diff options
Diffstat (limited to 'drivers/usb/gadget/function/u_serial.c')
| -rw-r--r-- | drivers/usb/gadget/function/u_serial.c | 1534 |
1 files changed, 1534 insertions, 0 deletions
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c new file mode 100644 index 000000000..3c51355cc --- /dev/null +++ b/drivers/usb/gadget/function/u_serial.c @@ -0,0 +1,1534 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * u_serial.c - utilities for USB gadget "serial port"/TTY support + * + * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com) + * Copyright (C) 2008 David Brownell + * Copyright (C) 2008 by Nokia Corporation + * + * This code also borrows from usbserial.c, which is + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2000 Peter Berger (pberger@brimson.com) + * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com) + */ + +/* #define VERBOSE_DEBUG */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/console.h> +#include <linux/kthread.h> +#include <linux/workqueue.h> +#include <linux/kfifo.h> + +#include "u_serial.h" + + +/* + * This component encapsulates the TTY layer glue needed to provide basic + * "serial port" functionality through the USB gadget stack. Each such + * port is exposed through a /dev/ttyGS* node. + * + * After this module has been loaded, the individual TTY port can be requested + * (gserial_alloc_line()) and it will stay available until they are removed + * (gserial_free_line()). Each one may be connected to a USB function + * (gserial_connect), or disconnected (with gserial_disconnect) when the USB + * host issues a config change event. Data can only flow when the port is + * connected to the host. + * + * A given TTY port can be made available in multiple configurations. + * For example, each one might expose a ttyGS0 node which provides a + * login application. In one case that might use CDC ACM interface 0, + * while another configuration might use interface 3 for that. The + * work to handle that (including descriptor management) is not part + * of this component. + * + * Configurations may expose more than one TTY port. For example, if + * ttyGS0 provides login service, then ttyGS1 might provide dialer access + * for a telephone or fax link. And ttyGS2 might be something that just + * needs a simple byte stream interface for some messaging protocol that + * is managed in userspace ... OBEX, PTP, and MTP have been mentioned. + * + * + * gserial is the lifecycle interface, used by USB functions + * gs_port is the I/O nexus, used by the tty driver + * tty_struct links to the tty/filesystem framework + * + * gserial <---> gs_port ... links will be null when the USB link is + * inactive; managed by gserial_{connect,disconnect}(). each gserial + * instance can wrap its own USB control protocol. + * gserial->ioport == usb_ep->driver_data ... gs_port + * gs_port->port_usb ... gserial + * + * gs_port <---> tty_struct ... links will be null when the TTY file + * isn't opened; managed by gs_open()/gs_close() + * gserial->port_tty ... tty_struct + * tty_struct->driver_data ... gserial + */ + +/* RX and TX queues can buffer QUEUE_SIZE packets before they hit the + * next layer of buffering. For TX that's a circular buffer; for RX + * consider it a NOP. A third layer is provided by the TTY code. + */ +#define QUEUE_SIZE 16 +#define WRITE_BUF_SIZE 8192 /* TX only */ +#define GS_CONSOLE_BUF_SIZE 8192 + +/* Prevents race conditions while accessing gser->ioport */ +static DEFINE_SPINLOCK(serial_port_lock); + +/* console info */ +struct gs_console { + struct console console; + struct work_struct work; + spinlock_t lock; + struct usb_request *req; + struct kfifo buf; + size_t missed; +}; + +/* + * The port structure holds info for each port, one for each minor number + * (and thus for each /dev/ node). + */ +struct gs_port { + struct tty_port port; + spinlock_t port_lock; /* guard port_* access */ + + struct gserial *port_usb; +#ifdef CONFIG_U_SERIAL_CONSOLE + struct gs_console *console; +#endif + + u8 port_num; + + struct list_head read_pool; + int read_started; + int read_allocated; + struct list_head read_queue; + unsigned n_read; + struct delayed_work push; + + struct list_head write_pool; + int write_started; + int write_allocated; + struct kfifo port_write_buf; + wait_queue_head_t drain_wait; /* wait while writes drain */ + bool write_busy; + wait_queue_head_t close_wait; + bool suspended; /* port suspended */ + bool start_delayed; /* delay start when suspended */ + + /* REVISIT this state ... */ + struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ +}; + +static struct portmaster { + struct mutex lock; /* protect open/close */ + struct gs_port *port; +} ports[MAX_U_SERIAL_PORTS]; + +#define GS_CLOSE_TIMEOUT 15 /* seconds */ + + + +#ifdef VERBOSE_DEBUG +#ifndef pr_vdebug +#define pr_vdebug(fmt, arg...) \ + pr_debug(fmt, ##arg) +#endif /* pr_vdebug */ +#else +#ifndef pr_vdebug +#define pr_vdebug(fmt, arg...) \ + ({ if (0) pr_debug(fmt, ##arg); }) +#endif /* pr_vdebug */ +#endif + +/*-------------------------------------------------------------------------*/ + +/* I/O glue between TTY (upper) and USB function (lower) driver layers */ + +/* + * gs_alloc_req + * + * Allocate a usb_request and its buffer. Returns a pointer to the + * usb_request or NULL if there is an error. + */ +struct usb_request * +gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags) +{ + struct usb_request *req; + + req = usb_ep_alloc_request(ep, kmalloc_flags); + + if (req != NULL) { + req->length = len; + req->buf = kmalloc(len, kmalloc_flags); + if (req->buf == NULL) { + usb_ep_free_request(ep, req); + return NULL; + } + } + + return req; +} +EXPORT_SYMBOL_GPL(gs_alloc_req); + +/* + * gs_free_req + * + * Free a usb_request and its buffer. + */ +void gs_free_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +} +EXPORT_SYMBOL_GPL(gs_free_req); + +/* + * gs_send_packet + * + * If there is data to send, a packet is built in the given + * buffer and the size is returned. If there is no data to + * send, 0 is returned. + * + * Called with port_lock held. + */ +static unsigned +gs_send_packet(struct gs_port *port, char *packet, unsigned size) +{ + unsigned len; + + len = kfifo_len(&port->port_write_buf); + if (len < size) + size = len; + if (size != 0) + size = kfifo_out(&port->port_write_buf, packet, size); + return size; +} + +/* + * gs_start_tx + * + * This function finds available write requests, calls + * gs_send_packet to fill these packets with data, and + * continues until either there are no more write requests + * available or no more data to send. This function is + * run whenever data arrives or write requests are available. + * + * Context: caller owns port_lock; port_usb is non-null. + */ +static int gs_start_tx(struct gs_port *port) +/* +__releases(&port->port_lock) +__acquires(&port->port_lock) +*/ +{ + struct list_head *pool = &port->write_pool; + struct usb_ep *in; + int status = 0; + bool do_tty_wake = false; + + if (!port->port_usb) + return status; + + in = port->port_usb->in; + + while (!port->write_busy && !list_empty(pool)) { + struct usb_request *req; + int len; + + if (port->write_started >= QUEUE_SIZE) + break; + + req = list_entry(pool->next, struct usb_request, list); + len = gs_send_packet(port, req->buf, in->maxpacket); + if (len == 0) { + wake_up_interruptible(&port->drain_wait); + break; + } + do_tty_wake = true; + + req->length = len; + list_del(&req->list); + req->zero = kfifo_is_empty(&port->port_write_buf); + + pr_vdebug("ttyGS%d: tx len=%d, %3ph ...\n", port->port_num, len, req->buf); + + /* Drop lock while we call out of driver; completions + * could be issued while we do so. Disconnection may + * happen too; maybe immediately before we queue this! + * + * NOTE that we may keep sending data for a while after + * the TTY closed (dev->ioport->port_tty is NULL). + */ + port->write_busy = true; + spin_unlock(&port->port_lock); + status = usb_ep_queue(in, req, GFP_ATOMIC); + spin_lock(&port->port_lock); + port->write_busy = false; + + if (status) { + pr_debug("%s: %s %s err %d\n", + __func__, "queue", in->name, status); + list_add(&req->list, pool); + break; + } + + port->write_started++; + + /* abort immediately after disconnect */ + if (!port->port_usb) + break; + } + + if (do_tty_wake && port->port.tty) + tty_wakeup(port->port.tty); + return status; +} + +/* + * Context: caller owns port_lock, and port_usb is set + */ +static unsigned gs_start_rx(struct gs_port *port) +/* +__releases(&port->port_lock) +__acquires(&port->port_lock) +*/ +{ + struct list_head *pool = &port->read_pool; + struct usb_ep *out = port->port_usb->out; + + while (!list_empty(pool)) { + struct usb_request *req; + int status; + struct tty_struct *tty; + + /* no more rx if closed */ + tty = port->port.tty; + if (!tty) + break; + + if (port->read_started >= QUEUE_SIZE) + break; + + req = list_entry(pool->next, struct usb_request, list); + list_del(&req->list); + req->length = out->maxpacket; + + /* drop lock while we call out; the controller driver + * may need to call us back (e.g. for disconnect) + */ + spin_unlock(&port->port_lock); + status = usb_ep_queue(out, req, GFP_ATOMIC); + spin_lock(&port->port_lock); + + if (status) { + pr_debug("%s: %s %s err %d\n", + __func__, "queue", out->name, status); + list_add(&req->list, pool); + break; + } + port->read_started++; + + /* abort immediately after disconnect */ + if (!port->port_usb) + break; + } + return port->read_started; +} + +/* + * RX work takes data out of the RX queue and hands it up to the TTY + * layer until it refuses to take any more data (or is throttled back). + * Then it issues reads for any further data. + * + * If the RX queue becomes full enough that no usb_request is queued, + * the OUT endpoint may begin NAKing as soon as its FIFO fills up. + * So QUEUE_SIZE packets plus however many the FIFO holds (usually two) + * can be buffered before the TTY layer's buffers (currently 64 KB). + */ +static void gs_rx_push(struct work_struct *work) +{ + struct delayed_work *w = to_delayed_work(work); + struct gs_port *port = container_of(w, struct gs_port, push); + struct tty_struct *tty; + struct list_head *queue = &port->read_queue; + bool disconnect = false; + bool do_push = false; + + /* hand any queued data to the tty */ + spin_lock_irq(&port->port_lock); + tty = port->port.tty; + while (!list_empty(queue)) { + struct usb_request *req; + + req = list_first_entry(queue, struct usb_request, list); + + /* leave data queued if tty was rx throttled */ + if (tty && tty_throttled(tty)) + break; + + switch (req->status) { + case -ESHUTDOWN: + disconnect = true; + pr_vdebug("ttyGS%d: shutdown\n", port->port_num); + break; + + default: + /* presumably a transient fault */ + pr_warn("ttyGS%d: unexpected RX status %d\n", + port->port_num, req->status); + fallthrough; + case 0: + /* normal completion */ + break; + } + + /* push data to (open) tty */ + if (req->actual && tty) { + char *packet = req->buf; + unsigned size = req->actual; + unsigned n; + int count; + + /* we may have pushed part of this packet already... */ + n = port->n_read; + if (n) { + packet += n; + size -= n; + } + + count = tty_insert_flip_string(&port->port, packet, + size); + if (count) + do_push = true; + if (count != size) { + /* stop pushing; TTY layer can't handle more */ + port->n_read += count; + pr_vdebug("ttyGS%d: rx block %d/%d\n", + port->port_num, count, req->actual); + break; + } + port->n_read = 0; + } + + list_move(&req->list, &port->read_pool); + port->read_started--; + } + + /* Push from tty to ldisc; this is handled by a workqueue, + * so we won't get callbacks and can hold port_lock + */ + if (do_push) + tty_flip_buffer_push(&port->port); + + + /* We want our data queue to become empty ASAP, keeping data + * in the tty and ldisc (not here). If we couldn't push any + * this time around, RX may be starved, so wait until next jiffy. + * + * We may leave non-empty queue only when there is a tty, and + * either it is throttled or there is no more room in flip buffer. + */ + if (!list_empty(queue) && !tty_throttled(tty)) + schedule_delayed_work(&port->push, 1); + + /* If we're still connected, refill the USB RX queue. */ + if (!disconnect && port->port_usb) + gs_start_rx(port); + + spin_unlock_irq(&port->port_lock); +} + +static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_port *port = ep->driver_data; + + /* Queue all received data until the tty layer is ready for it. */ + spin_lock(&port->port_lock); + list_add_tail(&req->list, &port->read_queue); + schedule_delayed_work(&port->push, 0); + spin_unlock(&port->port_lock); +} + +static void gs_write_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_port *port = ep->driver_data; + + spin_lock(&port->port_lock); + list_add(&req->list, &port->write_pool); + port->write_started--; + + switch (req->status) { + default: + /* presumably a transient fault */ + pr_warn("%s: unexpected %s status %d\n", + __func__, ep->name, req->status); + fallthrough; + case 0: + /* normal completion */ + gs_start_tx(port); + break; + + case -ESHUTDOWN: + /* disconnect */ + pr_vdebug("%s: %s shutdown\n", __func__, ep->name); + break; + } + + spin_unlock(&port->port_lock); +} + +static void gs_free_requests(struct usb_ep *ep, struct list_head *head, + int *allocated) +{ + struct usb_request *req; + + while (!list_empty(head)) { + req = list_entry(head->next, struct usb_request, list); + list_del(&req->list); + gs_free_req(ep, req); + if (allocated) + (*allocated)--; + } +} + +static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head, + void (*fn)(struct usb_ep *, struct usb_request *), + int *allocated) +{ + int i; + struct usb_request *req; + int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE; + + /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't + * do quite that many this time, don't fail ... we just won't + * be as speedy as we might otherwise be. + */ + for (i = 0; i < n; i++) { + req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); + if (!req) + return list_empty(head) ? -ENOMEM : 0; + req->complete = fn; + list_add_tail(&req->list, head); + if (allocated) + (*allocated)++; + } + return 0; +} + +/** + * gs_start_io - start USB I/O streams + * @port: port to use + * Context: holding port_lock; port_tty and port_usb are non-null + * + * We only start I/O when something is connected to both sides of + * this port. If nothing is listening on the host side, we may + * be pointlessly filling up our TX buffers and FIFO. + */ +static int gs_start_io(struct gs_port *port) +{ + struct list_head *head = &port->read_pool; + struct usb_ep *ep = port->port_usb->out; + int status; + unsigned started; + + /* Allocate RX and TX I/O buffers. We can't easily do this much + * earlier (with GFP_KERNEL) because the requests are coupled to + * endpoints, as are the packet sizes we'll be using. Different + * configurations may use different endpoints with a given port; + * and high speed vs full speed changes packet sizes too. + */ + status = gs_alloc_requests(ep, head, gs_read_complete, + &port->read_allocated); + if (status) + return status; + + status = gs_alloc_requests(port->port_usb->in, &port->write_pool, + gs_write_complete, &port->write_allocated); + if (status) { + gs_free_requests(ep, head, &port->read_allocated); + return status; + } + + /* queue read requests */ + port->n_read = 0; + started = gs_start_rx(port); + + if (started) { + gs_start_tx(port); + /* Unblock any pending writes into our circular buffer, in case + * we didn't in gs_start_tx() */ + tty_wakeup(port->port.tty); + } else { + gs_free_requests(ep, head, &port->read_allocated); + gs_free_requests(port->port_usb->in, &port->write_pool, + &port->write_allocated); + status = -EIO; + } + + return status; +} + +/*-------------------------------------------------------------------------*/ + +/* TTY Driver */ + +/* + * gs_open sets up the link between a gs_port and its associated TTY. + * That link is broken *only* by TTY close(), and all driver methods + * know that. + */ +static int gs_open(struct tty_struct *tty, struct file *file) +{ + int port_num = tty->index; + struct gs_port *port; + int status = 0; + + mutex_lock(&ports[port_num].lock); + port = ports[port_num].port; + if (!port) { + status = -ENODEV; + goto out; + } + + spin_lock_irq(&port->port_lock); + + /* allocate circular buffer on first open */ + if (!kfifo_initialized(&port->port_write_buf)) { + + spin_unlock_irq(&port->port_lock); + + /* + * portmaster's mutex still protects from simultaneous open(), + * and close() can't happen, yet. + */ + + status = kfifo_alloc(&port->port_write_buf, + WRITE_BUF_SIZE, GFP_KERNEL); + if (status) { + pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n", + port_num, tty, file); + goto out; + } + + spin_lock_irq(&port->port_lock); + } + + /* already open? Great. */ + if (port->port.count++) + goto exit_unlock_port; + + tty->driver_data = port; + port->port.tty = tty; + + /* if connected, start the I/O stream */ + if (port->port_usb) { + /* if port is suspended, wait resume to start I/0 stream */ + if (!port->suspended) { + struct gserial *gser = port->port_usb; + + pr_debug("gs_open: start ttyGS%d\n", port->port_num); + gs_start_io(port); + + if (gser->connect) + gser->connect(gser); + } else { + pr_debug("delay start of ttyGS%d\n", port->port_num); + port->start_delayed = true; + } + } + + pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file); + +exit_unlock_port: + spin_unlock_irq(&port->port_lock); +out: + mutex_unlock(&ports[port_num].lock); + return status; +} + +static int gs_close_flush_done(struct gs_port *p) +{ + int cond; + + /* return true on disconnect or empty buffer or if raced with open() */ + spin_lock_irq(&p->port_lock); + cond = p->port_usb == NULL || !kfifo_len(&p->port_write_buf) || + p->port.count > 1; + spin_unlock_irq(&p->port_lock); + + return cond; +} + +static void gs_close(struct tty_struct *tty, struct file *file) +{ + struct gs_port *port = tty->driver_data; + struct gserial *gser; + + spin_lock_irq(&port->port_lock); + + if (port->port.count != 1) { +raced_with_open: + if (port->port.count == 0) + WARN_ON(1); + else + --port->port.count; + goto exit; + } + + pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file); + + gser = port->port_usb; + if (gser && !port->suspended && gser->disconnect) + gser->disconnect(gser); + + /* wait for circular write buffer to drain, disconnect, or at + * most GS_CLOSE_TIMEOUT seconds; then discard the rest + */ + if (kfifo_len(&port->port_write_buf) > 0 && gser) { + spin_unlock_irq(&port->port_lock); + wait_event_interruptible_timeout(port->drain_wait, + gs_close_flush_done(port), + GS_CLOSE_TIMEOUT * HZ); + spin_lock_irq(&port->port_lock); + + if (port->port.count != 1) + goto raced_with_open; + + gser = port->port_usb; + } + + /* Iff we're disconnected, there can be no I/O in flight so it's + * ok to free the circular buffer; else just scrub it. And don't + * let the push async work fire again until we're re-opened. + */ + if (gser == NULL) + kfifo_free(&port->port_write_buf); + else + kfifo_reset(&port->port_write_buf); + + port->start_delayed = false; + port->port.count = 0; + port->port.tty = NULL; + + pr_debug("gs_close: ttyGS%d (%p,%p) done!\n", + port->port_num, tty, file); + + wake_up(&port->close_wait); +exit: + spin_unlock_irq(&port->port_lock); +} + +static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + + pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n", + port->port_num, tty, count); + + spin_lock_irqsave(&port->port_lock, flags); + if (count) + count = kfifo_in(&port->port_write_buf, buf, count); + /* treat count == 0 as flush_chars() */ + if (port->port_usb) + gs_start_tx(port); + spin_unlock_irqrestore(&port->port_lock, flags); + + return count; +} + +static int gs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + int status; + + pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n", + port->port_num, tty, ch, __builtin_return_address(0)); + + spin_lock_irqsave(&port->port_lock, flags); + status = kfifo_put(&port->port_write_buf, ch); + spin_unlock_irqrestore(&port->port_lock, flags); + + return status; +} + +static void gs_flush_chars(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + + pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty); + + spin_lock_irqsave(&port->port_lock, flags); + if (port->port_usb) + gs_start_tx(port); + spin_unlock_irqrestore(&port->port_lock, flags); +} + +static unsigned int gs_write_room(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + unsigned int room = 0; + + spin_lock_irqsave(&port->port_lock, flags); + if (port->port_usb) + room = kfifo_avail(&port->port_write_buf); + spin_unlock_irqrestore(&port->port_lock, flags); + + pr_vdebug("gs_write_room: (%d,%p) room=%u\n", + port->port_num, tty, room); + + return room; +} + +static unsigned int gs_chars_in_buffer(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + unsigned int chars; + + spin_lock_irqsave(&port->port_lock, flags); + chars = kfifo_len(&port->port_write_buf); + spin_unlock_irqrestore(&port->port_lock, flags); + + pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%u\n", + port->port_num, tty, chars); + + return chars; +} + +/* undo side effects of setting TTY_THROTTLED */ +static void gs_unthrottle(struct tty_struct *tty) +{ + struct gs_port *port = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&port->port_lock, flags); + if (port->port_usb) { + /* Kickstart read queue processing. We don't do xon/xoff, + * rts/cts, or other handshaking with the host, but if the + * read queue backs up enough we'll be NAKing OUT packets. + */ + pr_vdebug("ttyGS%d: unthrottle\n", port->port_num); + schedule_delayed_work(&port->push, 0); + } + spin_unlock_irqrestore(&port->port_lock, flags); +} + +static int gs_break_ctl(struct tty_struct *tty, int duration) +{ + struct gs_port *port = tty->driver_data; + int status = 0; + struct gserial *gser; + + pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n", + port->port_num, duration); + + spin_lock_irq(&port->port_lock); + gser = port->port_usb; + if (gser && gser->send_break) + status = gser->send_break(gser, duration); + spin_unlock_irq(&port->port_lock); + + return status; +} + +static const struct tty_operations gs_tty_ops = { + .open = gs_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .unthrottle = gs_unthrottle, + .break_ctl = gs_break_ctl, +}; + +/*-------------------------------------------------------------------------*/ + +static struct tty_driver *gs_tty_driver; + +#ifdef CONFIG_U_SERIAL_CONSOLE + +static void gs_console_complete_out(struct usb_ep *ep, struct usb_request *req) +{ + struct gs_console *cons = req->context; + + switch (req->status) { + default: + pr_warn("%s: unexpected %s status %d\n", + __func__, ep->name, req->status); + fallthrough; + case 0: + /* normal completion */ + spin_lock(&cons->lock); + req->length = 0; + schedule_work(&cons->work); + spin_unlock(&cons->lock); + break; + case -ECONNRESET: + case -ESHUTDOWN: + /* disconnect */ + pr_vdebug("%s: %s shutdown\n", __func__, ep->name); + break; + } +} + +static void __gs_console_push(struct gs_console *cons) +{ + struct usb_request *req = cons->req; + struct usb_ep *ep; + size_t size; + + if (!req) + return; /* disconnected */ + + if (req->length) + return; /* busy */ + + ep = cons->console.data; + size = kfifo_out(&cons->buf, req->buf, ep->maxpacket); + if (!size) + return; + + if (cons->missed && ep->maxpacket >= 64) { + char buf[64]; + size_t len; + + len = sprintf(buf, "\n[missed %zu bytes]\n", cons->missed); + kfifo_in(&cons->buf, buf, len); + cons->missed = 0; + } + + req->length = size; + + spin_unlock_irq(&cons->lock); + if (usb_ep_queue(ep, req, GFP_ATOMIC)) + req->length = 0; + spin_lock_irq(&cons->lock); +} + +static void gs_console_work(struct work_struct *work) +{ + struct gs_console *cons = container_of(work, struct gs_console, work); + + spin_lock_irq(&cons->lock); + + __gs_console_push(cons); + + spin_unlock_irq(&cons->lock); +} + +static void gs_console_write(struct console *co, + const char *buf, unsigned count) +{ + struct gs_console *cons = container_of(co, struct gs_console, console); + unsigned long flags; + size_t n; + + spin_lock_irqsave(&cons->lock, flags); + + n = kfifo_in(&cons->buf, buf, count); + if (n < count) + cons->missed += count - n; + + if (cons->req && !cons->req->length) + schedule_work(&cons->work); + + spin_unlock_irqrestore(&cons->lock, flags); +} + +static struct tty_driver *gs_console_device(struct console *co, int *index) +{ + *index = co->index; + return gs_tty_driver; +} + +static int gs_console_connect(struct gs_port *port) +{ + struct gs_console *cons = port->console; + struct usb_request *req; + struct usb_ep *ep; + + if (!cons) + return 0; + + ep = port->port_usb->in; + req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC); + if (!req) + return -ENOMEM; + req->complete = gs_console_complete_out; + req->context = cons; + req->length = 0; + + spin_lock(&cons->lock); + cons->req = req; + cons->console.data = ep; + spin_unlock(&cons->lock); + + pr_debug("ttyGS%d: console connected!\n", port->port_num); + + schedule_work(&cons->work); + + return 0; +} + +static void gs_console_disconnect(struct gs_port *port) +{ + struct gs_console *cons = port->console; + struct usb_request *req; + struct usb_ep *ep; + + if (!cons) + return; + + spin_lock(&cons->lock); + + req = cons->req; + ep = cons->console.data; + cons->req = NULL; + + spin_unlock(&cons->lock); + + if (!req) + return; + + usb_ep_dequeue(ep, req); + gs_free_req(ep, req); +} + +static int gs_console_init(struct gs_port *port) +{ + struct gs_console *cons; + int err; + + if (port->console) + return 0; + + cons = kzalloc(sizeof(*port->console), GFP_KERNEL); + if (!cons) + return -ENOMEM; + + strcpy(cons->console.name, "ttyGS"); + cons->console.write = gs_console_write; + cons->console.device = gs_console_device; + cons->console.flags = CON_PRINTBUFFER; + cons->console.index = port->port_num; + + INIT_WORK(&cons->work, gs_console_work); + spin_lock_init(&cons->lock); + + err = kfifo_alloc(&cons->buf, GS_CONSOLE_BUF_SIZE, GFP_KERNEL); + if (err) { + pr_err("ttyGS%d: allocate console buffer failed\n", port->port_num); + kfree(cons); + return err; + } + + port->console = cons; + register_console(&cons->console); + + spin_lock_irq(&port->port_lock); + if (port->port_usb) + gs_console_connect(port); + spin_unlock_irq(&port->port_lock); + + return 0; +} + +static void gs_console_exit(struct gs_port *port) +{ + struct gs_console *cons = port->console; + + if (!cons) + return; + + unregister_console(&cons->console); + + spin_lock_irq(&port->port_lock); + if (cons->req) + gs_console_disconnect(port); + spin_unlock_irq(&port->port_lock); + + cancel_work_sync(&cons->work); + kfifo_free(&cons->buf); + kfree(cons); + port->console = NULL; +} + +ssize_t gserial_set_console(unsigned char port_num, const char *page, size_t count) +{ + struct gs_port *port; + bool enable; + int ret; + + ret = strtobool(page, &enable); + if (ret) + return ret; + + mutex_lock(&ports[port_num].lock); + port = ports[port_num].port; + + if (WARN_ON(port == NULL)) { + ret = -ENXIO; + goto out; + } + + if (enable) + ret = gs_console_init(port); + else + gs_console_exit(port); +out: + mutex_unlock(&ports[port_num].lock); + + return ret < 0 ? ret : count; +} +EXPORT_SYMBOL_GPL(gserial_set_console); + +ssize_t gserial_get_console(unsigned char port_num, char *page) +{ + struct gs_port *port; + ssize_t ret; + + mutex_lock(&ports[port_num].lock); + port = ports[port_num].port; + + if (WARN_ON(port == NULL)) + ret = -ENXIO; + else + ret = sprintf(page, "%u\n", !!port->console); + + mutex_unlock(&ports[port_num].lock); + + return ret; +} +EXPORT_SYMBOL_GPL(gserial_get_console); + +#else + +static int gs_console_connect(struct gs_port *port) +{ + return 0; +} + +static void gs_console_disconnect(struct gs_port *port) +{ +} + +static int gs_console_init(struct gs_port *port) +{ + return -ENOSYS; +} + +static void gs_console_exit(struct gs_port *port) +{ +} + +#endif + +static int +gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding) +{ + struct gs_port *port; + int ret = 0; + + mutex_lock(&ports[port_num].lock); + if (ports[port_num].port) { + ret = -EBUSY; + goto out; + } + + port = kzalloc(sizeof(struct gs_port), GFP_KERNEL); + if (port == NULL) { + ret = -ENOMEM; + goto out; + } + + tty_port_init(&port->port); + spin_lock_init(&port->port_lock); + init_waitqueue_head(&port->drain_wait); + init_waitqueue_head(&port->close_wait); + + INIT_DELAYED_WORK(&port->push, gs_rx_push); + + INIT_LIST_HEAD(&port->read_pool); + INIT_LIST_HEAD(&port->read_queue); + INIT_LIST_HEAD(&port->write_pool); + + port->port_num = port_num; + port->port_line_coding = *coding; + + ports[port_num].port = port; +out: + mutex_unlock(&ports[port_num].lock); + return ret; +} + +static int gs_closed(struct gs_port *port) +{ + int cond; + + spin_lock_irq(&port->port_lock); + cond = port->port.count == 0; + spin_unlock_irq(&port->port_lock); + + return cond; +} + +static void gserial_free_port(struct gs_port *port) +{ + cancel_delayed_work_sync(&port->push); + /* wait for old opens to finish */ + wait_event(port->close_wait, gs_closed(port)); + WARN_ON(port->port_usb != NULL); + tty_port_destroy(&port->port); + kfree(port); +} + +void gserial_free_line(unsigned char port_num) +{ + struct gs_port *port; + + mutex_lock(&ports[port_num].lock); + if (!ports[port_num].port) { + mutex_unlock(&ports[port_num].lock); + return; + } + port = ports[port_num].port; + gs_console_exit(port); + ports[port_num].port = NULL; + mutex_unlock(&ports[port_num].lock); + + gserial_free_port(port); + tty_unregister_device(gs_tty_driver, port_num); +} +EXPORT_SYMBOL_GPL(gserial_free_line); + +int gserial_alloc_line_no_console(unsigned char *line_num) +{ + struct usb_cdc_line_coding coding; + struct gs_port *port; + struct device *tty_dev; + int ret; + int port_num; + + coding.dwDTERate = cpu_to_le32(9600); + coding.bCharFormat = 8; + coding.bParityType = USB_CDC_NO_PARITY; + coding.bDataBits = USB_CDC_1_STOP_BITS; + + for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) { + ret = gs_port_alloc(port_num, &coding); + if (ret == -EBUSY) + continue; + if (ret) + return ret; + break; + } + if (ret) + return ret; + + /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */ + + port = ports[port_num].port; + tty_dev = tty_port_register_device(&port->port, + gs_tty_driver, port_num, NULL); + if (IS_ERR(tty_dev)) { + pr_err("%s: failed to register tty for port %d, err %ld\n", + __func__, port_num, PTR_ERR(tty_dev)); + + ret = PTR_ERR(tty_dev); + mutex_lock(&ports[port_num].lock); + ports[port_num].port = NULL; + mutex_unlock(&ports[port_num].lock); + gserial_free_port(port); + goto err; + } + *line_num = port_num; +err: + return ret; +} +EXPORT_SYMBOL_GPL(gserial_alloc_line_no_console); + +int gserial_alloc_line(unsigned char *line_num) +{ + int ret = gserial_alloc_line_no_console(line_num); + + if (!ret && !*line_num) + gs_console_init(ports[*line_num].port); + + return ret; +} +EXPORT_SYMBOL_GPL(gserial_alloc_line); + +/** + * gserial_connect - notify TTY I/O glue that USB link is active + * @gser: the function, set up with endpoints and descriptors + * @port_num: which port is active + * Context: any (usually from irq) + * + * This is called activate endpoints and let the TTY layer know that + * the connection is active ... not unlike "carrier detect". It won't + * necessarily start I/O queues; unless the TTY is held open by any + * task, there would be no point. However, the endpoints will be + * activated so the USB host can perform I/O, subject to basic USB + * hardware flow control. + * + * Caller needs to have set up the endpoints and USB function in @dev + * before calling this, as well as the appropriate (speed-specific) + * endpoint descriptors, and also have allocate @port_num by calling + * @gserial_alloc_line(). + * + * Returns negative errno or zero. + * On success, ep->driver_data will be overwritten. + */ +int gserial_connect(struct gserial *gser, u8 port_num) +{ + struct gs_port *port; + unsigned long flags; + int status; + + if (port_num >= MAX_U_SERIAL_PORTS) + return -ENXIO; + + port = ports[port_num].port; + if (!port) { + pr_err("serial line %d not allocated.\n", port_num); + return -EINVAL; + } + if (port->port_usb) { + pr_err("serial line %d is in use.\n", port_num); + return -EBUSY; + } + + /* activate the endpoints */ + status = usb_ep_enable(gser->in); + if (status < 0) + return status; + gser->in->driver_data = port; + + status = usb_ep_enable(gser->out); + if (status < 0) + goto fail_out; + gser->out->driver_data = port; + + /* then tell the tty glue that I/O can work */ + spin_lock_irqsave(&port->port_lock, flags); + gser->ioport = port; + port->port_usb = gser; + + /* REVISIT unclear how best to handle this state... + * we don't really couple it with the Linux TTY. + */ + gser->port_line_coding = port->port_line_coding; + + /* REVISIT if waiting on "carrier detect", signal. */ + + /* if it's already open, start I/O ... and notify the serial + * protocol about open/close status (connect/disconnect). + */ + if (port->port.count) { + pr_debug("gserial_connect: start ttyGS%d\n", port->port_num); + gs_start_io(port); + if (gser->connect) + gser->connect(gser); + } else { + if (gser->disconnect) + gser->disconnect(gser); + } + + status = gs_console_connect(port); + spin_unlock_irqrestore(&port->port_lock, flags); + + return status; + +fail_out: + usb_ep_disable(gser->in); + return status; +} +EXPORT_SYMBOL_GPL(gserial_connect); +/** + * gserial_disconnect - notify TTY I/O glue that USB link is inactive + * @gser: the function, on which gserial_connect() was called + * Context: any (usually from irq) + * + * This is called to deactivate endpoints and let the TTY layer know + * that the connection went inactive ... not unlike "hangup". + * + * On return, the state is as if gserial_connect() had never been called; + * there is no active USB I/O on these endpoints. + */ +void gserial_disconnect(struct gserial *gser) +{ + struct gs_port *port = gser->ioport; + unsigned long flags; + + if (!port) + return; + + spin_lock_irqsave(&serial_port_lock, flags); + + /* tell the TTY glue not to do I/O here any more */ + spin_lock(&port->port_lock); + + gs_console_disconnect(port); + + /* REVISIT as above: how best to track this? */ + port->port_line_coding = gser->port_line_coding; + + port->port_usb = NULL; + gser->ioport = NULL; + if (port->port.count > 0) { + wake_up_interruptible(&port->drain_wait); + if (port->port.tty) + tty_hangup(port->port.tty); + } + port->suspended = false; + spin_unlock(&port->port_lock); + spin_unlock_irqrestore(&serial_port_lock, flags); + + /* disable endpoints, aborting down any active I/O */ + usb_ep_disable(gser->out); + usb_ep_disable(gser->in); + + /* finally, free any unused/unusable I/O buffers */ + spin_lock_irqsave(&port->port_lock, flags); + if (port->port.count == 0) + kfifo_free(&port->port_write_buf); + gs_free_requests(gser->out, &port->read_pool, NULL); + gs_free_requests(gser->out, &port->read_queue, NULL); + gs_free_requests(gser->in, &port->write_pool, NULL); + + port->read_allocated = port->read_started = + port->write_allocated = port->write_started = 0; + + spin_unlock_irqrestore(&port->port_lock, flags); +} +EXPORT_SYMBOL_GPL(gserial_disconnect); + +void gserial_suspend(struct gserial *gser) +{ + struct gs_port *port; + unsigned long flags; + + spin_lock_irqsave(&serial_port_lock, flags); + port = gser->ioport; + + if (!port) { + spin_unlock_irqrestore(&serial_port_lock, flags); + return; + } + + spin_lock(&port->port_lock); + spin_unlock(&serial_port_lock); + port->suspended = true; + spin_unlock_irqrestore(&port->port_lock, flags); +} +EXPORT_SYMBOL_GPL(gserial_suspend); + +void gserial_resume(struct gserial *gser) +{ + struct gs_port *port; + unsigned long flags; + + spin_lock_irqsave(&serial_port_lock, flags); + port = gser->ioport; + + if (!port) { + spin_unlock_irqrestore(&serial_port_lock, flags); + return; + } + + spin_lock(&port->port_lock); + spin_unlock(&serial_port_lock); + port->suspended = false; + if (!port->start_delayed) { + spin_unlock_irqrestore(&port->port_lock, flags); + return; + } + + pr_debug("delayed start ttyGS%d\n", port->port_num); + gs_start_io(port); + if (gser->connect) + gser->connect(gser); + port->start_delayed = false; + spin_unlock_irqrestore(&port->port_lock, flags); +} +EXPORT_SYMBOL_GPL(gserial_resume); + +static int __init userial_init(void) +{ + struct tty_driver *driver; + unsigned i; + int status; + + driver = tty_alloc_driver(MAX_U_SERIAL_PORTS, TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV); + if (IS_ERR(driver)) + return PTR_ERR(driver); + + driver->driver_name = "g_serial"; + driver->name = "ttyGS"; + /* uses dynamically assigned dev_t values */ + + driver->type = TTY_DRIVER_TYPE_SERIAL; + driver->subtype = SERIAL_TYPE_NORMAL; + driver->init_termios = tty_std_termios; + + /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on + * MS-Windows. Otherwise, most of these flags shouldn't affect + * anything unless we were to actually hook up to a serial line. + */ + driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + driver->init_termios.c_ispeed = 9600; + driver->init_termios.c_ospeed = 9600; + + tty_set_operations(driver, &gs_tty_ops); + for (i = 0; i < MAX_U_SERIAL_PORTS; i++) + mutex_init(&ports[i].lock); + + /* export the driver ... */ + status = tty_register_driver(driver); + if (status) { + pr_err("%s: cannot register, err %d\n", + __func__, status); + goto fail; + } + + gs_tty_driver = driver; + + pr_debug("%s: registered %d ttyGS* device%s\n", __func__, + MAX_U_SERIAL_PORTS, + (MAX_U_SERIAL_PORTS == 1) ? "" : "s"); + + return status; +fail: + tty_driver_kref_put(driver); + return status; +} +module_init(userial_init); + +static void __exit userial_cleanup(void) +{ + tty_unregister_driver(gs_tty_driver); + tty_driver_kref_put(gs_tty_driver); + gs_tty_driver = NULL; +} +module_exit(userial_cleanup); + +MODULE_LICENSE("GPL"); |