diff options
Diffstat (limited to 'include/linux/dmaengine.h')
| -rw-r--r-- | include/linux/dmaengine.h | 1636 |
1 files changed, 1636 insertions, 0 deletions
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h new file mode 100644 index 000000000..c923f4e60 --- /dev/null +++ b/include/linux/dmaengine.h @@ -0,0 +1,1636 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved. + */ +#ifndef LINUX_DMAENGINE_H +#define LINUX_DMAENGINE_H + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/uio.h> +#include <linux/bug.h> +#include <linux/scatterlist.h> +#include <linux/bitmap.h> +#include <linux/types.h> +#include <asm/page.h> + +/** + * typedef dma_cookie_t - an opaque DMA cookie + * + * if dma_cookie_t is >0 it's a DMA request cookie, <0 it's an error code + */ +typedef s32 dma_cookie_t; +#define DMA_MIN_COOKIE 1 + +static inline int dma_submit_error(dma_cookie_t cookie) +{ + return cookie < 0 ? cookie : 0; +} + +/** + * enum dma_status - DMA transaction status + * @DMA_COMPLETE: transaction completed + * @DMA_IN_PROGRESS: transaction not yet processed + * @DMA_PAUSED: transaction is paused + * @DMA_ERROR: transaction failed + */ +enum dma_status { + DMA_COMPLETE, + DMA_IN_PROGRESS, + DMA_PAUSED, + DMA_ERROR, + DMA_OUT_OF_ORDER, +}; + +/** + * enum dma_transaction_type - DMA transaction types/indexes + * + * Note: The DMA_ASYNC_TX capability is not to be set by drivers. It is + * automatically set as dma devices are registered. + */ +enum dma_transaction_type { + DMA_MEMCPY, + DMA_XOR, + DMA_PQ, + DMA_XOR_VAL, + DMA_PQ_VAL, + DMA_MEMSET, + DMA_MEMSET_SG, + DMA_INTERRUPT, + DMA_PRIVATE, + DMA_ASYNC_TX, + DMA_SLAVE, + DMA_CYCLIC, + DMA_INTERLEAVE, + DMA_COMPLETION_NO_ORDER, + DMA_REPEAT, + DMA_LOAD_EOT, +/* last transaction type for creation of the capabilities mask */ + DMA_TX_TYPE_END, +}; + +/** + * enum dma_transfer_direction - dma transfer mode and direction indicator + * @DMA_MEM_TO_MEM: Async/Memcpy mode + * @DMA_MEM_TO_DEV: Slave mode & From Memory to Device + * @DMA_DEV_TO_MEM: Slave mode & From Device to Memory + * @DMA_DEV_TO_DEV: Slave mode & From Device to Device + */ +enum dma_transfer_direction { + DMA_MEM_TO_MEM, + DMA_MEM_TO_DEV, + DMA_DEV_TO_MEM, + DMA_DEV_TO_DEV, + DMA_TRANS_NONE, +}; + +/** + * Interleaved Transfer Request + * ---------------------------- + * A chunk is collection of contiguous bytes to be transferred. + * The gap(in bytes) between two chunks is called inter-chunk-gap(ICG). + * ICGs may or may not change between chunks. + * A FRAME is the smallest series of contiguous {chunk,icg} pairs, + * that when repeated an integral number of times, specifies the transfer. + * A transfer template is specification of a Frame, the number of times + * it is to be repeated and other per-transfer attributes. + * + * Practically, a client driver would have ready a template for each + * type of transfer it is going to need during its lifetime and + * set only 'src_start' and 'dst_start' before submitting the requests. + * + * + * | Frame-1 | Frame-2 | ~ | Frame-'numf' | + * |====....==.===...=...|====....==.===...=...| ~ |====....==.===...=...| + * + * == Chunk size + * ... ICG + */ + +/** + * struct data_chunk - Element of scatter-gather list that makes a frame. + * @size: Number of bytes to read from source. + * size_dst := fn(op, size_src), so doesn't mean much for destination. + * @icg: Number of bytes to jump after last src/dst address of this + * chunk and before first src/dst address for next chunk. + * Ignored for dst(assumed 0), if dst_inc is true and dst_sgl is false. + * Ignored for src(assumed 0), if src_inc is true and src_sgl is false. + * @dst_icg: Number of bytes to jump after last dst address of this + * chunk and before the first dst address for next chunk. + * Ignored if dst_inc is true and dst_sgl is false. + * @src_icg: Number of bytes to jump after last src address of this + * chunk and before the first src address for next chunk. + * Ignored if src_inc is true and src_sgl is false. + */ +struct data_chunk { + size_t size; + size_t icg; + size_t dst_icg; + size_t src_icg; +}; + +/** + * struct dma_interleaved_template - Template to convey DMAC the transfer pattern + * and attributes. + * @src_start: Bus address of source for the first chunk. + * @dst_start: Bus address of destination for the first chunk. + * @dir: Specifies the type of Source and Destination. + * @src_inc: If the source address increments after reading from it. + * @dst_inc: If the destination address increments after writing to it. + * @src_sgl: If the 'icg' of sgl[] applies to Source (scattered read). + * Otherwise, source is read contiguously (icg ignored). + * Ignored if src_inc is false. + * @dst_sgl: If the 'icg' of sgl[] applies to Destination (scattered write). + * Otherwise, destination is filled contiguously (icg ignored). + * Ignored if dst_inc is false. + * @numf: Number of frames in this template. + * @frame_size: Number of chunks in a frame i.e, size of sgl[]. + * @sgl: Array of {chunk,icg} pairs that make up a frame. + */ +struct dma_interleaved_template { + dma_addr_t src_start; + dma_addr_t dst_start; + enum dma_transfer_direction dir; + bool src_inc; + bool dst_inc; + bool src_sgl; + bool dst_sgl; + size_t numf; + size_t frame_size; + struct data_chunk sgl[]; +}; + +/** + * enum dma_ctrl_flags - DMA flags to augment operation preparation, + * control completion, and communicate status. + * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of + * this transaction + * @DMA_CTRL_ACK - if clear, the descriptor cannot be reused until the client + * acknowledges receipt, i.e. has a chance to establish any dependency + * chains + * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q + * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P + * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as + * sources that were the result of a previous operation, in the case of a PQ + * operation it continues the calculation with new sources + * @DMA_PREP_FENCE - tell the driver that subsequent operations depend + * on the result of this operation + * @DMA_CTRL_REUSE: client can reuse the descriptor and submit again till + * cleared or freed + * @DMA_PREP_CMD: tell the driver that the data passed to DMA API is command + * data and the descriptor should be in different format from normal + * data descriptors. + * @DMA_PREP_REPEAT: tell the driver that the transaction shall be automatically + * repeated when it ends until a transaction is issued on the same channel + * with the DMA_PREP_LOAD_EOT flag set. This flag is only applicable to + * interleaved transactions and is ignored for all other transaction types. + * @DMA_PREP_LOAD_EOT: tell the driver that the transaction shall replace any + * active repeated (as indicated by DMA_PREP_REPEAT) transaction when the + * repeated transaction ends. Not setting this flag when the previously queued + * transaction is marked with DMA_PREP_REPEAT will cause the new transaction + * to never be processed and stay in the issued queue forever. The flag is + * ignored if the previous transaction is not a repeated transaction. + */ +enum dma_ctrl_flags { + DMA_PREP_INTERRUPT = (1 << 0), + DMA_CTRL_ACK = (1 << 1), + DMA_PREP_PQ_DISABLE_P = (1 << 2), + DMA_PREP_PQ_DISABLE_Q = (1 << 3), + DMA_PREP_CONTINUE = (1 << 4), + DMA_PREP_FENCE = (1 << 5), + DMA_CTRL_REUSE = (1 << 6), + DMA_PREP_CMD = (1 << 7), + DMA_PREP_REPEAT = (1 << 8), + DMA_PREP_LOAD_EOT = (1 << 9), +}; + +/** + * enum sum_check_bits - bit position of pq_check_flags + */ +enum sum_check_bits { + SUM_CHECK_P = 0, + SUM_CHECK_Q = 1, +}; + +/** + * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations + * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise + * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise + */ +enum sum_check_flags { + SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P), + SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q), +}; + + +/** + * dma_cap_mask_t - capabilities bitmap modeled after cpumask_t. + * See linux/cpumask.h + */ +typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t; + +/** + * enum dma_desc_metadata_mode - per descriptor metadata mode types supported + * @DESC_METADATA_CLIENT - the metadata buffer is allocated/provided by the + * client driver and it is attached (via the dmaengine_desc_attach_metadata() + * helper) to the descriptor. + * + * Client drivers interested to use this mode can follow: + * - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM: + * 1. prepare the descriptor (dmaengine_prep_*) + * construct the metadata in the client's buffer + * 2. use dmaengine_desc_attach_metadata() to attach the buffer to the + * descriptor + * 3. submit the transfer + * - DMA_DEV_TO_MEM: + * 1. prepare the descriptor (dmaengine_prep_*) + * 2. use dmaengine_desc_attach_metadata() to attach the buffer to the + * descriptor + * 3. submit the transfer + * 4. when the transfer is completed, the metadata should be available in the + * attached buffer + * + * @DESC_METADATA_ENGINE - the metadata buffer is allocated/managed by the DMA + * driver. The client driver can ask for the pointer, maximum size and the + * currently used size of the metadata and can directly update or read it. + * dmaengine_desc_get_metadata_ptr() and dmaengine_desc_set_metadata_len() is + * provided as helper functions. + * + * Note: the metadata area for the descriptor is no longer valid after the + * transfer has been completed (valid up to the point when the completion + * callback returns if used). + * + * Client drivers interested to use this mode can follow: + * - DMA_MEM_TO_DEV / DEV_MEM_TO_MEM: + * 1. prepare the descriptor (dmaengine_prep_*) + * 2. use dmaengine_desc_get_metadata_ptr() to get the pointer to the engine's + * metadata area + * 3. update the metadata at the pointer + * 4. use dmaengine_desc_set_metadata_len() to tell the DMA engine the amount + * of data the client has placed into the metadata buffer + * 5. submit the transfer + * - DMA_DEV_TO_MEM: + * 1. prepare the descriptor (dmaengine_prep_*) + * 2. submit the transfer + * 3. on transfer completion, use dmaengine_desc_get_metadata_ptr() to get the + * pointer to the engine's metadata area + * 4. Read out the metadata from the pointer + * + * Note: the two mode is not compatible and clients must use one mode for a + * descriptor. + */ +enum dma_desc_metadata_mode { + DESC_METADATA_NONE = 0, + DESC_METADATA_CLIENT = BIT(0), + DESC_METADATA_ENGINE = BIT(1), +}; + +/** + * struct dma_chan_percpu - the per-CPU part of struct dma_chan + * @memcpy_count: transaction counter + * @bytes_transferred: byte counter + */ +struct dma_chan_percpu { + /* stats */ + unsigned long memcpy_count; + unsigned long bytes_transferred; +}; + +/** + * struct dma_router - DMA router structure + * @dev: pointer to the DMA router device + * @route_free: function to be called when the route can be disconnected + */ +struct dma_router { + struct device *dev; + void (*route_free)(struct device *dev, void *route_data); +}; + +/** + * struct dma_chan - devices supply DMA channels, clients use them + * @device: ptr to the dma device who supplies this channel, always !%NULL + * @slave: ptr to the device using this channel + * @cookie: last cookie value returned to client + * @completed_cookie: last completed cookie for this channel + * @chan_id: channel ID for sysfs + * @dev: class device for sysfs + * @name: backlink name for sysfs + * @dbg_client_name: slave name for debugfs in format: + * dev_name(requester's dev):channel name, for example: "2b00000.mcasp:tx" + * @device_node: used to add this to the device chan list + * @local: per-cpu pointer to a struct dma_chan_percpu + * @client_count: how many clients are using this channel + * @table_count: number of appearances in the mem-to-mem allocation table + * @router: pointer to the DMA router structure + * @route_data: channel specific data for the router + * @private: private data for certain client-channel associations + */ +struct dma_chan { + struct dma_device *device; + struct device *slave; + dma_cookie_t cookie; + dma_cookie_t completed_cookie; + + /* sysfs */ + int chan_id; + struct dma_chan_dev *dev; + const char *name; +#ifdef CONFIG_DEBUG_FS + char *dbg_client_name; +#endif + + struct list_head device_node; + struct dma_chan_percpu __percpu *local; + int client_count; + int table_count; + + /* DMA router */ + struct dma_router *router; + void *route_data; + + void *private; +}; + +/** + * struct dma_chan_dev - relate sysfs device node to backing channel device + * @chan: driver channel device + * @device: sysfs device + * @dev_id: parent dma_device dev_id + * @chan_dma_dev: The channel is using custom/different dma-mapping + * compared to the parent dma_device + */ +struct dma_chan_dev { + struct dma_chan *chan; + struct device device; + int dev_id; + bool chan_dma_dev; +}; + +/** + * enum dma_slave_buswidth - defines bus width of the DMA slave + * device, source or target buses + */ +enum dma_slave_buswidth { + DMA_SLAVE_BUSWIDTH_UNDEFINED = 0, + DMA_SLAVE_BUSWIDTH_1_BYTE = 1, + DMA_SLAVE_BUSWIDTH_2_BYTES = 2, + DMA_SLAVE_BUSWIDTH_3_BYTES = 3, + DMA_SLAVE_BUSWIDTH_4_BYTES = 4, + DMA_SLAVE_BUSWIDTH_8_BYTES = 8, + DMA_SLAVE_BUSWIDTH_16_BYTES = 16, + DMA_SLAVE_BUSWIDTH_32_BYTES = 32, + DMA_SLAVE_BUSWIDTH_64_BYTES = 64, + DMA_SLAVE_BUSWIDTH_128_BYTES = 128, +}; + +/** + * struct dma_slave_config - dma slave channel runtime config + * @direction: whether the data shall go in or out on this slave + * channel, right now. DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are + * legal values. DEPRECATED, drivers should use the direction argument + * to the device_prep_slave_sg and device_prep_dma_cyclic functions or + * the dir field in the dma_interleaved_template structure. + * @src_addr: this is the physical address where DMA slave data + * should be read (RX), if the source is memory this argument is + * ignored. + * @dst_addr: this is the physical address where DMA slave data + * should be written (TX), if the source is memory this argument + * is ignored. + * @src_addr_width: this is the width in bytes of the source (RX) + * register where DMA data shall be read. If the source + * is memory this may be ignored depending on architecture. + * Legal values: 1, 2, 3, 4, 8, 16, 32, 64, 128. + * @dst_addr_width: same as src_addr_width but for destination + * target (TX) mutatis mutandis. + * @src_maxburst: the maximum number of words (note: words, as in + * units of the src_addr_width member, not bytes) that can be sent + * in one burst to the device. Typically something like half the + * FIFO depth on I/O peripherals so you don't overflow it. This + * may or may not be applicable on memory sources. + * @dst_maxburst: same as src_maxburst but for destination target + * mutatis mutandis. + * @src_port_window_size: The length of the register area in words the data need + * to be accessed on the device side. It is only used for devices which is using + * an area instead of a single register to receive the data. Typically the DMA + * loops in this area in order to transfer the data. + * @dst_port_window_size: same as src_port_window_size but for the destination + * port. + * @device_fc: Flow Controller Settings. Only valid for slave channels. Fill + * with 'true' if peripheral should be flow controller. Direction will be + * selected at Runtime. + * @peripheral_config: peripheral configuration for programming peripheral + * for dmaengine transfer + * @peripheral_size: peripheral configuration buffer size + * + * This struct is passed in as configuration data to a DMA engine + * in order to set up a certain channel for DMA transport at runtime. + * The DMA device/engine has to provide support for an additional + * callback in the dma_device structure, device_config and this struct + * will then be passed in as an argument to the function. + * + * The rationale for adding configuration information to this struct is as + * follows: if it is likely that more than one DMA slave controllers in + * the world will support the configuration option, then make it generic. + * If not: if it is fixed so that it be sent in static from the platform + * data, then prefer to do that. + */ +struct dma_slave_config { + enum dma_transfer_direction direction; + phys_addr_t src_addr; + phys_addr_t dst_addr; + enum dma_slave_buswidth src_addr_width; + enum dma_slave_buswidth dst_addr_width; + u32 src_maxburst; + u32 dst_maxburst; + u32 src_port_window_size; + u32 dst_port_window_size; + bool device_fc; + void *peripheral_config; + size_t peripheral_size; +}; + +/** + * enum dma_residue_granularity - Granularity of the reported transfer residue + * @DMA_RESIDUE_GRANULARITY_DESCRIPTOR: Residue reporting is not support. The + * DMA channel is only able to tell whether a descriptor has been completed or + * not, which means residue reporting is not supported by this channel. The + * residue field of the dma_tx_state field will always be 0. + * @DMA_RESIDUE_GRANULARITY_SEGMENT: Residue is updated after each successfully + * completed segment of the transfer (For cyclic transfers this is after each + * period). This is typically implemented by having the hardware generate an + * interrupt after each transferred segment and then the drivers updates the + * outstanding residue by the size of the segment. Another possibility is if + * the hardware supports scatter-gather and the segment descriptor has a field + * which gets set after the segment has been completed. The driver then counts + * the number of segments without the flag set to compute the residue. + * @DMA_RESIDUE_GRANULARITY_BURST: Residue is updated after each transferred + * burst. This is typically only supported if the hardware has a progress + * register of some sort (E.g. a register with the current read/write address + * or a register with the amount of bursts/beats/bytes that have been + * transferred or still need to be transferred). + */ +enum dma_residue_granularity { + DMA_RESIDUE_GRANULARITY_DESCRIPTOR = 0, + DMA_RESIDUE_GRANULARITY_SEGMENT = 1, + DMA_RESIDUE_GRANULARITY_BURST = 2, +}; + +/** + * struct dma_slave_caps - expose capabilities of a slave channel only + * @src_addr_widths: bit mask of src addr widths the channel supports. + * Width is specified in bytes, e.g. for a channel supporting + * a width of 4 the mask should have BIT(4) set. + * @dst_addr_widths: bit mask of dst addr widths the channel supports + * @directions: bit mask of slave directions the channel supports. + * Since the enum dma_transfer_direction is not defined as bit flag for + * each type, the dma controller should set BIT(<TYPE>) and same + * should be checked by controller as well + * @min_burst: min burst capability per-transfer + * @max_burst: max burst capability per-transfer + * @max_sg_burst: max number of SG list entries executed in a single burst + * DMA tansaction with no software intervention for reinitialization. + * Zero value means unlimited number of entries. + * @cmd_pause: true, if pause is supported (i.e. for reading residue or + * for resume later) + * @cmd_resume: true, if resume is supported + * @cmd_terminate: true, if terminate cmd is supported + * @residue_granularity: granularity of the reported transfer residue + * @descriptor_reuse: if a descriptor can be reused by client and + * resubmitted multiple times + */ +struct dma_slave_caps { + u32 src_addr_widths; + u32 dst_addr_widths; + u32 directions; + u32 min_burst; + u32 max_burst; + u32 max_sg_burst; + bool cmd_pause; + bool cmd_resume; + bool cmd_terminate; + enum dma_residue_granularity residue_granularity; + bool descriptor_reuse; +}; + +static inline const char *dma_chan_name(struct dma_chan *chan) +{ + return dev_name(&chan->dev->device); +} + +void dma_chan_cleanup(struct kref *kref); + +/** + * typedef dma_filter_fn - callback filter for dma_request_channel + * @chan: channel to be reviewed + * @filter_param: opaque parameter passed through dma_request_channel + * + * When this optional parameter is specified in a call to dma_request_channel a + * suitable channel is passed to this routine for further dispositioning before + * being returned. Where 'suitable' indicates a non-busy channel that + * satisfies the given capability mask. It returns 'true' to indicate that the + * channel is suitable. + */ +typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); + +typedef void (*dma_async_tx_callback)(void *dma_async_param); + +enum dmaengine_tx_result { + DMA_TRANS_NOERROR = 0, /* SUCCESS */ + DMA_TRANS_READ_FAILED, /* Source DMA read failed */ + DMA_TRANS_WRITE_FAILED, /* Destination DMA write failed */ + DMA_TRANS_ABORTED, /* Op never submitted / aborted */ +}; + +struct dmaengine_result { + enum dmaengine_tx_result result; + u32 residue; +}; + +typedef void (*dma_async_tx_callback_result)(void *dma_async_param, + const struct dmaengine_result *result); + +struct dmaengine_unmap_data { +#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID) + u16 map_cnt; +#else + u8 map_cnt; +#endif + u8 to_cnt; + u8 from_cnt; + u8 bidi_cnt; + struct device *dev; + struct kref kref; + size_t len; + dma_addr_t addr[]; +}; + +struct dma_async_tx_descriptor; + +struct dma_descriptor_metadata_ops { + int (*attach)(struct dma_async_tx_descriptor *desc, void *data, + size_t len); + + void *(*get_ptr)(struct dma_async_tx_descriptor *desc, + size_t *payload_len, size_t *max_len); + int (*set_len)(struct dma_async_tx_descriptor *desc, + size_t payload_len); +}; + +/** + * struct dma_async_tx_descriptor - async transaction descriptor + * ---dma generic offload fields--- + * @cookie: tracking cookie for this transaction, set to -EBUSY if + * this tx is sitting on a dependency list + * @flags: flags to augment operation preparation, control completion, and + * communicate status + * @phys: physical address of the descriptor + * @chan: target channel for this operation + * @tx_submit: accept the descriptor, assign ordered cookie and mark the + * descriptor pending. To be pushed on .issue_pending() call + * @callback: routine to call after this operation is complete + * @callback_param: general parameter to pass to the callback routine + * @desc_metadata_mode: core managed metadata mode to protect mixed use of + * DESC_METADATA_CLIENT or DESC_METADATA_ENGINE. Otherwise + * DESC_METADATA_NONE + * @metadata_ops: DMA driver provided metadata mode ops, need to be set by the + * DMA driver if metadata mode is supported with the descriptor + * ---async_tx api specific fields--- + * @next: at completion submit this descriptor + * @parent: pointer to the next level up in the dependency chain + * @lock: protect the parent and next pointers + */ +struct dma_async_tx_descriptor { + dma_cookie_t cookie; + enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */ + dma_addr_t phys; + struct dma_chan *chan; + dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx); + int (*desc_free)(struct dma_async_tx_descriptor *tx); + dma_async_tx_callback callback; + dma_async_tx_callback_result callback_result; + void *callback_param; + struct dmaengine_unmap_data *unmap; + enum dma_desc_metadata_mode desc_metadata_mode; + struct dma_descriptor_metadata_ops *metadata_ops; +#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH + struct dma_async_tx_descriptor *next; + struct dma_async_tx_descriptor *parent; + spinlock_t lock; +#endif +}; + +#ifdef CONFIG_DMA_ENGINE +static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx, + struct dmaengine_unmap_data *unmap) +{ + kref_get(&unmap->kref); + tx->unmap = unmap; +} + +struct dmaengine_unmap_data * +dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags); +void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap); +#else +static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx, + struct dmaengine_unmap_data *unmap) +{ +} +static inline struct dmaengine_unmap_data * +dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags) +{ + return NULL; +} +static inline void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap) +{ +} +#endif + +static inline void dma_descriptor_unmap(struct dma_async_tx_descriptor *tx) +{ + if (!tx->unmap) + return; + + dmaengine_unmap_put(tx->unmap); + tx->unmap = NULL; +} + +#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH +static inline void txd_lock(struct dma_async_tx_descriptor *txd) +{ +} +static inline void txd_unlock(struct dma_async_tx_descriptor *txd) +{ +} +static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next) +{ + BUG(); +} +static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd) +{ +} +static inline void txd_clear_next(struct dma_async_tx_descriptor *txd) +{ +} +static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd) +{ + return NULL; +} +static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd) +{ + return NULL; +} + +#else +static inline void txd_lock(struct dma_async_tx_descriptor *txd) +{ + spin_lock_bh(&txd->lock); +} +static inline void txd_unlock(struct dma_async_tx_descriptor *txd) +{ + spin_unlock_bh(&txd->lock); +} +static inline void txd_chain(struct dma_async_tx_descriptor *txd, struct dma_async_tx_descriptor *next) +{ + txd->next = next; + next->parent = txd; +} +static inline void txd_clear_parent(struct dma_async_tx_descriptor *txd) +{ + txd->parent = NULL; +} +static inline void txd_clear_next(struct dma_async_tx_descriptor *txd) +{ + txd->next = NULL; +} +static inline struct dma_async_tx_descriptor *txd_parent(struct dma_async_tx_descriptor *txd) +{ + return txd->parent; +} +static inline struct dma_async_tx_descriptor *txd_next(struct dma_async_tx_descriptor *txd) +{ + return txd->next; +} +#endif + +/** + * struct dma_tx_state - filled in to report the status of + * a transfer. + * @last: last completed DMA cookie + * @used: last issued DMA cookie (i.e. the one in progress) + * @residue: the remaining number of bytes left to transmit + * on the selected transfer for states DMA_IN_PROGRESS and + * DMA_PAUSED if this is implemented in the driver, else 0 + * @in_flight_bytes: amount of data in bytes cached by the DMA. + */ +struct dma_tx_state { + dma_cookie_t last; + dma_cookie_t used; + u32 residue; + u32 in_flight_bytes; +}; + +/** + * enum dmaengine_alignment - defines alignment of the DMA async tx + * buffers + */ +enum dmaengine_alignment { + DMAENGINE_ALIGN_1_BYTE = 0, + DMAENGINE_ALIGN_2_BYTES = 1, + DMAENGINE_ALIGN_4_BYTES = 2, + DMAENGINE_ALIGN_8_BYTES = 3, + DMAENGINE_ALIGN_16_BYTES = 4, + DMAENGINE_ALIGN_32_BYTES = 5, + DMAENGINE_ALIGN_64_BYTES = 6, + DMAENGINE_ALIGN_128_BYTES = 7, + DMAENGINE_ALIGN_256_BYTES = 8, +}; + +/** + * struct dma_slave_map - associates slave device and it's slave channel with + * parameter to be used by a filter function + * @devname: name of the device + * @slave: slave channel name + * @param: opaque parameter to pass to struct dma_filter.fn + */ +struct dma_slave_map { + const char *devname; + const char *slave; + void *param; +}; + +/** + * struct dma_filter - information for slave device/channel to filter_fn/param + * mapping + * @fn: filter function callback + * @mapcnt: number of slave device/channel in the map + * @map: array of channel to filter mapping data + */ +struct dma_filter { + dma_filter_fn fn; + int mapcnt; + const struct dma_slave_map *map; +}; + +/** + * struct dma_device - info on the entity supplying DMA services + * @chancnt: how many DMA channels are supported + * @privatecnt: how many DMA channels are requested by dma_request_channel + * @channels: the list of struct dma_chan + * @global_node: list_head for global dma_device_list + * @filter: information for device/slave to filter function/param mapping + * @cap_mask: one or more dma_capability flags + * @desc_metadata_modes: supported metadata modes by the DMA device + * @max_xor: maximum number of xor sources, 0 if no capability + * @max_pq: maximum number of PQ sources and PQ-continue capability + * @copy_align: alignment shift for memcpy operations + * @xor_align: alignment shift for xor operations + * @pq_align: alignment shift for pq operations + * @fill_align: alignment shift for memset operations + * @dev_id: unique device ID + * @dev: struct device reference for dma mapping api + * @owner: owner module (automatically set based on the provided dev) + * @src_addr_widths: bit mask of src addr widths the device supports + * Width is specified in bytes, e.g. for a device supporting + * a width of 4 the mask should have BIT(4) set. + * @dst_addr_widths: bit mask of dst addr widths the device supports + * @directions: bit mask of slave directions the device supports. + * Since the enum dma_transfer_direction is not defined as bit flag for + * each type, the dma controller should set BIT(<TYPE>) and same + * should be checked by controller as well + * @min_burst: min burst capability per-transfer + * @max_burst: max burst capability per-transfer + * @max_sg_burst: max number of SG list entries executed in a single burst + * DMA tansaction with no software intervention for reinitialization. + * Zero value means unlimited number of entries. + * @residue_granularity: granularity of the transfer residue reported + * by tx_status + * @device_alloc_chan_resources: allocate resources and return the + * number of allocated descriptors + * @device_router_config: optional callback for DMA router configuration + * @device_free_chan_resources: release DMA channel's resources + * @device_prep_dma_memcpy: prepares a memcpy operation + * @device_prep_dma_xor: prepares a xor operation + * @device_prep_dma_xor_val: prepares a xor validation operation + * @device_prep_dma_pq: prepares a pq operation + * @device_prep_dma_pq_val: prepares a pqzero_sum operation + * @device_prep_dma_memset: prepares a memset operation + * @device_prep_dma_memset_sg: prepares a memset operation over a scatter list + * @device_prep_dma_interrupt: prepares an end of chain interrupt operation + * @device_prep_slave_sg: prepares a slave dma operation + * @device_prep_dma_cyclic: prepare a cyclic dma operation suitable for audio. + * The function takes a buffer of size buf_len. The callback function will + * be called after period_len bytes have been transferred. + * @device_prep_interleaved_dma: Transfer expression in a generic way. + * @device_prep_dma_imm_data: DMA's 8 byte immediate data to the dst address + * @device_caps: May be used to override the generic DMA slave capabilities + * with per-channel specific ones + * @device_config: Pushes a new configuration to a channel, return 0 or an error + * code + * @device_pause: Pauses any transfer happening on a channel. Returns + * 0 or an error code + * @device_resume: Resumes any transfer on a channel previously + * paused. Returns 0 or an error code + * @device_terminate_all: Aborts all transfers on a channel. Returns 0 + * or an error code + * @device_synchronize: Synchronizes the termination of a transfers to the + * current context. + * @device_tx_status: poll for transaction completion, the optional + * txstate parameter can be supplied with a pointer to get a + * struct with auxiliary transfer status information, otherwise the call + * will just return a simple status code + * @device_issue_pending: push pending transactions to hardware + * @descriptor_reuse: a submitted transfer can be resubmitted after completion + * @device_release: called sometime atfer dma_async_device_unregister() is + * called and there are no further references to this structure. This + * must be implemented to free resources however many existing drivers + * do not and are therefore not safe to unbind while in use. + * @dbg_summary_show: optional routine to show contents in debugfs; default code + * will be used when this is omitted, but custom code can show extra, + * controller specific information. + */ +struct dma_device { + struct kref ref; + unsigned int chancnt; + unsigned int privatecnt; + struct list_head channels; + struct list_head global_node; + struct dma_filter filter; + dma_cap_mask_t cap_mask; + enum dma_desc_metadata_mode desc_metadata_modes; + unsigned short max_xor; + unsigned short max_pq; + enum dmaengine_alignment copy_align; + enum dmaengine_alignment xor_align; + enum dmaengine_alignment pq_align; + enum dmaengine_alignment fill_align; + #define DMA_HAS_PQ_CONTINUE (1 << 15) + + int dev_id; + struct device *dev; + struct module *owner; + struct ida chan_ida; + + u32 src_addr_widths; + u32 dst_addr_widths; + u32 directions; + u32 min_burst; + u32 max_burst; + u32 max_sg_burst; + bool descriptor_reuse; + enum dma_residue_granularity residue_granularity; + + int (*device_alloc_chan_resources)(struct dma_chan *chan); + int (*device_router_config)(struct dma_chan *chan); + void (*device_free_chan_resources)(struct dma_chan *chan); + + struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)( + struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, + size_t len, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_xor)( + struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src, + unsigned int src_cnt, size_t len, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)( + struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt, + size_t len, enum sum_check_flags *result, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_pq)( + struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, + size_t len, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)( + struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, size_t len, + enum sum_check_flags *pqres, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_memset)( + struct dma_chan *chan, dma_addr_t dest, int value, size_t len, + unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_memset_sg)( + struct dma_chan *chan, struct scatterlist *sg, + unsigned int nents, int value, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)( + struct dma_chan *chan, unsigned long flags); + + struct dma_async_tx_descriptor *(*device_prep_slave_sg)( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction direction, + unsigned long flags, void *context); + struct dma_async_tx_descriptor *(*device_prep_dma_cyclic)( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_imm_data)( + struct dma_chan *chan, dma_addr_t dst, u64 data, + unsigned long flags); + + void (*device_caps)(struct dma_chan *chan, + struct dma_slave_caps *caps); + int (*device_config)(struct dma_chan *chan, + struct dma_slave_config *config); + int (*device_pause)(struct dma_chan *chan); + int (*device_resume)(struct dma_chan *chan); + int (*device_terminate_all)(struct dma_chan *chan); + void (*device_synchronize)(struct dma_chan *chan); + + enum dma_status (*device_tx_status)(struct dma_chan *chan, + dma_cookie_t cookie, + struct dma_tx_state *txstate); + void (*device_issue_pending)(struct dma_chan *chan); + void (*device_release)(struct dma_device *dev); + /* debugfs support */ + void (*dbg_summary_show)(struct seq_file *s, struct dma_device *dev); + struct dentry *dbg_dev_root; +}; + +static inline int dmaengine_slave_config(struct dma_chan *chan, + struct dma_slave_config *config) +{ + if (chan->device->device_config) + return chan->device->device_config(chan, config); + + return -ENOSYS; +} + +static inline bool is_slave_direction(enum dma_transfer_direction direction) +{ + return (direction == DMA_MEM_TO_DEV) || (direction == DMA_DEV_TO_MEM); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( + struct dma_chan *chan, dma_addr_t buf, size_t len, + enum dma_transfer_direction dir, unsigned long flags) +{ + struct scatterlist sg; + sg_init_table(&sg, 1); + sg_dma_address(&sg) = buf; + sg_dma_len(&sg) = len; + + if (!chan || !chan->device || !chan->device->device_prep_slave_sg) + return NULL; + + return chan->device->device_prep_slave_sg(chan, &sg, 1, + dir, flags, NULL); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction dir, unsigned long flags) +{ + if (!chan || !chan->device || !chan->device->device_prep_slave_sg) + return NULL; + + return chan->device->device_prep_slave_sg(chan, sgl, sg_len, + dir, flags, NULL); +} + +#ifdef CONFIG_RAPIDIO_DMA_ENGINE +struct rio_dma_ext; +static inline struct dma_async_tx_descriptor *dmaengine_prep_rio_sg( + struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, + enum dma_transfer_direction dir, unsigned long flags, + struct rio_dma_ext *rio_ext) +{ + if (!chan || !chan->device || !chan->device->device_prep_slave_sg) + return NULL; + + return chan->device->device_prep_slave_sg(chan, sgl, sg_len, + dir, flags, rio_ext); +} +#endif + +static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction dir, + unsigned long flags) +{ + if (!chan || !chan->device || !chan->device->device_prep_dma_cyclic) + return NULL; + + return chan->device->device_prep_dma_cyclic(chan, buf_addr, buf_len, + period_len, dir, flags); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( + struct dma_chan *chan, struct dma_interleaved_template *xt, + unsigned long flags) +{ + if (!chan || !chan->device || !chan->device->device_prep_interleaved_dma) + return NULL; + if (flags & DMA_PREP_REPEAT && + !test_bit(DMA_REPEAT, chan->device->cap_mask.bits)) + return NULL; + + return chan->device->device_prep_interleaved_dma(chan, xt, flags); +} + +/** + * dmaengine_prep_dma_memset() - Prepare a DMA memset descriptor. + * @chan: The channel to be used for this descriptor + * @dest: Address of buffer to be set + * @value: Treated as a single byte value that fills the destination buffer + * @len: The total size of dest + * @flags: DMA engine flags + */ +static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memset( + struct dma_chan *chan, dma_addr_t dest, int value, size_t len, + unsigned long flags) +{ + if (!chan || !chan->device || !chan->device->device_prep_dma_memset) + return NULL; + + return chan->device->device_prep_dma_memset(chan, dest, value, + len, flags); +} + +static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_memcpy( + struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, + size_t len, unsigned long flags) +{ + if (!chan || !chan->device || !chan->device->device_prep_dma_memcpy) + return NULL; + + return chan->device->device_prep_dma_memcpy(chan, dest, src, + len, flags); +} + +static inline bool dmaengine_is_metadata_mode_supported(struct dma_chan *chan, + enum dma_desc_metadata_mode mode) +{ + if (!chan) + return false; + + return !!(chan->device->desc_metadata_modes & mode); +} + +#ifdef CONFIG_DMA_ENGINE +int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc, + void *data, size_t len); +void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc, + size_t *payload_len, size_t *max_len); +int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc, + size_t payload_len); +#else /* CONFIG_DMA_ENGINE */ +static inline int dmaengine_desc_attach_metadata( + struct dma_async_tx_descriptor *desc, void *data, size_t len) +{ + return -EINVAL; +} +static inline void *dmaengine_desc_get_metadata_ptr( + struct dma_async_tx_descriptor *desc, size_t *payload_len, + size_t *max_len) +{ + return NULL; +} +static inline int dmaengine_desc_set_metadata_len( + struct dma_async_tx_descriptor *desc, size_t payload_len) +{ + return -EINVAL; +} +#endif /* CONFIG_DMA_ENGINE */ + +/** + * dmaengine_terminate_all() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * This function is DEPRECATED use either dmaengine_terminate_sync() or + * dmaengine_terminate_async() instead. + */ +static inline int dmaengine_terminate_all(struct dma_chan *chan) +{ + if (chan->device->device_terminate_all) + return chan->device->device_terminate_all(chan); + + return -ENOSYS; +} + +/** + * dmaengine_terminate_async() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending descriptors + * that have previously been submitted to the channel. It is not guaranteed + * though that the transfer for the active descriptor has stopped when the + * function returns. Furthermore it is possible the complete callback of a + * submitted transfer is still running when this function returns. + * + * dmaengine_synchronize() needs to be called before it is safe to free + * any memory that is accessed by previously submitted descriptors or before + * freeing any resources accessed from within the completion callback of any + * previously submitted descriptors. + * + * This function can be called from atomic context as well as from within a + * complete callback of a descriptor submitted on the same channel. + * + * If none of the two conditions above apply consider using + * dmaengine_terminate_sync() instead. + */ +static inline int dmaengine_terminate_async(struct dma_chan *chan) +{ + if (chan->device->device_terminate_all) + return chan->device->device_terminate_all(chan); + + return -EINVAL; +} + +/** + * dmaengine_synchronize() - Synchronize DMA channel termination + * @chan: The channel to synchronize + * + * Synchronizes to the DMA channel termination to the current context. When this + * function returns it is guaranteed that all transfers for previously issued + * descriptors have stopped and it is safe to free the memory associated + * with them. Furthermore it is guaranteed that all complete callback functions + * for a previously submitted descriptor have finished running and it is safe to + * free resources accessed from within the complete callbacks. + * + * The behavior of this function is undefined if dma_async_issue_pending() has + * been called between dmaengine_terminate_async() and this function. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline void dmaengine_synchronize(struct dma_chan *chan) +{ + might_sleep(); + + if (chan->device->device_synchronize) + chan->device->device_synchronize(chan); +} + +/** + * dmaengine_terminate_sync() - Terminate all active DMA transfers + * @chan: The channel for which to terminate the transfers + * + * Calling this function will terminate all active and pending transfers + * that have previously been submitted to the channel. It is similar to + * dmaengine_terminate_async() but guarantees that the DMA transfer has actually + * stopped and that all complete callbacks have finished running when the + * function returns. + * + * This function must only be called from non-atomic context and must not be + * called from within a complete callback of a descriptor submitted on the same + * channel. + */ +static inline int dmaengine_terminate_sync(struct dma_chan *chan) +{ + int ret; + + ret = dmaengine_terminate_async(chan); + if (ret) + return ret; + + dmaengine_synchronize(chan); + + return 0; +} + +static inline int dmaengine_pause(struct dma_chan *chan) +{ + if (chan->device->device_pause) + return chan->device->device_pause(chan); + + return -ENOSYS; +} + +static inline int dmaengine_resume(struct dma_chan *chan) +{ + if (chan->device->device_resume) + return chan->device->device_resume(chan); + + return -ENOSYS; +} + +static inline enum dma_status dmaengine_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + return chan->device->device_tx_status(chan, cookie, state); +} + +static inline dma_cookie_t dmaengine_submit(struct dma_async_tx_descriptor *desc) +{ + return desc->tx_submit(desc); +} + +static inline bool dmaengine_check_align(enum dmaengine_alignment align, + size_t off1, size_t off2, size_t len) +{ + return !(((1 << align) - 1) & (off1 | off2 | len)); +} + +static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->copy_align, off1, off2, len); +} + +static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->xor_align, off1, off2, len); +} + +static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->pq_align, off1, off2, len); +} + +static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->fill_align, off1, off2, len); +} + +static inline void +dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue) +{ + dma->max_pq = maxpq; + if (has_pq_continue) + dma->max_pq |= DMA_HAS_PQ_CONTINUE; +} + +static inline bool dmaf_continue(enum dma_ctrl_flags flags) +{ + return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE; +} + +static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags) +{ + enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P; + + return (flags & mask) == mask; +} + +static inline bool dma_dev_has_pq_continue(struct dma_device *dma) +{ + return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE; +} + +static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma) +{ + return dma->max_pq & ~DMA_HAS_PQ_CONTINUE; +} + +/* dma_maxpq - reduce maxpq in the face of continued operations + * @dma - dma device with PQ capability + * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set + * + * When an engine does not support native continuation we need 3 extra + * source slots to reuse P and Q with the following coefficients: + * 1/ {00} * P : remove P from Q', but use it as a source for P' + * 2/ {01} * Q : use Q to continue Q' calculation + * 3/ {00} * Q : subtract Q from P' to cancel (2) + * + * In the case where P is disabled we only need 1 extra source: + * 1/ {01} * Q : use Q to continue Q' calculation + */ +static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags) +{ + if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags)) + return dma_dev_to_maxpq(dma); + if (dmaf_p_disabled_continue(flags)) + return dma_dev_to_maxpq(dma) - 1; + if (dmaf_continue(flags)) + return dma_dev_to_maxpq(dma) - 3; + BUG(); +} + +static inline size_t dmaengine_get_icg(bool inc, bool sgl, size_t icg, + size_t dir_icg) +{ + if (inc) { + if (dir_icg) + return dir_icg; + if (sgl) + return icg; + } + + return 0; +} + +static inline size_t dmaengine_get_dst_icg(struct dma_interleaved_template *xt, + struct data_chunk *chunk) +{ + return dmaengine_get_icg(xt->dst_inc, xt->dst_sgl, + chunk->icg, chunk->dst_icg); +} + +static inline size_t dmaengine_get_src_icg(struct dma_interleaved_template *xt, + struct data_chunk *chunk) +{ + return dmaengine_get_icg(xt->src_inc, xt->src_sgl, + chunk->icg, chunk->src_icg); +} + +/* --- public DMA engine API --- */ + +#ifdef CONFIG_DMA_ENGINE +void dmaengine_get(void); +void dmaengine_put(void); +#else +static inline void dmaengine_get(void) +{ +} +static inline void dmaengine_put(void) +{ +} +#endif + +#ifdef CONFIG_ASYNC_TX_DMA +#define async_dmaengine_get() dmaengine_get() +#define async_dmaengine_put() dmaengine_put() +#ifndef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH +#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX) +#else +#define async_dma_find_channel(type) dma_find_channel(type) +#endif /* CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH */ +#else +static inline void async_dmaengine_get(void) +{ +} +static inline void async_dmaengine_put(void) +{ +} +static inline struct dma_chan * +async_dma_find_channel(enum dma_transaction_type type) +{ + return NULL; +} +#endif /* CONFIG_ASYNC_TX_DMA */ +void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx, + struct dma_chan *chan); + +static inline void async_tx_ack(struct dma_async_tx_descriptor *tx) +{ + tx->flags |= DMA_CTRL_ACK; +} + +static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx) +{ + tx->flags &= ~DMA_CTRL_ACK; +} + +static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx) +{ + return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK; +} + +#define dma_cap_set(tx, mask) __dma_cap_set((tx), &(mask)) +static inline void +__dma_cap_set(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp) +{ + set_bit(tx_type, dstp->bits); +} + +#define dma_cap_clear(tx, mask) __dma_cap_clear((tx), &(mask)) +static inline void +__dma_cap_clear(enum dma_transaction_type tx_type, dma_cap_mask_t *dstp) +{ + clear_bit(tx_type, dstp->bits); +} + +#define dma_cap_zero(mask) __dma_cap_zero(&(mask)) +static inline void __dma_cap_zero(dma_cap_mask_t *dstp) +{ + bitmap_zero(dstp->bits, DMA_TX_TYPE_END); +} + +#define dma_has_cap(tx, mask) __dma_has_cap((tx), &(mask)) +static inline int +__dma_has_cap(enum dma_transaction_type tx_type, dma_cap_mask_t *srcp) +{ + return test_bit(tx_type, srcp->bits); +} + +#define for_each_dma_cap_mask(cap, mask) \ + for_each_set_bit(cap, mask.bits, DMA_TX_TYPE_END) + +/** + * dma_async_issue_pending - flush pending transactions to HW + * @chan: target DMA channel + * + * This allows drivers to push copies to HW in batches, + * reducing MMIO writes where possible. + */ +static inline void dma_async_issue_pending(struct dma_chan *chan) +{ + chan->device->device_issue_pending(chan); +} + +/** + * dma_async_is_tx_complete - poll for transaction completion + * @chan: DMA channel + * @cookie: transaction identifier to check status of + * @last: returns last completed cookie, can be NULL + * @used: returns last issued cookie, can be NULL + * + * If @last and @used are passed in, upon return they reflect the driver + * internal state and can be used with dma_async_is_complete() to check + * the status of multiple cookies without re-checking hardware state. + */ +static inline enum dma_status dma_async_is_tx_complete(struct dma_chan *chan, + dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used) +{ + struct dma_tx_state state; + enum dma_status status; + + status = chan->device->device_tx_status(chan, cookie, &state); + if (last) + *last = state.last; + if (used) + *used = state.used; + return status; +} + +/** + * dma_async_is_complete - test a cookie against chan state + * @cookie: transaction identifier to test status of + * @last_complete: last know completed transaction + * @last_used: last cookie value handed out + * + * dma_async_is_complete() is used in dma_async_is_tx_complete() + * the test logic is separated for lightweight testing of multiple cookies + */ +static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie, + dma_cookie_t last_complete, dma_cookie_t last_used) +{ + if (last_complete <= last_used) { + if ((cookie <= last_complete) || (cookie > last_used)) + return DMA_COMPLETE; + } else { + if ((cookie <= last_complete) && (cookie > last_used)) + return DMA_COMPLETE; + } + return DMA_IN_PROGRESS; +} + +static inline void +dma_set_tx_state(struct dma_tx_state *st, dma_cookie_t last, dma_cookie_t used, u32 residue) +{ + if (!st) + return; + + st->last = last; + st->used = used; + st->residue = residue; +} + +#ifdef CONFIG_DMA_ENGINE +struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); +enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); +enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); +void dma_issue_pending_all(void); +struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, + dma_filter_fn fn, void *fn_param, + struct device_node *np); + +struct dma_chan *dma_request_chan(struct device *dev, const char *name); +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); + +void dma_release_channel(struct dma_chan *chan); +int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps); +#else +static inline struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) +{ + return NULL; +} +static inline enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie) +{ + return DMA_COMPLETE; +} +static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) +{ + return DMA_COMPLETE; +} +static inline void dma_issue_pending_all(void) +{ +} +static inline struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, + dma_filter_fn fn, + void *fn_param, + struct device_node *np) +{ + return NULL; +} +static inline struct dma_chan *dma_request_chan(struct device *dev, + const char *name) +{ + return ERR_PTR(-ENODEV); +} +static inline struct dma_chan *dma_request_chan_by_mask( + const dma_cap_mask_t *mask) +{ + return ERR_PTR(-ENODEV); +} +static inline void dma_release_channel(struct dma_chan *chan) +{ +} +static inline int dma_get_slave_caps(struct dma_chan *chan, + struct dma_slave_caps *caps) +{ + return -ENXIO; +} +#endif + +static inline int dmaengine_desc_set_reuse(struct dma_async_tx_descriptor *tx) +{ + struct dma_slave_caps caps; + int ret; + + ret = dma_get_slave_caps(tx->chan, &caps); + if (ret) + return ret; + + if (!caps.descriptor_reuse) + return -EPERM; + + tx->flags |= DMA_CTRL_REUSE; + return 0; +} + +static inline void dmaengine_desc_clear_reuse(struct dma_async_tx_descriptor *tx) +{ + tx->flags &= ~DMA_CTRL_REUSE; +} + +static inline bool dmaengine_desc_test_reuse(struct dma_async_tx_descriptor *tx) +{ + return (tx->flags & DMA_CTRL_REUSE) == DMA_CTRL_REUSE; +} + +static inline int dmaengine_desc_free(struct dma_async_tx_descriptor *desc) +{ + /* this is supported for reusable desc, so check that */ + if (!dmaengine_desc_test_reuse(desc)) + return -EPERM; + + return desc->desc_free(desc); +} + +/* --- DMA device --- */ + +int dma_async_device_register(struct dma_device *device); +int dmaenginem_async_device_register(struct dma_device *device); +void dma_async_device_unregister(struct dma_device *device); +int dma_async_device_channel_register(struct dma_device *device, + struct dma_chan *chan); +void dma_async_device_channel_unregister(struct dma_device *device, + struct dma_chan *chan); +void dma_run_dependencies(struct dma_async_tx_descriptor *tx); +#define dma_request_channel(mask, x, y) \ + __dma_request_channel(&(mask), x, y, NULL) + +/* Deprecated, please use dma_request_chan() directly */ +static inline struct dma_chan * __deprecated +dma_request_slave_channel(struct device *dev, const char *name) +{ + struct dma_chan *ch = dma_request_chan(dev, name); + + return IS_ERR(ch) ? NULL : ch; +} + +static inline struct dma_chan +*dma_request_slave_channel_compat(const dma_cap_mask_t mask, + dma_filter_fn fn, void *fn_param, + struct device *dev, const char *name) +{ + struct dma_chan *chan; + + chan = dma_request_slave_channel(dev, name); + if (chan) + return chan; + + if (!fn || !fn_param) + return NULL; + + return __dma_request_channel(&mask, fn, fn_param, NULL); +} + +static inline char * +dmaengine_get_direction_text(enum dma_transfer_direction dir) +{ + switch (dir) { + case DMA_DEV_TO_MEM: + return "DEV_TO_MEM"; + case DMA_MEM_TO_DEV: + return "MEM_TO_DEV"; + case DMA_MEM_TO_MEM: + return "MEM_TO_MEM"; + case DMA_DEV_TO_DEV: + return "DEV_TO_DEV"; + default: + return "invalid"; + } +} + +static inline struct device *dmaengine_get_dma_device(struct dma_chan *chan) +{ + if (chan->dev->chan_dma_dev) + return &chan->dev->device; + + return chan->device->dev; +} + +#endif /* DMAENGINE_H */ |