summaryrefslogtreecommitdiffstats
path: root/drivers/thunderbolt/dma_port.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thunderbolt/dma_port.c')
-rw-r--r--drivers/thunderbolt/dma_port.c458
1 files changed, 458 insertions, 0 deletions
diff --git a/drivers/thunderbolt/dma_port.c b/drivers/thunderbolt/dma_port.c
new file mode 100644
index 000000000..9f20c7bbf
--- /dev/null
+++ b/drivers/thunderbolt/dma_port.c
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Thunderbolt DMA configuration based mailbox support
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Authors: Michael Jamet <michael.jamet@intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "dma_port.h"
+#include "tb_regs.h"
+
+#define DMA_PORT_CAP 0x3e
+
+#define MAIL_DATA 1
+#define MAIL_DATA_DWORDS 16
+
+#define MAIL_IN 17
+#define MAIL_IN_CMD_SHIFT 28
+#define MAIL_IN_CMD_MASK GENMASK(31, 28)
+#define MAIL_IN_CMD_FLASH_WRITE 0x0
+#define MAIL_IN_CMD_FLASH_UPDATE_AUTH 0x1
+#define MAIL_IN_CMD_FLASH_READ 0x2
+#define MAIL_IN_CMD_POWER_CYCLE 0x4
+#define MAIL_IN_DWORDS_SHIFT 24
+#define MAIL_IN_DWORDS_MASK GENMASK(27, 24)
+#define MAIL_IN_ADDRESS_SHIFT 2
+#define MAIL_IN_ADDRESS_MASK GENMASK(23, 2)
+#define MAIL_IN_CSS BIT(1)
+#define MAIL_IN_OP_REQUEST BIT(0)
+
+#define MAIL_OUT 18
+#define MAIL_OUT_STATUS_RESPONSE BIT(29)
+#define MAIL_OUT_STATUS_CMD_SHIFT 4
+#define MAIL_OUT_STATUS_CMD_MASK GENMASK(7, 4)
+#define MAIL_OUT_STATUS_MASK GENMASK(3, 0)
+#define MAIL_OUT_STATUS_COMPLETED 0
+#define MAIL_OUT_STATUS_ERR_AUTH 1
+#define MAIL_OUT_STATUS_ERR_ACCESS 2
+
+#define DMA_PORT_TIMEOUT 5000 /* ms */
+#define DMA_PORT_RETRIES 3
+
+/**
+ * struct tb_dma_port - DMA control port
+ * @sw: Switch the DMA port belongs to
+ * @port: Switch port number where DMA capability is found
+ * @base: Start offset of the mailbox registers
+ * @buf: Temporary buffer to store a single block
+ */
+struct tb_dma_port {
+ struct tb_switch *sw;
+ u8 port;
+ u32 base;
+ u8 *buf;
+};
+
+/*
+ * When the switch is in safe mode it supports very little functionality
+ * so we don't validate that much here.
+ */
+static bool dma_port_match(const struct tb_cfg_request *req,
+ const struct ctl_pkg *pkg)
+{
+ u64 route = tb_cfg_get_route(pkg->buffer) & ~BIT_ULL(63);
+
+ if (pkg->frame.eof == TB_CFG_PKG_ERROR)
+ return true;
+ if (pkg->frame.eof != req->response_type)
+ return false;
+ if (route != tb_cfg_get_route(req->request))
+ return false;
+ if (pkg->frame.size != req->response_size)
+ return false;
+
+ return true;
+}
+
+static bool dma_port_copy(struct tb_cfg_request *req, const struct ctl_pkg *pkg)
+{
+ memcpy(req->response, pkg->buffer, req->response_size);
+ return true;
+}
+
+static int dma_port_read(struct tb_ctl *ctl, void *buffer, u64 route,
+ u32 port, u32 offset, u32 length, int timeout_msec)
+{
+ struct cfg_read_pkg request = {
+ .header = tb_cfg_make_header(route),
+ .addr = {
+ .seq = 1,
+ .port = port,
+ .space = TB_CFG_PORT,
+ .offset = offset,
+ .length = length,
+ },
+ };
+ struct tb_cfg_request *req;
+ struct cfg_write_pkg reply;
+ struct tb_cfg_result res;
+
+ req = tb_cfg_request_alloc();
+ if (!req)
+ return -ENOMEM;
+
+ req->match = dma_port_match;
+ req->copy = dma_port_copy;
+ req->request = &request;
+ req->request_size = sizeof(request);
+ req->request_type = TB_CFG_PKG_READ;
+ req->response = &reply;
+ req->response_size = 12 + 4 * length;
+ req->response_type = TB_CFG_PKG_READ;
+
+ res = tb_cfg_request_sync(ctl, req, timeout_msec);
+
+ tb_cfg_request_put(req);
+
+ if (res.err)
+ return res.err;
+
+ memcpy(buffer, &reply.data, 4 * length);
+ return 0;
+}
+
+static int dma_port_write(struct tb_ctl *ctl, const void *buffer, u64 route,
+ u32 port, u32 offset, u32 length, int timeout_msec)
+{
+ struct cfg_write_pkg request = {
+ .header = tb_cfg_make_header(route),
+ .addr = {
+ .seq = 1,
+ .port = port,
+ .space = TB_CFG_PORT,
+ .offset = offset,
+ .length = length,
+ },
+ };
+ struct tb_cfg_request *req;
+ struct cfg_read_pkg reply;
+ struct tb_cfg_result res;
+
+ memcpy(&request.data, buffer, length * 4);
+
+ req = tb_cfg_request_alloc();
+ if (!req)
+ return -ENOMEM;
+
+ req->match = dma_port_match;
+ req->copy = dma_port_copy;
+ req->request = &request;
+ req->request_size = 12 + 4 * length;
+ req->request_type = TB_CFG_PKG_WRITE;
+ req->response = &reply;
+ req->response_size = sizeof(reply);
+ req->response_type = TB_CFG_PKG_WRITE;
+
+ res = tb_cfg_request_sync(ctl, req, timeout_msec);
+
+ tb_cfg_request_put(req);
+
+ return res.err;
+}
+
+static int dma_find_port(struct tb_switch *sw)
+{
+ static const int ports[] = { 3, 5, 7 };
+ int i;
+
+ /*
+ * The DMA (NHI) port is either 3, 5 or 7 depending on the
+ * controller. Try all of them.
+ */
+ for (i = 0; i < ARRAY_SIZE(ports); i++) {
+ u32 type;
+ int ret;
+
+ ret = dma_port_read(sw->tb->ctl, &type, tb_route(sw), ports[i],
+ 2, 1, DMA_PORT_TIMEOUT);
+ if (!ret && (type & 0xffffff) == TB_TYPE_NHI)
+ return ports[i];
+ }
+
+ return -ENODEV;
+}
+
+/**
+ * dma_port_alloc() - Finds DMA control port from a switch pointed by route
+ * @sw: Switch from where find the DMA port
+ *
+ * Function checks if the switch NHI port supports DMA configuration
+ * based mailbox capability and if it does, allocates and initializes
+ * DMA port structure. Returns %NULL if the capabity was not found.
+ *
+ * The DMA control port is functional also when the switch is in safe
+ * mode.
+ */
+struct tb_dma_port *dma_port_alloc(struct tb_switch *sw)
+{
+ struct tb_dma_port *dma;
+ int port;
+
+ port = dma_find_port(sw);
+ if (port < 0)
+ return NULL;
+
+ dma = kzalloc(sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return NULL;
+
+ dma->buf = kmalloc_array(MAIL_DATA_DWORDS, sizeof(u32), GFP_KERNEL);
+ if (!dma->buf) {
+ kfree(dma);
+ return NULL;
+ }
+
+ dma->sw = sw;
+ dma->port = port;
+ dma->base = DMA_PORT_CAP;
+
+ return dma;
+}
+
+/**
+ * dma_port_free() - Release DMA control port structure
+ * @dma: DMA control port
+ */
+void dma_port_free(struct tb_dma_port *dma)
+{
+ if (dma) {
+ kfree(dma->buf);
+ kfree(dma);
+ }
+}
+
+static int dma_port_wait_for_completion(struct tb_dma_port *dma,
+ unsigned int timeout)
+{
+ unsigned long end = jiffies + msecs_to_jiffies(timeout);
+ struct tb_switch *sw = dma->sw;
+
+ do {
+ int ret;
+ u32 in;
+
+ ret = dma_port_read(sw->tb->ctl, &in, tb_route(sw), dma->port,
+ dma->base + MAIL_IN, 1, 50);
+ if (ret) {
+ if (ret != -ETIMEDOUT)
+ return ret;
+ } else if (!(in & MAIL_IN_OP_REQUEST)) {
+ return 0;
+ }
+
+ usleep_range(50, 100);
+ } while (time_before(jiffies, end));
+
+ return -ETIMEDOUT;
+}
+
+static int status_to_errno(u32 status)
+{
+ switch (status & MAIL_OUT_STATUS_MASK) {
+ case MAIL_OUT_STATUS_COMPLETED:
+ return 0;
+ case MAIL_OUT_STATUS_ERR_AUTH:
+ return -EINVAL;
+ case MAIL_OUT_STATUS_ERR_ACCESS:
+ return -EACCES;
+ }
+
+ return -EIO;
+}
+
+static int dma_port_request(struct tb_dma_port *dma, u32 in,
+ unsigned int timeout)
+{
+ struct tb_switch *sw = dma->sw;
+ u32 out;
+ int ret;
+
+ ret = dma_port_write(sw->tb->ctl, &in, tb_route(sw), dma->port,
+ dma->base + MAIL_IN, 1, DMA_PORT_TIMEOUT);
+ if (ret)
+ return ret;
+
+ ret = dma_port_wait_for_completion(dma, timeout);
+ if (ret)
+ return ret;
+
+ ret = dma_port_read(sw->tb->ctl, &out, tb_route(sw), dma->port,
+ dma->base + MAIL_OUT, 1, DMA_PORT_TIMEOUT);
+ if (ret)
+ return ret;
+
+ return status_to_errno(out);
+}
+
+static int dma_port_flash_read_block(void *data, unsigned int dwaddress,
+ void *buf, size_t dwords)
+{
+ struct tb_dma_port *dma = data;
+ struct tb_switch *sw = dma->sw;
+ int ret;
+ u32 in;
+
+ in = MAIL_IN_CMD_FLASH_READ << MAIL_IN_CMD_SHIFT;
+ if (dwords < MAIL_DATA_DWORDS)
+ in |= (dwords << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK;
+ in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK;
+ in |= MAIL_IN_OP_REQUEST;
+
+ ret = dma_port_request(dma, in, DMA_PORT_TIMEOUT);
+ if (ret)
+ return ret;
+
+ return dma_port_read(sw->tb->ctl, buf, tb_route(sw), dma->port,
+ dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT);
+}
+
+static int dma_port_flash_write_block(void *data, unsigned int dwaddress,
+ const void *buf, size_t dwords)
+{
+ struct tb_dma_port *dma = data;
+ struct tb_switch *sw = dma->sw;
+ int ret;
+ u32 in;
+
+ /* Write the block to MAIL_DATA registers */
+ ret = dma_port_write(sw->tb->ctl, buf, tb_route(sw), dma->port,
+ dma->base + MAIL_DATA, dwords, DMA_PORT_TIMEOUT);
+ if (ret)
+ return ret;
+
+ in = MAIL_IN_CMD_FLASH_WRITE << MAIL_IN_CMD_SHIFT;
+
+ /* CSS header write is always done to the same magic address */
+ if (dwaddress >= DMA_PORT_CSS_ADDRESS)
+ in |= MAIL_IN_CSS;
+
+ in |= ((dwords - 1) << MAIL_IN_DWORDS_SHIFT) & MAIL_IN_DWORDS_MASK;
+ in |= (dwaddress << MAIL_IN_ADDRESS_SHIFT) & MAIL_IN_ADDRESS_MASK;
+ in |= MAIL_IN_OP_REQUEST;
+
+ return dma_port_request(dma, in, DMA_PORT_TIMEOUT);
+}
+
+/**
+ * dma_port_flash_read() - Read from active flash region
+ * @dma: DMA control port
+ * @address: Address relative to the start of active region
+ * @buf: Buffer where the data is read
+ * @size: Size of the buffer
+ */
+int dma_port_flash_read(struct tb_dma_port *dma, unsigned int address,
+ void *buf, size_t size)
+{
+ return tb_nvm_read_data(address, buf, size, DMA_PORT_RETRIES,
+ dma_port_flash_read_block, dma);
+}
+
+/**
+ * dma_port_flash_write() - Write to non-active flash region
+ * @dma: DMA control port
+ * @address: Address relative to the start of non-active region
+ * @buf: Data to write
+ * @size: Size of the buffer
+ *
+ * Writes block of data to the non-active flash region of the switch. If
+ * the address is given as %DMA_PORT_CSS_ADDRESS the block is written
+ * using CSS command.
+ */
+int dma_port_flash_write(struct tb_dma_port *dma, unsigned int address,
+ const void *buf, size_t size)
+{
+ if (address >= DMA_PORT_CSS_ADDRESS && size > DMA_PORT_CSS_MAX_SIZE)
+ return -E2BIG;
+
+ return tb_nvm_write_data(address, buf, size, DMA_PORT_RETRIES,
+ dma_port_flash_write_block, dma);
+}
+
+/**
+ * dma_port_flash_update_auth() - Starts flash authenticate cycle
+ * @dma: DMA control port
+ *
+ * Starts the flash update authentication cycle. If the image in the
+ * non-active area was valid, the switch starts upgrade process where
+ * active and non-active area get swapped in the end. Caller should call
+ * dma_port_flash_update_auth_status() to get status of this command.
+ * This is because if the switch in question is root switch the
+ * thunderbolt host controller gets reset as well.
+ */
+int dma_port_flash_update_auth(struct tb_dma_port *dma)
+{
+ u32 in;
+
+ in = MAIL_IN_CMD_FLASH_UPDATE_AUTH << MAIL_IN_CMD_SHIFT;
+ in |= MAIL_IN_OP_REQUEST;
+
+ return dma_port_request(dma, in, 150);
+}
+
+/**
+ * dma_port_flash_update_auth_status() - Reads status of update auth command
+ * @dma: DMA control port
+ * @status: Status code of the operation
+ *
+ * The function checks if there is status available from the last update
+ * auth command. Returns %0 if there is no status and no further
+ * action is required. If there is status, %1 is returned instead and
+ * @status holds the failure code.
+ *
+ * Negative return means there was an error reading status from the
+ * switch.
+ */
+int dma_port_flash_update_auth_status(struct tb_dma_port *dma, u32 *status)
+{
+ struct tb_switch *sw = dma->sw;
+ u32 out, cmd;
+ int ret;
+
+ ret = dma_port_read(sw->tb->ctl, &out, tb_route(sw), dma->port,
+ dma->base + MAIL_OUT, 1, DMA_PORT_TIMEOUT);
+ if (ret)
+ return ret;
+
+ /* Check if the status relates to flash update auth */
+ cmd = (out & MAIL_OUT_STATUS_CMD_MASK) >> MAIL_OUT_STATUS_CMD_SHIFT;
+ if (cmd == MAIL_IN_CMD_FLASH_UPDATE_AUTH) {
+ if (status)
+ *status = out & MAIL_OUT_STATUS_MASK;
+
+ /* Reset is needed in any case */
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * dma_port_power_cycle() - Power cycles the switch
+ * @dma: DMA control port
+ *
+ * Triggers power cycle to the switch.
+ */
+int dma_port_power_cycle(struct tb_dma_port *dma)
+{
+ u32 in;
+
+ in = MAIL_IN_CMD_POWER_CYCLE << MAIL_IN_CMD_SHIFT;
+ in |= MAIL_IN_OP_REQUEST;
+
+ return dma_port_request(dma, in, 150);
+}