diff options
Diffstat (limited to 'include/linux/usb_usual.h')
| -rw-r--r-- | include/linux/usb_usual.h | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h new file mode 100644 index 000000000..712363c7a --- /dev/null +++ b/include/linux/usb_usual.h @@ -0,0 +1,101 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Interface to the libusual. + * + * Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com> + * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com) + */ + +#ifndef __LINUX_USB_USUAL_H +#define __LINUX_USB_USUAL_H + + +/* We should do this for cleanliness... But other usb_foo.h do not do this. */ +/* #include <linux/usb.h> */ + +/* + * The flags field, which we store in usb_device_id.driver_info. + * It is compatible with the old usb-storage flags in lower 24 bits. + */ + +/* + * Static flag definitions. We use this roundabout technique so that the + * proc_info() routine can automatically display a message for each flag. + */ +#define US_DO_ALL_FLAGS \ + US_FLAG(SINGLE_LUN, 0x00000001) \ + /* allow access to only LUN 0 */ \ + US_FLAG(NEED_OVERRIDE, 0x00000002) \ + /* unusual_devs entry is necessary */ \ + US_FLAG(SCM_MULT_TARG, 0x00000004) \ + /* supports multiple targets */ \ + US_FLAG(FIX_INQUIRY, 0x00000008) \ + /* INQUIRY response needs faking */ \ + US_FLAG(FIX_CAPACITY, 0x00000010) \ + /* READ CAPACITY response too big */ \ + US_FLAG(IGNORE_RESIDUE, 0x00000020) \ + /* reported residue is wrong */ \ + US_FLAG(BULK32, 0x00000040) \ + /* Uses 32-byte CBW length */ \ + US_FLAG(NOT_LOCKABLE, 0x00000080) \ + /* PREVENT/ALLOW not supported */ \ + US_FLAG(GO_SLOW, 0x00000100) \ + /* Need delay after Command phase */ \ + US_FLAG(NO_WP_DETECT, 0x00000200) \ + /* Don't check for write-protect */ \ + US_FLAG(MAX_SECTORS_64, 0x00000400) \ + /* Sets max_sectors to 64 */ \ + US_FLAG(IGNORE_DEVICE, 0x00000800) \ + /* Don't claim device */ \ + US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \ + /* sometimes sizes is too big */ \ + US_FLAG(MAX_SECTORS_MIN,0x00002000) \ + /* Sets max_sectors to arch min */ \ + US_FLAG(BULK_IGNORE_TAG,0x00004000) \ + /* Ignore tag mismatch in bulk operations */ \ + US_FLAG(SANE_SENSE, 0x00008000) \ + /* Sane Sense (> 18 bytes) */ \ + US_FLAG(CAPACITY_OK, 0x00010000) \ + /* READ CAPACITY response is correct */ \ + US_FLAG(BAD_SENSE, 0x00020000) \ + /* Bad Sense (never more than 18 bytes) */ \ + US_FLAG(NO_READ_DISC_INFO, 0x00040000) \ + /* cannot handle READ_DISC_INFO */ \ + US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ + /* cannot handle READ_CAPACITY_16 */ \ + US_FLAG(INITIAL_READ10, 0x00100000) \ + /* Initial READ(10) (and others) must be retried */ \ + US_FLAG(WRITE_CACHE, 0x00200000) \ + /* Write Cache status is not available */ \ + US_FLAG(NEEDS_CAP16, 0x00400000) \ + /* cannot handle READ_CAPACITY_10 */ \ + US_FLAG(IGNORE_UAS, 0x00800000) \ + /* Device advertises UAS but it is broken */ \ + US_FLAG(BROKEN_FUA, 0x01000000) \ + /* Cannot handle FUA in WRITE or READ CDBs */ \ + US_FLAG(NO_ATA_1X, 0x02000000) \ + /* Cannot handle ATA_12 or ATA_16 CDBs */ \ + US_FLAG(NO_REPORT_OPCODES, 0x04000000) \ + /* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */ \ + US_FLAG(MAX_SECTORS_240, 0x08000000) \ + /* Sets max_sectors to 240 */ \ + US_FLAG(NO_REPORT_LUNS, 0x10000000) \ + /* Cannot handle REPORT_LUNS */ \ + US_FLAG(ALWAYS_SYNC, 0x20000000) \ + /* lies about caching, so always sync */ \ + US_FLAG(NO_SAME, 0x40000000) \ + /* Cannot handle WRITE_SAME */ \ + US_FLAG(SENSE_AFTER_SYNC, 0x80000000) \ + /* Do REQUEST_SENSE after SYNCHRONIZE_CACHE */ \ + +#define US_FLAG(name, value) US_FL_##name = value , +enum { US_DO_ALL_FLAGS }; +#undef US_FLAG + +#include <linux/usb/storage.h> + +extern int usb_usual_ignore_device(struct usb_interface *intf); +extern const struct usb_device_id usb_storage_usb_ids[]; + +#endif /* __LINUX_USB_USUAL_H */ |