd->base);
+ if (ret)
+ return ret;
+
+ return bcm2835_power_pd_power_on(&pd->base);
+}
+
+static int bcm2835_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct bcm2835_power *power = container_of(rcdev, struct bcm2835_power,
+ reset);
+
+ switch (id) {
+ case BCM2835_RESET_V3D:
+ return !PM_READ(PM_GRAFX & PM_V3DRSTN);
+ case BCM2835_RESET_H264:
+ return !PM_READ(PM_IMAGE & PM_H264RSTN);
+ case BCM2835_RESET_ISP:
+ return !PM_READ(PM_IMAGE & PM_ISPRSTN);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct reset_control_ops bcm2835_reset_ops = {
+ .reset = bcm2835_reset_reset,
+ .status = bcm2835_reset_status,
+};
+
+static const char *const power_domain_names[] = {
+ [BCM2835_POWER_DOMAIN_GRAFX] = "grafx",
+ [BCM2835_POWER_DOMAIN_GRAFX_V3D] = "v3d",
+
+ [BCM2835_POWER_DOMAIN_IMAGE] = "image",
+ [BCM2835_POWER_DOMAIN_IMAGE_PERI] = "peri_image",
+ [BCM2835_POWER_DOMAIN_IMAGE_H264] = "h264",
+ [BCM2835_POWER_DOMAIN_IMAGE_ISP] = "isp",
+
+ [BCM2835_POWER_DOMAIN_USB] = "usb",
+ [BCM2835_POWER_DOMAIN_DSI0] = "dsi0",
+ [BCM2835_POWER_DOMAIN_DSI1] = "dsi1",
+ [BCM2835_POWER_DOMAIN_CAM0] = "cam0",
+ [BCM2835_POWER_DOMAIN_CAM1] = "cam1",
+ [BCM2835_POWER_DOMAIN_CCP2TX] = "ccp2tx",
+ [BCM2835_POWER_DOMAIN_HDMI] = "hdmi",
+};
+
+static int bcm2835_power_probe(struct platform_device *pdev)
+{
+ struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct bcm2835_power *power;
+ static const struct {
+ int parent, child;
+ } domain_deps[] = {
+ { BCM2835_POWER_DOMAIN_GRAFX, BCM2835_POWER_DOMAIN_GRAFX_V3D },
+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_PERI },
+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_H264 },
+ { BCM2835_POWER_DOMAIN_IMAGE, BCM2835_POWER_DOMAIN_IMAGE_ISP },
+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_USB },
+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM0 },
+ { BCM2835_POWER_DOMAIN_IMAGE_PERI, BCM2835_POWER_DOMAIN_CAM1 },
+ };
+ int ret = 0, i;
+ u32 id;
+
+ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
+ if (!power)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, power);
+
+ power->dev = dev;
+ power->base = pm->base;
+ power->asb = pm->asb;
+ power->rpivid_asb = pm->rpivid_asb;
+
+ id = readl(power->asb + ASB_AXI_BRDG_ID);
+ if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+ dev_err(dev, "ASB register ID returned 0x%08x\n", id);
+ return -ENODEV;
+ }
+
+ if (power->rpivid_asb) {
+ id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
+ if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+ dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
+ id);
+ return -ENODEV;
+ }
+ }
+
+ power->pd_xlate.domains = devm_kcalloc(dev,
+ ARRAY_SIZE(power_domain_names),
+ sizeof(*power->pd_xlate.domains),
+ GFP_KERNEL);
+ if (!power->pd_xlate.domains)
+ return -ENOMEM;
+
+ power->pd_xlate.num_domains = ARRAY_SIZE(power_domain_names);
+
+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
+ ret = bcm2835_init_power_domain(power, i, power_domain_names[i]);
+ if (ret)
+ goto fail;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(domain_deps); i++) {
+ pm_genpd_add_subdomain(&power->domains[domain_deps[i].parent].base,
+ &power->domains[domain_deps[i].child].base);
+ }
+
+ power->reset.owner = THIS_MODULE;
+ power->reset.nr_resets = BCM2835_RESET_COUNT;
+ power->reset.ops = &bcm2835_reset_ops;
+ power->reset.of_node = dev->parent->of_node;
+
+ ret = devm_reset_controller_register(dev, &power->reset);
+ if (ret)
+ goto fail;
+
+ of_genpd_add_provider_onecell(dev->parent->of_node, &power->pd_xlate);
+
+ dev_info(dev, "Broadcom BCM2835 power domains driver");
+ return 0;
+
+fail:
+ for (i = 0; i < ARRAY_SIZE(power_domain_names); i++) {
+ struct generic_pm_domain *dom = &power->domains[i].base;
+
+ if (dom->name)
+ pm_genpd_remove(dom);
+ }
+ return ret;
+}
+
+static int bcm2835_power_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver bcm2835_power_driver = {
+ .probe = bcm2835_power_probe,
+ .remove = bcm2835_power_remove,
+ .driver = {
+ .name = "bcm2835-power",
+ },
+};
+module_platform_driver(bcm2835_power_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 PM power domains and reset");
+MODULE_LICENSE("GPL");
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
new file mode 100644
index 000000000..355c34482
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-only
+if SOC_BCM63XX
+
+config BCM63XX_POWER
+ bool "BCM63xx power domain driver"
+ depends on BMIPS_GENERIC || (COMPILE_TEST && OF)
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the BCM63xx power domains controller on
+ BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
+
+endif # SOC_BCM63XX
+
+config BCM_PMB
+ bool "Broadcom PMB (Power Management Bus) driver"
+ depends on ARCH_BCMBCA || (COMPILE_TEST && OF)
+ default ARCH_BCMBCA
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the Broadcom's PMB (Power Management Bus) that
+ is used for disabling and enabling SoC devices.
diff --git a/drivers/soc/bcm/bcm63xx/Makefile b/drivers/soc/bcm/bcm63xx/Makefile
new file mode 100644
index 000000000..557eed3d6
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_BCM63XX_POWER) += bcm63xx-power.o
+obj-$(CONFIG_BCM_PMB) += bcm-pmb.o
diff --git a/drivers/soc/bcm/bcm63xx/bcm-pmb.c b/drivers/soc/bcm/bcm63xx/bcm-pmb.c
new file mode 100644
index 000000000..9407cac47
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/bcm-pmb.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2013 Broadcom
+ * Copyright (C) 2020 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <dt-bindings/soc/bcm-pmb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset/bcm63xx_pmb.h>
+
+#define BPCM_ID_REG 0x00
+#define BPCM_CAPABILITIES 0x04
+#define BPCM_CAP_NUM_ZONES 0x000000ff
+#define BPCM_CAP_SR_REG_BITS 0x0000ff00
+#define BPCM_CAP_PLLTYPE 0x00030000
+#define BPCM_CAP_UBUS 0x00080000
+#define BPCM_CONTROL 0x08
+#define BPCM_STATUS 0x0c
+#define BPCM_ROSC_CONTROL 0x10
+#define BPCM_ROSC_THRESH_H 0x14
+#define BPCM_ROSC_THRESHOLD_BCM6838 0x14
+#define BPCM_ROSC_THRESH_S 0x18
+#define BPCM_ROSC_COUNT_BCM6838 0x18
+#define BPCM_ROSC_COUNT 0x1c
+#define BPCM_PWD_CONTROL_BCM6838 0x1c
+#define BPCM_PWD_CONTROL 0x20
+#define BPCM_SR_CONTROL_BCM6838 0x20
+#define BPCM_PWD_ACCUM_CONTROL 0x24
+#define BPCM_SR_CONTROL 0x28
+#define BPCM_GLOBAL_CONTROL 0x2c
+#define BPCM_MISC_CONTROL 0x30
+#define BPCM_MISC_CONTROL2 0x34
+#define BPCM_SGPHY_CNTL 0x38
+#define BPCM_SGPHY_STATUS 0x3c
+#define BPCM_ZONE0 0x40
+#define BPCM_ZONE_CONTROL 0x00
+#define BPCM_ZONE_CONTROL_MANUAL_CLK_EN 0x00000001
+#define BPCM_ZONE_CONTROL_MANUAL_RESET_CTL 0x00000002
+#define BPCM_ZONE_CONTROL_FREQ_SCALE_USED 0x00000004 /* R/O */
+#define BPCM_ZONE_CONTROL_DPG_CAPABLE 0x00000008 /* R/O */
+#define BPCM_ZONE_CONTROL_MANUAL_MEM_PWR 0x00000030
+#define BPCM_ZONE_CONTROL_MANUAL_ISO_CTL 0x00000040
+#define BPCM_ZONE_CONTROL_MANUAL_CTL 0x00000080
+#define BPCM_ZONE_CONTROL_DPG_CTL_EN 0x00000100
+#define BPCM_ZONE_CONTROL_PWR_DN_REQ 0x00000200
+#define BPCM_ZONE_CONTROL_PWR_UP_REQ 0x00000400
+#define BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN 0x00000800
+#define BPCM_ZONE_CONTROL_BLK_RESET_ASSERT 0x00001000
+#define BPCM_ZONE_CONTROL_MEM_STBY 0x00002000
+#define BPCM_ZONE_CONTROL_RESERVED 0x0007c000
+#define BPCM_ZONE_CONTROL_PWR_CNTL_STATE 0x00f80000
+#define BPCM_ZONE_CONTROL_FREQ_SCALAR_DYN_SEL 0x01000000 /* R/O */
+#define BPCM_ZONE_CONTROL_PWR_OFF_STATE 0x02000000 /* R/O */
+#define BPCM_ZONE_CONTROL_PWR_ON_STATE 0x04000000 /* R/O */
+#define BPCM_ZONE_CONTROL_PWR_GOOD 0x08000000 /* R/O */
+#define BPCM_ZONE_CONTROL_DPG_PWR_STATE 0x10000000 /* R/O */
+#define BPCM_ZONE_CONTROL_MEM_PWR_STATE 0x20000000 /* R/O */
+#define BPCM_ZONE_CONTROL_ISO_STATE 0x40000000 /* R/O */
+#define BPCM_ZONE_CONTROL_RESET_STATE 0x80000000 /* R/O */
+#define BPCM_ZONE_CONFIG1 0x04
+#define BPCM_ZONE_CONFIG2 0x08
+#define BPCM_ZONE_FREQ_SCALAR_CONTROL 0x0c
+#define BPCM_ZONE_SIZE 0x10
+
+struct bcm_pmb {
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ bool little_endian;
+ struct genpd_onecell_data genpd_onecell_data;
+};
+
+struct bcm_pmb_pd_data {
+ const char * const name;
+ int id;
+ u8 bus;
+ u8 device;
+};
+
+struct bcm_pmb_pm_domain {
+ struct bcm_pmb *pmb;
+ const struct bcm_pmb_pd_data *data;
+ struct generic_pm_domain genpd;
+};
+
+static int bcm_pmb_bpcm_read(struct bcm_pmb *pmb, int bus, u8 device,
+ int offset, u32 *val)
+{
+ void __iomem *base = pmb->base + bus * 0x20;
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&pmb->lock, flags);
+ err = bpcm_rd(base, device, offset, val);
+ spin_unlock_irqrestore(&pmb->lock, flags);
+
+ if (!err)
+ *val = pmb->little_endian ? le32_to_cpu(*val) : be32_to_cpu(*val);
+
+ return err;
+}
+
+static int bcm_pmb_bpcm_write(struct bcm_pmb *pmb, int bus, u8 device,
+ int offset, u32 val)
+{
+ void __iomem *base = pmb->base + bus * 0x20;
+ unsigned long flags;
+ int err;
+
+ val = pmb->little_endian ? cpu_to_le32(val) : cpu_to_be32(val);
+
+ spin_lock_irqsave(&pmb->lock, flags);
+ err = bpcm_wr(base, device, offset, val);
+ spin_unlock_irqrestore(&pmb->lock, flags);
+
+ return err;
+}
+
+static int bcm_pmb_power_off_zone(struct bcm_pmb *pmb, int bus, u8 device,
+ int zone)
+{
+ int offset;
+ u32 val;
+ int err;
+
+ offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
+ if (err)
+ return err;
+
+ val |= BPCM_ZONE_CONTROL_PWR_DN_REQ;
+ val &= ~BPCM_ZONE_CONTROL_PWR_UP_REQ;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
+
+ return err;
+}
+
+static int bcm_pmb_power_on_zone(struct bcm_pmb *pmb, int bus, u8 device,
+ int zone)
+{
+ int offset;
+ u32 val;
+ int err;
+
+ offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
+ if (err)
+ return err;
+
+ if (!(val & BPCM_ZONE_CONTROL_PWR_ON_STATE)) {
+ val &= ~BPCM_ZONE_CONTROL_PWR_DN_REQ;
+ val |= BPCM_ZONE_CONTROL_DPG_CTL_EN;
+ val |= BPCM_ZONE_CONTROL_PWR_UP_REQ;
+ val |= BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN;
+ val |= BPCM_ZONE_CONTROL_BLK_RESET_ASSERT;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
+ }
+
+ return err;
+}
+
+static int bcm_pmb_power_off_device(struct bcm_pmb *pmb, int bus, u8 device)
+{
+ int offset;
+ u32 val;
+ int err;
+
+ /* Entire device can be powered off by powering off the 0th zone */
+ offset = BPCM_ZONE0 + BPCM_ZONE_CONTROL;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
+ if (err)
+ return err;
+
+ if (!(val & BPCM_ZONE_CONTROL_PWR_OFF_STATE)) {
+ val = BPCM_ZONE_CONTROL_PWR_DN_REQ;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
+ }
+
+ return err;
+}
+
+static int bcm_pmb_power_on_device(struct bcm_pmb *pmb, int bus, u8 device)
+{
+ u32 val;
+ int err;
+ int i;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, BPCM_CAPABILITIES, &val);
+ if (err)
+ return err;
+
+ for (i = 0; i < (val & BPCM_CAP_NUM_ZONES); i++) {
+ err = bcm_pmb_power_on_zone(pmb, bus, device, i);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+static int bcm_pmb_power_on_sata(struct bcm_pmb *pmb, int bus, u8 device)
+{
+ int err;
+
+ err = bcm_pmb_power_on_zone(pmb, bus, device, 0);
+ if (err)
+ return err;
+
+ /* Does not apply to the BCM963158 */
+ err = bcm_pmb_bpcm_write(pmb, bus, device, BPCM_MISC_CONTROL, 0);
+ if (err)
+ return err;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, BPCM_SR_CONTROL, 0xffffffff);
+ if (err)
+ return err;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, BPCM_SR_CONTROL, 0);
+
+ return err;
+}
+
+static int bcm_pmb_power_on(struct generic_pm_domain *genpd)
+{
+ struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
+ const struct bcm_pmb_pd_data *data = pd->data;
+ struct bcm_pmb *pmb = pd->pmb;
+
+ switch (data->id) {
+ case BCM_PMB_PCIE0:
+ case BCM_PMB_PCIE1:
+ case BCM_PMB_PCIE2:
+ return bcm_pmb_power_on_zone(pmb, data->bus, data->device, 0);
+ case BCM_PMB_HOST_USB:
+ return bcm_pmb_power_on_device(pmb, data->bus, data->device);
+ case BCM_PMB_SATA:
+ return bcm_pmb_power_on_sata(pmb, data->bus, data->device);
+ default:
+ dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
+ return -EINVAL;
+ }
+}
+
+static int bcm_pmb_power_off(struct generic_pm_domain *genpd)
+{
+ struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
+ const struct bcm_pmb_pd_data *data = pd->data;
+ struct bcm_pmb *pmb = pd->pmb;
+
+ switch (data->id) {
+ case BCM_PMB_PCIE0:
+ case BCM_PMB_PCIE1:
+ case BCM_PMB_PCIE2:
+ return bcm_pmb_power_off_zone(pmb, data->bus, data->device, 0);
+ case BCM_PMB_HOST_USB:
+ return bcm_pmb_power_off_device(pmb, data->bus, data->device);
+ default:
+ dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
+ return -EINVAL;
+ }
+}
+
+static int bcm_pmb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct bcm_pmb_pd_data *table;
+ const struct bcm_pmb_pd_data *e;
+ struct bcm_pmb *pmb;
+ int max_id;
+ int err;
+
+ pmb = devm_kzalloc(dev, sizeof(*pmb), GFP_KERNEL);
+ if (!pmb)
+ return -ENOMEM;
+
+ pmb->dev = dev;
+
+ pmb->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(pmb->base))
+ return PTR_ERR(pmb->base);
+
+ spin_lock_init(&pmb->lock);
+
+ pmb->little_endian = !of_device_is_big_endian(dev->of_node);
+
+ table = of_device_get_match_data(dev);
+ if (!table)
+ return -EINVAL;
+
+ max_id = 0;
+ for (e = table; e->name; e++)
+ max_id = max(max_id, e->id);
+
+ pmb->genpd_onecell_data.num_domains = max_id + 1;
+ pmb->genpd_onecell_data.domains =
+ devm_kcalloc(dev, pmb->genpd_onecell_data.num_domains,
+ sizeof(struct generic_pm_domain *), GFP_KERNEL);
+ if (!pmb->genpd_onecell_data.domains)
+ return -ENOMEM;
+
+ for (e = table; e->name; e++) {
+ struct bcm_pmb_pm_domain *pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+
+ if (!pd)
+ return -ENOMEM;
+
+ pd->pmb = pmb;
+ pd->data = e;
+ pd->genpd.name = e->name;
+ pd->genpd.power_on = bcm_pmb_power_on;
+ pd->genpd.power_off = bcm_pmb_power_off;
+
+ pm_genpd_init(&pd->genpd, NULL, true);
+ pmb->genpd_onecell_data.domains[e->id] = &pd->genpd;
+ }
+
+ err = of_genpd_add_provider_onecell(dev->of_node, &pmb->genpd_onecell_data);
+ if (err) {
+ dev_err(dev, "failed to add genpd provider: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct bcm_pmb_pd_data bcm_pmb_bcm4908_data[] = {
+ { .name = "pcie2", .id = BCM_PMB_PCIE2, .bus = 0, .device = 2, },
+ { .name = "pcie0", .id = BCM_PMB_PCIE0, .bus = 1, .device = 14, },
+ { .name = "pcie1", .id = BCM_PMB_PCIE1, .bus = 1, .device = 15, },
+ { .name = "usb", .id = BCM_PMB_HOST_USB, .bus = 1, .device = 17, },
+ { },
+};
+
+static const struct bcm_pmb_pd_data bcm_pmb_bcm63138_data[] = {
+ { .name = "sata", .id = BCM_PMB_SATA, .bus = 0, .device = 3, },
+ { },
+};
+
+static const struct of_device_id bcm_pmb_of_match[] = {
+ { .compatible = "brcm,bcm4908-pmb", .data = &bcm_pmb_bcm4908_data, },
+ { .compatible = "brcm,bcm63138-pmb", .data = &bcm_pmb_bcm63138_data, },
+ { },
+};
+
+static struct platform_driver bcm_pmb_driver = {
+ .driver = {
+ .name = "bcm-pmb",
+ .of_match_table = bcm_pmb_of_match,
+ },
+ .probe = bcm_pmb_probe,
+};
+
+builtin_platform_driver(bcm_pmb_driver);
diff --git a/drivers/soc/bcm/bcm63xx/bcm63xx-power.c b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c
new file mode 100644
index 000000000..aa72e13d5
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/bcm63xx-power.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM63xx Power Domain Controller Driver
+ *
+ * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
+ */
+
+#include <dt-bindings/soc/bcm6318-pm.h>
+#include <dt-bindings/soc/bcm6328-pm.h>
+#include <dt-bindings/soc/bcm6362-pm.h>
+#include <dt-bindings/soc/bcm63268-pm.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct bcm63xx_power_dev {
+ struct generic_pm_domain genpd;
+ struct bcm63xx_power *power;
+ uint32_t mask;
+};
+
+struct bcm63xx_power {
+ void __iomem *base;
+ spinlock_t lock;
+ struct bcm63xx_power_dev *dev;
+ struct genpd_onecell_data genpd_data;
+ struct generic_pm_domain **genpd;
+};
+
+struct bcm63xx_power_data {
+ const char * const name;
+ uint8_t bit;
+ unsigned int flags;
+};
+
+static int bcm63xx_power_get_state(struct bcm63xx_power_dev *pmd, bool *is_on)
+{
+ struct bcm63xx_power *power = pmd->power;
+
+ if (!pmd->mask) {
+ *is_on = false;
+ return -EINVAL;
+ }
+
+ *is_on = !(__raw_readl(power->base) & pmd->mask);
+
+ return 0;
+}
+
+static int bcm63xx_power_set_state(struct bcm63xx_power_dev *pmd, bool on)
+{
+ struct bcm63xx_power *power = pmd->power;
+ unsigned long flags;
+ uint32_t val;
+
+ if (!pmd->mask)
+ return -EINVAL;
+
+ spin_lock_irqsave(&power->lock, flags);
+ val = __raw_readl(power->base);
+ if (on)
+ val &= ~pmd->mask;
+ else
+ val |= pmd->mask;
+ __raw_writel(val, power->base);
+ spin_unlock_irqrestore(&power->lock, flags);
+
+ return 0;
+}
+
+static int bcm63xx_power_on(struct generic_pm_domain *genpd)
+{
+ struct bcm63xx_power_dev *pmd = container_of(genpd,
+ struct bcm63xx_power_dev, genpd);
+
+ return bcm63xx_power_set_state(pmd, true);
+}
+
+static int bcm63xx_power_off(struct generic_pm_domain *genpd)
+{
+ struct bcm63xx_power_dev *pmd = container_of(genpd,
+ struct bcm63xx_power_dev, genpd);
+
+ return bcm63xx_power_set_state(pmd, false);
+}
+
+static int bcm63xx_power_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct bcm63xx_power_data *entry, *table;
+ struct bcm63xx_power *power;
+ unsigned int ndom;
+ uint8_t max_bit = 0;
+ int ret;
+
+ power = devm_kzalloc(dev, sizeof(*power), GFP_KERNEL);
+ if (!power)
+ return -ENOMEM;
+
+ power->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(power->base))
+ return PTR_ERR(power->base);
+
+ table = of_device_get_match_data(dev);
+ if (!table)
+ return -EINVAL;
+
+ power->genpd_data.num_domains = 0;
+ ndom = 0;
+ for (entry = table; entry->name; entry++) {
+ max_bit = max(max_bit, entry->bit);
+ ndom++;
+ }
+
+ if (!ndom)
+ return -ENODEV;
+
+ power->genpd_data.num_domains = max_bit + 1;
+
+ power->dev = devm_kcalloc(dev, power->genpd_data.num_domains,
+ sizeof(struct bcm63xx_power_dev),
+ GFP_KERNEL);
+ if (!power->dev)
+ return -ENOMEM;
+
+ power->genpd = devm_kcalloc(dev, power->genpd_data.num_domains,
+ sizeof(struct generic_pm_domain *),
+ GFP_KERNEL);
+ if (!power->genpd)
+ return -ENOMEM;
+
+ power->genpd_data.domains = power->genpd;
+
+ ndom = 0;
+ for (entry = table; entry->name; entry++) {
+ struct bcm63xx_power_dev *pmd = &power->dev[ndom];
+ bool is_on;
+
+ pmd->power = power;
+ pmd->mask = BIT(entry->bit);
+ pmd->genpd.name = entry->name;
+ pmd->genpd.flags = entry->flags;
+
+ ret = bcm63xx_power_get_state(pmd, &is_on);
+ if (ret)
+ dev_warn(dev, "unable to get current state for %s\n",
+ pmd->genpd.name);
+
+ pmd->genpd.power_on = bcm63xx_power_on;
+ pmd->genpd.power_off = bcm63xx_power_off;
+
+ pm_genpd_init(&pmd->genpd, NULL, !is_on);
+ power->genpd[entry->bit] = &pmd->genpd;
+
+ ndom++;
+ }
+
+ spin_lock_init(&power->lock);
+
+ ret = of_genpd_add_provider_onecell(np, &power->genpd_data);
+ if (ret) {
+ dev_err(dev, "failed to register genpd driver: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(dev, "registered %u power domains\n", ndom);
+
+ return 0;
+}
+
+static const struct bcm63xx_power_data bcm6318_power_domains[] = {
+ {
+ .name = "pcie",
+ .bit = BCM6318_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "usb",
+ .bit = BCM6318_POWER_DOMAIN_USB,
+ }, {
+ .name = "ephy0",
+ .bit = BCM6318_POWER_DOMAIN_EPHY0,
+ }, {
+ .name = "ephy1",
+ .bit = BCM6318_POWER_DOMAIN_EPHY1,
+ }, {
+ .name = "ephy2",
+ .bit = BCM6318_POWER_DOMAIN_EPHY2,
+ }, {
+ .name = "ephy3",
+ .bit = BCM6318_POWER_DOMAIN_EPHY3,
+ }, {
+ .name = "ldo2p5",
+ .bit = BCM6318_POWER_DOMAIN_LDO2P5,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "ldo2p9",
+ .bit = BCM6318_POWER_DOMAIN_LDO2P9,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "sw1p0",
+ .bit = BCM6318_POWER_DOMAIN_SW1P0,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "pad",
+ .bit = BCM6318_POWER_DOMAIN_PAD,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct bcm63xx_power_data bcm6328_power_domains[] = {
+ {
+ .name = "adsl2-mips",
+ .bit = BCM6328_POWER_DOMAIN_ADSL2_MIPS,
+ }, {
+ .name = "adsl2-phy",
+ .bit = BCM6328_POWER_DOMAIN_ADSL2_PHY,
+ }, {
+ .name = "adsl2-afe",
+ .bit = BCM6328_POWER_DOMAIN_ADSL2_AFE,
+ }, {
+ .name = "sar",
+ .bit = BCM6328_POWER_DOMAIN_SAR,
+ }, {
+ .name = "pcm",
+ .bit = BCM6328_POWER_DOMAIN_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM6328_POWER_DOMAIN_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM6328_POWER_DOMAIN_USBH,
+ }, {
+ .name = "pcie",
+ .bit = BCM6328_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "robosw",
+ .bit = BCM6328_POWER_DOMAIN_ROBOSW,
+ }, {
+ .name = "ephy",
+ .bit = BCM6328_POWER_DOMAIN_EPHY,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct bcm63xx_power_data bcm6362_power_domains[] = {
+ {
+ .name = "sar",
+ .bit = BCM6362_POWER_DOMAIN_SAR,
+ }, {
+ .name = "ipsec",
+ .bit = BCM6362_POWER_DOMAIN_IPSEC,
+ }, {
+ .name = "mips",
+ .bit = BCM6362_POWER_DOMAIN_MIPS,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "dect",
+ .bit = BCM6362_POWER_DOMAIN_DECT,
+ }, {
+ .name = "usbh",
+ .bit = BCM6362_POWER_DOMAIN_USBH,
+ }, {
+ .name = "usbd",
+ .bit = BCM6362_POWER_DOMAIN_USBD,
+ }, {
+ .name = "robosw",
+ .bit = BCM6362_POWER_DOMAIN_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM6362_POWER_DOMAIN_PCM,
+ }, {
+ .name = "periph",
+ .bit = BCM6362_POWER_DOMAIN_PERIPH,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "adsl-phy",
+ .bit = BCM6362_POWER_DOMAIN_ADSL_PHY,
+ }, {
+ .name = "gmii-pads",
+ .bit = BCM6362_POWER_DOMAIN_GMII_PADS,
+ }, {
+ .name = "fap",
+ .bit = BCM6362_POWER_DOMAIN_FAP,
+ }, {
+ .name = "pcie",
+ .bit = BCM6362_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "wlan-pads",
+ .bit = BCM6362_POWER_DOMAIN_WLAN_PADS,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct bcm63xx_power_data bcm63268_power_domains[] = {
+ {
+ .name = "sar",
+ .bit = BCM63268_POWER_DOMAIN_SAR,
+ }, {
+ .name = "ipsec",
+ .bit = BCM63268_POWER_DOMAIN_IPSEC,
+ }, {
+ .name = "mips",
+ .bit = BCM63268_POWER_DOMAIN_MIPS,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "dect",
+ .bit = BCM63268_POWER_DOMAIN_DECT,
+ }, {
+ .name = "usbh",
+ .bit = BCM63268_POWER_DOMAIN_USBH,
+ }, {
+ .name = "usbd",
+ .bit = BCM63268_POWER_DOMAIN_USBD,
+ }, {
+ .name = "robosw",
+ .bit = BCM63268_POWER_DOMAIN_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM63268_POWER_DOMAIN_PCM,
+ }, {
+ .name = "periph",
+ .bit = BCM63268_POWER_DOMAIN_PERIPH,
+ .flags = GENPD_FLAG_ALWAYS_ON,
+ }, {
+ .name = "vdsl-phy",
+ .bit = BCM63268_POWER_DOMAIN_VDSL_PHY,
+ }, {
+ .name = "vdsl-mips",
+ .bit = BCM63268_POWER_DOMAIN_VDSL_MIPS,
+ }, {
+ .name = "fap",
+ .bit = BCM63268_POWER_DOMAIN_FAP,
+ }, {
+ .name = "pcie",
+ .bit = BCM63268_POWER_DOMAIN_PCIE,
+ }, {
+ .name = "wlan-pads",
+ .bit = BCM63268_POWER_DOMAIN_WLAN_PADS,
+ }, {
+ /* sentinel */
+ },
+};
+
+static const struct of_device_id bcm63xx_power_of_match[] = {
+ {
+ .compatible = "brcm,bcm6318-power-controller",
+ .data = &bcm6318_power_domains,
+ }, {
+ .compatible = "brcm,bcm6328-power-controller",
+ .data = &bcm6328_power_domains,
+ }, {
+ .compatible = "brcm,bcm6362-power-controller",
+ .data = &bcm6362_power_domains,
+ }, {
+ .compatible = "brcm,bcm63268-power-controller",
+ .data = &bcm63268_power_domains,
+ }, {
+ /* sentinel */
+ }
+};
+
+static struct platform_driver bcm63xx_power_driver = {
+ .driver = {
+ .name = "bcm63xx-power-controller",
+ .of_match_table = bcm63xx_power_of_match,
+ },
+ .probe = bcm63xx_power_probe,
+};
+builtin_platform_driver(bcm63xx_power_driver);
diff --git a/drivers/soc/bcm/brcmstb/Kconfig b/drivers/soc/bcm/brcmstb/Kconfig
new file mode 100644
index 000000000..38e476905
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/Kconfig
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-only
+if SOC_BRCMSTB
+
+config BRCMSTB_PM
+ bool "Support suspend/resume for STB platforms"
+ default y
+ depends on PM
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ select ARM_CPU_SUSPEND if ARM
+
+endif # SOC_BRCMSTB
diff --git a/drivers/soc/bcm/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile
new file mode 100644
index 000000000..fe5c43d26
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y += common.o biuctrl.o
+obj-$(CONFIG_BRCMSTB_PM) += pm/
diff --git a/drivers/soc/bcm/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c
new file mode 100644
index 000000000..364ddbe36
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/biuctrl.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Broadcom STB SoCs Bus Unit Interface controls
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ */
+
+#define pr_fmt(fmt) "brcmstb: " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+
+#define RACENPREF_MASK 0x3
+#define RACPREFINST_SHIFT 0
+#define RACENINST_SHIFT 2
+#define RACPREFDATA_SHIFT 4
+#define RACENDATA_SHIFT 6
+#define RAC_CPU_SHIFT 8
+#define RACCFG_MASK 0xff
+#define DPREF_LINE_2_SHIFT 24
+#define DPREF_LINE_2_MASK 0xff
+
+/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
+#define RAC_DATA_INST_EN_MASK (1 << RACPREFINST_SHIFT | \
+ RACENPREF_MASK << RACENINST_SHIFT | \
+ 1 << RACPREFDATA_SHIFT | \
+ RACENPREF_MASK << RACENDATA_SHIFT)
+
+#define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000
+#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK 0xf
+#define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK 0xf
+#define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x) ((x) * 8)
+#define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x) (((x) * 8) + 4)
+
+#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x) ((x) * 8)
+#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK 0xff
+
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK 0xf
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK 0xf
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT 4
+#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE BIT(8)
+
+static void __iomem *cpubiuctrl_base;
+static bool mcp_wr_pairing_en;
+static const int *cpubiuctrl_regs;
+
+enum cpubiuctrl_regs {
+ CPU_CREDIT_REG = 0,
+ CPU_MCP_FLOW_REG,
+ CPU_WRITEBACK_CTRL_REG,
+ RAC_CONFIG0_REG,
+ RAC_CONFIG1_REG,
+ NUM_CPU_BIUCTRL_REGS,
+};
+
+static inline u32 cbc_readl(int reg)
+{
+ int offset = cpubiuctrl_regs[reg];
+
+ if (offset == -1 ||
+ (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
+ return (u32)-1;
+
+ return readl_relaxed(cpubiuctrl_base + offset);
+}
+
+static inline void cbc_writel(u32 val, int reg)
+{
+ int offset = cpubiuctrl_regs[reg];
+
+ if (offset == -1 ||
+ (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
+ return;
+
+ writel(val, cpubiuctrl_base + offset);
+}
+
+static const int b15_cpubiuctrl_regs[] = {
+ [CPU_CREDIT_REG] = 0x184,
+ [CPU_MCP_FLOW_REG] = -1,
+ [CPU_WRITEBACK_CTRL_REG] = -1,
+ [RAC_CONFIG0_REG] = -1,
+ [RAC_CONFIG1_REG] = -1,
+};
+
+/* Odd cases, e.g: 7260A0 */
+static const int b53_cpubiuctrl_no_wb_regs[] = {
+ [CPU_CREDIT_REG] = 0x0b0,
+ [CPU_MCP_FLOW_REG] = 0x0b4,
+ [CPU_WRITEBACK_CTRL_REG] = -1,
+ [RAC_CONFIG0_REG] = 0x78,
+ [RAC_CONFIG1_REG] = 0x7c,
+};
+
+static const int b53_cpubiuctrl_regs[] = {
+ [CPU_CREDIT_REG] = 0x0b0,
+ [CPU_MCP_FLOW_REG] = 0x0b4,
+ [CPU_WRITEBACK_CTRL_REG] = 0x22c,
+ [RAC_CONFIG0_REG] = 0x78,
+ [RAC_CONFIG1_REG] = 0x7c,
+};
+
+static const int a72_cpubiuctrl_regs[] = {
+ [CPU_CREDIT_REG] = 0x18,
+ [CPU_MCP_FLOW_REG] = 0x1c,
+ [CPU_WRITEBACK_CTRL_REG] = 0x20,
+ [RAC_CONFIG0_REG] = 0x08,
+ [RAC_CONFIG1_REG] = 0x0c,
+};
+
+static int __init mcp_write_pairing_set(void)
+{
+ u32 creds = 0;
+
+ if (!cpubiuctrl_base)
+ return -1;
+
+ creds = cbc_readl(CPU_CREDIT_REG);
+ if (mcp_wr_pairing_en) {
+ pr_info("MCP: Enabling write pairing\n");
+ cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+ CPU_CREDIT_REG);
+ } else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
+ pr_info("MCP: Disabling write pairing\n");
+ cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+ CPU_CREDIT_REG);
+ } else {
+ pr_info("MCP: Write pairing already disabled\n");
+ }
+
+ return 0;
+}
+
+static const u32 a72_b53_mach_compat[] = {
+ 0x7211,
+ 0x72113,
+ 0x72116,
+ 0x7216,
+ 0x72164,
+ 0x72165,
+ 0x7255,
+ 0x7260,
+ 0x7268,
+ 0x7271,
+ 0x7278,
+};
+
+/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of
+ * hardware after the integrated L2 cache of the B53 CPU complex whose purpose
+ * is to prefetch instruction and/or data with a line size of either 64 bytes
+ * or 256 bytes. The rationale is that the data-bus of the CPU interface is
+ * optimized for 256-byte transactions, and enabling the read-ahead cache
+ * provides a significant performance boost (typically twice the performance
+ * for a memcpy benchmark application).
+ *
+ * The read-ahead cache is transparent for Virtual Address cache maintenance
+ * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC. So no special
+ * handling is needed for the DMA API above and beyond what is included in the
+ * arm64 implementation.
+ *
+ * In addition, since the Point of Unification is typically between L1 and L2
+ * for the Brahma-B53 processor no special read-ahead cache handling is needed
+ * for the IC IALLU and IC IALLUIS cache maintenance operations.
+ *
+ * However, it is not possible to specify the cache level (L3) for the cache
+ * maintenance instructions operating by set/way to operate on the read-ahead
+ * cache. The read-ahead cache will maintain coherency when inner cache lines
+ * are cleaned by set/way, but if it is necessary to invalidate inner cache
+ * lines by set/way to maintain coherency with system masters operating on
+ * shared memory that does not have hardware support for coherency, then it
+ * will also be necessary to explicitly invalidate the read-ahead cache.
+ */
+static void __init a72_b53_rac_enable_all(struct device_node *np)
+{
+ unsigned int cpu;
+ u32 enable = 0, pref_dist, shift;
+
+ if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
+ return;
+
+ if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
+ return;
+
+ pref_dist = cbc_readl(RAC_CONFIG1_REG);
+ for_each_possible_cpu(cpu) {
+ shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
+ enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
+ if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
+ enable &= ~(RACENPREF_MASK << shift);
+ enable |= 3 << shift;
+ pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
+ }
+ }
+
+ cbc_writel(enable, RAC_CONFIG0_REG);
+ cbc_writel(pref_dist, RAC_CONFIG1_REG);
+
+ pr_info("%pOF: Broadcom %s read-ahead cache\n",
+ np, cpubiuctrl_regs == a72_cpubiuctrl_regs ?
+ "Cortex-A72" : "Brahma-B53");
+}
+
+static void __init mcp_a72_b53_set(void)
+{
+ unsigned int i;
+ u32 reg;
+
+ reg = brcmstb_get_family_id();
+
+ for (i = 0; i < ARRAY_SIZE(a72_b53_mach_compat); i++) {
+ if (BRCM_ID(reg) == a72_b53_mach_compat[i])
+ break;
+ }
+
+ if (i == ARRAY_SIZE(a72_b53_mach_compat))
+ return;
+
+ /* Set all 3 MCP interfaces to 8 credits */
+ reg = cbc_readl(CPU_CREDIT_REG);
+ for (i = 0; i < 3; i++) {
+ reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK <<
+ CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i));
+ reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK <<
+ CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i));
+ reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i);
+ reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i);
+ }
+ cbc_writel(reg, CPU_CREDIT_REG);
+
+ /* Max out the number of in-flight Jwords reads on the MCP interface */
+ reg = cbc_readl(CPU_MCP_FLOW_REG);
+ for (i = 0; i < 3; i++)
+ reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK <<
+ CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i);
+ cbc_writel(reg, CPU_MCP_FLOW_REG);
+
+ /* Enable writeback throttling, set timeout to 128 cycles, 256 cycles
+ * threshold
+ */
+ reg = cbc_readl(CPU_WRITEBACK_CTRL_REG);
+ reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE;
+ reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK;
+ reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK <<
+ CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT);
+ reg |= 8;
+ reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT;
+ cbc_writel(reg, CPU_WRITEBACK_CTRL_REG);
+}
+
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
+{
+ struct device_node *cpu_dn;
+ u32 family_id;
+ int ret = 0;
+
+ cpubiuctrl_base = of_iomap(np, 0);
+ if (!cpubiuctrl_base) {
+ pr_err("failed to remap BIU control base\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
+
+ cpu_dn = of_get_cpu_node(0, NULL);
+ if (!cpu_dn) {
+ pr_err("failed to obtain CPU device node\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
+ cpubiuctrl_regs = b15_cpubiuctrl_regs;
+ else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53"))
+ cpubiuctrl_regs = b53_cpubiuctrl_regs;
+ else if (of_device_is_compatible(cpu_dn, "arm,cortex-a72"))
+ cpubiuctrl_regs = a72_cpubiuctrl_regs;
+ else {
+ pr_err("unsupported CPU\n");
+ ret = -EINVAL;
+ }
+ of_node_put(cpu_dn);
+
+ family_id = brcmstb_get_family_id();
+ if (BRCM_ID(family_id) == 0x7260 && BRCM_REV(family_id) == 0)
+ cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
+out:
+ if (ret && cpubiuctrl_base) {
+ iounmap(cpubiuctrl_base);
+ cpubiuctrl_base = NULL;
+ }
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS];
+
+static int brcmstb_cpu_credit_reg_suspend(void)
+{
+ unsigned int i;
+
+ if (!cpubiuctrl_base)
+ return 0;
+
+ for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
+ cpubiuctrl_reg_save[i] = cbc_readl(i);
+
+ return 0;
+}
+
+static void brcmstb_cpu_credit_reg_resume(void)
+{
+ unsigned int i;
+
+ if (!cpubiuctrl_base)
+ return;
+
+ for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
+ cbc_writel(cpubiuctrl_reg_save[i], i);
+}
+
+static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
+ .suspend = brcmstb_cpu_credit_reg_suspend,
+ .resume = brcmstb_cpu_credit_reg_resume,
+};
+#endif
+
+
+static int __init brcmstb_biuctrl_init(void)
+{
+ struct device_node *np;
+ int ret;
+
+ /* We might be running on a multi-platform kernel, don't make this a
+ * fatal error, just bail out early
+ */
+ np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+ if (!np)
+ return 0;
+
+ ret = setup_hifcpubiuctrl_regs(np);
+ if (ret)
+ goto out_put;
+
+ ret = mcp_write_pairing_set();
+ if (ret) {
+ pr_err("MCP: Unable to disable write pairing!\n");
+ goto out_put;
+ }
+
+ a72_b53_rac_enable_all(np);
+ mcp_a72_b53_set();
+#ifdef CONFIG_PM_SLEEP
+ register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
+#endif
+ ret = 0;
+out_put:
+ of_node_put(np);
+ return ret;
+}
+early_initcall(brcmstb_biuctrl_init);
diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
new file mode 100644
index 000000000..2a010881f
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+#include <linux/sys_soc.h>
+
+static u32 family_id;
+static u32 product_id;
+
+u32 brcmstb_get_family_id(void)
+{
+ return family_id;
+}
+EXPORT_SYMBOL(brcmstb_get_family_id);
+
+u32 brcmstb_get_product_id(void)
+{
+ return product_id;
+}
+EXPORT_SYMBOL(brcmstb_get_product_id);
+
+static const struct of_device_id sun_top_ctrl_match[] = {
+ { .compatible = "brcm,bcm7125-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7346-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7358-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7360-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7362-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7420-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7425-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7429-sun-top-ctrl", },
+ { .compatible = "brcm,bcm7435-sun-top-ctrl", },
+ { .compatible = "brcm,brcmstb-sun-top-ctrl", },
+ { }
+};
+
+static int __init brcmstb_soc_device_early_init(void)
+{
+ struct device_node *sun_top_ctrl;
+ void __iomem *sun_top_ctrl_base;
+ int ret = 0;
+
+ /* We could be on a multi-platform kernel, don't make this fatal but
+ * bail out early
+ */
+ sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match);
+ if (!sun_top_ctrl)
+ return ret;
+
+ sun_top_ctrl_base = of_iomap(sun_top_ctrl, 0);
+ if (!sun_top_ctrl_base) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ family_id = readl(sun_top_ctrl_base);
+ product_id = readl(sun_top_ctrl_base + 0x4);
+ iounmap(sun_top_ctrl_base);
+out:
+ of_node_put(sun_top_ctrl);
+ return ret;
+}
+early_initcall(brcmstb_soc_device_early_init);
+
+static int __init brcmstb_soc_device_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct device_node *sun_top_ctrl;
+ struct soc_device *soc_dev;
+ int ret = 0;
+
+ /* We could be on a multi-platform kernel, don't make this fatal but
+ * bail out early
+ */
+ sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match);
+ if (!sun_top_ctrl)
+ return ret;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ soc_dev_attr->family = kasprintf(GFP_KERNEL, "%x",
+ family_id >> 28 ?
+ family_id >> 16 : family_id >> 8);
+ soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%x",
+ product_id >> 28 ?
+ product_id >> 16 : product_id >> 8);
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c%d",
+ ((product_id & 0xf0) >> 4) + 'A',
+ product_id & 0xf);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->family);
+ kfree(soc_dev_attr->soc_id);
+ kfree(soc_dev_attr->revision);
+ kfree(soc_dev_attr);
+ ret = -ENOMEM;
+ }
+out:
+ of_node_put(sun_top_ctrl);
+ return ret;
+}
+arch_initcall(brcmstb_soc_device_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/Makefile b/drivers/soc/bcm/brcmstb/pm/Makefile
new file mode 100644
index 000000000..8e10abb14
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_ARM) += s2-arm.o pm-arm.o
+AFLAGS_s2-arm.o := -march=armv7-a
+obj-$(CONFIG_BMIPS_GENERIC) += s2-mips.o s3-mips.o pm-mips.o
diff --git a/drivers/soc/bcm/brcmstb/pm/aon_defs.h b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
new file mode 100644
index 000000000..f695262ac
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Always ON (AON) register interface between bootloader and Linux
+ *
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#ifndef __BRCMSTB_AON_DEFS_H__
+#define __BRCMSTB_AON_DEFS_H__
+
+#include <linux/compiler.h>
+
+/* Magic number in upper 16-bits */
+#define BRCMSTB_S3_MAGIC_MASK 0xffff0000
+#define BRCMSTB_S3_MAGIC_SHORT 0x5AFE0000
+
+enum {
+ /* Restore random key for AES memory verification (off = fixed key) */
+ S3_FLAG_LOAD_RANDKEY = (1 << 0),
+
+ /* Scratch buffer page table is present */
+ S3_FLAG_SCRATCH_BUFFER_TABLE = (1 << 1),
+
+ /* Skip all memory verification */
+ S3_FLAG_NO_MEM_VERIFY = (1 << 2),
+
+ /*
+ * Modification of this bit reserved for bootloader only.
+ * 1=PSCI started Linux, 0=Direct jump to Linux.
+ */
+ S3_FLAG_PSCI_BOOT = (1 << 3),
+
+ /*
+ * Modification of this bit reserved for bootloader only.
+ * 1=64 bit boot, 0=32 bit boot.
+ */
+ S3_FLAG_BOOTED64 = (1 << 4),
+};
+
+#define BRCMSTB_HASH_LEN (128 / 8) /* 128-bit hash */
+
+#define AON_REG_MAGIC_FLAGS 0x00
+#define AON_REG_CONTROL_LOW 0x04
+#define AON_REG_CONTROL_HIGH 0x08
+#define AON_REG_S3_HASH 0x0c /* hash of S3 params */
+#define AON_REG_CONTROL_HASH_LEN 0x1c
+#define AON_REG_PANIC 0x20
+
+#define BRCMSTB_S3_MAGIC 0x5AFEB007
+#define BRCMSTB_PANIC_MAGIC 0x512E115E
+#define BOOTLOADER_SCRATCH_SIZE 64
+#define BRCMSTB_DTU_STATE_MAP_ENTRIES (8*1024)
+#define BRCMSTB_DTU_CONFIG_ENTRIES (512)
+#define BRCMSTB_DTU_COUNT (2)
+
+#define IMAGE_DESCRIPTORS_BUFSIZE (2 * 1024)
+#define S3_BOOTLOADER_RESERVED (S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
+
+struct brcmstb_bootloader_dtu_table {
+ uint32_t dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
+ uint32_t dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
+};
+
+/*
+ * Bootloader utilizes a custom parameter block left in DRAM for handling S3
+ * warm resume
+ */
+struct brcmstb_s3_params {
+ /* scratch memory for bootloader */
+ uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
+
+ uint32_t magic; /* BRCMSTB_S3_MAGIC */
+ uint64_t reentry; /* PA */
+
+ /* descriptors */
+ uint32_t hash[BRCMSTB_HASH_LEN / 4];
+
+ /*
+ * If 0, then ignore this parameter (there is only one set of
+ * descriptors)
+ *
+ * If non-0, then a second set of descriptors is stored at:
+ *
+ * descriptors + desc_offset_2
+ *
+ * The MAC result of both descriptors is XOR'd and stored in @hash
+ */
+ uint32_t desc_offset_2;
+
+ /*
+ * (Physical) address of a brcmstb_bootloader_scratch_table, for
+ * providing a large DRAM buffer to the bootloader
+ */
+ uint64_t buffer_table;
+
+ uint32_t spare[70];
+
+ uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
+ /*
+ * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
+ */
+ struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
+} __packed;
+
+#endif /* __BRCMSTB_AON_DEFS_H__ */
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-arm.c b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
new file mode 100644
index 000000000..d681cd24c
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@@ -0,0 +1,874 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ARM-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * S2: clock gate CPUs and as many peripherals as possible
+ * S3: power off all of the chip except the Always ON (AON) island; keep DDR is
+ * self-refresh
+ * S5: (a.k.a. S3 cold boot) much like S3, except DDR is powered down, so we
+ * treat this mode like a soft power-off, with wakeup allowed from AON
+ *
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#define pr_fmt(fmt) "brcmstb-pm: " fmt
+
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kconfig.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/panic_notifier.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/printk.h>
+#include <linux/proc_fs.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/suspend.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+
+#include <asm/fncpy.h>
+#include <asm/setup.h>
+#include <asm/suspend.h>
+
+#include "pm.h"
+#include "aon_defs.h"
+
+#define SHIMPHY_DDR_PAD_CNTRL 0x8c
+
+/* Method #0 */
+#define SHIMPHY_PAD_PLL_SEQUENCE BIT(8)
+#define SHIMPHY_PAD_GATE_PLL_S3 BIT(9)
+
+/* Method #1 */
+#define PWRDWN_SEQ_NO_SEQUENCING 0
+#define PWRDWN_SEQ_HOLD_CHANNEL 1
+#define PWRDWN_SEQ_RESET_PLL 2
+#define PWRDWN_SEQ_POWERDOWN_PLL 3
+
+#define SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK 0x00f00000
+#define SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT 20
+
+#define DDR_FORCE_CKE_RST_N BIT(3)
+#define DDR_PHY_RST_N BIT(2)
+#define DDR_PHY_CKE BIT(1)
+
+#define DDR_PHY_NO_CHANNEL 0xffffffff
+
+#define MAX_NUM_MEMC 3
+
+struct brcmstb_memc {
+ void __iomem *ddr_phy_base;
+ void __iomem *ddr_shimphy_base;
+ void __iomem *ddr_ctrl;
+};
+
+struct brcmstb_pm_control {
+ void __iomem *aon_ctrl_base;
+ void __iomem *aon_sram;
+ struct brcmstb_memc memcs[MAX_NUM_MEMC];
+
+ void __iomem *boot_sram;
+ size_t boot_sram_len;
+
+ bool support_warm_boot;
+ size_t pll_status_offset;
+ int num_memc;
+
+ struct brcmstb_s3_params *s3_params;
+ dma_addr_t s3_params_pa;
+ int s3entry_method;
+ u32 warm_boot_offset;
+ u32 phy_a_standby_ctrl_offs;
+ u32 phy_b_standby_ctrl_offs;
+ bool needs_ddr_pad;
+ struct platform_device *pdev;
+};
+
+enum bsp_initiate_command {
+ BSP_CLOCK_STOP = 0x00,
+ BSP_GEN_RANDOM_KEY = 0x4A,
+ BSP_RESTORE_RANDOM_KEY = 0x55,
+ BSP_GEN_FIXED_KEY = 0x63,
+};
+
+#define PM_INITIATE 0x01
+#define PM_INITIATE_SUCCESS 0x00
+#define PM_INITIATE_FAIL 0xfe
+
+static struct brcmstb_pm_control ctrl;
+
+noinline int brcmstb_pm_s3_finish(void);
+
+static int (*brcmstb_pm_do_s2_sram)(void __iomem *aon_ctrl_base,
+ void __iomem *ddr_phy_pll_status);
+
+static int brcmstb_init_sram(struct device_node *dn)
+{
+ void __iomem *sram;
+ struct resource res;
+ int ret;
+
+ ret = of_address_to_resource(dn, 0, &res);
+ if (ret)
+ return ret;
+
+ /* Uncached, executable remapping of SRAM */
+ sram = __arm_ioremap_exec(res.start, resource_size(&res), false);
+ if (!sram)
+ return -ENOMEM;
+
+ ctrl.boot_sram = sram;
+ ctrl.boot_sram_len = resource_size(&res);
+
+ return 0;
+}
+
+static const struct of_device_id sram_dt_ids[] = {
+ { .compatible = "mmio-sram" },
+ { /* sentinel */ }
+};
+
+static int do_bsp_initiate_command(enum bsp_initiate_command cmd)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+ int ret;
+ int timeo = 1000 * 1000; /* 1 second */
+
+ writel_relaxed(0, base + AON_CTRL_PM_INITIATE);
+ (void)readl_relaxed(base + AON_CTRL_PM_INITIATE);
+
+ /* Go! */
+ writel_relaxed((cmd << 1) | PM_INITIATE, base + AON_CTRL_PM_INITIATE);
+
+ /*
+ * If firmware doesn't support the 'ack', then just assume it's done
+ * after 10ms. Note that this only works for command 0, BSP_CLOCK_STOP
+ */
+ if (of_machine_is_compatible("brcm,bcm74371a0")) {
+ (void)readl_relaxed(base + AON_CTRL_PM_INITIATE);
+ mdelay(10);
+ return 0;
+ }
+
+ for (;;) {
+ ret = readl_relaxed(base + AON_CTRL_PM_INITIATE);
+ if (!(ret & PM_INITIATE))
+ break;
+ if (timeo <= 0) {
+ pr_err("error: timeout waiting for BSP (%x)\n", ret);
+ break;
+ }
+ timeo -= 50;
+ udelay(50);
+ }
+
+ return (ret & 0xff) != PM_INITIATE_SUCCESS;
+}
+
+static int brcmstb_pm_handshake(void)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+ u32 tmp;
+ int ret;
+
+ /* BSP power handshake, v1 */
+ tmp = readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS);
+ tmp &= ~1UL;
+ writel_relaxed(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+ (void)readl_relaxed(base + AON_CTRL_HOST_MISC_CMDS);
+
+ ret = do_bsp_initiate_command(BSP_CLOCK_STOP);
+ if (ret)
+ pr_err("BSP handshake failed\n");
+
+ /*
+ * HACK: BSP may have internal race on the CLOCK_STOP command.
+ * Avoid touching the BSP for a few milliseconds.
+ */
+ mdelay(3);
+
+ return ret;
+}
+
+static inline void shimphy_set(u32 value, u32 mask)
+{
+ int i;
+
+ if (!ctrl.needs_ddr_pad)
+ return;
+
+ for (i = 0; i < ctrl.num_memc; i++) {
+ u32 tmp;
+
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_shimphy_base +
+ SHIMPHY_DDR_PAD_CNTRL);
+ tmp = value | (tmp & mask);
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_shimphy_base +
+ SHIMPHY_DDR_PAD_CNTRL);
+ }
+ wmb(); /* Complete sequence in order. */
+}
+
+static inline void ddr_ctrl_set(bool warmboot)
+{
+ int i;
+
+ for (i = 0; i < ctrl.num_memc; i++) {
+ u32 tmp;
+
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_ctrl +
+ ctrl.warm_boot_offset);
+ if (warmboot)
+ tmp |= 1;
+ else
+ tmp &= ~1; /* Cold boot */
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_ctrl +
+ ctrl.warm_boot_offset);
+ }
+ /* Complete sequence in order */
+ wmb();
+}
+
+static inline void s3entry_method0(void)
+{
+ shimphy_set(SHIMPHY_PAD_GATE_PLL_S3 | SHIMPHY_PAD_PLL_SEQUENCE,
+ 0xffffffff);
+}
+
+static inline void s3entry_method1(void)
+{
+ /*
+ * S3 Entry Sequence
+ * -----------------
+ * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3
+ * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 1
+ */
+ shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+
+ ddr_ctrl_set(true);
+}
+
+static inline void s5entry_method1(void)
+{
+ int i;
+
+ /*
+ * S5 Entry Sequence
+ * -----------------
+ * Step 1: SHIMPHY_ADDR_CNTL_0_DDR_PAD_CNTRL [ S3_PWRDWN_SEQ ] = 3
+ * Step 2: MEMC_DDR_0_WARM_BOOT [ WARM_BOOT ] = 0
+ * Step 3: DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ CKE ] = 0
+ * DDR_PHY_CONTROL_REGS_[AB]_0_STANDBY_CONTROL[ RST_N ] = 0
+ */
+ shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+
+ ddr_ctrl_set(false);
+
+ for (i = 0; i < ctrl.num_memc; i++) {
+ u32 tmp;
+
+ /* Step 3: Channel A (RST_N = CKE = 0) */
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_a_standby_ctrl_offs);
+ tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N);
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_a_standby_ctrl_offs);
+
+ /* Step 3: Channel B? */
+ if (ctrl.phy_b_standby_ctrl_offs != DDR_PHY_NO_CHANNEL) {
+ tmp = readl_relaxed(ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_b_standby_ctrl_offs);
+ tmp &= ~(DDR_PHY_RST_N | DDR_PHY_RST_N);
+ writel_relaxed(tmp, ctrl.memcs[i].ddr_phy_base +
+ ctrl.phy_b_standby_ctrl_offs);
+ }
+ }
+ /* Must complete */
+ wmb();
+}
+
+/*
+ * Run a Power Management State Machine (PMSM) shutdown command and put the CPU
+ * into a low-power mode
+ */
+static void brcmstb_do_pmsm_power_down(unsigned long base_cmd, bool onewrite)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+
+ if ((ctrl.s3entry_method == 1) && (base_cmd == PM_COLD_CONFIG))
+ s5entry_method1();
+
+ /* pm_start_pwrdn transition 0->1 */
+ writel_relaxed(base_cmd, base + AON_CTRL_PM_CTRL);
+
+ if (!onewrite) {
+ (void)readl_relaxed(base + AON_CTRL_PM_CTRL);
+
+ writel_relaxed(base_cmd | PM_PWR_DOWN, base + AON_CTRL_PM_CTRL);
+ (void)readl_relaxed(base + AON_CTRL_PM_CTRL);
+ }
+ wfi();
+}
+
+/* Support S5 cold boot out of "poweroff" */
+static void brcmstb_pm_poweroff(void)
+{
+ brcmstb_pm_handshake();
+
+ /* Clear magic S3 warm-boot value */
+ writel_relaxed(0, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+ (void)readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+ /* Skip wait-for-interrupt signal; just use a countdown */
+ writel_relaxed(0x10, ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+ (void)readl_relaxed(ctrl.aon_ctrl_base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+ if (ctrl.s3entry_method == 1) {
+ shimphy_set((PWRDWN_SEQ_POWERDOWN_PLL <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+ ddr_ctrl_set(false);
+ brcmstb_do_pmsm_power_down(M1_PM_COLD_CONFIG, true);
+ return; /* We should never actually get here */
+ }
+
+ brcmstb_do_pmsm_power_down(PM_COLD_CONFIG, false);
+}
+
+static void *brcmstb_pm_copy_to_sram(void *fn, size_t len)
+{
+ unsigned int size = ALIGN(len, FNCPY_ALIGN);
+
+ if (ctrl.boot_sram_len < size) {
+ pr_err("standby code will not fit in SRAM\n");
+ return NULL;
+ }
+
+ return fncpy(ctrl.boot_sram, fn, size);
+}
+
+/*
+ * S2 suspend/resume picks up where we left off, so we must execute carefully
+ * from SRAM, in order to allow DDR to come back up safely before we continue.
+ */
+static int brcmstb_pm_s2(void)
+{
+ /* A previous S3 can set a value hazardous to S2, so make sure. */
+ if (ctrl.s3entry_method == 1) {
+ shimphy_set((PWRDWN_SEQ_NO_SEQUENCING <<
+ SHIMPHY_PAD_S3_PWRDWN_SEQ_SHIFT),
+ ~SHIMPHY_PAD_S3_PWRDWN_SEQ_MASK);
+ ddr_ctrl_set(false);
+ }
+
+ brcmstb_pm_do_s2_sram = brcmstb_pm_copy_to_sram(&brcmstb_pm_do_s2,
+ brcmstb_pm_do_s2_sz);
+ if (!brcmstb_pm_do_s2_sram)
+ return -EINVAL;
+
+ return brcmstb_pm_do_s2_sram(ctrl.aon_ctrl_base,
+ ctrl.memcs[0].ddr_phy_base +
+ ctrl.pll_status_offset);
+}
+
+/*
+ * This function is called on a new stack, so don't allow inlining (which will
+ * generate stack references on the old stack). It cannot be made static because
+ * it is referenced from brcmstb_pm_s3()
+ */
+noinline int brcmstb_pm_s3_finish(void)
+{
+ struct brcmstb_s3_params *params = ctrl.s3_params;
+ dma_addr_t params_pa = ctrl.s3_params_pa;
+ phys_addr_t reentry = virt_to_phys(&cpu_resume_arm);
+ enum bsp_initiate_command cmd;
+ u32 flags;
+
+ /*
+ * Clear parameter structure, but not DTU area, which has already been
+ * filled in. We know DTU is a the end, so we can just subtract its
+ * size.
+ */
+ memset(params, 0, sizeof(*params) - sizeof(params->dtu));
+
+ flags = readl_relaxed(ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+
+ flags &= S3_BOOTLOADER_RESERVED;
+ flags |= S3_FLAG_NO_MEM_VERIFY;
+ flags |= S3_FLAG_LOAD_RANDKEY;
+
+ /* Load random / fixed key */
+ if (flags & S3_FLAG_LOAD_RANDKEY)
+ cmd = BSP_GEN_RANDOM_KEY;
+ else
+ cmd = BSP_GEN_FIXED_KEY;
+ if (do_bsp_initiate_command(cmd)) {
+ pr_info("key loading failed\n");
+ return -EIO;
+ }
+
+ params->magic = BRCMSTB_S3_MAGIC;
+ params->reentry = reentry;
+
+ /* No more writes to DRAM */
+ flush_cache_all();
+
+ flags |= BRCMSTB_S3_MAGIC_SHORT;
+
+ writel_relaxed(flags, ctrl.aon_sram + AON_REG_MAGIC_FLAGS);
+ writel_relaxed(lower_32_bits(params_pa),
+ ctrl.aon_sram + AON_REG_CONTROL_LOW);
+ writel_relaxed(upper_32_bits(params_pa),
+ ctrl.aon_sram + AON_REG_CONTROL_HIGH);
+
+ switch (ctrl.s3entry_method) {
+ case 0:
+ s3entry_method0();
+ brcmstb_do_pmsm_power_down(PM_WARM_CONFIG, false);
+ break;
+ case 1:
+ s3entry_method1();
+ brcmstb_do_pmsm_power_down(M1_PM_WARM_CONFIG, true);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Must have been interrupted from wfi()? */
+ return -EINTR;
+}
+
+static int brcmstb_pm_do_s3(unsigned long sp)
+{
+ unsigned long save_sp;
+ int ret;
+
+ asm volatile (
+ "mov %[save], sp\n"
+ "mov sp, %[new]\n"
+ "bl brcmstb_pm_s3_finish\n"
+ "mov %[ret], r0\n"
+ "mov %[new], sp\n"
+ "mov sp, %[save]\n"
+ : [save] "=&r" (save_sp), [ret] "=&r" (ret)
+ : [new] "r" (sp)
+ );
+
+ return ret;
+}
+
+static int brcmstb_pm_s3(void)
+{
+ void __iomem *sp = ctrl.boot_sram + ctrl.boot_sram_len;
+
+ return cpu_suspend((unsigned long)sp, brcmstb_pm_do_s3);
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+ int ret;
+
+ if (brcmstb_pm_handshake())
+ return -EIO;
+
+ if (deep_standby)
+ ret = brcmstb_pm_s3();
+ else
+ ret = brcmstb_pm_s2();
+ if (ret)
+ pr_err("%s: standby failed\n", __func__);
+
+ return ret;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+ int ret = -EINVAL;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ ret = brcmstb_pm_standby(false);
+ break;
+ case PM_SUSPEND_MEM:
+ ret = brcmstb_pm_standby(true);
+ break;
+ }
+
+ return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return true;
+ case PM_SUSPEND_MEM:
+ return ctrl.support_warm_boot;
+ default:
+ return false;
+ }
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+ .enter = brcmstb_pm_enter,
+ .valid = brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-aon-ctrl" },
+ {}
+};
+
+struct ddr_phy_ofdata {
+ bool supports_warm_boot;
+ size_t pll_status_offset;
+ int s3entry_method;
+ u32 warm_boot_offset;
+ u32 phy_a_standby_ctrl_offs;
+ u32 phy_b_standby_ctrl_offs;
+};
+
+static struct ddr_phy_ofdata ddr_phy_71_1 = {
+ .supports_warm_boot = true,
+ .pll_status_offset = 0x0c,
+ .s3entry_method = 1,
+ .warm_boot_offset = 0x2c,
+ .phy_a_standby_ctrl_offs = 0x198,
+ .phy_b_standby_ctrl_offs = DDR_PHY_NO_CHANNEL
+};
+
+static struct ddr_phy_ofdata ddr_phy_72_0 = {
+ .supports_warm_boot = true,
+ .pll_status_offset = 0x10,
+ .s3entry_method = 1,
+ .warm_boot_offset = 0x40,
+ .phy_a_standby_ctrl_offs = 0x2a4,
+ .phy_b_standby_ctrl_offs = 0x8a4
+};
+
+static struct ddr_phy_ofdata ddr_phy_225_1 = {
+ .supports_warm_boot = false,
+ .pll_status_offset = 0x4,
+ .s3entry_method = 0
+};
+
+static struct ddr_phy_ofdata ddr_phy_240_1 = {
+ .supports_warm_boot = true,
+ .pll_status_offset = 0x4,
+ .s3entry_method = 0
+};
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v71.1",
+ .data = &ddr_phy_71_1,
+ },
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v72.0",
+ .data = &ddr_phy_72_0,
+ },
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v225.1",
+ .data = &ddr_phy_225_1,
+ },
+ {
+ .compatible = "brcm,brcmstb-ddr-phy-v240.1",
+ .data = &ddr_phy_240_1,
+ },
+ {
+ /* Same as v240.1, for the registers we care about */
+ .compatible = "brcm,brcmstb-ddr-phy-v240.2",
+ .data = &ddr_phy_240_1,
+ },
+ {}
+};
+
+struct ddr_seq_ofdata {
+ bool needs_ddr_pad;
+ u32 warm_boot_offset;
+};
+
+static const struct ddr_seq_ofdata ddr_seq_b22 = {
+ .needs_ddr_pad = false,
+ .warm_boot_offset = 0x2c,
+};
+
+static const struct ddr_seq_ofdata ddr_seq = {
+ .needs_ddr_pad = true,
+};
+
+static const struct of_device_id ddr_shimphy_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-ddr-shimphy-v1.0" },
+ {}
+};
+
+static const struct of_device_id brcmstb_memc_of_match[] = {
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.1",
+ .data = &ddr_seq,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.2",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.2.3",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.0",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr-rev-b.3.1",
+ .data = &ddr_seq_b22,
+ },
+ {
+ .compatible = "brcm,brcmstb-memc-ddr",
+ .data = &ddr_seq,
+ },
+ {},
+};
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+ int index, const void **ofdata)
+{
+ struct device_node *dn;
+ const struct of_device_id *match;
+
+ dn = of_find_matching_node_and_match(NULL, matches, &match);
+ if (!dn)
+ return ERR_PTR(-EINVAL);
+
+ if (ofdata)
+ *ofdata = match->data;
+
+ return of_io_request_and_map(dn, index, dn->full_name);
+}
+/*
+ * The AON is a small domain in the SoC that can retain its state across
+ * various system wide sleep states and specific reset conditions; the
+ * AON DATA RAM is a small RAM of a few words (< 1KB) which can store
+ * persistent information across such events.
+ *
+ * The purpose of the below panic notifier is to help with notifying
+ * the bootloader that a panic occurred and so that it should try its
+ * best to preserve the DRAM contents holding that buffer for recovery
+ * by the kernel as opposed to wiping out DRAM clean again.
+ *
+ * Reference: comment from Florian Fainelli, at
+ * https://lore.kernel.org/lkml/781cafb0-8d06-8b56-907a-5175c2da196a@gmail.com
+ */
+static int brcmstb_pm_panic_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ writel_relaxed(BRCMSTB_PANIC_MAGIC, ctrl.aon_sram + AON_REG_PANIC);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block brcmstb_pm_panic_nb = {
+ .notifier_call = brcmstb_pm_panic_notify,
+};
+
+static int brcmstb_pm_probe(struct platform_device *pdev)
+{
+ const struct ddr_phy_ofdata *ddr_phy_data;
+ const struct ddr_seq_ofdata *ddr_seq_data;
+ const struct of_device_id *of_id = NULL;
+ struct device_node *dn;
+ void __iomem *base;
+ int ret, i, s;
+
+ /* AON ctrl registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping AON_CTRL\n");
+ ret = PTR_ERR(base);
+ goto aon_err;
+ }
+ ctrl.aon_ctrl_base = base;
+
+ /* AON SRAM registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+ if (IS_ERR(base)) {
+ /* Assume standard offset */
+ ctrl.aon_sram = ctrl.aon_ctrl_base +
+ AON_CTRL_SYSTEM_DATA_RAM_OFS;
+ s = 0;
+ } else {
+ ctrl.aon_sram = base;
+ s = 1;
+ }
+
+ writel_relaxed(0, ctrl.aon_sram + AON_REG_PANIC);
+
+ /* DDR PHY registers */
+ base = brcmstb_ioremap_match(ddr_phy_dt_ids, 0,
+ (const void **)&ddr_phy_data);
+ if (IS_ERR(base)) {
+ pr_err("error mapping DDR PHY\n");
+ ret = PTR_ERR(base);
+ goto ddr_phy_err;
+ }
+ ctrl.support_warm_boot = ddr_phy_data->supports_warm_boot;
+ ctrl.pll_status_offset = ddr_phy_data->pll_status_offset;
+ /* Only need DDR PHY 0 for now? */
+ ctrl.memcs[0].ddr_phy_base = base;
+ ctrl.s3entry_method = ddr_phy_data->s3entry_method;
+ ctrl.phy_a_standby_ctrl_offs = ddr_phy_data->phy_a_standby_ctrl_offs;
+ ctrl.phy_b_standby_ctrl_offs = ddr_phy_data->phy_b_standby_ctrl_offs;
+ /*
+ * Slightly gross to use the phy ver to get a memc,
+ * offset but that is the only versioned things so far
+ * we can test for.
+ */
+ ctrl.warm_boot_offset = ddr_phy_data->warm_boot_offset;
+
+ /* DDR SHIM-PHY registers */
+ for_each_matching_node(dn, ddr_shimphy_dt_ids) {
+ i = ctrl.num_memc;
+ if (i >= MAX_NUM_MEMC) {
+ of_node_put(dn);
+ pr_warn("too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+ break;
+ }
+
+ base = of_io_request_and_map(dn, 0, dn->full_name);
+ if (IS_ERR(base)) {
+ of_node_put(dn);
+ if (!ctrl.support_warm_boot)
+ break;
+
+ pr_err("error mapping DDR SHIMPHY %d\n", i);
+ ret = PTR_ERR(base);
+ goto ddr_shimphy_err;
+ }
+ ctrl.memcs[i].ddr_shimphy_base = base;
+ ctrl.num_memc++;
+ }
+
+ /* Sequencer DRAM Param and Control Registers */
+ i = 0;
+ for_each_matching_node(dn, brcmstb_memc_of_match) {
+ base = of_iomap(dn, 0);
+ if (!base) {
+ of_node_put(dn);
+ pr_err("error mapping DDR Sequencer %d\n", i);
+ ret = -ENOMEM;
+ goto brcmstb_memc_err;
+ }
+
+ of_id = of_match_node(brcmstb_memc_of_match, dn);
+ if (!of_id) {
+ iounmap(base);
+ of_node_put(dn);
+ ret = -EINVAL;
+ goto brcmstb_memc_err;
+ }
+
+ ddr_seq_data = of_id->data;
+ ctrl.needs_ddr_pad = ddr_seq_data->needs_ddr_pad;
+ /* Adjust warm boot offset based on the DDR sequencer */
+ if (ddr_seq_data->warm_boot_offset)
+ ctrl.warm_boot_offset = ddr_seq_data->warm_boot_offset;
+
+ ctrl.memcs[i].ddr_ctrl = base;
+ i++;
+ }
+
+ pr_debug("PM: supports warm boot:%d, method:%d, wboffs:%x\n",
+ ctrl.support_warm_boot, ctrl.s3entry_method,
+ ctrl.warm_boot_offset);
+
+ dn = of_find_matching_node(NULL, sram_dt_ids);
+ if (!dn) {
+ pr_err("SRAM not found\n");
+ ret = -EINVAL;
+ goto brcmstb_memc_err;
+ }
+
+ ret = brcmstb_init_sram(dn);
+ of_node_put(dn);
+ if (ret) {
+ pr_err("error setting up SRAM for PM\n");
+ goto brcmstb_memc_err;
+ }
+
+ ctrl.pdev = pdev;
+
+ ctrl.s3_params = kmalloc(sizeof(*ctrl.s3_params), GFP_KERNEL);
+ if (!ctrl.s3_params) {
+ ret = -ENOMEM;
+ goto s3_params_err;
+ }
+ ctrl.s3_params_pa = dma_map_single(&pdev->dev, ctrl.s3_params,
+ sizeof(*ctrl.s3_params),
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, ctrl.s3_params_pa)) {
+ pr_err("error mapping DMA memory\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &brcmstb_pm_panic_nb);
+
+ pm_power_off = brcmstb_pm_poweroff;
+ suspend_set_ops(&brcmstb_pm_ops);
+
+ return 0;
+
+out:
+ kfree(ctrl.s3_params);
+s3_params_err:
+ iounmap(ctrl.boot_sram);
+brcmstb_memc_err:
+ for (i--; i >= 0; i--)
+ iounmap(ctrl.memcs[i].ddr_ctrl);
+ddr_shimphy_err:
+ for (i = 0; i < ctrl.num_memc; i++)
+ iounmap(ctrl.memcs[i].ddr_shimphy_base);
+
+ iounmap(ctrl.memcs[0].ddr_phy_base);
+ddr_phy_err:
+ iounmap(ctrl.aon_ctrl_base);
+ if (s)
+ iounmap(ctrl.aon_sram);
+aon_err:
+ pr_warn("PM: initialization failed with code %d\n", ret);
+
+ return ret;
+}
+
+static struct platform_driver brcmstb_pm_driver = {
+ .driver = {
+ .name = "brcmstb-pm",
+ .of_match_table = aon_ctrl_dt_ids,
+ },
+};
+
+static int __init brcmstb_pm_init(void)
+{
+ return platform_driver_probe(&brcmstb_pm_driver,
+ brcmstb_pm_probe);
+}
+module_init(brcmstb_pm_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm-mips.c b/drivers/soc/bcm/brcmstb/pm/pm-mips.c
new file mode 100644
index 000000000..4dfb5a850
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm-mips.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MIPS-specific support for Broadcom STB S2/S3/S5 power management
+ *
+ * Copyright (C) 2016-2017 Broadcom
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/suspend.h>
+#include <asm/bmips.h>
+#include <asm/tlbflush.h>
+
+#include "pm.h"
+
+#define S2_NUM_PARAMS 6
+#define MAX_NUM_MEMC 3
+
+/* S3 constants */
+#define MAX_GP_REGS 16
+#define MAX_CP0_REGS 32
+#define NUM_MEMC_CLIENTS 128
+#define AON_CTRL_RAM_SIZE 128
+#define BRCMSTB_S3_MAGIC 0x5AFEB007
+
+#define CLEAR_RESET_MASK 0x01
+
+/* Index each CP0 register that needs to be saved */
+#define CONTEXT 0
+#define USER_LOCAL 1
+#define PGMK 2
+#define HWRENA 3
+#define COMPARE 4
+#define STATUS 5
+#define CONFIG 6
+#define MODE 7
+#define EDSP 8
+#define BOOT_VEC 9
+#define EBASE 10
+
+struct brcmstb_memc {
+ void __iomem *ddr_phy_base;
+ void __iomem *arb_base;
+};
+
+struct brcmstb_pm_control {
+ void __iomem *aon_ctrl_base;
+ void __iomem *aon_sram_base;
+ void __iomem *timers_base;
+ struct brcmstb_memc memcs[MAX_NUM_MEMC];
+ int num_memc;
+};
+
+struct brcm_pm_s3_context {
+ u32 cp0_regs[MAX_CP0_REGS];
+ u32 memc0_rts[NUM_MEMC_CLIENTS];
+ u32 sc_boot_vec;
+};
+
+struct brcmstb_mem_transfer;
+
+struct brcmstb_mem_transfer {
+ struct brcmstb_mem_transfer *next;
+ void *src;
+ void *dst;
+ dma_addr_t pa_src;
+ dma_addr_t pa_dst;
+ u32 len;
+ u8 key;
+ u8 mode;
+ u8 src_remapped;
+ u8 dst_remapped;
+ u8 src_dst_remapped;
+};
+
+#define AON_SAVE_SRAM(base, idx, val) \
+ __raw_writel(val, base + (idx << 2))
+
+/* Used for saving registers in asm */
+u32 gp_regs[MAX_GP_REGS];
+
+#define BSP_CLOCK_STOP 0x00
+#define PM_INITIATE 0x01
+
+static struct brcmstb_pm_control ctrl;
+
+static void brcm_pm_save_cp0_context(struct brcm_pm_s3_context *ctx)
+{
+ /* Generic MIPS */
+ ctx->cp0_regs[CONTEXT] = read_c0_context();
+ ctx->cp0_regs[USER_LOCAL] = read_c0_userlocal();
+ ctx->cp0_regs[PGMK] = read_c0_pagemask();
+ ctx->cp0_regs[HWRENA] = read_c0_cache();
+ ctx->cp0_regs[COMPARE] = read_c0_compare();
+ ctx->cp0_regs[STATUS] = read_c0_status();
+
+ /* Broadcom specific */
+ ctx->cp0_regs[CONFIG] = read_c0_brcm_config();
+ ctx->cp0_regs[MODE] = read_c0_brcm_mode();
+ ctx->cp0_regs[EDSP] = read_c0_brcm_edsp();
+ ctx->cp0_regs[BOOT_VEC] = read_c0_brcm_bootvec();
+ ctx->cp0_regs[EBASE] = read_c0_ebase();
+
+ ctx->sc_boot_vec = bmips_read_zscm_reg(0xa0);
+}
+
+static void brcm_pm_restore_cp0_context(struct brcm_pm_s3_context *ctx)
+{
+ /* Restore cp0 state */
+ bmips_write_zscm_reg(0xa0, ctx->sc_boot_vec);
+
+ /* Generic MIPS */
+ write_c0_context(ctx->cp0_regs[CONTEXT]);
+ write_c0_userlocal(ctx->cp0_regs[USER_LOCAL]);
+ write_c0_pagemask(ctx->cp0_regs[PGMK]);
+ write_c0_cache(ctx->cp0_regs[HWRENA]);
+ write_c0_compare(ctx->cp0_regs[COMPARE]);
+ write_c0_status(ctx->cp0_regs[STATUS]);
+
+ /* Broadcom specific */
+ write_c0_brcm_config(ctx->cp0_regs[CONFIG]);
+ write_c0_brcm_mode(ctx->cp0_regs[MODE]);
+ write_c0_brcm_edsp(ctx->cp0_regs[EDSP]);
+ write_c0_brcm_bootvec(ctx->cp0_regs[BOOT_VEC]);
+ write_c0_ebase(ctx->cp0_regs[EBASE]);
+}
+
+static void brcmstb_pm_handshake(void)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+ u32 tmp;
+
+ /* BSP power handshake, v1 */
+ tmp = __raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+ tmp &= ~1UL;
+ __raw_writel(tmp, base + AON_CTRL_HOST_MISC_CMDS);
+ (void)__raw_readl(base + AON_CTRL_HOST_MISC_CMDS);
+
+ __raw_writel(0, base + AON_CTRL_PM_INITIATE);
+ (void)__raw_readl(base + AON_CTRL_PM_INITIATE);
+ __raw_writel(BSP_CLOCK_STOP | PM_INITIATE,
+ base + AON_CTRL_PM_INITIATE);
+ /*
+ * HACK: BSP may have internal race on the CLOCK_STOP command.
+ * Avoid touching the BSP for a few milliseconds.
+ */
+ mdelay(3);
+}
+
+static void brcmstb_pm_s5(void)
+{
+ void __iomem *base = ctrl.aon_ctrl_base;
+
+ brcmstb_pm_handshake();
+
+ /* Clear magic s3 warm-boot value */
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 0, 0);
+
+ /* Set the countdown */
+ __raw_writel(0x10, base + AON_CTRL_PM_CPU_WAIT_COUNT);
+ (void)__raw_readl(base + AON_CTRL_PM_CPU_WAIT_COUNT);
+
+ /* Prepare to S5 cold boot */
+ __raw_writel(PM_COLD_CONFIG, base + AON_CTRL_PM_CTRL);
+ (void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+ __raw_writel((PM_COLD_CONFIG | PM_PWR_DOWN), base +
+ AON_CTRL_PM_CTRL);
+ (void)__raw_readl(base + AON_CTRL_PM_CTRL);
+
+ __asm__ __volatile__(
+ " wait\n"
+ : : : "memory");
+}
+
+static int brcmstb_pm_s3(void)
+{
+ struct brcm_pm_s3_context s3_context;
+ void __iomem *memc_arb_base;
+ unsigned long flags;
+ u32 tmp;
+ int i;
+
+ /* Prepare for s3 */
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 0, BRCMSTB_S3_MAGIC);
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 1, (u32)&s3_reentry);
+ AON_SAVE_SRAM(ctrl.aon_sram_base, 2, 0);
+
+ /* Clear RESET_HISTORY */
+ tmp = __raw_readl(ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL);
+ tmp &= ~CLEAR_RESET_MASK;
+ __raw_writel(tmp, ctrl.aon_ctrl_base + AON_CTRL_RESET_CTRL);
+
+ local_irq_save(flags);
+
+ /* Inhibit DDR_RSTb pulse for both MMCs*/
+ for (i = 0; i < ctrl.num_memc; i++) {
+ tmp = __raw_readl(ctrl.memcs[i].ddr_phy_base +
+ DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+
+ tmp &= ~0x0f;
+ __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base +
+ DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+ tmp |= (0x05 | BIT(5));
+ __raw_writel(tmp, ctrl.memcs[i].ddr_phy_base +
+ DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL);
+ }
+
+ /* Save CP0 context */
+ brcm_pm_save_cp0_context(&s3_context);
+
+ /* Save RTS(skip debug register) */
+ memc_arb_base = ctrl.memcs[0].arb_base + 4;
+ for (i = 0; i < NUM_MEMC_CLIENTS; i++) {
+ s3_context.memc0_rts[i] = __raw_readl(memc_arb_base);
+ memc_arb_base += 4;
+ }
+
+ /* Save I/O context */
+ local_flush_tlb_all();
+ _dma_cache_wback_inv(0, ~0);
+
+ brcm_pm_do_s3(ctrl.aon_ctrl_base, current_cpu_data.dcache.linesz);
+
+ /* CPU reconfiguration */
+ local_flush_tlb_all();
+ bmips_cpu_setup();
+ cpumask_clear(&bmips_booted_mask);
+
+ /* Restore RTS (skip debug register) */
+ memc_arb_base = ctrl.memcs[0].arb_base + 4;
+ for (i = 0; i < NUM_MEMC_CLIENTS; i++) {
+ __raw_writel(s3_context.memc0_rts[i], memc_arb_base);
+ memc_arb_base += 4;
+ }
+
+ /* restore CP0 context */
+ brcm_pm_restore_cp0_context(&s3_context);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int brcmstb_pm_s2(void)
+{
+ /*
+ * We need to pass 6 arguments to an assembly function. Lets avoid the
+ * stack and pass arguments in a explicit 4 byte array. The assembly
+ * code assumes all arguments are 4 bytes and arguments are ordered
+ * like so:
+ *
+ * 0: AON_CTRl base register
+ * 1: DDR_PHY base register
+ * 2: TIMERS base resgister
+ * 3: I-Cache line size
+ * 4: Restart vector address
+ * 5: Restart vector size
+ */
+ u32 s2_params[6];
+
+ /* Prepare s2 parameters */
+ s2_params[0] = (u32)ctrl.aon_ctrl_base;
+ s2_params[1] = (u32)ctrl.memcs[0].ddr_phy_base;
+ s2_params[2] = (u32)ctrl.timers_base;
+ s2_params[3] = (u32)current_cpu_data.icache.linesz;
+ s2_params[4] = (u32)BMIPS_WARM_RESTART_VEC;
+ s2_params[5] = (u32)(bmips_smp_int_vec_end -
+ bmips_smp_int_vec);
+
+ /* Drop to standby */
+ brcm_pm_do_s2(s2_params);
+
+ return 0;
+}
+
+static int brcmstb_pm_standby(bool deep_standby)
+{
+ brcmstb_pm_handshake();
+
+ /* Send IRQs to BMIPS_WARM_RESTART_VEC */
+ clear_c0_cause(CAUSEF_IV);
+ irq_disable_hazard();
+ set_c0_status(ST0_BEV);
+ irq_disable_hazard();
+
+ if (deep_standby)
+ brcmstb_pm_s3();
+ else
+ brcmstb_pm_s2();
+
+ /* Send IRQs to normal runtime vectors */
+ clear_c0_status(ST0_BEV);
+ irq_disable_hazard();
+ set_c0_cause(CAUSEF_IV);
+ irq_disable_hazard();
+
+ return 0;
+}
+
+static int brcmstb_pm_enter(suspend_state_t state)
+{
+ int ret = -EINVAL;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ ret = brcmstb_pm_standby(false);
+ break;
+ case PM_SUSPEND_MEM:
+ ret = brcmstb_pm_standby(true);
+ break;
+ }
+
+ return ret;
+}
+
+static int brcmstb_pm_valid(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ return true;
+ case PM_SUSPEND_MEM:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct platform_suspend_ops brcmstb_pm_ops = {
+ .enter = brcmstb_pm_enter,
+ .valid = brcmstb_pm_valid,
+};
+
+static const struct of_device_id aon_ctrl_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-aon-ctrl" },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id ddr_phy_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-ddr-phy" },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id arb_dt_ids[] = {
+ { .compatible = "brcm,brcmstb-memc-arb" },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id timers_ids[] = {
+ { .compatible = "brcm,brcmstb-timers" },
+ { /* sentinel */ }
+};
+
+static inline void __iomem *brcmstb_ioremap_node(struct device_node *dn,
+ int index)
+{
+ return of_io_request_and_map(dn, index, dn->full_name);
+}
+
+static void __iomem *brcmstb_ioremap_match(const struct of_device_id *matches,
+ int index, const void **ofdata)
+{
+ struct device_node *dn;
+ const struct of_device_id *match;
+
+ dn = of_find_matching_node_and_match(NULL, matches, &match);
+ if (!dn)
+ return ERR_PTR(-EINVAL);
+
+ if (ofdata)
+ *ofdata = match->data;
+
+ return brcmstb_ioremap_node(dn, index);
+}
+
+static int brcmstb_pm_init(void)
+{
+ struct device_node *dn;
+ void __iomem *base;
+ int i;
+
+ /* AON ctrl registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping AON_CTRL\n");
+ goto aon_err;
+ }
+ ctrl.aon_ctrl_base = base;
+
+ /* AON SRAM registers */
+ base = brcmstb_ioremap_match(aon_ctrl_dt_ids, 1, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping AON_SRAM\n");
+ goto sram_err;
+ }
+ ctrl.aon_sram_base = base;
+
+ ctrl.num_memc = 0;
+ /* Map MEMC DDR PHY registers */
+ for_each_matching_node(dn, ddr_phy_dt_ids) {
+ i = ctrl.num_memc;
+ if (i >= MAX_NUM_MEMC) {
+ pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC);
+ of_node_put(dn);
+ break;
+ }
+ base = brcmstb_ioremap_node(dn, 0);
+ if (IS_ERR(base)) {
+ of_node_put(dn);
+ goto ddr_err;
+ }
+
+ ctrl.memcs[i].ddr_phy_base = base;
+ ctrl.num_memc++;
+ }
+
+ /* MEMC ARB registers */
+ base = brcmstb_ioremap_match(arb_dt_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping MEMC ARB\n");
+ goto ddr_err;
+ }
+ ctrl.memcs[0].arb_base = base;
+
+ /* Timer registers */
+ base = brcmstb_ioremap_match(timers_ids, 0, NULL);
+ if (IS_ERR(base)) {
+ pr_err("error mapping timers\n");
+ goto tmr_err;
+ }
+ ctrl.timers_base = base;
+
+ /* s3 cold boot aka s5 */
+ pm_power_off = brcmstb_pm_s5;
+
+ suspend_set_ops(&brcmstb_pm_ops);
+
+ return 0;
+
+tmr_err:
+ iounmap(ctrl.memcs[0].arb_base);
+ddr_err:
+ for (i = 0; i < ctrl.num_memc; i++)
+ iounmap(ctrl.memcs[i].ddr_phy_base);
+
+ iounmap(ctrl.aon_sram_base);
+sram_err:
+ iounmap(ctrl.aon_ctrl_base);
+aon_err:
+ return PTR_ERR(base);
+}
+arch_initcall(brcmstb_pm_init);
diff --git a/drivers/soc/bcm/brcmstb/pm/pm.h b/drivers/soc/bcm/brcmstb/pm/pm.h
new file mode 100644
index 000000000..94a380470
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/pm.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Definitions for Broadcom STB power management / Always ON (AON) block
+ *
+ * Copyright © 2016-2017 Broadcom
+ */
+
+#ifndef __BRCMSTB_PM_H__
+#define __BRCMSTB_PM_H__
+
+#define AON_CTRL_RESET_CTRL 0x00
+#define AON_CTRL_PM_CTRL 0x04
+#define AON_CTRL_PM_STATUS 0x08
+#define AON_CTRL_PM_CPU_WAIT_COUNT 0x10
+#define AON_CTRL_PM_INITIATE 0x88
+#define AON_CTRL_HOST_MISC_CMDS 0x8c
+#define AON_CTRL_SYSTEM_DATA_RAM_OFS 0x200
+
+/* MIPS PM constants */
+/* MEMC0 offsets */
+#define DDR40_PHY_CONTROL_REGS_0_PLL_STATUS 0x10
+#define DDR40_PHY_CONTROL_REGS_0_STANDBY_CTRL 0xa4
+
+/* TIMER offsets */
+#define TIMER_TIMER1_CTRL 0x0c
+#define TIMER_TIMER1_STAT 0x1c
+
+/* TIMER defines */
+#define RESET_TIMER 0x0
+#define START_TIMER 0xbfffffff
+#define TIMER_MASK 0x3fffffff
+
+/* PM_CTRL bitfield (Method #0) */
+#define PM_FAST_PWRDOWN (1 << 6)
+#define PM_WARM_BOOT (1 << 5)
+#define PM_DEEP_STANDBY (1 << 4)
+#define PM_CPU_PWR (1 << 3)
+#define PM_USE_CPU_RDY (1 << 2)
+#define PM_PLL_PWRDOWN (1 << 1)
+#define PM_PWR_DOWN (1 << 0)
+
+/* PM_CTRL bitfield (Method #1) */
+#define PM_DPHY_STANDBY_CLEAR (1 << 20)
+#define PM_MIN_S3_WIDTH_TIMER_BYPASS (1 << 7)
+
+#define PM_S2_COMMAND (PM_PLL_PWRDOWN | PM_USE_CPU_RDY | PM_PWR_DOWN)
+
+/* Method 0 bitmasks */
+#define PM_COLD_CONFIG (PM_PLL_PWRDOWN | PM_DEEP_STANDBY)
+#define PM_WARM_CONFIG (PM_COLD_CONFIG | PM_USE_CPU_RDY | PM_WARM_BOOT)
+
+/* Method 1 bitmask */
+#define M1_PM_WARM_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+ PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+ PM_WARM_BOOT | PM_DEEP_STANDBY | \
+ PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#define M1_PM_COLD_CONFIG (PM_DPHY_STANDBY_CLEAR | \
+ PM_MIN_S3_WIDTH_TIMER_BYPASS | \
+ PM_DEEP_STANDBY | \
+ PM_PLL_PWRDOWN | PM_PWR_DOWN)
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MIPS
+extern const unsigned long brcmstb_pm_do_s2_sz;
+extern asmlinkage int brcmstb_pm_do_s2(void __iomem *aon_ctrl_base,
+ void __iomem *ddr_phy_pll_status);
+#else
+/* s2 asm */
+extern asmlinkage int brcm_pm_do_s2(u32 *s2_params);
+
+/* s3 asm */
+extern asmlinkage int brcm_pm_do_s3(void __iomem *aon_ctrl_base,
+ int dcache_linesz);
+extern int s3_reentry;
+#endif /* CONFIG_MIPS */
+
+#endif
+
+#endif /* __BRCMSTB_PM_H__ */
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-arm.S b/drivers/soc/bcm/brcmstb/pm/s2-arm.S
new file mode 100644
index 000000000..5f0c4a8ae
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s2-arm.S
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright © 2014-2017 Broadcom
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+ .text
+ .align 3
+
+#define AON_CTRL_REG r10
+#define DDR_PHY_STATUS_REG r11
+
+/*
+ * r0: AON_CTRL base address
+ * r1: DDRY PHY PLL status register address
+ */
+ENTRY(brcmstb_pm_do_s2)
+ stmfd sp!, {r4-r11, lr}
+ mov AON_CTRL_REG, r0
+ mov DDR_PHY_STATUS_REG, r1
+
+ /* Flush memory transactions */
+ dsb
+
+ /* Cache DDR_PHY_STATUS_REG translation */
+ ldr r0, [DDR_PHY_STATUS_REG]
+
+ /* power down request */
+ ldr r0, =PM_S2_COMMAND
+ ldr r1, =0
+ str r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ ldr r1, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ str r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ ldr r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+ /* Wait for interrupt */
+ wfi
+ nop
+
+ /* Bring MEMC back up */
+1: ldr r0, [DDR_PHY_STATUS_REG]
+ ands r0, #1
+ beq 1b
+
+ /* Power-up handshake */
+ ldr r0, =1
+ str r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+ ldr r0, [AON_CTRL_REG, #AON_CTRL_HOST_MISC_CMDS]
+
+ ldr r0, =0
+ str r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+ ldr r0, [AON_CTRL_REG, #AON_CTRL_PM_CTRL]
+
+ /* Return to caller */
+ ldr r0, =0
+ ldmfd sp!, {r4-r11, pc}
+
+ ENDPROC(brcmstb_pm_do_s2)
+
+ /* Place literal pool here */
+ .ltorg
+
+ENTRY(brcmstb_pm_do_s2_sz)
+ .word . - brcmstb_pm_do_s2
diff --git a/drivers/soc/bcm/brcmstb/pm/s2-mips.S b/drivers/soc/bcm/brcmstb/pm/s2-mips.S
new file mode 100644
index 000000000..2a26a94eb
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s2-mips.S
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Broadcom Corporation
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+
+#include "pm.h"
+
+ .text
+ .set noreorder
+ .align 5
+
+/*
+ * a0: u32 params array
+ */
+LEAF(brcm_pm_do_s2)
+
+ subu sp, 64
+ sw ra, 0(sp)
+ sw s0, 4(sp)
+ sw s1, 8(sp)
+ sw s2, 12(sp)
+ sw s3, 16(sp)
+ sw s4, 20(sp)
+ sw s5, 24(sp)
+ sw s6, 28(sp)
+ sw s7, 32(sp)
+
+ /*
+ * Dereference the params array
+ * s0: AON_CTRL base register
+ * s1: DDR_PHY base register
+ * s2: TIMERS base register
+ * s3: I-Cache line size
+ * s4: Restart vector address
+ * s5: Restart vector size
+ */
+ move t0, a0
+
+ lw s0, 0(t0)
+ lw s1, 4(t0)
+ lw s2, 8(t0)
+ lw s3, 12(t0)
+ lw s4, 16(t0)
+ lw s5, 20(t0)
+
+ /* Lock this asm section into the I-cache */
+ addiu t1, s3, -1
+ not t1
+
+ la t0, brcm_pm_do_s2
+ and t0, t1
+
+ la t2, asm_end
+ and t2, t1
+
+1: cache 0x1c, 0(t0)
+ bne t0, t2, 1b
+ addu t0, s3
+
+ /* Lock the interrupt vector into the I-cache */
+ move t0, zero
+
+2: move t1, s4
+ cache 0x1c, 0(t1)
+ addu t1, s3
+ addu t0, s3
+ ble t0, s5, 2b
+ nop
+
+ sync
+
+ /* Power down request */
+ li t0, PM_S2_COMMAND
+ sw zero, AON_CTRL_PM_CTRL(s0)
+ lw zero, AON_CTRL_PM_CTRL(s0)
+ sw t0, AON_CTRL_PM_CTRL(s0)
+ lw t0, AON_CTRL_PM_CTRL(s0)
+
+ /* Enable CP0 interrupt 2 and wait for interrupt */
+ mfc0 t0, CP0_STATUS
+ /* Save cp0 sr for restoring later */
+ move s6, t0
+
+ li t1, ~(ST0_IM | ST0_IE)
+ and t0, t1
+ ori t0, STATUSF_IP2
+ mtc0 t0, CP0_STATUS
+ nop
+ nop
+ nop
+ ori t0, ST0_IE
+ mtc0 t0, CP0_STATUS
+
+ /* Wait for interrupt */
+ wait
+ nop
+
+ /* Wait for memc0 */
+1: lw t0, DDR40_PHY_CONTROL_REGS_0_PLL_STATUS(s1)
+ andi t0, 1
+ beqz t0, 1b
+ nop
+
+ /* 1ms delay needed for stable recovery */
+ /* Use TIMER1 to count 1 ms */
+ li t0, RESET_TIMER
+ sw t0, TIMER_TIMER1_CTRL(s2)
+ lw t0, TIMER_TIMER1_CTRL(s2)
+
+ li t0, START_TIMER
+ sw t0, TIMER_TIMER1_CTRL(s2)
+ lw t0, TIMER_TIMER1_CTRL(s2)
+
+ /* Prepare delay */
+ li t0, TIMER_MASK
+ lw t1, TIMER_TIMER1_STAT(s2)
+ and t1, t0
+ /* 1ms delay */
+ addi t1, 27000
+
+ /* Wait for the timer value to exceed t1 */
+1: lw t0, TIMER_TIMER1_STAT(s2)
+ sgtu t2, t1, t0
+ bnez t2, 1b
+ nop
+
+ /* Power back up */
+ li t1, 1
+ sw t1, AON_CTRL_HOST_MISC_CMDS(s0)
+ lw t1, AON_CTRL_HOST_MISC_CMDS(s0)
+
+ sw zero, AON_CTRL_PM_CTRL(s0)
+ lw zero, AON_CTRL_PM_CTRL(s0)
+
+ /* Unlock I-cache */
+ addiu t1, s3, -1
+ not t1
+
+ la t0, brcm_pm_do_s2
+ and t0, t1
+
+ la t2, asm_end
+ and t2, t1
+
+1: cache 0x00, 0(t0)
+ bne t0, t2, 1b
+ addu t0, s3
+
+ /* Unlock interrupt vector */
+ move t0, zero
+
+2: move t1, s4
+ cache 0x00, 0(t1)
+ addu t1, s3
+ addu t0, s3
+ ble t0, s5, 2b
+ nop
+
+ /* Restore cp0 sr */
+ sync
+ nop
+ mtc0 s6, CP0_STATUS
+ nop
+
+ /* Set return value to success */
+ li v0, 0
+
+ /* Return to caller */
+ lw s7, 32(sp)
+ lw s6, 28(sp)
+ lw s5, 24(sp)
+ lw s4, 20(sp)
+ lw s3, 16(sp)
+ lw s2, 12(sp)
+ lw s1, 8(sp)
+ lw s0, 4(sp)
+ lw ra, 0(sp)
+ addiu sp, 64
+
+ jr ra
+ nop
+END(brcm_pm_do_s2)
+
+ .globl asm_end
+asm_end:
+ nop
+
diff --git a/drivers/soc/bcm/brcmstb/pm/s3-mips.S b/drivers/soc/bcm/brcmstb/pm/s3-mips.S
new file mode 100644
index 000000000..ecfcfd34c
--- /dev/null
+++ b/drivers/soc/bcm/brcmstb/pm/s3-mips.S
@@ -0,0 +1,138 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2016 Broadcom Corporation
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/bmips.h>
+
+#include "pm.h"
+
+ .text
+ .set noreorder
+ .align 5
+ .global s3_reentry
+
+/*
+ * a0: AON_CTRL base register
+ * a1: D-Cache line size
+ */
+LEAF(brcm_pm_do_s3)
+
+ /* Get the address of s3_context */
+ la t0, gp_regs
+ sw ra, 0(t0)
+ sw s0, 4(t0)
+ sw s1, 8(t0)
+ sw s2, 12(t0)
+ sw s3, 16(t0)
+ sw s4, 20(t0)
+ sw s5, 24(t0)
+ sw s6, 28(t0)
+ sw s7, 32(t0)
+ sw gp, 36(t0)
+ sw sp, 40(t0)
+ sw fp, 44(t0)
+
+ /* Save CP0 Status */
+ mfc0 t1, CP0_STATUS
+ sw t1, 48(t0)
+
+ /* Write-back gp registers - cache will be gone */
+ addiu t1, a1, -1
+ not t1
+ and t0, t1
+
+ /* Flush at least 64 bytes */
+ addiu t2, t0, 64
+ and t2, t1
+
+1: cache 0x17, 0(t0)
+ bne t0, t2, 1b
+ addu t0, a1
+
+ /* Drop to deep standby */
+ li t1, PM_WARM_CONFIG
+ sw zero, AON_CTRL_PM_CTRL(a0)
+ lw zero, AON_CTRL_PM_CTRL(a0)
+ sw t1, AON_CTRL_PM_CTRL(a0)
+ lw t1, AON_CTRL_PM_CTRL(a0)
+
+ li t1, (PM_WARM_CONFIG | PM_PWR_DOWN)
+ sw t1, AON_CTRL_PM_CTRL(a0)
+ lw t1, AON_CTRL_PM_CTRL(a0)
+
+ /* Enable CP0 interrupt 2 and wait for interrupt */
+ mfc0 t0, CP0_STATUS
+
+ li t1, ~(ST0_IM | ST0_IE)
+ and t0, t1
+ ori t0, STATUSF_IP2
+ mtc0 t0, CP0_STATUS
+ nop
+ nop
+ nop
+ ori t0, ST0_IE
+ mtc0 t0, CP0_STATUS
+
+ /* Wait for interrupt */
+ wait
+ nop
+
+s3_reentry:
+
+ /* Clear call/return stack */
+ li t0, (0x06 << 16)
+ mtc0 t0, $22, 2
+ ssnop
+ ssnop
+ ssnop
+
+ /* Clear jump target buffer */
+ li t0, (0x04 << 16)
+ mtc0 t0, $22, 2
+ ssnop
+ ssnop
+ ssnop
+
+ sync
+ nop
+
+ /* Setup mmu defaults */
+ mtc0 zero, CP0_WIRED
+ mtc0 zero, CP0_ENTRYHI
+ li k0, PM_DEFAULT_MASK
+ mtc0 k0, CP0_PAGEMASK
+
+ li sp, BMIPS_WARM_RESTART_VEC
+ la k0, plat_wired_tlb_setup
+ jalr k0
+ nop
+
+ /* Restore general purpose registers */
+ la t0, gp_regs
+ lw fp, 44(t0)
+ lw sp, 40(t0)
+ lw gp, 36(t0)
+ lw s7, 32(t0)
+ lw s6, 28(t0)
+ lw s5, 24(t0)
+ lw s4, 20(t0)
+ lw s3, 16(t0)
+ lw s2, 12(t0)
+ lw s1, 8(t0)
+ lw s0, 4(t0)
+ lw ra, 0(t0)
+
+ /* Restore CP0 status */
+ lw t1, 48(t0)
+ mtc0 t1, CP0_STATUS
+
+ /* Return to caller */
+ li v0, 0
+ jr ra
+ nop
+
+END(brcm_pm_do_s3)
diff --git a/drivers/soc/bcm/raspberrypi-power.c b/drivers/soc/bcm/raspberrypi-power.c
new file mode 100644
index 000000000..068715d6e
--- /dev/null
+++ b/drivers/soc/bcm/raspberrypi-power.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/* (C) 2015 Pengutronix, Alexander Aring <aar@pengutronix.de>
+ *
+ * Authors:
+ * Alexander Aring <aar@pengutronix.de>
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <dt-bindings/power/raspberrypi-power.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+/*
+ * Firmware indices for the old power domains interface. Only a few
+ * of them were actually implemented.
+ */
+#define RPI_OLD_POWER_DOMAIN_USB 3
+#define RPI_OLD_POWER_DOMAIN_V3D 10
+
+struct rpi_power_domain {
+ u32 domain;
+ bool enabled;
+ bool old_interface;
+ struct generic_pm_domain base;
+ struct rpi_firmware *fw;
+};
+
+struct rpi_power_domains {
+ bool has_new_interface;
+ struct genpd_onecell_data xlate;
+ struct rpi_firmware *fw;
+ struct rpi_power_domain domains[RPI_POWER_DOMAIN_COUNT];
+};
+
+/*
+ * Packet definition used by RPI_FIRMWARE_SET_POWER_STATE and
+ * RPI_FIRMWARE_SET_DOMAIN_STATE
+ */
+struct rpi_power_domain_packet {
+ u32 domain;
+ u32 on;
+};
+
+/*
+ * Asks the firmware to enable or disable power on a specific power
+ * domain.
+ */
+static int rpi_firmware_set_power(struct rpi_power_domain *rpi_domain, bool on)
+{
+ struct rpi_power_domain_packet packet;
+
+ packet.domain = rpi_domain->domain;
+ packet.on = on;
+ return rpi_firmware_property(rpi_domain->fw,
+ rpi_domain->old_interface ?
+ RPI_FIRMWARE_SET_POWER_STATE :
+ RPI_FIRMWARE_SET_DOMAIN_STATE,
+ &packet, sizeof(packet));
+}
+
+static int rpi_domain_off(struct generic_pm_domain *domain)
+{
+ struct rpi_power_domain *rpi_domain =
+ container_of(domain, struct rpi_power_domain, base);
+
+ return rpi_firmware_set_power(rpi_domain, false);
+}
+
+static int rpi_domain_on(struct generic_pm_domain *domain)
+{
+ struct rpi_power_domain *rpi_domain =
+ container_of(domain, struct rpi_power_domain, base);
+
+ return rpi_firmware_set_power(rpi_domain, true);
+}
+
+static void rpi_common_init_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ dom->fw = rpi_domains->fw;
+
+ dom->base.name = name;
+ dom->base.power_on = rpi_domain_on;
+ dom->base.power_off = rpi_domain_off;
+
+ /*
+ * Treat all power domains as off at boot.
+ *
+ * The firmware itself may be keeping some domains on, but
+ * from Linux's perspective all we control is the refcounts
+ * that we give to the firmware, and we can't ask the firmware
+ * to turn off something that we haven't ourselves turned on.
+ */
+ pm_genpd_init(&dom->base, NULL, true);
+
+ rpi_domains->xlate.domains[xlate_index] = &dom->base;
+}
+
+static void rpi_init_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ if (!rpi_domains->has_new_interface)
+ return;
+
+ /* The DT binding index is the firmware's domain index minus one. */
+ dom->domain = xlate_index + 1;
+
+ rpi_common_init_power_domain(rpi_domains, xlate_index, name);
+}
+
+static void rpi_init_old_power_domain(struct rpi_power_domains *rpi_domains,
+ int xlate_index, int domain,
+ const char *name)
+{
+ struct rpi_power_domain *dom = &rpi_domains->domains[xlate_index];
+
+ dom->old_interface = true;
+ dom->domain = domain;
+
+ rpi_common_init_power_domain(rpi_domains, xlate_index, name);
+}
+
+/*
+ * Detects whether the firmware supports the new power domains interface.
+ *
+ * The firmware doesn't actually return an error on an unknown tag,
+ * and just skips over it, so we do the detection by putting an
+ * unexpected value in the return field and checking if it was
+ * unchanged.
+ */
+static bool
+rpi_has_new_domain_support(struct rpi_power_domains *rpi_domains)
+{
+ struct rpi_power_domain_packet packet;
+ int ret;
+
+ packet.domain = RPI_POWER_DOMAIN_ARM;
+ packet.on = ~0;
+
+ ret = rpi_firmware_property(rpi_domains->fw,
+ RPI_FIRMWARE_GET_DOMAIN_STATE,
+ &packet, sizeof(packet));
+
+ return ret == 0 && packet.on != ~0;
+}
+
+static int rpi_power_probe(struct platform_device *pdev)
+{
+ struct device_node *fw_np;
+ struct device *dev = &pdev->dev;
+ struct rpi_power_domains *rpi_domains;
+
+ rpi_domains = devm_kzalloc(dev, sizeof(*rpi_domains), GFP_KERNEL);
+ if (!rpi_domains)
+ return -ENOMEM;
+
+ rpi_domains->xlate.domains =
+ devm_kcalloc(dev,
+ RPI_POWER_DOMAIN_COUNT,
+ sizeof(*rpi_domains->xlate.domains),
+ GFP_KERNEL);
+ if (!rpi_domains->xlate.domains)
+ return -ENOMEM;
+
+ rpi_domains->xlate.num_domains = RPI_POWER_DOMAIN_COUNT;
+
+ fw_np = of_parse_phandle(pdev->dev.of_node, "firmware", 0);
+ if (!fw_np) {
+ dev_err(&pdev->dev, "no firmware node\n");
+ return -ENODEV;
+ }
+
+ rpi_domains->fw = devm_rpi_firmware_get(&pdev->dev, fw_np);
+ of_node_put(fw_np);
+ if (!rpi_domains->fw)
+ return -EPROBE_DEFER;
+
+ rpi_domains->has_new_interface =
+ rpi_has_new_domain_support(rpi_domains);
+
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C0, "I2C0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C1, "I2C1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_I2C2, "I2C2");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VIDEO_SCALER,
+ "VIDEO_SCALER");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VPU1, "VPU1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_HDMI, "HDMI");
+
+ /*
+ * Use the old firmware interface for USB power, so that we
+ * can turn it on even if the firmware hasn't been updated.
+ */
+ rpi_init_old_power_domain(rpi_domains, RPI_POWER_DOMAIN_USB,
+ RPI_OLD_POWER_DOMAIN_USB, "USB");
+
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_VEC, "VEC");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_JPEG, "JPEG");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_H264, "H264");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_V3D, "V3D");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ISP, "ISP");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM0, "UNICAM0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_UNICAM1, "UNICAM1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2RX, "CCP2RX");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CSI2, "CSI2");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CPI, "CPI");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI0, "DSI0");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_DSI1, "DSI1");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_TRANSPOSER,
+ "TRANSPOSER");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CCP2TX, "CCP2TX");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_CDP, "CDP");
+ rpi_init_power_domain(rpi_domains, RPI_POWER_DOMAIN_ARM, "ARM");
+
+ of_genpd_add_provider_onecell(dev->of_node, &rpi_domains->xlate);
+
+ platform_set_drvdata(pdev, rpi_domains);
+
+ return 0;
+}
+
+static const struct of_device_id rpi_power_of_match[] = {
+ { .compatible = "raspberrypi,bcm2835-power", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, rpi_power_of_match);
+
+static struct platform_driver rpi_power_driver = {
+ .driver = {
+ .name = "raspberrypi-power",
+ .of_match_table = rpi_power_of_match,
+ },
+ .probe = rpi_power_probe,
+};
+builtin_platform_driver(rpi_power_driver);
+
+MODULE_AUTHOR("Alexander Aring <aar@pengutronix.de>");
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi power domain driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 11:02:31 +0000