diff options
Diffstat (limited to 'include/linux/firmware/intel/stratix10-smc.h')
| -rw-r--r-- | include/linux/firmware/intel/stratix10-smc.h | 598 |
1 files changed, 598 insertions, 0 deletions
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h new file mode 100644 index 000000000..a718f853d --- /dev/null +++ b/include/linux/firmware/intel/stratix10-smc.h @@ -0,0 +1,598 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2017-2018, Intel Corporation + */ + +#ifndef __STRATIX10_SMC_H +#define __STRATIX10_SMC_H + +#include <linux/arm-smccc.h> +#include <linux/bitops.h> + +/** + * This file defines the Secure Monitor Call (SMC) message protocol used for + * service layer driver in normal world (EL1) to communicate with secure + * monitor software in Secure Monitor Exception Level 3 (EL3). + * + * This file is shared with secure firmware (FW) which is out of kernel tree. + * + * An ARM SMC instruction takes a function identifier and up to 6 64-bit + * register values as arguments, and can return up to 4 64-bit register + * value. The operation of the secure monitor is determined by the parameter + * values passed in through registers. + * + * EL1 and EL3 communicates pointer as physical address rather than the + * virtual address. + * + * Functions specified by ARM SMC Calling convention: + * + * FAST call executes atomic operations, returns when the requested operation + * has completed. + * STD call starts a operation which can be preempted by a non-secure + * interrupt. The call can return before the requested operation has + * completed. + * + * a0..a7 is used as register names in the descriptions below, on arm32 + * that translates to r0..r7 and on arm64 to w0..w7. + */ + +/** + * @func_num: function ID + */ +#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \ + ARM_SMCCC_OWNER_SIP, (func_num)) + +#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \ + ARM_SMCCC_OWNER_SIP, (func_num)) + +/** + * Return values in INTEL_SIP_SMC_* call + * + * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION: + * Secure monitor software doesn't recognize the request. + * + * INTEL_SIP_SMC_STATUS_OK: + * Secure monitor software accepts the service client's request. + * + * INTEL_SIP_SMC_STATUS_BUSY: + * Secure monitor software is still processing service client's request. + * + * INTEL_SIP_SMC_STATUS_REJECTED: + * Secure monitor software reject the service client's request. + * + * INTEL_SIP_SMC_STATUS_ERROR: + * There is error during the process of service request. + * + * INTEL_SIP_SMC_RSU_ERROR: + * There is error during the process of remote status update request. + */ +#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF +#define INTEL_SIP_SMC_STATUS_OK 0x0 +#define INTEL_SIP_SMC_STATUS_BUSY 0x1 +#define INTEL_SIP_SMC_STATUS_REJECTED 0x2 +#define INTEL_SIP_SMC_STATUS_ERROR 0x4 +#define INTEL_SIP_SMC_RSU_ERROR 0x7 + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_START + * + * Sync call used by service driver at EL1 to request the FPGA in EL3 to + * be prepare to receive a new configuration. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_START. + * a1: flag for full or partial configuration. 0 for full and 1 for partial + * configuration. + * a2-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_STATUS_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1 +#define INTEL_SIP_SMC_FPGA_CONFIG_START \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE + * + * Async call used by service driver at EL1 to provide FPGA configuration data + * to secure world. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE. + * a1: 64bit physical address of the configuration data memory block + * a2: Size of configuration data block. + * a3-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or + * INTEL_SIP_SMC_STATUS_ERROR. + * a1: 64bit physical address of 1st completed memory block if any completed + * block, otherwise zero value. + * a2: 64bit physical address of 2nd completed memory block if any completed + * block, otherwise zero value. + * a3: 64bit physical address of 3rd completed memory block if any completed + * block, otherwise zero value. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2 +#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \ + INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE + * + * Sync call used by service driver at EL1 to track the completed write + * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE + * call returns INTEL_SIP_SMC_STATUS_BUSY. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_BUSY or + * INTEL_SIP_SMC_STATUS_ERROR. + * a1: 64bit physical address of 1st completed memory block. + * a2: 64bit physical address of 2nd completed memory block if + * any completed block, otherwise zero value. + * a3: 64bit physical address of 3rd completed memory block if + * any completed block, otherwise zero value. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3 +#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \ +INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE + * + * Sync call used by service driver at EL1 to inform secure world that all + * data are sent, to check whether or not the secure world had completed + * the FPGA configuration process. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_BUSY or + * INTEL_SIP_SMC_STATUS_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4 +#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM + * + * Sync call used by service driver at EL1 to query the physical address of + * memory block reserved by secure monitor software. + * + * Call register usage: + * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR. + * a1: start of physical address of reserved memory block. + * a2: size of reserved memory block. + * a3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5 +#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM) + +/** + * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK + * + * For SMC loop-back mode only, used for internal integration, debugging + * or troubleshooting. + * + * Call register usage: + * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK. + * a1-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6 +#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK) + +/** + * Request INTEL_SIP_SMC_REG_READ + * + * Read a protected register at EL3 + * + * Call register usage: + * a0: INTEL_SIP_SMC_REG_READ. + * a1: register address. + * a2-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. + * a1: value in the register + * a2-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_REG_READ 7 +#define INTEL_SIP_SMC_REG_READ \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ) + +/** + * Request INTEL_SIP_SMC_REG_WRITE + * + * Write a protected register at EL3 + * + * Call register usage: + * a0: INTEL_SIP_SMC_REG_WRITE. + * a1: register address + * a2: value to program into register. + * a3-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. + * a1-3: not used. + */ +#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8 +#define INTEL_SIP_SMC_REG_WRITE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE) + +/** + * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE + * + * Update one or more bits in a protected register at EL3 using a + * read-modify-write operation. + * + * Call register usage: + * a0: INTEL_SIP_SMC_REG_UPDATE. + * a1: register address + * a2: write Mask. + * a3: value to write. + * a4-7: not used. + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR. + * a1-3: Not used. + */ +#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9 +#define INTEL_SIP_SMC_REG_UPDATE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE) + +/** + * Request INTEL_SIP_SMC_RSU_STATUS + * + * Request remote status update boot log, call is synchronous. + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_STATUS + * a1-7 not used + * + * Return status + * a0: Current Image + * a1: Last Failing Image + * a2: Version | State + * a3: Error details | Error location + * + * Or + * + * a0: INTEL_SIP_SMC_RSU_ERROR + */ +#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11 +#define INTEL_SIP_SMC_RSU_STATUS \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS) + +/** + * Request INTEL_SIP_SMC_RSU_UPDATE + * + * Request to set the offset of the bitstream to boot after reboot, call + * is synchronous. + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_UPDATE + * a1 64bit physical address of the configuration data memory in flash + * a2-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + */ +#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12 +#define INTEL_SIP_SMC_RSU_UPDATE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE) + +/** + * Request INTEL_SIP_SMC_ECC_DBE + * + * Sync call used by service driver at EL1 to alert EL3 that a Double + * Bit ECC error has occurred. + * + * Call register usage: + * a0 INTEL_SIP_SMC_ECC_DBE + * a1 SysManager Double Bit Error value + * a2-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + */ +#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13 +#define INTEL_SIP_SMC_ECC_DBE \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE) + +/** + * Request INTEL_SIP_SMC_RSU_NOTIFY + * + * Sync call used by service driver at EL1 to report hard processor + * system execution stage to firmware + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_NOTIFY + * a1 32bit value representing hard processor system execution stage + * a2-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + */ +#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14 +#define INTEL_SIP_SMC_RSU_NOTIFY \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY) + +/** + * Request INTEL_SIP_SMC_RSU_RETRY_COUNTER + * + * Sync call used by service driver at EL1 to query RSU retry counter + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER + * a1-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 the retry counter + * + * Or + * + * a0 INTEL_SIP_SMC_RSU_ERROR + */ +#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15 +#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER) + +/** + * Request INTEL_SIP_SMC_RSU_DCMF_VERSION + * + * Sync call used by service driver at EL1 to query DCMF (Decision + * Configuration Management Firmware) version from FW + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_DCMF_VERSION + * a1-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 dcmf1 | dcmf0 + * a2 dcmf3 | dcmf2 + * + * Or + * + * a0 INTEL_SIP_SMC_RSU_ERROR + */ +#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION 16 +#define INTEL_SIP_SMC_RSU_DCMF_VERSION \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION) + +/** + * Request INTEL_SIP_SMC_RSU_MAX_RETRY + * + * Sync call used by service driver at EL1 to query max retry value from FW + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_MAX_RETRY + * a1-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 max retry value + * + * Or + * a0 INTEL_SIP_SMC_RSU_ERROR + */ +#define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18 +#define INTEL_SIP_SMC_RSU_MAX_RETRY \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY) + +/** + * Request INTEL_SIP_SMC_RSU_DCMF_STATUS + * + * Sync call used by service driver at EL1 to query DCMF status from FW + * + * Call register usage: + * a0 INTEL_SIP_SMC_RSU_DCMF_STATUS + * a1-7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 dcmf3 | dcmf2 | dcmf1 | dcmf0 + * + * Or + * + * a0 INTEL_SIP_SMC_RSU_ERROR + */ +#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS 20 +#define INTEL_SIP_SMC_RSU_DCMF_STATUS \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_STATUS) + +/** + * Request INTEL_SIP_SMC_SERVICE_COMPLETED + * Sync call to check if the secure world have completed service request + * or not. + * + * Call register usage: + * a0: INTEL_SIP_SMC_SERVICE_COMPLETED + * a1: this register is optional. If used, it is the physical address for + * secure firmware to put output data + * a2: this register is optional. If used, it is the size of output data + * a3-a7: not used + * + * Return status: + * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_ERROR, + * INTEL_SIP_SMC_REJECTED or INTEL_SIP_SMC_STATUS_BUSY + * a1: mailbox error if a0 is INTEL_SIP_SMC_STATUS_ERROR + * a2: physical address containing the process info + * for FCS certificate -- the data contains the certificate status + * for FCS cryption -- the data contains the actual data size FW processes + * a3: output data size + */ +#define INTEL_SIP_SMC_FUNCID_SERVICE_COMPLETED 30 +#define INTEL_SIP_SMC_SERVICE_COMPLETED \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_SERVICE_COMPLETED) + +/** + * Request INTEL_SIP_SMC_FIRMWARE_VERSION + * + * Sync call used to query the version of running firmware + * + * Call register usage: + * a0 INTEL_SIP_SMC_FIRMWARE_VERSION + * a1-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR + * a1 running firmware version + */ +#define INTEL_SIP_SMC_FUNCID_FIRMWARE_VERSION 31 +#define INTEL_SIP_SMC_FIRMWARE_VERSION \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FIRMWARE_VERSION) + +/** + * Request INTEL_SIP_SMC_SVC_VERSION + * + * Sync call used to query the SIP SMC API Version + * + * Call register usage: + * a0 INTEL_SIP_SMC_SVC_VERSION + * a1-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 Major + * a2 Minor + */ +#define INTEL_SIP_SMC_SVC_FUNCID_VERSION 512 +#define INTEL_SIP_SMC_SVC_VERSION \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_SVC_FUNCID_VERSION) + +/** + * SMC call protocol for FPGA Crypto Service (FCS) + * FUNCID starts from 90 + */ + +/** + * Request INTEL_SIP_SMC_FCS_RANDOM_NUMBER + * + * Sync call used to query the random number generated by the firmware + * + * Call register usage: + * a0 INTEL_SIP_SMC_FCS_RANDOM_NUMBER + * a1 the physical address for firmware to write generated random data + * a2-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FCS_ERROR or + * INTEL_SIP_SMC_FCS_REJECTED + * a1 mailbox error + * a2 the physical address of generated random number + * a3 size + */ +#define INTEL_SIP_SMC_FUNCID_FCS_RANDOM_NUMBER 90 +#define INTEL_SIP_SMC_FCS_RANDOM_NUMBER \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_RANDOM_NUMBER) + +/** + * Request INTEL_SIP_SMC_FCS_CRYPTION + * Async call for data encryption and HMAC signature generation, or for + * data decryption and HMAC verification. + * + * Call INTEL_SIP_SMC_SERVICE_COMPLETED to get the output encrypted or + * decrypted data + * + * Call register usage: + * a0 INTEL_SIP_SMC_FCS_CRYPTION + * a1 cryption mode (1 for encryption and 0 for decryption) + * a2 physical address which stores to be encrypted or decrypted data + * a3 input data size + * a4 physical address which will hold the encrypted or decrypted output data + * a5 output data size + * a6-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_STATUS_ERROR or + * INTEL_SIP_SMC_STATUS_REJECTED + * a1-3 not used + */ +#define INTEL_SIP_SMC_FUNCID_FCS_CRYPTION 91 +#define INTEL_SIP_SMC_FCS_CRYPTION \ + INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_CRYPTION) + +/** + * Request INTEL_SIP_SMC_FCS_SERVICE_REQUEST + * Async call for authentication service of HPS software + * + * Call register usage: + * a0 INTEL_SIP_SMC_FCS_SERVICE_REQUEST + * a1 the physical address of data block + * a2 size of data block + * a3-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_ERROR or + * INTEL_SIP_SMC_REJECTED + * a1-a3 not used + */ +#define INTEL_SIP_SMC_FUNCID_FCS_SERVICE_REQUEST 92 +#define INTEL_SIP_SMC_FCS_SERVICE_REQUEST \ + INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_SERVICE_REQUEST) + +/** + * Request INTEL_SIP_SMC_FUNCID_FCS_SEND_CERTIFICATE + * Sync call to send a signed certificate + * + * Call register usage: + * a0 INTEL_SIP_SMC_FCS_SEND_CERTIFICATE + * a1 the physical address of CERTIFICATE block + * a2 size of data block + * a3-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FCS_REJECTED + * a1-a3 not used + */ +#define INTEL_SIP_SMC_FUNCID_FCS_SEND_CERTIFICATE 93 +#define INTEL_SIP_SMC_FCS_SEND_CERTIFICATE \ + INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_SEND_CERTIFICATE) + +/** + * Request INTEL_SIP_SMC_FCS_GET_PROVISION_DATA + * Sync call to dump all the fuses and key hashes + * + * Call register usage: + * a0 INTEL_SIP_SMC_FCS_GET_PROVISION_DATA + * a1 the physical address for firmware to write structure of fuse and + * key hashes + * a2-a7 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FCS_ERROR or + * INTEL_SIP_SMC_FCS_REJECTED + * a1 mailbox error + * a2 physical address for the structure of fuse and key hashes + * a3 the size of structure + * + */ +#define INTEL_SIP_SMC_FUNCID_FCS_GET_PROVISION_DATA 94 +#define INTEL_SIP_SMC_FCS_GET_PROVISION_DATA \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_GET_PROVISION_DATA) + +#endif |