summaryrefslogtreecommitdiffstats
path: root/include/rdma/rdmavt_qp.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/rdma/rdmavt_qp.h')
-rw-r--r--include/rdma/rdmavt_qp.h1003
1 files changed, 1003 insertions, 0 deletions
diff --git a/include/rdma/rdmavt_qp.h b/include/rdma/rdmavt_qp.h
new file mode 100644
index 000000000..2e58d5e6a
--- /dev/null
+++ b/include/rdma/rdmavt_qp.h
@@ -0,0 +1,1003 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
+/*
+ * Copyright(c) 2016 - 2020 Intel Corporation.
+ */
+
+#ifndef DEF_RDMAVT_INCQP_H
+#define DEF_RDMAVT_INCQP_H
+
+#include <rdma/rdma_vt.h>
+#include <rdma/ib_pack.h>
+#include <rdma/ib_verbs.h>
+#include <rdma/rdmavt_cq.h>
+#include <rdma/rvt-abi.h>
+/*
+ * Atomic bit definitions for r_aflags.
+ */
+#define RVT_R_WRID_VALID 0
+#define RVT_R_REWIND_SGE 1
+
+/*
+ * Bit definitions for r_flags.
+ */
+#define RVT_R_REUSE_SGE 0x01
+#define RVT_R_RDMAR_SEQ 0x02
+#define RVT_R_RSP_NAK 0x04
+#define RVT_R_RSP_SEND 0x08
+#define RVT_R_COMM_EST 0x10
+
+/*
+ * If a packet's QP[23:16] bits match this value, then it is
+ * a PSM packet and the hardware will expect a KDETH header
+ * following the BTH.
+ */
+#define RVT_KDETH_QP_PREFIX 0x80
+#define RVT_KDETH_QP_SUFFIX 0xffff
+#define RVT_KDETH_QP_PREFIX_MASK 0x00ff0000
+#define RVT_KDETH_QP_PREFIX_SHIFT 16
+#define RVT_KDETH_QP_BASE (u32)(RVT_KDETH_QP_PREFIX << \
+ RVT_KDETH_QP_PREFIX_SHIFT)
+#define RVT_KDETH_QP_MAX (u32)(RVT_KDETH_QP_BASE + RVT_KDETH_QP_SUFFIX)
+
+/*
+ * If a packet's LNH == BTH and DEST QPN[23:16] in the BTH match this
+ * prefix value, then it is an AIP packet with a DETH containing the entropy
+ * value in byte 4 following the BTH.
+ */
+#define RVT_AIP_QP_PREFIX 0x81
+#define RVT_AIP_QP_SUFFIX 0xffff
+#define RVT_AIP_QP_PREFIX_MASK 0x00ff0000
+#define RVT_AIP_QP_PREFIX_SHIFT 16
+#define RVT_AIP_QP_BASE (u32)(RVT_AIP_QP_PREFIX << \
+ RVT_AIP_QP_PREFIX_SHIFT)
+#define RVT_AIP_QPN_MAX BIT(RVT_AIP_QP_PREFIX_SHIFT)
+#define RVT_AIP_QP_MAX (u32)(RVT_AIP_QP_BASE + RVT_AIP_QPN_MAX - 1)
+
+/*
+ * Bit definitions for s_flags.
+ *
+ * RVT_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled
+ * RVT_S_BUSY - send tasklet is processing the QP
+ * RVT_S_TIMER - the RC retry timer is active
+ * RVT_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics
+ * RVT_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs
+ * before processing the next SWQE
+ * RVT_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete
+ * before processing the next SWQE
+ * RVT_S_WAIT_RNR - waiting for RNR timeout
+ * RVT_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
+ * RVT_S_WAIT_DMA - waiting for send DMA queue to drain before generating
+ * next send completion entry not via send DMA
+ * RVT_S_WAIT_PIO - waiting for a send buffer to be available
+ * RVT_S_WAIT_TX - waiting for a struct verbs_txreq to be available
+ * RVT_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available
+ * RVT_S_WAIT_KMEM - waiting for kernel memory to be available
+ * RVT_S_WAIT_PSN - waiting for a packet to exit the send DMA queue
+ * RVT_S_WAIT_ACK - waiting for an ACK packet before sending more requests
+ * RVT_S_SEND_ONE - send one packet, request ACK, then wait for ACK
+ * RVT_S_ECN - a BECN was queued to the send engine
+ * RVT_S_MAX_BIT_MASK - The max bit that can be used by rdmavt
+ */
+#define RVT_S_SIGNAL_REQ_WR 0x0001
+#define RVT_S_BUSY 0x0002
+#define RVT_S_TIMER 0x0004
+#define RVT_S_RESP_PENDING 0x0008
+#define RVT_S_ACK_PENDING 0x0010
+#define RVT_S_WAIT_FENCE 0x0020
+#define RVT_S_WAIT_RDMAR 0x0040
+#define RVT_S_WAIT_RNR 0x0080
+#define RVT_S_WAIT_SSN_CREDIT 0x0100
+#define RVT_S_WAIT_DMA 0x0200
+#define RVT_S_WAIT_PIO 0x0400
+#define RVT_S_WAIT_TX 0x0800
+#define RVT_S_WAIT_DMA_DESC 0x1000
+#define RVT_S_WAIT_KMEM 0x2000
+#define RVT_S_WAIT_PSN 0x4000
+#define RVT_S_WAIT_ACK 0x8000
+#define RVT_S_SEND_ONE 0x10000
+#define RVT_S_UNLIMITED_CREDIT 0x20000
+#define RVT_S_ECN 0x40000
+#define RVT_S_MAX_BIT_MASK 0x800000
+
+/*
+ * Drivers should use s_flags starting with bit 31 down to the bit next to
+ * RVT_S_MAX_BIT_MASK
+ */
+
+/*
+ * Wait flags that would prevent any packet type from being sent.
+ */
+#define RVT_S_ANY_WAIT_IO \
+ (RVT_S_WAIT_PIO | RVT_S_WAIT_TX | \
+ RVT_S_WAIT_DMA_DESC | RVT_S_WAIT_KMEM)
+
+/*
+ * Wait flags that would prevent send work requests from making progress.
+ */
+#define RVT_S_ANY_WAIT_SEND (RVT_S_WAIT_FENCE | RVT_S_WAIT_RDMAR | \
+ RVT_S_WAIT_RNR | RVT_S_WAIT_SSN_CREDIT | RVT_S_WAIT_DMA | \
+ RVT_S_WAIT_PSN | RVT_S_WAIT_ACK)
+
+#define RVT_S_ANY_WAIT (RVT_S_ANY_WAIT_IO | RVT_S_ANY_WAIT_SEND)
+
+/* Number of bits to pay attention to in the opcode for checking qp type */
+#define RVT_OPCODE_QP_MASK 0xE0
+
+/* Flags for checking QP state (see ib_rvt_state_ops[]) */
+#define RVT_POST_SEND_OK 0x01
+#define RVT_POST_RECV_OK 0x02
+#define RVT_PROCESS_RECV_OK 0x04
+#define RVT_PROCESS_SEND_OK 0x08
+#define RVT_PROCESS_NEXT_SEND_OK 0x10
+#define RVT_FLUSH_SEND 0x20
+#define RVT_FLUSH_RECV 0x40
+#define RVT_PROCESS_OR_FLUSH_SEND \
+ (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND)
+#define RVT_SEND_OR_FLUSH_OR_RECV_OK \
+ (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND | RVT_PROCESS_RECV_OK)
+
+/*
+ * Internal send flags
+ */
+#define RVT_SEND_RESERVE_USED IB_SEND_RESERVED_START
+#define RVT_SEND_COMPLETION_ONLY (IB_SEND_RESERVED_START << 1)
+
+/**
+ * rvt_ud_wr - IB UD work plus AH cache
+ * @wr: valid IB work request
+ * @attr: pointer to an allocated AH attribute
+ *
+ * Special case the UD WR so we can keep track of the AH attributes.
+ *
+ * NOTE: This data structure is stricly ordered wr then attr. I.e the attr
+ * MUST come after wr. The ib_ud_wr is sized and copied in rvt_post_one_wr.
+ * The copy assumes that wr is first.
+ */
+struct rvt_ud_wr {
+ struct ib_ud_wr wr;
+ struct rdma_ah_attr *attr;
+};
+
+/*
+ * Send work request queue entry.
+ * The size of the sg_list is determined when the QP is created and stored
+ * in qp->s_max_sge.
+ */
+struct rvt_swqe {
+ union {
+ struct ib_send_wr wr; /* don't use wr.sg_list */
+ struct rvt_ud_wr ud_wr;
+ struct ib_reg_wr reg_wr;
+ struct ib_rdma_wr rdma_wr;
+ struct ib_atomic_wr atomic_wr;
+ };
+ u32 psn; /* first packet sequence number */
+ u32 lpsn; /* last packet sequence number */
+ u32 ssn; /* send sequence number */
+ u32 length; /* total length of data in sg_list */
+ void *priv; /* driver dependent field */
+ struct rvt_sge sg_list[];
+};
+
+/**
+ * struct rvt_krwq - kernel struct receive work request
+ * @p_lock: lock to protect producer of the kernel buffer
+ * @head: index of next entry to fill
+ * @c_lock:lock to protect consumer of the kernel buffer
+ * @tail: index of next entry to pull
+ * @count: count is aproximate of total receive enteries posted
+ * @rvt_rwqe: struct of receive work request queue entry
+ *
+ * This structure is used to contain the head pointer,
+ * tail pointer and receive work queue entries for kernel
+ * mode user.
+ */
+struct rvt_krwq {
+ spinlock_t p_lock; /* protect producer */
+ u32 head; /* new work requests posted to the head */
+
+ /* protect consumer */
+ spinlock_t c_lock ____cacheline_aligned_in_smp;
+ u32 tail; /* receives pull requests from here. */
+ u32 count; /* approx count of receive entries posted */
+ struct rvt_rwqe *curr_wq;
+ struct rvt_rwqe wq[];
+};
+
+/*
+ * rvt_get_swqe_ah - Return the pointer to the struct rvt_ah
+ * @swqe: valid Send WQE
+ *
+ */
+static inline struct rvt_ah *rvt_get_swqe_ah(struct rvt_swqe *swqe)
+{
+ return ibah_to_rvtah(swqe->ud_wr.wr.ah);
+}
+
+/**
+ * rvt_get_swqe_ah_attr - Return the cached ah attribute information
+ * @swqe: valid Send WQE
+ *
+ */
+static inline struct rdma_ah_attr *rvt_get_swqe_ah_attr(struct rvt_swqe *swqe)
+{
+ return swqe->ud_wr.attr;
+}
+
+/**
+ * rvt_get_swqe_remote_qpn - Access the remote QPN value
+ * @swqe: valid Send WQE
+ *
+ */
+static inline u32 rvt_get_swqe_remote_qpn(struct rvt_swqe *swqe)
+{
+ return swqe->ud_wr.wr.remote_qpn;
+}
+
+/**
+ * rvt_get_swqe_remote_qkey - Acces the remote qkey value
+ * @swqe: valid Send WQE
+ *
+ */
+static inline u32 rvt_get_swqe_remote_qkey(struct rvt_swqe *swqe)
+{
+ return swqe->ud_wr.wr.remote_qkey;
+}
+
+/**
+ * rvt_get_swqe_pkey_index - Access the pkey index
+ * @swqe: valid Send WQE
+ *
+ */
+static inline u16 rvt_get_swqe_pkey_index(struct rvt_swqe *swqe)
+{
+ return swqe->ud_wr.wr.pkey_index;
+}
+
+struct rvt_rq {
+ struct rvt_rwq *wq;
+ struct rvt_krwq *kwq;
+ u32 size; /* size of RWQE array */
+ u8 max_sge;
+ /* protect changes in this struct */
+ spinlock_t lock ____cacheline_aligned_in_smp;
+};
+
+/**
+ * rvt_get_rq_count - count numbers of request work queue entries
+ * in circular buffer
+ * @rq: data structure for request queue entry
+ * @head: head indices of the circular buffer
+ * @tail: tail indices of the circular buffer
+ *
+ * Return - total number of entries in the Receive Queue
+ */
+
+static inline u32 rvt_get_rq_count(struct rvt_rq *rq, u32 head, u32 tail)
+{
+ u32 count = head - tail;
+
+ if ((s32)count < 0)
+ count += rq->size;
+ return count;
+}
+
+/*
+ * This structure holds the information that the send tasklet needs
+ * to send a RDMA read response or atomic operation.
+ */
+struct rvt_ack_entry {
+ struct rvt_sge rdma_sge;
+ u64 atomic_data;
+ u32 psn;
+ u32 lpsn;
+ u8 opcode;
+ u8 sent;
+ void *priv;
+};
+
+#define RC_QP_SCALING_INTERVAL 5
+
+#define RVT_OPERATION_PRIV 0x00000001
+#define RVT_OPERATION_ATOMIC 0x00000002
+#define RVT_OPERATION_ATOMIC_SGE 0x00000004
+#define RVT_OPERATION_LOCAL 0x00000008
+#define RVT_OPERATION_USE_RESERVE 0x00000010
+#define RVT_OPERATION_IGN_RNR_CNT 0x00000020
+
+#define RVT_OPERATION_MAX (IB_WR_RESERVED10 + 1)
+
+/**
+ * rvt_operation_params - op table entry
+ * @length - the length to copy into the swqe entry
+ * @qpt_support - a bit mask indicating QP type support
+ * @flags - RVT_OPERATION flags (see above)
+ *
+ * This supports table driven post send so that
+ * the driver can have differing an potentially
+ * different sets of operations.
+ *
+ **/
+
+struct rvt_operation_params {
+ size_t length;
+ u32 qpt_support;
+ u32 flags;
+};
+
+/*
+ * Common variables are protected by both r_rq.lock and s_lock in that order
+ * which only happens in modify_qp() or changing the QP 'state'.
+ */
+struct rvt_qp {
+ struct ib_qp ibqp;
+ void *priv; /* Driver private data */
+ /* read mostly fields above and below */
+ struct rdma_ah_attr remote_ah_attr;
+ struct rdma_ah_attr alt_ah_attr;
+ struct rvt_qp __rcu *next; /* link list for QPN hash table */
+ struct rvt_swqe *s_wq; /* send work queue */
+ struct rvt_mmap_info *ip;
+
+ unsigned long timeout_jiffies; /* computed from timeout */
+
+ int srate_mbps; /* s_srate (below) converted to Mbit/s */
+ pid_t pid; /* pid for user mode QPs */
+ u32 remote_qpn;
+ u32 qkey; /* QKEY for this QP (for UD or RD) */
+ u32 s_size; /* send work queue size */
+
+ u16 pmtu; /* decoded from path_mtu */
+ u8 log_pmtu; /* shift for pmtu */
+ u8 state; /* QP state */
+ u8 allowed_ops; /* high order bits of allowed opcodes */
+ u8 qp_access_flags;
+ u8 alt_timeout; /* Alternate path timeout for this QP */
+ u8 timeout; /* Timeout for this QP */
+ u8 s_srate;
+ u8 s_mig_state;
+ u8 port_num;
+ u8 s_pkey_index; /* PKEY index to use */
+ u8 s_alt_pkey_index; /* Alternate path PKEY index to use */
+ u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
+ u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
+ u8 s_retry_cnt; /* number of times to retry */
+ u8 s_rnr_retry_cnt;
+ u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
+ u8 s_max_sge; /* size of s_wq->sg_list */
+ u8 s_draining;
+
+ /* start of read/write fields */
+ atomic_t refcount ____cacheline_aligned_in_smp;
+ wait_queue_head_t wait;
+
+ struct rvt_ack_entry *s_ack_queue;
+ struct rvt_sge_state s_rdma_read_sge;
+
+ spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */
+ u32 r_psn; /* expected rcv packet sequence number */
+ unsigned long r_aflags;
+ u64 r_wr_id; /* ID for current receive WQE */
+ u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
+ u32 r_len; /* total length of r_sge */
+ u32 r_rcv_len; /* receive data len processed */
+ u32 r_msn; /* message sequence number */
+
+ u8 r_state; /* opcode of last packet received */
+ u8 r_flags;
+ u8 r_head_ack_queue; /* index into s_ack_queue[] */
+ u8 r_adefered; /* defered ack count */
+
+ struct list_head rspwait; /* link for waiting to respond */
+
+ struct rvt_sge_state r_sge; /* current receive data */
+ struct rvt_rq r_rq; /* receive work queue */
+
+ /* post send line */
+ spinlock_t s_hlock ____cacheline_aligned_in_smp;
+ u32 s_head; /* new entries added here */
+ u32 s_next_psn; /* PSN for next request */
+ u32 s_avail; /* number of entries avail */
+ u32 s_ssn; /* SSN of tail entry */
+ atomic_t s_reserved_used; /* reserved entries in use */
+
+ spinlock_t s_lock ____cacheline_aligned_in_smp;
+ u32 s_flags;
+ struct rvt_sge_state *s_cur_sge;
+ struct rvt_swqe *s_wqe;
+ struct rvt_sge_state s_sge; /* current send request data */
+ struct rvt_mregion *s_rdma_mr;
+ u32 s_len; /* total length of s_sge */
+ u32 s_rdma_read_len; /* total length of s_rdma_read_sge */
+ u32 s_last_psn; /* last response PSN processed */
+ u32 s_sending_psn; /* lowest PSN that is being sent */
+ u32 s_sending_hpsn; /* highest PSN that is being sent */
+ u32 s_psn; /* current packet sequence number */
+ u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */
+ u32 s_ack_psn; /* PSN for acking sends and RDMA writes */
+ u32 s_tail; /* next entry to process */
+ u32 s_cur; /* current work queue entry */
+ u32 s_acked; /* last un-ACK'ed entry */
+ u32 s_last; /* last completed entry */
+ u32 s_lsn; /* limit sequence number (credit) */
+ u32 s_ahgpsn; /* set to the psn in the copy of the header */
+ u16 s_cur_size; /* size of send packet in bytes */
+ u16 s_rdma_ack_cnt;
+ u8 s_hdrwords; /* size of s_hdr in 32 bit words */
+ s8 s_ahgidx;
+ u8 s_state; /* opcode of last packet sent */
+ u8 s_ack_state; /* opcode of packet to ACK */
+ u8 s_nak_state; /* non-zero if NAK is pending */
+ u8 r_nak_state; /* non-zero if NAK is pending */
+ u8 s_retry; /* requester retry counter */
+ u8 s_rnr_retry; /* requester RNR retry counter */
+ u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
+ u8 s_tail_ack_queue; /* index into s_ack_queue[] */
+ u8 s_acked_ack_queue; /* index into s_ack_queue[] */
+
+ struct rvt_sge_state s_ack_rdma_sge;
+ struct timer_list s_timer;
+ struct hrtimer s_rnr_timer;
+
+ atomic_t local_ops_pending; /* number of fast_reg/local_inv reqs */
+
+ /*
+ * This sge list MUST be last. Do not add anything below here.
+ */
+ struct rvt_sge *r_sg_list /* verified SGEs */
+ ____cacheline_aligned_in_smp;
+};
+
+struct rvt_srq {
+ struct ib_srq ibsrq;
+ struct rvt_rq rq;
+ struct rvt_mmap_info *ip;
+ /* send signal when number of RWQEs < limit */
+ u32 limit;
+};
+
+static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq)
+{
+ return container_of(ibsrq, struct rvt_srq, ibsrq);
+}
+
+static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp)
+{
+ return container_of(ibqp, struct rvt_qp, ibqp);
+}
+
+#define RVT_QPN_MAX BIT(24)
+#define RVT_QPNMAP_ENTRIES (RVT_QPN_MAX / PAGE_SIZE / BITS_PER_BYTE)
+#define RVT_BITS_PER_PAGE (PAGE_SIZE * BITS_PER_BYTE)
+#define RVT_BITS_PER_PAGE_MASK (RVT_BITS_PER_PAGE - 1)
+#define RVT_QPN_MASK IB_QPN_MASK
+
+/*
+ * QPN-map pages start out as NULL, they get allocated upon
+ * first use and are never deallocated. This way,
+ * large bitmaps are not allocated unless large numbers of QPs are used.
+ */
+struct rvt_qpn_map {
+ void *page;
+};
+
+struct rvt_qpn_table {
+ spinlock_t lock; /* protect changes to the qp table */
+ unsigned flags; /* flags for QP0/1 allocated for each port */
+ u32 last; /* last QP number allocated */
+ u32 nmaps; /* size of the map table */
+ u16 limit;
+ u8 incr;
+ /* bit map of free QP numbers other than 0/1 */
+ struct rvt_qpn_map map[RVT_QPNMAP_ENTRIES];
+};
+
+struct rvt_qp_ibdev {
+ u32 qp_table_size;
+ u32 qp_table_bits;
+ struct rvt_qp __rcu **qp_table;
+ spinlock_t qpt_lock; /* qptable lock */
+ struct rvt_qpn_table qpn_table;
+};
+
+/*
+ * There is one struct rvt_mcast for each multicast GID.
+ * All attached QPs are then stored as a list of
+ * struct rvt_mcast_qp.
+ */
+struct rvt_mcast_qp {
+ struct list_head list;
+ struct rvt_qp *qp;
+};
+
+struct rvt_mcast_addr {
+ union ib_gid mgid;
+ u16 lid;
+};
+
+struct rvt_mcast {
+ struct rb_node rb_node;
+ struct rvt_mcast_addr mcast_addr;
+ struct list_head qp_list;
+ wait_queue_head_t wait;
+ atomic_t refcount;
+ int n_attached;
+};
+
+/*
+ * Since struct rvt_swqe is not a fixed size, we can't simply index into
+ * struct rvt_qp.s_wq. This function does the array index computation.
+ */
+static inline struct rvt_swqe *rvt_get_swqe_ptr(struct rvt_qp *qp,
+ unsigned n)
+{
+ return (struct rvt_swqe *)((char *)qp->s_wq +
+ (sizeof(struct rvt_swqe) +
+ qp->s_max_sge *
+ sizeof(struct rvt_sge)) * n);
+}
+
+/*
+ * Since struct rvt_rwqe is not a fixed size, we can't simply index into
+ * struct rvt_rwq.wq. This function does the array index computation.
+ */
+static inline struct rvt_rwqe *rvt_get_rwqe_ptr(struct rvt_rq *rq, unsigned n)
+{
+ return (struct rvt_rwqe *)
+ ((char *)rq->kwq->curr_wq +
+ (sizeof(struct rvt_rwqe) +
+ rq->max_sge * sizeof(struct ib_sge)) * n);
+}
+
+/**
+ * rvt_is_user_qp - return if this is user mode QP
+ * @qp - the target QP
+ */
+static inline bool rvt_is_user_qp(struct rvt_qp *qp)
+{
+ return !!qp->pid;
+}
+
+/**
+ * rvt_get_qp - get a QP reference
+ * @qp - the QP to hold
+ */
+static inline void rvt_get_qp(struct rvt_qp *qp)
+{
+ atomic_inc(&qp->refcount);
+}
+
+/**
+ * rvt_put_qp - release a QP reference
+ * @qp - the QP to release
+ */
+static inline void rvt_put_qp(struct rvt_qp *qp)
+{
+ if (qp && atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+}
+
+/**
+ * rvt_put_swqe - drop mr refs held by swqe
+ * @wqe - the send wqe
+ *
+ * This drops any mr references held by the swqe
+ */
+static inline void rvt_put_swqe(struct rvt_swqe *wqe)
+{
+ int i;
+
+ for (i = 0; i < wqe->wr.num_sge; i++) {
+ struct rvt_sge *sge = &wqe->sg_list[i];
+
+ rvt_put_mr(sge->mr);
+ }
+}
+
+/**
+ * rvt_qp_wqe_reserve - reserve operation
+ * @qp - the rvt qp
+ * @wqe - the send wqe
+ *
+ * This routine used in post send to record
+ * a wqe relative reserved operation use.
+ */
+static inline void rvt_qp_wqe_reserve(
+ struct rvt_qp *qp,
+ struct rvt_swqe *wqe)
+{
+ atomic_inc(&qp->s_reserved_used);
+}
+
+/**
+ * rvt_qp_wqe_unreserve - clean reserved operation
+ * @qp - the rvt qp
+ * @flags - send wqe flags
+ *
+ * This decrements the reserve use count.
+ *
+ * This call MUST precede the change to
+ * s_last to insure that post send sees a stable
+ * s_avail.
+ *
+ * An smp_mp__after_atomic() is used to insure
+ * the compiler does not juggle the order of the s_last
+ * ring index and the decrementing of s_reserved_used.
+ */
+static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags)
+{
+ if (unlikely(flags & RVT_SEND_RESERVE_USED)) {
+ atomic_dec(&qp->s_reserved_used);
+ /* insure no compiler re-order up to s_last change */
+ smp_mb__after_atomic();
+ }
+}
+
+extern const enum ib_wc_opcode ib_rvt_wc_opcode[];
+
+/*
+ * Compare the lower 24 bits of the msn values.
+ * Returns an integer <, ==, or > than zero.
+ */
+static inline int rvt_cmp_msn(u32 a, u32 b)
+{
+ return (((int)a) - ((int)b)) << 8;
+}
+
+__be32 rvt_compute_aeth(struct rvt_qp *qp);
+
+void rvt_get_credit(struct rvt_qp *qp, u32 aeth);
+
+u32 rvt_restart_sge(struct rvt_sge_state *ss, struct rvt_swqe *wqe, u32 len);
+
+/**
+ * rvt_div_round_up_mtu - round up divide
+ * @qp - the qp pair
+ * @len - the length
+ *
+ * Perform a shift based mtu round up divide
+ */
+static inline u32 rvt_div_round_up_mtu(struct rvt_qp *qp, u32 len)
+{
+ return (len + qp->pmtu - 1) >> qp->log_pmtu;
+}
+
+/**
+ * @qp - the qp pair
+ * @len - the length
+ *
+ * Perform a shift based mtu divide
+ */
+static inline u32 rvt_div_mtu(struct rvt_qp *qp, u32 len)
+{
+ return len >> qp->log_pmtu;
+}
+
+/**
+ * rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies
+ * @timeout - timeout input(0 - 31).
+ *
+ * Return a timeout value in jiffies.
+ */
+static inline unsigned long rvt_timeout_to_jiffies(u8 timeout)
+{
+ if (timeout > 31)
+ timeout = 31;
+
+ return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL;
+}
+
+/**
+ * rvt_lookup_qpn - return the QP with the given QPN
+ * @ibp: the ibport
+ * @qpn: the QP number to look up
+ *
+ * The caller must hold the rcu_read_lock(), and keep the lock until
+ * the returned qp is no longer in use.
+ */
+static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi,
+ struct rvt_ibport *rvp,
+ u32 qpn) __must_hold(RCU)
+{
+ struct rvt_qp *qp = NULL;
+
+ if (unlikely(qpn <= 1)) {
+ qp = rcu_dereference(rvp->qp[qpn]);
+ } else {
+ u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits);
+
+ for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp;
+ qp = rcu_dereference(qp->next))
+ if (qp->ibqp.qp_num == qpn)
+ break;
+ }
+ return qp;
+}
+
+/**
+ * rvt_mod_retry_timer - mod a retry timer
+ * @qp - the QP
+ * @shift - timeout shift to wait for multiple packets
+ * Modify a potentially already running retry timer
+ */
+static inline void rvt_mod_retry_timer_ext(struct rvt_qp *qp, u8 shift)
+{
+ struct ib_qp *ibqp = &qp->ibqp;
+ struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device);
+
+ lockdep_assert_held(&qp->s_lock);
+ qp->s_flags |= RVT_S_TIMER;
+ /* 4.096 usec. * (1 << qp->timeout) */
+ mod_timer(&qp->s_timer, jiffies + rdi->busy_jiffies +
+ (qp->timeout_jiffies << shift));
+}
+
+static inline void rvt_mod_retry_timer(struct rvt_qp *qp)
+{
+ return rvt_mod_retry_timer_ext(qp, 0);
+}
+
+/**
+ * rvt_put_qp_swqe - drop refs held by swqe
+ * @qp: the send qp
+ * @wqe: the send wqe
+ *
+ * This drops any references held by the swqe
+ */
+static inline void rvt_put_qp_swqe(struct rvt_qp *qp, struct rvt_swqe *wqe)
+{
+ rvt_put_swqe(wqe);
+ if (qp->allowed_ops == IB_OPCODE_UD)
+ rdma_destroy_ah_attr(wqe->ud_wr.attr);
+}
+
+/**
+ * rvt_qp_sqwe_incr - increment ring index
+ * @qp: the qp
+ * @val: the starting value
+ *
+ * Return: the new value wrapping as appropriate
+ */
+static inline u32
+rvt_qp_swqe_incr(struct rvt_qp *qp, u32 val)
+{
+ if (++val >= qp->s_size)
+ val = 0;
+ return val;
+}
+
+int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err);
+
+/**
+ * rvt_recv_cq - add a new entry to completion queue
+ * by receive queue
+ * @qp: receive queue
+ * @wc: work completion entry to add
+ * @solicited: true if @entry is solicited
+ *
+ * This is wrapper function for rvt_enter_cq function call by
+ * receive queue. If rvt_cq_enter return false, it means cq is
+ * full and the qp is put into error state.
+ */
+static inline void rvt_recv_cq(struct rvt_qp *qp, struct ib_wc *wc,
+ bool solicited)
+{
+ struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.recv_cq);
+
+ if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
+ rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
+}
+
+/**
+ * rvt_send_cq - add a new entry to completion queue
+ * by send queue
+ * @qp: send queue
+ * @wc: work completion entry to add
+ * @solicited: true if @entry is solicited
+ *
+ * This is wrapper function for rvt_enter_cq function call by
+ * send queue. If rvt_cq_enter return false, it means cq is
+ * full and the qp is put into error state.
+ */
+static inline void rvt_send_cq(struct rvt_qp *qp, struct ib_wc *wc,
+ bool solicited)
+{
+ struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.send_cq);
+
+ if (unlikely(!rvt_cq_enter(cq, wc, solicited)))
+ rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR);
+}
+
+/**
+ * rvt_qp_complete_swqe - insert send completion
+ * @qp - the qp
+ * @wqe - the send wqe
+ * @opcode - wc operation (driver dependent)
+ * @status - completion status
+ *
+ * Update the s_last information, and then insert a send
+ * completion into the completion
+ * queue if the qp indicates it should be done.
+ *
+ * See IBTA 10.7.3.1 for info on completion
+ * control.
+ *
+ * Return: new last
+ */
+static inline u32
+rvt_qp_complete_swqe(struct rvt_qp *qp,
+ struct rvt_swqe *wqe,
+ enum ib_wc_opcode opcode,
+ enum ib_wc_status status)
+{
+ bool need_completion;
+ u64 wr_id;
+ u32 byte_len, last;
+ int flags = wqe->wr.send_flags;
+
+ rvt_qp_wqe_unreserve(qp, flags);
+ rvt_put_qp_swqe(qp, wqe);
+
+ need_completion =
+ !(flags & RVT_SEND_RESERVE_USED) &&
+ (!(qp->s_flags & RVT_S_SIGNAL_REQ_WR) ||
+ (flags & IB_SEND_SIGNALED) ||
+ status != IB_WC_SUCCESS);
+ if (need_completion) {
+ wr_id = wqe->wr.wr_id;
+ byte_len = wqe->length;
+ /* above fields required before writing s_last */
+ }
+ last = rvt_qp_swqe_incr(qp, qp->s_last);
+ /* see rvt_qp_is_avail() */
+ smp_store_release(&qp->s_last, last);
+ if (need_completion) {
+ struct ib_wc w = {
+ .wr_id = wr_id,
+ .status = status,
+ .opcode = opcode,
+ .qp = &qp->ibqp,
+ .byte_len = byte_len,
+ };
+ rvt_send_cq(qp, &w, status != IB_WC_SUCCESS);
+ }
+ return last;
+}
+
+extern const int ib_rvt_state_ops[];
+
+struct rvt_dev_info;
+int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only);
+void rvt_comm_est(struct rvt_qp *qp);
+void rvt_rc_error(struct rvt_qp *qp, enum ib_wc_status err);
+unsigned long rvt_rnr_tbl_to_usec(u32 index);
+enum hrtimer_restart rvt_rc_rnr_retry(struct hrtimer *t);
+void rvt_add_rnr_timer(struct rvt_qp *qp, u32 aeth);
+void rvt_del_timers_sync(struct rvt_qp *qp);
+void rvt_stop_rc_timers(struct rvt_qp *qp);
+void rvt_add_retry_timer_ext(struct rvt_qp *qp, u8 shift);
+static inline void rvt_add_retry_timer(struct rvt_qp *qp)
+{
+ rvt_add_retry_timer_ext(qp, 0);
+}
+
+void rvt_copy_sge(struct rvt_qp *qp, struct rvt_sge_state *ss,
+ void *data, u32 length,
+ bool release, bool copy_last);
+void rvt_send_complete(struct rvt_qp *qp, struct rvt_swqe *wqe,
+ enum ib_wc_status status);
+void rvt_ruc_loopback(struct rvt_qp *qp);
+
+/**
+ * struct rvt_qp_iter - the iterator for QPs
+ * @qp - the current QP
+ *
+ * This structure defines the current iterator
+ * state for sequenced access to all QPs relative
+ * to an rvt_dev_info.
+ */
+struct rvt_qp_iter {
+ struct rvt_qp *qp;
+ /* private: backpointer */
+ struct rvt_dev_info *rdi;
+ /* private: callback routine */
+ void (*cb)(struct rvt_qp *qp, u64 v);
+ /* private: for arg to callback routine */
+ u64 v;
+ /* private: number of SMI,GSI QPs for device */
+ int specials;
+ /* private: current iterator index */
+ int n;
+};
+
+/**
+ * ib_cq_tail - Return tail index of cq buffer
+ * @send_cq - The cq for send
+ *
+ * This is called in qp_iter_print to get tail
+ * of cq buffer.
+ */
+static inline u32 ib_cq_tail(struct ib_cq *send_cq)
+{
+ struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
+
+ return ibcq_to_rvtcq(send_cq)->ip ?
+ RDMA_READ_UAPI_ATOMIC(cq->queue->tail) :
+ ibcq_to_rvtcq(send_cq)->kqueue->tail;
+}
+
+/**
+ * ib_cq_head - Return head index of cq buffer
+ * @send_cq - The cq for send
+ *
+ * This is called in qp_iter_print to get head
+ * of cq buffer.
+ */
+static inline u32 ib_cq_head(struct ib_cq *send_cq)
+{
+ struct rvt_cq *cq = ibcq_to_rvtcq(send_cq);
+
+ return ibcq_to_rvtcq(send_cq)->ip ?
+ RDMA_READ_UAPI_ATOMIC(cq->queue->head) :
+ ibcq_to_rvtcq(send_cq)->kqueue->head;
+}
+
+/**
+ * rvt_free_rq - free memory allocated for rvt_rq struct
+ * @rvt_rq: request queue data structure
+ *
+ * This function should only be called if the rvt_mmap_info()
+ * has not succeeded.
+ */
+static inline void rvt_free_rq(struct rvt_rq *rq)
+{
+ kvfree(rq->kwq);
+ rq->kwq = NULL;
+ vfree(rq->wq);
+ rq->wq = NULL;
+}
+
+/**
+ * rvt_to_iport - Get the ibport pointer
+ * @qp: the qp pointer
+ *
+ * This function returns the ibport pointer from the qp pointer.
+ */
+static inline struct rvt_ibport *rvt_to_iport(struct rvt_qp *qp)
+{
+ struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device);
+
+ return rdi->ports[qp->port_num - 1];
+}
+
+/**
+ * rvt_rc_credit_avail - Check if there are enough RC credits for the request
+ * @qp: the qp
+ * @wqe: the request
+ *
+ * This function returns false when there are not enough credits for the given
+ * request and true otherwise.
+ */
+static inline bool rvt_rc_credit_avail(struct rvt_qp *qp, struct rvt_swqe *wqe)
+{
+ lockdep_assert_held(&qp->s_lock);
+ if (!(qp->s_flags & RVT_S_UNLIMITED_CREDIT) &&
+ rvt_cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) {
+ struct rvt_ibport *rvp = rvt_to_iport(qp);
+
+ qp->s_flags |= RVT_S_WAIT_SSN_CREDIT;
+ rvp->n_rc_crwaits++;
+ return false;
+ }
+ return true;
+}
+
+struct rvt_qp_iter *rvt_qp_iter_init(struct rvt_dev_info *rdi,
+ u64 v,
+ void (*cb)(struct rvt_qp *qp, u64 v));
+int rvt_qp_iter_next(struct rvt_qp_iter *iter);
+void rvt_qp_iter(struct rvt_dev_info *rdi,
+ u64 v,
+ void (*cb)(struct rvt_qp *qp, u64 v));
+void rvt_qp_mr_clean(struct rvt_qp *qp, u32 lkey);
+#endif /* DEF_RDMAVT_INCQP_H */