diff options
Diffstat (limited to 'include/media/i2c/upd64083.h')
| -rw-r--r-- | include/media/i2c/upd64083.h | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/include/media/i2c/upd64083.h b/include/media/i2c/upd64083.h new file mode 100644 index 000000000..17fb7b520 --- /dev/null +++ b/include/media/i2c/upd64083.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines + * + * 2006 by Hans Verkuil (hverkuil@xs4all.nl) + */ + +#ifndef _UPD64083_H_ +#define _UPD64083_H_ + +/* There are two bits of information that the driver needs in order + to select the correct routing: the operating mode and the selection + of the Y input (external or internal). + + The first two operating modes expect a composite signal on the Y input, + the second two operating modes use both the Y and C inputs. + + Normally YCS_MODE is used for tuner and composite inputs, and the + YCNR mode is used for S-Video inputs. + + The external Y-ADC is selected when the composite input comes from a + upd64031a ghost reduction device. If this device is not present, or + the input is a S-Video signal, then the internal Y-ADC input should + be used. */ + +/* Operating modes: */ + +/* YCS mode: Y/C separation (burst locked clocking) */ +#define UPD64083_YCS_MODE 0 +/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */ +#define UPD64083_YCS_PLUS_MODE 1 + +/* Note: the following two modes cannot be used in combination with the + external Y-ADC. */ +/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */ +#define UPD64083_MNNR_MODE 2 +/* YCNR mode: frame recursive YCNR (burst locked clocking) */ +#define UPD64083_YCNR_MODE 3 + +/* Select external Y-ADC: this should be set if this device is used in + combination with the upd64031a ghost reduction device. + Otherwise leave at 0 (use internal Y-ADC). */ +#define UPD64083_EXT_Y_ADC (1 << 2) + +#endif |