diff options
Diffstat (limited to 'drivers/watchdog/bcm2835_wdt.c')
| -rw-r--r-- | drivers/watchdog/bcm2835_wdt.c | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c new file mode 100644 index 000000000..55c0f7b0e --- /dev/null +++ b/drivers/watchdog/bcm2835_wdt.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Broadcom BCM2835 + * + * "bcm2708_wdog" driver written by Luke Diamand that was obtained from + * branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used + * as a hardware reference for the Broadcom BCM2835 watchdog timer. + * + * Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk> + * + */ + +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/mfd/bcm2835-pm.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/watchdog.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#define PM_RSTC 0x1c +#define PM_RSTS 0x20 +#define PM_WDOG 0x24 + +#define PM_PASSWORD 0x5a000000 + +#define PM_WDOG_TIME_SET 0x000fffff +#define PM_RSTC_WRCFG_CLR 0xffffffcf +#define PM_RSTS_HADWRH_SET 0x00000040 +#define PM_RSTC_WRCFG_SET 0x00000030 +#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 +#define PM_RSTC_RESET 0x00000102 + +/* + * The Raspberry Pi firmware uses the RSTS register to know which partition + * to boot from. The partition value is spread into bits 0, 2, 4, 6, 8, 10. + * Partition 63 is a special partition used by the firmware to indicate halt. + */ +#define PM_RSTS_RASPBERRYPI_HALT 0x555 + +#define SECS_TO_WDOG_TICKS(x) ((x) << 16) +#define WDOG_TICKS_TO_SECS(x) ((x) >> 16) +#define WDOG_TICKS_TO_MSECS(x) ((x) * 1000 >> 16) + +struct bcm2835_wdt { + void __iomem *base; + spinlock_t lock; +}; + +static struct bcm2835_wdt *bcm2835_power_off_wdt; + +static unsigned int heartbeat; +static bool nowayout = WATCHDOG_NOWAYOUT; + +static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt) +{ + uint32_t cur; + + cur = readl(wdt->base + PM_RSTC); + + return !!(cur & PM_RSTC_WRCFG_FULL_RESET); +} + +static int bcm2835_wdt_start(struct watchdog_device *wdog) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + uint32_t cur; + unsigned long flags; + + spin_lock_irqsave(&wdt->lock, flags); + + writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) & + PM_WDOG_TIME_SET), wdt->base + PM_WDOG); + cur = readl_relaxed(wdt->base + PM_RSTC); + writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) | + PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC); + + spin_unlock_irqrestore(&wdt->lock, flags); + + return 0; +} + +static int bcm2835_wdt_stop(struct watchdog_device *wdog) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + + writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC); + return 0; +} + +static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + + uint32_t ret = readl_relaxed(wdt->base + PM_WDOG); + return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET); +} + +static void __bcm2835_restart(struct bcm2835_wdt *wdt) +{ + u32 val; + + /* use a timeout of 10 ticks (~150us) */ + writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG); + val = readl_relaxed(wdt->base + PM_RSTC); + val &= PM_RSTC_WRCFG_CLR; + val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; + writel_relaxed(val, wdt->base + PM_RSTC); + + /* No sleeping, possibly atomic. */ + mdelay(1); +} + +static int bcm2835_restart(struct watchdog_device *wdog, + unsigned long action, void *data) +{ + struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog); + + __bcm2835_restart(wdt); + + return 0; +} + +static const struct watchdog_ops bcm2835_wdt_ops = { + .owner = THIS_MODULE, + .start = bcm2835_wdt_start, + .stop = bcm2835_wdt_stop, + .get_timeleft = bcm2835_wdt_get_timeleft, + .restart = bcm2835_restart, +}; + +static const struct watchdog_info bcm2835_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | + WDIOF_KEEPALIVEPING, + .identity = "Broadcom BCM2835 Watchdog timer", +}; + +static struct watchdog_device bcm2835_wdt_wdd = { + .info = &bcm2835_wdt_info, + .ops = &bcm2835_wdt_ops, + .min_timeout = 1, + .max_hw_heartbeat_ms = WDOG_TICKS_TO_MSECS(PM_WDOG_TIME_SET), + .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), +}; + +/* + * We can't really power off, but if we do the normal reset scheme, and + * indicate to bootcode.bin not to reboot, then most of the chip will be + * powered off. + */ +static void bcm2835_power_off(void) +{ + struct bcm2835_wdt *wdt = bcm2835_power_off_wdt; + u32 val; + + /* + * We set the watchdog hard reset bit here to distinguish this reset + * from the normal (full) reset. bootcode.bin will not reboot after a + * hard reset. + */ + val = readl_relaxed(wdt->base + PM_RSTS); + val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; + writel_relaxed(val, wdt->base + PM_RSTS); + + /* Continue with normal reset mechanism */ + __bcm2835_restart(wdt); +} + +static int bcm2835_wdt_probe(struct platform_device *pdev) +{ + struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct bcm2835_wdt *wdt; + int err; + + wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + spin_lock_init(&wdt->lock); + + wdt->base = pm->base; + + watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt); + watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev); + watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout); + bcm2835_wdt_wdd.parent = dev; + if (bcm2835_wdt_is_running(wdt)) { + /* + * The currently active timeout value (set by the + * bootloader) may be different from the module + * heartbeat parameter or the value in device + * tree. But we just need to set WDOG_HW_RUNNING, + * because then the framework will "immediately" ping + * the device, updating the timeout. + */ + set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status); + } + + watchdog_set_restart_priority(&bcm2835_wdt_wdd, 128); + + watchdog_stop_on_reboot(&bcm2835_wdt_wdd); + err = devm_watchdog_register_device(dev, &bcm2835_wdt_wdd); + if (err) + return err; + + if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) { + if (!pm_power_off) { + pm_power_off = bcm2835_power_off; + bcm2835_power_off_wdt = wdt; + } else { + dev_info(dev, "Poweroff handler already present!\n"); + } + } + + dev_info(dev, "Broadcom BCM2835 watchdog timer"); + return 0; +} + +static int bcm2835_wdt_remove(struct platform_device *pdev) +{ + if (pm_power_off == bcm2835_power_off) + pm_power_off = NULL; + + return 0; +} + +static struct platform_driver bcm2835_wdt_driver = { + .probe = bcm2835_wdt_probe, + .remove = bcm2835_wdt_remove, + .driver = { + .name = "bcm2835-wdt", + }, +}; +module_platform_driver(bcm2835_wdt_driver); + +module_param(heartbeat, uint, 0); +MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds"); + +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +MODULE_ALIAS("platform:bcm2835-wdt"); +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); +MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer"); +MODULE_LICENSE("GPL"); |