summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3/core.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3/core.h')
-rw-r--r--drivers/usb/dwc3/core.h1660
1 files changed, 1660 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
new file mode 100644
index 000000000..889c122da
--- /dev/null
+++ b/drivers/usb/dwc3/core.h
@@ -0,0 +1,1660 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * core.h - DesignWare USB3 DRD Core Header
+ *
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com
+ *
+ * Authors: Felipe Balbi <balbi@ti.com>,
+ * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ */
+
+#ifndef __DRIVERS_USB_DWC3_CORE_H
+#define __DRIVERS_USB_DWC3_CORE_H
+
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/role.h>
+#include <linux/ulpi/interface.h>
+
+#include <linux/phy/phy.h>
+
+#include <linux/power_supply.h>
+
+#define DWC3_MSG_MAX 500
+
+/* Global constants */
+#define DWC3_PULL_UP_TIMEOUT 500 /* ms */
+#define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */
+#define DWC3_EP0_SETUP_SIZE 512
+#define DWC3_ENDPOINTS_NUM 32
+#define DWC3_XHCI_RESOURCES_NUM 2
+#define DWC3_ISOC_MAX_RETRIES 5
+
+#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
+#define DWC3_EVENT_BUFFERS_SIZE 4096
+#define DWC3_EVENT_TYPE_MASK 0xfe
+
+#define DWC3_EVENT_TYPE_DEV 0
+#define DWC3_EVENT_TYPE_CARKIT 3
+#define DWC3_EVENT_TYPE_I2C 4
+
+#define DWC3_DEVICE_EVENT_DISCONNECT 0
+#define DWC3_DEVICE_EVENT_RESET 1
+#define DWC3_DEVICE_EVENT_CONNECT_DONE 2
+#define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3
+#define DWC3_DEVICE_EVENT_WAKEUP 4
+#define DWC3_DEVICE_EVENT_HIBER_REQ 5
+#define DWC3_DEVICE_EVENT_SUSPEND 6
+#define DWC3_DEVICE_EVENT_SOF 7
+#define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9
+#define DWC3_DEVICE_EVENT_CMD_CMPL 10
+#define DWC3_DEVICE_EVENT_OVERFLOW 11
+
+/* Controller's role while using the OTG block */
+#define DWC3_OTG_ROLE_IDLE 0
+#define DWC3_OTG_ROLE_HOST 1
+#define DWC3_OTG_ROLE_DEVICE 2
+
+#define DWC3_GEVNTCOUNT_MASK 0xfffc
+#define DWC3_GEVNTCOUNT_EHB BIT(31)
+#define DWC3_GSNPSID_MASK 0xffff0000
+#define DWC3_GSNPSREV_MASK 0xffff
+#define DWC3_GSNPS_ID(p) (((p) & DWC3_GSNPSID_MASK) >> 16)
+
+/* DWC3 registers memory space boundries */
+#define DWC3_XHCI_REGS_START 0x0
+#define DWC3_XHCI_REGS_END 0x7fff
+#define DWC3_GLOBALS_REGS_START 0xc100
+#define DWC3_GLOBALS_REGS_END 0xc6ff
+#define DWC3_DEVICE_REGS_START 0xc700
+#define DWC3_DEVICE_REGS_END 0xcbff
+#define DWC3_OTG_REGS_START 0xcc00
+#define DWC3_OTG_REGS_END 0xccff
+
+/* Global Registers */
+#define DWC3_GSBUSCFG0 0xc100
+#define DWC3_GSBUSCFG1 0xc104
+#define DWC3_GTXTHRCFG 0xc108
+#define DWC3_GRXTHRCFG 0xc10c
+#define DWC3_GCTL 0xc110
+#define DWC3_GEVTEN 0xc114
+#define DWC3_GSTS 0xc118
+#define DWC3_GUCTL1 0xc11c
+#define DWC3_GSNPSID 0xc120
+#define DWC3_GGPIO 0xc124
+#define DWC3_GUID 0xc128
+#define DWC3_GUCTL 0xc12c
+#define DWC3_GBUSERRADDR0 0xc130
+#define DWC3_GBUSERRADDR1 0xc134
+#define DWC3_GPRTBIMAP0 0xc138
+#define DWC3_GPRTBIMAP1 0xc13c
+#define DWC3_GHWPARAMS0 0xc140
+#define DWC3_GHWPARAMS1 0xc144
+#define DWC3_GHWPARAMS2 0xc148
+#define DWC3_GHWPARAMS3 0xc14c
+#define DWC3_GHWPARAMS4 0xc150
+#define DWC3_GHWPARAMS5 0xc154
+#define DWC3_GHWPARAMS6 0xc158
+#define DWC3_GHWPARAMS7 0xc15c
+#define DWC3_GDBGFIFOSPACE 0xc160
+#define DWC3_GDBGLTSSM 0xc164
+#define DWC3_GDBGBMU 0xc16c
+#define DWC3_GDBGLSPMUX 0xc170
+#define DWC3_GDBGLSP 0xc174
+#define DWC3_GDBGEPINFO0 0xc178
+#define DWC3_GDBGEPINFO1 0xc17c
+#define DWC3_GPRTBIMAP_HS0 0xc180
+#define DWC3_GPRTBIMAP_HS1 0xc184
+#define DWC3_GPRTBIMAP_FS0 0xc188
+#define DWC3_GPRTBIMAP_FS1 0xc18c
+#define DWC3_GUCTL2 0xc19c
+
+#define DWC3_VER_NUMBER 0xc1a0
+#define DWC3_VER_TYPE 0xc1a4
+
+#define DWC3_GUSB2PHYCFG(n) (0xc200 + ((n) * 0x04))
+#define DWC3_GUSB2I2CCTL(n) (0xc240 + ((n) * 0x04))
+
+#define DWC3_GUSB2PHYACC(n) (0xc280 + ((n) * 0x04))
+
+#define DWC3_GUSB3PIPECTL(n) (0xc2c0 + ((n) * 0x04))
+
+#define DWC3_GTXFIFOSIZ(n) (0xc300 + ((n) * 0x04))
+#define DWC3_GRXFIFOSIZ(n) (0xc380 + ((n) * 0x04))
+
+#define DWC3_GEVNTADRLO(n) (0xc400 + ((n) * 0x10))
+#define DWC3_GEVNTADRHI(n) (0xc404 + ((n) * 0x10))
+#define DWC3_GEVNTSIZ(n) (0xc408 + ((n) * 0x10))
+#define DWC3_GEVNTCOUNT(n) (0xc40c + ((n) * 0x10))
+
+#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GUCTL3 0xc60c
+#define DWC3_GFLADJ 0xc630
+#define DWC3_GHWPARAMS9 0xc6e0
+
+/* Device Registers */
+#define DWC3_DCFG 0xc700
+#define DWC3_DCTL 0xc704
+#define DWC3_DEVTEN 0xc708
+#define DWC3_DSTS 0xc70c
+#define DWC3_DGCMDPAR 0xc710
+#define DWC3_DGCMD 0xc714
+#define DWC3_DALEPENA 0xc720
+#define DWC3_DCFG1 0xc740 /* DWC_usb32 only */
+
+#define DWC3_DEP_BASE(n) (0xc800 + ((n) * 0x10))
+#define DWC3_DEPCMDPAR2 0x00
+#define DWC3_DEPCMDPAR1 0x04
+#define DWC3_DEPCMDPAR0 0x08
+#define DWC3_DEPCMD 0x0c
+
+#define DWC3_DEV_IMOD(n) (0xca00 + ((n) * 0x4))
+
+/* OTG Registers */
+#define DWC3_OCFG 0xcc00
+#define DWC3_OCTL 0xcc04
+#define DWC3_OEVT 0xcc08
+#define DWC3_OEVTEN 0xcc0C
+#define DWC3_OSTS 0xcc10
+
+/* Bit fields */
+
+/* Global SoC Bus Configuration INCRx Register 0 */
+#define DWC3_GSBUSCFG0_INCR256BRSTENA (1 << 7) /* INCR256 burst */
+#define DWC3_GSBUSCFG0_INCR128BRSTENA (1 << 6) /* INCR128 burst */
+#define DWC3_GSBUSCFG0_INCR64BRSTENA (1 << 5) /* INCR64 burst */
+#define DWC3_GSBUSCFG0_INCR32BRSTENA (1 << 4) /* INCR32 burst */
+#define DWC3_GSBUSCFG0_INCR16BRSTENA (1 << 3) /* INCR16 burst */
+#define DWC3_GSBUSCFG0_INCR8BRSTENA (1 << 2) /* INCR8 burst */
+#define DWC3_GSBUSCFG0_INCR4BRSTENA (1 << 1) /* INCR4 burst */
+#define DWC3_GSBUSCFG0_INCRBRSTENA (1 << 0) /* undefined length enable */
+#define DWC3_GSBUSCFG0_INCRBRST_MASK 0xff
+
+/* Global Debug LSP MUX Select */
+#define DWC3_GDBGLSPMUX_ENDBC BIT(15) /* Host only */
+#define DWC3_GDBGLSPMUX_HOSTSELECT(n) ((n) & 0x3fff)
+#define DWC3_GDBGLSPMUX_DEVSELECT(n) (((n) & 0xf) << 4)
+#define DWC3_GDBGLSPMUX_EPSELECT(n) ((n) & 0xf)
+
+/* Global Debug Queue/FIFO Space Available Register */
+#define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f)
+#define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0)
+#define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
+
+#define DWC3_TXFIFO 0
+#define DWC3_RXFIFO 1
+#define DWC3_TXREQQ 2
+#define DWC3_RXREQQ 3
+#define DWC3_RXINFOQ 4
+#define DWC3_PSTATQ 5
+#define DWC3_DESCFETCHQ 6
+#define DWC3_EVENTQ 7
+#define DWC3_AUXEVENTQ 8
+
+/* Global RX Threshold Configuration Register */
+#define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
+#define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
+
+/* Global TX Threshold Configuration Register */
+#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
+#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
+#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
+
+/* Global RX Threshold Configuration Register for DWC_usb31 only */
+#define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 16)
+#define DWC31_GRXTHRCFG_RXPKTCNT(n) (((n) & 0x1f) << 21)
+#define DWC31_GRXTHRCFG_PKTCNTSEL BIT(26)
+#define DWC31_RXTHRNUMPKTSEL_HS_PRD BIT(15)
+#define DWC31_RXTHRNUMPKT_HS_PRD(n) (((n) & 0x3) << 13)
+#define DWC31_RXTHRNUMPKTSEL_PRD BIT(10)
+#define DWC31_RXTHRNUMPKT_PRD(n) (((n) & 0x1f) << 5)
+#define DWC31_MAXRXBURSTSIZE_PRD(n) ((n) & 0x1f)
+
+/* Global TX Threshold Configuration Register for DWC_usb31 only */
+#define DWC31_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0x1f) << 16)
+#define DWC31_GTXTHRCFG_TXPKTCNT(n) (((n) & 0x1f) << 21)
+#define DWC31_GTXTHRCFG_PKTCNTSEL BIT(26)
+#define DWC31_TXTHRNUMPKTSEL_HS_PRD BIT(15)
+#define DWC31_TXTHRNUMPKT_HS_PRD(n) (((n) & 0x3) << 13)
+#define DWC31_TXTHRNUMPKTSEL_PRD BIT(10)
+#define DWC31_TXTHRNUMPKT_PRD(n) (((n) & 0x1f) << 5)
+#define DWC31_MAXTXBURSTSIZE_PRD(n) ((n) & 0x1f)
+
+/* Global Configuration Register */
+#define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19)
+#define DWC3_GCTL_PWRDNSCALE_MASK GENMASK(31, 19)
+#define DWC3_GCTL_U2RSTECN BIT(16)
+#define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6)
+#define DWC3_GCTL_CLK_BUS (0)
+#define DWC3_GCTL_CLK_PIPE (1)
+#define DWC3_GCTL_CLK_PIPEHALF (2)
+#define DWC3_GCTL_CLK_MASK (3)
+
+#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
+#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
+#define DWC3_GCTL_PRTCAP_HOST 1
+#define DWC3_GCTL_PRTCAP_DEVICE 2
+#define DWC3_GCTL_PRTCAP_OTG 3
+
+#define DWC3_GCTL_CORESOFTRESET BIT(11)
+#define DWC3_GCTL_SOFITPSYNC BIT(10)
+#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE BIT(3)
+#define DWC3_GCTL_U2EXIT_LFPS BIT(2)
+#define DWC3_GCTL_GBLHIBERNATIONEN BIT(1)
+#define DWC3_GCTL_DSBLCLKGTNG BIT(0)
+
+/* Global User Control 1 Register */
+#define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT BIT(31)
+#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
+#define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26)
+#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
+#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10)
+
+/* Global Status Register */
+#define DWC3_GSTS_OTG_IP BIT(10)
+#define DWC3_GSTS_BC_IP BIT(9)
+#define DWC3_GSTS_ADP_IP BIT(8)
+#define DWC3_GSTS_HOST_IP BIT(7)
+#define DWC3_GSTS_DEVICE_IP BIT(6)
+#define DWC3_GSTS_CSR_TIMEOUT BIT(5)
+#define DWC3_GSTS_BUS_ERR_ADDR_VLD BIT(4)
+#define DWC3_GSTS_CURMOD(n) ((n) & 0x3)
+#define DWC3_GSTS_CURMOD_DEVICE 0
+#define DWC3_GSTS_CURMOD_HOST 1
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31)
+#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS BIT(30)
+#define DWC3_GUSB2PHYCFG_SUSPHY BIT(6)
+#define DWC3_GUSB2PHYCFG_ULPI_UTMI BIT(4)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM BIT(8)
+#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf)
+#define USBTRDTIM_UTMI_8_BIT 9
+#define USBTRDTIM_UTMI_16_BIT 5
+#define UTMI_PHYIF_16_BIT 1
+#define UTMI_PHYIF_8_BIT 0
+
+/* Global USB2 PHY Vendor Control Register */
+#define DWC3_GUSB2PHYACC_NEWREGREQ BIT(25)
+#define DWC3_GUSB2PHYACC_DONE BIT(24)
+#define DWC3_GUSB2PHYACC_BUSY BIT(23)
+#define DWC3_GUSB2PHYACC_WRITE BIT(22)
+#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
+#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8)
+#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff)
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST BIT(31)
+#define DWC3_GUSB3PIPECTL_U2SSINP3OK BIT(29)
+#define DWC3_GUSB3PIPECTL_DISRXDETINP3 BIT(28)
+#define DWC3_GUSB3PIPECTL_UX_EXIT_PX BIT(27)
+#define DWC3_GUSB3PIPECTL_REQP1P2P3 BIT(24)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7)
+#define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1)
+#define DWC3_GUSB3PIPECTL_DEPOCHANGE BIT(18)
+#define DWC3_GUSB3PIPECTL_SUSPHY BIT(17)
+#define DWC3_GUSB3PIPECTL_LFPSFILT BIT(9)
+#define DWC3_GUSB3PIPECTL_RX_DETOPOLL BIT(8)
+#define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3)
+#define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1)
+
+/* Global TX Fifo Size Register */
+#define DWC31_GTXFIFOSIZ_TXFRAMNUM BIT(15) /* DWC_usb31 only */
+#define DWC31_GTXFIFOSIZ_TXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */
+#define DWC3_GTXFIFOSIZ_TXFDEP(n) ((n) & 0xffff)
+#define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000)
+
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n) ((n) & 0x7fff) /* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n) ((n) & 0xffff)
+
+/* Global Event Size Registers */
+#define DWC3_GEVNTSIZ_INTMASK BIT(31)
+#define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff)
+
+/* Global HWPARAMS0 Register */
+#define DWC3_GHWPARAMS0_MODE(n) ((n) & 0x3)
+#define DWC3_GHWPARAMS0_MODE_GADGET 0
+#define DWC3_GHWPARAMS0_MODE_HOST 1
+#define DWC3_GHWPARAMS0_MODE_DRD 2
+#define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7)
+#define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3)
+#define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff)
+#define DWC3_GHWPARAMS0_SDWIDTH(n) (((n) >> 16) & 0xff)
+#define DWC3_GHWPARAMS0_AWIDTH(n) (((n) >> 24) & 0xff)
+
+/* Global HWPARAMS1 Register */
+#define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT_NO 0
+#define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1
+#define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2
+#define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24)
+#define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3)
+#define DWC3_GHWPARAMS1_ENDBC BIT(31)
+
+/* Global HWPARAMS3 Register */
+#define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3)
+#define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1
+#define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */
+#define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2)
+#define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0
+#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1
+#define DWC3_GHWPARAMS3_HSPHY_IFC_ULPI 2
+#define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI 3
+#define DWC3_GHWPARAMS3_FSPHY_IFC(n) (((n) & (3 << 4)) >> 4)
+#define DWC3_GHWPARAMS3_FSPHY_IFC_DIS 0
+#define DWC3_GHWPARAMS3_FSPHY_IFC_ENA 1
+
+/* Global HWPARAMS4 Register */
+#define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13)
+#define DWC3_MAX_HIBER_SCRATCHBUFS 15
+
+/* Global HWPARAMS6 Register */
+#define DWC3_GHWPARAMS6_BCSUPPORT BIT(14)
+#define DWC3_GHWPARAMS6_OTG3SUPPORT BIT(13)
+#define DWC3_GHWPARAMS6_ADPSUPPORT BIT(12)
+#define DWC3_GHWPARAMS6_HNPSUPPORT BIT(11)
+#define DWC3_GHWPARAMS6_SRPSUPPORT BIT(10)
+#define DWC3_GHWPARAMS6_EN_FPGA BIT(7)
+
+/* DWC_usb32 only */
+#define DWC3_GHWPARAMS6_MDWIDTH(n) ((n) & (0x3 << 8))
+
+/* Global HWPARAMS7 Register */
+#define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff)
+#define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff)
+
+/* Global HWPARAMS9 Register */
+#define DWC3_GHWPARAMS9_DEV_TXF_FLUSH_BYPASS BIT(0)
+#define DWC3_GHWPARAMS9_DEV_MST BIT(1)
+
+/* Global Frame Length Adjustment Register */
+#define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7)
+#define DWC3_GFLADJ_30MHZ_MASK 0x3f
+#define DWC3_GFLADJ_REFCLK_FLADJ_MASK GENMASK(21, 8)
+#define DWC3_GFLADJ_REFCLK_LPM_SEL BIT(23)
+#define DWC3_GFLADJ_240MHZDECR GENMASK(30, 24)
+#define DWC3_GFLADJ_240MHZDECR_PLS1 BIT(31)
+
+/* Global User Control Register*/
+#define DWC3_GUCTL_REFCLKPER_MASK 0xffc00000
+#define DWC3_GUCTL_REFCLKPER_SEL 22
+
+/* Global User Control Register 2 */
+#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
+
+/* Global User Control Register 3 */
+#define DWC3_GUCTL3_SPLITDISABLE BIT(14)
+
+/* Device Configuration Register */
+#define DWC3_DCFG_NUMLANES(n) (((n) & 0x3) << 30) /* DWC_usb32 only */
+
+#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
+#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
+
+#define DWC3_DCFG_SPEED_MASK (7 << 0)
+#define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
+#define DWC3_DCFG_SUPERSPEED (4 << 0)
+#define DWC3_DCFG_HIGHSPEED (0 << 0)
+#define DWC3_DCFG_FULLSPEED BIT(0)
+
+#define DWC3_DCFG_NUMP_SHIFT 17
+#define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
+#define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT)
+#define DWC3_DCFG_LPM_CAP BIT(22)
+#define DWC3_DCFG_IGNSTRMPP BIT(23)
+
+/* Device Control Register */
+#define DWC3_DCTL_RUN_STOP BIT(31)
+#define DWC3_DCTL_CSFTRST BIT(30)
+#define DWC3_DCTL_LSFTRST BIT(29)
+
+#define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24)
+#define DWC3_DCTL_HIRD_THRES(n) ((n) << 24)
+
+#define DWC3_DCTL_APPL1RES BIT(23)
+
+/* These apply for core versions 1.87a and earlier */
+#define DWC3_DCTL_TRGTULST_MASK (0x0f << 17)
+#define DWC3_DCTL_TRGTULST(n) ((n) << 17)
+#define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2))
+#define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3))
+#define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4))
+#define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5))
+#define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6))
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DCTL_NYET_THRES(n) (((n) & 0xf) << 20)
+
+#define DWC3_DCTL_KEEP_CONNECT BIT(19)
+#define DWC3_DCTL_L1_HIBER_EN BIT(18)
+#define DWC3_DCTL_CRS BIT(17)
+#define DWC3_DCTL_CSS BIT(16)
+
+#define DWC3_DCTL_INITU2ENA BIT(12)
+#define DWC3_DCTL_ACCEPTU2ENA BIT(11)
+#define DWC3_DCTL_INITU1ENA BIT(10)
+#define DWC3_DCTL_ACCEPTU1ENA BIT(9)
+#define DWC3_DCTL_TSTCTRL_MASK (0xf << 1)
+
+#define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5)
+#define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK)
+
+#define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0))
+#define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4))
+#define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5))
+#define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6))
+#define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8))
+#define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10))
+#define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11))
+
+/* Device Event Enable Register */
+#define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN BIT(12)
+#define DWC3_DEVTEN_EVNTOVERFLOWEN BIT(11)
+#define DWC3_DEVTEN_CMDCMPLTEN BIT(10)
+#define DWC3_DEVTEN_ERRTICERREN BIT(9)
+#define DWC3_DEVTEN_SOFEN BIT(7)
+#define DWC3_DEVTEN_U3L2L1SUSPEN BIT(6)
+#define DWC3_DEVTEN_HIBERNATIONREQEVTEN BIT(5)
+#define DWC3_DEVTEN_WKUPEVTEN BIT(4)
+#define DWC3_DEVTEN_ULSTCNGEN BIT(3)
+#define DWC3_DEVTEN_CONNECTDONEEN BIT(2)
+#define DWC3_DEVTEN_USBRSTEN BIT(1)
+#define DWC3_DEVTEN_DISCONNEVTEN BIT(0)
+
+#define DWC3_DSTS_CONNLANES(n) (((n) >> 30) & 0x3) /* DWC_usb32 only */
+
+/* Device Status Register */
+#define DWC3_DSTS_DCNRD BIT(29)
+
+/* This applies for core versions 1.87a and earlier */
+#define DWC3_DSTS_PWRUPREQ BIT(24)
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DSTS_RSS BIT(25)
+#define DWC3_DSTS_SSS BIT(24)
+
+#define DWC3_DSTS_COREIDLE BIT(23)
+#define DWC3_DSTS_DEVCTRLHLT BIT(22)
+
+#define DWC3_DSTS_USBLNKST_MASK (0x0f << 18)
+#define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18)
+
+#define DWC3_DSTS_RXFIFOEMPTY BIT(17)
+
+#define DWC3_DSTS_SOFFN_MASK (0x3fff << 3)
+#define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3)
+
+#define DWC3_DSTS_CONNECTSPD (7 << 0)
+
+#define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */
+#define DWC3_DSTS_SUPERSPEED (4 << 0)
+#define DWC3_DSTS_HIGHSPEED (0 << 0)
+#define DWC3_DSTS_FULLSPEED BIT(0)
+
+/* Device Generic Command Register */
+#define DWC3_DGCMD_SET_LMP 0x01
+#define DWC3_DGCMD_SET_PERIODIC_PAR 0x02
+#define DWC3_DGCMD_XMIT_FUNCTION 0x03
+
+/* These apply for core versions 1.94a and later */
+#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO 0x04
+#define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI 0x05
+
+#define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09
+#define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a
+#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
+#define DWC3_DGCMD_SET_ENDPOINT_PRIME 0x0d
+#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
+
+#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F)
+#define DWC3_DGCMD_CMDACT BIT(10)
+#define DWC3_DGCMD_CMDIOC BIT(8)
+
+/* Device Generic Command Parameter Register */
+#define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT BIT(0)
+#define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0)
+#define DWC3_DGCMDPAR_RX_FIFO (0 << 5)
+#define DWC3_DGCMDPAR_TX_FIFO BIT(5)
+#define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0)
+#define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0)
+
+/* Device Endpoint Command Register */
+#define DWC3_DEPCMD_PARAM_SHIFT 16
+#define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT)
+#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
+#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
+#define DWC3_DEPCMD_HIPRI_FORCERM BIT(11)
+#define DWC3_DEPCMD_CLEARPENDIN BIT(11)
+#define DWC3_DEPCMD_CMDACT BIT(10)
+#define DWC3_DEPCMD_CMDIOC BIT(8)
+
+#define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0)
+#define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0)
+#define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0)
+#define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0)
+#define DWC3_DEPCMD_CLEARSTALL (0x05 << 0)
+#define DWC3_DEPCMD_SETSTALL (0x04 << 0)
+/* This applies for core versions 1.90a and earlier */
+#define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0)
+/* This applies for core versions 1.94a and later */
+#define DWC3_DEPCMD_GETEPSTATE (0x03 << 0)
+#define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0)
+#define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0)
+
+#define DWC3_DEPCMD_CMD(x) ((x) & 0xf)
+
+/* The EP number goes 0..31 so ep0 is always out and ep1 is always in */
+#define DWC3_DALEPENA_EP(n) BIT(n)
+
+/* DWC_usb32 DCFG1 config */
+#define DWC3_DCFG1_DIS_MST_ENH BIT(1)
+
+#define DWC3_DEPCMD_TYPE_CONTROL 0
+#define DWC3_DEPCMD_TYPE_ISOC 1
+#define DWC3_DEPCMD_TYPE_BULK 2
+#define DWC3_DEPCMD_TYPE_INTR 3
+
+#define DWC3_DEV_IMOD_COUNT_SHIFT 16
+#define DWC3_DEV_IMOD_COUNT_MASK (0xffff << 16)
+#define DWC3_DEV_IMOD_INTERVAL_SHIFT 0
+#define DWC3_DEV_IMOD_INTERVAL_MASK (0xffff << 0)
+
+/* OTG Configuration Register */
+#define DWC3_OCFG_DISPWRCUTTOFF BIT(5)
+#define DWC3_OCFG_HIBDISMASK BIT(4)
+#define DWC3_OCFG_SFTRSTMASK BIT(3)
+#define DWC3_OCFG_OTGVERSION BIT(2)
+#define DWC3_OCFG_HNPCAP BIT(1)
+#define DWC3_OCFG_SRPCAP BIT(0)
+
+/* OTG CTL Register */
+#define DWC3_OCTL_OTG3GOERR BIT(7)
+#define DWC3_OCTL_PERIMODE BIT(6)
+#define DWC3_OCTL_PRTPWRCTL BIT(5)
+#define DWC3_OCTL_HNPREQ BIT(4)
+#define DWC3_OCTL_SESREQ BIT(3)
+#define DWC3_OCTL_TERMSELIDPULSE BIT(2)
+#define DWC3_OCTL_DEVSETHNPEN BIT(1)
+#define DWC3_OCTL_HSTSETHNPEN BIT(0)
+
+/* OTG Event Register */
+#define DWC3_OEVT_DEVICEMODE BIT(31)
+#define DWC3_OEVT_XHCIRUNSTPSET BIT(27)
+#define DWC3_OEVT_DEVRUNSTPSET BIT(26)
+#define DWC3_OEVT_HIBENTRY BIT(25)
+#define DWC3_OEVT_CONIDSTSCHNG BIT(24)
+#define DWC3_OEVT_HRRCONFNOTIF BIT(23)
+#define DWC3_OEVT_HRRINITNOTIF BIT(22)
+#define DWC3_OEVT_ADEVIDLE BIT(21)
+#define DWC3_OEVT_ADEVBHOSTEND BIT(20)
+#define DWC3_OEVT_ADEVHOST BIT(19)
+#define DWC3_OEVT_ADEVHNPCHNG BIT(18)
+#define DWC3_OEVT_ADEVSRPDET BIT(17)
+#define DWC3_OEVT_ADEVSESSENDDET BIT(16)
+#define DWC3_OEVT_BDEVBHOSTEND BIT(11)
+#define DWC3_OEVT_BDEVHNPCHNG BIT(10)
+#define DWC3_OEVT_BDEVSESSVLDDET BIT(9)
+#define DWC3_OEVT_BDEVVBUSCHNG BIT(8)
+#define DWC3_OEVT_BSESSVLD BIT(3)
+#define DWC3_OEVT_HSTNEGSTS BIT(2)
+#define DWC3_OEVT_SESREQSTS BIT(1)
+#define DWC3_OEVT_ERROR BIT(0)
+
+/* OTG Event Enable Register */
+#define DWC3_OEVTEN_XHCIRUNSTPSETEN BIT(27)
+#define DWC3_OEVTEN_DEVRUNSTPSETEN BIT(26)
+#define DWC3_OEVTEN_HIBENTRYEN BIT(25)
+#define DWC3_OEVTEN_CONIDSTSCHNGEN BIT(24)
+#define DWC3_OEVTEN_HRRCONFNOTIFEN BIT(23)
+#define DWC3_OEVTEN_HRRINITNOTIFEN BIT(22)
+#define DWC3_OEVTEN_ADEVIDLEEN BIT(21)
+#define DWC3_OEVTEN_ADEVBHOSTENDEN BIT(20)
+#define DWC3_OEVTEN_ADEVHOSTEN BIT(19)
+#define DWC3_OEVTEN_ADEVHNPCHNGEN BIT(18)
+#define DWC3_OEVTEN_ADEVSRPDETEN BIT(17)
+#define DWC3_OEVTEN_ADEVSESSENDDETEN BIT(16)
+#define DWC3_OEVTEN_BDEVBHOSTENDEN BIT(11)
+#define DWC3_OEVTEN_BDEVHNPCHNGEN BIT(10)
+#define DWC3_OEVTEN_BDEVSESSVLDDETEN BIT(9)
+#define DWC3_OEVTEN_BDEVVBUSCHNGEN BIT(8)
+
+/* OTG Status Register */
+#define DWC3_OSTS_DEVRUNSTP BIT(13)
+#define DWC3_OSTS_XHCIRUNSTP BIT(12)
+#define DWC3_OSTS_PERIPHERALSTATE BIT(4)
+#define DWC3_OSTS_XHCIPRTPOWER BIT(3)
+#define DWC3_OSTS_BSESVLD BIT(2)
+#define DWC3_OSTS_VBUSVLD BIT(1)
+#define DWC3_OSTS_CONIDSTS BIT(0)
+
+/* Structures */
+
+struct dwc3_trb;
+
+/**
+ * struct dwc3_event_buffer - Software event buffer representation
+ * @buf: _THE_ buffer
+ * @cache: The buffer cache used in the threaded interrupt
+ * @length: size of this buffer
+ * @lpos: event offset
+ * @count: cache of last read event count register
+ * @flags: flags related to this event buffer
+ * @dma: dma_addr_t
+ * @dwc: pointer to DWC controller
+ */
+struct dwc3_event_buffer {
+ void *buf;
+ void *cache;
+ unsigned int length;
+ unsigned int lpos;
+ unsigned int count;
+ unsigned int flags;
+
+#define DWC3_EVENT_PENDING BIT(0)
+
+ dma_addr_t dma;
+
+ struct dwc3 *dwc;
+};
+
+#define DWC3_EP_FLAG_STALLED BIT(0)
+#define DWC3_EP_FLAG_WEDGED BIT(1)
+
+#define DWC3_EP_DIRECTION_TX true
+#define DWC3_EP_DIRECTION_RX false
+
+#define DWC3_TRB_NUM 256
+
+/**
+ * struct dwc3_ep - device side endpoint representation
+ * @endpoint: usb endpoint
+ * @cancelled_list: list of cancelled requests for this endpoint
+ * @pending_list: list of pending requests for this endpoint
+ * @started_list: list of started requests on this endpoint
+ * @regs: pointer to first endpoint register
+ * @trb_pool: array of transaction buffers
+ * @trb_pool_dma: dma address of @trb_pool
+ * @trb_enqueue: enqueue 'pointer' into TRB array
+ * @trb_dequeue: dequeue 'pointer' into TRB array
+ * @dwc: pointer to DWC controller
+ * @saved_state: ep state saved during hibernation
+ * @flags: endpoint flags (wedged, stalled, ...)
+ * @number: endpoint number (1 - 15)
+ * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
+ * @resource_index: Resource transfer index
+ * @frame_number: set to the frame number we want this transfer to start (ISOC)
+ * @interval: the interval on which the ISOC transfer is started
+ * @name: a human readable name e.g. ep1out-bulk
+ * @direction: true for TX, false for RX
+ * @stream_capable: true when streams are enabled
+ * @combo_num: the test combination BIT[15:14] of the frame number to test
+ * isochronous START TRANSFER command failure workaround
+ * @start_cmd_status: the status of testing START TRANSFER command with
+ * combo_num = 'b00
+ */
+struct dwc3_ep {
+ struct usb_ep endpoint;
+ struct list_head cancelled_list;
+ struct list_head pending_list;
+ struct list_head started_list;
+
+ void __iomem *regs;
+
+ struct dwc3_trb *trb_pool;
+ dma_addr_t trb_pool_dma;
+ struct dwc3 *dwc;
+
+ u32 saved_state;
+ unsigned int flags;
+#define DWC3_EP_ENABLED BIT(0)
+#define DWC3_EP_STALL BIT(1)
+#define DWC3_EP_WEDGE BIT(2)
+#define DWC3_EP_TRANSFER_STARTED BIT(3)
+#define DWC3_EP_END_TRANSFER_PENDING BIT(4)
+#define DWC3_EP_PENDING_REQUEST BIT(5)
+#define DWC3_EP_DELAY_START BIT(6)
+#define DWC3_EP_WAIT_TRANSFER_COMPLETE BIT(7)
+#define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8)
+#define DWC3_EP_FORCE_RESTART_STREAM BIT(9)
+#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10)
+#define DWC3_EP_PENDING_CLEAR_STALL BIT(11)
+#define DWC3_EP_TXFIFO_RESIZED BIT(12)
+#define DWC3_EP_DELAY_STOP BIT(13)
+
+ /* This last one is specific to EP0 */
+#define DWC3_EP0_DIR_IN BIT(31)
+
+ /*
+ * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will
+ * use a u8 type here. If anybody decides to increase number of TRBs to
+ * anything larger than 256 - I can't see why people would want to do
+ * this though - then this type needs to be changed.
+ *
+ * By using u8 types we ensure that our % operator when incrementing
+ * enqueue and dequeue get optimized away by the compiler.
+ */
+ u8 trb_enqueue;
+ u8 trb_dequeue;
+
+ u8 number;
+ u8 type;
+ u8 resource_index;
+ u32 frame_number;
+ u32 interval;
+
+ char name[20];
+
+ unsigned direction:1;
+ unsigned stream_capable:1;
+
+ /* For isochronous START TRANSFER workaround only */
+ u8 combo_num;
+ int start_cmd_status;
+};
+
+enum dwc3_phy {
+ DWC3_PHY_UNKNOWN = 0,
+ DWC3_PHY_USB3,
+ DWC3_PHY_USB2,
+};
+
+enum dwc3_ep0_next {
+ DWC3_EP0_UNKNOWN = 0,
+ DWC3_EP0_COMPLETE,
+ DWC3_EP0_NRDY_DATA,
+ DWC3_EP0_NRDY_STATUS,
+};
+
+enum dwc3_ep0_state {
+ EP0_UNCONNECTED = 0,
+ EP0_SETUP_PHASE,
+ EP0_DATA_PHASE,
+ EP0_STATUS_PHASE,
+};
+
+enum dwc3_link_state {
+ /* In SuperSpeed */
+ DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */
+ DWC3_LINK_STATE_U1 = 0x01,
+ DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */
+ DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */
+ DWC3_LINK_STATE_SS_DIS = 0x04,
+ DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */
+ DWC3_LINK_STATE_SS_INACT = 0x06,
+ DWC3_LINK_STATE_POLL = 0x07,
+ DWC3_LINK_STATE_RECOV = 0x08,
+ DWC3_LINK_STATE_HRESET = 0x09,
+ DWC3_LINK_STATE_CMPLY = 0x0a,
+ DWC3_LINK_STATE_LPBK = 0x0b,
+ DWC3_LINK_STATE_RESET = 0x0e,
+ DWC3_LINK_STATE_RESUME = 0x0f,
+ DWC3_LINK_STATE_MASK = 0x0f,
+};
+
+/* TRB Length, PCM and Status */
+#define DWC3_TRB_SIZE_MASK (0x00ffffff)
+#define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK)
+#define DWC3_TRB_SIZE_PCM1(n) (((n) & 0x03) << 24)
+#define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28)) >> 28)
+
+#define DWC3_TRBSTS_OK 0
+#define DWC3_TRBSTS_MISSED_ISOC 1
+#define DWC3_TRBSTS_SETUP_PENDING 2
+#define DWC3_TRB_STS_XFER_IN_PROG 4
+
+/* TRB Control */
+#define DWC3_TRB_CTRL_HWO BIT(0)
+#define DWC3_TRB_CTRL_LST BIT(1)
+#define DWC3_TRB_CTRL_CHN BIT(2)
+#define DWC3_TRB_CTRL_CSP BIT(3)
+#define DWC3_TRB_CTRL_TRBCTL(n) (((n) & 0x3f) << 4)
+#define DWC3_TRB_CTRL_ISP_IMI BIT(10)
+#define DWC3_TRB_CTRL_IOC BIT(11)
+#define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14)
+#define DWC3_TRB_CTRL_GET_SID_SOFN(n) (((n) & (0xffff << 14)) >> 14)
+
+#define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4))
+#define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1)
+#define DWC3_TRBCTL_CONTROL_SETUP DWC3_TRB_CTRL_TRBCTL(2)
+#define DWC3_TRBCTL_CONTROL_STATUS2 DWC3_TRB_CTRL_TRBCTL(3)
+#define DWC3_TRBCTL_CONTROL_STATUS3 DWC3_TRB_CTRL_TRBCTL(4)
+#define DWC3_TRBCTL_CONTROL_DATA DWC3_TRB_CTRL_TRBCTL(5)
+#define DWC3_TRBCTL_ISOCHRONOUS_FIRST DWC3_TRB_CTRL_TRBCTL(6)
+#define DWC3_TRBCTL_ISOCHRONOUS DWC3_TRB_CTRL_TRBCTL(7)
+#define DWC3_TRBCTL_LINK_TRB DWC3_TRB_CTRL_TRBCTL(8)
+
+/**
+ * struct dwc3_trb - transfer request block (hw format)
+ * @bpl: DW0-3
+ * @bph: DW4-7
+ * @size: DW8-B
+ * @ctrl: DWC-F
+ */
+struct dwc3_trb {
+ u32 bpl;
+ u32 bph;
+ u32 size;
+ u32 ctrl;
+} __packed;
+
+/**
+ * struct dwc3_hwparams - copy of HWPARAMS registers
+ * @hwparams0: GHWPARAMS0
+ * @hwparams1: GHWPARAMS1
+ * @hwparams2: GHWPARAMS2
+ * @hwparams3: GHWPARAMS3
+ * @hwparams4: GHWPARAMS4
+ * @hwparams5: GHWPARAMS5
+ * @hwparams6: GHWPARAMS6
+ * @hwparams7: GHWPARAMS7
+ * @hwparams8: GHWPARAMS8
+ * @hwparams9: GHWPARAMS9
+ */
+struct dwc3_hwparams {
+ u32 hwparams0;
+ u32 hwparams1;
+ u32 hwparams2;
+ u32 hwparams3;
+ u32 hwparams4;
+ u32 hwparams5;
+ u32 hwparams6;
+ u32 hwparams7;
+ u32 hwparams8;
+ u32 hwparams9;
+};
+
+/* HWPARAMS0 */
+#define DWC3_MODE(n) ((n) & 0x7)
+
+/* HWPARAMS1 */
+#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
+
+/* HWPARAMS3 */
+#define DWC3_NUM_IN_EPS_MASK (0x1f << 18)
+#define DWC3_NUM_EPS_MASK (0x3f << 12)
+#define DWC3_NUM_EPS(p) (((p)->hwparams3 & \
+ (DWC3_NUM_EPS_MASK)) >> 12)
+#define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \
+ (DWC3_NUM_IN_EPS_MASK)) >> 18)
+
+/* HWPARAMS7 */
+#define DWC3_RAM1_DEPTH(n) ((n) & 0xffff)
+
+/* HWPARAMS9 */
+#define DWC3_MST_CAPABLE(p) (!!((p)->hwparams9 & \
+ DWC3_GHWPARAMS9_DEV_MST))
+
+/**
+ * struct dwc3_request - representation of a transfer request
+ * @request: struct usb_request to be transferred
+ * @list: a list_head used for request queueing
+ * @dep: struct dwc3_ep owning this request
+ * @sg: pointer to first incomplete sg
+ * @start_sg: pointer to the sg which should be queued next
+ * @num_pending_sgs: counter to pending sgs
+ * @num_queued_sgs: counter to the number of sgs which already got queued
+ * @remaining: amount of data remaining
+ * @status: internal dwc3 request status tracking
+ * @epnum: endpoint number to which this request refers
+ * @trb: pointer to struct dwc3_trb
+ * @trb_dma: DMA address of @trb
+ * @num_trbs: number of TRBs used by this request
+ * @needs_extra_trb: true when request needs one extra TRB (either due to ZLP
+ * or unaligned OUT)
+ * @direction: IN or OUT direction flag
+ * @mapped: true when request has been dma-mapped
+ */
+struct dwc3_request {
+ struct usb_request request;
+ struct list_head list;
+ struct dwc3_ep *dep;
+ struct scatterlist *sg;
+ struct scatterlist *start_sg;
+
+ unsigned int num_pending_sgs;
+ unsigned int num_queued_sgs;
+ unsigned int remaining;
+
+ unsigned int status;
+#define DWC3_REQUEST_STATUS_QUEUED 0
+#define DWC3_REQUEST_STATUS_STARTED 1
+#define DWC3_REQUEST_STATUS_DISCONNECTED 2
+#define DWC3_REQUEST_STATUS_DEQUEUED 3
+#define DWC3_REQUEST_STATUS_STALLED 4
+#define DWC3_REQUEST_STATUS_COMPLETED 5
+#define DWC3_REQUEST_STATUS_UNKNOWN -1
+
+ u8 epnum;
+ struct dwc3_trb *trb;
+ dma_addr_t trb_dma;
+
+ unsigned int num_trbs;
+
+ unsigned int needs_extra_trb:1;
+ unsigned int direction:1;
+ unsigned int mapped:1;
+};
+
+/*
+ * struct dwc3_scratchpad_array - hibernation scratchpad array
+ * (format defined by hw)
+ */
+struct dwc3_scratchpad_array {
+ __le64 dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS];
+};
+
+/**
+ * struct dwc3 - representation of our controller
+ * @drd_work: workqueue used for role swapping
+ * @ep0_trb: trb which is used for the ctrl_req
+ * @bounce: address of bounce buffer
+ * @scratchbuf: address of scratch buffer
+ * @setup_buf: used while precessing STD USB requests
+ * @ep0_trb_addr: dma address of @ep0_trb
+ * @bounce_addr: dma address of @bounce
+ * @ep0_usb_req: dummy req used while handling STD USB requests
+ * @scratch_addr: dma address of scratchbuf
+ * @ep0_in_setup: one control transfer is completed and enter setup phase
+ * @lock: for synchronizing
+ * @mutex: for mode switching
+ * @dev: pointer to our struct device
+ * @sysdev: pointer to the DMA-capable device
+ * @xhci: pointer to our xHCI child
+ * @xhci_resources: struct resources for our @xhci child
+ * @ev_buf: struct dwc3_event_buffer pointer
+ * @eps: endpoint array
+ * @gadget: device side representation of the peripheral controller
+ * @gadget_driver: pointer to the gadget driver
+ * @bus_clk: clock for accessing the registers
+ * @ref_clk: reference clock
+ * @susp_clk: clock used when the SS phy is in low power (S3) state
+ * @reset: reset control
+ * @regs: base address for our registers
+ * @regs_size: address space size
+ * @fladj: frame length adjustment
+ * @ref_clk_per: reference clock period configuration
+ * @irq_gadget: peripheral controller's IRQ number
+ * @otg_irq: IRQ number for OTG IRQs
+ * @current_otg_role: current role of operation while using the OTG block
+ * @desired_otg_role: desired role of operation while using the OTG block
+ * @otg_restart_host: flag that OTG controller needs to restart host
+ * @nr_scratch: number of scratch buffers
+ * @u1u2: only used on revisions <1.83a for workaround
+ * @maximum_speed: maximum speed requested (mainly for testing purposes)
+ * @max_ssp_rate: SuperSpeed Plus maximum signaling rate and lane count
+ * @gadget_max_speed: maximum gadget speed requested
+ * @gadget_ssp_rate: Gadget driver's maximum supported SuperSpeed Plus signaling
+ * rate and lane count.
+ * @ip: controller's ID
+ * @revision: controller's version of an IP
+ * @version_type: VERSIONTYPE register contents, a sub release of a revision
+ * @dr_mode: requested mode of operation
+ * @current_dr_role: current role of operation when in dual-role mode
+ * @desired_dr_role: desired role of operation when in dual-role mode
+ * @edev: extcon handle
+ * @edev_nb: extcon notifier
+ * @hsphy_mode: UTMI phy mode, one of following:
+ * - USBPHY_INTERFACE_MODE_UTMI
+ * - USBPHY_INTERFACE_MODE_UTMIW
+ * @role_sw: usb_role_switch handle
+ * @role_switch_default_mode: default operation mode of controller while
+ * usb role is USB_ROLE_NONE.
+ * @usb_psy: pointer to power supply interface.
+ * @usb2_phy: pointer to USB2 PHY
+ * @usb3_phy: pointer to USB3 PHY
+ * @usb2_generic_phy: pointer to USB2 PHY
+ * @usb3_generic_phy: pointer to USB3 PHY
+ * @phys_ready: flag to indicate that PHYs are ready
+ * @ulpi: pointer to ulpi interface
+ * @ulpi_ready: flag to indicate that ULPI is initialized
+ * @u2sel: parameter from Set SEL request.
+ * @u2pel: parameter from Set SEL request.
+ * @u1sel: parameter from Set SEL request.
+ * @u1pel: parameter from Set SEL request.
+ * @num_eps: number of endpoints
+ * @ep0_next_event: hold the next expected event
+ * @ep0state: state of endpoint zero
+ * @link_state: link state
+ * @speed: device speed (super, high, full, low)
+ * @hwparams: copy of hwparams registers
+ * @regset: debugfs pointer to regdump file
+ * @dbg_lsp_select: current debug lsp mux register selection
+ * @test_mode: true when we're entering a USB test mode
+ * @test_mode_nr: test feature selector
+ * @lpm_nyet_threshold: LPM NYET response threshold
+ * @hird_threshold: HIRD threshold
+ * @rx_thr_num_pkt: USB receive packet count
+ * @rx_max_burst: max USB receive burst size
+ * @tx_thr_num_pkt: USB transmit packet count
+ * @tx_max_burst: max USB transmit burst size
+ * @rx_thr_num_pkt_prd: periodic ESS receive packet count
+ * @rx_max_burst_prd: max periodic ESS receive burst size
+ * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
+ * @tx_max_burst_prd: max periodic ESS transmit burst size
+ * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
+ * @clear_stall_protocol: endpoint number that requires a delayed status phase
+ * @hsphy_interface: "utmi" or "ulpi"
+ * @connected: true when we're connected to a host, false otherwise
+ * @softconnect: true when gadget connect is called, false when disconnect runs
+ * @delayed_status: true when gadget driver asks for delayed status
+ * @ep0_bounced: true when we used bounce buffer
+ * @ep0_expect_in: true when we expect a DATA IN transfer
+ * @has_hibernation: true when dwc3 was configured with Hibernation
+ * @sysdev_is_parent: true when dwc3 device has a parent driver
+ * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that
+ * there's now way for software to detect this in runtime.
+ * @is_utmi_l1_suspend: the core asserts output signal
+ * 0 - utmi_sleep_n
+ * 1 - utmi_l1_suspend_n
+ * @is_fpga: true when we are using the FPGA board
+ * @pending_events: true when we have pending IRQs to be handled
+ * @do_fifo_resize: true when txfifo resizing is enabled for dwc3 endpoints
+ * @pullups_connected: true when Run/Stop bit is set
+ * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
+ * @three_stage_setup: set if we perform a three phase setup
+ * @dis_start_transfer_quirk: set if start_transfer failure SW workaround is
+ * not needed for DWC_usb31 version 1.70a-ea06 and below
+ * @usb3_lpm_capable: set if hadrware supports Link Power Management
+ * @usb2_lpm_disable: set to disable usb2 lpm for host
+ * @usb2_gadget_lpm_disable: set to disable usb2 lpm for gadget
+ * @disable_scramble_quirk: set if we enable the disable scramble quirk
+ * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
+ * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk
+ * @req_p1p2p3_quirk: set if we enable request p1p2p3 quirk
+ * @del_p1p2p3_quirk: set if we enable delay p1p2p3 quirk
+ * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk
+ * @lfps_filter_quirk: set if we enable LFPS filter quirk
+ * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
+ * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
+ * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
+ * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
+ * disabling the suspend signal to the PHY.
+ * @dis_u1_entry_quirk: set if link entering into U1 state needs to be disabled.
+ * @dis_u2_entry_quirk: set if link entering into U2 state needs to be disabled.
+ * @dis_rxdet_inp3_quirk: set if we disable Rx.Detect in P3
+ * @async_callbacks: if set, indicate that async callbacks will be used.
+ *
+ * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
+ * in GUSB2PHYCFG, specify that USB2 PHY doesn't
+ * provide a free-running PHY clock.
+ * @dis_del_phy_power_chg_quirk: set if we disable delay phy power
+ * change quirk.
+ * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
+ * check during HS transmit.
+ * @resume-hs-terminations: Set if we enable quirk for fixing improper crc
+ * generation after resume from suspend.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ * instances in park mode.
+ * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
+ * @tx_de_emphasis: Tx de-emphasis value
+ * 0 - -6dB de-emphasis
+ * 1 - -3.5dB de-emphasis
+ * 2 - No de-emphasis
+ * 3 - Reserved
+ * @dis_metastability_quirk: set to disable metastability quirk.
+ * @dis_split_quirk: set to disable split boundary.
+ * @suspended: set to track suspend event due to U3/L2.
+ * @imod_interval: set the interrupt moderation interval in 250ns
+ * increments or 0 to disable.
+ * @max_cfg_eps: current max number of IN eps used across all USB configs.
+ * @last_fifo_depth: last fifo depth used to determine next fifo ram start
+ * address.
+ * @num_ep_resized: carries the current number endpoints which have had its tx
+ * fifo resized.
+ * @debug_root: root debugfs directory for this device to put its files in.
+ */
+struct dwc3 {
+ struct work_struct drd_work;
+ struct dwc3_trb *ep0_trb;
+ void *bounce;
+ void *scratchbuf;
+ u8 *setup_buf;
+ dma_addr_t ep0_trb_addr;
+ dma_addr_t bounce_addr;
+ dma_addr_t scratch_addr;
+ struct dwc3_request ep0_usb_req;
+ struct completion ep0_in_setup;
+
+ /* device lock */
+ spinlock_t lock;
+
+ /* mode switching lock */
+ struct mutex mutex;
+
+ struct device *dev;
+ struct device *sysdev;
+
+ struct platform_device *xhci;
+ struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM];
+
+ struct dwc3_event_buffer *ev_buf;
+ struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM];
+
+ struct usb_gadget *gadget;
+ struct usb_gadget_driver *gadget_driver;
+
+ struct clk *bus_clk;
+ struct clk *ref_clk;
+ struct clk *susp_clk;
+
+ struct reset_control *reset;
+
+ struct usb_phy *usb2_phy;
+ struct usb_phy *usb3_phy;
+
+ struct phy *usb2_generic_phy;
+ struct phy *usb3_generic_phy;
+
+ bool phys_ready;
+
+ struct ulpi *ulpi;
+ bool ulpi_ready;
+
+ void __iomem *regs;
+ size_t regs_size;
+
+ enum usb_dr_mode dr_mode;
+ u32 current_dr_role;
+ u32 desired_dr_role;
+ struct extcon_dev *edev;
+ struct notifier_block edev_nb;
+ enum usb_phy_interface hsphy_mode;
+ struct usb_role_switch *role_sw;
+ enum usb_dr_mode role_switch_default_mode;
+
+ struct power_supply *usb_psy;
+
+ u32 fladj;
+ u32 ref_clk_per;
+ u32 irq_gadget;
+ u32 otg_irq;
+ u32 current_otg_role;
+ u32 desired_otg_role;
+ bool otg_restart_host;
+ u32 nr_scratch;
+ u32 u1u2;
+ u32 maximum_speed;
+ u32 gadget_max_speed;
+ enum usb_ssp_rate max_ssp_rate;
+ enum usb_ssp_rate gadget_ssp_rate;
+
+ u32 ip;
+
+#define DWC3_IP 0x5533
+#define DWC31_IP 0x3331
+#define DWC32_IP 0x3332
+
+ u32 revision;
+
+#define DWC3_REVISION_ANY 0x0
+#define DWC3_REVISION_173A 0x5533173a
+#define DWC3_REVISION_175A 0x5533175a
+#define DWC3_REVISION_180A 0x5533180a
+#define DWC3_REVISION_183A 0x5533183a
+#define DWC3_REVISION_185A 0x5533185a
+#define DWC3_REVISION_187A 0x5533187a
+#define DWC3_REVISION_188A 0x5533188a
+#define DWC3_REVISION_190A 0x5533190a
+#define DWC3_REVISION_194A 0x5533194a
+#define DWC3_REVISION_200A 0x5533200a
+#define DWC3_REVISION_202A 0x5533202a
+#define DWC3_REVISION_210A 0x5533210a
+#define DWC3_REVISION_220A 0x5533220a
+#define DWC3_REVISION_230A 0x5533230a
+#define DWC3_REVISION_240A 0x5533240a
+#define DWC3_REVISION_250A 0x5533250a
+#define DWC3_REVISION_260A 0x5533260a
+#define DWC3_REVISION_270A 0x5533270a
+#define DWC3_REVISION_280A 0x5533280a
+#define DWC3_REVISION_290A 0x5533290a
+#define DWC3_REVISION_300A 0x5533300a
+#define DWC3_REVISION_310A 0x5533310a
+#define DWC3_REVISION_330A 0x5533330a
+
+#define DWC31_REVISION_ANY 0x0
+#define DWC31_REVISION_110A 0x3131302a
+#define DWC31_REVISION_120A 0x3132302a
+#define DWC31_REVISION_160A 0x3136302a
+#define DWC31_REVISION_170A 0x3137302a
+#define DWC31_REVISION_180A 0x3138302a
+#define DWC31_REVISION_190A 0x3139302a
+
+#define DWC32_REVISION_ANY 0x0
+#define DWC32_REVISION_100A 0x3130302a
+
+ u32 version_type;
+
+#define DWC31_VERSIONTYPE_ANY 0x0
+#define DWC31_VERSIONTYPE_EA01 0x65613031
+#define DWC31_VERSIONTYPE_EA02 0x65613032
+#define DWC31_VERSIONTYPE_EA03 0x65613033
+#define DWC31_VERSIONTYPE_EA04 0x65613034
+#define DWC31_VERSIONTYPE_EA05 0x65613035
+#define DWC31_VERSIONTYPE_EA06 0x65613036
+
+ enum dwc3_ep0_next ep0_next_event;
+ enum dwc3_ep0_state ep0state;
+ enum dwc3_link_state link_state;
+
+ u16 u2sel;
+ u16 u2pel;
+ u8 u1sel;
+ u8 u1pel;
+
+ u8 speed;
+
+ u8 num_eps;
+
+ struct dwc3_hwparams hwparams;
+ struct debugfs_regset32 *regset;
+
+ u32 dbg_lsp_select;
+
+ u8 test_mode;
+ u8 test_mode_nr;
+ u8 lpm_nyet_threshold;
+ u8 hird_threshold;
+ u8 rx_thr_num_pkt;
+ u8 rx_max_burst;
+ u8 tx_thr_num_pkt;
+ u8 tx_max_burst;
+ u8 rx_thr_num_pkt_prd;
+ u8 rx_max_burst_prd;
+ u8 tx_thr_num_pkt_prd;
+ u8 tx_max_burst_prd;
+ u8 tx_fifo_resize_max_num;
+ u8 clear_stall_protocol;
+
+ const char *hsphy_interface;
+
+ unsigned connected:1;
+ unsigned softconnect:1;
+ unsigned delayed_status:1;
+ unsigned ep0_bounced:1;
+ unsigned ep0_expect_in:1;
+ unsigned has_hibernation:1;
+ unsigned sysdev_is_parent:1;
+ unsigned has_lpm_erratum:1;
+ unsigned is_utmi_l1_suspend:1;
+ unsigned is_fpga:1;
+ unsigned pending_events:1;
+ unsigned do_fifo_resize:1;
+ unsigned pullups_connected:1;
+ unsigned setup_packet_pending:1;
+ unsigned three_stage_setup:1;
+ unsigned dis_start_transfer_quirk:1;
+ unsigned usb3_lpm_capable:1;
+ unsigned usb2_lpm_disable:1;
+ unsigned usb2_gadget_lpm_disable:1;
+
+ unsigned disable_scramble_quirk:1;
+ unsigned u2exit_lfps_quirk:1;
+ unsigned u2ss_inp3_quirk:1;
+ unsigned req_p1p2p3_quirk:1;
+ unsigned del_p1p2p3_quirk:1;
+ unsigned del_phy_power_chg_quirk:1;
+ unsigned lfps_filter_quirk:1;
+ unsigned rx_detect_poll_quirk:1;
+ unsigned dis_u3_susphy_quirk:1;
+ unsigned dis_u2_susphy_quirk:1;
+ unsigned dis_enblslpm_quirk:1;
+ unsigned dis_u1_entry_quirk:1;
+ unsigned dis_u2_entry_quirk:1;
+ unsigned dis_rxdet_inp3_quirk:1;
+ unsigned dis_u2_freeclk_exists_quirk:1;
+ unsigned dis_del_phy_power_chg_quirk:1;
+ unsigned dis_tx_ipgap_linecheck_quirk:1;
+ unsigned resume_hs_terminations:1;
+ unsigned parkmode_disable_ss_quirk:1;
+ unsigned gfladj_refclk_lpm_sel:1;
+
+ unsigned tx_de_emphasis_quirk:1;
+ unsigned tx_de_emphasis:2;
+
+ unsigned dis_metastability_quirk:1;
+
+ unsigned dis_split_quirk:1;
+ unsigned async_callbacks:1;
+ unsigned suspended:1;
+
+ u16 imod_interval;
+
+ int max_cfg_eps;
+ int last_fifo_depth;
+ int num_ep_resized;
+ struct dentry *debug_root;
+};
+
+#define INCRX_BURST_MODE 0
+#define INCRX_UNDEF_LENGTH_BURST_MODE 1
+
+#define work_to_dwc(w) (container_of((w), struct dwc3, drd_work))
+
+/* -------------------------------------------------------------------------- */
+
+struct dwc3_event_type {
+ u32 is_devspec:1;
+ u32 type:7;
+ u32 reserved8_31:24;
+} __packed;
+
+#define DWC3_DEPEVT_XFERCOMPLETE 0x01
+#define DWC3_DEPEVT_XFERINPROGRESS 0x02
+#define DWC3_DEPEVT_XFERNOTREADY 0x03
+#define DWC3_DEPEVT_RXTXFIFOEVT 0x04
+#define DWC3_DEPEVT_STREAMEVT 0x06
+#define DWC3_DEPEVT_EPCMDCMPLT 0x07
+
+/**
+ * struct dwc3_event_depevt - Device Endpoint Events
+ * @one_bit: indicates this is an endpoint event (not used)
+ * @endpoint_number: number of the endpoint
+ * @endpoint_event: The event we have:
+ * 0x00 - Reserved
+ * 0x01 - XferComplete
+ * 0x02 - XferInProgress
+ * 0x03 - XferNotReady
+ * 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun)
+ * 0x05 - Reserved
+ * 0x06 - StreamEvt
+ * 0x07 - EPCmdCmplt
+ * @reserved11_10: Reserved, don't use.
+ * @status: Indicates the status of the event. Refer to databook for
+ * more information.
+ * @parameters: Parameters of the current event. Refer to databook for
+ * more information.
+ */
+struct dwc3_event_depevt {
+ u32 one_bit:1;
+ u32 endpoint_number:5;
+ u32 endpoint_event:4;
+ u32 reserved11_10:2;
+ u32 status:4;
+
+/* Within XferNotReady */
+#define DEPEVT_STATUS_TRANSFER_ACTIVE BIT(3)
+
+/* Within XferComplete or XferInProgress */
+#define DEPEVT_STATUS_BUSERR BIT(0)
+#define DEPEVT_STATUS_SHORT BIT(1)
+#define DEPEVT_STATUS_IOC BIT(2)
+#define DEPEVT_STATUS_LST BIT(3) /* XferComplete */
+#define DEPEVT_STATUS_MISSED_ISOC BIT(3) /* XferInProgress */
+
+/* Stream event only */
+#define DEPEVT_STREAMEVT_FOUND 1
+#define DEPEVT_STREAMEVT_NOTFOUND 2
+
+/* Stream event parameter */
+#define DEPEVT_STREAM_PRIME 0xfffe
+#define DEPEVT_STREAM_NOSTREAM 0x0
+
+/* Control-only Status */
+#define DEPEVT_STATUS_CONTROL_DATA 1
+#define DEPEVT_STATUS_CONTROL_STATUS 2
+#define DEPEVT_STATUS_CONTROL_PHASE(n) ((n) & 3)
+
+/* In response to Start Transfer */
+#define DEPEVT_TRANSFER_NO_RESOURCE 1
+#define DEPEVT_TRANSFER_BUS_EXPIRY 2
+
+ u32 parameters:16;
+
+/* For Command Complete Events */
+#define DEPEVT_PARAMETER_CMD(n) (((n) & (0xf << 8)) >> 8)
+} __packed;
+
+/**
+ * struct dwc3_event_devt - Device Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's a device event. Should read as 0x00
+ * @type: indicates the type of device event.
+ * 0 - DisconnEvt
+ * 1 - USBRst
+ * 2 - ConnectDone
+ * 3 - ULStChng
+ * 4 - WkUpEvt
+ * 5 - Reserved
+ * 6 - Suspend (EOPF on revisions 2.10a and prior)
+ * 7 - SOF
+ * 8 - Reserved
+ * 9 - ErrticErr
+ * 10 - CmdCmplt
+ * 11 - EvntOverflow
+ * 12 - VndrDevTstRcved
+ * @reserved15_12: Reserved, not used
+ * @event_info: Information about this event
+ * @reserved31_25: Reserved, not used
+ */
+struct dwc3_event_devt {
+ u32 one_bit:1;
+ u32 device_event:7;
+ u32 type:4;
+ u32 reserved15_12:4;
+ u32 event_info:9;
+ u32 reserved31_25:7;
+} __packed;
+
+/**
+ * struct dwc3_event_gevt - Other Core Events
+ * @one_bit: indicates this is a non-endpoint event (not used)
+ * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event.
+ * @phy_port_number: self-explanatory
+ * @reserved31_12: Reserved, not used.
+ */
+struct dwc3_event_gevt {
+ u32 one_bit:1;
+ u32 device_event:7;
+ u32 phy_port_number:4;
+ u32 reserved31_12:20;
+} __packed;
+
+/**
+ * union dwc3_event - representation of Event Buffer contents
+ * @raw: raw 32-bit event
+ * @type: the type of the event
+ * @depevt: Device Endpoint Event
+ * @devt: Device Event
+ * @gevt: Global Event
+ */
+union dwc3_event {
+ u32 raw;
+ struct dwc3_event_type type;
+ struct dwc3_event_depevt depevt;
+ struct dwc3_event_devt devt;
+ struct dwc3_event_gevt gevt;
+};
+
+/**
+ * struct dwc3_gadget_ep_cmd_params - representation of endpoint command
+ * parameters
+ * @param2: third parameter
+ * @param1: second parameter
+ * @param0: first parameter
+ */
+struct dwc3_gadget_ep_cmd_params {
+ u32 param2;
+ u32 param1;
+ u32 param0;
+};
+
+/*
+ * DWC3 Features to be used as Driver Data
+ */
+
+#define DWC3_HAS_PERIPHERAL BIT(0)
+#define DWC3_HAS_XHCI BIT(1)
+#define DWC3_HAS_OTG BIT(3)
+
+/* prototypes */
+void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode);
+void dwc3_set_mode(struct dwc3 *dwc, u32 mode);
+u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type);
+
+#define DWC3_IP_IS(_ip) \
+ (dwc->ip == _ip##_IP)
+
+#define DWC3_VER_IS(_ip, _ver) \
+ (DWC3_IP_IS(_ip) && dwc->revision == _ip##_REVISION_##_ver)
+
+#define DWC3_VER_IS_PRIOR(_ip, _ver) \
+ (DWC3_IP_IS(_ip) && dwc->revision < _ip##_REVISION_##_ver)
+
+#define DWC3_VER_IS_WITHIN(_ip, _from, _to) \
+ (DWC3_IP_IS(_ip) && \
+ dwc->revision >= _ip##_REVISION_##_from && \
+ (!(_ip##_REVISION_##_to) || \
+ dwc->revision <= _ip##_REVISION_##_to))
+
+#define DWC3_VER_TYPE_IS_WITHIN(_ip, _ver, _from, _to) \
+ (DWC3_VER_IS(_ip, _ver) && \
+ dwc->version_type >= _ip##_VERSIONTYPE_##_from && \
+ (!(_ip##_VERSIONTYPE_##_to) || \
+ dwc->version_type <= _ip##_VERSIONTYPE_##_to))
+
+/**
+ * dwc3_mdwidth - get MDWIDTH value in bits
+ * @dwc: pointer to our context structure
+ *
+ * Return MDWIDTH configuration value in bits.
+ */
+static inline u32 dwc3_mdwidth(struct dwc3 *dwc)
+{
+ u32 mdwidth;
+
+ mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0);
+ if (DWC3_IP_IS(DWC32))
+ mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6);
+
+ return mdwidth;
+}
+
+bool dwc3_has_imod(struct dwc3 *dwc);
+
+int dwc3_event_buffers_setup(struct dwc3 *dwc);
+void dwc3_event_buffers_cleanup(struct dwc3 *dwc);
+
+int dwc3_core_soft_reset(struct dwc3 *dwc);
+
+#if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_host_init(struct dwc3 *dwc);
+void dwc3_host_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_host_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_host_exit(struct dwc3 *dwc)
+{ }
+#endif
+
+#if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_gadget_init(struct dwc3 *dwc);
+void dwc3_gadget_exit(struct dwc3 *dwc);
+int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
+int dwc3_gadget_get_link_state(struct dwc3 *dwc);
+int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
+ struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
+ u32 param);
+void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc);
+void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status);
+#else
+static inline int dwc3_gadget_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_gadget_exit(struct dwc3 *dwc)
+{ }
+static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
+{ return 0; }
+static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc)
+{ return 0; }
+static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
+ enum dwc3_link_state state)
+{ return 0; }
+
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
+ struct dwc3_gadget_ep_cmd_params *params)
+{ return 0; }
+static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
+ int cmd, u32 param)
+{ return 0; }
+static inline void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
+{ }
+#endif
+
+#if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
+int dwc3_drd_init(struct dwc3 *dwc);
+void dwc3_drd_exit(struct dwc3 *dwc);
+void dwc3_otg_init(struct dwc3 *dwc);
+void dwc3_otg_exit(struct dwc3 *dwc);
+void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus);
+void dwc3_otg_host_init(struct dwc3 *dwc);
+#else
+static inline int dwc3_drd_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_drd_exit(struct dwc3 *dwc)
+{ }
+static inline void dwc3_otg_init(struct dwc3 *dwc)
+{ }
+static inline void dwc3_otg_exit(struct dwc3 *dwc)
+{ }
+static inline void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus)
+{ }
+static inline void dwc3_otg_host_init(struct dwc3 *dwc)
+{ }
+#endif
+
+/* power management interface */
+#if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
+int dwc3_gadget_suspend(struct dwc3 *dwc);
+int dwc3_gadget_resume(struct dwc3 *dwc);
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
+#else
+static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
+{
+ return 0;
+}
+
+static inline int dwc3_gadget_resume(struct dwc3 *dwc)
+{
+ return 0;
+}
+
+static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+}
+#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
+
+#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
+int dwc3_ulpi_init(struct dwc3 *dwc);
+void dwc3_ulpi_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_ulpi_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
+{ }
+#endif
+
+#endif /* __DRIVERS_USB_DWC3_CORE_H */