diff options
Diffstat (limited to 'include/linux/soc')
54 files changed, 6800 insertions, 0 deletions
diff --git a/include/linux/soc/actions/owl-sps.h b/include/linux/soc/actions/owl-sps.h new file mode 100644 index 000000000..33d0dbece --- /dev/null +++ b/include/linux/soc/actions/owl-sps.h @@ -0,0 +1,11 @@ +/* + * Copyright (c) 2017 Andreas Färber + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef SOC_ACTIONS_OWL_SPS_H +#define SOC_ACTIONS_OWL_SPS_H + +int owl_sps_set_pg(void __iomem *base, u32 pwr_mask, u32 ack_mask, bool enable); + +#endif diff --git a/include/linux/soc/amlogic/meson-canvas.h b/include/linux/soc/amlogic/meson-canvas.h new file mode 100644 index 000000000..0cb2a6050 --- /dev/null +++ b/include/linux/soc/amlogic/meson-canvas.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 BayLibre, SAS + */ +#ifndef __SOC_MESON_CANVAS_H +#define __SOC_MESON_CANVAS_H + +#include <linux/kernel.h> + +#define MESON_CANVAS_WRAP_NONE 0x00 +#define MESON_CANVAS_WRAP_X 0x01 +#define MESON_CANVAS_WRAP_Y 0x02 + +#define MESON_CANVAS_BLKMODE_LINEAR 0x00 +#define MESON_CANVAS_BLKMODE_32x32 0x01 +#define MESON_CANVAS_BLKMODE_64x64 0x02 + +#define MESON_CANVAS_ENDIAN_SWAP16 0x1 +#define MESON_CANVAS_ENDIAN_SWAP32 0x3 +#define MESON_CANVAS_ENDIAN_SWAP64 0x7 +#define MESON_CANVAS_ENDIAN_SWAP128 0xf + +struct device; +struct meson_canvas; + +/** + * meson_canvas_get() - get a canvas provider instance + * + * @dev: consumer device pointer + */ +struct meson_canvas *meson_canvas_get(struct device *dev); + +/** + * meson_canvas_alloc() - take ownership of a canvas + * + * @canvas: canvas provider instance retrieved from meson_canvas_get() + * @canvas_index: will be filled with the canvas ID + */ +int meson_canvas_alloc(struct meson_canvas *canvas, u8 *canvas_index); + +/** + * meson_canvas_free() - remove ownership from a canvas + * + * @canvas: canvas provider instance retrieved from meson_canvas_get() + * @canvas_index: canvas ID that was obtained via meson_canvas_alloc() + */ +int meson_canvas_free(struct meson_canvas *canvas, u8 canvas_index); + +/** + * meson_canvas_config() - configure a canvas + * + * @canvas: canvas provider instance retrieved from meson_canvas_get() + * @canvas_index: canvas ID that was obtained via meson_canvas_alloc() + * @addr: physical address to the pixel buffer + * @stride: width of the buffer + * @height: height of the buffer + * @wrap: undocumented + * @blkmode: block mode (linear, 32x32, 64x64) + * @endian: byte swapping (swap16, swap32, swap64, swap128) + */ +int meson_canvas_config(struct meson_canvas *canvas, u8 canvas_index, + u32 addr, u32 stride, u32 height, + unsigned int wrap, unsigned int blkmode, + unsigned int endian); + +#endif diff --git a/include/linux/soc/apple/rtkit.h b/include/linux/soc/apple/rtkit.h new file mode 100644 index 000000000..c9cabb679 --- /dev/null +++ b/include/linux/soc/apple/rtkit.h @@ -0,0 +1,167 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ +/* + * Apple RTKit IPC Library + * Copyright (C) The Asahi Linux Contributors + * + * Apple's SoCs come with various co-processors running their RTKit operating + * system. This protocol library is used by client drivers to use the + * features provided by them. + */ +#ifndef _LINUX_APPLE_RTKIT_H_ +#define _LINUX_APPLE_RTKIT_H_ + +#include <linux/device.h> +#include <linux/types.h> +#include <linux/mailbox_client.h> + +/* + * Struct to represent implementation-specific RTKit operations. + * + * @buffer: Shared memory buffer allocated inside normal RAM. + * @iomem: Shared memory buffer controlled by the co-processors. + * @size: Size of the shared memory buffer. + * @iova: Device VA of shared memory buffer. + * @is_mapped: Shared memory buffer is managed by the co-processor. + */ + +struct apple_rtkit_shmem { + void *buffer; + void __iomem *iomem; + size_t size; + dma_addr_t iova; + bool is_mapped; +}; + +/* + * Struct to represent implementation-specific RTKit operations. + * + * @crashed: Called when the co-processor has crashed. Runs in process + * context. + * @recv_message: Function called when a message from RTKit is received + * on a non-system endpoint. Called from a worker thread. + * @recv_message_early: + * Like recv_message, but called from atomic context. It + * should return true if it handled the message. If it + * returns false, the message will be passed on to the + * worker thread. + * @shmem_setup: Setup shared memory buffer. If bfr.is_iomem is true the + * buffer is managed by the co-processor and needs to be mapped. + * Otherwise the buffer is managed by Linux and needs to be + * allocated. If not specified dma_alloc_coherent is used. + * Called in process context. + * @shmem_destroy: Undo the shared memory buffer setup in shmem_setup. If not + * specified dma_free_coherent is used. Called in process + * context. + */ +struct apple_rtkit_ops { + void (*crashed)(void *cookie); + void (*recv_message)(void *cookie, u8 endpoint, u64 message); + bool (*recv_message_early)(void *cookie, u8 endpoint, u64 message); + int (*shmem_setup)(void *cookie, struct apple_rtkit_shmem *bfr); + void (*shmem_destroy)(void *cookie, struct apple_rtkit_shmem *bfr); +}; + +struct apple_rtkit; + +/* + * Initializes the internal state required to handle RTKit. This + * should usually be called within _probe. + * + * @dev: Pointer to the device node this coprocessor is assocated with + * @cookie: opaque cookie passed to all functions defined in rtkit_ops + * @mbox_name: mailbox name used to communicate with the co-processor + * @mbox_idx: mailbox index to be used if mbox_name is NULL + * @ops: pointer to rtkit_ops to be used for this co-processor + */ +struct apple_rtkit *devm_apple_rtkit_init(struct device *dev, void *cookie, + const char *mbox_name, int mbox_idx, + const struct apple_rtkit_ops *ops); + +/* + * Reinitialize internal structures. Must only be called with the co-processor + * is held in reset. + */ +int apple_rtkit_reinit(struct apple_rtkit *rtk); + +/* + * Handle RTKit's boot process. Should be called after the CPU of the + * co-processor has been started. + */ +int apple_rtkit_boot(struct apple_rtkit *rtk); + +/* + * Quiesce the co-processor. + */ +int apple_rtkit_quiesce(struct apple_rtkit *rtk); + +/* + * Wake the co-processor up from hibernation mode. + */ +int apple_rtkit_wake(struct apple_rtkit *rtk); + +/* + * Shutdown the co-processor + */ +int apple_rtkit_shutdown(struct apple_rtkit *rtk); + +/* + * Checks if RTKit is running and ready to handle messages. + */ +bool apple_rtkit_is_running(struct apple_rtkit *rtk); + +/* + * Checks if RTKit has crashed. + */ +bool apple_rtkit_is_crashed(struct apple_rtkit *rtk); + +/* + * Starts an endpoint. Must be called after boot but before any messages can be + * sent or received from that endpoint. + */ +int apple_rtkit_start_ep(struct apple_rtkit *rtk, u8 endpoint); + +/* + * Send a message to the given endpoint. + * + * @rtk: RTKit reference + * @ep: target endpoint + * @message: message to be sent + * @completeion: will be completed once the message has been submitted + * to the hardware FIFO. Can be NULL. + * @atomic: if set to true this function can be called from atomic + * context. + */ +int apple_rtkit_send_message(struct apple_rtkit *rtk, u8 ep, u64 message, + struct completion *completion, bool atomic); + +/* + * Send a message to the given endpoint and wait until it has been submitted + * to the hardware FIFO. + * Will return zero on success and a negative error code on failure + * (e.g. -ETIME when the message couldn't be written within the given + * timeout) + * + * @rtk: RTKit reference + * @ep: target endpoint + * @message: message to be sent + * @timeout: timeout in milliseconds to allow the message transmission + * to be completed + * @atomic: if set to true this function can be called from atomic + * context. + */ +int apple_rtkit_send_message_wait(struct apple_rtkit *rtk, u8 ep, u64 message, + unsigned long timeout, bool atomic); + +/* + * Process incoming messages in atomic context. + * This only guarantees that messages arrive as far as the recv_message_early + * callback; drivers expecting to handle incoming messages synchronously + * by calling this function must do it that way. + * Will return 1 if some data was processed, 0 if none was, or a + * negative error code on failure. + * + * @rtk: RTKit reference + */ +int apple_rtkit_poll(struct apple_rtkit *rtk); + +#endif /* _LINUX_APPLE_RTKIT_H_ */ diff --git a/include/linux/soc/apple/sart.h b/include/linux/soc/apple/sart.h new file mode 100644 index 000000000..2249bf6cd --- /dev/null +++ b/include/linux/soc/apple/sart.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ +/* + * Apple SART device driver + * Copyright (C) The Asahi Linux Contributors + * + * Apple SART is a simple address filter for DMA transactions. + * Regions of physical memory must be added to the SART's allow + * list before any DMA can target these. Unlike a proper + * IOMMU no remapping can be done. + */ + +#ifndef _LINUX_SOC_APPLE_SART_H_ +#define _LINUX_SOC_APPLE_SART_H_ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/types.h> + +struct apple_sart; + +/* + * Get a reference to the SART attached to dev. + * + * Looks for the phandle reference in apple,sart and returns a pointer + * to the corresponding apple_sart struct to be used with + * apple_sart_add_allowed_region and apple_sart_remove_allowed_region. + */ +struct apple_sart *devm_apple_sart_get(struct device *dev); + +/* + * Adds the region [paddr, paddr+size] to the DMA allow list. + * + * @sart: SART reference + * @paddr: Start address of the region to be used for DMA + * @size: Size of the region to be used for DMA. + */ +int apple_sart_add_allowed_region(struct apple_sart *sart, phys_addr_t paddr, + size_t size); + +/* + * Removes the region [paddr, paddr+size] from the DMA allow list. + * + * Note that exact same paddr and size used for apple_sart_add_allowed_region + * have to be passed. + * + * @sart: SART reference + * @paddr: Start address of the region no longer used for DMA + * @size: Size of the region no longer used for DMA. + */ +int apple_sart_remove_allowed_region(struct apple_sart *sart, phys_addr_t paddr, + size_t size); + +#endif /* _LINUX_SOC_APPLE_SART_H_ */ diff --git a/include/linux/soc/brcmstb/brcmstb.h b/include/linux/soc/brcmstb/brcmstb.h new file mode 100644 index 000000000..f2b768852 --- /dev/null +++ b/include/linux/soc/brcmstb/brcmstb.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __BRCMSTB_SOC_H +#define __BRCMSTB_SOC_H + +#include <linux/kconfig.h> + +static inline u32 BRCM_ID(u32 reg) +{ + return reg >> 28 ? reg >> 16 : reg >> 8; +} + +static inline u32 BRCM_REV(u32 reg) +{ + return reg & 0xff; +} + +#if IS_ENABLED(CONFIG_SOC_BRCMSTB) + +/* + * Helper functions for getting family or product id from the + * SoC driver. + */ +u32 brcmstb_get_family_id(void); +u32 brcmstb_get_product_id(void); + +#else +static inline u32 brcmstb_get_family_id(void) +{ + return 0; +} + +static inline u32 brcmstb_get_product_id(void) +{ + return 0; +} +#endif + +#endif /* __BRCMSTB_SOC_H */ diff --git a/include/linux/soc/cirrus/ep93xx.h b/include/linux/soc/cirrus/ep93xx.h new file mode 100644 index 000000000..56fbe2dc5 --- /dev/null +++ b/include/linux/soc/cirrus/ep93xx.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _SOC_EP93XX_H +#define _SOC_EP93XX_H + +struct platform_device; + +#define EP93XX_CHIP_REV_D0 3 +#define EP93XX_CHIP_REV_D1 4 +#define EP93XX_CHIP_REV_E0 5 +#define EP93XX_CHIP_REV_E1 6 +#define EP93XX_CHIP_REV_E2 7 + +#ifdef CONFIG_ARCH_EP93XX +int ep93xx_pwm_acquire_gpio(struct platform_device *pdev); +void ep93xx_pwm_release_gpio(struct platform_device *pdev); +int ep93xx_ide_acquire_gpio(struct platform_device *pdev); +void ep93xx_ide_release_gpio(struct platform_device *pdev); +int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); +void ep93xx_keypad_release_gpio(struct platform_device *pdev); +int ep93xx_i2s_acquire(void); +void ep93xx_i2s_release(void); +unsigned int ep93xx_chip_revision(void); + +#else +static inline int ep93xx_pwm_acquire_gpio(struct platform_device *pdev) { return 0; } +static inline void ep93xx_pwm_release_gpio(struct platform_device *pdev) {} +static inline int ep93xx_ide_acquire_gpio(struct platform_device *pdev) { return 0; } +static inline void ep93xx_ide_release_gpio(struct platform_device *pdev) {} +static inline int ep93xx_keypad_acquire_gpio(struct platform_device *pdev) { return 0; } +static inline void ep93xx_keypad_release_gpio(struct platform_device *pdev) {} +static inline int ep93xx_i2s_acquire(void) { return 0; } +static inline void ep93xx_i2s_release(void) {} +static inline unsigned int ep93xx_chip_revision(void) { return 0; } + +#endif + +#endif diff --git a/include/linux/soc/dove/pmu.h b/include/linux/soc/dove/pmu.h new file mode 100644 index 000000000..1955c01de --- /dev/null +++ b/include/linux/soc/dove/pmu.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef LINUX_SOC_DOVE_PMU_H +#define LINUX_SOC_DOVE_PMU_H + +#include <linux/types.h> + +struct dove_pmu_domain_initdata { + u32 pwr_mask; + u32 rst_mask; + u32 iso_mask; + const char *name; +}; + +struct dove_pmu_initdata { + void __iomem *pmc_base; + void __iomem *pmu_base; + int irq; + int irq_domain_start; + const struct dove_pmu_domain_initdata *domains; +}; + +int dove_init_pmu_legacy(const struct dove_pmu_initdata *); + +int dove_init_pmu(void); + +#endif diff --git a/include/linux/soc/ixp4xx/cpu.h b/include/linux/soc/ixp4xx/cpu.h new file mode 100644 index 000000000..f526ac33a --- /dev/null +++ b/include/linux/soc/ixp4xx/cpu.h @@ -0,0 +1,120 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IXP4XX cpu type detection + * + * Copyright (C) 2007 MontaVista Software, Inc. + */ + +#ifndef __SOC_IXP4XX_CPU_H__ +#define __SOC_IXP4XX_CPU_H__ + +#include <linux/io.h> +#include <linux/regmap.h> +#ifdef CONFIG_ARM +#include <asm/cputype.h> +#endif + +/* Processor id value in CP15 Register 0 */ +#define IXP42X_PROCESSOR_ID_VALUE 0x690541c0 /* including unused 0x690541Ex */ +#define IXP42X_PROCESSOR_ID_MASK 0xffffffc0 + +#define IXP43X_PROCESSOR_ID_VALUE 0x69054040 +#define IXP43X_PROCESSOR_ID_MASK 0xfffffff0 + +#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */ +#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0 + +/* Feature register in the expansion bus controller */ +#define IXP4XX_EXP_CNFG2 0x2c + +/* "fuse" bits of IXP_EXP_CFG2 */ +/* All IXP4xx CPUs */ +#define IXP4XX_FEATURE_RCOMP (1 << 0) +#define IXP4XX_FEATURE_USB_DEVICE (1 << 1) +#define IXP4XX_FEATURE_HASH (1 << 2) +#define IXP4XX_FEATURE_AES (1 << 3) +#define IXP4XX_FEATURE_DES (1 << 4) +#define IXP4XX_FEATURE_HDLC (1 << 5) +#define IXP4XX_FEATURE_AAL (1 << 6) +#define IXP4XX_FEATURE_HSS (1 << 7) +#define IXP4XX_FEATURE_UTOPIA (1 << 8) +#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9) +#define IXP4XX_FEATURE_NPEC_ETH (1 << 10) +#define IXP4XX_FEATURE_RESET_NPEA (1 << 11) +#define IXP4XX_FEATURE_RESET_NPEB (1 << 12) +#define IXP4XX_FEATURE_RESET_NPEC (1 << 13) +#define IXP4XX_FEATURE_PCI (1 << 14) +#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16) +#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22) +#define IXP42X_FEATURE_MASK (IXP4XX_FEATURE_RCOMP | \ + IXP4XX_FEATURE_USB_DEVICE | \ + IXP4XX_FEATURE_HASH | \ + IXP4XX_FEATURE_AES | \ + IXP4XX_FEATURE_DES | \ + IXP4XX_FEATURE_HDLC | \ + IXP4XX_FEATURE_AAL | \ + IXP4XX_FEATURE_HSS | \ + IXP4XX_FEATURE_UTOPIA | \ + IXP4XX_FEATURE_NPEB_ETH0 | \ + IXP4XX_FEATURE_NPEC_ETH | \ + IXP4XX_FEATURE_RESET_NPEA | \ + IXP4XX_FEATURE_RESET_NPEB | \ + IXP4XX_FEATURE_RESET_NPEC | \ + IXP4XX_FEATURE_PCI | \ + IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \ + IXP4XX_FEATURE_XSCALE_MAX_FREQ) + + +/* IXP43x/46x CPUs */ +#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15) +#define IXP4XX_FEATURE_USB_HOST (1 << 18) +#define IXP4XX_FEATURE_NPEA_ETH (1 << 19) +#define IXP43X_FEATURE_MASK (IXP42X_FEATURE_MASK | \ + IXP4XX_FEATURE_ECC_TIMESYNC | \ + IXP4XX_FEATURE_USB_HOST | \ + IXP4XX_FEATURE_NPEA_ETH) + +/* IXP46x CPU (including IXP455) only */ +#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20) +#define IXP4XX_FEATURE_RSA (1 << 21) +#define IXP46X_FEATURE_MASK (IXP43X_FEATURE_MASK | \ + IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \ + IXP4XX_FEATURE_RSA) + +#ifdef CONFIG_ARCH_IXP4XX +#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \ + IXP42X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \ + IXP43X_PROCESSOR_ID_VALUE) +#define cpu_is_ixp46x() ((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \ + IXP46X_PROCESSOR_ID_VALUE) +static inline u32 cpu_ixp4xx_features(struct regmap *rmap) +{ + u32 val; + + regmap_read(rmap, IXP4XX_EXP_CNFG2, &val); + /* For some reason this register is inverted */ + val = ~val; + if (cpu_is_ixp42x_rev_a0()) + return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | + IXP4XX_FEATURE_AES); + if (cpu_is_ixp42x()) + return val & IXP42X_FEATURE_MASK; + if (cpu_is_ixp43x()) + return val & IXP43X_FEATURE_MASK; + return val & IXP46X_FEATURE_MASK; +} +#else +#define cpu_is_ixp42x_rev_a0() 0 +#define cpu_is_ixp42x() 0 +#define cpu_is_ixp43x() 0 +#define cpu_is_ixp46x() 0 +static inline u32 cpu_ixp4xx_features(struct regmap *rmap) +{ + return 0; +} +#endif + +#endif /* _ASM_ARCH_CPU_H */ diff --git a/include/linux/soc/ixp4xx/npe.h b/include/linux/soc/ixp4xx/npe.h new file mode 100644 index 000000000..9efeac777 --- /dev/null +++ b/include/linux/soc/ixp4xx/npe.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __IXP4XX_NPE_H +#define __IXP4XX_NPE_H + +#include <linux/kernel.h> +#include <linux/regmap.h> + +extern const char *npe_names[]; + +struct npe_regs { + u32 exec_addr, exec_data, exec_status_cmd, exec_count; + u32 action_points[4]; + u32 watchpoint_fifo, watch_count; + u32 profile_count; + u32 messaging_status, messaging_control; + u32 mailbox_status, /*messaging_*/ in_out_fifo; +}; + +struct npe { + struct npe_regs __iomem *regs; + struct regmap *rmap; + int id; + int valid; +}; + + +static inline const char *npe_name(struct npe *npe) +{ + return npe_names[npe->id]; +} + +int npe_running(struct npe *npe); +int npe_send_message(struct npe *npe, const void *msg, const char *what); +int npe_recv_message(struct npe *npe, void *msg, const char *what); +int npe_send_recv_message(struct npe *npe, void *msg, const char *what); +int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); +struct npe *npe_request(unsigned id); +void npe_release(struct npe *npe); + +#endif /* __IXP4XX_NPE_H */ diff --git a/include/linux/soc/ixp4xx/qmgr.h b/include/linux/soc/ixp4xx/qmgr.h new file mode 100644 index 000000000..2c0f433a3 --- /dev/null +++ b/include/linux/soc/ixp4xx/qmgr.h @@ -0,0 +1,88 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl> + */ + +#ifndef IXP4XX_QMGR_H +#define IXP4XX_QMGR_H + +#include <linux/io.h> +#include <linux/kernel.h> + +#define DEBUG_QMGR 0 + +#define HALF_QUEUES 32 +#define QUEUES 64 +#define MAX_QUEUE_LENGTH 4 /* in dwords */ + +#define QUEUE_STAT1_EMPTY 1 /* queue status bits */ +#define QUEUE_STAT1_NEARLY_EMPTY 2 +#define QUEUE_STAT1_NEARLY_FULL 4 +#define QUEUE_STAT1_FULL 8 +#define QUEUE_STAT2_UNDERFLOW 1 +#define QUEUE_STAT2_OVERFLOW 2 + +#define QUEUE_WATERMARK_0_ENTRIES 0 +#define QUEUE_WATERMARK_1_ENTRY 1 +#define QUEUE_WATERMARK_2_ENTRIES 2 +#define QUEUE_WATERMARK_4_ENTRIES 3 +#define QUEUE_WATERMARK_8_ENTRIES 4 +#define QUEUE_WATERMARK_16_ENTRIES 5 +#define QUEUE_WATERMARK_32_ENTRIES 6 +#define QUEUE_WATERMARK_64_ENTRIES 7 + +/* queue interrupt request conditions */ +#define QUEUE_IRQ_SRC_EMPTY 0 +#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1 +#define QUEUE_IRQ_SRC_NEARLY_FULL 2 +#define QUEUE_IRQ_SRC_FULL 3 +#define QUEUE_IRQ_SRC_NOT_EMPTY 4 +#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5 +#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6 +#define QUEUE_IRQ_SRC_NOT_FULL 7 + +struct qmgr_regs { + u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */ + u32 stat1[4]; /* 0x400 - 0x40F */ + u32 stat2[2]; /* 0x410 - 0x417 */ + u32 statne_h; /* 0x418 - queue nearly empty */ + u32 statf_h; /* 0x41C - queue full */ + u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */ + u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */ + u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */ + u32 reserved[1776]; + u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */ +}; + +void qmgr_put_entry(unsigned int queue, u32 val); +u32 qmgr_get_entry(unsigned int queue); +int qmgr_stat_empty(unsigned int queue); +int qmgr_stat_below_low_watermark(unsigned int queue); +int qmgr_stat_full(unsigned int queue); +int qmgr_stat_overflow(unsigned int queue); +void qmgr_release_queue(unsigned int queue); +void qmgr_set_irq(unsigned int queue, int src, + void (*handler)(void *pdev), void *pdev); +void qmgr_enable_irq(unsigned int queue); +void qmgr_disable_irq(unsigned int queue); + +/* request_ and release_queue() must be called from non-IRQ context */ + +#if DEBUG_QMGR +extern char qmgr_queue_descs[QUEUES][32]; + +int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark, + const char *desc_format, const char* name); +#else +int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */, + unsigned int nearly_empty_watermark, + unsigned int nearly_full_watermark); +#define qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark, desc_format, name) \ + __qmgr_request_queue(queue, len, nearly_empty_watermark, \ + nearly_full_watermark) +#endif + +#endif diff --git a/include/linux/soc/marvell/octeontx2/asm.h b/include/linux/soc/marvell/octeontx2/asm.h new file mode 100644 index 000000000..d683251a0 --- /dev/null +++ b/include/linux/soc/marvell/octeontx2/asm.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0-only + * Copyright (C) 2020 Marvell. + */ + +#ifndef __SOC_OTX2_ASM_H +#define __SOC_OTX2_ASM_H + +#include <linux/types.h> +#if defined(CONFIG_ARM64) +/* + * otx2_lmt_flush is used for LMT store operation. + * On octeontx2 platform CPT instruction enqueue and + * NIX packet send are only possible via LMTST + * operations and it uses LDEOR instruction targeting + * the coprocessor address. + */ +#define otx2_lmt_flush(ioaddr) \ +({ \ + u64 result = 0; \ + __asm__ volatile(".cpu generic+lse\n" \ + "ldeor xzr, %x[rf], [%[rs]]" \ + : [rf]"=r" (result) \ + : [rs]"r" (ioaddr)); \ + (result); \ +}) +/* + * STEORL store to memory with release semantics. + * This will avoid using DMB barrier after each LMTST + * operation. + */ +#define cn10k_lmt_flush(val, addr) \ +({ \ + __asm__ volatile(".cpu generic+lse\n" \ + "steorl %x[rf],[%[rs]]" \ + : [rf] "+r"(val) \ + : [rs] "r"(addr)); \ +}) + +static inline u64 otx2_atomic64_fetch_add(u64 incr, u64 *ptr) +{ + u64 result; + + asm volatile (".cpu generic+lse\n" + "ldadda %x[i], %x[r], [%[b]]" + : [r] "=r" (result), "+m" (*ptr) + : [i] "r" (incr), [b] "r" (ptr) + : "memory"); + return result; +} + +#else +#define otx2_lmt_flush(ioaddr) ({ 0; }) +#define cn10k_lmt_flush(val, addr) ({ addr = val; }) +#define otx2_atomic64_fetch_add(incr, ptr) ({ incr; }) +#endif + +#endif /* __SOC_OTX2_ASM_H */ diff --git a/include/linux/soc/mediatek/infracfg.h b/include/linux/soc/mediatek/infracfg.h new file mode 100644 index 000000000..50804ac74 --- /dev/null +++ b/include/linux/soc/mediatek/infracfg.h @@ -0,0 +1,290 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_MEDIATEK_INFRACFG_H +#define __SOC_MEDIATEK_INFRACFG_H + +#define MT8195_TOP_AXI_PROT_EN_STA1 0x228 +#define MT8195_TOP_AXI_PROT_EN_1_STA1 0x258 +#define MT8195_TOP_AXI_PROT_EN_SET 0x2a0 +#define MT8195_TOP_AXI_PROT_EN_CLR 0x2a4 +#define MT8195_TOP_AXI_PROT_EN_1_SET 0x2a8 +#define MT8195_TOP_AXI_PROT_EN_1_CLR 0x2ac +#define MT8195_TOP_AXI_PROT_EN_MM_SET 0x2d4 +#define MT8195_TOP_AXI_PROT_EN_MM_CLR 0x2d8 +#define MT8195_TOP_AXI_PROT_EN_MM_STA1 0x2ec +#define MT8195_TOP_AXI_PROT_EN_2_SET 0x714 +#define MT8195_TOP_AXI_PROT_EN_2_CLR 0x718 +#define MT8195_TOP_AXI_PROT_EN_2_STA1 0x724 +#define MT8195_TOP_AXI_PROT_EN_VDNR_SET 0xb84 +#define MT8195_TOP_AXI_PROT_EN_VDNR_CLR 0xb88 +#define MT8195_TOP_AXI_PROT_EN_VDNR_STA1 0xb90 +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_SET 0xba4 +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_CLR 0xba8 +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_STA1 0xbb0 +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_SET 0xbb8 +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_CLR 0xbbc +#define MT8195_TOP_AXI_PROT_EN_VDNR_2_STA1 0xbc4 +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_SET 0xbcc +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_CLR 0xbd0 +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_STA1 0xbd8 +#define MT8195_TOP_AXI_PROT_EN_MM_2_SET 0xdcc +#define MT8195_TOP_AXI_PROT_EN_MM_2_CLR 0xdd0 +#define MT8195_TOP_AXI_PROT_EN_MM_2_STA1 0xdd8 + +#define MT8195_TOP_AXI_PROT_EN_VDOSYS0 BIT(6) +#define MT8195_TOP_AXI_PROT_EN_VPPSYS0 BIT(10) +#define MT8195_TOP_AXI_PROT_EN_MFG1 BIT(11) +#define MT8195_TOP_AXI_PROT_EN_MFG1_2ND GENMASK(22, 21) +#define MT8195_TOP_AXI_PROT_EN_VPPSYS0_2ND BIT(23) +#define MT8195_TOP_AXI_PROT_EN_1_MFG1 GENMASK(20, 19) +#define MT8195_TOP_AXI_PROT_EN_1_CAM BIT(22) +#define MT8195_TOP_AXI_PROT_EN_2_CAM BIT(0) +#define MT8195_TOP_AXI_PROT_EN_2_MFG1_2ND GENMASK(6, 5) +#define MT8195_TOP_AXI_PROT_EN_2_MFG1 BIT(7) +#define MT8195_TOP_AXI_PROT_EN_2_AUDIO (BIT(9) | BIT(11)) +#define MT8195_TOP_AXI_PROT_EN_2_ADSP (BIT(12) | GENMASK(16, 14)) +#define MT8195_TOP_AXI_PROT_EN_MM_CAM (BIT(0) | BIT(2) | BIT(4)) +#define MT8195_TOP_AXI_PROT_EN_MM_IPE BIT(1) +#define MT8195_TOP_AXI_PROT_EN_MM_IMG BIT(3) +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS0 GENMASK(21, 17) +#define MT8195_TOP_AXI_PROT_EN_MM_VPPSYS1 GENMASK(8, 5) +#define MT8195_TOP_AXI_PROT_EN_MM_VENC (BIT(9) | BIT(11)) +#define MT8195_TOP_AXI_PROT_EN_MM_VENC_CORE1 (BIT(10) | BIT(12)) +#define MT8195_TOP_AXI_PROT_EN_MM_VDEC0 BIT(13) +#define MT8195_TOP_AXI_PROT_EN_MM_VDEC1 BIT(14) +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS1_2ND BIT(22) +#define MT8195_TOP_AXI_PROT_EN_MM_VPPSYS1_2ND BIT(23) +#define MT8195_TOP_AXI_PROT_EN_MM_CAM_2ND BIT(24) +#define MT8195_TOP_AXI_PROT_EN_MM_IMG_2ND BIT(25) +#define MT8195_TOP_AXI_PROT_EN_MM_VENC_2ND BIT(26) +#define MT8195_TOP_AXI_PROT_EN_MM_WPESYS BIT(27) +#define MT8195_TOP_AXI_PROT_EN_MM_VDEC0_2ND BIT(28) +#define MT8195_TOP_AXI_PROT_EN_MM_VDEC1_2ND BIT(29) +#define MT8195_TOP_AXI_PROT_EN_MM_VDOSYS1 GENMASK(31, 30) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VPPSYS0_2ND (GENMASK(1, 0) | BIT(4) | BIT(11)) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VENC BIT(2) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VENC_CORE1 (BIT(3) | BIT(15)) +#define MT8195_TOP_AXI_PROT_EN_MM_2_CAM (BIT(5) | BIT(17)) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VPPSYS1 (GENMASK(7, 6) | BIT(18)) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VPPSYS0 GENMASK(9, 8) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDOSYS1 BIT(10) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC2_2ND BIT(12) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC0_2ND BIT(13) +#define MT8195_TOP_AXI_PROT_EN_MM_2_WPESYS_2ND BIT(14) +#define MT8195_TOP_AXI_PROT_EN_MM_2_IPE BIT(16) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC2 BIT(21) +#define MT8195_TOP_AXI_PROT_EN_MM_2_VDEC0 BIT(22) +#define MT8195_TOP_AXI_PROT_EN_MM_2_WPESYS GENMASK(24, 23) +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_EPD_TX BIT(1) +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_DP_TX BIT(2) +#define MT8195_TOP_AXI_PROT_EN_VDNR_PCIE_MAC_P0 (BIT(11) | BIT(28)) +#define MT8195_TOP_AXI_PROT_EN_VDNR_PCIE_MAC_P1 (BIT(12) | BIT(29)) +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_PCIE_MAC_P0 BIT(13) +#define MT8195_TOP_AXI_PROT_EN_VDNR_1_PCIE_MAC_P1 BIT(14) +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_MFG1 (BIT(17) | BIT(19)) +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VPPSYS0 BIT(20) +#define MT8195_TOP_AXI_PROT_EN_SUB_INFRA_VDNR_VDOSYS0 BIT(21) + +#define MT8192_TOP_AXI_PROT_EN_STA1 0x228 +#define MT8192_TOP_AXI_PROT_EN_1_STA1 0x258 +#define MT8192_TOP_AXI_PROT_EN_SET 0x2a0 +#define MT8192_TOP_AXI_PROT_EN_CLR 0x2a4 +#define MT8192_TOP_AXI_PROT_EN_1_SET 0x2a8 +#define MT8192_TOP_AXI_PROT_EN_1_CLR 0x2ac +#define MT8192_TOP_AXI_PROT_EN_MM_SET 0x2d4 +#define MT8192_TOP_AXI_PROT_EN_MM_CLR 0x2d8 +#define MT8192_TOP_AXI_PROT_EN_MM_STA1 0x2ec +#define MT8192_TOP_AXI_PROT_EN_2_SET 0x714 +#define MT8192_TOP_AXI_PROT_EN_2_CLR 0x718 +#define MT8192_TOP_AXI_PROT_EN_2_STA1 0x724 +#define MT8192_TOP_AXI_PROT_EN_VDNR_SET 0xb84 +#define MT8192_TOP_AXI_PROT_EN_VDNR_CLR 0xb88 +#define MT8192_TOP_AXI_PROT_EN_VDNR_STA1 0xb90 +#define MT8192_TOP_AXI_PROT_EN_MM_2_SET 0xdcc +#define MT8192_TOP_AXI_PROT_EN_MM_2_CLR 0xdd0 +#define MT8192_TOP_AXI_PROT_EN_MM_2_STA1 0xdd8 + +#define MT8192_TOP_AXI_PROT_EN_DISP (BIT(6) | BIT(23)) +#define MT8192_TOP_AXI_PROT_EN_CONN (BIT(13) | BIT(18)) +#define MT8192_TOP_AXI_PROT_EN_CONN_2ND BIT(14) +#define MT8192_TOP_AXI_PROT_EN_MFG1 GENMASK(22, 21) +#define MT8192_TOP_AXI_PROT_EN_1_CONN BIT(10) +#define MT8192_TOP_AXI_PROT_EN_1_MFG1 BIT(21) +#define MT8192_TOP_AXI_PROT_EN_1_CAM BIT(22) +#define MT8192_TOP_AXI_PROT_EN_2_CAM BIT(0) +#define MT8192_TOP_AXI_PROT_EN_2_ADSP BIT(3) +#define MT8192_TOP_AXI_PROT_EN_2_AUDIO BIT(4) +#define MT8192_TOP_AXI_PROT_EN_2_MFG1 GENMASK(6, 5) +#define MT8192_TOP_AXI_PROT_EN_2_MFG1_2ND BIT(7) +#define MT8192_TOP_AXI_PROT_EN_MM_CAM (BIT(0) | BIT(2)) +#define MT8192_TOP_AXI_PROT_EN_MM_DISP (BIT(0) | BIT(2) | \ + BIT(10) | BIT(12) | \ + BIT(14) | BIT(16) | \ + BIT(24) | BIT(26)) +#define MT8192_TOP_AXI_PROT_EN_MM_CAM_2ND (BIT(1) | BIT(3)) +#define MT8192_TOP_AXI_PROT_EN_MM_DISP_2ND (BIT(1) | BIT(3) | \ + BIT(15) | BIT(17) | \ + BIT(25) | BIT(27)) +#define MT8192_TOP_AXI_PROT_EN_MM_ISP2 BIT(14) +#define MT8192_TOP_AXI_PROT_EN_MM_ISP2_2ND BIT(15) +#define MT8192_TOP_AXI_PROT_EN_MM_IPE BIT(16) +#define MT8192_TOP_AXI_PROT_EN_MM_IPE_2ND BIT(17) +#define MT8192_TOP_AXI_PROT_EN_MM_VDEC BIT(24) +#define MT8192_TOP_AXI_PROT_EN_MM_VDEC_2ND BIT(25) +#define MT8192_TOP_AXI_PROT_EN_MM_VENC BIT(26) +#define MT8192_TOP_AXI_PROT_EN_MM_VENC_2ND BIT(27) +#define MT8192_TOP_AXI_PROT_EN_MM_2_ISP BIT(8) +#define MT8192_TOP_AXI_PROT_EN_MM_2_DISP (BIT(8) | BIT(12)) +#define MT8192_TOP_AXI_PROT_EN_MM_2_ISP_2ND BIT(9) +#define MT8192_TOP_AXI_PROT_EN_MM_2_DISP_2ND (BIT(9) | BIT(13)) +#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP BIT(12) +#define MT8192_TOP_AXI_PROT_EN_MM_2_MDP_2ND BIT(13) +#define MT8192_TOP_AXI_PROT_EN_VDNR_CAM BIT(21) + +#define MT8186_TOP_AXI_PROT_EN_SET (0x2A0) +#define MT8186_TOP_AXI_PROT_EN_CLR (0x2A4) +#define MT8186_TOP_AXI_PROT_EN_STA (0x228) +#define MT8186_TOP_AXI_PROT_EN_1_SET (0x2A8) +#define MT8186_TOP_AXI_PROT_EN_1_CLR (0x2AC) +#define MT8186_TOP_AXI_PROT_EN_1_STA (0x258) +#define MT8186_TOP_AXI_PROT_EN_2_SET (0x2B0) +#define MT8186_TOP_AXI_PROT_EN_2_CLR (0x2B4) +#define MT8186_TOP_AXI_PROT_EN_2_STA (0x26C) +#define MT8186_TOP_AXI_PROT_EN_3_SET (0x2B8) +#define MT8186_TOP_AXI_PROT_EN_3_CLR (0x2BC) +#define MT8186_TOP_AXI_PROT_EN_3_STA (0x2C8) + +/* MFG1 */ +#define MT8186_TOP_AXI_PROT_EN_1_MFG1_STEP1 (GENMASK(28, 27)) +#define MT8186_TOP_AXI_PROT_EN_MFG1_STEP2 (GENMASK(22, 21)) +#define MT8186_TOP_AXI_PROT_EN_MFG1_STEP3 (BIT(25)) +#define MT8186_TOP_AXI_PROT_EN_1_MFG1_STEP4 (BIT(29)) +/* DIS */ +#define MT8186_TOP_AXI_PROT_EN_1_DIS_STEP1 (GENMASK(12, 11)) +#define MT8186_TOP_AXI_PROT_EN_DIS_STEP2 (GENMASK(2, 1) | GENMASK(11, 10)) +/* IMG */ +#define MT8186_TOP_AXI_PROT_EN_1_IMG_STEP1 (BIT(23)) +#define MT8186_TOP_AXI_PROT_EN_1_IMG_STEP2 (BIT(15)) +/* IPE */ +#define MT8186_TOP_AXI_PROT_EN_1_IPE_STEP1 (BIT(24)) +#define MT8186_TOP_AXI_PROT_EN_1_IPE_STEP2 (BIT(16)) +/* CAM */ +#define MT8186_TOP_AXI_PROT_EN_1_CAM_STEP1 (GENMASK(22, 21)) +#define MT8186_TOP_AXI_PROT_EN_1_CAM_STEP2 (GENMASK(14, 13)) +/* VENC */ +#define MT8186_TOP_AXI_PROT_EN_1_VENC_STEP1 (BIT(31)) +#define MT8186_TOP_AXI_PROT_EN_1_VENC_STEP2 (BIT(19)) +/* VDEC */ +#define MT8186_TOP_AXI_PROT_EN_1_VDEC_STEP1 (BIT(30)) +#define MT8186_TOP_AXI_PROT_EN_1_VDEC_STEP2 (BIT(17)) +/* WPE */ +#define MT8186_TOP_AXI_PROT_EN_2_WPE_STEP1 (BIT(17)) +#define MT8186_TOP_AXI_PROT_EN_2_WPE_STEP2 (BIT(16)) +/* CONN_ON */ +#define MT8186_TOP_AXI_PROT_EN_1_CONN_ON_STEP1 (BIT(18)) +#define MT8186_TOP_AXI_PROT_EN_CONN_ON_STEP2 (BIT(14)) +#define MT8186_TOP_AXI_PROT_EN_CONN_ON_STEP3 (BIT(13)) +#define MT8186_TOP_AXI_PROT_EN_CONN_ON_STEP4 (BIT(16)) +/* ADSP_TOP */ +#define MT8186_TOP_AXI_PROT_EN_3_ADSP_TOP_STEP1 (GENMASK(12, 11)) +#define MT8186_TOP_AXI_PROT_EN_3_ADSP_TOP_STEP2 (GENMASK(1, 0)) + +#define MT8183_TOP_AXI_PROT_EN_STA1 0x228 +#define MT8183_TOP_AXI_PROT_EN_STA1_1 0x258 +#define MT8183_TOP_AXI_PROT_EN_SET 0x2a0 +#define MT8183_TOP_AXI_PROT_EN_CLR 0x2a4 +#define MT8183_TOP_AXI_PROT_EN_1_SET 0x2a8 +#define MT8183_TOP_AXI_PROT_EN_1_CLR 0x2ac +#define MT8183_TOP_AXI_PROT_EN_MCU_SET 0x2c4 +#define MT8183_TOP_AXI_PROT_EN_MCU_CLR 0x2c8 +#define MT8183_TOP_AXI_PROT_EN_MCU_STA1 0x2e4 +#define MT8183_TOP_AXI_PROT_EN_MM_SET 0x2d4 +#define MT8183_TOP_AXI_PROT_EN_MM_CLR 0x2d8 +#define MT8183_TOP_AXI_PROT_EN_MM_STA1 0x2ec + +#define MT8183_TOP_AXI_PROT_EN_DISP (BIT(10) | BIT(11)) +#define MT8183_TOP_AXI_PROT_EN_CONN (BIT(13) | BIT(14)) +#define MT8183_TOP_AXI_PROT_EN_MFG (BIT(21) | BIT(22)) +#define MT8183_TOP_AXI_PROT_EN_CAM BIT(28) +#define MT8183_TOP_AXI_PROT_EN_VPU_TOP BIT(27) +#define MT8183_TOP_AXI_PROT_EN_1_DISP (BIT(16) | BIT(17)) +#define MT8183_TOP_AXI_PROT_EN_1_MFG GENMASK(21, 19) +#define MT8183_TOP_AXI_PROT_EN_MM_ISP (BIT(3) | BIT(8)) +#define MT8183_TOP_AXI_PROT_EN_MM_ISP_2ND BIT(10) +#define MT8183_TOP_AXI_PROT_EN_MM_CAM (BIT(4) | BIT(5) | \ + BIT(9) | BIT(13)) +#define MT8183_TOP_AXI_PROT_EN_MM_VPU_TOP (GENMASK(9, 6) | \ + BIT(12)) +#define MT8183_TOP_AXI_PROT_EN_MM_VPU_TOP_2ND (BIT(10) | BIT(11)) +#define MT8183_TOP_AXI_PROT_EN_MM_CAM_2ND BIT(11) +#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE0_2ND (BIT(0) | BIT(2) | \ + BIT(4)) +#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE1_2ND (BIT(1) | BIT(3) | \ + BIT(5)) +#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE0 BIT(6) +#define MT8183_TOP_AXI_PROT_EN_MCU_VPU_CORE1 BIT(7) + +#define MT8183_SMI_COMMON_CLAMP_EN 0x3c0 +#define MT8183_SMI_COMMON_CLAMP_EN_SET 0x3c4 +#define MT8183_SMI_COMMON_CLAMP_EN_CLR 0x3c8 + +#define MT8183_SMI_COMMON_SMI_CLAMP_DISP GENMASK(7, 0) +#define MT8183_SMI_COMMON_SMI_CLAMP_VENC BIT(1) +#define MT8183_SMI_COMMON_SMI_CLAMP_ISP BIT(2) +#define MT8183_SMI_COMMON_SMI_CLAMP_CAM (BIT(3) | BIT(4)) +#define MT8183_SMI_COMMON_SMI_CLAMP_VPU_TOP (BIT(5) | BIT(6)) +#define MT8183_SMI_COMMON_SMI_CLAMP_VDEC BIT(7) + +#define MT8173_TOP_AXI_PROT_EN_MCI_M2 BIT(0) +#define MT8173_TOP_AXI_PROT_EN_MM_M0 BIT(1) +#define MT8173_TOP_AXI_PROT_EN_MM_M1 BIT(2) +#define MT8173_TOP_AXI_PROT_EN_MMAPB_S BIT(6) +#define MT8173_TOP_AXI_PROT_EN_L2C_M2 BIT(9) +#define MT8173_TOP_AXI_PROT_EN_L2SS_SMI BIT(11) +#define MT8173_TOP_AXI_PROT_EN_L2SS_ADD BIT(12) +#define MT8173_TOP_AXI_PROT_EN_CCI_M2 BIT(13) +#define MT8173_TOP_AXI_PROT_EN_MFG_S BIT(14) +#define MT8173_TOP_AXI_PROT_EN_PERI_M0 BIT(15) +#define MT8173_TOP_AXI_PROT_EN_PERI_M1 BIT(16) +#define MT8173_TOP_AXI_PROT_EN_DEBUGSYS BIT(17) +#define MT8173_TOP_AXI_PROT_EN_CQ_DMA BIT(18) +#define MT8173_TOP_AXI_PROT_EN_GCPU BIT(19) +#define MT8173_TOP_AXI_PROT_EN_IOMMU BIT(20) +#define MT8173_TOP_AXI_PROT_EN_MFG_M0 BIT(21) +#define MT8173_TOP_AXI_PROT_EN_MFG_M1 BIT(22) +#define MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT BIT(23) + +#define MT8167_TOP_AXI_PROT_EN_MM_EMI BIT(1) +#define MT8167_TOP_AXI_PROT_EN_MCU_MFG BIT(2) +#define MT8167_TOP_AXI_PROT_EN_CONN_EMI BIT(4) +#define MT8167_TOP_AXI_PROT_EN_MFG_EMI BIT(5) +#define MT8167_TOP_AXI_PROT_EN_CONN_MCU BIT(8) +#define MT8167_TOP_AXI_PROT_EN_MCU_CONN BIT(9) +#define MT8167_TOP_AXI_PROT_EN_MCU_MM BIT(11) + +#define MT2701_TOP_AXI_PROT_EN_MM_M0 BIT(1) +#define MT2701_TOP_AXI_PROT_EN_CONN_M BIT(2) +#define MT2701_TOP_AXI_PROT_EN_CONN_S BIT(8) + +#define MT7622_TOP_AXI_PROT_EN_ETHSYS (BIT(3) | BIT(17)) +#define MT7622_TOP_AXI_PROT_EN_HIF0 (BIT(24) | BIT(25)) +#define MT7622_TOP_AXI_PROT_EN_HIF1 (BIT(26) | BIT(27) | \ + BIT(28)) +#define MT7622_TOP_AXI_PROT_EN_WB (BIT(2) | BIT(6) | \ + BIT(7) | BIT(8)) + +#define INFRA_TOPAXI_PROTECTEN 0x0220 +#define INFRA_TOPAXI_PROTECTSTA1 0x0228 +#define INFRA_TOPAXI_PROTECTEN_SET 0x0260 +#define INFRA_TOPAXI_PROTECTEN_CLR 0x0264 + +#define MT8192_INFRA_CTRL 0x290 +#define MT8192_INFRA_CTRL_DISABLE_MFG2ACP BIT(9) + +#define REG_INFRA_MISC 0xf00 +#define F_DDR_4GB_SUPPORT_EN BIT(13) + +int mtk_infracfg_set_bus_protection(struct regmap *infracfg, u32 mask, + bool reg_update); +int mtk_infracfg_clear_bus_protection(struct regmap *infracfg, u32 mask, + bool reg_update); +#endif /* __SOC_MEDIATEK_INFRACFG_H */ diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h new file mode 100644 index 000000000..2b498f4f3 --- /dev/null +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -0,0 +1,280 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 MediaTek Inc. + * + */ + +#ifndef __MTK_CMDQ_H__ +#define __MTK_CMDQ_H__ + +#include <linux/mailbox_client.h> +#include <linux/mailbox/mtk-cmdq-mailbox.h> +#include <linux/timer.h> + +#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0))) +#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1)) + +struct cmdq_pkt; + +struct cmdq_client_reg { + u8 subsys; + u16 offset; + u16 size; +}; + +struct cmdq_client { + struct mbox_client client; + struct mbox_chan *chan; +}; + +/** + * cmdq_dev_get_client_reg() - parse cmdq client reg from the device + * node of CMDQ client + * @dev: device of CMDQ mailbox client + * @client_reg: CMDQ client reg pointer + * @idx: the index of desired reg + * + * Return: 0 for success; else the error code is returned + * + * Help CMDQ client parsing the cmdq client reg + * from the device node of CMDQ client. + */ +int cmdq_dev_get_client_reg(struct device *dev, + struct cmdq_client_reg *client_reg, int idx); + +/** + * cmdq_mbox_create() - create CMDQ mailbox client and channel + * @dev: device of CMDQ mailbox client + * @index: index of CMDQ mailbox channel + * + * Return: CMDQ mailbox client pointer + */ +struct cmdq_client *cmdq_mbox_create(struct device *dev, int index); + +/** + * cmdq_mbox_destroy() - destroy CMDQ mailbox client and channel + * @client: the CMDQ mailbox client + */ +void cmdq_mbox_destroy(struct cmdq_client *client); + +/** + * cmdq_pkt_create() - create a CMDQ packet + * @client: the CMDQ mailbox client + * @size: required CMDQ buffer size + * + * Return: CMDQ packet pointer + */ +struct cmdq_pkt *cmdq_pkt_create(struct cmdq_client *client, size_t size); + +/** + * cmdq_pkt_destroy() - destroy the CMDQ packet + * @pkt: the CMDQ packet + */ +void cmdq_pkt_destroy(struct cmdq_pkt *pkt); + +/** + * cmdq_pkt_write() - append write command to the CMDQ packet + * @pkt: the CMDQ packet + * @subsys: the CMDQ sub system code + * @offset: register offset from CMDQ sub system + * @value: the specified target register value + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value); + +/** + * cmdq_pkt_write_mask() - append write command with mask to the CMDQ packet + * @pkt: the CMDQ packet + * @subsys: the CMDQ sub system code + * @offset: register offset from CMDQ sub system + * @value: the specified target register value + * @mask: the specified target register mask + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, + u16 offset, u32 value, u32 mask); + +/* + * cmdq_pkt_read_s() - append read_s command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @reg_idx: the CMDQ internal register ID to cache read data + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, + u16 reg_idx); + +/** + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx); + +/** + * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * @mask: the specified target address mask, use U32_MAX if no need + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx, u32 mask); + +/** + * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which + * write value to a physical address + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @value: the specified target value + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value); + +/** + * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ + * packet which write value to a physical + * address + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @value: the specified target value + * @mask: the specified target mask + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value, u32 mask); + +/** + * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet + * @pkt: the CMDQ packet + * @event: the desired event type to wait + * @clear: clear event or not after event arrive + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear); + +/** + * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet + * @pkt: the CMDQ packet + * @event: the desired event to be cleared + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_clear_event(struct cmdq_pkt *pkt, u16 event); + +/** + * cmdq_pkt_set_event() - append set event command to the CMDQ packet + * @pkt: the CMDQ packet + * @event: the desired event to be set + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_set_event(struct cmdq_pkt *pkt, u16 event); + +/** + * cmdq_pkt_poll() - Append polling command to the CMDQ packet, ask GCE to + * execute an instruction that wait for a specified + * hardware register to check for the value w/o mask. + * All GCE hardware threads will be blocked by this + * instruction. + * @pkt: the CMDQ packet + * @subsys: the CMDQ sub system code + * @offset: register offset from CMDQ sub system + * @value: the specified target register value + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys, + u16 offset, u32 value); + +/** + * cmdq_pkt_poll_mask() - Append polling command to the CMDQ packet, ask GCE to + * execute an instruction that wait for a specified + * hardware register to check for the value w/ mask. + * All GCE hardware threads will be blocked by this + * instruction. + * @pkt: the CMDQ packet + * @subsys: the CMDQ sub system code + * @offset: register offset from CMDQ sub system + * @value: the specified target register value + * @mask: the specified target register mask + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, + u16 offset, u32 value, u32 mask); + +/** + * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE + * to execute an instruction that set a constant value into + * internal register and use as value, mask or address in + * read/write instruction. + * @pkt: the CMDQ packet + * @reg_idx: the CMDQ internal register ID + * @value: the specified value + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value); + +/** + * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread PC to + * a physical address which should contains more instruction. + * @pkt: the CMDQ packet + * @addr: physical address of target instruction buffer + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr); + +/** + * cmdq_pkt_finalize() - Append EOC and jump command to pkt. + * @pkt: the CMDQ packet + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_finalize(struct cmdq_pkt *pkt); + +/** + * cmdq_pkt_flush_async() - trigger CMDQ to asynchronously execute the CMDQ + * packet and call back at the end of done packet + * @pkt: the CMDQ packet + * + * Return: 0 for success; else the error code is returned + * + * Trigger CMDQ to asynchronously execute the CMDQ packet and call back + * at the end of done packet. Note that this is an ASYNC function. When the + * function returned, it may or may not be finished. + */ +int cmdq_pkt_flush_async(struct cmdq_pkt *pkt); + +#endif /* __MTK_CMDQ_H__ */ diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h new file mode 100644 index 000000000..d2b02bb43 --- /dev/null +++ b/include/linux/soc/mediatek/mtk-mmsys.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2015 MediaTek Inc. + */ + +#ifndef __MTK_MMSYS_H +#define __MTK_MMSYS_H + +enum mtk_ddp_comp_id; +struct device; + +enum mtk_ddp_comp_id { + DDP_COMPONENT_AAL0, + DDP_COMPONENT_AAL1, + DDP_COMPONENT_BLS, + DDP_COMPONENT_CCORR, + DDP_COMPONENT_COLOR0, + DDP_COMPONENT_COLOR1, + DDP_COMPONENT_DITHER, + DDP_COMPONENT_DITHER0 = DDP_COMPONENT_DITHER, + DDP_COMPONENT_DITHER1, + DDP_COMPONENT_DP_INTF0, + DDP_COMPONENT_DP_INTF1, + DDP_COMPONENT_DPI0, + DDP_COMPONENT_DPI1, + DDP_COMPONENT_DSC0, + DDP_COMPONENT_DSC1, + DDP_COMPONENT_DSI0, + DDP_COMPONENT_DSI1, + DDP_COMPONENT_DSI2, + DDP_COMPONENT_DSI3, + DDP_COMPONENT_GAMMA, + DDP_COMPONENT_MERGE0, + DDP_COMPONENT_MERGE1, + DDP_COMPONENT_MERGE2, + DDP_COMPONENT_MERGE3, + DDP_COMPONENT_MERGE4, + DDP_COMPONENT_MERGE5, + DDP_COMPONENT_OD0, + DDP_COMPONENT_OD1, + DDP_COMPONENT_OVL0, + DDP_COMPONENT_OVL_2L0, + DDP_COMPONENT_OVL_2L1, + DDP_COMPONENT_OVL_2L2, + DDP_COMPONENT_OVL1, + DDP_COMPONENT_POSTMASK0, + DDP_COMPONENT_PWM0, + DDP_COMPONENT_PWM1, + DDP_COMPONENT_PWM2, + DDP_COMPONENT_RDMA0, + DDP_COMPONENT_RDMA1, + DDP_COMPONENT_RDMA2, + DDP_COMPONENT_RDMA4, + DDP_COMPONENT_UFOE, + DDP_COMPONENT_WDMA0, + DDP_COMPONENT_WDMA1, + DDP_COMPONENT_ID_MAX, +}; + +void mtk_mmsys_ddp_connect(struct device *dev, + enum mtk_ddp_comp_id cur, + enum mtk_ddp_comp_id next); + +void mtk_mmsys_ddp_disconnect(struct device *dev, + enum mtk_ddp_comp_id cur, + enum mtk_ddp_comp_id next); + +void mtk_mmsys_ddp_dpi_fmt_config(struct device *dev, u32 val); + +#endif /* __MTK_MMSYS_H */ diff --git a/include/linux/soc/mediatek/mtk-mutex.h b/include/linux/soc/mediatek/mtk-mutex.h new file mode 100644 index 000000000..b335c2837 --- /dev/null +++ b/include/linux/soc/mediatek/mtk-mutex.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2015 MediaTek Inc. + */ + +#ifndef MTK_MUTEX_H +#define MTK_MUTEX_H + +struct regmap; +struct device; +struct mtk_mutex; + +enum mtk_mutex_mod_index { + /* MDP table index */ + MUTEX_MOD_IDX_MDP_RDMA0, + MUTEX_MOD_IDX_MDP_RSZ0, + MUTEX_MOD_IDX_MDP_RSZ1, + MUTEX_MOD_IDX_MDP_TDSHP0, + MUTEX_MOD_IDX_MDP_WROT0, + MUTEX_MOD_IDX_MDP_WDMA, + MUTEX_MOD_IDX_MDP_AAL0, + MUTEX_MOD_IDX_MDP_CCORR0, + MUTEX_MOD_IDX_MDP_HDR0, + MUTEX_MOD_IDX_MDP_COLOR0, + + MUTEX_MOD_IDX_MAX /* ALWAYS keep at the end */ +}; + +enum mtk_mutex_sof_index { + MUTEX_SOF_IDX_SINGLE_MODE, + + MUTEX_SOF_IDX_MAX /* ALWAYS keep at the end */ +}; + +struct mtk_mutex *mtk_mutex_get(struct device *dev); +int mtk_mutex_prepare(struct mtk_mutex *mutex); +void mtk_mutex_add_comp(struct mtk_mutex *mutex, + enum mtk_ddp_comp_id id); +void mtk_mutex_enable(struct mtk_mutex *mutex); +int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, + void *pkt); +void mtk_mutex_disable(struct mtk_mutex *mutex); +void mtk_mutex_remove_comp(struct mtk_mutex *mutex, + enum mtk_ddp_comp_id id); +void mtk_mutex_unprepare(struct mtk_mutex *mutex); +void mtk_mutex_put(struct mtk_mutex *mutex); +void mtk_mutex_acquire(struct mtk_mutex *mutex); +void mtk_mutex_release(struct mtk_mutex *mutex); +int mtk_mutex_write_mod(struct mtk_mutex *mutex, + enum mtk_mutex_mod_index idx, + bool clear); +int mtk_mutex_write_sof(struct mtk_mutex *mutex, + enum mtk_mutex_sof_index idx); + +#endif /* MTK_MUTEX_H */ diff --git a/include/linux/soc/mediatek/mtk_sip_svc.h b/include/linux/soc/mediatek/mtk_sip_svc.h new file mode 100644 index 000000000..0761128b4 --- /dev/null +++ b/include/linux/soc/mediatek/mtk_sip_svc.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 MediaTek Inc. + */ +#ifndef __MTK_SIP_SVC_H +#define __MTK_SIP_SVC_H + +/* Error Code */ +#define SIP_SVC_E_SUCCESS 0 +#define SIP_SVC_E_NOT_SUPPORTED -1 +#define SIP_SVC_E_INVALID_PARAMS -2 +#define SIP_SVC_E_INVALID_RANGE -3 +#define SIP_SVC_E_PERMISSION_DENIED -4 + +#ifdef CONFIG_ARM64 +#define MTK_SIP_SMC_CONVENTION ARM_SMCCC_SMC_64 +#else +#define MTK_SIP_SMC_CONVENTION ARM_SMCCC_SMC_32 +#endif + +#define MTK_SIP_SMC_CMD(fn_id) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, MTK_SIP_SMC_CONVENTION, \ + ARM_SMCCC_OWNER_SIP, fn_id) + +/* IOMMU related SMC call */ +#define MTK_SIP_KERNEL_IOMMU_CONTROL MTK_SIP_SMC_CMD(0x514) + +#endif diff --git a/include/linux/soc/mediatek/mtk_wed.h b/include/linux/soc/mediatek/mtk_wed.h new file mode 100644 index 000000000..4450c8b7a --- /dev/null +++ b/include/linux/soc/mediatek/mtk_wed.h @@ -0,0 +1,148 @@ +#ifndef __MTK_WED_H +#define __MTK_WED_H + +#include <linux/kernel.h> +#include <linux/rcupdate.h> +#include <linux/regmap.h> +#include <linux/pci.h> + +#define MTK_WED_TX_QUEUES 2 + +struct mtk_wed_hw; +struct mtk_wdma_desc; + +enum mtk_wed_bus_tye { + MTK_WED_BUS_PCIE, + MTK_WED_BUS_AXI, +}; + +struct mtk_wed_ring { + struct mtk_wdma_desc *desc; + dma_addr_t desc_phys; + u32 desc_size; + int size; + + u32 reg_base; + void __iomem *wpdma; +}; + +struct mtk_wed_device { +#ifdef CONFIG_NET_MEDIATEK_SOC_WED + const struct mtk_wed_ops *ops; + struct device *dev; + struct mtk_wed_hw *hw; + bool init_done, running; + int wdma_idx; + int irq; + + struct mtk_wed_ring tx_ring[MTK_WED_TX_QUEUES]; + struct mtk_wed_ring txfree_ring; + struct mtk_wed_ring tx_wdma[MTK_WED_TX_QUEUES]; + + struct { + int size; + void **pages; + struct mtk_wdma_desc *desc; + dma_addr_t desc_phys; + } buf_ring; + + /* filled by driver: */ + struct { + union { + struct platform_device *platform_dev; + struct pci_dev *pci_dev; + }; + enum mtk_wed_bus_tye bus_type; + + u32 wpdma_phys; + u32 wpdma_int; + u32 wpdma_mask; + u32 wpdma_tx; + u32 wpdma_txfree; + + u16 token_start; + unsigned int nbuf; + + u8 tx_tbit[MTK_WED_TX_QUEUES]; + u8 txfree_tbit; + + u32 (*init_buf)(void *ptr, dma_addr_t phys, int token_id); + int (*offload_enable)(struct mtk_wed_device *wed); + void (*offload_disable)(struct mtk_wed_device *wed); + } wlan; +#endif +}; + +struct mtk_wed_ops { + int (*attach)(struct mtk_wed_device *dev); + int (*tx_ring_setup)(struct mtk_wed_device *dev, int ring, + void __iomem *regs); + int (*txfree_ring_setup)(struct mtk_wed_device *dev, + void __iomem *regs); + void (*detach)(struct mtk_wed_device *dev); + + void (*stop)(struct mtk_wed_device *dev); + void (*start)(struct mtk_wed_device *dev, u32 irq_mask); + void (*reset_dma)(struct mtk_wed_device *dev); + + u32 (*reg_read)(struct mtk_wed_device *dev, u32 reg); + void (*reg_write)(struct mtk_wed_device *dev, u32 reg, u32 val); + + u32 (*irq_get)(struct mtk_wed_device *dev, u32 mask); + void (*irq_set_mask)(struct mtk_wed_device *dev, u32 mask); +}; + +extern const struct mtk_wed_ops __rcu *mtk_soc_wed_ops; + +static inline int +mtk_wed_device_attach(struct mtk_wed_device *dev) +{ + int ret = -ENODEV; + +#ifdef CONFIG_NET_MEDIATEK_SOC_WED + rcu_read_lock(); + dev->ops = rcu_dereference(mtk_soc_wed_ops); + if (dev->ops) + ret = dev->ops->attach(dev); + else + rcu_read_unlock(); + + if (ret) + dev->ops = NULL; +#endif + + return ret; +} + +#ifdef CONFIG_NET_MEDIATEK_SOC_WED +#define mtk_wed_device_active(_dev) !!(_dev)->ops +#define mtk_wed_device_detach(_dev) (_dev)->ops->detach(_dev) +#define mtk_wed_device_start(_dev, _mask) (_dev)->ops->start(_dev, _mask) +#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) \ + (_dev)->ops->tx_ring_setup(_dev, _ring, _regs) +#define mtk_wed_device_txfree_ring_setup(_dev, _regs) \ + (_dev)->ops->txfree_ring_setup(_dev, _regs) +#define mtk_wed_device_reg_read(_dev, _reg) \ + (_dev)->ops->reg_read(_dev, _reg) +#define mtk_wed_device_reg_write(_dev, _reg, _val) \ + (_dev)->ops->reg_write(_dev, _reg, _val) +#define mtk_wed_device_irq_get(_dev, _mask) \ + (_dev)->ops->irq_get(_dev, _mask) +#define mtk_wed_device_irq_set_mask(_dev, _mask) \ + (_dev)->ops->irq_set_mask(_dev, _mask) +#else +static inline bool mtk_wed_device_active(struct mtk_wed_device *dev) +{ + return false; +} +#define mtk_wed_device_detach(_dev) do {} while (0) +#define mtk_wed_device_start(_dev, _mask) do {} while (0) +#define mtk_wed_device_tx_ring_setup(_dev, _ring, _regs) -ENODEV +#define mtk_wed_device_txfree_ring_setup(_dev, _ring, _regs) -ENODEV +#define mtk_wed_device_reg_read(_dev, _reg) 0 +#define mtk_wed_device_reg_write(_dev, _reg, _val) do {} while (0) +#define mtk_wed_device_irq_get(_dev, _mask) 0 +#define mtk_wed_device_irq_set_mask(_dev, _mask) do {} while (0) +#endif + +#endif diff --git a/include/linux/soc/mmp/cputype.h b/include/linux/soc/mmp/cputype.h new file mode 100644 index 000000000..221790761 --- /dev/null +++ b/include/linux/soc/mmp/cputype.h @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_MACH_CPUTYPE_H +#define __ASM_MACH_CPUTYPE_H + +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64) +#include <asm/cputype.h> +#endif + +/* + * CPU Stepping CPU_ID CHIP_ID + * + * PXA168 S0 0x56158400 0x0000C910 + * PXA168 A0 0x56158400 0x00A0A168 + * PXA910 Y1 0x56158400 0x00F2C920 + * PXA910 A0 0x56158400 0x00F2C910 + * PXA910 A1 0x56158400 0x00A0C910 + * PXA920 Y0 0x56158400 0x00F2C920 + * PXA920 A0 0x56158400 0x00A0C920 + * PXA920 A1 0x56158400 0x00A1C920 + * MMP2 Z0 0x560f5811 0x00F00410 + * MMP2 Z1 0x560f5811 0x00E00410 + * MMP2 A0 0x560f5811 0x00A0A610 + * MMP3 A0 0x562f5842 0x00A02128 + * MMP3 B0 0x562f5842 0x00B02128 + */ + +extern unsigned int mmp_chip_id; + +#ifdef CONFIG_CPU_PXA168 +static inline int cpu_is_pxa168(void) +{ + return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && + ((mmp_chip_id & 0xfff) == 0x168); +} +#else +#define cpu_is_pxa168() (0) +#endif + +/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ +#ifdef CONFIG_CPU_PXA910 +static inline int cpu_is_pxa910(void) +{ + return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && + (((mmp_chip_id & 0xfff) == 0x910) || + ((mmp_chip_id & 0xfff) == 0x920)); +} +#else +#define cpu_is_pxa910() (0) +#endif + +#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT) +static inline int cpu_is_mmp2(void) +{ + return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && + (((mmp_chip_id & 0xfff) == 0x410) || + ((mmp_chip_id & 0xfff) == 0x610)); +} +#else +#define cpu_is_mmp2() (0) +#endif + +#ifdef CONFIG_MACH_MMP3_DT +static inline int cpu_is_mmp3(void) +{ + return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && + ((mmp_chip_id & 0xffff) == 0x2128); +} + +static inline int cpu_is_mmp3_a0(void) +{ + return (cpu_is_mmp3() && + ((mmp_chip_id & 0x00ff0000) == 0x00a00000)); +} + +static inline int cpu_is_mmp3_b0(void) +{ + return (cpu_is_mmp3() && + ((mmp_chip_id & 0x00ff0000) == 0x00b00000)); +} + +#else +#define cpu_is_mmp3() (0) +#define cpu_is_mmp3_a0() (0) +#define cpu_is_mmp3_b0() (0) +#endif + +#endif /* __ASM_MACH_CPUTYPE_H */ diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h new file mode 100644 index 000000000..699c6f1e3 --- /dev/null +++ b/include/linux/soc/nxp/lpc32xx-misc.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + */ + +#ifndef __SOC_LPC32XX_MISC_H +#define __SOC_LPC32XX_MISC_H + +#include <linux/types.h> +#include <linux/phy.h> + +#ifdef CONFIG_ARCH_LPC32XX +extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr); +extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode); +extern void lpc32xx_loopback_set(resource_size_t mapbase, int state); +#else +static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr) +{ + *mapbase = NULL; + *dmaaddr = 0; + return 0; +} +static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode) +{ +} +static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state) +{ +} +#endif + +#endif /* __SOC_LPC32XX_MISC_H */ diff --git a/include/linux/soc/pxa/cpu.h b/include/linux/soc/pxa/cpu.h new file mode 100644 index 000000000..5782450ee --- /dev/null +++ b/include/linux/soc/pxa/cpu.h @@ -0,0 +1,252 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + */ + +#ifndef __SOC_PXA_CPU_H +#define __SOC_PXA_CPU_H + +#ifdef CONFIG_ARM +#include <asm/cputype.h> +#endif + +/* + * CPU Stepping CPU_ID JTAG_ID + * + * PXA210 B0 0x69052922 0x2926C013 + * PXA210 B1 0x69052923 0x3926C013 + * PXA210 B2 0x69052924 0x4926C013 + * PXA210 C0 0x69052D25 0x5926C013 + * + * PXA250 A0 0x69052100 0x09264013 + * PXA250 A1 0x69052101 0x19264013 + * PXA250 B0 0x69052902 0x29264013 + * PXA250 B1 0x69052903 0x39264013 + * PXA250 B2 0x69052904 0x49264013 + * PXA250 C0 0x69052D05 0x59264013 + * + * PXA255 A0 0x69052D06 0x69264013 + * + * PXA26x A0 0x69052903 0x39264013 + * PXA26x B0 0x69052D05 0x59264013 + * + * PXA27x A0 0x69054110 0x09265013 + * PXA27x A1 0x69054111 0x19265013 + * PXA27x B0 0x69054112 0x29265013 + * PXA27x B1 0x69054113 0x39265013 + * PXA27x C0 0x69054114 0x49265013 + * PXA27x C5 0x69054117 0x79265013 + * + * PXA30x A0 0x69056880 0x0E648013 + * PXA30x A1 0x69056881 0x1E648013 + * PXA31x A0 0x69056890 0x0E649013 + * PXA31x A1 0x69056891 0x1E649013 + * PXA31x A2 0x69056892 0x2E649013 + * PXA32x B1 0x69056825 0x5E642013 + * PXA32x B2 0x69056826 0x6E642013 + * + * PXA930 B0 0x69056835 0x5E643013 + * PXA930 B1 0x69056837 0x7E643013 + * PXA930 B2 0x69056838 0x8E643013 + * + * PXA935 A0 0x56056931 0x1E653013 + * PXA935 B0 0x56056936 0x6E653013 + * PXA935 B1 0x56056938 0x8E653013 + */ +#ifdef CONFIG_PXA25x +#define __cpu_is_pxa210(id) \ + ({ \ + unsigned int _id = (id) & 0xf3f0; \ + _id == 0x2120; \ + }) + +#define __cpu_is_pxa250(id) \ + ({ \ + unsigned int _id = (id) & 0xf3ff; \ + _id <= 0x2105; \ + }) + +#define __cpu_is_pxa255(id) \ + ({ \ + unsigned int _id = (id) & 0xffff; \ + _id == 0x2d06; \ + }) + +#define __cpu_is_pxa25x(id) \ + ({ \ + unsigned int _id = (id) & 0xf300; \ + _id == 0x2100; \ + }) +#else +#define __cpu_is_pxa210(id) (0) +#define __cpu_is_pxa250(id) (0) +#define __cpu_is_pxa255(id) (0) +#define __cpu_is_pxa25x(id) (0) +#endif + +#ifdef CONFIG_PXA27x +#define __cpu_is_pxa27x(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x411; \ + }) +#else +#define __cpu_is_pxa27x(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA300 +#define __cpu_is_pxa300(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x688; \ + }) +#else +#define __cpu_is_pxa300(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA310 +#define __cpu_is_pxa310(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x689; \ + }) +#else +#define __cpu_is_pxa310(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA320 +#define __cpu_is_pxa320(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x603 || _id == 0x682; \ + }) +#else +#define __cpu_is_pxa320(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA930 +#define __cpu_is_pxa930(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x683; \ + }) +#else +#define __cpu_is_pxa930(id) (0) +#endif + +#ifdef CONFIG_CPU_PXA935 +#define __cpu_is_pxa935(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x693; \ + }) +#else +#define __cpu_is_pxa935(id) (0) +#endif + +#define cpu_is_pxa210() \ + ({ \ + __cpu_is_pxa210(read_cpuid_id()); \ + }) + +#define cpu_is_pxa250() \ + ({ \ + __cpu_is_pxa250(read_cpuid_id()); \ + }) + +#define cpu_is_pxa255() \ + ({ \ + __cpu_is_pxa255(read_cpuid_id()); \ + }) + +#define cpu_is_pxa25x() \ + ({ \ + __cpu_is_pxa25x(read_cpuid_id()); \ + }) + +#define cpu_is_pxa27x() \ + ({ \ + __cpu_is_pxa27x(read_cpuid_id()); \ + }) + +#define cpu_is_pxa300() \ + ({ \ + __cpu_is_pxa300(read_cpuid_id()); \ + }) + +#define cpu_is_pxa310() \ + ({ \ + __cpu_is_pxa310(read_cpuid_id()); \ + }) + +#define cpu_is_pxa320() \ + ({ \ + __cpu_is_pxa320(read_cpuid_id()); \ + }) + +#define cpu_is_pxa930() \ + ({ \ + __cpu_is_pxa930(read_cpuid_id()); \ + }) + +#define cpu_is_pxa935() \ + ({ \ + __cpu_is_pxa935(read_cpuid_id()); \ + }) + + + +/* + * CPUID Core Generation Bit + * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x + */ +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +#define __cpu_is_pxa2xx(id) \ + ({ \ + unsigned int _id = (id) >> 13 & 0x7; \ + _id <= 0x2; \ + }) +#else +#define __cpu_is_pxa2xx(id) (0) +#endif + +#ifdef CONFIG_PXA3xx +#define __cpu_is_pxa3xx(id) \ + ({ \ + __cpu_is_pxa300(id) \ + || __cpu_is_pxa310(id) \ + || __cpu_is_pxa320(id) \ + || __cpu_is_pxa93x(id); \ + }) +#else +#define __cpu_is_pxa3xx(id) (0) +#endif + +#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935) +#define __cpu_is_pxa93x(id) \ + ({ \ + __cpu_is_pxa930(id) \ + || __cpu_is_pxa935(id); \ + }) +#else +#define __cpu_is_pxa93x(id) (0) +#endif + +#define cpu_is_pxa2xx() \ + ({ \ + __cpu_is_pxa2xx(read_cpuid_id()); \ + }) + +#define cpu_is_pxa3xx() \ + ({ \ + __cpu_is_pxa3xx(read_cpuid_id()); \ + }) + +#define cpu_is_pxa93x() \ + ({ \ + __cpu_is_pxa93x(read_cpuid_id()); \ + }) + +#endif diff --git a/include/linux/soc/pxa/mfp.h b/include/linux/soc/pxa/mfp.h new file mode 100644 index 000000000..39779cbed --- /dev/null +++ b/include/linux/soc/pxa/mfp.h @@ -0,0 +1,470 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Common Multi-Function Pin Definitions + * + * Copyright (C) 2007 Marvell International Ltd. + * + * 2007-8-21: eric miao <eric.miao@marvell.com> + * initial version + */ + +#ifndef __ASM_PLAT_MFP_H +#define __ASM_PLAT_MFP_H + +#define mfp_to_gpio(m) ((m) % 256) + +/* list of all the configurable MFP pins */ +enum { + MFP_PIN_INVALID = -1, + + MFP_PIN_GPIO0 = 0, + MFP_PIN_GPIO1, + MFP_PIN_GPIO2, + MFP_PIN_GPIO3, + MFP_PIN_GPIO4, + MFP_PIN_GPIO5, + MFP_PIN_GPIO6, + MFP_PIN_GPIO7, + MFP_PIN_GPIO8, + MFP_PIN_GPIO9, + MFP_PIN_GPIO10, + MFP_PIN_GPIO11, + MFP_PIN_GPIO12, + MFP_PIN_GPIO13, + MFP_PIN_GPIO14, + MFP_PIN_GPIO15, + MFP_PIN_GPIO16, + MFP_PIN_GPIO17, + MFP_PIN_GPIO18, + MFP_PIN_GPIO19, + MFP_PIN_GPIO20, + MFP_PIN_GPIO21, + MFP_PIN_GPIO22, + MFP_PIN_GPIO23, + MFP_PIN_GPIO24, + MFP_PIN_GPIO25, + MFP_PIN_GPIO26, + MFP_PIN_GPIO27, + MFP_PIN_GPIO28, + MFP_PIN_GPIO29, + MFP_PIN_GPIO30, + MFP_PIN_GPIO31, + MFP_PIN_GPIO32, + MFP_PIN_GPIO33, + MFP_PIN_GPIO34, + MFP_PIN_GPIO35, + MFP_PIN_GPIO36, + MFP_PIN_GPIO37, + MFP_PIN_GPIO38, + MFP_PIN_GPIO39, + MFP_PIN_GPIO40, + MFP_PIN_GPIO41, + MFP_PIN_GPIO42, + MFP_PIN_GPIO43, + MFP_PIN_GPIO44, + MFP_PIN_GPIO45, + MFP_PIN_GPIO46, + MFP_PIN_GPIO47, + MFP_PIN_GPIO48, + MFP_PIN_GPIO49, + MFP_PIN_GPIO50, + MFP_PIN_GPIO51, + MFP_PIN_GPIO52, + MFP_PIN_GPIO53, + MFP_PIN_GPIO54, + MFP_PIN_GPIO55, + MFP_PIN_GPIO56, + MFP_PIN_GPIO57, + MFP_PIN_GPIO58, + MFP_PIN_GPIO59, + MFP_PIN_GPIO60, + MFP_PIN_GPIO61, + MFP_PIN_GPIO62, + MFP_PIN_GPIO63, + MFP_PIN_GPIO64, + MFP_PIN_GPIO65, + MFP_PIN_GPIO66, + MFP_PIN_GPIO67, + MFP_PIN_GPIO68, + MFP_PIN_GPIO69, + MFP_PIN_GPIO70, + MFP_PIN_GPIO71, + MFP_PIN_GPIO72, + MFP_PIN_GPIO73, + MFP_PIN_GPIO74, + MFP_PIN_GPIO75, + MFP_PIN_GPIO76, + MFP_PIN_GPIO77, + MFP_PIN_GPIO78, + MFP_PIN_GPIO79, + MFP_PIN_GPIO80, + MFP_PIN_GPIO81, + MFP_PIN_GPIO82, + MFP_PIN_GPIO83, + MFP_PIN_GPIO84, + MFP_PIN_GPIO85, + MFP_PIN_GPIO86, + MFP_PIN_GPIO87, + MFP_PIN_GPIO88, + MFP_PIN_GPIO89, + MFP_PIN_GPIO90, + MFP_PIN_GPIO91, + MFP_PIN_GPIO92, + MFP_PIN_GPIO93, + MFP_PIN_GPIO94, + MFP_PIN_GPIO95, + MFP_PIN_GPIO96, + MFP_PIN_GPIO97, + MFP_PIN_GPIO98, + MFP_PIN_GPIO99, + MFP_PIN_GPIO100, + MFP_PIN_GPIO101, + MFP_PIN_GPIO102, + MFP_PIN_GPIO103, + MFP_PIN_GPIO104, + MFP_PIN_GPIO105, + MFP_PIN_GPIO106, + MFP_PIN_GPIO107, + MFP_PIN_GPIO108, + MFP_PIN_GPIO109, + MFP_PIN_GPIO110, + MFP_PIN_GPIO111, + MFP_PIN_GPIO112, + MFP_PIN_GPIO113, + MFP_PIN_GPIO114, + MFP_PIN_GPIO115, + MFP_PIN_GPIO116, + MFP_PIN_GPIO117, + MFP_PIN_GPIO118, + MFP_PIN_GPIO119, + MFP_PIN_GPIO120, + MFP_PIN_GPIO121, + MFP_PIN_GPIO122, + MFP_PIN_GPIO123, + MFP_PIN_GPIO124, + MFP_PIN_GPIO125, + MFP_PIN_GPIO126, + MFP_PIN_GPIO127, + + MFP_PIN_GPIO128, + MFP_PIN_GPIO129, + MFP_PIN_GPIO130, + MFP_PIN_GPIO131, + MFP_PIN_GPIO132, + MFP_PIN_GPIO133, + MFP_PIN_GPIO134, + MFP_PIN_GPIO135, + MFP_PIN_GPIO136, + MFP_PIN_GPIO137, + MFP_PIN_GPIO138, + MFP_PIN_GPIO139, + MFP_PIN_GPIO140, + MFP_PIN_GPIO141, + MFP_PIN_GPIO142, + MFP_PIN_GPIO143, + MFP_PIN_GPIO144, + MFP_PIN_GPIO145, + MFP_PIN_GPIO146, + MFP_PIN_GPIO147, + MFP_PIN_GPIO148, + MFP_PIN_GPIO149, + MFP_PIN_GPIO150, + MFP_PIN_GPIO151, + MFP_PIN_GPIO152, + MFP_PIN_GPIO153, + MFP_PIN_GPIO154, + MFP_PIN_GPIO155, + MFP_PIN_GPIO156, + MFP_PIN_GPIO157, + MFP_PIN_GPIO158, + MFP_PIN_GPIO159, + MFP_PIN_GPIO160, + MFP_PIN_GPIO161, + MFP_PIN_GPIO162, + MFP_PIN_GPIO163, + MFP_PIN_GPIO164, + MFP_PIN_GPIO165, + MFP_PIN_GPIO166, + MFP_PIN_GPIO167, + MFP_PIN_GPIO168, + MFP_PIN_GPIO169, + MFP_PIN_GPIO170, + MFP_PIN_GPIO171, + MFP_PIN_GPIO172, + MFP_PIN_GPIO173, + MFP_PIN_GPIO174, + MFP_PIN_GPIO175, + MFP_PIN_GPIO176, + MFP_PIN_GPIO177, + MFP_PIN_GPIO178, + MFP_PIN_GPIO179, + MFP_PIN_GPIO180, + MFP_PIN_GPIO181, + MFP_PIN_GPIO182, + MFP_PIN_GPIO183, + MFP_PIN_GPIO184, + MFP_PIN_GPIO185, + MFP_PIN_GPIO186, + MFP_PIN_GPIO187, + MFP_PIN_GPIO188, + MFP_PIN_GPIO189, + MFP_PIN_GPIO190, + MFP_PIN_GPIO191, + + MFP_PIN_GPIO255 = 255, + + MFP_PIN_GPIO0_2, + MFP_PIN_GPIO1_2, + MFP_PIN_GPIO2_2, + MFP_PIN_GPIO3_2, + MFP_PIN_GPIO4_2, + MFP_PIN_GPIO5_2, + MFP_PIN_GPIO6_2, + MFP_PIN_GPIO7_2, + MFP_PIN_GPIO8_2, + MFP_PIN_GPIO9_2, + MFP_PIN_GPIO10_2, + MFP_PIN_GPIO11_2, + MFP_PIN_GPIO12_2, + MFP_PIN_GPIO13_2, + MFP_PIN_GPIO14_2, + MFP_PIN_GPIO15_2, + MFP_PIN_GPIO16_2, + MFP_PIN_GPIO17_2, + + MFP_PIN_ULPI_STP, + MFP_PIN_ULPI_NXT, + MFP_PIN_ULPI_DIR, + + MFP_PIN_nXCVREN, + MFP_PIN_DF_CLE_nOE, + MFP_PIN_DF_nADV1_ALE, + MFP_PIN_DF_SCLK_E, + MFP_PIN_DF_SCLK_S, + MFP_PIN_nBE0, + MFP_PIN_nBE1, + MFP_PIN_DF_nADV2_ALE, + MFP_PIN_DF_INT_RnB, + MFP_PIN_DF_nCS0, + MFP_PIN_DF_nCS1, + MFP_PIN_nLUA, + MFP_PIN_nLLA, + MFP_PIN_DF_nWE, + MFP_PIN_DF_ALE_nWE, + MFP_PIN_DF_nRE_nOE, + MFP_PIN_DF_ADDR0, + MFP_PIN_DF_ADDR1, + MFP_PIN_DF_ADDR2, + MFP_PIN_DF_ADDR3, + MFP_PIN_DF_IO0, + MFP_PIN_DF_IO1, + MFP_PIN_DF_IO2, + MFP_PIN_DF_IO3, + MFP_PIN_DF_IO4, + MFP_PIN_DF_IO5, + MFP_PIN_DF_IO6, + MFP_PIN_DF_IO7, + MFP_PIN_DF_IO8, + MFP_PIN_DF_IO9, + MFP_PIN_DF_IO10, + MFP_PIN_DF_IO11, + MFP_PIN_DF_IO12, + MFP_PIN_DF_IO13, + MFP_PIN_DF_IO14, + MFP_PIN_DF_IO15, + MFP_PIN_DF_nCS0_SM_nCS2, + MFP_PIN_DF_nCS1_SM_nCS3, + MFP_PIN_SM_nCS0, + MFP_PIN_SM_nCS1, + MFP_PIN_DF_WEn, + MFP_PIN_DF_REn, + MFP_PIN_DF_CLE_SM_OEn, + MFP_PIN_DF_ALE_SM_WEn, + MFP_PIN_DF_RDY0, + MFP_PIN_DF_RDY1, + + MFP_PIN_SM_SCLK, + MFP_PIN_SM_BE0, + MFP_PIN_SM_BE1, + MFP_PIN_SM_ADV, + MFP_PIN_SM_ADVMUX, + MFP_PIN_SM_RDY, + + MFP_PIN_MMC1_DAT7, + MFP_PIN_MMC1_DAT6, + MFP_PIN_MMC1_DAT5, + MFP_PIN_MMC1_DAT4, + MFP_PIN_MMC1_DAT3, + MFP_PIN_MMC1_DAT2, + MFP_PIN_MMC1_DAT1, + MFP_PIN_MMC1_DAT0, + MFP_PIN_MMC1_CMD, + MFP_PIN_MMC1_CLK, + MFP_PIN_MMC1_CD, + MFP_PIN_MMC1_WP, + + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + + /* additional pins on MMP2 */ + MFP_PIN_TWSI1_SCL, + MFP_PIN_TWSI1_SDA, + MFP_PIN_TWSI4_SCL, + MFP_PIN_TWSI4_SDA, + MFP_PIN_CLK_REQ, + + MFP_PIN_MAX, +}; + +/* + * a possible MFP configuration is represented by a 32-bit integer + * + * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) + * bit 10..12 - Alternate Function Selection + * bit 13..15 - Drive Strength + * bit 16..18 - Low Power Mode State + * bit 19..20 - Low Power Mode Edge Detection + * bit 21..22 - Run Mode Pull State + * + * to facilitate the definition, the following macros are provided + * + * MFP_CFG_DEFAULT - default MFP configuration value, with + * alternate function = 0, + * drive strength = fast 3mA (MFP_DS03X) + * low power mode = default + * edge detection = none + * + * MFP_CFG - default MFPR value with alternate function + * MFP_CFG_DRV - default MFPR value with alternate function and + * pin drive strength + * MFP_CFG_LPM - default MFPR value with alternate function and + * low power mode + * MFP_CFG_X - default MFPR value with alternate function, + * pin drive strength and low power mode + */ + +typedef unsigned long mfp_cfg_t; + +#define MFP_PIN(x) ((x) & 0x3ff) + +#define MFP_AF0 (0x0 << 10) +#define MFP_AF1 (0x1 << 10) +#define MFP_AF2 (0x2 << 10) +#define MFP_AF3 (0x3 << 10) +#define MFP_AF4 (0x4 << 10) +#define MFP_AF5 (0x5 << 10) +#define MFP_AF6 (0x6 << 10) +#define MFP_AF7 (0x7 << 10) +#define MFP_AF_MASK (0x7 << 10) +#define MFP_AF(x) (((x) >> 10) & 0x7) + +#define MFP_DS01X (0x0 << 13) +#define MFP_DS02X (0x1 << 13) +#define MFP_DS03X (0x2 << 13) +#define MFP_DS04X (0x3 << 13) +#define MFP_DS06X (0x4 << 13) +#define MFP_DS08X (0x5 << 13) +#define MFP_DS10X (0x6 << 13) +#define MFP_DS13X (0x7 << 13) +#define MFP_DS_MASK (0x7 << 13) +#define MFP_DS(x) (((x) >> 13) & 0x7) + +#define MFP_LPM_DEFAULT (0x0 << 16) +#define MFP_LPM_DRIVE_LOW (0x1 << 16) +#define MFP_LPM_DRIVE_HIGH (0x2 << 16) +#define MFP_LPM_PULL_LOW (0x3 << 16) +#define MFP_LPM_PULL_HIGH (0x4 << 16) +#define MFP_LPM_FLOAT (0x5 << 16) +#define MFP_LPM_INPUT (0x6 << 16) +#define MFP_LPM_STATE_MASK (0x7 << 16) +#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7) + +#define MFP_LPM_EDGE_NONE (0x0 << 19) +#define MFP_LPM_EDGE_RISE (0x1 << 19) +#define MFP_LPM_EDGE_FALL (0x2 << 19) +#define MFP_LPM_EDGE_BOTH (0x3 << 19) +#define MFP_LPM_EDGE_MASK (0x3 << 19) +#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3) + +#define MFP_PULL_NONE (0x0 << 21) +#define MFP_PULL_LOW (0x1 << 21) +#define MFP_PULL_HIGH (0x2 << 21) +#define MFP_PULL_BOTH (0x3 << 21) +#define MFP_PULL_FLOAT (0x4 << 21) +#define MFP_PULL_MASK (0x7 << 21) +#define MFP_PULL(x) (((x) >> 21) & 0x7) + +#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\ + MFP_LPM_EDGE_NONE | MFP_PULL_NONE) + +#define MFP_CFG(pin, af) \ + ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af)) + +#define MFP_CFG_DRV(pin, af, drv) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv)) + +#define MFP_CFG_LPM(pin, af, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm)) + +#define MFP_CFG_X(pin, af, drv, lpm) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm)) + +#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP) +/* + * each MFP pin will have a MFPR register, since the offset of the + * register varies between processors, the processor specific code + * should initialize the pin offsets by mfp_init() + * + * mfp_init_base() - accepts a virtual base for all MFPR registers and + * initialize the MFP table to a default state + * + * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which + * represents a range of MFP pins from "start" to "end", with the offset + * beginning at "offset", to define a single pin, let "end" = -1. + * + * use + * + * MFP_ADDR_X() to define a range of pins + * MFP_ADDR() to define a single pin + * MFP_ADDR_END to signal the end of pin offset definitions + */ +struct mfp_addr_map { + unsigned int start; + unsigned int end; + unsigned long offset; +}; + +#define MFP_ADDR_X(start, end, offset) \ + { MFP_PIN_##start, MFP_PIN_##end, offset } + +#define MFP_ADDR(pin, offset) \ + { MFP_PIN_##pin, -1, offset } + +#define MFP_ADDR_END { MFP_PIN_INVALID, 0 } + +void mfp_init_base(void __iomem *mfpr_base); +void mfp_init_addr(struct mfp_addr_map *map); + +/* + * mfp_{read, write}() - for direct read/write access to the MFPR register + * mfp_config() - for configuring a group of MFPR registers + * mfp_config_lpm() - configuring all low power MFPR registers for suspend + * mfp_config_run() - configuring all run time MFPR registers after resume + */ +unsigned long mfp_read(int mfp); +void mfp_write(int mfp, unsigned long mfpr_val); +void mfp_config(unsigned long *mfp_cfgs, int num); +void mfp_config_run(void); +void mfp_config_lpm(void); +#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */ + +#endif /* __ASM_PLAT_MFP_H */ diff --git a/include/linux/soc/pxa/smemc.h b/include/linux/soc/pxa/smemc.h new file mode 100644 index 000000000..f1ffea236 --- /dev/null +++ b/include/linux/soc/pxa/smemc.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __PXA_REGS_H +#define __PXA_REGS_H + +#include <linux/types.h> + +void pxa_smemc_set_pcmcia_timing(int sock, u32 mcmem, u32 mcatt, u32 mcio); +void pxa_smemc_set_pcmcia_socket(int nr); +int pxa2xx_smemc_get_sdram_rows(void); +unsigned int pxa3xx_smemc_get_memclkdiv(void); +void __iomem *pxa_smemc_get_mdrefr(void); + +#endif diff --git a/include/linux/soc/qcom/apr.h b/include/linux/soc/qcom/apr.h new file mode 100644 index 000000000..23c5b30f3 --- /dev/null +++ b/include/linux/soc/qcom/apr.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __QCOM_APR_H_ +#define __QCOM_APR_H_ + +#include <linux/spinlock.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/soc/qcom,gpr.h> + +extern struct bus_type aprbus; + +#define APR_HDR_LEN(hdr_len) ((hdr_len)/4) + +/* + * HEADER field + * version:0:3 + * header_size : 4:7 + * message_type : 8:9 + * reserved: 10:15 + */ +#define APR_HDR_FIELD(msg_type, hdr_len, ver)\ + (((msg_type & 0x3) << 8) | ((hdr_len & 0xF) << 4) | (ver & 0xF)) + +#define APR_HDR_SIZE sizeof(struct apr_hdr) +#define APR_SEQ_CMD_HDR_FIELD APR_HDR_FIELD(APR_MSG_TYPE_SEQ_CMD, \ + APR_HDR_LEN(APR_HDR_SIZE), \ + APR_PKT_VER) +/* Version */ +#define APR_PKT_VER 0x0 + +/* Command and Response Types */ +#define APR_MSG_TYPE_EVENT 0x0 +#define APR_MSG_TYPE_CMD_RSP 0x1 +#define APR_MSG_TYPE_SEQ_CMD 0x2 +#define APR_MSG_TYPE_NSEQ_CMD 0x3 +#define APR_MSG_TYPE_MAX 0x04 + +/* APR Basic Response Message */ +#define APR_BASIC_RSP_RESULT 0x000110E8 +#define APR_RSP_ACCEPTED 0x000100BE + +struct aprv2_ibasic_rsp_result_t { + uint32_t opcode; + uint32_t status; +}; + +/* hdr field Ver [0:3], Size [4:7], Message type [8:10] */ +#define APR_HDR_FIELD_VER(h) (h & 0x000F) +#define APR_HDR_FIELD_SIZE(h) ((h & 0x00F0) >> 4) +#define APR_HDR_FIELD_SIZE_BYTES(h) (((h & 0x00F0) >> 4) * 4) +#define APR_HDR_FIELD_MT(h) ((h & 0x0300) >> 8) + +struct apr_hdr { + uint16_t hdr_field; + uint16_t pkt_size; + uint8_t src_svc; + uint8_t src_domain; + uint16_t src_port; + uint8_t dest_svc; + uint8_t dest_domain; + uint16_t dest_port; + uint32_t token; + uint32_t opcode; +} __packed; + +struct apr_pkt { + struct apr_hdr hdr; + uint8_t payload[]; +}; + +struct apr_resp_pkt { + struct apr_hdr hdr; + void *payload; + int payload_size; +}; + +struct gpr_hdr { + uint32_t version:4; + uint32_t hdr_size:4; + uint32_t pkt_size:24; + uint32_t dest_domain:8; + uint32_t src_domain:8; + uint32_t reserved:16; + uint32_t src_port; + uint32_t dest_port; + uint32_t token; + uint32_t opcode; +} __packed; + +struct gpr_pkt { + struct gpr_hdr hdr; + uint32_t payload[]; +}; + +struct gpr_resp_pkt { + struct gpr_hdr hdr; + void *payload; + int payload_size; +}; + +#define GPR_HDR_SIZE sizeof(struct gpr_hdr) +#define GPR_PKT_VER 0x0 +#define GPR_PKT_HEADER_WORD_SIZE ((sizeof(struct gpr_pkt) + 3) >> 2) +#define GPR_PKT_HEADER_BYTE_SIZE (GPR_PKT_HEADER_WORD_SIZE << 2) + +#define GPR_BASIC_RSP_RESULT 0x02001005 + +struct gpr_ibasic_rsp_result_t { + uint32_t opcode; + uint32_t status; +}; + +#define GPR_BASIC_EVT_ACCEPTED 0x02001006 + +struct gpr_ibasic_rsp_accepted_t { + uint32_t opcode; +}; + +/* Bits 0 to 15 -- Minor version, Bits 16 to 31 -- Major version */ +#define APR_SVC_MAJOR_VERSION(v) ((v >> 16) & 0xFF) +#define APR_SVC_MINOR_VERSION(v) (v & 0xFF) + +typedef int (*gpr_port_cb) (struct gpr_resp_pkt *d, void *priv, int op); +struct packet_router; +struct pkt_router_svc { + struct device *dev; + gpr_port_cb callback; + struct packet_router *pr; + spinlock_t lock; + int id; + void *priv; +}; + +typedef struct pkt_router_svc gpr_port_t; + +struct apr_device { + struct device dev; + uint16_t svc_id; + uint16_t domain_id; + uint32_t version; + char name[APR_NAME_SIZE]; + const char *service_path; + struct pkt_router_svc svc; + struct list_head node; +}; + +typedef struct apr_device gpr_device_t; + +#define to_apr_device(d) container_of(d, struct apr_device, dev) +#define svc_to_apr_device(d) container_of(d, struct apr_device, svc) + +struct apr_driver { + int (*probe)(struct apr_device *sl); + int (*remove)(struct apr_device *sl); + int (*callback)(struct apr_device *a, + struct apr_resp_pkt *d); + int (*gpr_callback)(struct gpr_resp_pkt *d, void *data, int op); + struct device_driver driver; + const struct apr_device_id *id_table; +}; + +typedef struct apr_driver gpr_driver_t; +#define to_apr_driver(d) container_of(d, struct apr_driver, driver) + +/* + * use a macro to avoid include chaining to get THIS_MODULE + */ +#define apr_driver_register(drv) __apr_driver_register(drv, THIS_MODULE) + +int __apr_driver_register(struct apr_driver *drv, struct module *owner); +void apr_driver_unregister(struct apr_driver *drv); + +/** + * module_apr_driver() - Helper macro for registering a aprbus driver + * @__apr_driver: apr_driver struct + * + * Helper macro for aprbus drivers which do not do anything special in + * module init/exit. This eliminates a lot of boilerplate. Each module + * may only use this macro once, and calling it replaces module_init() + * and module_exit() + */ +#define module_apr_driver(__apr_driver) \ + module_driver(__apr_driver, apr_driver_register, \ + apr_driver_unregister) +#define module_gpr_driver(__gpr_driver) module_apr_driver(__gpr_driver) + +int apr_send_pkt(struct apr_device *adev, struct apr_pkt *pkt); + +gpr_port_t *gpr_alloc_port(gpr_device_t *gdev, struct device *dev, + gpr_port_cb cb, void *priv); +void gpr_free_port(gpr_port_t *port); +int gpr_send_port_pkt(gpr_port_t *port, struct gpr_pkt *pkt); +int gpr_send_pkt(gpr_device_t *gdev, struct gpr_pkt *pkt); + +#endif /* __QCOM_APR_H_ */ diff --git a/include/linux/soc/qcom/irq.h b/include/linux/soc/qcom/irq.h new file mode 100644 index 000000000..72b9231e9 --- /dev/null +++ b/include/linux/soc/qcom/irq.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __QCOM_IRQ_H +#define __QCOM_IRQ_H + +#include <linux/irqdomain.h> + +#define GPIO_NO_WAKE_IRQ ~0U + +/* + * QCOM specific IRQ domain flags that distinguishes the handling of wakeup + * capable interrupts by different interrupt controllers. + * + * IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP: Line must be masked at TLMM and the + * interrupt configuration is done at PDC + * IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP: Interrupt configuration is handled at TLMM + */ +#define IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP (IRQ_DOMAIN_FLAG_NONCORE << 0) +#define IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP (IRQ_DOMAIN_FLAG_NONCORE << 1) + +/** + * irq_domain_qcom_handle_wakeup: Return if the domain handles interrupt + * configuration + * @d: irq domain + * + * This QCOM specific irq domain call returns if the interrupt controller + * requires the interrupt be masked at the child interrupt controller. + */ +static inline bool irq_domain_qcom_handle_wakeup(const struct irq_domain *d) +{ + return (d->flags & IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP); +} + +#endif diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h new file mode 100644 index 000000000..af093281e --- /dev/null +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * + */ + +#include <linux/platform_device.h> +#ifndef __LLCC_QCOM__ +#define __LLCC_QCOM__ + +#define LLCC_CPUSS 1 +#define LLCC_VIDSC0 2 +#define LLCC_VIDSC1 3 +#define LLCC_ROTATOR 4 +#define LLCC_VOICE 5 +#define LLCC_AUDIO 6 +#define LLCC_MDMHPGRW 7 +#define LLCC_MDM 8 +#define LLCC_MODHW 9 +#define LLCC_CMPT 10 +#define LLCC_GPUHTW 11 +#define LLCC_GPU 12 +#define LLCC_MMUHWT 13 +#define LLCC_CMPTDMA 15 +#define LLCC_DISP 16 +#define LLCC_VIDFW 17 +#define LLCC_MDMHPFX 20 +#define LLCC_MDMPNG 21 +#define LLCC_AUDHW 22 +#define LLCC_NPU 23 +#define LLCC_WLHW 24 +#define LLCC_PIMEM 25 +#define LLCC_DRE 26 +#define LLCC_CVP 28 +#define LLCC_MODPE 29 +#define LLCC_APTCM 30 +#define LLCC_WRCACHE 31 +#define LLCC_CVPFW 32 +#define LLCC_CPUSS1 33 +#define LLCC_CAMEXP0 34 +#define LLCC_CPUMTE 35 +#define LLCC_CPUHWT 36 +#define LLCC_MDMCLAD2 37 +#define LLCC_CAMEXP1 38 +#define LLCC_AENPU 45 + +/** + * struct llcc_slice_desc - Cache slice descriptor + * @slice_id: llcc slice id + * @slice_size: Size allocated for the llcc slice + */ +struct llcc_slice_desc { + u32 slice_id; + size_t slice_size; +}; + +/** + * struct llcc_edac_reg_data - llcc edac registers data for each error type + * @name: Name of the error + * @reg_cnt: Number of registers + * @count_mask: Mask value to get the error count + * @ways_mask: Mask value to get the error ways + * @count_shift: Shift value to get the error count + * @ways_shift: Shift value to get the error ways + */ +struct llcc_edac_reg_data { + char *name; + u32 reg_cnt; + u32 count_mask; + u32 ways_mask; + u8 count_shift; + u8 ways_shift; +}; + +struct llcc_edac_reg_offset { + /* LLCC TRP registers */ + u32 trp_ecc_error_status0; + u32 trp_ecc_error_status1; + u32 trp_ecc_sb_err_syn0; + u32 trp_ecc_db_err_syn0; + u32 trp_ecc_error_cntr_clear; + u32 trp_interrupt_0_status; + u32 trp_interrupt_0_clear; + u32 trp_interrupt_0_enable; + + /* LLCC Common registers */ + u32 cmn_status0; + u32 cmn_interrupt_0_enable; + u32 cmn_interrupt_2_enable; + + /* LLCC DRP registers */ + u32 drp_ecc_error_cfg; + u32 drp_ecc_error_cntr_clear; + u32 drp_interrupt_status; + u32 drp_interrupt_clear; + u32 drp_interrupt_enable; + u32 drp_ecc_error_status0; + u32 drp_ecc_error_status1; + u32 drp_ecc_sb_err_syn0; + u32 drp_ecc_db_err_syn0; +}; + +/** + * struct llcc_drv_data - Data associated with the llcc driver + * @regmaps: regmaps associated with the llcc device + * @bcast_regmap: regmap associated with llcc broadcast offset + * @cfg: pointer to the data structure for slice configuration + * @edac_reg_offset: Offset of the LLCC EDAC registers + * @lock: mutex associated with each slice + * @cfg_size: size of the config data table + * @max_slices: max slices as read from device tree + * @num_banks: Number of llcc banks + * @bitmap: Bit map to track the active slice ids + * @ecc_irq: interrupt for llcc cache error detection and reporting + * @version: Indicates the LLCC version + */ +struct llcc_drv_data { + struct regmap **regmaps; + struct regmap *bcast_regmap; + const struct llcc_slice_config *cfg; + const struct llcc_edac_reg_offset *edac_reg_offset; + struct mutex lock; + u32 cfg_size; + u32 max_slices; + u32 num_banks; + unsigned long *bitmap; + int ecc_irq; + u32 version; +}; + +#if IS_ENABLED(CONFIG_QCOM_LLCC) +/** + * llcc_slice_getd - get llcc slice descriptor + * @uid: usecase_id of the client + */ +struct llcc_slice_desc *llcc_slice_getd(u32 uid); + +/** + * llcc_slice_putd - llcc slice descritpor + * @desc: Pointer to llcc slice descriptor + */ +void llcc_slice_putd(struct llcc_slice_desc *desc); + +/** + * llcc_get_slice_id - get slice id + * @desc: Pointer to llcc slice descriptor + */ +int llcc_get_slice_id(struct llcc_slice_desc *desc); + +/** + * llcc_get_slice_size - llcc slice size + * @desc: Pointer to llcc slice descriptor + */ +size_t llcc_get_slice_size(struct llcc_slice_desc *desc); + +/** + * llcc_slice_activate - Activate the llcc slice + * @desc: Pointer to llcc slice descriptor + */ +int llcc_slice_activate(struct llcc_slice_desc *desc); + +/** + * llcc_slice_deactivate - Deactivate the llcc slice + * @desc: Pointer to llcc slice descriptor + */ +int llcc_slice_deactivate(struct llcc_slice_desc *desc); + +#else +static inline struct llcc_slice_desc *llcc_slice_getd(u32 uid) +{ + return NULL; +} + +static inline void llcc_slice_putd(struct llcc_slice_desc *desc) +{ + +}; + +static inline int llcc_get_slice_id(struct llcc_slice_desc *desc) +{ + return -EINVAL; +} + +static inline size_t llcc_get_slice_size(struct llcc_slice_desc *desc) +{ + return 0; +} +static inline int llcc_slice_activate(struct llcc_slice_desc *desc) +{ + return -EINVAL; +} + +static inline int llcc_slice_deactivate(struct llcc_slice_desc *desc) +{ + return -EINVAL; +} +#endif + +#endif diff --git a/include/linux/soc/qcom/mdt_loader.h b/include/linux/soc/qcom/mdt_loader.h new file mode 100644 index 000000000..9e8e60421 --- /dev/null +++ b/include/linux/soc/qcom/mdt_loader.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __QCOM_MDT_LOADER_H__ +#define __QCOM_MDT_LOADER_H__ + +#include <linux/types.h> + +#define QCOM_MDT_TYPE_MASK (7 << 24) +#define QCOM_MDT_TYPE_HASH (2 << 24) +#define QCOM_MDT_RELOCATABLE BIT(27) + +struct device; +struct firmware; +struct qcom_scm_pas_metadata; + +#if IS_ENABLED(CONFIG_QCOM_MDT_LOADER) + +ssize_t qcom_mdt_get_size(const struct firmware *fw); +int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw, + const char *fw_name, int pas_id, phys_addr_t mem_phys, + struct qcom_scm_pas_metadata *pas_metadata_ctx); +int qcom_mdt_load(struct device *dev, const struct firmware *fw, + const char *fw_name, int pas_id, void *mem_region, + phys_addr_t mem_phys, size_t mem_size, + phys_addr_t *reloc_base); + +int qcom_mdt_load_no_init(struct device *dev, const struct firmware *fw, + const char *fw_name, int pas_id, void *mem_region, + phys_addr_t mem_phys, size_t mem_size, + phys_addr_t *reloc_base); +void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len, + const char *fw_name, struct device *dev); + +#else /* !IS_ENABLED(CONFIG_QCOM_MDT_LOADER) */ + +static inline ssize_t qcom_mdt_get_size(const struct firmware *fw) +{ + return -ENODEV; +} + +static inline int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw, + const char *fw_name, int pas_id, phys_addr_t mem_phys, + struct qcom_scm_pas_metadata *pas_metadata_ctx) +{ + return -ENODEV; +} + +static inline int qcom_mdt_load(struct device *dev, const struct firmware *fw, + const char *fw_name, int pas_id, + void *mem_region, phys_addr_t mem_phys, + size_t mem_size, phys_addr_t *reloc_base) +{ + return -ENODEV; +} + +static inline int qcom_mdt_load_no_init(struct device *dev, + const struct firmware *fw, + const char *fw_name, int pas_id, + void *mem_region, phys_addr_t mem_phys, + size_t mem_size, + phys_addr_t *reloc_base) +{ + return -ENODEV; +} + +static inline void *qcom_mdt_read_metadata(const struct firmware *fw, + size_t *data_len, const char *fw_name, + struct device *dev) +{ + return ERR_PTR(-ENODEV); +} + +#endif /* !IS_ENABLED(CONFIG_QCOM_MDT_LOADER) */ + +#endif diff --git a/include/linux/soc/qcom/pdr.h b/include/linux/soc/qcom/pdr.h new file mode 100644 index 000000000..83a8ea612 --- /dev/null +++ b/include/linux/soc/qcom/pdr.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __QCOM_PDR_HELPER__ +#define __QCOM_PDR_HELPER__ + +#include <linux/soc/qcom/qmi.h> + +#define SERVREG_NAME_LENGTH 64 + +struct pdr_service; +struct pdr_handle; + +enum servreg_service_state { + SERVREG_LOCATOR_ERR = 0x1, + SERVREG_SERVICE_STATE_DOWN = 0x0FFFFFFF, + SERVREG_SERVICE_STATE_UP = 0x1FFFFFFF, + SERVREG_SERVICE_STATE_EARLY_DOWN = 0x2FFFFFFF, + SERVREG_SERVICE_STATE_UNINIT = 0x7FFFFFFF, +}; + +struct pdr_handle *pdr_handle_alloc(void (*status)(int state, + char *service_path, + void *priv), void *priv); +struct pdr_service *pdr_add_lookup(struct pdr_handle *pdr, + const char *service_name, + const char *service_path); +int pdr_restart_pd(struct pdr_handle *pdr, struct pdr_service *pds); +void pdr_handle_release(struct pdr_handle *pdr); + +#endif diff --git a/include/linux/soc/qcom/qcom_aoss.h b/include/linux/soc/qcom/qcom_aoss.h new file mode 100644 index 000000000..3c2a82e60 --- /dev/null +++ b/include/linux/soc/qcom/qcom_aoss.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#ifndef __QCOM_AOSS_H__ +#define __QCOM_AOSS_H__ + +#include <linux/err.h> +#include <linux/device.h> + +struct qmp; + +#if IS_ENABLED(CONFIG_QCOM_AOSS_QMP) + +int qmp_send(struct qmp *qmp, const void *data, size_t len); +struct qmp *qmp_get(struct device *dev); +void qmp_put(struct qmp *qmp); + +#else + +static inline int qmp_send(struct qmp *qmp, const void *data, size_t len) +{ + return -ENODEV; +} + +static inline struct qmp *qmp_get(struct device *dev) +{ + return ERR_PTR(-ENODEV); +} + +static inline void qmp_put(struct qmp *qmp) +{ +} + +#endif + +#endif diff --git a/include/linux/soc/qcom/qmi.h b/include/linux/soc/qcom/qmi.h new file mode 100644 index 000000000..469e02d2a --- /dev/null +++ b/include/linux/soc/qcom/qmi.h @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. + * Copyright (c) 2017, Linaro Ltd. + */ +#ifndef __QMI_HELPERS_H__ +#define __QMI_HELPERS_H__ + +#include <linux/completion.h> +#include <linux/idr.h> +#include <linux/list.h> +#include <linux/qrtr.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +struct socket; + +/** + * struct qmi_header - wireformat header of QMI messages + * @type: type of message + * @txn_id: transaction id + * @msg_id: message id + * @msg_len: length of message payload following header + */ +struct qmi_header { + u8 type; + u16 txn_id; + u16 msg_id; + u16 msg_len; +} __packed; + +#define QMI_REQUEST 0 +#define QMI_RESPONSE 2 +#define QMI_INDICATION 4 + +#define QMI_COMMON_TLV_TYPE 0 + +enum qmi_elem_type { + QMI_EOTI, + QMI_OPT_FLAG, + QMI_DATA_LEN, + QMI_UNSIGNED_1_BYTE, + QMI_UNSIGNED_2_BYTE, + QMI_UNSIGNED_4_BYTE, + QMI_UNSIGNED_8_BYTE, + QMI_SIGNED_2_BYTE_ENUM, + QMI_SIGNED_4_BYTE_ENUM, + QMI_STRUCT, + QMI_STRING, +}; + +enum qmi_array_type { + NO_ARRAY, + STATIC_ARRAY, + VAR_LEN_ARRAY, +}; + +/** + * struct qmi_elem_info - describes how to encode a single QMI element + * @data_type: Data type of this element. + * @elem_len: Array length of this element, if an array. + * @elem_size: Size of a single instance of this data type. + * @array_type: Array type of this element. + * @tlv_type: QMI message specific type to identify which element + * is present in an incoming message. + * @offset: Specifies the offset of the first instance of this + * element in the data structure. + * @ei_array: Null-terminated array of @qmi_elem_info to describe nested + * structures. + */ +struct qmi_elem_info { + enum qmi_elem_type data_type; + u32 elem_len; + u32 elem_size; + enum qmi_array_type array_type; + u8 tlv_type; + u32 offset; + const struct qmi_elem_info *ei_array; +}; + +#define QMI_RESULT_SUCCESS_V01 0 +#define QMI_RESULT_FAILURE_V01 1 + +#define QMI_ERR_NONE_V01 0 +#define QMI_ERR_MALFORMED_MSG_V01 1 +#define QMI_ERR_NO_MEMORY_V01 2 +#define QMI_ERR_INTERNAL_V01 3 +#define QMI_ERR_CLIENT_IDS_EXHAUSTED_V01 5 +#define QMI_ERR_INVALID_ID_V01 41 +#define QMI_ERR_ENCODING_V01 58 +#define QMI_ERR_DISABLED_V01 69 +#define QMI_ERR_INCOMPATIBLE_STATE_V01 90 +#define QMI_ERR_NOT_SUPPORTED_V01 94 + +/** + * struct qmi_response_type_v01 - common response header (decoded) + * @result: result of the transaction + * @error: error value, when @result is QMI_RESULT_FAILURE_V01 + */ +struct qmi_response_type_v01 { + u16 result; + u16 error; +}; + +extern const struct qmi_elem_info qmi_response_type_v01_ei[]; + +/** + * struct qmi_service - context to track lookup-results + * @service: service type + * @version: version of the @service + * @instance: instance id of the @service + * @node: node of the service + * @port: port of the service + * @priv: handle for client's use + * @list_node: list_head for house keeping + */ +struct qmi_service { + unsigned int service; + unsigned int version; + unsigned int instance; + + unsigned int node; + unsigned int port; + + void *priv; + struct list_head list_node; +}; + +struct qmi_handle; + +/** + * struct qmi_ops - callbacks for qmi_handle + * @new_server: inform client of a new_server lookup-result, returning + * successfully from this call causes the library to call + * @del_server as the service is removed from the + * lookup-result. @priv of the qmi_service can be used by + * the client + * @del_server: inform client of a del_server lookup-result + * @net_reset: inform client that the name service was restarted and + * that and any state needs to be released + * @msg_handler: invoked for incoming messages, allows a client to + * override the usual QMI message handler + * @bye: inform a client that all clients from a node are gone + * @del_client: inform a client that a particular client is gone + */ +struct qmi_ops { + int (*new_server)(struct qmi_handle *qmi, struct qmi_service *svc); + void (*del_server)(struct qmi_handle *qmi, struct qmi_service *svc); + void (*net_reset)(struct qmi_handle *qmi); + void (*msg_handler)(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + const void *data, size_t count); + void (*bye)(struct qmi_handle *qmi, unsigned int node); + void (*del_client)(struct qmi_handle *qmi, + unsigned int node, unsigned int port); +}; + +/** + * struct qmi_txn - transaction context + * @qmi: QMI handle this transaction is associated with + * @id: transaction id + * @lock: for synchronization between handler and waiter of messages + * @completion: completion object as the transaction receives a response + * @result: result code for the completed transaction + * @ei: description of the QMI encoded response (optional) + * @dest: destination buffer to decode message into (optional) + */ +struct qmi_txn { + struct qmi_handle *qmi; + + u16 id; + + struct mutex lock; + struct completion completion; + int result; + + const struct qmi_elem_info *ei; + void *dest; +}; + +/** + * struct qmi_msg_handler - description of QMI message handler + * @type: type of message + * @msg_id: message id + * @ei: description of the QMI encoded message + * @decoded_size: size of the decoded object + * @fn: function to invoke as the message is decoded + */ +struct qmi_msg_handler { + unsigned int type; + unsigned int msg_id; + + const struct qmi_elem_info *ei; + + size_t decoded_size; + void (*fn)(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, const void *decoded); +}; + +/** + * struct qmi_handle - QMI context + * @sock: socket handle + * @sock_lock: synchronization of @sock modifications + * @sq: sockaddr of @sock + * @work: work for handling incoming messages + * @wq: workqueue to post @work on + * @recv_buf: scratch buffer for handling incoming messages + * @recv_buf_size: size of @recv_buf + * @lookups: list of registered lookup requests + * @lookup_results: list of lookup-results advertised to the client + * @services: list of registered services (by this client) + * @ops: reference to callbacks + * @txns: outstanding transactions + * @txn_lock: lock for modifications of @txns + * @handlers: list of handlers for incoming messages + */ +struct qmi_handle { + struct socket *sock; + struct mutex sock_lock; + + struct sockaddr_qrtr sq; + + struct work_struct work; + struct workqueue_struct *wq; + + void *recv_buf; + size_t recv_buf_size; + + struct list_head lookups; + struct list_head lookup_results; + struct list_head services; + + struct qmi_ops ops; + + struct idr txns; + struct mutex txn_lock; + + const struct qmi_msg_handler *handlers; +}; + +int qmi_add_lookup(struct qmi_handle *qmi, unsigned int service, + unsigned int version, unsigned int instance); +int qmi_add_server(struct qmi_handle *qmi, unsigned int service, + unsigned int version, unsigned int instance); + +int qmi_handle_init(struct qmi_handle *qmi, size_t max_msg_len, + const struct qmi_ops *ops, + const struct qmi_msg_handler *handlers); +void qmi_handle_release(struct qmi_handle *qmi); + +ssize_t qmi_send_request(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, int msg_id, size_t len, + const struct qmi_elem_info *ei, const void *c_struct); +ssize_t qmi_send_response(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + struct qmi_txn *txn, int msg_id, size_t len, + const struct qmi_elem_info *ei, const void *c_struct); +ssize_t qmi_send_indication(struct qmi_handle *qmi, struct sockaddr_qrtr *sq, + int msg_id, size_t len, const struct qmi_elem_info *ei, + const void *c_struct); + +void *qmi_encode_message(int type, unsigned int msg_id, size_t *len, + unsigned int txn_id, const struct qmi_elem_info *ei, + const void *c_struct); + +int qmi_decode_message(const void *buf, size_t len, + const struct qmi_elem_info *ei, void *c_struct); + +int qmi_txn_init(struct qmi_handle *qmi, struct qmi_txn *txn, + const struct qmi_elem_info *ei, void *c_struct); +int qmi_txn_wait(struct qmi_txn *txn, unsigned long timeout); +void qmi_txn_cancel(struct qmi_txn *txn); + +#endif diff --git a/include/linux/soc/qcom/smd-rpm.h b/include/linux/soc/qcom/smd-rpm.h new file mode 100644 index 000000000..3ab8c07f7 --- /dev/null +++ b/include/linux/soc/qcom/smd-rpm.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __QCOM_SMD_RPM_H__ +#define __QCOM_SMD_RPM_H__ + +struct qcom_smd_rpm; + +#define QCOM_SMD_RPM_ACTIVE_STATE 0 +#define QCOM_SMD_RPM_SLEEP_STATE 1 + +/* + * Constants used for addressing resources in the RPM. + */ +#define QCOM_SMD_RPM_BBYB 0x62796262 +#define QCOM_SMD_RPM_BOBB 0x62626f62 +#define QCOM_SMD_RPM_BOOST 0x61747362 +#define QCOM_SMD_RPM_BUS_CLK 0x316b6c63 +#define QCOM_SMD_RPM_BUS_MASTER 0x73616d62 +#define QCOM_SMD_RPM_BUS_SLAVE 0x766c7362 +#define QCOM_SMD_RPM_CLK_BUF_A 0x616B6C63 +#define QCOM_SMD_RPM_LDOA 0x616f646c +#define QCOM_SMD_RPM_LDOB 0x626F646C +#define QCOM_SMD_RPM_RWCX 0x78637772 +#define QCOM_SMD_RPM_RWMX 0x786d7772 +#define QCOM_SMD_RPM_RWLC 0x636c7772 +#define QCOM_SMD_RPM_RWLM 0x6d6c7772 +#define QCOM_SMD_RPM_MEM_CLK 0x326b6c63 +#define QCOM_SMD_RPM_MISC_CLK 0x306b6c63 +#define QCOM_SMD_RPM_NCPA 0x6170636E +#define QCOM_SMD_RPM_NCPB 0x6270636E +#define QCOM_SMD_RPM_OCMEM_PWR 0x706d636f +#define QCOM_SMD_RPM_QPIC_CLK 0x63697071 +#define QCOM_SMD_RPM_QUP_CLK 0x707571 +#define QCOM_SMD_RPM_SMPA 0x61706d73 +#define QCOM_SMD_RPM_SMPB 0x62706d73 +#define QCOM_SMD_RPM_SPDM 0x63707362 +#define QCOM_SMD_RPM_VSA 0x00617376 +#define QCOM_SMD_RPM_MMAXI_CLK 0x69786d6d +#define QCOM_SMD_RPM_IPA_CLK 0x617069 +#define QCOM_SMD_RPM_CE_CLK 0x6563 +#define QCOM_SMD_RPM_AGGR_CLK 0x72676761 +#define QCOM_SMD_RPM_HWKM_CLK 0x6d6b7768 +#define QCOM_SMD_RPM_PKA_CLK 0x616b70 +#define QCOM_SMD_RPM_MCFG_CLK 0x6766636d +#define QCOM_SMD_RPM_MMXI_CLK 0x69786d6d + +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm, + int state, + u32 resource_type, u32 resource_id, + void *buf, size_t count); + +#endif diff --git a/include/linux/soc/qcom/smem.h b/include/linux/soc/qcom/smem.h new file mode 100644 index 000000000..86e1b3586 --- /dev/null +++ b/include/linux/soc/qcom/smem.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __QCOM_SMEM_H__ +#define __QCOM_SMEM_H__ + +#define QCOM_SMEM_HOST_ANY -1 + +int qcom_smem_alloc(unsigned host, unsigned item, size_t size); +void *qcom_smem_get(unsigned host, unsigned item, size_t *size); + +int qcom_smem_get_free_space(unsigned host); + +phys_addr_t qcom_smem_virt_to_phys(void *p); + +#endif diff --git a/include/linux/soc/qcom/smem_state.h b/include/linux/soc/qcom/smem_state.h new file mode 100644 index 000000000..652c0158b --- /dev/null +++ b/include/linux/soc/qcom/smem_state.h @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __QCOM_SMEM_STATE__ +#define __QCOM_SMEM_STATE__ + +#include <linux/err.h> + +struct device_node; +struct qcom_smem_state; + +struct qcom_smem_state_ops { + int (*update_bits)(void *, u32, u32); +}; + +#ifdef CONFIG_QCOM_SMEM_STATE + +struct qcom_smem_state *qcom_smem_state_get(struct device *dev, const char *con_id, unsigned *bit); +struct qcom_smem_state *devm_qcom_smem_state_get(struct device *dev, const char *con_id, unsigned *bit); +void qcom_smem_state_put(struct qcom_smem_state *); + +int qcom_smem_state_update_bits(struct qcom_smem_state *state, u32 mask, u32 value); + +struct qcom_smem_state *qcom_smem_state_register(struct device_node *of_node, const struct qcom_smem_state_ops *ops, void *data); +void qcom_smem_state_unregister(struct qcom_smem_state *state); + +#else + +static inline struct qcom_smem_state *qcom_smem_state_get(struct device *dev, + const char *con_id, unsigned *bit) +{ + return ERR_PTR(-EINVAL); +} + +static inline struct qcom_smem_state *devm_qcom_smem_state_get(struct device *dev, + const char *con_id, + unsigned *bit) +{ + return ERR_PTR(-EINVAL); +} + +static inline void qcom_smem_state_put(struct qcom_smem_state *state) +{ +} + +static inline int qcom_smem_state_update_bits(struct qcom_smem_state *state, + u32 mask, u32 value) +{ + return -EINVAL; +} + +static inline struct qcom_smem_state *qcom_smem_state_register(struct device_node *of_node, + const struct qcom_smem_state_ops *ops, void *data) +{ + return ERR_PTR(-EINVAL); +} + +static inline void qcom_smem_state_unregister(struct qcom_smem_state *state) +{ +} + +#endif + +#endif diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h new file mode 100644 index 000000000..bbeb6b9c0 --- /dev/null +++ b/include/linux/soc/qcom/wcnss_ctrl.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __WCNSS_CTRL_H__ +#define __WCNSS_CTRL_H__ + +#include <linux/rpmsg.h> + +#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL) + +struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, + rpmsg_rx_cb_t cb, void *priv); + +#else + +static struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, + const char *name, + rpmsg_rx_cb_t cb, + void *priv) +{ + WARN_ON(1); + return ERR_PTR(-ENXIO); +} + +#endif + +#endif diff --git a/include/linux/soc/renesas/r9a06g032-sysctrl.h b/include/linux/soc/renesas/r9a06g032-sysctrl.h new file mode 100644 index 000000000..066dfb15c --- /dev/null +++ b/include/linux/soc/renesas/r9a06g032-sysctrl.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ +#define __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ + +#ifdef CONFIG_CLK_R9A06G032 +int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val); +#else +static inline int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) { return -ENODEV; } +#endif + +#endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ */ diff --git a/include/linux/soc/renesas/rcar-rst.h b/include/linux/soc/renesas/rcar-rst.h new file mode 100644 index 000000000..1f1fe8bfa --- /dev/null +++ b/include/linux/soc/renesas/rcar-rst.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__ +#define __LINUX_SOC_RENESAS_RCAR_RST_H__ + +#ifdef CONFIG_RST_RCAR +int rcar_rst_read_mode_pins(u32 *mode); +int rcar_rst_set_rproc_boot_addr(u64 boot_addr); +#else +static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; } +static inline int rcar_rst_set_rproc_boot_addr(u64 boot_addr) { return -ENODEV; } +#endif + +#endif /* __LINUX_SOC_RENESAS_RCAR_RST_H__ */ diff --git a/include/linux/soc/renesas/rcar-sysc.h b/include/linux/soc/renesas/rcar-sysc.h new file mode 100644 index 000000000..00fae6fd2 --- /dev/null +++ b/include/linux/soc/renesas/rcar-sysc.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __LINUX_SOC_RENESAS_RCAR_SYSC_H__ +#define __LINUX_SOC_RENESAS_RCAR_SYSC_H__ + +int rcar_sysc_power_down_cpu(unsigned int cpu); +int rcar_sysc_power_up_cpu(unsigned int cpu); + +#endif /* __LINUX_SOC_RENESAS_RCAR_SYSC_H__ */ diff --git a/include/linux/soc/samsung/exynos-chipid.h b/include/linux/soc/samsung/exynos-chipid.h new file mode 100644 index 000000000..62f0e2531 --- /dev/null +++ b/include/linux/soc/samsung/exynos-chipid.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Exynos - CHIPID support + */ +#ifndef __LINUX_SOC_EXYNOS_CHIPID_H +#define __LINUX_SOC_EXYNOS_CHIPID_H + +#define EXYNOS_CHIPID_REG_PRO_ID 0x00 +#define EXYNOS_REV_PART_MASK 0xf +#define EXYNOS_REV_PART_SHIFT 4 +#define EXYNOS_MASK 0xfffff000 + +#define EXYNOS_CHIPID_REG_PKG_ID 0x04 +/* Bit field definitions for EXYNOS_CHIPID_REG_PKG_ID register */ +#define EXYNOS5422_IDS_OFFSET 24 +#define EXYNOS5422_IDS_MASK 0xff +#define EXYNOS5422_USESG_OFFSET 3 +#define EXYNOS5422_USESG_MASK 0x01 +#define EXYNOS5422_SG_OFFSET 0 +#define EXYNOS5422_SG_MASK 0x07 +#define EXYNOS5422_TABLE_OFFSET 8 +#define EXYNOS5422_TABLE_MASK 0x03 +#define EXYNOS5422_SG_A_OFFSET 17 +#define EXYNOS5422_SG_A_MASK 0x0f +#define EXYNOS5422_SG_B_OFFSET 21 +#define EXYNOS5422_SG_B_MASK 0x03 +#define EXYNOS5422_SG_BSIGN_OFFSET 23 +#define EXYNOS5422_SG_BSIGN_MASK 0x01 +#define EXYNOS5422_BIN2_OFFSET 12 +#define EXYNOS5422_BIN2_MASK 0x01 + +#define EXYNOS_CHIPID_REG_LOT_ID 0x14 + +#define EXYNOS_CHIPID_REG_AUX_INFO 0x1c +/* Bit field definitions for EXYNOS_CHIPID_REG_AUX_INFO register */ +#define EXYNOS5422_TMCB_OFFSET 0 +#define EXYNOS5422_TMCB_MASK 0x7f +#define EXYNOS5422_ARM_UP_OFFSET 8 +#define EXYNOS5422_ARM_UP_MASK 0x03 +#define EXYNOS5422_ARM_DN_OFFSET 10 +#define EXYNOS5422_ARM_DN_MASK 0x03 +#define EXYNOS5422_KFC_UP_OFFSET 12 +#define EXYNOS5422_KFC_UP_MASK 0x03 +#define EXYNOS5422_KFC_DN_OFFSET 14 +#define EXYNOS5422_KFC_DN_MASK 0x03 + +#endif /*__LINUX_SOC_EXYNOS_CHIPID_H */ diff --git a/include/linux/soc/samsung/exynos-pmu.h b/include/linux/soc/samsung/exynos-pmu.h new file mode 100644 index 000000000..a4f5516cc --- /dev/null +++ b/include/linux/soc/samsung/exynos-pmu.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Header for Exynos PMU Driver support + */ + +#ifndef __LINUX_SOC_EXYNOS_PMU_H +#define __LINUX_SOC_EXYNOS_PMU_H + +struct regmap; + +enum sys_powerdown { + SYS_AFTR, + SYS_LPA, + SYS_SLEEP, + NUM_SYS_POWERDOWN, +}; + +extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +#ifdef CONFIG_EXYNOS_PMU +extern struct regmap *exynos_get_pmu_regmap(void); +#else +static inline struct regmap *exynos_get_pmu_regmap(void) +{ + return ERR_PTR(-ENODEV); +} +#endif + +#endif /* __LINUX_SOC_EXYNOS_PMU_H */ diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h new file mode 100644 index 000000000..aa840ed04 --- /dev/null +++ b/include/linux/soc/samsung/exynos-regs-pmu.h @@ -0,0 +1,660 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Exynos - Power management unit definition + * + * Notice: + * This is not a list of all Exynos Power Management Unit SFRs. + * There are too many of them, not mentioning subtle differences + * between SoCs. For now, put here only the used registers. + */ + +#ifndef __LINUX_SOC_EXYNOS_REGS_PMU_H +#define __LINUX_SOC_EXYNOS_REGS_PMU_H __FILE__ + +#define S5P_CENTRAL_SEQ_CONFIGURATION 0x0200 + +#define S5P_CENTRAL_LOWPWR_CFG (1 << 16) + +#define S5P_CENTRAL_SEQ_OPTION 0x0208 + +#define S5P_USE_STANDBY_WFI0 (1 << 16) +#define S5P_USE_STANDBY_WFI1 (1 << 17) +#define S5P_USE_STANDBY_WFI2 (1 << 19) +#define S5P_USE_STANDBY_WFI3 (1 << 20) +#define S5P_USE_STANDBY_WFE0 (1 << 24) +#define S5P_USE_STANDBY_WFE1 (1 << 25) +#define S5P_USE_STANDBY_WFE2 (1 << 27) +#define S5P_USE_STANDBY_WFE3 (1 << 28) + +#define S5P_USE_STANDBY_WFI_ALL \ + (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \ + S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \ + S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \ + S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3) + +#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12) + +#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n) +#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28) +#define EXYNOS_SWRESET 0x0400 + +#define S5P_WAKEUP_STAT 0x0600 +/* Value for EXYNOS_EINT_WAKEUP_MASK disabling all external wakeup interrupts */ +#define EXYNOS_EINT_WAKEUP_MASK_DISABLED 0xffffffff +#define EXYNOS_EINT_WAKEUP_MASK 0x0604 +#define S5P_WAKEUP_MASK 0x0608 +#define S5P_WAKEUP_MASK2 0x0614 + +/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */ +#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4) +/* Phy enable bit, common for all phy registers, not only MIPI */ +#define EXYNOS4_PHY_ENABLE (1 << 0) +#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1) +#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2) +#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1) + +#define S5P_INFORM0 0x0800 +#define S5P_INFORM1 0x0804 +#define S5P_INFORM5 0x0814 +#define S5P_INFORM6 0x0818 +#define S5P_INFORM7 0x081C +#define S5P_PMU_SPARE2 0x0908 +#define S5P_PMU_SPARE3 0x090C + +#define EXYNOS_IROM_DATA2 0x0988 +#define S5P_ARM_CORE0_LOWPWR 0x1000 +#define S5P_DIS_IRQ_CORE0 0x1004 +#define S5P_DIS_IRQ_CENTRAL0 0x1008 +#define S5P_ARM_CORE1_LOWPWR 0x1010 +#define S5P_DIS_IRQ_CORE1 0x1014 +#define S5P_DIS_IRQ_CENTRAL1 0x1018 +#define S5P_ARM_COMMON_LOWPWR 0x1080 +#define S5P_L2_0_LOWPWR 0x10C0 +#define S5P_L2_1_LOWPWR 0x10C4 +#define S5P_CMU_ACLKSTOP_LOWPWR 0x1100 +#define S5P_CMU_SCLKSTOP_LOWPWR 0x1104 +#define S5P_CMU_RESET_LOWPWR 0x110C +#define S5P_APLL_SYSCLK_LOWPWR 0x1120 +#define S5P_MPLL_SYSCLK_LOWPWR 0x1124 +#define S5P_VPLL_SYSCLK_LOWPWR 0x1128 +#define S5P_EPLL_SYSCLK_LOWPWR 0x112C +#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR 0x1138 +#define S5P_CMU_RESET_GPSALIVE_LOWPWR 0x113C +#define S5P_CMU_CLKSTOP_CAM_LOWPWR 0x1140 +#define S5P_CMU_CLKSTOP_TV_LOWPWR 0x1144 +#define S5P_CMU_CLKSTOP_MFC_LOWPWR 0x1148 +#define S5P_CMU_CLKSTOP_G3D_LOWPWR 0x114C +#define S5P_CMU_CLKSTOP_LCD0_LOWPWR 0x1150 +#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR 0x1158 +#define S5P_CMU_CLKSTOP_GPS_LOWPWR 0x115C +#define S5P_CMU_RESET_CAM_LOWPWR 0x1160 +#define S5P_CMU_RESET_TV_LOWPWR 0x1164 +#define S5P_CMU_RESET_MFC_LOWPWR 0x1168 +#define S5P_CMU_RESET_G3D_LOWPWR 0x116C +#define S5P_CMU_RESET_LCD0_LOWPWR 0x1170 +#define S5P_CMU_RESET_MAUDIO_LOWPWR 0x1178 +#define S5P_CMU_RESET_GPS_LOWPWR 0x117C +#define S5P_TOP_BUS_LOWPWR 0x1180 +#define S5P_TOP_RETENTION_LOWPWR 0x1184 +#define S5P_TOP_PWR_LOWPWR 0x1188 +#define S5P_LOGIC_RESET_LOWPWR 0x11A0 +#define S5P_ONENAND_MEM_LOWPWR 0x11C0 +#define S5P_G2D_ACP_MEM_LOWPWR 0x11C8 +#define S5P_USBOTG_MEM_LOWPWR 0x11CC +#define S5P_HSMMC_MEM_LOWPWR 0x11D0 +#define S5P_CSSYS_MEM_LOWPWR 0x11D4 +#define S5P_SECSS_MEM_LOWPWR 0x11D8 +#define S5P_PAD_RETENTION_DRAM_LOWPWR 0x1200 +#define S5P_PAD_RETENTION_MAUDIO_LOWPWR 0x1204 +#define S5P_PAD_RETENTION_GPIO_LOWPWR 0x1220 +#define S5P_PAD_RETENTION_UART_LOWPWR 0x1224 +#define S5P_PAD_RETENTION_MMCA_LOWPWR 0x1228 +#define S5P_PAD_RETENTION_MMCB_LOWPWR 0x122C +#define S5P_PAD_RETENTION_EBIA_LOWPWR 0x1230 +#define S5P_PAD_RETENTION_EBIB_LOWPWR 0x1234 +#define S5P_PAD_RETENTION_ISOLATION_LOWPWR 0x1240 +#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR 0x1260 +#define S5P_XUSBXTI_LOWPWR 0x1280 +#define S5P_XXTI_LOWPWR 0x1284 +#define S5P_EXT_REGULATOR_LOWPWR 0x12C0 +#define S5P_GPIO_MODE_LOWPWR 0x1300 +#define S5P_GPIO_MODE_MAUDIO_LOWPWR 0x1340 +#define S5P_CAM_LOWPWR 0x1380 +#define S5P_TV_LOWPWR 0x1384 +#define S5P_MFC_LOWPWR 0x1388 +#define S5P_G3D_LOWPWR 0x138C +#define S5P_LCD0_LOWPWR 0x1390 +#define S5P_MAUDIO_LOWPWR 0x1398 +#define S5P_GPS_LOWPWR 0x139C +#define S5P_GPS_ALIVE_LOWPWR 0x13A0 + +#define EXYNOS_ARM_CORE0_CONFIGURATION 0x2000 +#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ + (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_ARM_CORE_STATUS(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) +#define EXYNOS_ARM_CORE_OPTION(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8) + +#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500 +#define EXYNOS_COMMON_CONFIGURATION(_nr) \ + (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_COMMON_STATUS(_nr) \ + (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) +#define EXYNOS_COMMON_OPTION(_nr) \ + (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8) + +#define EXYNOS_ARM_L2_CONFIGURATION 0x2600 +#define EXYNOS_L2_CONFIGURATION(_nr) \ + (EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80)) +#define EXYNOS_L2_STATUS(_nr) \ + (EXYNOS_L2_CONFIGURATION(_nr) + 0x4) +#define EXYNOS_L2_OPTION(_nr) \ + (EXYNOS_L2_CONFIGURATION(_nr) + 0x8) + +#define EXYNOS_L2_USE_RETENTION BIT(4) + +#define S5P_PAD_RET_MAUDIO_OPTION 0x3028 +#define S5P_PAD_RET_MMC2_OPTION 0x30c8 +#define S5P_PAD_RET_GPIO_OPTION 0x3108 +#define S5P_PAD_RET_UART_OPTION 0x3128 +#define S5P_PAD_RET_MMCA_OPTION 0x3148 +#define S5P_PAD_RET_MMCB_OPTION 0x3168 +#define S5P_PAD_RET_EBIA_OPTION 0x3188 +#define S5P_PAD_RET_EBIB_OPTION 0x31A8 +#define S5P_PAD_RET_SPI_OPTION 0x31c8 + +#define S5P_PS_HOLD_CONTROL 0x330C +#define S5P_PS_HOLD_EN (1 << 31) +#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8) + +#define S5P_CAM_OPTION 0x3C08 +#define S5P_MFC_OPTION 0x3C48 +#define S5P_G3D_OPTION 0x3C68 +#define S5P_LCD0_OPTION 0x3C88 +#define S5P_LCD1_OPTION 0x3CA8 +#define S5P_ISP_OPTION S5P_LCD1_OPTION + +#define S5P_CORE_LOCAL_PWR_EN 0x3 +#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8) +#define S5P_CORE_AUTOWAKEUP_EN (1 << 31) + +/* Only for S5Pv210 */ +#define S5PV210_EINT_WAKEUP_MASK 0xC004 + +/* Only for Exynos4210 */ +#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154 +#define S5P_CMU_RESET_LCD1_LOWPWR 0x1174 +#define S5P_MODIMIF_MEM_LOWPWR 0x11C4 +#define S5P_PCIE_MEM_LOWPWR 0x11E0 +#define S5P_SATA_MEM_LOWPWR 0x11E4 +#define S5P_LCD1_LOWPWR 0x1394 + +/* Only for Exynos4x12 */ +#define S5P_ISP_ARM_LOWPWR 0x1050 +#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR 0x1054 +#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR 0x1058 +#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR 0x1110 +#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR 0x1114 +#define S5P_CMU_RESET_COREBLK_LOWPWR 0x111C +#define S5P_MPLLUSER_SYSCLK_LOWPWR 0x1130 +#define S5P_CMU_CLKSTOP_ISP_LOWPWR 0x1154 +#define S5P_CMU_RESET_ISP_LOWPWR 0x1174 +#define S5P_TOP_BUS_COREBLK_LOWPWR 0x1190 +#define S5P_TOP_RETENTION_COREBLK_LOWPWR 0x1194 +#define S5P_TOP_PWR_COREBLK_LOWPWR 0x1198 +#define S5P_OSCCLK_GATE_LOWPWR 0x11A4 +#define S5P_LOGIC_RESET_COREBLK_LOWPWR 0x11B0 +#define S5P_OSCCLK_GATE_COREBLK_LOWPWR 0x11B4 +#define S5P_HSI_MEM_LOWPWR 0x11C4 +#define S5P_ROTATOR_MEM_LOWPWR 0x11DC +#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR 0x123C +#define S5P_PAD_ISOLATION_COREBLK_LOWPWR 0x1250 +#define S5P_GPIO_MODE_COREBLK_LOWPWR 0x1320 +#define S5P_TOP_ASB_RESET_LOWPWR 0x1344 +#define S5P_TOP_ASB_ISOLATION_LOWPWR 0x1348 +#define S5P_ISP_LOWPWR 0x1394 +#define S5P_DRAM_FREQ_DOWN_LOWPWR 0x13B0 +#define S5P_DDRPHY_DLLOFF_LOWPWR 0x13B4 +#define S5P_CMU_SYSCLK_ISP_LOWPWR 0x13B8 +#define S5P_CMU_SYSCLK_GPS_LOWPWR 0x13BC +#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR 0x13C0 + +#define S5P_ARM_L2_0_OPTION 0x2608 +#define S5P_ARM_L2_1_OPTION 0x2628 +#define S5P_ONENAND_MEM_OPTION 0x2E08 +#define S5P_HSI_MEM_OPTION 0x2E28 +#define S5P_G2D_ACP_MEM_OPTION 0x2E48 +#define S5P_USBOTG_MEM_OPTION 0x2E68 +#define S5P_HSMMC_MEM_OPTION 0x2E88 +#define S5P_CSSYS_MEM_OPTION 0x2EA8 +#define S5P_SECSS_MEM_OPTION 0x2EC8 +#define S5P_ROTATOR_MEM_OPTION 0x2F48 + +/* Only for Exynos4412 */ +#define S5P_ARM_CORE2_LOWPWR 0x1020 +#define S5P_DIS_IRQ_CORE2 0x1024 +#define S5P_DIS_IRQ_CENTRAL2 0x1028 +#define S5P_ARM_CORE3_LOWPWR 0x1030 +#define S5P_DIS_IRQ_CORE3 0x1034 +#define S5P_DIS_IRQ_CENTRAL3 0x1038 + +/* Only for Exynos3XXX */ +#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000 +#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 +#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 +#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010 +#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 +#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 +#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050 +#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 +#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 +#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080 +#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0 +#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 +#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 +#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C +#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110 +#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114 +#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C +#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120 +#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124 +#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128 +#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C +#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130 +#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134 +#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138 +#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140 +#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148 +#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C +#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150 +#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154 +#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158 +#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160 +#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168 +#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C +#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170 +#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174 +#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178 +#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180 +#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184 +#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188 +#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190 +#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194 +#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198 +#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0 +#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4 +#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0 +#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4 +#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 +#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204 +#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208 +#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218 +#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 +#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 +#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228 +#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C +#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 +#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 +#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238 +#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240 +#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260 +#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280 +#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284 +#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0 +#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4 +#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300 +#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340 +#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344 +#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 +#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350 +#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354 +#define EXYNOS3_CAM_SYS_PWR_REG 0x1380 +#define EXYNOS3_MFC_SYS_PWR_REG 0x1388 +#define EXYNOS3_G3D_SYS_PWR_REG 0x138C +#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390 +#define EXYNOS3_ISP_SYS_PWR_REG 0x1394 +#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398 +#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0 +#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4 +#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8 +#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0 +#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4 +#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8 + +#define EXYNOS3_ARM_CORE0_OPTION 0x2008 +#define EXYNOS3_ARM_CORE_OPTION(_nr) \ + (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80)) + +#define EXYNOS3_ARM_COMMON_OPTION 0x2408 +#define EXYNOS3_ARM_L2_OPTION 0x2608 +#define EXYNOS3_TOP_PWR_OPTION 0x2C48 +#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8 +#define EXYNOS3_XUSBXTI_DURATION 0x341C +#define EXYNOS3_XXTI_DURATION 0x343C +#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C +#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C +#define XUSBXTI_DURATION 0x00000BB8 +#define XXTI_DURATION XUSBXTI_DURATION +#define EXT_REGULATOR_DURATION 0x00001D4C +#define EXT_REGULATOR_COREBLK_DURATION EXT_REGULATOR_DURATION + +/* for XXX_OPTION */ +#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0) +#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1) +#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) + +/* For Exynos5 */ + +#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408 +#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C +#define EXYNOS5_USBDRD_PHY_CONTROL 0x0704 +#define EXYNOS5_DPTX_PHY_CONTROL 0x0720 + +#define EXYNOS5_USE_RETENTION BIT(4) +#define EXYNOS5_SYS_WDTRESET (1 << 20) + +#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000 +#define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004 +#define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008 +#define EXYNOS5_ARM_CORE1_SYS_PWR_REG 0x1010 +#define EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014 +#define EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018 +#define EXYNOS5_FSYS_ARM_SYS_PWR_REG 0x1040 +#define EXYNOS5_DIS_IRQ_FSYS_ARM_CENTRAL_SYS_PWR_REG 0x1048 +#define EXYNOS5_ISP_ARM_SYS_PWR_REG 0x1050 +#define EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054 +#define EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058 +#define EXYNOS5_ARM_COMMON_SYS_PWR_REG 0x1080 +#define EXYNOS5_ARM_L2_SYS_PWR_REG 0x10C0 +#define EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG 0x1100 +#define EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG 0x1104 +#define EXYNOS5_CMU_RESET_SYS_PWR_REG 0x110C +#define EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG 0x1120 +#define EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG 0x1124 +#define EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG 0x112C +#define EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG 0x1130 +#define EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG 0x1134 +#define EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG 0x1138 +#define EXYNOS5_APLL_SYSCLK_SYS_PWR_REG 0x1140 +#define EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG 0x1144 +#define EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG 0x1148 +#define EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG 0x114C +#define EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG 0x1150 +#define EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG 0x1154 +#define EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1164 +#define EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1170 +#define EXYNOS5_TOP_BUS_SYS_PWR_REG 0x1180 +#define EXYNOS5_TOP_RETENTION_SYS_PWR_REG 0x1184 +#define EXYNOS5_TOP_PWR_SYS_PWR_REG 0x1188 +#define EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG 0x1190 +#define EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG 0x1194 +#define EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG 0x1198 +#define EXYNOS5_LOGIC_RESET_SYS_PWR_REG 0x11A0 +#define EXYNOS5_OSCCLK_GATE_SYS_PWR_REG 0x11A4 +#define EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG 0x11B0 +#define EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG 0x11B4 +#define EXYNOS5_USBOTG_MEM_SYS_PWR_REG 0x11C0 +#define EXYNOS5_G2D_MEM_SYS_PWR_REG 0x11C8 +#define EXYNOS5_USBDRD_MEM_SYS_PWR_REG 0x11CC +#define EXYNOS5_SDMMC_MEM_SYS_PWR_REG 0x11D0 +#define EXYNOS5_CSSYS_MEM_SYS_PWR_REG 0x11D4 +#define EXYNOS5_SECSS_MEM_SYS_PWR_REG 0x11D8 +#define EXYNOS5_ROTATOR_MEM_SYS_PWR_REG 0x11DC +#define EXYNOS5_INTRAM_MEM_SYS_PWR_REG 0x11E0 +#define EXYNOS5_INTROM_MEM_SYS_PWR_REG 0x11E4 +#define EXYNOS5_JPEG_MEM_SYS_PWR_REG 0x11E8 +#define EXYNOS5_HSI_MEM_SYS_PWR_REG 0x11EC +#define EXYNOS5_MCUIOP_MEM_SYS_PWR_REG 0x11F4 +#define EXYNOS5_SATA_MEM_SYS_PWR_REG 0x11FC +#define EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200 +#define EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG 0x1204 +#define EXYNOS5_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220 +#define EXYNOS5_PAD_RETENTION_UART_SYS_PWR_REG 0x1224 +#define EXYNOS5_PAD_RETENTION_MMCA_SYS_PWR_REG 0x1228 +#define EXYNOS5_PAD_RETENTION_MMCB_SYS_PWR_REG 0x122C +#define EXYNOS5_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230 +#define EXYNOS5_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234 +#define EXYNOS5_PAD_RETENTION_SPI_SYS_PWR_REG 0x1238 +#define EXYNOS5_PAD_RETENTION_GPIO_SYSMEM_SYS_PWR_REG 0x123C +#define EXYNOS5_PAD_ISOLATION_SYS_PWR_REG 0x1240 +#define EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG 0x1250 +#define EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG 0x1260 +#define EXYNOS5_XUSBXTI_SYS_PWR_REG 0x1280 +#define EXYNOS5_XXTI_SYS_PWR_REG 0x1284 +#define EXYNOS5_EXT_REGULATOR_SYS_PWR_REG 0x12C0 +#define EXYNOS5_GPIO_MODE_SYS_PWR_REG 0x1300 +#define EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG 0x1320 +#define EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG 0x1340 +#define EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG 0x1344 +#define EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348 +#define EXYNOS5_GSCL_SYS_PWR_REG 0x1400 +#define EXYNOS5_ISP_SYS_PWR_REG 0x1404 +#define EXYNOS5_MFC_SYS_PWR_REG 0x1408 +#define EXYNOS5_G3D_SYS_PWR_REG 0x140C +#define EXYNOS5_DISP1_SYS_PWR_REG 0x1414 +#define EXYNOS5_MAU_SYS_PWR_REG 0x1418 +#define EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG 0x1480 +#define EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1484 +#define EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1488 +#define EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x148C +#define EXYNOS5_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1494 +#define EXYNOS5_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1498 +#define EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG 0x14C0 +#define EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG 0x14C4 +#define EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG 0x14C8 +#define EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG 0x14CC +#define EXYNOS5_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D4 +#define EXYNOS5_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D8 +#define EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG 0x1580 +#define EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG 0x1584 +#define EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG 0x1588 +#define EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG 0x158C +#define EXYNOS5_CMU_RESET_DISP1_SYS_PWR_REG 0x1594 +#define EXYNOS5_CMU_RESET_MAU_SYS_PWR_REG 0x1598 + +#define EXYNOS5_ARM_CORE0_OPTION 0x2008 +#define EXYNOS5_ARM_CORE1_OPTION 0x2088 +#define EXYNOS5_FSYS_ARM_OPTION 0x2208 +#define EXYNOS5_ISP_ARM_OPTION 0x2288 +#define EXYNOS5_ARM_COMMON_OPTION 0x2408 +#define EXYNOS5_ARM_L2_OPTION 0x2608 +#define EXYNOS5_TOP_PWR_OPTION 0x2C48 +#define EXYNOS5_TOP_PWR_SYSMEM_OPTION 0x2CC8 +#define EXYNOS5_JPEG_MEM_OPTION 0x2F48 +#define EXYNOS5_GSCL_OPTION 0x4008 +#define EXYNOS5_ISP_OPTION 0x4028 +#define EXYNOS5_MFC_OPTION 0x4048 +#define EXYNOS5_G3D_OPTION 0x4068 +#define EXYNOS5_DISP1_OPTION 0x40A8 +#define EXYNOS5_MAU_OPTION 0x40C8 + +#define EXYNOS5_USE_SC_FEEDBACK (1 << 1) +#define EXYNOS5_USE_SC_COUNTER (1 << 0) + +#define EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7) + +#define EXYNOS5_OPTION_USE_STANDBYWFE (1 << 24) +#define EXYNOS5_OPTION_USE_STANDBYWFI (1 << 16) + +#define EXYNOS5_OPTION_USE_RETENTION (1 << 4) + +#define EXYNOS5420_SWRESET_KFC_SEL 0x3 + +/* Only for Exynos5420 */ +#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3) + +#define EXYNOS5420_LPI_MASK 0x0004 +#define EXYNOS5420_LPI_MASK1 0x0008 +#define EXYNOS5420_UFS BIT(8) +#define EXYNOS5420_ATB_KFC BIT(13) +#define EXYNOS5420_ATB_ISP_ARM BIT(19) +#define EXYNOS5420_EMULATION BIT(31) + +#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE 0x0100 +#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI 0x0104 +#define EXYNOS5420_UP_SCHEDULER 0x0120 +#define SPREAD_ENABLE 0xF +#define SPREAD_USE_STANDWFI 0xF + +#define EXYNOS5420_KFC_CORE_RESET0 BIT(8) +#define EXYNOS5420_KFC_ETM_RESET0 BIT(20) + +#define EXYNOS5420_KFC_CORE_RESET(_nr) \ + ((EXYNOS5420_KFC_CORE_RESET0 | EXYNOS5420_KFC_ETM_RESET0) << (_nr)) + +#define EXYNOS5420_USBDRD1_PHY_CONTROL 0x0708 +#define EXYNOS5420_MIPI_PHY_CONTROL(n) (0x0714 + (n) * 4) +#define EXYNOS5420_DPTX_PHY_CONTROL 0x0728 +#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020 +#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024 +#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028 +#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG 0x1030 +#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG 0x1034 +#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG 0x1038 +#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG 0x1040 +#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG 0x1044 +#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG 0x1048 +#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG 0x1050 +#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG 0x1054 +#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG 0x1058 +#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG 0x1060 +#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG 0x1064 +#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG 0x1068 +#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG 0x1070 +#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG 0x1074 +#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG 0x1078 +#define EXYNOS5420_ISP_ARM_SYS_PWR_REG 0x1090 +#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1094 +#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1098 +#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG 0x10A0 +#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG 0x10B0 +#define EXYNOS5420_KFC_L2_SYS_PWR_REG 0x10D0 +#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG 0x1158 +#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG 0x115C +#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG 0x1160 +#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG 0x1174 +#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG 0x1178 +#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG 0x11B8 +#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG 0x11BC +#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1208 +#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1210 +#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG 0x1214 +#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1218 +#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG 0x121C +#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1220 +#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG 0x1224 +#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1228 +#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG 0x122C +#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG 0x1230 +#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG 0x1234 +#define EXYNOS5420_DISP1_SYS_PWR_REG 0x1410 +#define EXYNOS5420_MAU_SYS_PWR_REG 0x1414 +#define EXYNOS5420_G2D_SYS_PWR_REG 0x1418 +#define EXYNOS5420_MSC_SYS_PWR_REG 0x141C +#define EXYNOS5420_FSYS_SYS_PWR_REG 0x1420 +#define EXYNOS5420_FSYS2_SYS_PWR_REG 0x1424 +#define EXYNOS5420_PSGEN_SYS_PWR_REG 0x1428 +#define EXYNOS5420_PERIC_SYS_PWR_REG 0x142C +#define EXYNOS5420_WCORE_SYS_PWR_REG 0x1430 +#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1490 +#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1494 +#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG 0x1498 +#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG 0x149C +#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG 0x14A0 +#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG 0x14A4 +#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG 0x14A8 +#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG 0x14AC +#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG 0x14B0 +#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG 0x14BC +#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D0 +#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D4 +#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG 0x14D8 +#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG 0x14DC +#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG 0x14E0 +#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG 0x14E4 +#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG 0x14E8 +#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG 0x14EC +#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG 0x14F0 +#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG 0x14F4 +#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG 0x1570 +#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG 0x1574 +#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG 0x1578 +#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG 0x157C +#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG 0x1590 +#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG 0x1594 +#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG 0x1598 +#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG 0x159C +#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG 0x15A0 +#define EXYNOS5420_SFR_AXI_CGDIS1 0x15E4 +#define EXYNOS5420_ARM_COMMON_OPTION 0x2508 +#define EXYNOS5420_KFC_COMMON_OPTION 0x2588 +#define EXYNOS5420_LOGIC_RESET_DURATION3 0x2D1C + +#define EXYNOS5420_PAD_RET_GPIO_OPTION 0x30C8 +#define EXYNOS5420_PAD_RET_UART_OPTION 0x30E8 +#define EXYNOS5420_PAD_RET_MMCA_OPTION 0x3108 +#define EXYNOS5420_PAD_RET_MMCB_OPTION 0x3128 +#define EXYNOS5420_PAD_RET_MMCC_OPTION 0x3148 +#define EXYNOS5420_PAD_RET_HSI_OPTION 0x3168 +#define EXYNOS5420_PAD_RET_SPI_OPTION 0x31C8 +#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION 0x31E8 +#define EXYNOS_PAD_RET_DRAM_OPTION 0x3008 +#define EXYNOS_PAD_RET_MAUDIO_OPTION 0x3028 +#define EXYNOS_PAD_RET_JTAG_OPTION 0x3048 +#define EXYNOS_PAD_RET_EBIA_OPTION 0x3188 +#define EXYNOS_PAD_RET_EBIB_OPTION 0x31A8 + +#define EXYNOS5420_FSYS2_OPTION 0x4168 +#define EXYNOS5420_PSGEN_OPTION 0x4188 + +#define EXYNOS5420_ARM_USE_STANDBY_WFI0 BIT(4) +#define EXYNOS5420_ARM_USE_STANDBY_WFI1 BIT(5) +#define EXYNOS5420_ARM_USE_STANDBY_WFI2 BIT(6) +#define EXYNOS5420_ARM_USE_STANDBY_WFI3 BIT(7) +#define EXYNOS5420_KFC_USE_STANDBY_WFI0 BIT(8) +#define EXYNOS5420_KFC_USE_STANDBY_WFI1 BIT(9) +#define EXYNOS5420_KFC_USE_STANDBY_WFI2 BIT(10) +#define EXYNOS5420_KFC_USE_STANDBY_WFI3 BIT(11) +#define EXYNOS5420_ARM_USE_STANDBY_WFE0 BIT(16) +#define EXYNOS5420_ARM_USE_STANDBY_WFE1 BIT(17) +#define EXYNOS5420_ARM_USE_STANDBY_WFE2 BIT(18) +#define EXYNOS5420_ARM_USE_STANDBY_WFE3 BIT(19) +#define EXYNOS5420_KFC_USE_STANDBY_WFE0 BIT(20) +#define EXYNOS5420_KFC_USE_STANDBY_WFE1 BIT(21) +#define EXYNOS5420_KFC_USE_STANDBY_WFE2 BIT(22) +#define EXYNOS5420_KFC_USE_STANDBY_WFE3 BIT(23) + +#define DUR_WAIT_RESET 0xF + +#define EXYNOS5420_USE_STANDBY_WFI_ALL (EXYNOS5420_ARM_USE_STANDBY_WFI0 \ + | EXYNOS5420_ARM_USE_STANDBY_WFI1 \ + | EXYNOS5420_ARM_USE_STANDBY_WFI2 \ + | EXYNOS5420_ARM_USE_STANDBY_WFI3 \ + | EXYNOS5420_KFC_USE_STANDBY_WFI0 \ + | EXYNOS5420_KFC_USE_STANDBY_WFI1 \ + | EXYNOS5420_KFC_USE_STANDBY_WFI2 \ + | EXYNOS5420_KFC_USE_STANDBY_WFI3) + +/* For Exynos5433 */ +#define EXYNOS5433_EINT_WAKEUP_MASK (0x060C) +#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x0728) +#define EXYNOS5433_PAD_RETENTION_AUD_OPTION (0x3028) +#define EXYNOS5433_PAD_RETENTION_MMC2_OPTION (0x30C8) +#define EXYNOS5433_PAD_RETENTION_TOP_OPTION (0x3108) +#define EXYNOS5433_PAD_RETENTION_UART_OPTION (0x3128) +#define EXYNOS5433_PAD_RETENTION_MMC0_OPTION (0x3148) +#define EXYNOS5433_PAD_RETENTION_MMC1_OPTION (0x3168) +#define EXYNOS5433_PAD_RETENTION_EBIA_OPTION (0x3188) +#define EXYNOS5433_PAD_RETENTION_EBIB_OPTION (0x31A8) +#define EXYNOS5433_PAD_RETENTION_SPI_OPTION (0x31C8) +#define EXYNOS5433_PAD_RETENTION_MIF_OPTION (0x31E8) +#define EXYNOS5433_PAD_RETENTION_USBXTI_OPTION (0x3228) +#define EXYNOS5433_PAD_RETENTION_BOOTLDO_OPTION (0x3248) +#define EXYNOS5433_PAD_RETENTION_UFS_OPTION (0x3268) +#define EXYNOS5433_PAD_RETENTION_FSYSGENIO_OPTION (0x32A8) + +#endif /* __LINUX_SOC_EXYNOS_REGS_PMU_H */ diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h new file mode 100644 index 000000000..591c94ef9 --- /dev/null +++ b/include/linux/soc/samsung/s3c-adc.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C ADC driver information + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H +#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__ + +struct s3c_adc_client; +struct platform_device; + +extern int s3c_adc_start(struct s3c_adc_client *client, + unsigned int channel, unsigned int nr_samples); + +extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); + +extern struct s3c_adc_client * + s3c_adc_register(struct platform_device *pdev, + void (*select)(struct s3c_adc_client *client, + unsigned selected), + void (*conv)(struct s3c_adc_client *client, + unsigned d0, unsigned d1, + unsigned *samples_left), + unsigned int is_ts); + +extern void s3c_adc_release(struct s3c_adc_client *client); + +#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */ diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h new file mode 100644 index 000000000..63e88fd5d --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpu-freq.h @@ -0,0 +1,145 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - driver and board + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H +#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H + +#include <linux/cpufreq.h> + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +/** + * struct s3c_freq - frequency information (mainly for core drivers) + * @fclk: The FCLK frequency in Hz. + * @armclk: The ARMCLK frequency in Hz. + * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. + * @hclk: The HCLK frequency in Hz. + * @pclk: The PCLK frequency in Hz. + * + * This contains the frequency information about the current configuration + * mainly for the core drivers to ensure we do not end up passing about + * a large number of parameters. + * + * The @hclk_tns field is a useful cache for the parts of the drivers that + * need to calculate IO timings and suchlike. + */ +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/** + * struct s3c_cpufreq_freqs - s3c cpufreq notification information. + * @freqs: The cpufreq setting information. + * @old: The old clock settings. + * @new: The new clock settings. + * @pll_changing: Set if the PLL is changing. + * + * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + * + * The pll_changing flag is used to indicate if the PLL itself is + * being set during this change. This is important as the clocks + * will temporarily be set to the XTAL clock during this time, so + * drivers may want to close down their output during this time. + * + * Note, this is not being used by any current drivers and therefore + * may be removed in the future. + */ +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; + + unsigned int pll_changing:1; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +/** + * struct s3c_clkdivs - clock divisor information + * @p_divisor: Divisor from FCLK to PCLK. + * @h_divisor: Divisor from FCLK to HCLK. + * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). + * @dvs: Non-zero if using DVS mode for ARMCLK. + * + * Divisor settings for the core clocks. + */ +struct s3c_clkdivs { + int p_divisor; + int h_divisor; + int arm_divisor; + unsigned char dvs; +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +/** + * struct s3c_pllval - PLL value entry. + * @freq: The frequency for this entry in Hz. + * @pll_reg: The PLL register setting for this PLL value. + */ +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +/** + * struct s3c_cpufreq_board - per-board cpu frequency informatin + * @refresh: The SDRAM refresh period in nanoseconds. + * @auto_io: Set if the IO timing settings should be generated from the + * initialisation time hardware registers. + * @need_io: Set if the board has external IO on any of the chipselect + * lines that will require the hardware timing registers to be + * updated on a clock change. + * @max: The maxium frequency limits for the system. Any field that + * is left at zero will use the CPU's settings. + * + * This contains the board specific settings that affect how the CPU + * drivers chose settings. These include the memory refresh and IO + * timing information. + * + * Registration depends on the driver being used, the ARMCLK only + * implementation does not currently need this but the older style + * driver requires this to be available. + */ +struct s3c_cpufreq_board { + unsigned int refresh; + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_ARM_S3C_CPUFREQ +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_ARM_S3C_CPUFREQ +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_ARM_S3C_CPUFREQ */ + +#endif diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h new file mode 100644 index 000000000..3b278afb7 --- /dev/null +++ b/include/linux/soc/samsung/s3c-cpufreq-core.h @@ -0,0 +1,299 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2006-2009 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - core support + */ +#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H +#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H + +#include <linux/soc/samsung/s3c-cpu-freq.h> + +struct seq_file; + +#define MAX_BANKS (8) +#define S3C2412_MAX_IO (8) + +/** + * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings + * @bankcon: The cached version of settings in this structure. + * @tacp: + * @tacs: Time from address valid to nCS asserted. + * @tcos: Time from nCS asserted to nOE or nWE asserted. + * @tacc: Time that nOE or nWE is asserted. + * @tcoh: Time nCS is held after nOE or nWE are released. + * @tcah: Time address is held for after + * @nwait_en: Whether nWAIT is enabled for this bank. + * + * This structure represents the IO timings for a S3C2410 style IO bank + * used by the CPU frequency support if it needs to change the settings + * of the IO. + */ +struct s3c2410_iobank_timing { + unsigned long bankcon; + unsigned int tacp; + unsigned int tacs; + unsigned int tcos; + unsigned int tacc; + unsigned int tcoh; /* nCS hold after nOE/nWE */ + unsigned int tcah; /* Address hold after nCS */ + unsigned char nwait_en; /* nWait enabled for bank. */ +}; + +/** + * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO + * @idcy: The idle cycle time between transactions. + * @wstrd: nCS release to end of read cycle. + * @wstwr: nCS release to end of write cycle. + * @wstoen: nCS assertion to nOE assertion time. + * @wstwen: nCS assertion to nWE assertion time. + * @wstbrd: Burst ready delay. + * @smbidcyr: Register cache for smbidcyr value. + * @smbwstrd: Register cache for smbwstrd value. + * @smbwstwr: Register cache for smbwstwr value. + * @smbwstoen: Register cache for smbwstoen value. + * @smbwstwen: Register cache for smbwstwen value. + * @smbwstbrd: Register cache for smbwstbrd value. + * + * Timing information for a IO bank on an S3C2412 or similar system which + * uses a PL093 block. + */ +struct s3c2412_iobank_timing { + unsigned int idcy; + unsigned int wstrd; + unsigned int wstwr; + unsigned int wstoen; + unsigned int wstwen; + unsigned int wstbrd; + + /* register cache */ + unsigned char smbidcyr; + unsigned char smbwstrd; + unsigned char smbwstwr; + unsigned char smbwstoen; + unsigned char smbwstwen; + unsigned char smbwstbrd; +}; + +union s3c_iobank { + struct s3c2410_iobank_timing *io_2410; + struct s3c2412_iobank_timing *io_2412; +}; + +/** + * struct s3c_iotimings - Chip IO timings holder + * @bank: The timings for each IO bank. + */ +struct s3c_iotimings { + union s3c_iobank bank[MAX_BANKS]; +}; + +/** + * struct s3c_plltab - PLL table information. + * @vals: List of PLL values. + * @size: Size of the PLL table @vals. + */ +struct s3c_plltab { + struct s3c_pllval *vals; + int size; +}; + +/** + * struct s3c_cpufreq_config - current cpu frequency configuration + * @freq: The current settings for the core clocks. + * @max: Maxium settings, derived from core, board and user settings. + * @pll: The PLL table entry for the current PLL settings. + * @divs: The divisor settings for the core clocks. + * @info: The current core driver information. + * @board: The information for the board we are running on. + * @lock_pll: Set if the PLL settings cannot be changed. + * + * This is for the core drivers that need to know information about + * the current settings and values. It should not be needed by any + * device drivers. +*/ +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_freq max; + struct clk *mpll; + struct cpufreq_frequency_table pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; + + unsigned int lock_pll:1; +}; + +/** + * struct s3c_cpufreq_info - Information for the CPU frequency driver. + * @name: The name of this implementation. + * @max: The maximum frequencies for the system. + * @latency: Transition latency to give to cpufreq. + * @locktime_m: The lock-time in uS for the MPLL. + * @locktime_u: The lock-time in uS for the UPLL. + * @locttime_bits: The number of bits each LOCKTIME field. + * @need_pll: Set if this driver needs to change the PLL values to achieve + * any frequency changes. This is really only need by devices like the + * S3C2410 where there is no or limited divider between the PLL and the + * ARMCLK. + * @get_iotiming: Get the current IO timing data, mainly for use at start. + * @set_iotiming: Update the IO timings from the cached copies calculated + * from the @calc_iotiming entry when changing the frequency. + * @calc_iotiming: Calculate and update the cached copies of the IO timings + * from the newly calculated frequencies. + * @calc_freqtable: Calculate (fill in) the given frequency table from the + * current frequency configuration. If the table passed in is NULL, + * then the return is the number of elements to be filled for allocation + * of the table. + * @set_refresh: Set the memory refresh configuration. + * @set_fvco: Set the PLL frequencies. + * @set_divs: Update the clock divisors. + * @calc_divs: Calculate the clock divisors. + */ +struct s3c_cpufreq_info { + const char *name; + struct s3c_freq max; + + unsigned int latency; + + unsigned int locktime_m; + unsigned int locktime_u; + unsigned char locktime_bits; + + unsigned int need_pll:1; + + /* driver routines */ + + int (*get_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + void (*set_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + + int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, + struct cpufreq_frequency_table *t, + size_t table_size); + + void (*debug_io_show)(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + + void (*set_refresh)(struct s3c_cpufreq_config *cfg); + void (*set_fvco)(struct s3c_cpufreq_config *cfg); + void (*set_divs)(struct s3c_cpufreq_config *cfg); + int (*calc_divs)(struct s3c_cpufreq_config *cfg); +}; + +extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); + +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); + +/* exports and utilities for debugfs */ +extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); +extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS +#define s3c_cpufreq_debugfs_call(x) x +#else +#define s3c_cpufreq_debugfs_call(x) NULL +#endif + +/* Useful utility functions. */ + +extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); + +/* S3C2410 and compatible exported functions */ + +extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); + +#ifdef CONFIG_S3C2410_IOTIMING +extern void s3c2410_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +#else +#define s3c2410_iotiming_debugfs NULL +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ + +/* S3C2412 compatible routines */ + +#ifdef CONFIG_S3C2412_IOTIMING +extern void s3c2412_iotiming_debugfs(struct seq_file *seq, + struct s3c_cpufreq_config *cfg, + union s3c_iobank *iob); + +extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *timings); + +extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); + +extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, + struct s3c_iotimings *iot); +extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +#else +#define s3c2412_iotiming_debugfs NULL +#define s3c2412_iotiming_calc NULL +#define s3c2412_iotiming_get NULL +#define s3c2412_iotiming_set NULL +#endif /* CONFIG_S3C2412_IOTIMING */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG +#define s3c_freq_dbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ + +#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG +#define s3c_freq_iodbg(x...) printk(KERN_INFO x) +#else +#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) +#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ + +static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, + int index, size_t table_size, + unsigned int freq) +{ + if (index < 0) + return index; + + if (table) { + if (index >= table_size) + return -ENOMEM; + + s3c_freq_dbg("%s: { %d = %u kHz }\n", + __func__, index, freq); + + table[index].driver_data = index; + table[index].frequency = freq; + } + + return index + 1; +} + +u32 s3c2440_read_camdivn(void); +void s3c2440_write_camdivn(u32 camdiv); +u32 s3c24xx_read_clkdivn(void); +void s3c24xx_write_clkdivn(u32 clkdiv); +u32 s3c24xx_read_mpllcon(void); +void s3c24xx_write_locktime(u32 locktime); + +#endif diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h new file mode 100644 index 000000000..f9164559c --- /dev/null +++ b/include/linux/soc/samsung/s3c-pm.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Tomasz Figa <t.figa@samsung.com> + * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Written by Ben Dooks, <ben@simtec.co.uk> + */ + +#ifndef __LINUX_SOC_SAMSUNG_S3C_PM_H +#define __LINUX_SOC_SAMSUNG_S3C_PM_H __FILE__ + +#include <linux/types.h> + +/* PM debug functions */ + +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; + u32 udivslot; +}; + +#ifdef CONFIG_SAMSUNG_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) + +extern void s3c_pm_save_uarts(bool is_s3c24xx); +extern void s3c_pm_restore_uarts(bool is_s3c24xx); + +#ifdef CONFIG_ARCH_S3C64XX +extern void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save); +#else +static inline void +s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) +{ +} +#endif + +#else +#define S3C_PMDBG(fmt...) pr_debug(fmt) + +static inline void s3c_pm_save_uarts(bool is_s3c24xx) { } +static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { } +#endif + +/* suspend memory checking */ + +#ifdef CONFIG_SAMSUNG_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while (0) +#define s3c_pm_check_restore() do { } while (0) +#define s3c_pm_check_cleanup() do { } while (0) +#define s3c_pm_check_store() do { } while (0) +#endif + +/* system device subsystems */ + +extern struct bus_type s3c2410_subsys; +extern struct bus_type s3c2410a_subsys; +extern struct bus_type s3c2412_subsys; +extern struct bus_type s3c2416_subsys; +extern struct bus_type s3c2440_subsys; +extern struct bus_type s3c2442_subsys; +extern struct bus_type s3c2443_subsys; + +#endif diff --git a/include/linux/soc/sunxi/sunxi_sram.h b/include/linux/soc/sunxi/sunxi_sram.h new file mode 100644 index 000000000..60e274d1b --- /dev/null +++ b/include/linux/soc/sunxi/sunxi_sram.h @@ -0,0 +1,19 @@ +/* + * Allwinner SoCs SRAM Controller Driver + * + * Copyright (C) 2015 Maxime Ripard + * + * Author: Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _SUNXI_SRAM_H_ +#define _SUNXI_SRAM_H_ + +int sunxi_sram_claim(struct device *dev); +void sunxi_sram_release(struct device *dev); + +#endif /* _SUNXI_SRAM_H_ */ diff --git a/include/linux/soc/ti/k3-ringacc.h b/include/linux/soc/ti/k3-ringacc.h new file mode 100644 index 000000000..39b022b92 --- /dev/null +++ b/include/linux/soc/ti/k3-ringacc.h @@ -0,0 +1,270 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * K3 Ring Accelerator (RA) subsystem interface + * + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com + */ + +#ifndef __SOC_TI_K3_RINGACC_API_H_ +#define __SOC_TI_K3_RINGACC_API_H_ + +#include <linux/types.h> + +struct device_node; + +/** + * enum k3_ring_mode - &struct k3_ring_cfg mode + * + * RA ring operational modes + * + * @K3_RINGACC_RING_MODE_RING: Exposed Ring mode for SW direct access + * @K3_RINGACC_RING_MODE_MESSAGE: Messaging mode. Messaging mode requires + * that all accesses to the queue must go through this IP so that all + * accesses to the memory are controlled and ordered. This IP then + * controls the entire state of the queue, and SW has no directly control, + * such as through doorbells and cannot access the storage memory directly. + * This is particularly useful when more than one SW or HW entity can be + * the producer and/or consumer at the same time + * @K3_RINGACC_RING_MODE_CREDENTIALS: Credentials mode is message mode plus + * stores credentials with each message, requiring the element size to be + * doubled to fit the credentials. Any exposed memory should be protected + * by a firewall from unwanted access + */ +enum k3_ring_mode { + K3_RINGACC_RING_MODE_RING = 0, + K3_RINGACC_RING_MODE_MESSAGE, + K3_RINGACC_RING_MODE_CREDENTIALS, + K3_RINGACC_RING_MODE_INVALID +}; + +/** + * enum k3_ring_size - &struct k3_ring_cfg elm_size + * + * RA ring element's sizes in bytes. + */ +enum k3_ring_size { + K3_RINGACC_RING_ELSIZE_4 = 0, + K3_RINGACC_RING_ELSIZE_8, + K3_RINGACC_RING_ELSIZE_16, + K3_RINGACC_RING_ELSIZE_32, + K3_RINGACC_RING_ELSIZE_64, + K3_RINGACC_RING_ELSIZE_128, + K3_RINGACC_RING_ELSIZE_256, + K3_RINGACC_RING_ELSIZE_INVALID +}; + +struct k3_ringacc; +struct k3_ring; + +/** + * enum k3_ring_cfg - RA ring configuration structure + * + * @size: Ring size, number of elements + * @elm_size: Ring element size + * @mode: Ring operational mode + * @flags: Ring configuration flags. Possible values: + * @K3_RINGACC_RING_SHARED: when set allows to request the same ring + * few times. It's usable when the same ring is used as Free Host PD ring + * for different flows, for example. + * Note: Locking should be done by consumer if required + * @dma_dev: Master device which is using and accessing to the ring + * memory when the mode is K3_RINGACC_RING_MODE_RING. Memory allocations + * should be done using this device. + * @asel: Address Space Select value for physical addresses + */ +struct k3_ring_cfg { + u32 size; + enum k3_ring_size elm_size; + enum k3_ring_mode mode; +#define K3_RINGACC_RING_SHARED BIT(1) + u32 flags; + + struct device *dma_dev; + u32 asel; +}; + +#define K3_RINGACC_RING_ID_ANY (-1) + +/** + * of_k3_ringacc_get_by_phandle - find a RA by phandle property + * @np: device node + * @propname: property name containing phandle on RA node + * + * Returns pointer on the RA - struct k3_ringacc + * or -ENODEV if not found, + * or -EPROBE_DEFER if not yet registered + */ +struct k3_ringacc *of_k3_ringacc_get_by_phandle(struct device_node *np, + const char *property); + +#define K3_RINGACC_RING_USE_PROXY BIT(1) + +/** + * k3_ringacc_request_ring - request ring from ringacc + * @ringacc: pointer on ringacc + * @id: ring id or K3_RINGACC_RING_ID_ANY for any general purpose ring + * @flags: + * @K3_RINGACC_RING_USE_PROXY: if set - proxy will be allocated and + * used to access ring memory. Sopported only for rings in + * Message/Credentials/Queue mode. + * + * Returns pointer on the Ring - struct k3_ring + * or NULL in case of failure. + */ +struct k3_ring *k3_ringacc_request_ring(struct k3_ringacc *ringacc, + int id, u32 flags); + +int k3_ringacc_request_rings_pair(struct k3_ringacc *ringacc, + int fwd_id, int compl_id, + struct k3_ring **fwd_ring, + struct k3_ring **compl_ring); +/** + * k3_ringacc_ring_reset - ring reset + * @ring: pointer on Ring + * + * Resets ring internal state ((hw)occ, (hw)idx). + */ +void k3_ringacc_ring_reset(struct k3_ring *ring); +/** + * k3_ringacc_ring_reset - ring reset for DMA rings + * @ring: pointer on Ring + * + * Resets ring internal state ((hw)occ, (hw)idx). Should be used for rings + * which are read by K3 UDMA, like TX or Free Host PD rings. + */ +void k3_ringacc_ring_reset_dma(struct k3_ring *ring, u32 occ); + +/** + * k3_ringacc_ring_free - ring free + * @ring: pointer on Ring + * + * Resets ring and free all alocated resources. + */ +int k3_ringacc_ring_free(struct k3_ring *ring); + +/** + * k3_ringacc_get_ring_id - Get the Ring ID + * @ring: pointer on ring + * + * Returns the Ring ID + */ +u32 k3_ringacc_get_ring_id(struct k3_ring *ring); + +/** + * k3_ringacc_get_ring_irq_num - Get the irq number for the ring + * @ring: pointer on ring + * + * Returns the interrupt number which can be used to request the interrupt + */ +int k3_ringacc_get_ring_irq_num(struct k3_ring *ring); + +/** + * k3_ringacc_ring_cfg - ring configure + * @ring: pointer on ring + * @cfg: Ring configuration parameters (see &struct k3_ring_cfg) + * + * Configures ring, including ring memory allocation. + * Returns 0 on success, errno otherwise. + */ +int k3_ringacc_ring_cfg(struct k3_ring *ring, struct k3_ring_cfg *cfg); + +/** + * k3_ringacc_ring_get_size - get ring size + * @ring: pointer on ring + * + * Returns ring size in number of elements. + */ +u32 k3_ringacc_ring_get_size(struct k3_ring *ring); + +/** + * k3_ringacc_ring_get_free - get free elements + * @ring: pointer on ring + * + * Returns number of free elements in the ring. + */ +u32 k3_ringacc_ring_get_free(struct k3_ring *ring); + +/** + * k3_ringacc_ring_get_occ - get ring occupancy + * @ring: pointer on ring + * + * Returns total number of valid entries on the ring + */ +u32 k3_ringacc_ring_get_occ(struct k3_ring *ring); + +/** + * k3_ringacc_ring_is_full - checks if ring is full + * @ring: pointer on ring + * + * Returns true if the ring is full + */ +u32 k3_ringacc_ring_is_full(struct k3_ring *ring); + +/** + * k3_ringacc_ring_push - push element to the ring tail + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element to the ring tail. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + */ +int k3_ringacc_ring_push(struct k3_ring *ring, void *elem); + +/** + * k3_ringacc_ring_pop - pop element from the ring head + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element from the ring head. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size.. + * + * Returns 0 on success, errno otherwise. + */ +int k3_ringacc_ring_pop(struct k3_ring *ring, void *elem); + +/** + * k3_ringacc_ring_push_head - push element to the ring head + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element to the ring head. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + * Not Supported by ring modes: K3_RINGACC_RING_MODE_RING + */ +int k3_ringacc_ring_push_head(struct k3_ring *ring, void *elem); + +/** + * k3_ringacc_ring_pop_tail - pop element from the ring tail + * @ring: pointer on ring + * @elem: pointer on ring element buffer + * + * Push one ring element from the ring tail. Size of the ring element is + * determined by ring configuration &struct k3_ring_cfg elm_size. + * + * Returns 0 on success, errno otherwise. + * Not Supported by ring modes: K3_RINGACC_RING_MODE_RING + */ +int k3_ringacc_ring_pop_tail(struct k3_ring *ring, void *elem); + +u32 k3_ringacc_get_tisci_dev_id(struct k3_ring *ring); + +/* DMA ring support */ +struct ti_sci_handle; + +/** + * struct struct k3_ringacc_init_data - Initialization data for DMA rings + */ +struct k3_ringacc_init_data { + const struct ti_sci_handle *tisci; + u32 tisci_dev_id; + u32 num_rings; +}; + +struct k3_ringacc *k3_ringacc_dmarings_init(struct platform_device *pdev, + struct k3_ringacc_init_data *data); + +#endif /* __SOC_TI_K3_RINGACC_API_H_ */ diff --git a/include/linux/soc/ti/knav_dma.h b/include/linux/soc/ti/knav_dma.h new file mode 100644 index 000000000..18d806a8e --- /dev/null +++ b/include/linux/soc/ti/knav_dma.h @@ -0,0 +1,185 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014 Texas Instruments Incorporated + * Authors: Sandeep Nair <sandeep_n@ti.com + * Cyril Chemparathy <cyril@ti.com + Santosh Shilimkar <santosh.shilimkar@ti.com> + */ + +#ifndef __SOC_TI_KEYSTONE_NAVIGATOR_DMA_H__ +#define __SOC_TI_KEYSTONE_NAVIGATOR_DMA_H__ + +#include <linux/dmaengine.h> + +/* + * PKTDMA descriptor manipulation macros for host packet descriptor + */ +#define MASK(x) (BIT(x) - 1) +#define KNAV_DMA_DESC_PKT_LEN_MASK MASK(22) +#define KNAV_DMA_DESC_PKT_LEN_SHIFT 0 +#define KNAV_DMA_DESC_PS_INFO_IN_SOP BIT(22) +#define KNAV_DMA_DESC_PS_INFO_IN_DESC 0 +#define KNAV_DMA_DESC_TAG_MASK MASK(8) +#define KNAV_DMA_DESC_SAG_HI_SHIFT 24 +#define KNAV_DMA_DESC_STAG_LO_SHIFT 16 +#define KNAV_DMA_DESC_DTAG_HI_SHIFT 8 +#define KNAV_DMA_DESC_DTAG_LO_SHIFT 0 +#define KNAV_DMA_DESC_HAS_EPIB BIT(31) +#define KNAV_DMA_DESC_NO_EPIB 0 +#define KNAV_DMA_DESC_PSLEN_SHIFT 24 +#define KNAV_DMA_DESC_PSLEN_MASK MASK(6) +#define KNAV_DMA_DESC_ERR_FLAG_SHIFT 20 +#define KNAV_DMA_DESC_ERR_FLAG_MASK MASK(4) +#define KNAV_DMA_DESC_PSFLAG_SHIFT 16 +#define KNAV_DMA_DESC_PSFLAG_MASK MASK(4) +#define KNAV_DMA_DESC_RETQ_SHIFT 0 +#define KNAV_DMA_DESC_RETQ_MASK MASK(14) +#define KNAV_DMA_DESC_BUF_LEN_MASK MASK(22) +#define KNAV_DMA_DESC_EFLAGS_MASK MASK(4) +#define KNAV_DMA_DESC_EFLAGS_SHIFT 20 + +#define KNAV_DMA_NUM_EPIB_WORDS 4 +#define KNAV_DMA_NUM_PS_WORDS 16 +#define KNAV_DMA_NUM_SW_DATA_WORDS 4 +#define KNAV_DMA_FDQ_PER_CHAN 4 + +/* Tx channel scheduling priority */ +enum knav_dma_tx_priority { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MED_H, + DMA_PRIO_MED_L, + DMA_PRIO_LOW +}; + +/* Rx channel error handling mode during buffer starvation */ +enum knav_dma_rx_err_mode { + DMA_DROP = 0, + DMA_RETRY +}; + +/* Rx flow size threshold configuration */ +enum knav_dma_rx_thresholds { + DMA_THRESH_NONE = 0, + DMA_THRESH_0 = 1, + DMA_THRESH_0_1 = 3, + DMA_THRESH_0_1_2 = 7 +}; + +/* Descriptor type */ +enum knav_dma_desc_type { + DMA_DESC_HOST = 0, + DMA_DESC_MONOLITHIC = 2 +}; + +/** + * struct knav_dma_tx_cfg: Tx channel configuration + * @filt_einfo: Filter extended packet info + * @filt_pswords: Filter PS words present + * @knav_dma_tx_priority: Tx channel scheduling priority + */ +struct knav_dma_tx_cfg { + bool filt_einfo; + bool filt_pswords; + enum knav_dma_tx_priority priority; +}; + +/** + * struct knav_dma_rx_cfg: Rx flow configuration + * @einfo_present: Extended packet info present + * @psinfo_present: PS words present + * @knav_dma_rx_err_mode: Error during buffer starvation + * @knav_dma_desc_type: Host or Monolithic desc + * @psinfo_at_sop: PS word located at start of packet + * @sop_offset: Start of packet offset + * @dst_q: Destination queue for a given flow + * @thresh: Rx flow size threshold + * @fdq[]: Free desc Queue array + * @sz_thresh0: RX packet size threshold 0 + * @sz_thresh1: RX packet size threshold 1 + * @sz_thresh2: RX packet size threshold 2 + */ +struct knav_dma_rx_cfg { + bool einfo_present; + bool psinfo_present; + enum knav_dma_rx_err_mode err_mode; + enum knav_dma_desc_type desc_type; + bool psinfo_at_sop; + unsigned int sop_offset; + unsigned int dst_q; + enum knav_dma_rx_thresholds thresh; + unsigned int fdq[KNAV_DMA_FDQ_PER_CHAN]; + unsigned int sz_thresh0; + unsigned int sz_thresh1; + unsigned int sz_thresh2; +}; + +/** + * struct knav_dma_cfg: Pktdma channel configuration + * @sl_cfg: Slave configuration + * @tx: Tx channel configuration + * @rx: Rx flow configuration + */ +struct knav_dma_cfg { + enum dma_transfer_direction direction; + union { + struct knav_dma_tx_cfg tx; + struct knav_dma_rx_cfg rx; + } u; +}; + +/** + * struct knav_dma_desc: Host packet descriptor layout + * @desc_info: Descriptor information like id, type, length + * @tag_info: Flow tag info written in during RX + * @packet_info: Queue Manager, policy, flags etc + * @buff_len: Buffer length in bytes + * @buff: Buffer pointer + * @next_desc: For chaining the descriptors + * @orig_len: length since 'buff_len' can be overwritten + * @orig_buff: buff pointer since 'buff' can be overwritten + * @epib: Extended packet info block + * @psdata: Protocol specific + * @sw_data: Software private data not touched by h/w + */ +struct knav_dma_desc { + __le32 desc_info; + __le32 tag_info; + __le32 packet_info; + __le32 buff_len; + __le32 buff; + __le32 next_desc; + __le32 orig_len; + __le32 orig_buff; + __le32 epib[KNAV_DMA_NUM_EPIB_WORDS]; + __le32 psdata[KNAV_DMA_NUM_PS_WORDS]; + u32 sw_data[KNAV_DMA_NUM_SW_DATA_WORDS]; +} ____cacheline_aligned; + +#if IS_ENABLED(CONFIG_KEYSTONE_NAVIGATOR_DMA) +void *knav_dma_open_channel(struct device *dev, const char *name, + struct knav_dma_cfg *config); +void knav_dma_close_channel(void *channel); +int knav_dma_get_flow(void *channel); +bool knav_dma_device_ready(void); +#else +static inline void *knav_dma_open_channel(struct device *dev, const char *name, + struct knav_dma_cfg *config) +{ + return (void *) NULL; +} +static inline void knav_dma_close_channel(void *channel) +{} + +static inline int knav_dma_get_flow(void *channel) +{ + return -EINVAL; +} + +static inline bool knav_dma_device_ready(void) +{ + return false; +} + +#endif + +#endif /* __SOC_TI_KEYSTONE_NAVIGATOR_DMA_H__ */ diff --git a/include/linux/soc/ti/knav_qmss.h b/include/linux/soc/ti/knav_qmss.h new file mode 100644 index 000000000..175f466eb --- /dev/null +++ b/include/linux/soc/ti/knav_qmss.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Keystone Navigator Queue Management Sub-System header + * + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com + * Author: Sandeep Nair <sandeep_n@ti.com> + * Cyril Chemparathy <cyril@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + */ + +#ifndef __SOC_TI_KNAV_QMSS_H__ +#define __SOC_TI_KNAV_QMSS_H__ + +#include <linux/err.h> +#include <linux/time.h> +#include <linux/atomic.h> +#include <linux/device.h> +#include <linux/fcntl.h> +#include <linux/dma-mapping.h> + +/* queue types */ +#define KNAV_QUEUE_QPEND ((unsigned)-2) /* interruptible qpend queue */ +#define KNAV_QUEUE_ACC ((unsigned)-3) /* Accumulated queue */ +#define KNAV_QUEUE_GP ((unsigned)-4) /* General purpose queue */ + +/* queue flags */ +#define KNAV_QUEUE_SHARED 0x0001 /* Queue can be shared */ + +/** + * enum knav_queue_ctrl_cmd - queue operations. + * @KNAV_QUEUE_GET_ID: Get the ID number for an open queue + * @KNAV_QUEUE_FLUSH: forcibly empty a queue if possible + * @KNAV_QUEUE_SET_NOTIFIER: Set a notifier callback to a queue handle. + * @KNAV_QUEUE_ENABLE_NOTIFY: Enable notifier callback for a queue handle. + * @KNAV_QUEUE_DISABLE_NOTIFY: Disable notifier callback for a queue handle. + * @KNAV_QUEUE_GET_COUNT: Get number of queues. + */ +enum knav_queue_ctrl_cmd { + KNAV_QUEUE_GET_ID, + KNAV_QUEUE_FLUSH, + KNAV_QUEUE_SET_NOTIFIER, + KNAV_QUEUE_ENABLE_NOTIFY, + KNAV_QUEUE_DISABLE_NOTIFY, + KNAV_QUEUE_GET_COUNT +}; + +/* Queue notifier callback prototype */ +typedef void (*knav_queue_notify_fn)(void *arg); + +/** + * struct knav_queue_notify_config: Notifier configuration + * @fn: Notifier function + * @fn_arg: Notifier function arguments + */ +struct knav_queue_notify_config { + knav_queue_notify_fn fn; + void *fn_arg; +}; + +void *knav_queue_open(const char *name, unsigned id, + unsigned flags); +void knav_queue_close(void *qhandle); +int knav_queue_device_control(void *qhandle, + enum knav_queue_ctrl_cmd cmd, + unsigned long arg); +dma_addr_t knav_queue_pop(void *qhandle, unsigned *size); +int knav_queue_push(void *qhandle, dma_addr_t dma, + unsigned size, unsigned flags); + +void *knav_pool_create(const char *name, + int num_desc, int region_id); +void knav_pool_destroy(void *ph); +int knav_pool_count(void *ph); +void *knav_pool_desc_get(void *ph); +void knav_pool_desc_put(void *ph, void *desc); +int knav_pool_desc_map(void *ph, void *desc, unsigned size, + dma_addr_t *dma, unsigned *dma_sz); +void *knav_pool_desc_unmap(void *ph, dma_addr_t dma, unsigned dma_sz); +dma_addr_t knav_pool_desc_virt_to_dma(void *ph, void *virt); +void *knav_pool_desc_dma_to_virt(void *ph, dma_addr_t dma); +bool knav_qmss_device_ready(void); + +#endif /* __SOC_TI_KNAV_QMSS_H__ */ diff --git a/include/linux/soc/ti/omap1-io.h b/include/linux/soc/ti/omap1-io.h new file mode 100644 index 000000000..9a60f4589 --- /dev/null +++ b/include/linux/soc/ti/omap1-io.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __ASM_ARCH_OMAP_IO_H +#define __ASM_ARCH_OMAP_IO_H + +#ifndef __ASSEMBLER__ +#include <linux/types.h> + +#ifdef CONFIG_ARCH_OMAP1 +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ +extern u8 omap_readb(u32 pa); +extern u16 omap_readw(u32 pa); +extern u32 omap_readl(u32 pa); +extern void omap_writeb(u8 v, u32 pa); +extern void omap_writew(u16 v, u32 pa); +extern void omap_writel(u32 v, u32 pa); +#elif defined(CONFIG_COMPILE_TEST) +static inline u8 omap_readb(u32 pa) { return 0; } +static inline u16 omap_readw(u32 pa) { return 0; } +static inline u32 omap_readl(u32 pa) { return 0; } +static inline void omap_writeb(u8 v, u32 pa) { } +static inline void omap_writew(u16 v, u32 pa) { } +static inline void omap_writel(u32 v, u32 pa) { } +#endif +#endif + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +#endif diff --git a/include/linux/soc/ti/omap1-mux.h b/include/linux/soc/ti/omap1-mux.h new file mode 100644 index 000000000..59c239b55 --- /dev/null +++ b/include/linux/soc/ti/omap1-mux.h @@ -0,0 +1,311 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __SOC_TI_OMAP1_MUX_H +#define __SOC_TI_OMAP1_MUX_H +/* + * This should not really be a global header, it reflects the + * traditional way that omap1 does pin muxing without the + * pinctrl subsystem. + */ + +enum omap7xx_index { + /* OMAP 730 keyboard */ + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, + + /* USB */ + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, + + /* MMC */ + MMC_7XX_CMD, + MMC_7XX_CLK, + MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, + + /* SPI */ + SPI_7XX_1, + SPI_7XX_2, + SPI_7XX_3, + SPI_7XX_4, + SPI_7XX_5, + SPI_7XX_6, + + /* UART */ + UART_7XX_1, + UART_7XX_2, +}; + +enum omap1xxx_index { + /* UART1 (BT_UART_GATING)*/ + UART1_TX = 0, + UART1_RTS, + + /* UART2 (COM_UART_GATING)*/ + UART2_TX, + UART2_RX, + UART2_CTS, + UART2_RTS, + + /* UART3 (GIGA_UART_GATING) */ + UART3_TX, + UART3_RX, + UART3_CTS, + UART3_RTS, + UART3_CLKREQ, + UART3_BCLK, /* 12MHz clock out */ + Y15_1610_UART3_RTS, + + /* PWT & PWL */ + PWT, + PWL, + + /* USB master generic */ + R18_USB_VBUS, + R18_1510_USB_GPIO0, + W4_USB_PUEN, + W4_USB_CLKO, + W4_USB_HIGHZ, + W4_GPIO58, + + /* USB1 master */ + USB1_SUSP, + USB1_SEO, + W13_1610_USB1_SE0, + USB1_TXEN, + USB1_TXD, + USB1_VP, + USB1_VM, + USB1_RCV, + USB1_SPEED, + R13_1610_USB1_SPEED, + R13_1710_USB1_SE0, + + /* USB2 master */ + USB2_SUSP, + USB2_VP, + USB2_TXEN, + USB2_VM, + USB2_RCV, + USB2_SEO, + USB2_TXD, + + /* OMAP-1510 GPIO */ + R18_1510_GPIO0, + R19_1510_GPIO1, + M14_1510_GPIO2, + + /* OMAP1610 GPIO */ + P18_1610_GPIO3, + Y15_1610_GPIO17, + + /* OMAP-1710 GPIO */ + R18_1710_GPIO0, + V2_1710_GPIO10, + N21_1710_GPIO14, + W15_1710_GPIO40, + + /* MPUIO */ + MPUIO2, + N15_1610_MPUIO2, + MPUIO4, + MPUIO5, + T20_1610_MPUIO5, + W11_1610_MPUIO6, + V10_1610_MPUIO7, + W11_1610_MPUIO9, + V10_1610_MPUIO10, + W10_1610_MPUIO11, + E20_1610_MPUIO13, + U20_1610_MPUIO14, + E19_1610_MPUIO15, + + /* MCBSP2 */ + MCBSP2_CLKR, + MCBSP2_CLKX, + MCBSP2_DR, + MCBSP2_DX, + MCBSP2_FSR, + MCBSP2_FSX, + + /* MCBSP3 */ + MCBSP3_CLKX, + + /* Misc ballouts */ + BALLOUT_V8_ARMIO3, + N20_HDQ, + + /* OMAP-1610 MMC2 */ + W8_1610_MMC2_DAT0, + V8_1610_MMC2_DAT1, + W15_1610_MMC2_DAT2, + R10_1610_MMC2_DAT3, + Y10_1610_MMC2_CLK, + Y8_1610_MMC2_CMD, + V9_1610_MMC2_CMDDIR, + V5_1610_MMC2_DATDIR0, + W19_1610_MMC2_DATDIR1, + R18_1610_MMC2_CLKIN, + + /* OMAP-1610 External Trace Interface */ + M19_1610_ETM_PSTAT0, + L15_1610_ETM_PSTAT1, + L18_1610_ETM_PSTAT2, + L19_1610_ETM_D0, + J19_1610_ETM_D6, + J18_1610_ETM_D7, + + /* OMAP16XX GPIO */ + P20_1610_GPIO4, + V9_1610_GPIO7, + W8_1610_GPIO9, + N20_1610_GPIO11, + N19_1610_GPIO13, + P10_1610_GPIO22, + V5_1610_GPIO24, + AA20_1610_GPIO_41, + W19_1610_GPIO48, + M7_1610_GPIO62, + V14_16XX_GPIO37, + R9_16XX_GPIO18, + L14_16XX_GPIO49, + + /* OMAP-1610 uWire */ + V19_1610_UWIRE_SCLK, + U18_1610_UWIRE_SDI, + W21_1610_UWIRE_SDO, + N14_1610_UWIRE_CS0, + P15_1610_UWIRE_CS3, + N15_1610_UWIRE_CS1, + + /* OMAP-1610 SPI */ + U19_1610_SPIF_SCK, + U18_1610_SPIF_DIN, + P20_1610_SPIF_DIN, + W21_1610_SPIF_DOUT, + R18_1610_SPIF_DOUT, + N14_1610_SPIF_CS0, + N15_1610_SPIF_CS1, + T19_1610_SPIF_CS2, + P15_1610_SPIF_CS3, + + /* OMAP-1610 Flash */ + L3_1610_FLASH_CS2B_OE, + M8_1610_FLASH_CS2B_WE, + + /* First MMC */ + MMC_CMD, + MMC_DAT1, + MMC_DAT2, + MMC_DAT0, + MMC_CLK, + MMC_DAT3, + + /* OMAP-1710 MMC CMDDIR and DATDIR0 */ + M15_1710_MMC_CLKI, + P19_1710_MMC_CMDDIR, + P20_1710_MMC_DATDIR0, + + /* OMAP-1610 USB0 alternate pin configuration */ + W9_USB0_TXEN, + AA9_USB0_VP, + Y5_USB0_RCV, + R9_USB0_VM, + V6_USB0_TXD, + W5_USB0_SE0, + V9_USB0_SPEED, + V9_USB0_SUSP, + + /* USB2 */ + W9_USB2_TXEN, + AA9_USB2_VP, + Y5_USB2_RCV, + R9_USB2_VM, + V6_USB2_TXD, + W5_USB2_SE0, + + /* 16XX UART */ + R13_1610_UART1_TX, + V14_16XX_UART1_RX, + R14_1610_UART1_CTS, + AA15_1610_UART1_RTS, + R9_16XX_UART2_RX, + L14_16XX_UART3_RX, + + /* I2C OMAP-1610 */ + I2C_SCL, + I2C_SDA, + + /* Keypad */ + F18_1610_KBC0, + D20_1610_KBC1, + D19_1610_KBC2, + E18_1610_KBC3, + C21_1610_KBC4, + G18_1610_KBR0, + F19_1610_KBR1, + H14_1610_KBR2, + E20_1610_KBR3, + E19_1610_KBR4, + N19_1610_KBR5, + + /* Power management */ + T20_1610_LOW_PWR, + + /* MCLK Settings */ + V5_1710_MCLK_ON, + V5_1710_MCLK_OFF, + R10_1610_MCLK_ON, + R10_1610_MCLK_OFF, + + /* CompactFlash controller */ + P11_1610_CF_CD2, + R11_1610_CF_IOIS16, + V10_1610_CF_IREQ, + W10_1610_CF_RESET, + W11_1610_CF_CD1, + + /* parallel camera */ + J15_1610_CAM_LCLK, + J18_1610_CAM_D7, + J19_1610_CAM_D6, + J14_1610_CAM_D5, + K18_1610_CAM_D4, + K19_1610_CAM_D3, + K15_1610_CAM_D2, + K14_1610_CAM_D1, + L19_1610_CAM_D0, + L18_1610_CAM_VS, + L15_1610_CAM_HS, + M19_1610_CAM_RSTZ, + Y15_1610_CAM_OUTCLK, + + /* serial camera */ + H19_1610_CAM_EXCLK, + Y12_1610_CCP_CLKP, + W13_1610_CCP_CLKM, + W14_1610_CCP_DATAP, + Y14_1610_CCP_DATAM, + +}; + +#ifdef CONFIG_OMAP_MUX +extern int omap_cfg_reg(unsigned long reg_cfg); +#else +static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } +#endif + +#endif diff --git a/include/linux/soc/ti/omap1-soc.h b/include/linux/soc/ti/omap1-soc.h new file mode 100644 index 000000000..81008d400 --- /dev/null +++ b/include/linux/soc/ti/omap1-soc.h @@ -0,0 +1,198 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * OMAP cpu type detection + * + * Copyright (C) 2004, 2008 Nokia Corporation + * + * Copyright (C) 2009-11 Texas Instruments. + * + * Written by Tony Lindgren <tony.lindgren@nokia.com> + * + * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com> + */ + +#ifndef __ASM_ARCH_OMAP_CPU_H +#define __ASM_ARCH_OMAP_CPU_H + +/* + * Test if multicore OMAP support is needed + */ +#undef MULTI_OMAP1 +#undef OMAP_NAME + +#ifdef CONFIG_ARCH_OMAP730 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap730 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP850 +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap850 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP15XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap1510 +# endif +#endif +#ifdef CONFIG_ARCH_OMAP16XX +# ifdef OMAP_NAME +# undef MULTI_OMAP1 +# define MULTI_OMAP1 +# else +# define OMAP_NAME omap16xx +# endif +#endif + +/* + * omap_rev bits: + * CPU id bits (0730, 1510, 1710, 2422...) [31:16] + * CPU revision (See _REV_ defined in cpu.h) [15:08] + * CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00] + */ +unsigned int omap_rev(void); + +/* + * Get the CPU revision for OMAP devices + */ +#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff) + +/* + * Macros to group OMAP into cpu classes. + * These can be used in most places. + * cpu_is_omap7xx(): True for OMAP730, OMAP850 + * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 + * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 + */ +#define GET_OMAP_CLASS (omap_rev() & 0xff) + +#define IS_OMAP_CLASS(class, id) \ +static inline int is_omap ##class (void) \ +{ \ + return (GET_OMAP_CLASS == (id)) ? 1 : 0; \ +} + +#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff) + +#define IS_OMAP_SUBCLASS(subclass, id) \ +static inline int is_omap ##subclass (void) \ +{ \ + return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ +} + +IS_OMAP_CLASS(7xx, 0x07) +IS_OMAP_CLASS(15xx, 0x15) +IS_OMAP_CLASS(16xx, 0x16) + +#define cpu_is_omap7xx() 0 +#define cpu_is_omap15xx() 0 +#define cpu_is_omap16xx() 0 + +#if defined(MULTI_OMAP1) +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() is_omap7xx() +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() is_omap15xx() +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() is_omap16xx() +# endif +#else +# if defined(CONFIG_ARCH_OMAP730) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP850) +# undef cpu_is_omap7xx +# define cpu_is_omap7xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap15xx +# define cpu_is_omap15xx() 1 +# endif +# if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap16xx +# define cpu_is_omap16xx() 1 +# endif +#endif + +/* + * Macros to detect individual cpu types. + * These are only rarely needed. + * cpu_is_omap310(): True for OMAP310 + * cpu_is_omap1510(): True for OMAP1510 + * cpu_is_omap1610(): True for OMAP1610 + * cpu_is_omap1611(): True for OMAP1611 + * cpu_is_omap5912(): True for OMAP5912 + * cpu_is_omap1621(): True for OMAP1621 + * cpu_is_omap1710(): True for OMAP1710 + */ +#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) + +#define IS_OMAP_TYPE(type, id) \ +static inline int is_omap ##type (void) \ +{ \ + return (GET_OMAP_TYPE == (id)) ? 1 : 0; \ +} + +IS_OMAP_TYPE(310, 0x0310) +IS_OMAP_TYPE(1510, 0x1510) +IS_OMAP_TYPE(1610, 0x1610) +IS_OMAP_TYPE(1611, 0x1611) +IS_OMAP_TYPE(5912, 0x1611) +IS_OMAP_TYPE(1621, 0x1621) +IS_OMAP_TYPE(1710, 0x1710) + +#define cpu_is_omap310() 0 +#define cpu_is_omap1510() 0 +#define cpu_is_omap1610() 0 +#define cpu_is_omap5912() 0 +#define cpu_is_omap1611() 0 +#define cpu_is_omap1621() 0 +#define cpu_is_omap1710() 0 + +#define cpu_class_is_omap1() 1 + +/* + * Whether we have MULTI_OMAP1 or not, we still need to distinguish + * between 310 vs. 1510 and 1611B/5912 vs. 1710. + */ + +#if defined(CONFIG_ARCH_OMAP15XX) +# undef cpu_is_omap310 +# undef cpu_is_omap1510 +# define cpu_is_omap310() is_omap310() +# define cpu_is_omap1510() is_omap1510() +#endif + +#if defined(CONFIG_ARCH_OMAP16XX) +# undef cpu_is_omap1610 +# undef cpu_is_omap1611 +# undef cpu_is_omap5912 +# undef cpu_is_omap1621 +# undef cpu_is_omap1710 +# define cpu_is_omap1610() is_omap1610() +# define cpu_is_omap1611() is_omap1611() +# define cpu_is_omap5912() is_omap5912() +# define cpu_is_omap1621() is_omap1621() +# define cpu_is_omap1710() is_omap1710() +#endif + +#endif diff --git a/include/linux/soc/ti/omap1-usb.h b/include/linux/soc/ti/omap1-usb.h new file mode 100644 index 000000000..674886986 --- /dev/null +++ b/include/linux/soc/ti/omap1-usb.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SOC_TI_OMAP1_USB +#define __SOC_TI_OMAP1_USB +/* + * Constants in this file are used all over the place, in platform + * code, as well as the udc, phy and ohci drivers. + * This is not a great design, but unlikely to get fixed after + * such a long time. Don't do this elsewhere. + */ + +#define OMAP1_OTG_BASE 0xfffb0400 +#define OMAP1_UDC_BASE 0xfffb4000 + +#define OMAP2_UDC_BASE 0x4805e200 +#define OMAP2_OTG_BASE 0x4805e300 +#define OTG_BASE OMAP1_OTG_BASE +#define UDC_BASE OMAP1_UDC_BASE + +/* + * OTG and transceiver registers, for OMAPs starting with ARM926 + */ +#define OTG_REV (OTG_BASE + 0x00) +#define OTG_SYSCON_1 (OTG_BASE + 0x04) +# define USB2_TRX_MODE(w) (((w)>>24)&0x07) +# define USB1_TRX_MODE(w) (((w)>>20)&0x07) +# define USB0_TRX_MODE(w) (((w)>>16)&0x07) +# define OTG_IDLE_EN (1 << 15) +# define HST_IDLE_EN (1 << 14) +# define DEV_IDLE_EN (1 << 13) +# define OTG_RESET_DONE (1 << 2) +# define OTG_SOFT_RESET (1 << 1) +#define OTG_SYSCON_2 (OTG_BASE + 0x08) +# define OTG_EN (1 << 31) +# define USBX_SYNCHRO (1 << 30) +# define OTG_MST16 (1 << 29) +# define SRP_GPDATA (1 << 28) +# define SRP_GPDVBUS (1 << 27) +# define SRP_GPUVBUS(w) (((w)>>24)&0x07) +# define A_WAIT_VRISE(w) (((w)>>20)&0x07) +# define B_ASE_BRST(w) (((w)>>16)&0x07) +# define SRP_DPW (1 << 14) +# define SRP_DATA (1 << 13) +# define SRP_VBUS (1 << 12) +# define OTG_PADEN (1 << 10) +# define HMC_PADEN (1 << 9) +# define UHOST_EN (1 << 8) +# define HMC_TLLSPEED (1 << 7) +# define HMC_TLLATTACH (1 << 6) +# define OTG_HMC(w) (((w)>>0)&0x3f) +#define OTG_CTRL (OTG_BASE + 0x0c) +# define OTG_USB2_EN (1 << 29) +# define OTG_USB2_DP (1 << 28) +# define OTG_USB2_DM (1 << 27) +# define OTG_USB1_EN (1 << 26) +# define OTG_USB1_DP (1 << 25) +# define OTG_USB1_DM (1 << 24) +# define OTG_USB0_EN (1 << 23) +# define OTG_USB0_DP (1 << 22) +# define OTG_USB0_DM (1 << 21) +# define OTG_ASESSVLD (1 << 20) +# define OTG_BSESSEND (1 << 19) +# define OTG_BSESSVLD (1 << 18) +# define OTG_VBUSVLD (1 << 17) +# define OTG_ID (1 << 16) +# define OTG_DRIVER_SEL (1 << 15) +# define OTG_A_SETB_HNPEN (1 << 12) +# define OTG_A_BUSREQ (1 << 11) +# define OTG_B_HNPEN (1 << 9) +# define OTG_B_BUSREQ (1 << 8) +# define OTG_BUSDROP (1 << 7) +# define OTG_PULLDOWN (1 << 5) +# define OTG_PULLUP (1 << 4) +# define OTG_DRV_VBUS (1 << 3) +# define OTG_PD_VBUS (1 << 2) +# define OTG_PU_VBUS (1 << 1) +# define OTG_PU_ID (1 << 0) +#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ +# define DRIVER_SWITCH (1 << 15) +# define A_VBUS_ERR (1 << 13) +# define A_REQ_TMROUT (1 << 12) +# define A_SRP_DETECT (1 << 11) +# define B_HNP_FAIL (1 << 10) +# define B_SRP_TMROUT (1 << 9) +# define B_SRP_DONE (1 << 8) +# define B_SRP_STARTED (1 << 7) +# define OPRT_CHG (1 << 0) +#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ + // same bits as in IRQ_EN +#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ +# define OTGVPD (1 << 14) +# define OTGVPU (1 << 13) +# define OTGPUID (1 << 12) +# define USB2VDR (1 << 10) +# define USB2PDEN (1 << 9) +# define USB2PUEN (1 << 8) +# define USB1VDR (1 << 6) +# define USB1PDEN (1 << 5) +# define USB1PUEN (1 << 4) +# define USB0VDR (1 << 2) +# define USB0PDEN (1 << 1) +# define USB0PUEN (1 << 0) +#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ +#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ + +/*-------------------------------------------------------------------------*/ + +/* OMAP1 */ +#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) +# define CONF_USB2_UNI_R (1 << 8) +# define CONF_USB1_UNI_R (1 << 7) +# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) +# define CONF_USB0_ISOLATE_R (1 << 3) +# define CONF_USB_PWRDN_DM_R (1 << 2) +# define CONF_USB_PWRDN_DP_R (1 << 1) + +#endif diff --git a/include/linux/soc/ti/ti-msgmgr.h b/include/linux/soc/ti/ti-msgmgr.h new file mode 100644 index 000000000..543da257a --- /dev/null +++ b/include/linux/soc/ti/ti-msgmgr.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Texas Instruments' Message Manager + * + * Copyright (C) 2015-2022 Texas Instruments Incorporated - https://www.ti.com/ + * Nishanth Menon + */ + +#ifndef TI_MSGMGR_H +#define TI_MSGMGR_H + +struct mbox_chan; + +/** + * struct ti_msgmgr_message - Message Manager structure + * @len: Length of data in the Buffer + * @buf: Buffer pointer + * @chan_rx: Expected channel for response, must be provided to use polled rx + * @timeout_rx_ms: Timeout value to use if polling for response + * + * This is the structure for data used in mbox_send_message + * the length of data buffer used depends on the SoC integration + * parameters - each message may be 64, 128 bytes long depending + * on SoC. Client is supposed to be aware of this. + */ +struct ti_msgmgr_message { + size_t len; + u8 *buf; + struct mbox_chan *chan_rx; + int timeout_rx_ms; +}; + +#endif /* TI_MSGMGR_H */ diff --git a/include/linux/soc/ti/ti_sci_inta_msi.h b/include/linux/soc/ti/ti_sci_inta_msi.h new file mode 100644 index 000000000..4dba2f2af --- /dev/null +++ b/include/linux/soc/ti/ti_sci_inta_msi.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Texas Instruments' K3 TI SCI INTA MSI helper + * + * Copyright (C) 2018-2019 Texas Instruments Incorporated - https://www.ti.com/ + * Lokesh Vutla <lokeshvutla@ti.com> + */ + +#ifndef __INCLUDE_LINUX_TI_SCI_INTA_MSI_H +#define __INCLUDE_LINUX_TI_SCI_INTA_MSI_H + +#include <linux/msi.h> +#include <linux/soc/ti/ti_sci_protocol.h> + +struct irq_domain +*ti_sci_inta_msi_create_irq_domain(struct fwnode_handle *fwnode, + struct msi_domain_info *info, + struct irq_domain *parent); +int ti_sci_inta_msi_domain_alloc_irqs(struct device *dev, + struct ti_sci_resource *res); +#endif /* __INCLUDE_LINUX_IRQCHIP_TI_SCI_INTA_H */ diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h new file mode 100644 index 000000000..bd0d11af7 --- /dev/null +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -0,0 +1,654 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Texas Instruments System Control Interface Protocol + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/ + * Nishanth Menon + */ + +#ifndef __TISCI_PROTOCOL_H +#define __TISCI_PROTOCOL_H + +/** + * struct ti_sci_version_info - version information structure + * @abi_major: Major ABI version. Change here implies risk of backward + * compatibility break. + * @abi_minor: Minor ABI version. Change here implies new feature addition, + * or compatible change in ABI. + * @firmware_revision: Firmware revision (not usually used). + * @firmware_description: Firmware description (not usually used). + */ +struct ti_sci_version_info { + u8 abi_major; + u8 abi_minor; + u16 firmware_revision; + char firmware_description[32]; +}; + +struct ti_sci_handle; + +/** + * struct ti_sci_core_ops - SoC Core Operations + * @reboot_device: Reboot the SoC + * Returns 0 for successful request(ideally should never return), + * else returns corresponding error value. + */ +struct ti_sci_core_ops { + int (*reboot_device)(const struct ti_sci_handle *handle); +}; + +/** + * struct ti_sci_dev_ops - Device control operations + * @get_device: Command to request for device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @idle_device: Command to idle a device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @put_device: Command to release a device managed by TISCI + * Returns 0 for successful release, else returns corresponding + * error message. + * @is_valid: Check if the device ID is a valid ID. + * Returns 0 if the ID is valid, else returns corresponding error. + * @get_context_loss_count: Command to retrieve context loss counter - this + * increments every time the device looses context. Overflow + * is possible. + * - count: pointer to u32 which will retrieve counter + * Returns 0 for successful information request and count has + * proper data, else returns corresponding error message. + * @is_idle: Reports back about device idle state + * - req_state: Returns requested idle state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_stop: Reports back about device stop state + * - req_state: Returns requested stop state + * - current_state: Returns current stop state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_on: Reports back about device ON(or active) state + * - req_state: Returns requested ON state + * - current_state: Returns current ON state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_transitioning: Reports back if the device is in the middle of transition + * of state. + * -current_state: Returns 'true' if currently transitioning. + * @set_device_resets: Command to configure resets for device managed by TISCI. + * -reset_state: Device specific reset bit field + * Returns 0 for successful request, else returns + * corresponding error message. + * @get_device_resets: Command to read state of resets for device managed + * by TISCI. + * -reset_state: pointer to u32 which will retrieve resets + * Returns 0 for successful request, else returns + * corresponding error message. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_dev_ops { + int (*get_device)(const struct ti_sci_handle *handle, u32 id); + int (*get_device_exclusive)(const struct ti_sci_handle *handle, u32 id); + int (*idle_device)(const struct ti_sci_handle *handle, u32 id); + int (*idle_device_exclusive)(const struct ti_sci_handle *handle, + u32 id); + int (*put_device)(const struct ti_sci_handle *handle, u32 id); + int (*is_valid)(const struct ti_sci_handle *handle, u32 id); + int (*get_context_loss_count)(const struct ti_sci_handle *handle, + u32 id, u32 *count); + int (*is_idle)(const struct ti_sci_handle *handle, u32 id, + bool *requested_state); + int (*is_stop)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id, + bool *current_state); + int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 reset_state); + int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 *reset_state); +}; + +/** + * struct ti_sci_clk_ops - Clock control operations + * @get_clock: Request for activation of clock and manage by processor + * - needs_ssc: 'true' if Spread Spectrum clock is desired. + * - can_change_freq: 'true' if frequency change is desired. + * - enable_input_term: 'true' if input termination is desired. + * @idle_clock: Request for Idling a clock managed by processor + * @put_clock: Release the clock to be auto managed by TISCI + * @is_auto: Is the clock being auto managed + * - req_state: state indicating if the clock is auto managed + * @is_on: Is the clock ON + * - req_state: if the clock is requested to be forced ON + * - current_state: if the clock is currently ON + * @is_off: Is the clock OFF + * - req_state: if the clock is requested to be forced OFF + * - current_state: if the clock is currently Gated + * @set_parent: Set the clock source of a specific device clock + * - parent_id: Parent clock identifier to set. + * @get_parent: Get the current clock source of a specific device clock + * - parent_id: Parent clock identifier which is the parent. + * @get_num_parents: Get the number of parents of the current clock source + * - num_parents: returns the number of parent clocks. + * @get_best_match_freq: Find a best matching frequency for a frequency + * range. + * - match_freq: Best matching frequency in Hz. + * @set_freq: Set the Clock frequency + * @get_freq: Get the Clock frequency + * - current_freq: Frequency in Hz that the clock is at. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -did: Device identifier this request is for + * -cid: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * -min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * -target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * -max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Request for the clock - NOTE: the client MUST maintain integrity of + * usage count by balancing get_clock with put_clock. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_clk_ops { + int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid, + bool needs_ssc, bool can_change_freq, + bool enable_input_term); + int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid); + int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid); + int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u32 cid, + bool *req_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 did, u32 cid, + bool *req_state, bool *current_state); + int (*is_off)(const struct ti_sci_handle *handle, u32 did, u32 cid, + bool *req_state, bool *current_state); + int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u32 cid, + u32 parent_id); + int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u32 cid, + u32 *parent_id); + int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did, + u32 cid, u32 *num_parents); + int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did, + u32 cid, u64 min_freq, u64 target_freq, + u64 max_freq, u64 *match_freq); + int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u32 cid, + u64 min_freq, u64 target_freq, u64 max_freq); + int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u32 cid, + u64 *current_freq); +}; + +/** + * struct ti_sci_resource_desc - Description of TI SCI resource instance range. + * @start: Start index of the first resource range. + * @num: Number of resources in the first range. + * @start_sec: Start index of the second resource range. + * @num_sec: Number of resources in the second range. + * @res_map: Bitmap to manage the allocation of these resources. + */ +struct ti_sci_resource_desc { + u16 start; + u16 num; + u16 start_sec; + u16 num_sec; + unsigned long *res_map; +}; + +/** + * struct ti_sci_rm_core_ops - Resource management core operations + * @get_range: Get a range of resources belonging to ti sci host. + * @get_rage_from_shost: Get a range of resources belonging to + * specified host id. + * - s_host: Host processing entity to which the + * resources are allocated + * + * NOTE: for these functions, all the parameters are consolidated and defined + * as below: + * - handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * - dev_id: TISCI device ID. + * - subtype: Resource assignment subtype that is being requested + * from the given device. + * - desc: Pointer to ti_sci_resource_desc to be updated with the resource + * range start index and number of resources + */ +struct ti_sci_rm_core_ops { + int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id, + u8 subtype, struct ti_sci_resource_desc *desc); + int (*get_range_from_shost)(const struct ti_sci_handle *handle, + u32 dev_id, u8 subtype, u8 s_host, + struct ti_sci_resource_desc *desc); +}; + +#define TI_SCI_RESASG_SUBTYPE_IR_OUTPUT 0 +#define TI_SCI_RESASG_SUBTYPE_IA_VINT 0xa +#define TI_SCI_RESASG_SUBTYPE_GLOBAL_EVENT_SEVT 0xd +/** + * struct ti_sci_rm_irq_ops: IRQ management operations + * @set_irq: Set an IRQ route between the requested source + * and destination + * @set_event_map: Set an Event based peripheral irq to Interrupt + * Aggregator. + * @free_irq: Free an IRQ route between the requested source + * and destination. + * @free_event_map: Free an event based peripheral irq to Interrupt + * Aggregator. + */ +struct ti_sci_rm_irq_ops { + int (*set_irq)(const struct ti_sci_handle *handle, u16 src_id, + u16 src_index, u16 dst_id, u16 dst_host_irq); + int (*set_event_map)(const struct ti_sci_handle *handle, u16 src_id, + u16 src_index, u16 ia_id, u16 vint, + u16 global_event, u8 vint_status_bit); + int (*free_irq)(const struct ti_sci_handle *handle, u16 src_id, + u16 src_index, u16 dst_id, u16 dst_host_irq); + int (*free_event_map)(const struct ti_sci_handle *handle, u16 src_id, + u16 src_index, u16 ia_id, u16 vint, + u16 global_event, u8 vint_status_bit); +}; + +/* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID BIT(0) +/* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID BIT(1) + /* RA config.count parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID BIT(2) +/* RA config.mode parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID BIT(3) +/* RA config.size parameter is valid for RM ring configure TI_SCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID BIT(4) +/* RA config.order_id parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5) +/* RA config.virtid parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_VIRTID_VALID BIT(6) +/* RA config.asel parameter is valid for RM ring configure TISCI message */ +#define TI_SCI_MSG_VALUE_RM_RING_ASEL_VALID BIT(7) + +#define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \ + (TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID | \ + TI_SCI_MSG_VALUE_RM_RING_ASEL_VALID) + +/** + * struct ti_sci_msg_rm_ring_cfg - Ring configuration + * + * Parameters for Navigator Subsystem ring configuration + * See @ti_sci_msg_rm_ring_cfg_req + */ +struct ti_sci_msg_rm_ring_cfg { + u32 valid_params; + u16 nav_id; + u16 index; + u32 addr_lo; + u32 addr_hi; + u32 count; + u8 mode; + u8 size; + u8 order_id; + u16 virtid; + u8 asel; +}; + +/** + * struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations + * @set_cfg: configure the SoC Navigator Subsystem Ring Accelerator ring + */ +struct ti_sci_rm_ringacc_ops { + int (*set_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_ring_cfg *params); +}; + +/** + * struct ti_sci_rm_psil_ops - PSI-L thread operations + * @pair: pair PSI-L source thread to a destination thread. + * If the src_thread is mapped to UDMA tchan, the corresponding channel's + * TCHAN_THRD_ID register is updated. + * If the dst_thread is mapped to UDMA rchan, the corresponding channel's + * RCHAN_THRD_ID register is updated. + * @unpair: unpair PSI-L source thread from a destination thread. + * If the src_thread is mapped to UDMA tchan, the corresponding channel's + * TCHAN_THRD_ID register is cleared. + * If the dst_thread is mapped to UDMA rchan, the corresponding channel's + * RCHAN_THRD_ID register is cleared. + */ +struct ti_sci_rm_psil_ops { + int (*pair)(const struct ti_sci_handle *handle, u32 nav_id, + u32 src_thread, u32 dst_thread); + int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id, + u32 src_thread, u32 dst_thread); +}; + +/* UDMAP channel types */ +#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR 2 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB 3 /* RX only */ +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR 10 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR 11 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR 12 +#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR 13 + +#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST 0 +#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO 2 + +#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES 1 +#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES 2 +#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES 3 + +#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_TCHAN 0 +#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_BCHAN 1 + +/* UDMAP TX/RX channel valid_params common declarations */ +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID BIT(0) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID BIT(1) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID BIT(2) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID BIT(3) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID BIT(4) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID BIT(5) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID BIT(6) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID BIT(7) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID BIT(8) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID BIT(14) + +/** + * Configures a Navigator Subsystem UDMAP transmit channel + * + * Configures a Navigator Subsystem UDMAP transmit channel registers. + * See @ti_sci_msg_rm_udmap_tx_ch_cfg_req + */ +struct ti_sci_msg_rm_udmap_tx_ch_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID BIT(12) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID BIT(13) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID BIT(15) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_EXTENDED_CH_TYPE_VALID BIT(16) + u16 nav_id; + u16 index; + u8 tx_pause_on_err; + u8 tx_filt_einfo; + u8 tx_filt_pswords; + u8 tx_atype; + u8 tx_chan_type; + u8 tx_supr_tdpkt; + u16 tx_fetch_size; + u8 tx_credit_count; + u16 txcq_qnum; + u8 tx_priority; + u8 tx_qos; + u8 tx_orderid; + u16 fdepth; + u8 tx_sched_priority; + u8 tx_burst_size; + u8 tx_tdtype; + u8 extended_ch_type; +}; + +/** + * Configures a Navigator Subsystem UDMAP receive channel + * + * Configures a Navigator Subsystem UDMAP receive channel registers. + * See @ti_sci_msg_rm_udmap_rx_ch_cfg_req + */ +struct ti_sci_msg_rm_udmap_rx_ch_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID BIT(12) + u16 nav_id; + u16 index; + u16 rx_fetch_size; + u16 rxcq_qnum; + u8 rx_priority; + u8 rx_qos; + u8 rx_orderid; + u8 rx_sched_priority; + u16 flowid_start; + u16 flowid_cnt; + u8 rx_pause_on_err; + u8 rx_atype; + u8 rx_chan_type; + u8 rx_ignore_short; + u8 rx_ignore_long; + u8 rx_burst_size; +}; + +/** + * Configures a Navigator Subsystem UDMAP receive flow + * + * Configures a Navigator Subsystem UDMAP receive flow's registers. + * See @tis_ci_msg_rm_udmap_flow_cfg_req + */ +struct ti_sci_msg_rm_udmap_flow_cfg { + u32 valid_params; +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID BIT(0) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID BIT(1) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID BIT(2) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID BIT(3) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID BIT(4) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID BIT(5) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID BIT(6) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID BIT(7) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID BIT(8) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID BIT(9) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID BIT(10) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID BIT(11) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID BIT(12) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID BIT(13) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID BIT(14) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID BIT(15) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID BIT(16) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID BIT(17) +#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID BIT(18) + u16 nav_id; + u16 flow_index; + u8 rx_einfo_present; + u8 rx_psinfo_present; + u8 rx_error_handling; + u8 rx_desc_type; + u16 rx_sop_offset; + u16 rx_dest_qnum; + u8 rx_src_tag_hi; + u8 rx_src_tag_lo; + u8 rx_dest_tag_hi; + u8 rx_dest_tag_lo; + u8 rx_src_tag_hi_sel; + u8 rx_src_tag_lo_sel; + u8 rx_dest_tag_hi_sel; + u8 rx_dest_tag_lo_sel; + u16 rx_fdq0_sz0_qnum; + u16 rx_fdq1_qnum; + u16 rx_fdq2_qnum; + u16 rx_fdq3_qnum; + u8 rx_ps_location; +}; + +/** + * struct ti_sci_rm_udmap_ops - UDMA Management operations + * @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel. + * @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel. + * @rx_flow_cfg1: configure SoC Navigator Subsystem UDMA receive flow. + */ +struct ti_sci_rm_udmap_ops { + int (*tx_ch_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params); + int (*rx_ch_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params); + int (*rx_flow_cfg)(const struct ti_sci_handle *handle, + const struct ti_sci_msg_rm_udmap_flow_cfg *params); +}; + +/** + * struct ti_sci_proc_ops - Processor Control operations + * @request: Request to control a physical processor. The requesting host + * should be in the processor access list + * @release: Relinquish a physical processor control + * @handover: Handover a physical processor control to another host + * in the permitted list + * @set_config: Set base configuration of a processor + * @set_control: Setup limited control flags in specific cases + * @get_status: Get the state of physical processor + * + * NOTE: The following paramteres are generic in nature for all these ops, + * -handle: Pointer to TI SCI handle as retrieved by *ti_sci_get_handle + * -pid: Processor ID + * -hid: Host ID + */ +struct ti_sci_proc_ops { + int (*request)(const struct ti_sci_handle *handle, u8 pid); + int (*release)(const struct ti_sci_handle *handle, u8 pid); + int (*handover)(const struct ti_sci_handle *handle, u8 pid, u8 hid); + int (*set_config)(const struct ti_sci_handle *handle, u8 pid, + u64 boot_vector, u32 cfg_set, u32 cfg_clr); + int (*set_control)(const struct ti_sci_handle *handle, u8 pid, + u32 ctrl_set, u32 ctrl_clr); + int (*get_status)(const struct ti_sci_handle *handle, u8 pid, + u64 *boot_vector, u32 *cfg_flags, u32 *ctrl_flags, + u32 *status_flags); +}; + +/** + * struct ti_sci_ops - Function support for TI SCI + * @dev_ops: Device specific operations + * @clk_ops: Clock specific operations + * @rm_core_ops: Resource management core operations. + * @rm_irq_ops: IRQ management specific operations + * @proc_ops: Processor Control specific operations + */ +struct ti_sci_ops { + struct ti_sci_core_ops core_ops; + struct ti_sci_dev_ops dev_ops; + struct ti_sci_clk_ops clk_ops; + struct ti_sci_rm_core_ops rm_core_ops; + struct ti_sci_rm_irq_ops rm_irq_ops; + struct ti_sci_rm_ringacc_ops rm_ring_ops; + struct ti_sci_rm_psil_ops rm_psil_ops; + struct ti_sci_rm_udmap_ops rm_udmap_ops; + struct ti_sci_proc_ops proc_ops; +}; + +/** + * struct ti_sci_handle - Handle returned to TI SCI clients for usage. + * @version: structure containing version information + * @ops: operations that are made available to TI SCI clients + */ +struct ti_sci_handle { + struct ti_sci_version_info version; + struct ti_sci_ops ops; +}; + +#define TI_SCI_RESOURCE_NULL 0xffff + +/** + * struct ti_sci_resource - Structure representing a resource assigned + * to a device. + * @sets: Number of sets available from this resource type + * @lock: Lock to guard the res map in each set. + * @desc: Array of resource descriptors. + */ +struct ti_sci_resource { + u16 sets; + raw_spinlock_t lock; + struct ti_sci_resource_desc *desc; +}; + +#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL) +const struct ti_sci_handle *ti_sci_get_handle(struct device *dev); +int ti_sci_put_handle(const struct ti_sci_handle *handle); +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev); +const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np, + const char *property); +const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev, + const char *property); +u16 ti_sci_get_free_resource(struct ti_sci_resource *res); +void ti_sci_release_resource(struct ti_sci_resource *res, u16 id); +u32 ti_sci_get_num_resources(struct ti_sci_resource *res); +struct ti_sci_resource * +devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, + struct device *dev, u32 dev_id, char *of_prop); +struct ti_sci_resource * +devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev, + u32 dev_id, u32 sub_type); + +#else /* CONFIG_TI_SCI_PROTOCOL */ + +static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +static inline int ti_sci_put_handle(const struct ti_sci_handle *handle) +{ + return -EINVAL; +} + +static inline +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +static inline +const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np, + const char *property) +{ + return ERR_PTR(-EINVAL); +} + +static inline +const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev, + const char *property) +{ + return ERR_PTR(-EINVAL); +} + +static inline u16 ti_sci_get_free_resource(struct ti_sci_resource *res) +{ + return TI_SCI_RESOURCE_NULL; +} + +static inline void ti_sci_release_resource(struct ti_sci_resource *res, u16 id) +{ +} + +static inline u32 ti_sci_get_num_resources(struct ti_sci_resource *res) +{ + return 0; +} + +static inline struct ti_sci_resource * +devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle, + struct device *dev, u32 dev_id, char *of_prop) +{ + return ERR_PTR(-EINVAL); +} + +static inline struct ti_sci_resource * +devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev, + u32 dev_id, u32 sub_type) +{ + return ERR_PTR(-EINVAL); +} +#endif /* CONFIG_TI_SCI_PROTOCOL */ + +#endif /* __TISCI_PROTOCOL_H */ |