diff options
Diffstat (limited to 'drivers/spi/spi-omap-100k.c')
-rw-r--r-- | drivers/spi/spi-omap-100k.c | 490 |
1 files changed, 490 insertions, 0 deletions
diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c new file mode 100644 index 000000000..061f7394e --- /dev/null +++ b/drivers/spi/spi-omap-100k.c @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * OMAP7xx SPI 100k controller driver + * Author: Fabrice Crohas <fcrohas@gmail.com> + * from original omap1_mcspi driver + * + * Copyright (C) 2005, 2006 Nokia Corporation + * Author: Samuel Ortiz <samuel.ortiz@nokia.com> and + * Juha Yrjola <juha.yrjola@nokia.com> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <linux/spi/spi.h> + +#define OMAP1_SPI100K_MAX_FREQ 48000000 + +#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12) + +#define SPI_SETUP1 0x00 +#define SPI_SETUP2 0x02 +#define SPI_CTRL 0x04 +#define SPI_STATUS 0x06 +#define SPI_TX_LSB 0x08 +#define SPI_TX_MSB 0x0a +#define SPI_RX_LSB 0x0c +#define SPI_RX_MSB 0x0e + +#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5) +#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4) +#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1) +#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0) + +#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0) +#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0) +#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5) +#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5) +#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10) +#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10) + +#define SPI_CTRL_SEN(x) ((x) << 7) +#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2) +#define SPI_CTRL_WR (1UL << 1) +#define SPI_CTRL_RD (1UL << 0) + +#define SPI_STATUS_WE (1UL << 1) +#define SPI_STATUS_RD (1UL << 0) + +/* use PIO for small transfers, avoiding DMA setup/teardown overhead and + * cache operations; better heuristics consider wordsize and bitrate. + */ +#define DMA_MIN_BYTES 8 + +#define SPI_RUNNING 0 +#define SPI_SHUTDOWN 1 + +struct omap1_spi100k { + struct clk *ick; + struct clk *fck; + + /* Virtual base address of the controller */ + void __iomem *base; +}; + +struct omap1_spi100k_cs { + void __iomem *base; + int word_len; +}; + +static void spi100k_enable_clock(struct spi_master *master) +{ + unsigned int val; + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* enable SPI */ + val = readw(spi100k->base + SPI_SETUP1); + val |= SPI_SETUP1_CLOCK_ENABLE; + writew(val, spi100k->base + SPI_SETUP1); +} + +static void spi100k_disable_clock(struct spi_master *master) +{ + unsigned int val; + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* disable SPI */ + val = readw(spi100k->base + SPI_SETUP1); + val &= ~SPI_SETUP1_CLOCK_ENABLE; + writew(val, spi100k->base + SPI_SETUP1); +} + +static void spi100k_write_data(struct spi_master *master, int len, int data) +{ + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* write 16-bit word, shifting 8-bit data if necessary */ + if (len <= 8) { + data <<= 8; + len = 16; + } + + spi100k_enable_clock(master); + writew(data, spi100k->base + SPI_TX_MSB); + + writew(SPI_CTRL_SEN(0) | + SPI_CTRL_WORD_SIZE(len) | + SPI_CTRL_WR, + spi100k->base + SPI_CTRL); + + /* Wait for bit ack send change */ + while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE) + ; + udelay(1000); + + spi100k_disable_clock(master); +} + +static int spi100k_read_data(struct spi_master *master, int len) +{ + int dataL; + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + /* Always do at least 16 bits */ + if (len <= 8) + len = 16; + + spi100k_enable_clock(master); + writew(SPI_CTRL_SEN(0) | + SPI_CTRL_WORD_SIZE(len) | + SPI_CTRL_RD, + spi100k->base + SPI_CTRL); + + while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD) + ; + udelay(1000); + + dataL = readw(spi100k->base + SPI_RX_LSB); + readw(spi100k->base + SPI_RX_MSB); + spi100k_disable_clock(master); + + return dataL; +} + +static void spi100k_open(struct spi_master *master) +{ + /* get control of SPI */ + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + writew(SPI_SETUP1_INT_READ_ENABLE | + SPI_SETUP1_INT_WRITE_ENABLE | + SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1); + + /* configure clock and interrupts */ + writew(SPI_SETUP2_ACTIVE_EDGE_FALLING | + SPI_SETUP2_NEGATIVE_LEVEL | + SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2); +} + +static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable) +{ + if (enable) + writew(0x05fc, spi100k->base + SPI_CTRL); + else + writew(0x05fd, spi100k->base + SPI_CTRL); +} + +static unsigned +omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) +{ + struct omap1_spi100k_cs *cs = spi->controller_state; + unsigned int count, c; + int word_len; + + count = xfer->len; + c = count; + word_len = cs->word_len; + + if (word_len <= 8) { + u8 *rx; + const u8 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c -= 1; + if (xfer->tx_buf != NULL) + spi100k_write_data(spi->master, word_len, *tx++); + if (xfer->rx_buf != NULL) + *rx++ = spi100k_read_data(spi->master, word_len); + } while (c); + } else if (word_len <= 16) { + u16 *rx; + const u16 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c -= 2; + if (xfer->tx_buf != NULL) + spi100k_write_data(spi->master, word_len, *tx++); + if (xfer->rx_buf != NULL) + *rx++ = spi100k_read_data(spi->master, word_len); + } while (c); + } else if (word_len <= 32) { + u32 *rx; + const u32 *tx; + + rx = xfer->rx_buf; + tx = xfer->tx_buf; + do { + c -= 4; + if (xfer->tx_buf != NULL) + spi100k_write_data(spi->master, word_len, *tx); + if (xfer->rx_buf != NULL) + *rx = spi100k_read_data(spi->master, word_len); + } while (c); + } + return count - c; +} + +/* called only when no transfer is active to this device */ +static int omap1_spi100k_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master); + struct omap1_spi100k_cs *cs = spi->controller_state; + u8 word_len; + + if (t != NULL) + word_len = t->bits_per_word; + else + word_len = spi->bits_per_word; + + if (word_len > 32) + return -EINVAL; + cs->word_len = word_len; + + /* SPI init before transfer */ + writew(0x3e, spi100k->base + SPI_SETUP1); + writew(0x00, spi100k->base + SPI_STATUS); + writew(0x3e, spi100k->base + SPI_CTRL); + + return 0; +} + +/* the spi->mode bits understood by this driver: */ +#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH) + +static int omap1_spi100k_setup(struct spi_device *spi) +{ + int ret; + struct omap1_spi100k *spi100k; + struct omap1_spi100k_cs *cs = spi->controller_state; + + spi100k = spi_master_get_devdata(spi->master); + + if (!cs) { + cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL); + if (!cs) + return -ENOMEM; + cs->base = spi100k->base + spi->chip_select * 0x14; + spi->controller_state = cs; + } + + spi100k_open(spi->master); + + clk_prepare_enable(spi100k->ick); + clk_prepare_enable(spi100k->fck); + + ret = omap1_spi100k_setup_transfer(spi, NULL); + + clk_disable_unprepare(spi100k->ick); + clk_disable_unprepare(spi100k->fck); + + return ret; +} + +static int omap1_spi100k_transfer_one_message(struct spi_master *master, + struct spi_message *m) +{ + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + struct spi_device *spi = m->spi; + struct spi_transfer *t = NULL; + int cs_active = 0; + int status = 0; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { + break; + } + status = omap1_spi100k_setup_transfer(spi, t); + if (status < 0) + break; + + if (!cs_active) { + omap1_spi100k_force_cs(spi100k, 1); + cs_active = 1; + } + + if (t->len) { + unsigned count; + + count = omap1_spi100k_txrx_pio(spi, t); + m->actual_length += count; + + if (count != t->len) { + break; + } + } + + spi_transfer_delay_exec(t); + + /* ignore the "leave it on after last xfer" hint */ + + if (t->cs_change) { + omap1_spi100k_force_cs(spi100k, 0); + cs_active = 0; + } + } + + status = omap1_spi100k_setup_transfer(spi, NULL); + + if (cs_active) + omap1_spi100k_force_cs(spi100k, 0); + + m->status = status; + + spi_finalize_current_message(master); + + return status; +} + +static int omap1_spi100k_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct omap1_spi100k *spi100k; + int status = 0; + + if (!pdev->id) + return -EINVAL; + + master = spi_alloc_master(&pdev->dev, sizeof(*spi100k)); + if (master == NULL) { + dev_dbg(&pdev->dev, "master allocation failed\n"); + return -ENOMEM; + } + + if (pdev->id != -1) + master->bus_num = pdev->id; + + master->setup = omap1_spi100k_setup; + master->transfer_one_message = omap1_spi100k_transfer_one_message; + master->num_chipselect = 2; + master->mode_bits = MODEBITS; + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32); + master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16); + master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ; + master->auto_runtime_pm = true; + + spi100k = spi_master_get_devdata(master); + + /* + * The memory region base address is taken as the platform_data. + * You should allocate this with ioremap() before initializing + * the SPI. + */ + spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev); + + spi100k->ick = devm_clk_get(&pdev->dev, "ick"); + if (IS_ERR(spi100k->ick)) { + dev_dbg(&pdev->dev, "can't get spi100k_ick\n"); + status = PTR_ERR(spi100k->ick); + goto err; + } + + spi100k->fck = devm_clk_get(&pdev->dev, "fck"); + if (IS_ERR(spi100k->fck)) { + dev_dbg(&pdev->dev, "can't get spi100k_fck\n"); + status = PTR_ERR(spi100k->fck); + goto err; + } + + status = clk_prepare_enable(spi100k->ick); + if (status != 0) { + dev_err(&pdev->dev, "failed to enable ick: %d\n", status); + goto err; + } + + status = clk_prepare_enable(spi100k->fck); + if (status != 0) { + dev_err(&pdev->dev, "failed to enable fck: %d\n", status); + goto err_ick; + } + + pm_runtime_enable(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + + status = devm_spi_register_master(&pdev->dev, master); + if (status < 0) + goto err_fck; + + return status; + +err_fck: + pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(spi100k->fck); +err_ick: + clk_disable_unprepare(spi100k->ick); +err: + spi_master_put(master); + return status; +} + +static int omap1_spi100k_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + pm_runtime_disable(&pdev->dev); + + clk_disable_unprepare(spi100k->fck); + clk_disable_unprepare(spi100k->ick); + + return 0; +} + +#ifdef CONFIG_PM +static int omap1_spi100k_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + + clk_disable_unprepare(spi100k->ick); + clk_disable_unprepare(spi100k->fck); + + return 0; +} + +static int omap1_spi100k_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct omap1_spi100k *spi100k = spi_master_get_devdata(master); + int ret; + + ret = clk_prepare_enable(spi100k->ick); + if (ret != 0) { + dev_err(dev, "Failed to enable ick: %d\n", ret); + return ret; + } + + ret = clk_prepare_enable(spi100k->fck); + if (ret != 0) { + dev_err(dev, "Failed to enable fck: %d\n", ret); + clk_disable_unprepare(spi100k->ick); + return ret; + } + + return 0; +} +#endif + +static const struct dev_pm_ops omap1_spi100k_pm = { + SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend, + omap1_spi100k_runtime_resume, NULL) +}; + +static struct platform_driver omap1_spi100k_driver = { + .driver = { + .name = "omap1_spi100k", + .pm = &omap1_spi100k_pm, + }, + .probe = omap1_spi100k_probe, + .remove = omap1_spi100k_remove, +}; + +module_platform_driver(omap1_spi100k_driver); + +MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver"); +MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>"); +MODULE_LICENSE("GPL"); |