diff options
Diffstat (limited to 'include/uapi/linux/ipmi.h')
| -rw-r--r-- | include/uapi/linux/ipmi.h | 443 |
1 files changed, 443 insertions, 0 deletions
diff --git a/include/uapi/linux/ipmi.h b/include/uapi/linux/ipmi.h new file mode 100644 index 000000000..966c30709 --- /dev/null +++ b/include/uapi/linux/ipmi.h @@ -0,0 +1,443 @@ +/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ +/* + * ipmi.h + * + * MontaVista IPMI interface + * + * Author: MontaVista Software, Inc. + * Corey Minyard <minyard@mvista.com> + * source@mvista.com + * + * Copyright 2002 MontaVista Software Inc. + * + */ + +#ifndef _UAPI__LINUX_IPMI_H +#define _UAPI__LINUX_IPMI_H + +#include <linux/ipmi_msgdefs.h> +#include <linux/compiler.h> + +/* + * This file describes an interface to an IPMI driver. You have to + * have a fairly good understanding of IPMI to use this, so go read + * the specs first before actually trying to do anything. + * + * With that said, this driver provides a multi-user interface to the + * IPMI driver, and it allows multiple IPMI physical interfaces below + * the driver. The physical interfaces bind as a lower layer on the + * driver. They appear as interfaces to the application using this + * interface. + * + * Multi-user means that multiple applications may use the driver, + * send commands, receive responses, etc. The driver keeps track of + * commands the user sends and tracks the responses. The responses + * will go back to the application that send the command. If the + * response doesn't come back in time, the driver will return a + * timeout error response to the application. Asynchronous events + * from the BMC event queue will go to all users bound to the driver. + * The incoming event queue in the BMC will automatically be flushed + * if it becomes full and it is queried once a second to see if + * anything is in it. Incoming commands to the driver will get + * delivered as commands. + */ + +/* + * This is an overlay for all the address types, so it's easy to + * determine the actual address type. This is kind of like addresses + * work for sockets. + */ +#define IPMI_MAX_ADDR_SIZE 32 +struct ipmi_addr { + /* Try to take these from the "Channel Medium Type" table + in section 6.5 of the IPMI 1.5 manual. */ + int addr_type; + short channel; + char data[IPMI_MAX_ADDR_SIZE]; +}; + +/* + * When the address is not used, the type will be set to this value. + * The channel is the BMC's channel number for the channel (usually + * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC. + */ +#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c +struct ipmi_system_interface_addr { + int addr_type; + short channel; + unsigned char lun; +}; + +/* An IPMB Address. */ +#define IPMI_IPMB_ADDR_TYPE 0x01 +/* Used for broadcast get device id as described in section 17.9 of the + IPMI 1.5 manual. */ +#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41 +struct ipmi_ipmb_addr { + int addr_type; + short channel; + unsigned char slave_addr; + unsigned char lun; +}; + +/* + * Used for messages received directly from an IPMB that have not gone + * through a MC. This is for systems that sit right on an IPMB so + * they can receive commands and respond to them. + */ +#define IPMI_IPMB_DIRECT_ADDR_TYPE 0x81 +struct ipmi_ipmb_direct_addr { + int addr_type; + short channel; + unsigned char slave_addr; + unsigned char rs_lun; + unsigned char rq_lun; +}; + +/* + * A LAN Address. This is an address to/from a LAN interface bridged + * by the BMC, not an address actually out on the LAN. + * + * A conscious decision was made here to deviate slightly from the IPMI + * spec. We do not use rqSWID and rsSWID like it shows in the + * message. Instead, we use remote_SWID and local_SWID. This means + * that any message (a request or response) from another device will + * always have exactly the same address. If you didn't do this, + * requests and responses from the same device would have different + * addresses, and that's not too cool. + * + * In this address, the remote_SWID is always the SWID the remote + * message came from, or the SWID we are sending the message to. + * local_SWID is always our SWID. Note that having our SWID in the + * message is a little weird, but this is required. + */ +#define IPMI_LAN_ADDR_TYPE 0x04 +struct ipmi_lan_addr { + int addr_type; + short channel; + unsigned char privilege; + unsigned char session_handle; + unsigned char remote_SWID; + unsigned char local_SWID; + unsigned char lun; +}; + + +/* + * Channel for talking directly with the BMC. When using this + * channel, This is for the system interface address type only. FIXME + * - is this right, or should we use -1? + */ +#define IPMI_BMC_CHANNEL 0xf +#define IPMI_NUM_CHANNELS 0x10 + +/* + * Used to signify an "all channel" bitmask. This is more than the + * actual number of channels because this is used in userland and + * will cover us if the number of channels is extended. + */ +#define IPMI_CHAN_ALL (~0) + + +/* + * A raw IPMI message without any addressing. This covers both + * commands and responses. The completion code is always the first + * byte of data in the response (as the spec shows the messages laid + * out). + */ +struct ipmi_msg { + unsigned char netfn; + unsigned char cmd; + unsigned short data_len; + unsigned char __user *data; +}; + +struct kernel_ipmi_msg { + unsigned char netfn; + unsigned char cmd; + unsigned short data_len; + unsigned char *data; +}; + +/* + * Various defines that are useful for IPMI applications. + */ +#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1 +#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3 +#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff + + +/* + * Receive types for messages coming from the receive interface. This + * is used for the receive in-kernel interface and in the receive + * IOCTL. + * + * The "IPMI_RESPONSE_RESPONSE_TYPE" is a little strange sounding, but + * it allows you to get the message results when you send a response + * message. + */ +#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */ +#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */ +#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */ +#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for + a sent response, giving any + error status for sending the + response. When you send a + response message, this will + be returned. */ +#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ + +/* Note that async events and received commands do not have a completion + code as the first byte of the incoming data, unlike a response. */ + + +/* + * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO + * setting is the default and means it will be set on certain + * commands. Hard setting it on and off will override automatic + * operation. + */ +#define IPMI_MAINTENANCE_MODE_AUTO 0 +#define IPMI_MAINTENANCE_MODE_OFF 1 +#define IPMI_MAINTENANCE_MODE_ON 2 + + + +/* + * The userland interface + */ + +/* + * The userland interface for the IPMI driver is a standard character + * device, with each instance of an interface registered as a minor + * number under the major character device. + * + * The read and write calls do not work, to get messages in and out + * requires ioctl calls because of the complexity of the data. select + * and poll do work, so you can wait for input using the file + * descriptor, you just can use read to get it. + * + * In general, you send a command down to the interface and receive + * responses back. You can use the msgid value to correlate commands + * and responses, the driver will take care of figuring out which + * incoming messages are for which command and find the proper msgid + * value to report. You will only receive reponses for commands you + * send. Asynchronous events, however, go to all open users, so you + * must be ready to handle these (or ignore them if you don't care). + * + * The address type depends upon the channel type. When talking + * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored + * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must + * supply a valid IPMB address with the addr_type set properly. + * + * When talking to normal channels, the driver takes care of the + * details of formatting and sending messages on that channel. You do + * not, for instance, have to format a send command, you just send + * whatever command you want to the channel, the driver will create + * the send command, automatically issue receive command and get even + * commands, and pass those up to the proper user. + */ + + +/* The magic IOCTL value for this interface. */ +#define IPMI_IOC_MAGIC 'i' + + +/* Messages sent to the interface are this format. */ +struct ipmi_req { + unsigned char __user *addr; /* Address to send the message to. */ + unsigned int addr_len; + + long msgid; /* The sequence number for the message. This + exact value will be reported back in the + response to this request if it is a command. + If it is a response, this will be used as + the sequence value for the response. */ + + struct ipmi_msg msg; +}; +/* + * Send a message to the interfaces. error values are: + * - EFAULT - an address supplied was invalid. + * - EINVAL - The address supplied was not valid, or the command + * was not allowed. + * - EMSGSIZE - The message to was too large. + * - ENOMEM - Buffers could not be allocated for the command. + */ +#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \ + struct ipmi_req) + +/* Messages sent to the interface with timing parameters are this + format. */ +struct ipmi_req_settime { + struct ipmi_req req; + + /* See ipmi_request_settime() above for details on these + values. */ + int retries; + unsigned int retry_time_ms; +}; +/* + * Send a message to the interfaces with timing parameters. error values + * are: + * - EFAULT - an address supplied was invalid. + * - EINVAL - The address supplied was not valid, or the command + * was not allowed. + * - EMSGSIZE - The message to was too large. + * - ENOMEM - Buffers could not be allocated for the command. + */ +#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \ + struct ipmi_req_settime) + +/* Messages received from the interface are this format. */ +struct ipmi_recv { + int recv_type; /* Is this a command, response or an + asyncronous event. */ + + unsigned char __user *addr; /* Address the message was from is put + here. The caller must supply the + memory. */ + unsigned int addr_len; /* The size of the address buffer. + The caller supplies the full buffer + length, this value is updated to + the actual message length when the + message is received. */ + + long msgid; /* The sequence number specified in the request + if this is a response. If this is a command, + this will be the sequence number from the + command. */ + + struct ipmi_msg msg; /* The data field must point to a buffer. + The data_size field must be set to the + size of the message buffer. The + caller supplies the full buffer + length, this value is updated to the + actual message length when the message + is received. */ +}; + +/* + * Receive a message. error values: + * - EAGAIN - no messages in the queue. + * - EFAULT - an address supplied was invalid. + * - EINVAL - The address supplied was not valid. + * - EMSGSIZE - The message to was too large to fit into the message buffer, + * the message will be left in the buffer. */ +#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \ + struct ipmi_recv) + +/* + * Like RECEIVE_MSG, but if the message won't fit in the buffer, it + * will truncate the contents instead of leaving the data in the + * buffer. + */ +#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \ + struct ipmi_recv) + +/* Register to get commands from other entities on this interface. */ +struct ipmi_cmdspec { + unsigned char netfn; + unsigned char cmd; +}; + +/* + * Register to receive a specific command. error values: + * - EFAULT - an address supplied was invalid. + * - EBUSY - The netfn/cmd supplied was already in use. + * - ENOMEM - could not allocate memory for the entry. + */ +#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \ + struct ipmi_cmdspec) +/* + * Unregister a registered command. error values: + * - EFAULT - an address supplied was invalid. + * - ENOENT - The netfn/cmd was not found registered for this user. + */ +#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \ + struct ipmi_cmdspec) + +/* + * Register to get commands from other entities on specific channels. + * This way, you can only listen on specific channels, or have messages + * from some channels go to one place and other channels to someplace + * else. The chans field is a bitmask, (1 << channel) for each channel. + * It may be IPMI_CHAN_ALL for all channels. + */ +struct ipmi_cmdspec_chans { + unsigned int netfn; + unsigned int cmd; + unsigned int chans; +}; + +/* + * Register to receive a specific command on specific channels. error values: + * - EFAULT - an address supplied was invalid. + * - EBUSY - One of the netfn/cmd/chans supplied was already in use. + * - ENOMEM - could not allocate memory for the entry. + */ +#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \ + struct ipmi_cmdspec_chans) +/* + * Unregister some netfn/cmd/chans. error values: + * - EFAULT - an address supplied was invalid. + * - ENOENT - None of the netfn/cmd/chans were found registered for this user. + */ +#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \ + struct ipmi_cmdspec_chans) + +/* + * Set whether this interface receives events. Note that the first + * user registered for events will get all pending events for the + * interface. error values: + * - EFAULT - an address supplied was invalid. + */ +#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int) + +/* + * Set and get the slave address and LUN that we will use for our + * source messages. Note that this affects the interface, not just + * this user, so it will affect all users of this interface. This is + * so some initialization code can come in and do the OEM-specific + * things it takes to determine your address (if not the BMC) and set + * it for everyone else. You should probably leave the LUN alone. + */ +struct ipmi_channel_lun_address_set { + unsigned short channel; + unsigned char value; +}; +#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \ + _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set) +#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \ + _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set) +#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \ + _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set) +#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \ + _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set) +/* Legacy interfaces, these only set IPMB 0. */ +#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int) +#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int) +#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int) +#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int) + +/* + * Get/set the default timing values for an interface. You shouldn't + * generally mess with these. + */ +struct ipmi_timing_parms { + int retries; + unsigned int retry_time_ms; +}; +#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \ + struct ipmi_timing_parms) +#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ + struct ipmi_timing_parms) + +/* + * Set the maintenance mode. See ipmi_set_maintenance_mode() above + * for a description of what this does. + */ +#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) +#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) + +#endif /* _UAPI__LINUX_IPMI_H */ |