diff options
Diffstat (limited to 'include/linux/usb/usb338x.h')
-rw-r--r-- | include/linux/usb/usb338x.h | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/include/linux/usb/usb338x.h b/include/linux/usb/usb338x.h new file mode 100644 index 000000000..70a7e3cdb --- /dev/null +++ b/include/linux/usb/usb338x.h @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * USB 338x super/high/full speed USB device controller. + * Unlike many such controllers, this one talks PCI. + * + * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) + * Copyright (C) 2003 David Brownell + * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS + */ + +#ifndef __LINUX_USB_USB338X_H +#define __LINUX_USB_USB338X_H + +#include <linux/usb/net2280.h> + +/* + * Extra defined bits for net2280 registers + */ +#define SCRATCH 0x0b + +#define DEFECT7374_FSM_FIELD 28 +#define SUPER_SPEED 8 +#define DMA_REQUEST_OUTSTANDING 5 +#define DMA_PAUSE_DONE_INTERRUPT 26 +#define SET_ISOCHRONOUS_DELAY 24 +#define SET_SEL 22 +#define SUPER_SPEED_MODE 8 + +/*ep_cfg*/ +#define MAX_BURST_SIZE 24 +#define EP_FIFO_BYTE_COUNT 16 +#define IN_ENDPOINT_ENABLE 14 +#define IN_ENDPOINT_TYPE 12 +#define OUT_ENDPOINT_ENABLE 10 +#define OUT_ENDPOINT_TYPE 8 +#define USB3380_EP_CFG_MASK_IN ((0x3 << IN_ENDPOINT_TYPE) | \ + BIT(IN_ENDPOINT_ENABLE)) +#define USB3380_EP_CFG_MASK_OUT ((0x3 << OUT_ENDPOINT_TYPE) | \ + BIT(OUT_ENDPOINT_ENABLE)) + +struct usb338x_usb_ext_regs { + u32 usbclass; +#define DEVICE_PROTOCOL 16 +#define DEVICE_SUB_CLASS 8 +#define DEVICE_CLASS 0 + u32 ss_sel; +#define U2_SYSTEM_EXIT_LATENCY 8 +#define U1_SYSTEM_EXIT_LATENCY 0 + u32 ss_del; +#define U2_DEVICE_EXIT_LATENCY 8 +#define U1_DEVICE_EXIT_LATENCY 0 + u32 usb2lpm; +#define USB_L1_LPM_HIRD 2 +#define USB_L1_LPM_REMOTE_WAKE 1 +#define USB_L1_LPM_SUPPORT 0 + u32 usb3belt; +#define BELT_MULTIPLIER 10 +#define BEST_EFFORT_LATENCY_TOLERANCE 0 + u32 usbctl2; +#define LTM_ENABLE 7 +#define U2_ENABLE 6 +#define U1_ENABLE 5 +#define FUNCTION_SUSPEND 4 +#define USB3_CORE_ENABLE 3 +#define USB2_CORE_ENABLE 2 +#define SERIAL_NUMBER_STRING_ENABLE 0 + u32 in_timeout; +#define GPEP3_TIMEOUT 19 +#define GPEP2_TIMEOUT 18 +#define GPEP1_TIMEOUT 17 +#define GPEP0_TIMEOUT 16 +#define GPEP3_TIMEOUT_VALUE 13 +#define GPEP3_TIMEOUT_ENABLE 12 +#define GPEP2_TIMEOUT_VALUE 9 +#define GPEP2_TIMEOUT_ENABLE 8 +#define GPEP1_TIMEOUT_VALUE 5 +#define GPEP1_TIMEOUT_ENABLE 4 +#define GPEP0_TIMEOUT_VALUE 1 +#define GPEP0_TIMEOUT_ENABLE 0 + u32 isodelay; +#define ISOCHRONOUS_DELAY 0 +} __packed; + +struct usb338x_fifo_regs { + /* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */ + u32 ep_fifo_size_base; +#define IN_FIFO_BASE_ADDRESS 22 +#define IN_FIFO_SIZE 16 +#define OUT_FIFO_BASE_ADDRESS 6 +#define OUT_FIFO_SIZE 0 + u32 ep_fifo_out_wrptr; + u32 ep_fifo_out_rdptr; + u32 ep_fifo_in_wrptr; + u32 ep_fifo_in_rdptr; + u32 unused[3]; +} __packed; + + +/* Link layer */ +struct usb338x_ll_regs { + /* offset 0x700 */ + u32 ll_ltssm_ctrl1; + u32 ll_ltssm_ctrl2; + u32 ll_ltssm_ctrl3; + u32 unused1; + + /* 0x710 */ + u32 unused2; + u32 ll_general_ctrl0; + u32 ll_general_ctrl1; +#define PM_U3_AUTO_EXIT 29 +#define PM_U2_AUTO_EXIT 28 +#define PM_U1_AUTO_EXIT 27 +#define PM_FORCE_U2_ENTRY 26 +#define PM_FORCE_U1_ENTRY 25 +#define PM_LGO_COLLISION_SEND_LAU 24 +#define PM_DIR_LINK_REJECT 23 +#define PM_FORCE_LINK_ACCEPT 22 +#define PM_DIR_ENTRY_U3 20 +#define PM_DIR_ENTRY_U2 19 +#define PM_DIR_ENTRY_U1 18 +#define PM_U2_ENABLE 17 +#define PM_U1_ENABLE 16 +#define SKP_THRESHOLD_ADJUST_FMW 8 +#define RESEND_DPP_ON_LRTY_FMW 7 +#define DL_BIT_VALUE_FMW 6 +#define FORCE_DL_BIT 5 + u32 ll_general_ctrl2; +#define SELECT_INVERT_LANE_POLARITY 7 +#define FORCE_INVERT_LANE_POLARITY 6 + + /* 0x720 */ + u32 ll_general_ctrl3; + u32 ll_general_ctrl4; + u32 ll_error_gen; + u32 unused3; + + /* 0x730 */ + u32 unused4[4]; + + /* 0x740 */ + u32 unused5[2]; + u32 ll_lfps_5; +#define TIMER_LFPS_6US 16 + u32 ll_lfps_6; +#define TIMER_LFPS_80US 0 + + /* 0x750 */ + u32 unused6[8]; + + /* 0x770 */ + u32 unused7[3]; + u32 ll_tsn_counters_2; +#define HOT_TX_NORESET_TS2 24 + + /* 0x780 */ + u32 ll_tsn_counters_3; +#define HOT_RX_RESET_TS2 0 + u32 unused8[3]; + + /* 0x790 */ + u32 unused9; + u32 ll_lfps_timers_2; +#define LFPS_TIMERS_2_WORKAROUND_VALUE 0x084d + u32 unused10; + u32 ll_tsn_chicken_bit; +#define RECOVERY_IDLE_TO_RECOVER_FMW 3 +} __packed; + +/* protocol layer */ +struct usb338x_pl_regs { + /* offset 0x800 */ + u32 pl_reg_1; + u32 pl_reg_2; + u32 pl_reg_3; + u32 pl_reg_4; + u32 pl_ep_ctrl; + /* Protocol Layer Endpoint Control*/ +#define PL_EP_CTRL 0x810 +#define ENDPOINT_SELECT 0 + /* [4:0] */ +#define EP_INITIALIZED 16 +#define SEQUENCE_NUMBER_RESET 17 +#define CLEAR_ACK_ERROR_CODE 20 + u32 pl_reg_6; + u32 pl_reg_7; + u32 pl_reg_8; + u32 pl_ep_status_1; + /* Protocol Layer Endpoint Status 1*/ +#define PL_EP_STATUS_1 0x820 +#define STATE 16 +#define ACK_GOOD_NORMAL 0x11 +#define ACK_GOOD_MORE_ACKS_TO_COME 0x16 + u32 pl_ep_status_2; + u32 pl_ep_status_3; + /* Protocol Layer Endpoint Status 3*/ +#define PL_EP_STATUS_3 0x828 +#define SEQUENCE_NUMBER 0 + u32 pl_ep_status_4; + /* Protocol Layer Endpoint Status 4*/ +#define PL_EP_STATUS_4 0x82c + u32 pl_ep_cfg_4; + /* Protocol Layer Endpoint Configuration 4*/ +#define PL_EP_CFG_4 0x830 +#define NON_CTRL_IN_TOLERATE_BAD_DIR 6 +} __packed; + +#endif /* __LINUX_USB_USB338X_H */ |