diff options
Diffstat (limited to 'include/linux/iopoll.h')
| -rw-r--r-- | include/linux/iopoll.h | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h new file mode 100644 index 000000000..0417360a6 --- /dev/null +++ b/include/linux/iopoll.h @@ -0,0 +1,193 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2012-2014 The Linux Foundation. All rights reserved. + */ + +#ifndef _LINUX_IOPOLL_H +#define _LINUX_IOPOLL_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> + +/** + * read_poll_timeout - Periodically poll an address until a condition is + * met or a timeout occurs + * @op: accessor function (takes @args as its arguments) + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 + * tight-loops). Should be less than ~20ms since usleep_range + * is used (see Documentation/timers/timers-howto.rst). + * @timeout_us: Timeout in us, 0 means never timeout + * @sleep_before_read: if it is true, sleep @sleep_us before read. + * @args: arguments for @op poll + * + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + */ +#define read_poll_timeout(op, val, cond, sleep_us, timeout_us, \ + sleep_before_read, args...) \ +({ \ + u64 __timeout_us = (timeout_us); \ + unsigned long __sleep_us = (sleep_us); \ + ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \ + might_sleep_if((__sleep_us) != 0); \ + if (sleep_before_read && __sleep_us) \ + usleep_range((__sleep_us >> 2) + 1, __sleep_us); \ + for (;;) { \ + (val) = op(args); \ + if (cond) \ + break; \ + if (__timeout_us && \ + ktime_compare(ktime_get(), __timeout) > 0) { \ + (val) = op(args); \ + break; \ + } \ + if (__sleep_us) \ + usleep_range((__sleep_us >> 2) + 1, __sleep_us); \ + cpu_relax(); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +/** + * read_poll_timeout_atomic - Periodically poll an address until a condition is + * met or a timeout occurs + * @op: accessor function (takes @args as its arguments) + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @delay_us: Time to udelay between reads in us (0 tight-loops). Should + * be less than ~10us since udelay is used (see + * Documentation/timers/timers-howto.rst). + * @timeout_us: Timeout in us, 0 means never timeout + * @delay_before_read: if it is true, delay @delay_us before read. + * @args: arguments for @op poll + * + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @args is stored in @val. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + */ +#define read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, \ + delay_before_read, args...) \ +({ \ + u64 __timeout_us = (timeout_us); \ + unsigned long __delay_us = (delay_us); \ + ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \ + if (delay_before_read && __delay_us) \ + udelay(__delay_us); \ + for (;;) { \ + (val) = op(args); \ + if (cond) \ + break; \ + if (__timeout_us && \ + ktime_compare(ktime_get(), __timeout) > 0) { \ + (val) = op(args); \ + break; \ + } \ + if (__delay_us) \ + udelay(__delay_us); \ + cpu_relax(); \ + } \ + (cond) ? 0 : -ETIMEDOUT; \ +}) + +/** + * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs + * @op: accessor function (takes @addr as its only argument) + * @addr: Address to poll + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @sleep_us: Maximum time to sleep between reads in us (0 + * tight-loops). Should be less than ~20ms since usleep_range + * is used (see Documentation/timers/timers-howto.rst). + * @timeout_us: Timeout in us, 0 means never timeout + * + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @addr is stored in @val. Must not + * be called from atomic context if sleep_us or timeout_us are used. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + */ +#define readx_poll_timeout(op, addr, val, cond, sleep_us, timeout_us) \ + read_poll_timeout(op, val, cond, sleep_us, timeout_us, false, addr) + +/** + * readx_poll_timeout_atomic - Periodically poll an address until a condition is met or a timeout occurs + * @op: accessor function (takes @addr as its only argument) + * @addr: Address to poll + * @val: Variable to read the value into + * @cond: Break condition (usually involving @val) + * @delay_us: Time to udelay between reads in us (0 tight-loops). Should + * be less than ~10us since udelay is used (see + * Documentation/timers/timers-howto.rst). + * @timeout_us: Timeout in us, 0 means never timeout + * + * Returns 0 on success and -ETIMEDOUT upon a timeout. In either + * case, the last read value at @addr is stored in @val. + * + * When available, you'll probably want to use one of the specialized + * macros defined below rather than this macro directly. + */ +#define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \ + read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, false, addr) + +#define readb_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readb, addr, val, cond, delay_us, timeout_us) + +#define readb_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readb, addr, val, cond, delay_us, timeout_us) + +#define readw_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readw, addr, val, cond, delay_us, timeout_us) + +#define readw_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readw, addr, val, cond, delay_us, timeout_us) + +#define readl_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readl, addr, val, cond, delay_us, timeout_us) + +#define readl_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readl, addr, val, cond, delay_us, timeout_us) + +#define readq_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readq, addr, val, cond, delay_us, timeout_us) + +#define readq_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readq, addr, val, cond, delay_us, timeout_us) + +#define readb_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readb_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readb_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readb_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readw_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readw_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readw_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readw_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readl_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readl_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readl_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readl_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readq_relaxed_poll_timeout(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout(readq_relaxed, addr, val, cond, delay_us, timeout_us) + +#define readq_relaxed_poll_timeout_atomic(addr, val, cond, delay_us, timeout_us) \ + readx_poll_timeout_atomic(readq_relaxed, addr, val, cond, delay_us, timeout_us) + +#endif /* _LINUX_IOPOLL_H */ |