summaryrefslogtreecommitdiffstats
path: root/include/ufs
diff options
context:
space:
mode:
Diffstat (limited to 'include/ufs')
-rw-r--r--include/ufs/ufs.h623
-rw-r--r--include/ufs/ufs_quirks.h116
-rw-r--r--include/ufs/ufshcd.h1243
-rw-r--r--include/ufs/ufshci.h506
-rw-r--r--include/ufs/unipro.h316
5 files changed, 2804 insertions, 0 deletions
diff --git a/include/ufs/ufs.h b/include/ufs/ufs.h
new file mode 100644
index 000000000..1bba3fead
--- /dev/null
+++ b/include/ufs/ufs.h
@@ -0,0 +1,623 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFS_H
+#define _UFS_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include <uapi/scsi/scsi_bsg_ufs.h>
+
+#define GENERAL_UPIU_REQUEST_SIZE (sizeof(struct utp_upiu_req))
+#define QUERY_DESC_MAX_SIZE 255
+#define QUERY_DESC_MIN_SIZE 2
+#define QUERY_DESC_HDR_SIZE 2
+#define QUERY_OSF_SIZE (GENERAL_UPIU_REQUEST_SIZE - \
+ (sizeof(struct utp_upiu_header)))
+#define UFS_SENSE_SIZE 18
+
+#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
+ cpu_to_be32((byte3 << 24) | (byte2 << 16) |\
+ (byte1 << 8) | (byte0))
+/*
+ * UFS device may have standard LUs and LUN id could be from 0x00 to
+ * 0x7F. Standard LUs use "Peripheral Device Addressing Format".
+ * UFS device may also have the Well Known LUs (also referred as W-LU)
+ * which again could be from 0x00 to 0x7F. For W-LUs, device only use
+ * the "Extended Addressing Format" which means the W-LUNs would be
+ * from 0xc100 (SCSI_W_LUN_BASE) onwards.
+ * This means max. LUN number reported from UFS device could be 0xC17F.
+ */
+#define UFS_UPIU_MAX_UNIT_NUM_ID 0x7F
+#define UFS_MAX_LUNS (SCSI_W_LUN_BASE + UFS_UPIU_MAX_UNIT_NUM_ID)
+#define UFS_UPIU_WLUN_ID (1 << 7)
+#define UFS_RPMB_UNIT 0xC4
+
+/* WriteBooster buffer is available only for the logical unit from 0 to 7 */
+#define UFS_UPIU_MAX_WB_LUN_ID 8
+
+/*
+ * WriteBooster buffer lifetime has a limit setted by vendor.
+ * If it is over the limit, WriteBooster feature will be disabled.
+ */
+#define UFS_WB_EXCEED_LIFETIME 0x0B
+
+/* Well known logical unit id in LUN field of UPIU */
+enum {
+ UFS_UPIU_REPORT_LUNS_WLUN = 0x81,
+ UFS_UPIU_UFS_DEVICE_WLUN = 0xD0,
+ UFS_UPIU_BOOT_WLUN = 0xB0,
+ UFS_UPIU_RPMB_WLUN = 0xC4,
+};
+
+/*
+ * UFS Protocol Information Unit related definitions
+ */
+
+/* Task management functions */
+enum {
+ UFS_ABORT_TASK = 0x01,
+ UFS_ABORT_TASK_SET = 0x02,
+ UFS_CLEAR_TASK_SET = 0x04,
+ UFS_LOGICAL_RESET = 0x08,
+ UFS_QUERY_TASK = 0x80,
+ UFS_QUERY_TASK_SET = 0x81,
+};
+
+/* UTP UPIU Transaction Codes Initiator to Target */
+enum {
+ UPIU_TRANSACTION_NOP_OUT = 0x00,
+ UPIU_TRANSACTION_COMMAND = 0x01,
+ UPIU_TRANSACTION_DATA_OUT = 0x02,
+ UPIU_TRANSACTION_TASK_REQ = 0x04,
+ UPIU_TRANSACTION_QUERY_REQ = 0x16,
+};
+
+/* UTP UPIU Transaction Codes Target to Initiator */
+enum {
+ UPIU_TRANSACTION_NOP_IN = 0x20,
+ UPIU_TRANSACTION_RESPONSE = 0x21,
+ UPIU_TRANSACTION_DATA_IN = 0x22,
+ UPIU_TRANSACTION_TASK_RSP = 0x24,
+ UPIU_TRANSACTION_READY_XFER = 0x31,
+ UPIU_TRANSACTION_QUERY_RSP = 0x36,
+ UPIU_TRANSACTION_REJECT_UPIU = 0x3F,
+};
+
+/* UPIU Read/Write flags */
+enum {
+ UPIU_CMD_FLAGS_NONE = 0x00,
+ UPIU_CMD_FLAGS_WRITE = 0x20,
+ UPIU_CMD_FLAGS_READ = 0x40,
+};
+
+/* UPIU Task Attributes */
+enum {
+ UPIU_TASK_ATTR_SIMPLE = 0x00,
+ UPIU_TASK_ATTR_ORDERED = 0x01,
+ UPIU_TASK_ATTR_HEADQ = 0x02,
+ UPIU_TASK_ATTR_ACA = 0x03,
+};
+
+/* UPIU Query request function */
+enum {
+ UPIU_QUERY_FUNC_STANDARD_READ_REQUEST = 0x01,
+ UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST = 0x81,
+};
+
+/* Flag idn for Query Requests*/
+enum flag_idn {
+ QUERY_FLAG_IDN_FDEVICEINIT = 0x01,
+ QUERY_FLAG_IDN_PERMANENT_WPE = 0x02,
+ QUERY_FLAG_IDN_PWR_ON_WPE = 0x03,
+ QUERY_FLAG_IDN_BKOPS_EN = 0x04,
+ QUERY_FLAG_IDN_LIFE_SPAN_MODE_ENABLE = 0x05,
+ QUERY_FLAG_IDN_PURGE_ENABLE = 0x06,
+ QUERY_FLAG_IDN_RESERVED2 = 0x07,
+ QUERY_FLAG_IDN_FPHYRESOURCEREMOVAL = 0x08,
+ QUERY_FLAG_IDN_BUSY_RTC = 0x09,
+ QUERY_FLAG_IDN_RESERVED3 = 0x0A,
+ QUERY_FLAG_IDN_PERMANENTLY_DISABLE_FW_UPDATE = 0x0B,
+ QUERY_FLAG_IDN_WB_EN = 0x0E,
+ QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN = 0x0F,
+ QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8 = 0x10,
+ QUERY_FLAG_IDN_HPB_RESET = 0x11,
+ QUERY_FLAG_IDN_HPB_EN = 0x12,
+};
+
+/* Attribute idn for Query requests */
+enum attr_idn {
+ QUERY_ATTR_IDN_BOOT_LU_EN = 0x00,
+ QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD = 0x01,
+ QUERY_ATTR_IDN_POWER_MODE = 0x02,
+ QUERY_ATTR_IDN_ACTIVE_ICC_LVL = 0x03,
+ QUERY_ATTR_IDN_OOO_DATA_EN = 0x04,
+ QUERY_ATTR_IDN_BKOPS_STATUS = 0x05,
+ QUERY_ATTR_IDN_PURGE_STATUS = 0x06,
+ QUERY_ATTR_IDN_MAX_DATA_IN = 0x07,
+ QUERY_ATTR_IDN_MAX_DATA_OUT = 0x08,
+ QUERY_ATTR_IDN_DYN_CAP_NEEDED = 0x09,
+ QUERY_ATTR_IDN_REF_CLK_FREQ = 0x0A,
+ QUERY_ATTR_IDN_CONF_DESC_LOCK = 0x0B,
+ QUERY_ATTR_IDN_MAX_NUM_OF_RTT = 0x0C,
+ QUERY_ATTR_IDN_EE_CONTROL = 0x0D,
+ QUERY_ATTR_IDN_EE_STATUS = 0x0E,
+ QUERY_ATTR_IDN_SECONDS_PASSED = 0x0F,
+ QUERY_ATTR_IDN_CNTX_CONF = 0x10,
+ QUERY_ATTR_IDN_CORR_PRG_BLK_NUM = 0x11,
+ QUERY_ATTR_IDN_RESERVED2 = 0x12,
+ QUERY_ATTR_IDN_RESERVED3 = 0x13,
+ QUERY_ATTR_IDN_FFU_STATUS = 0x14,
+ QUERY_ATTR_IDN_PSA_STATE = 0x15,
+ QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
+ QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME = 0x17,
+ QUERY_ATTR_IDN_CASE_ROUGH_TEMP = 0x18,
+ QUERY_ATTR_IDN_HIGH_TEMP_BOUND = 0x19,
+ QUERY_ATTR_IDN_LOW_TEMP_BOUND = 0x1A,
+ QUERY_ATTR_IDN_WB_FLUSH_STATUS = 0x1C,
+ QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE = 0x1D,
+ QUERY_ATTR_IDN_WB_BUFF_LIFE_TIME_EST = 0x1E,
+ QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE = 0x1F,
+};
+
+/* Descriptor idn for Query requests */
+enum desc_idn {
+ QUERY_DESC_IDN_DEVICE = 0x0,
+ QUERY_DESC_IDN_CONFIGURATION = 0x1,
+ QUERY_DESC_IDN_UNIT = 0x2,
+ QUERY_DESC_IDN_RFU_0 = 0x3,
+ QUERY_DESC_IDN_INTERCONNECT = 0x4,
+ QUERY_DESC_IDN_STRING = 0x5,
+ QUERY_DESC_IDN_RFU_1 = 0x6,
+ QUERY_DESC_IDN_GEOMETRY = 0x7,
+ QUERY_DESC_IDN_POWER = 0x8,
+ QUERY_DESC_IDN_HEALTH = 0x9,
+ QUERY_DESC_IDN_MAX,
+};
+
+enum desc_header_offset {
+ QUERY_DESC_LENGTH_OFFSET = 0x00,
+ QUERY_DESC_DESC_TYPE_OFFSET = 0x01,
+};
+
+/* Unit descriptor parameters offsets in bytes*/
+enum unit_desc_param {
+ UNIT_DESC_PARAM_LEN = 0x0,
+ UNIT_DESC_PARAM_TYPE = 0x1,
+ UNIT_DESC_PARAM_UNIT_INDEX = 0x2,
+ UNIT_DESC_PARAM_LU_ENABLE = 0x3,
+ UNIT_DESC_PARAM_BOOT_LUN_ID = 0x4,
+ UNIT_DESC_PARAM_LU_WR_PROTECT = 0x5,
+ UNIT_DESC_PARAM_LU_Q_DEPTH = 0x6,
+ UNIT_DESC_PARAM_PSA_SENSITIVE = 0x7,
+ UNIT_DESC_PARAM_MEM_TYPE = 0x8,
+ UNIT_DESC_PARAM_DATA_RELIABILITY = 0x9,
+ UNIT_DESC_PARAM_LOGICAL_BLK_SIZE = 0xA,
+ UNIT_DESC_PARAM_LOGICAL_BLK_COUNT = 0xB,
+ UNIT_DESC_PARAM_ERASE_BLK_SIZE = 0x13,
+ UNIT_DESC_PARAM_PROVISIONING_TYPE = 0x17,
+ UNIT_DESC_PARAM_PHY_MEM_RSRC_CNT = 0x18,
+ UNIT_DESC_PARAM_CTX_CAPABILITIES = 0x20,
+ UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22,
+ UNIT_DESC_PARAM_HPB_LU_MAX_ACTIVE_RGNS = 0x23,
+ UNIT_DESC_PARAM_HPB_PIN_RGN_START_OFF = 0x25,
+ UNIT_DESC_PARAM_HPB_NUM_PIN_RGNS = 0x27,
+ UNIT_DESC_PARAM_WB_BUF_ALLOC_UNITS = 0x29,
+};
+
+/* Device descriptor parameters offsets in bytes*/
+enum device_desc_param {
+ DEVICE_DESC_PARAM_LEN = 0x0,
+ DEVICE_DESC_PARAM_TYPE = 0x1,
+ DEVICE_DESC_PARAM_DEVICE_TYPE = 0x2,
+ DEVICE_DESC_PARAM_DEVICE_CLASS = 0x3,
+ DEVICE_DESC_PARAM_DEVICE_SUB_CLASS = 0x4,
+ DEVICE_DESC_PARAM_PRTCL = 0x5,
+ DEVICE_DESC_PARAM_NUM_LU = 0x6,
+ DEVICE_DESC_PARAM_NUM_WLU = 0x7,
+ DEVICE_DESC_PARAM_BOOT_ENBL = 0x8,
+ DEVICE_DESC_PARAM_DESC_ACCSS_ENBL = 0x9,
+ DEVICE_DESC_PARAM_INIT_PWR_MODE = 0xA,
+ DEVICE_DESC_PARAM_HIGH_PR_LUN = 0xB,
+ DEVICE_DESC_PARAM_SEC_RMV_TYPE = 0xC,
+ DEVICE_DESC_PARAM_SEC_LU = 0xD,
+ DEVICE_DESC_PARAM_BKOP_TERM_LT = 0xE,
+ DEVICE_DESC_PARAM_ACTVE_ICC_LVL = 0xF,
+ DEVICE_DESC_PARAM_SPEC_VER = 0x10,
+ DEVICE_DESC_PARAM_MANF_DATE = 0x12,
+ DEVICE_DESC_PARAM_MANF_NAME = 0x14,
+ DEVICE_DESC_PARAM_PRDCT_NAME = 0x15,
+ DEVICE_DESC_PARAM_SN = 0x16,
+ DEVICE_DESC_PARAM_OEM_ID = 0x17,
+ DEVICE_DESC_PARAM_MANF_ID = 0x18,
+ DEVICE_DESC_PARAM_UD_OFFSET = 0x1A,
+ DEVICE_DESC_PARAM_UD_LEN = 0x1B,
+ DEVICE_DESC_PARAM_RTT_CAP = 0x1C,
+ DEVICE_DESC_PARAM_FRQ_RTC = 0x1D,
+ DEVICE_DESC_PARAM_UFS_FEAT = 0x1F,
+ DEVICE_DESC_PARAM_FFU_TMT = 0x20,
+ DEVICE_DESC_PARAM_Q_DPTH = 0x21,
+ DEVICE_DESC_PARAM_DEV_VER = 0x22,
+ DEVICE_DESC_PARAM_NUM_SEC_WPA = 0x24,
+ DEVICE_DESC_PARAM_PSA_MAX_DATA = 0x25,
+ DEVICE_DESC_PARAM_PSA_TMT = 0x29,
+ DEVICE_DESC_PARAM_PRDCT_REV = 0x2A,
+ DEVICE_DESC_PARAM_HPB_VER = 0x40,
+ DEVICE_DESC_PARAM_HPB_CONTROL = 0x42,
+ DEVICE_DESC_PARAM_EXT_UFS_FEATURE_SUP = 0x4F,
+ DEVICE_DESC_PARAM_WB_PRESRV_USRSPC_EN = 0x53,
+ DEVICE_DESC_PARAM_WB_TYPE = 0x54,
+ DEVICE_DESC_PARAM_WB_SHARED_ALLOC_UNITS = 0x55,
+};
+
+/* Interconnect descriptor parameters offsets in bytes*/
+enum interconnect_desc_param {
+ INTERCONNECT_DESC_PARAM_LEN = 0x0,
+ INTERCONNECT_DESC_PARAM_TYPE = 0x1,
+ INTERCONNECT_DESC_PARAM_UNIPRO_VER = 0x2,
+ INTERCONNECT_DESC_PARAM_MPHY_VER = 0x4,
+};
+
+/* Geometry descriptor parameters offsets in bytes*/
+enum geometry_desc_param {
+ GEOMETRY_DESC_PARAM_LEN = 0x0,
+ GEOMETRY_DESC_PARAM_TYPE = 0x1,
+ GEOMETRY_DESC_PARAM_DEV_CAP = 0x4,
+ GEOMETRY_DESC_PARAM_MAX_NUM_LUN = 0xC,
+ GEOMETRY_DESC_PARAM_SEG_SIZE = 0xD,
+ GEOMETRY_DESC_PARAM_ALLOC_UNIT_SIZE = 0x11,
+ GEOMETRY_DESC_PARAM_MIN_BLK_SIZE = 0x12,
+ GEOMETRY_DESC_PARAM_OPT_RD_BLK_SIZE = 0x13,
+ GEOMETRY_DESC_PARAM_OPT_WR_BLK_SIZE = 0x14,
+ GEOMETRY_DESC_PARAM_MAX_IN_BUF_SIZE = 0x15,
+ GEOMETRY_DESC_PARAM_MAX_OUT_BUF_SIZE = 0x16,
+ GEOMETRY_DESC_PARAM_RPMB_RW_SIZE = 0x17,
+ GEOMETRY_DESC_PARAM_DYN_CAP_RSRC_PLC = 0x18,
+ GEOMETRY_DESC_PARAM_DATA_ORDER = 0x19,
+ GEOMETRY_DESC_PARAM_MAX_NUM_CTX = 0x1A,
+ GEOMETRY_DESC_PARAM_TAG_UNIT_SIZE = 0x1B,
+ GEOMETRY_DESC_PARAM_TAG_RSRC_SIZE = 0x1C,
+ GEOMETRY_DESC_PARAM_SEC_RM_TYPES = 0x1D,
+ GEOMETRY_DESC_PARAM_MEM_TYPES = 0x1E,
+ GEOMETRY_DESC_PARAM_SCM_MAX_NUM_UNITS = 0x20,
+ GEOMETRY_DESC_PARAM_SCM_CAP_ADJ_FCTR = 0x24,
+ GEOMETRY_DESC_PARAM_NPM_MAX_NUM_UNITS = 0x26,
+ GEOMETRY_DESC_PARAM_NPM_CAP_ADJ_FCTR = 0x2A,
+ GEOMETRY_DESC_PARAM_ENM1_MAX_NUM_UNITS = 0x2C,
+ GEOMETRY_DESC_PARAM_ENM1_CAP_ADJ_FCTR = 0x30,
+ GEOMETRY_DESC_PARAM_ENM2_MAX_NUM_UNITS = 0x32,
+ GEOMETRY_DESC_PARAM_ENM2_CAP_ADJ_FCTR = 0x36,
+ GEOMETRY_DESC_PARAM_ENM3_MAX_NUM_UNITS = 0x38,
+ GEOMETRY_DESC_PARAM_ENM3_CAP_ADJ_FCTR = 0x3C,
+ GEOMETRY_DESC_PARAM_ENM4_MAX_NUM_UNITS = 0x3E,
+ GEOMETRY_DESC_PARAM_ENM4_CAP_ADJ_FCTR = 0x42,
+ GEOMETRY_DESC_PARAM_OPT_LOG_BLK_SIZE = 0x44,
+ GEOMETRY_DESC_PARAM_HPB_REGION_SIZE = 0x48,
+ GEOMETRY_DESC_PARAM_HPB_NUMBER_LU = 0x49,
+ GEOMETRY_DESC_PARAM_HPB_SUBREGION_SIZE = 0x4A,
+ GEOMETRY_DESC_PARAM_HPB_MAX_ACTIVE_REGS = 0x4B,
+ GEOMETRY_DESC_PARAM_WB_MAX_ALLOC_UNITS = 0x4F,
+ GEOMETRY_DESC_PARAM_WB_MAX_WB_LUNS = 0x53,
+ GEOMETRY_DESC_PARAM_WB_BUFF_CAP_ADJ = 0x54,
+ GEOMETRY_DESC_PARAM_WB_SUP_RED_TYPE = 0x55,
+ GEOMETRY_DESC_PARAM_WB_SUP_WB_TYPE = 0x56,
+};
+
+/* Health descriptor parameters offsets in bytes*/
+enum health_desc_param {
+ HEALTH_DESC_PARAM_LEN = 0x0,
+ HEALTH_DESC_PARAM_TYPE = 0x1,
+ HEALTH_DESC_PARAM_EOL_INFO = 0x2,
+ HEALTH_DESC_PARAM_LIFE_TIME_EST_A = 0x3,
+ HEALTH_DESC_PARAM_LIFE_TIME_EST_B = 0x4,
+};
+
+/* WriteBooster buffer mode */
+enum {
+ WB_BUF_MODE_LU_DEDICATED = 0x0,
+ WB_BUF_MODE_SHARED = 0x1,
+};
+
+/*
+ * Logical Unit Write Protect
+ * 00h: LU not write protected
+ * 01h: LU write protected when fPowerOnWPEn =1
+ * 02h: LU permanently write protected when fPermanentWPEn =1
+ */
+enum ufs_lu_wp_type {
+ UFS_LU_NO_WP = 0x00,
+ UFS_LU_POWER_ON_WP = 0x01,
+ UFS_LU_PERM_WP = 0x02,
+};
+
+/* bActiveICCLevel parameter current units */
+enum {
+ UFSHCD_NANO_AMP = 0,
+ UFSHCD_MICRO_AMP = 1,
+ UFSHCD_MILI_AMP = 2,
+ UFSHCD_AMP = 3,
+};
+
+/* Possible values for dExtendedUFSFeaturesSupport */
+enum {
+ UFS_DEV_LOW_TEMP_NOTIF = BIT(4),
+ UFS_DEV_HIGH_TEMP_NOTIF = BIT(5),
+ UFS_DEV_EXT_TEMP_NOTIF = BIT(6),
+ UFS_DEV_HPB_SUPPORT = BIT(7),
+ UFS_DEV_WRITE_BOOSTER_SUP = BIT(8),
+};
+#define UFS_DEV_HPB_SUPPORT_VERSION 0x310
+
+#define POWER_DESC_MAX_ACTV_ICC_LVLS 16
+
+/* Attribute bActiveICCLevel parameter bit masks definitions */
+#define ATTR_ICC_LVL_UNIT_OFFSET 14
+#define ATTR_ICC_LVL_UNIT_MASK (0x3 << ATTR_ICC_LVL_UNIT_OFFSET)
+#define ATTR_ICC_LVL_VALUE_MASK 0x3FF
+
+/* Power descriptor parameters offsets in bytes */
+enum power_desc_param_offset {
+ PWR_DESC_LEN = 0x0,
+ PWR_DESC_TYPE = 0x1,
+ PWR_DESC_ACTIVE_LVLS_VCC_0 = 0x2,
+ PWR_DESC_ACTIVE_LVLS_VCCQ_0 = 0x22,
+ PWR_DESC_ACTIVE_LVLS_VCCQ2_0 = 0x42,
+};
+
+/* Exception event mask values */
+enum {
+ MASK_EE_STATUS = 0xFFFF,
+ MASK_EE_DYNCAP_EVENT = BIT(0),
+ MASK_EE_SYSPOOL_EVENT = BIT(1),
+ MASK_EE_URGENT_BKOPS = BIT(2),
+ MASK_EE_TOO_HIGH_TEMP = BIT(3),
+ MASK_EE_TOO_LOW_TEMP = BIT(4),
+ MASK_EE_WRITEBOOSTER_EVENT = BIT(5),
+ MASK_EE_PERFORMANCE_THROTTLING = BIT(6),
+};
+#define MASK_EE_URGENT_TEMP (MASK_EE_TOO_HIGH_TEMP | MASK_EE_TOO_LOW_TEMP)
+
+/* Background operation status */
+enum bkops_status {
+ BKOPS_STATUS_NO_OP = 0x0,
+ BKOPS_STATUS_NON_CRITICAL = 0x1,
+ BKOPS_STATUS_PERF_IMPACT = 0x2,
+ BKOPS_STATUS_CRITICAL = 0x3,
+ BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL,
+};
+
+/* UTP QUERY Transaction Specific Fields OpCode */
+enum query_opcode {
+ UPIU_QUERY_OPCODE_NOP = 0x0,
+ UPIU_QUERY_OPCODE_READ_DESC = 0x1,
+ UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
+ UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
+ UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
+ UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
+ UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
+ UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
+ UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
+};
+
+/* bRefClkFreq attribute values */
+enum ufs_ref_clk_freq {
+ REF_CLK_FREQ_19_2_MHZ = 0,
+ REF_CLK_FREQ_26_MHZ = 1,
+ REF_CLK_FREQ_38_4_MHZ = 2,
+ REF_CLK_FREQ_52_MHZ = 3,
+ REF_CLK_FREQ_INVAL = -1,
+};
+
+/* Query response result code */
+enum {
+ QUERY_RESULT_SUCCESS = 0x00,
+ QUERY_RESULT_NOT_READABLE = 0xF6,
+ QUERY_RESULT_NOT_WRITEABLE = 0xF7,
+ QUERY_RESULT_ALREADY_WRITTEN = 0xF8,
+ QUERY_RESULT_INVALID_LENGTH = 0xF9,
+ QUERY_RESULT_INVALID_VALUE = 0xFA,
+ QUERY_RESULT_INVALID_SELECTOR = 0xFB,
+ QUERY_RESULT_INVALID_INDEX = 0xFC,
+ QUERY_RESULT_INVALID_IDN = 0xFD,
+ QUERY_RESULT_INVALID_OPCODE = 0xFE,
+ QUERY_RESULT_GENERAL_FAILURE = 0xFF,
+};
+
+/* UTP Transfer Request Command Type (CT) */
+enum {
+ UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
+ UPIU_COMMAND_SET_TYPE_UFS = 0x1,
+ UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
+};
+
+/* UTP Transfer Request Command Offset */
+#define UPIU_COMMAND_TYPE_OFFSET 28
+
+/* Offset of the response code in the UPIU header */
+#define UPIU_RSP_CODE_OFFSET 8
+
+enum {
+ MASK_SCSI_STATUS = 0xFF,
+ MASK_TASK_RESPONSE = 0xFF00,
+ MASK_RSP_UPIU_RESULT = 0xFFFF,
+ MASK_QUERY_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_UPIU_DATA_SEG_LEN = 0xFFFF,
+ MASK_RSP_EXCEPTION_EVENT = 0x10000,
+ MASK_TM_SERVICE_RESP = 0xFF,
+ MASK_TM_FUNC = 0xFF,
+};
+
+/* Task management service response */
+enum {
+ UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
+ UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
+ UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
+ UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
+ UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
+};
+
+/* UFS device power modes */
+enum ufs_dev_pwr_mode {
+ UFS_ACTIVE_PWR_MODE = 1,
+ UFS_SLEEP_PWR_MODE = 2,
+ UFS_POWERDOWN_PWR_MODE = 3,
+ UFS_DEEPSLEEP_PWR_MODE = 4,
+};
+
+#define UFS_WB_BUF_REMAIN_PERCENT(val) ((val) / 10)
+
+/**
+ * struct utp_cmd_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @sense_data: Sense data field DW-8 to DW-12
+ */
+struct utp_cmd_rsp {
+ __be32 residual_transfer_count;
+ __be32 reserved[4];
+ __be16 sense_data_len;
+ u8 sense_data[UFS_SENSE_SIZE];
+};
+
+struct ufshpb_active_field {
+ __be16 active_rgn;
+ __be16 active_srgn;
+};
+#define HPB_ACT_FIELD_SIZE 4
+
+/**
+ * struct utp_hpb_rsp - Response UPIU structure
+ * @residual_transfer_count: Residual transfer count DW-3
+ * @reserved1: Reserved double words DW-4 to DW-7
+ * @sense_data_len: Sense data length DW-8 U16
+ * @desc_type: Descriptor type of sense data
+ * @additional_len: Additional length of sense data
+ * @hpb_op: HPB operation type
+ * @lun: LUN of response UPIU
+ * @active_rgn_cnt: Active region count
+ * @inactive_rgn_cnt: Inactive region count
+ * @hpb_active_field: Recommended to read HPB region and subregion
+ * @hpb_inactive_field: To be inactivated HPB region and subregion
+ */
+struct utp_hpb_rsp {
+ __be32 residual_transfer_count;
+ __be32 reserved1[4];
+ __be16 sense_data_len;
+ u8 desc_type;
+ u8 additional_len;
+ u8 hpb_op;
+ u8 lun;
+ u8 active_rgn_cnt;
+ u8 inactive_rgn_cnt;
+ struct ufshpb_active_field hpb_active_field[2];
+ __be16 hpb_inactive_field[2];
+};
+#define UTP_HPB_RSP_SIZE 40
+
+/**
+ * struct utp_upiu_rsp - general upiu response structure
+ * @header: UPIU header structure DW-0 to DW-2
+ * @sr: fields structure for scsi command DW-3 to DW-12
+ * @qr: fields structure for query request DW-3 to DW-7
+ */
+struct utp_upiu_rsp {
+ struct utp_upiu_header header;
+ union {
+ struct utp_cmd_rsp sr;
+ struct utp_hpb_rsp hr;
+ struct utp_upiu_query qr;
+ };
+};
+
+/**
+ * struct ufs_query_req - parameters for building a query request
+ * @query_func: UPIU header query function
+ * @upiu_req: the query request data
+ */
+struct ufs_query_req {
+ u8 query_func;
+ struct utp_upiu_query upiu_req;
+};
+
+/**
+ * struct ufs_query_resp - UPIU QUERY
+ * @response: device response code
+ * @upiu_res: query response data
+ */
+struct ufs_query_res {
+ u8 response;
+ struct utp_upiu_query upiu_res;
+};
+
+/*
+ * VCCQ & VCCQ2 current requirement when UFS device is in sleep state
+ * and link is in Hibern8 state.
+ */
+#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */
+
+struct ufs_vreg {
+ struct regulator *reg;
+ const char *name;
+ bool always_on;
+ bool enabled;
+ int max_uA;
+};
+
+struct ufs_vreg_info {
+ struct ufs_vreg *vcc;
+ struct ufs_vreg *vccq;
+ struct ufs_vreg *vccq2;
+ struct ufs_vreg *vdd_hba;
+};
+
+struct ufs_dev_info {
+ bool f_power_on_wp_en;
+ /* Keeps information if any of the LU is power on write protected */
+ bool is_lu_power_on_wp;
+ /* Maximum number of general LU supported by the UFS device */
+ u8 max_lu_supported;
+ u16 wmanufacturerid;
+ /*UFS device Product Name */
+ u8 *model;
+ u16 wspecversion;
+ u32 clk_gating_wait_us;
+
+ /* UFS HPB related flag */
+ bool hpb_enabled;
+
+ /* UFS WB related flags */
+ bool wb_enabled;
+ bool wb_buf_flush_enabled;
+ u8 wb_dedicated_lu;
+ u8 wb_buffer_type;
+
+ bool b_rpm_dev_flush_capable;
+ u8 b_presrv_uspc_en;
+};
+
+/*
+ * This enum is used in string mapping in include/trace/events/ufs.h.
+ */
+enum ufs_trace_str_t {
+ UFS_CMD_SEND, UFS_CMD_COMP, UFS_DEV_COMP,
+ UFS_QUERY_SEND, UFS_QUERY_COMP, UFS_QUERY_ERR,
+ UFS_TM_SEND, UFS_TM_COMP, UFS_TM_ERR
+};
+
+/*
+ * Transaction Specific Fields (TSF) type in the UPIU package, this enum is
+ * used in include/trace/events/ufs.h for UFS command trace.
+ */
+enum ufs_trace_tsf_t {
+ UFS_TSF_CDB, UFS_TSF_OSF, UFS_TSF_TM_INPUT, UFS_TSF_TM_OUTPUT
+};
+
+#endif /* End of Header */
diff --git a/include/ufs/ufs_quirks.h b/include/ufs/ufs_quirks.h
new file mode 100644
index 000000000..bcb4f004b
--- /dev/null
+++ b/include/ufs/ufs_quirks.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _UFS_QUIRKS_H_
+#define _UFS_QUIRKS_H_
+
+/* return true if s1 is a prefix of s2 */
+#define STR_PRFX_EQUAL(s1, s2) !strncmp(s1, s2, strlen(s1))
+
+#define UFS_ANY_VENDOR 0xFFFF
+#define UFS_ANY_MODEL "ANY_MODEL"
+
+#define UFS_VENDOR_MICRON 0x12C
+#define UFS_VENDOR_SAMSUNG 0x1CE
+#define UFS_VENDOR_SKHYNIX 0x1AD
+#define UFS_VENDOR_TOSHIBA 0x198
+#define UFS_VENDOR_WDC 0x145
+
+/**
+ * ufs_dev_quirk - ufs device quirk info
+ * @card: ufs card details
+ * @quirk: device quirk
+ */
+struct ufs_dev_quirk {
+ u16 wmanufacturerid;
+ const u8 *model;
+ unsigned int quirk;
+};
+
+/*
+ * Some vendor's UFS device sends back to back NACs for the DL data frames
+ * causing the host controller to raise the DFES error status. Sometimes
+ * such UFS devices send back to back NAC without waiting for new
+ * retransmitted DL frame from the host and in such cases it might be possible
+ * the Host UniPro goes into bad state without raising the DFES error
+ * interrupt. If this happens then all the pending commands would timeout
+ * only after respective SW command (which is generally too large).
+ *
+ * We can workaround such device behaviour like this:
+ * - As soon as SW sees the DL NAC error, it should schedule the error handler
+ * - Error handler would sleep for 50ms to see if there are any fatal errors
+ * raised by UFS controller.
+ * - If there are fatal errors then SW does normal error recovery.
+ * - If there are no fatal errors then SW sends the NOP command to device
+ * to check if link is alive.
+ * - If NOP command times out, SW does normal error recovery
+ * - If NOP command succeed, skip the error handling.
+ *
+ * If DL NAC error is seen multiple times with some vendor's UFS devices then
+ * enable this quirk to initiate quick error recovery and also silence related
+ * error logs to reduce spamming of kernel logs.
+ */
+#define UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS (1 << 2)
+
+/*
+ * Few Toshiba UFS device models advertise RX_MIN_ACTIVATETIME_CAPABILITY as
+ * 600us which may not be enough for reliable hibern8 exit hardware sequence
+ * from UFS device.
+ * To workaround this issue, host should set its PA_TACTIVATE time to 1ms even
+ * if device advertises RX_MIN_ACTIVATETIME_CAPABILITY less than 1ms.
+ */
+#define UFS_DEVICE_QUIRK_PA_TACTIVATE (1 << 4)
+
+/*
+ * It seems some UFS devices may keep drawing more than sleep current
+ * (atleast for 500us) from UFS rails (especially from VCCQ rail).
+ * To avoid this situation, add 2ms delay before putting these UFS
+ * rails in LPM mode.
+ */
+#define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM (1 << 6)
+
+/*
+ * Some UFS devices require host PA_TACTIVATE to be lower than device
+ * PA_TACTIVATE, enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE (1 << 7)
+
+/*
+ * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
+ * some vendors.
+ * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
+ * Gear switch can be issued by host controller as an error recovery and any
+ * software delay will not help on this case so we need to increase
+ * PA_SaveConfigTime to >32us as per vendor recommendation.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
+
+/*
+ * Some UFS devices require VS_DebugSaveConfigTime is 0x10,
+ * enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_VS_DEBUGSAVECONFIGTIME (1 << 9)
+
+/*
+ * Some pre-3.1 UFS devices can support extended features by upgrading
+ * the firmware. Enable this quirk to make UFS core driver probe and enable
+ * supported features on such devices.
+ */
+#define UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES (1 << 10)
+
+/*
+ * Some UFS devices require delay after VCC power rail is turned-off.
+ * Enable this quirk to introduce 5ms delays after VCC power-off during
+ * suspend flow.
+ */
+#define UFS_DEVICE_QUIRK_DELAY_AFTER_LPM (1 << 11)
+
+/*
+ * Some UFS devices require L2P entry should be swapped before being sent to the
+ * UFS device for HPB READ command.
+ */
+#define UFS_DEVICE_QUIRK_SWAP_L2P_ENTRY_FOR_HPB_READ (1 << 12)
+
+#endif /* UFS_QUIRKS_H_ */
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
new file mode 100644
index 000000000..b54f22840
--- /dev/null
+++ b/include/ufs/ufshcd.h
@@ -0,0 +1,1243 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFSHCD_H
+#define _UFSHCD_H
+
+#include <linux/bitfield.h>
+#include <linux/blk-crypto-profile.h>
+#include <linux/blk-mq.h>
+#include <linux/devfreq.h>
+#include <linux/pm_runtime.h>
+#include <scsi/scsi_device.h>
+#include <ufs/unipro.h>
+#include <ufs/ufs.h>
+#include <ufs/ufs_quirks.h>
+#include <ufs/ufshci.h>
+
+#define UFSHCD "ufshcd"
+
+struct ufs_hba;
+
+enum dev_cmd_type {
+ DEV_CMD_TYPE_NOP = 0x0,
+ DEV_CMD_TYPE_QUERY = 0x1,
+};
+
+enum ufs_event_type {
+ /* uic specific errors */
+ UFS_EVT_PA_ERR = 0,
+ UFS_EVT_DL_ERR,
+ UFS_EVT_NL_ERR,
+ UFS_EVT_TL_ERR,
+ UFS_EVT_DME_ERR,
+
+ /* fatal errors */
+ UFS_EVT_AUTO_HIBERN8_ERR,
+ UFS_EVT_FATAL_ERR,
+ UFS_EVT_LINK_STARTUP_FAIL,
+ UFS_EVT_RESUME_ERR,
+ UFS_EVT_SUSPEND_ERR,
+ UFS_EVT_WL_SUSP_ERR,
+ UFS_EVT_WL_RES_ERR,
+
+ /* abnormal events */
+ UFS_EVT_DEV_RESET,
+ UFS_EVT_HOST_RESET,
+ UFS_EVT_ABORT,
+
+ UFS_EVT_CNT,
+};
+
+/**
+ * struct uic_command - UIC command structure
+ * @command: UIC command
+ * @argument1: UIC command argument 1
+ * @argument2: UIC command argument 2
+ * @argument3: UIC command argument 3
+ * @cmd_active: Indicate if UIC command is outstanding
+ * @done: UIC command completion
+ */
+struct uic_command {
+ u32 command;
+ u32 argument1;
+ u32 argument2;
+ u32 argument3;
+ int cmd_active;
+ struct completion done;
+};
+
+/* Used to differentiate the power management options */
+enum ufs_pm_op {
+ UFS_RUNTIME_PM,
+ UFS_SYSTEM_PM,
+ UFS_SHUTDOWN_PM,
+};
+
+/* Host <-> Device UniPro Link state */
+enum uic_link_state {
+ UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
+ UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
+ UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
+ UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */
+};
+
+#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
+#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
+ UIC_LINK_ACTIVE_STATE)
+#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
+ UIC_LINK_HIBERN8_STATE)
+#define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
+ UIC_LINK_BROKEN_STATE)
+#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
+#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
+ UIC_LINK_ACTIVE_STATE)
+#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
+ UIC_LINK_HIBERN8_STATE)
+#define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
+ UIC_LINK_BROKEN_STATE)
+
+#define ufshcd_set_ufs_dev_active(h) \
+ ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
+#define ufshcd_set_ufs_dev_sleep(h) \
+ ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
+#define ufshcd_set_ufs_dev_poweroff(h) \
+ ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
+#define ufshcd_set_ufs_dev_deepsleep(h) \
+ ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
+#define ufshcd_is_ufs_dev_active(h) \
+ ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
+#define ufshcd_is_ufs_dev_sleep(h) \
+ ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
+#define ufshcd_is_ufs_dev_poweroff(h) \
+ ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
+#define ufshcd_is_ufs_dev_deepsleep(h) \
+ ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
+
+/*
+ * UFS Power management levels.
+ * Each level is in increasing order of power savings, except DeepSleep
+ * which is lower than PowerDown with power on but not PowerDown with
+ * power off.
+ */
+enum ufs_pm_level {
+ UFS_PM_LVL_0,
+ UFS_PM_LVL_1,
+ UFS_PM_LVL_2,
+ UFS_PM_LVL_3,
+ UFS_PM_LVL_4,
+ UFS_PM_LVL_5,
+ UFS_PM_LVL_6,
+ UFS_PM_LVL_MAX
+};
+
+struct ufs_pm_lvl_states {
+ enum ufs_dev_pwr_mode dev_state;
+ enum uic_link_state link_state;
+};
+
+/**
+ * struct ufshcd_lrb - local reference block
+ * @utr_descriptor_ptr: UTRD address of the command
+ * @ucd_req_ptr: UCD address of the command
+ * @ucd_rsp_ptr: Response UPIU address for this command
+ * @ucd_prdt_ptr: PRDT address of the command
+ * @utrd_dma_addr: UTRD dma address for debug
+ * @ucd_prdt_dma_addr: PRDT dma address for debug
+ * @ucd_rsp_dma_addr: UPIU response dma address for debug
+ * @ucd_req_dma_addr: UPIU request dma address for debug
+ * @cmd: pointer to SCSI command
+ * @scsi_status: SCSI status of the command
+ * @command_type: SCSI, UFS, Query.
+ * @task_tag: Task tag of the command
+ * @lun: LUN of the command
+ * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
+ * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC)
+ * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock)
+ * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC)
+ * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock)
+ * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
+ * @data_unit_num: the data unit number for the first block for inline crypto
+ * @req_abort_skip: skip request abort task flag
+ */
+struct ufshcd_lrb {
+ struct utp_transfer_req_desc *utr_descriptor_ptr;
+ struct utp_upiu_req *ucd_req_ptr;
+ struct utp_upiu_rsp *ucd_rsp_ptr;
+ struct ufshcd_sg_entry *ucd_prdt_ptr;
+
+ dma_addr_t utrd_dma_addr;
+ dma_addr_t ucd_req_dma_addr;
+ dma_addr_t ucd_rsp_dma_addr;
+ dma_addr_t ucd_prdt_dma_addr;
+
+ struct scsi_cmnd *cmd;
+ int scsi_status;
+
+ int command_type;
+ int task_tag;
+ u8 lun; /* UPIU LUN id field is only 8-bit wide */
+ bool intr_cmd;
+ ktime_t issue_time_stamp;
+ u64 issue_time_stamp_local_clock;
+ ktime_t compl_time_stamp;
+ u64 compl_time_stamp_local_clock;
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+ int crypto_key_slot;
+ u64 data_unit_num;
+#endif
+
+ bool req_abort_skip;
+};
+
+/**
+ * struct ufs_query - holds relevant data structures for query request
+ * @request: request upiu and function
+ * @descriptor: buffer for sending/receiving descriptor
+ * @response: response upiu and response
+ */
+struct ufs_query {
+ struct ufs_query_req request;
+ u8 *descriptor;
+ struct ufs_query_res response;
+};
+
+/**
+ * struct ufs_dev_cmd - all assosiated fields with device management commands
+ * @type: device management command type - Query, NOP OUT
+ * @lock: lock to allow one command at a time
+ * @complete: internal commands completion
+ * @query: Device management query information
+ */
+struct ufs_dev_cmd {
+ enum dev_cmd_type type;
+ struct mutex lock;
+ struct completion *complete;
+ struct ufs_query query;
+};
+
+/**
+ * struct ufs_clk_info - UFS clock related info
+ * @list: list headed by hba->clk_list_head
+ * @clk: clock node
+ * @name: clock name
+ * @max_freq: maximum frequency supported by the clock
+ * @min_freq: min frequency that can be used for clock scaling
+ * @curr_freq: indicates the current frequency that it is set to
+ * @keep_link_active: indicates that the clk should not be disabled if
+ * link is active
+ * @enabled: variable to check against multiple enable/disable
+ */
+struct ufs_clk_info {
+ struct list_head list;
+ struct clk *clk;
+ const char *name;
+ u32 max_freq;
+ u32 min_freq;
+ u32 curr_freq;
+ bool keep_link_active;
+ bool enabled;
+};
+
+enum ufs_notify_change_status {
+ PRE_CHANGE,
+ POST_CHANGE,
+};
+
+struct ufs_pa_layer_attr {
+ u32 gear_rx;
+ u32 gear_tx;
+ u32 lane_rx;
+ u32 lane_tx;
+ u32 pwr_rx;
+ u32 pwr_tx;
+ u32 hs_rate;
+};
+
+struct ufs_pwr_mode_info {
+ bool is_valid;
+ struct ufs_pa_layer_attr info;
+};
+
+/**
+ * struct ufs_hba_variant_ops - variant specific callbacks
+ * @name: variant name
+ * @init: called when the driver is initialized
+ * @exit: called to cleanup everything done in init
+ * @get_ufs_hci_version: called to get UFS HCI version
+ * @clk_scale_notify: notifies that clks are scaled up/down
+ * @setup_clocks: called before touching any of the controller registers
+ * @hce_enable_notify: called before and after HCE enable bit is set to allow
+ * variant specific Uni-Pro initialization.
+ * @link_startup_notify: called before and after Link startup is carried out
+ * to allow variant specific Uni-Pro initialization.
+ * @pwr_change_notify: called before and after a power mode change
+ * is carried out to allow vendor spesific capabilities
+ * to be set.
+ * @setup_xfer_req: called before any transfer request is issued
+ * to set some things
+ * @setup_task_mgmt: called before any task management request is issued
+ * to set some things
+ * @hibern8_notify: called around hibern8 enter/exit
+ * @apply_dev_quirks: called to apply device specific quirks
+ * @fixup_dev_quirks: called to modify device specific quirks
+ * @suspend: called during host controller PM callback
+ * @resume: called during host controller PM callback
+ * @dbg_register_dump: used to dump controller debug information
+ * @phy_initialization: used to initialize phys
+ * @device_reset: called to issue a reset pulse on the UFS device
+ * @config_scaling_param: called to configure clock scaling parameters
+ * @program_key: program or evict an inline encryption key
+ * @event_notify: called to notify important events
+ */
+struct ufs_hba_variant_ops {
+ const char *name;
+ int (*init)(struct ufs_hba *);
+ void (*exit)(struct ufs_hba *);
+ u32 (*get_ufs_hci_version)(struct ufs_hba *);
+ int (*clk_scale_notify)(struct ufs_hba *, bool,
+ enum ufs_notify_change_status);
+ int (*setup_clocks)(struct ufs_hba *, bool,
+ enum ufs_notify_change_status);
+ int (*hce_enable_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status);
+ int (*link_startup_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status);
+ int (*pwr_change_notify)(struct ufs_hba *,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *,
+ struct ufs_pa_layer_attr *);
+ void (*setup_xfer_req)(struct ufs_hba *hba, int tag,
+ bool is_scsi_cmd);
+ void (*setup_task_mgmt)(struct ufs_hba *, int, u8);
+ void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
+ enum ufs_notify_change_status);
+ int (*apply_dev_quirks)(struct ufs_hba *hba);
+ void (*fixup_dev_quirks)(struct ufs_hba *hba);
+ int (*suspend)(struct ufs_hba *, enum ufs_pm_op,
+ enum ufs_notify_change_status);
+ int (*resume)(struct ufs_hba *, enum ufs_pm_op);
+ void (*dbg_register_dump)(struct ufs_hba *hba);
+ int (*phy_initialization)(struct ufs_hba *);
+ int (*device_reset)(struct ufs_hba *hba);
+ void (*config_scaling_param)(struct ufs_hba *hba,
+ struct devfreq_dev_profile *profile,
+ struct devfreq_simple_ondemand_data *data);
+ int (*program_key)(struct ufs_hba *hba,
+ const union ufs_crypto_cfg_entry *cfg, int slot);
+ void (*event_notify)(struct ufs_hba *hba,
+ enum ufs_event_type evt, void *data);
+};
+
+/* clock gating state */
+enum clk_gating_state {
+ CLKS_OFF,
+ CLKS_ON,
+ REQ_CLKS_OFF,
+ REQ_CLKS_ON,
+};
+
+/**
+ * struct ufs_clk_gating - UFS clock gating related info
+ * @gate_work: worker to turn off clocks after some delay as specified in
+ * delay_ms
+ * @ungate_work: worker to turn on clocks that will be used in case of
+ * interrupt context
+ * @state: the current clocks state
+ * @delay_ms: gating delay in ms
+ * @is_suspended: clk gating is suspended when set to 1 which can be used
+ * during suspend/resume
+ * @delay_attr: sysfs attribute to control delay_attr
+ * @enable_attr: sysfs attribute to enable/disable clock gating
+ * @is_enabled: Indicates the current status of clock gating
+ * @is_initialized: Indicates whether clock gating is initialized or not
+ * @active_reqs: number of requests that are pending and should be waited for
+ * completion before gating clocks.
+ * @clk_gating_workq: workqueue for clock gating work.
+ */
+struct ufs_clk_gating {
+ struct delayed_work gate_work;
+ struct work_struct ungate_work;
+ enum clk_gating_state state;
+ unsigned long delay_ms;
+ bool is_suspended;
+ struct device_attribute delay_attr;
+ struct device_attribute enable_attr;
+ bool is_enabled;
+ bool is_initialized;
+ int active_reqs;
+ struct workqueue_struct *clk_gating_workq;
+};
+
+struct ufs_saved_pwr_info {
+ struct ufs_pa_layer_attr info;
+ bool is_valid;
+};
+
+/**
+ * struct ufs_clk_scaling - UFS clock scaling related data
+ * @active_reqs: number of requests that are pending. If this is zero when
+ * devfreq ->target() function is called then schedule "suspend_work" to
+ * suspend devfreq.
+ * @tot_busy_t: Total busy time in current polling window
+ * @window_start_t: Start time (in jiffies) of the current polling window
+ * @busy_start_t: Start time of current busy period
+ * @enable_attr: sysfs attribute to enable/disable clock scaling
+ * @saved_pwr_info: UFS power mode may also be changed during scaling and this
+ * one keeps track of previous power mode.
+ * @workq: workqueue to schedule devfreq suspend/resume work
+ * @suspend_work: worker to suspend devfreq
+ * @resume_work: worker to resume devfreq
+ * @min_gear: lowest HS gear to scale down to
+ * @is_enabled: tracks if scaling is currently enabled or not, controlled by
+ * clkscale_enable sysfs node
+ * @is_allowed: tracks if scaling is currently allowed or not, used to block
+ * clock scaling which is not invoked from devfreq governor
+ * @is_initialized: Indicates whether clock scaling is initialized or not
+ * @is_busy_started: tracks if busy period has started or not
+ * @is_suspended: tracks if devfreq is suspended or not
+ */
+struct ufs_clk_scaling {
+ int active_reqs;
+ unsigned long tot_busy_t;
+ ktime_t window_start_t;
+ ktime_t busy_start_t;
+ struct device_attribute enable_attr;
+ struct ufs_saved_pwr_info saved_pwr_info;
+ struct workqueue_struct *workq;
+ struct work_struct suspend_work;
+ struct work_struct resume_work;
+ u32 min_gear;
+ bool is_enabled;
+ bool is_allowed;
+ bool is_initialized;
+ bool is_busy_started;
+ bool is_suspended;
+};
+
+#define UFS_EVENT_HIST_LENGTH 8
+/**
+ * struct ufs_event_hist - keeps history of errors
+ * @pos: index to indicate cyclic buffer position
+ * @val: cyclic buffer for registers value
+ * @tstamp: cyclic buffer for time stamp
+ * @cnt: error counter
+ */
+struct ufs_event_hist {
+ int pos;
+ u32 val[UFS_EVENT_HIST_LENGTH];
+ u64 tstamp[UFS_EVENT_HIST_LENGTH];
+ unsigned long long cnt;
+};
+
+/**
+ * struct ufs_stats - keeps usage/err statistics
+ * @last_intr_status: record the last interrupt status.
+ * @last_intr_ts: record the last interrupt timestamp.
+ * @hibern8_exit_cnt: Counter to keep track of number of exits,
+ * reset this after link-startup.
+ * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
+ * Clear after the first successful command completion.
+ * @event: array with event history.
+ */
+struct ufs_stats {
+ u32 last_intr_status;
+ u64 last_intr_ts;
+
+ u32 hibern8_exit_cnt;
+ u64 last_hibern8_exit_tstamp;
+ struct ufs_event_hist event[UFS_EVT_CNT];
+};
+
+/**
+ * enum ufshcd_state - UFS host controller state
+ * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
+ * processing.
+ * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
+ * SCSI commands.
+ * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
+ * SCSI commands may be submitted to the controller.
+ * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
+ * newly submitted SCSI commands with error code DID_BAD_TARGET.
+ * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
+ * failed. Fail all SCSI commands with error code DID_ERROR.
+ */
+enum ufshcd_state {
+ UFSHCD_STATE_RESET,
+ UFSHCD_STATE_OPERATIONAL,
+ UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
+ UFSHCD_STATE_EH_SCHEDULED_FATAL,
+ UFSHCD_STATE_ERROR,
+};
+
+enum ufshcd_quirks {
+ /* Interrupt aggregation support is broken */
+ UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0,
+
+ /*
+ * delay before each dme command is required as the unipro
+ * layer has shown instabilities
+ */
+ UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1,
+
+ /*
+ * If UFS host controller is having issue in processing LCC (Line
+ * Control Command) coming from device then enable this quirk.
+ * When this quirk is enabled, host controller driver should disable
+ * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
+ * attribute of device to 0).
+ */
+ UFSHCD_QUIRK_BROKEN_LCC = 1 << 2,
+
+ /*
+ * The attribute PA_RXHSUNTERMCAP specifies whether or not the
+ * inbound Link supports unterminated line in HS mode. Setting this
+ * attribute to 1 fixes moving to HS gear.
+ */
+ UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3,
+
+ /*
+ * This quirk needs to be enabled if the host controller only allows
+ * accessing the peer dme attributes in AUTO mode (FAST AUTO or
+ * SLOW AUTO).
+ */
+ UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4,
+
+ /*
+ * This quirk needs to be enabled if the host controller doesn't
+ * advertise the correct version in UFS_VER register. If this quirk
+ * is enabled, standard UFS host driver will call the vendor specific
+ * ops (get_ufs_hci_version) to get the correct version.
+ */
+ UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5,
+
+ /*
+ * Clear handling for transfer/task request list is just opposite.
+ */
+ UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6,
+
+ /*
+ * This quirk needs to be enabled if host controller doesn't allow
+ * that the interrupt aggregation timer and counter are reset by s/w.
+ */
+ UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7,
+
+ /*
+ * This quirks needs to be enabled if host controller cannot be
+ * enabled via HCE register.
+ */
+ UFSHCI_QUIRK_BROKEN_HCE = 1 << 8,
+
+ /*
+ * This quirk needs to be enabled if the host controller regards
+ * resolution of the values of PRDTO and PRDTL in UTRD as byte.
+ */
+ UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9,
+
+ /*
+ * This quirk needs to be enabled if the host controller reports
+ * OCS FATAL ERROR with device error through sense data
+ */
+ UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10,
+
+ /*
+ * This quirk needs to be enabled if the host controller has
+ * auto-hibernate capability but it doesn't work.
+ */
+ UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11,
+
+ /*
+ * This quirk needs to disable manual flush for write booster
+ */
+ UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12,
+
+ /*
+ * This quirk needs to disable unipro timeout values
+ * before power mode change
+ */
+ UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
+
+ /*
+ * Align DMA SG entries on a 4 KiB boundary.
+ */
+ UFSHCD_QUIRK_4KB_DMA_ALIGNMENT = 1 << 14,
+
+ /*
+ * This quirk needs to be enabled if the host controller does not
+ * support UIC command
+ */
+ UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15,
+
+ /*
+ * This quirk needs to be enabled if the host controller cannot
+ * support physical host configuration.
+ */
+ UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16,
+
+ /*
+ * This quirk needs to be enabled if the host controller has
+ * 64-bit addressing supported capability but it doesn't work.
+ */
+ UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS = 1 << 17,
+
+ /*
+ * This quirk needs to be enabled if the host controller has
+ * auto-hibernate capability but it's FASTAUTO only.
+ */
+ UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18,
+};
+
+enum ufshcd_caps {
+ /* Allow dynamic clk gating */
+ UFSHCD_CAP_CLK_GATING = 1 << 0,
+
+ /* Allow hiberb8 with clk gating */
+ UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1,
+
+ /* Allow dynamic clk scaling */
+ UFSHCD_CAP_CLK_SCALING = 1 << 2,
+
+ /* Allow auto bkops to enabled during runtime suspend */
+ UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3,
+
+ /*
+ * This capability allows host controller driver to use the UFS HCI's
+ * interrupt aggregation capability.
+ * CAUTION: Enabling this might reduce overall UFS throughput.
+ */
+ UFSHCD_CAP_INTR_AGGR = 1 << 4,
+
+ /*
+ * This capability allows the device auto-bkops to be always enabled
+ * except during suspend (both runtime and suspend).
+ * Enabling this capability means that device will always be allowed
+ * to do background operation when it's active but it might degrade
+ * the performance of ongoing read/write operations.
+ */
+ UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
+
+ /*
+ * This capability allows host controller driver to automatically
+ * enable runtime power management by itself instead of waiting
+ * for userspace to control the power management.
+ */
+ UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6,
+
+ /*
+ * This capability allows the host controller driver to turn-on
+ * WriteBooster, if the underlying device supports it and is
+ * provisioned to be used. This would increase the write performance.
+ */
+ UFSHCD_CAP_WB_EN = 1 << 7,
+
+ /*
+ * This capability allows the host controller driver to use the
+ * inline crypto engine, if it is present
+ */
+ UFSHCD_CAP_CRYPTO = 1 << 8,
+
+ /*
+ * This capability allows the controller regulators to be put into
+ * lpm mode aggressively during clock gating.
+ * This would increase power savings.
+ */
+ UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9,
+
+ /*
+ * This capability allows the host controller driver to use DeepSleep,
+ * if it is supported by the UFS device. The host controller driver must
+ * support device hardware reset via the hba->device_reset() callback,
+ * in order to exit DeepSleep state.
+ */
+ UFSHCD_CAP_DEEPSLEEP = 1 << 10,
+
+ /*
+ * This capability allows the host controller driver to use temperature
+ * notification if it is supported by the UFS device.
+ */
+ UFSHCD_CAP_TEMP_NOTIF = 1 << 11,
+
+ /*
+ * Enable WriteBooster when scaling up the clock and disable
+ * WriteBooster when scaling the clock down.
+ */
+ UFSHCD_CAP_WB_WITH_CLK_SCALING = 1 << 12,
+};
+
+struct ufs_hba_variant_params {
+ struct devfreq_dev_profile devfreq_profile;
+ struct devfreq_simple_ondemand_data ondemand_data;
+ u16 hba_enable_delay_us;
+ u32 wb_flush_threshold;
+};
+
+#ifdef CONFIG_SCSI_UFS_HPB
+/**
+ * struct ufshpb_dev_info - UFSHPB device related info
+ * @num_lu: the number of user logical unit to check whether all lu finished
+ * initialization
+ * @rgn_size: device reported HPB region size
+ * @srgn_size: device reported HPB sub-region size
+ * @slave_conf_cnt: counter to check all lu finished initialization
+ * @hpb_disabled: flag to check if HPB is disabled
+ * @max_hpb_single_cmd: device reported bMAX_DATA_SIZE_FOR_SINGLE_CMD value
+ * @is_legacy: flag to check HPB 1.0
+ * @control_mode: either host or device
+ */
+struct ufshpb_dev_info {
+ int num_lu;
+ int rgn_size;
+ int srgn_size;
+ atomic_t slave_conf_cnt;
+ bool hpb_disabled;
+ u8 max_hpb_single_cmd;
+ bool is_legacy;
+ u8 control_mode;
+};
+#endif
+
+struct ufs_hba_monitor {
+ unsigned long chunk_size;
+
+ unsigned long nr_sec_rw[2];
+ ktime_t total_busy[2];
+
+ unsigned long nr_req[2];
+ /* latencies*/
+ ktime_t lat_sum[2];
+ ktime_t lat_max[2];
+ ktime_t lat_min[2];
+
+ u32 nr_queued[2];
+ ktime_t busy_start_ts[2];
+
+ ktime_t enabled_ts;
+ bool enabled;
+};
+
+/**
+ * struct ufs_hba - per adapter private structure
+ * @mmio_base: UFSHCI base register address
+ * @ucdl_base_addr: UFS Command Descriptor base address
+ * @utrdl_base_addr: UTP Transfer Request Descriptor base address
+ * @utmrdl_base_addr: UTP Task Management Descriptor base address
+ * @ucdl_dma_addr: UFS Command Descriptor DMA address
+ * @utrdl_dma_addr: UTRDL DMA address
+ * @utmrdl_dma_addr: UTMRDL DMA address
+ * @host: Scsi_Host instance of the driver
+ * @dev: device handle
+ * @ufs_device_wlun: WLUN that controls the entire UFS device.
+ * @hwmon_device: device instance registered with the hwmon core.
+ * @curr_dev_pwr_mode: active UFS device power mode.
+ * @uic_link_state: active state of the link to the UFS device.
+ * @rpm_lvl: desired UFS power management level during runtime PM.
+ * @spm_lvl: desired UFS power management level during system PM.
+ * @pm_op_in_progress: whether or not a PM operation is in progress.
+ * @ahit: value of Auto-Hibernate Idle Timer register.
+ * @lrb: local reference block
+ * @outstanding_tasks: Bits representing outstanding task requests
+ * @outstanding_lock: Protects @outstanding_reqs.
+ * @outstanding_reqs: Bits representing outstanding transfer requests
+ * @capabilities: UFS Controller Capabilities
+ * @nutrs: Transfer Request Queue depth supported by controller
+ * @nutmrs: Task Management Queue depth supported by controller
+ * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
+ * @ufs_version: UFS Version to which controller complies
+ * @vops: pointer to variant specific operations
+ * @vps: pointer to variant specific parameters
+ * @priv: pointer to variant specific private data
+ * @irq: Irq number of the controller
+ * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
+ * @dev_ref_clk_freq: reference clock frequency
+ * @quirks: bitmask with information about deviations from the UFSHCI standard.
+ * @dev_quirks: bitmask with information about deviations from the UFS standard.
+ * @tmf_tag_set: TMF tag set.
+ * @tmf_queue: Used to allocate TMF tags.
+ * @tmf_rqs: array with pointers to TMF requests while these are in progress.
+ * @active_uic_cmd: handle of active UIC command
+ * @uic_cmd_mutex: mutex for UIC command
+ * @uic_async_done: completion used during UIC processing
+ * @ufshcd_state: UFSHCD state
+ * @eh_flags: Error handling flags
+ * @intr_mask: Interrupt Mask Bits
+ * @ee_ctrl_mask: Exception event control mask
+ * @ee_drv_mask: Exception event mask for driver
+ * @ee_usr_mask: Exception event mask for user (set via debugfs)
+ * @ee_ctrl_mutex: Used to serialize exception event information.
+ * @is_powered: flag to check if HBA is powered
+ * @shutting_down: flag to check if shutdown has been invoked
+ * @host_sem: semaphore used to serialize concurrent contexts
+ * @eh_wq: Workqueue that eh_work works on
+ * @eh_work: Worker to handle UFS errors that require s/w attention
+ * @eeh_work: Worker to handle exception events
+ * @errors: HBA errors
+ * @uic_error: UFS interconnect layer error status
+ * @saved_err: sticky error mask
+ * @saved_uic_err: sticky UIC error mask
+ * @ufs_stats: various error counters
+ * @force_reset: flag to force eh_work perform a full reset
+ * @force_pmc: flag to force a power mode change
+ * @silence_err_logs: flag to silence error logs
+ * @dev_cmd: ufs device management command information
+ * @last_dme_cmd_tstamp: time stamp of the last completed DME command
+ * @nop_out_timeout: NOP OUT timeout value
+ * @dev_info: information about the UFS device
+ * @auto_bkops_enabled: to track whether bkops is enabled in device
+ * @vreg_info: UFS device voltage regulator information
+ * @clk_list_head: UFS host controller clocks list node head
+ * @req_abort_count: number of times ufshcd_abort() has been called
+ * @lanes_per_direction: number of lanes per data direction between the UFS
+ * controller and the UFS device.
+ * @pwr_info: holds current power mode
+ * @max_pwr_info: keeps the device max valid pwm
+ * @clk_gating: information related to clock gating
+ * @caps: bitmask with information about UFS controller capabilities
+ * @devfreq: frequency scaling information owned by the devfreq core
+ * @clk_scaling: frequency scaling information owned by the UFS driver
+ * @is_sys_suspended: whether or not the entire system has been suspended
+ * @urgent_bkops_lvl: keeps track of urgent bkops level for device
+ * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
+ * device is known or not.
+ * @wb_mutex: used to serialize devfreq and sysfs write booster toggling
+ * @clk_scaling_lock: used to serialize device commands and clock scaling
+ * @desc_size: descriptor sizes reported by device
+ * @scsi_block_reqs_cnt: reference counting for scsi block requests
+ * @bsg_dev: struct device associated with the BSG queue
+ * @bsg_queue: BSG queue associated with the UFS controller
+ * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
+ * management) after the UFS device has finished a WriteBooster buffer
+ * flush or auto BKOP.
+ * @ufshpb_dev: information related to HPB (Host Performance Booster).
+ * @monitor: statistics about UFS commands
+ * @crypto_capabilities: Content of crypto capabilities register (0x100)
+ * @crypto_cap_array: Array of crypto capabilities
+ * @crypto_cfg_register: Start of the crypto cfg array
+ * @crypto_profile: the crypto profile of this hba (if applicable)
+ * @debugfs_root: UFS controller debugfs root directory
+ * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
+ * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
+ * ee_ctrl_mask
+ * @luns_avail: number of regular and well known LUNs supported by the UFS
+ * device
+ * @complete_put: whether or not to call ufshcd_rpm_put() from inside
+ * ufshcd_resume_complete()
+ */
+struct ufs_hba {
+ void __iomem *mmio_base;
+
+ /* Virtual memory reference */
+ struct utp_transfer_cmd_desc *ucdl_base_addr;
+ struct utp_transfer_req_desc *utrdl_base_addr;
+ struct utp_task_req_desc *utmrdl_base_addr;
+
+ /* DMA memory reference */
+ dma_addr_t ucdl_dma_addr;
+ dma_addr_t utrdl_dma_addr;
+ dma_addr_t utmrdl_dma_addr;
+
+ struct Scsi_Host *host;
+ struct device *dev;
+ struct scsi_device *ufs_device_wlun;
+
+#ifdef CONFIG_SCSI_UFS_HWMON
+ struct device *hwmon_device;
+#endif
+
+ enum ufs_dev_pwr_mode curr_dev_pwr_mode;
+ enum uic_link_state uic_link_state;
+ /* Desired UFS power management level during runtime PM */
+ enum ufs_pm_level rpm_lvl;
+ /* Desired UFS power management level during system PM */
+ enum ufs_pm_level spm_lvl;
+ int pm_op_in_progress;
+
+ /* Auto-Hibernate Idle Timer register value */
+ u32 ahit;
+
+ struct ufshcd_lrb *lrb;
+
+ unsigned long outstanding_tasks;
+ spinlock_t outstanding_lock;
+ unsigned long outstanding_reqs;
+
+ u32 capabilities;
+ int nutrs;
+ int nutmrs;
+ u32 reserved_slot;
+ u32 ufs_version;
+ const struct ufs_hba_variant_ops *vops;
+ struct ufs_hba_variant_params *vps;
+ void *priv;
+ unsigned int irq;
+ bool is_irq_enabled;
+ enum ufs_ref_clk_freq dev_ref_clk_freq;
+
+ unsigned int quirks; /* Deviations from standard UFSHCI spec. */
+
+ /* Device deviations from standard UFS device spec. */
+ unsigned int dev_quirks;
+
+ struct blk_mq_tag_set tmf_tag_set;
+ struct request_queue *tmf_queue;
+ struct request **tmf_rqs;
+
+ struct uic_command *active_uic_cmd;
+ struct mutex uic_cmd_mutex;
+ struct completion *uic_async_done;
+
+ enum ufshcd_state ufshcd_state;
+ u32 eh_flags;
+ u32 intr_mask;
+ u16 ee_ctrl_mask;
+ u16 ee_drv_mask;
+ u16 ee_usr_mask;
+ struct mutex ee_ctrl_mutex;
+ bool is_powered;
+ bool shutting_down;
+ struct semaphore host_sem;
+
+ /* Work Queues */
+ struct workqueue_struct *eh_wq;
+ struct work_struct eh_work;
+ struct work_struct eeh_work;
+
+ /* HBA Errors */
+ u32 errors;
+ u32 uic_error;
+ u32 saved_err;
+ u32 saved_uic_err;
+ struct ufs_stats ufs_stats;
+ bool force_reset;
+ bool force_pmc;
+ bool silence_err_logs;
+
+ /* Device management request data */
+ struct ufs_dev_cmd dev_cmd;
+ ktime_t last_dme_cmd_tstamp;
+ int nop_out_timeout;
+
+ /* Keeps information of the UFS device connected to this host */
+ struct ufs_dev_info dev_info;
+ bool auto_bkops_enabled;
+ struct ufs_vreg_info vreg_info;
+ struct list_head clk_list_head;
+
+ /* Number of requests aborts */
+ int req_abort_count;
+
+ /* Number of lanes available (1 or 2) for Rx/Tx */
+ u32 lanes_per_direction;
+ struct ufs_pa_layer_attr pwr_info;
+ struct ufs_pwr_mode_info max_pwr_info;
+
+ struct ufs_clk_gating clk_gating;
+ /* Control to enable/disable host capabilities */
+ u32 caps;
+
+ struct devfreq *devfreq;
+ struct ufs_clk_scaling clk_scaling;
+ bool is_sys_suspended;
+
+ enum bkops_status urgent_bkops_lvl;
+ bool is_urgent_bkops_lvl_checked;
+
+ struct mutex wb_mutex;
+ struct rw_semaphore clk_scaling_lock;
+ unsigned char desc_size[QUERY_DESC_IDN_MAX];
+ atomic_t scsi_block_reqs_cnt;
+
+ struct device bsg_dev;
+ struct request_queue *bsg_queue;
+ struct delayed_work rpm_dev_flush_recheck_work;
+
+#ifdef CONFIG_SCSI_UFS_HPB
+ struct ufshpb_dev_info ufshpb_dev;
+#endif
+
+ struct ufs_hba_monitor monitor;
+
+#ifdef CONFIG_SCSI_UFS_CRYPTO
+ union ufs_crypto_capabilities crypto_capabilities;
+ union ufs_crypto_cap_entry *crypto_cap_array;
+ u32 crypto_cfg_register;
+ struct blk_crypto_profile crypto_profile;
+#endif
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs_root;
+ struct delayed_work debugfs_ee_work;
+ u32 debugfs_ee_rate_limit_ms;
+#endif
+ u32 luns_avail;
+ bool complete_put;
+};
+
+/* Returns true if clocks can be gated. Otherwise false */
+static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_CLK_GATING;
+}
+static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+}
+static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_CLK_SCALING;
+}
+static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+}
+static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
+}
+
+static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
+{
+ return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
+ !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
+}
+
+static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
+{
+ return !!(ufshcd_is_link_hibern8(hba) &&
+ (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
+}
+
+static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
+{
+ return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
+ !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
+}
+
+static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
+{
+ return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
+}
+
+static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_WB_EN;
+}
+
+static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba)
+{
+ return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING;
+}
+
+#define ufshcd_writel(hba, val, reg) \
+ writel((val), (hba)->mmio_base + (reg))
+#define ufshcd_readl(hba, reg) \
+ readl((hba)->mmio_base + (reg))
+
+/**
+ * ufshcd_rmwl - perform read/modify/write for a controller register
+ * @hba: per adapter instance
+ * @mask: mask to apply on read value
+ * @val: actual value to write
+ * @reg: register address
+ */
+static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
+{
+ u32 tmp;
+
+ tmp = ufshcd_readl(hba, reg);
+ tmp &= ~mask;
+ tmp |= (val & mask);
+ ufshcd_writel(hba, tmp, reg);
+}
+
+int ufshcd_alloc_host(struct device *, struct ufs_hba **);
+void ufshcd_dealloc_host(struct ufs_hba *);
+int ufshcd_hba_enable(struct ufs_hba *hba);
+int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
+int ufshcd_link_recovery(struct ufs_hba *hba);
+int ufshcd_make_hba_operational(struct ufs_hba *hba);
+void ufshcd_remove(struct ufs_hba *);
+int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
+int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
+void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
+void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
+void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
+void ufshcd_hba_stop(struct ufs_hba *hba);
+void ufshcd_schedule_eh_work(struct ufs_hba *hba);
+
+static inline void check_upiu_size(void)
+{
+ BUILD_BUG_ON(ALIGNED_UPIU_SIZE <
+ GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE);
+}
+
+/**
+ * ufshcd_set_variant - set variant specific data to the hba
+ * @hba: per adapter instance
+ * @variant: pointer to variant specific data
+ */
+static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
+{
+ BUG_ON(!hba);
+ hba->priv = variant;
+}
+
+/**
+ * ufshcd_get_variant - get variant specific data from the hba
+ * @hba: per adapter instance
+ */
+static inline void *ufshcd_get_variant(struct ufs_hba *hba)
+{
+ BUG_ON(!hba);
+ return hba->priv;
+}
+
+#ifdef CONFIG_PM
+extern int ufshcd_runtime_suspend(struct device *dev);
+extern int ufshcd_runtime_resume(struct device *dev);
+#endif
+#ifdef CONFIG_PM_SLEEP
+extern int ufshcd_system_suspend(struct device *dev);
+extern int ufshcd_system_resume(struct device *dev);
+#endif
+extern int ufshcd_shutdown(struct ufs_hba *hba);
+extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
+ int agreed_gear,
+ int adapt_val);
+extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
+ u8 attr_set, u32 mib_val, u8 peer);
+extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
+ u32 *mib_val, u8 peer);
+extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *desired_pwr_mode);
+extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
+
+/* UIC command interfaces for DME primitives */
+#define DME_LOCAL 0
+#define DME_PEER 1
+#define ATTR_SET_NOR 0 /* NORMAL */
+#define ATTR_SET_ST 1 /* STATIC */
+
+static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+ mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
+ mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
+ u32 mib_val)
+{
+ return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
+ mib_val, DME_PEER);
+}
+
+static inline int ufshcd_dme_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
+}
+
+static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
+ u32 attr_sel, u32 *mib_val)
+{
+ return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
+}
+
+static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
+{
+ return (pwr_info->pwr_rx == FAST_MODE ||
+ pwr_info->pwr_rx == FASTAUTO_MODE) &&
+ (pwr_info->pwr_tx == FAST_MODE ||
+ pwr_info->pwr_tx == FASTAUTO_MODE);
+}
+
+static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
+{
+ return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
+}
+
+void ufshcd_auto_hibern8_enable(struct ufs_hba *hba);
+void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
+void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
+ const struct ufs_dev_quirk *fixups);
+#define SD_ASCII_STD true
+#define SD_RAW false
+int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
+ u8 **buf, bool ascii);
+
+int ufshcd_hold(struct ufs_hba *hba, bool async);
+void ufshcd_release(struct ufs_hba *hba);
+
+void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
+
+void ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
+ int *desc_length);
+
+u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
+
+int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
+
+int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
+
+int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
+ struct utp_upiu_req *req_upiu,
+ struct utp_upiu_req *rsp_upiu,
+ int msgcode,
+ u8 *desc_buff, int *buff_len,
+ enum query_opcode desc_op);
+
+int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
+int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable);
+int ufshcd_suspend_prepare(struct device *dev);
+int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
+void ufshcd_resume_complete(struct device *dev);
+
+/* Wrapper functions for safely calling variant operations */
+static inline int ufshcd_vops_init(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->init)
+ return hba->vops->init(hba);
+
+ return 0;
+}
+
+static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->phy_initialization)
+ return hba->vops->phy_initialization(hba);
+
+ return 0;
+}
+
+extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
+
+int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
+ const char *prefix);
+
+int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
+int ufshcd_write_ee_control(struct ufs_hba *hba);
+int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask,
+ const u16 *other_mask, u16 set, u16 clr);
+
+#endif /* End of Header */
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
new file mode 100644
index 000000000..f525566a0
--- /dev/null
+++ b/include/ufs/ufshci.h
@@ -0,0 +1,506 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Universal Flash Storage Host controller driver
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ */
+
+#ifndef _UFSHCI_H
+#define _UFSHCI_H
+
+#include <scsi/scsi_host.h>
+
+enum {
+ TASK_REQ_UPIU_SIZE_DWORDS = 8,
+ TASK_RSP_UPIU_SIZE_DWORDS = 8,
+ ALIGNED_UPIU_SIZE = 512,
+};
+
+/* UFSHCI Registers */
+enum {
+ REG_CONTROLLER_CAPABILITIES = 0x00,
+ REG_UFS_VERSION = 0x08,
+ REG_CONTROLLER_DEV_ID = 0x10,
+ REG_CONTROLLER_PROD_ID = 0x14,
+ REG_AUTO_HIBERNATE_IDLE_TIMER = 0x18,
+ REG_INTERRUPT_STATUS = 0x20,
+ REG_INTERRUPT_ENABLE = 0x24,
+ REG_CONTROLLER_STATUS = 0x30,
+ REG_CONTROLLER_ENABLE = 0x34,
+ REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
+ REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
+ REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
+ REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
+ REG_UIC_ERROR_CODE_DME = 0x48,
+ REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
+ REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
+ REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
+ REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
+ REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
+ REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
+ REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
+ REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
+ REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
+ REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
+ REG_UIC_COMMAND = 0x90,
+ REG_UIC_COMMAND_ARG_1 = 0x94,
+ REG_UIC_COMMAND_ARG_2 = 0x98,
+ REG_UIC_COMMAND_ARG_3 = 0x9C,
+
+ UFSHCI_REG_SPACE_SIZE = 0xA0,
+
+ REG_UFS_CCAP = 0x100,
+ REG_UFS_CRYPTOCAP = 0x104,
+
+ UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
+};
+
+/* Controller capability masks */
+enum {
+ MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
+ MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
+ MASK_AUTO_HIBERN8_SUPPORT = 0x00800000,
+ MASK_64_ADDRESSING_SUPPORT = 0x01000000,
+ MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
+ MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
+ MASK_CRYPTO_SUPPORT = 0x10000000,
+};
+
+#define UFS_MASK(mask, offset) ((mask) << (offset))
+
+/* UFS Version 08h */
+#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
+#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
+
+/*
+ * Controller UFSHCI version
+ * - 2.x and newer use the following scheme:
+ * major << 8 + minor << 4
+ * - 1.x has been converted to match this in
+ * ufshcd_get_ufs_version()
+ */
+static inline u32 ufshci_version(u32 major, u32 minor)
+{
+ return (major << 8) + (minor << 4);
+}
+
+/*
+ * HCDDID - Host Controller Identification Descriptor
+ * - Device ID and Device Class 10h
+ */
+#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
+#define DEVICE_ID UFS_MASK(0xFF, 24)
+
+/*
+ * HCPMID - Host Controller Identification Descriptor
+ * - Product/Manufacturer ID 14h
+ */
+#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
+#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFSHCI_AHIBERN8_TIMER_MASK GENMASK(9, 0)
+#define UFSHCI_AHIBERN8_SCALE_MASK GENMASK(12, 10)
+#define UFSHCI_AHIBERN8_SCALE_FACTOR 10
+#define UFSHCI_AHIBERN8_MAX (1023 * 100000)
+
+/*
+ * IS - Interrupt Status - 20h
+ */
+#define UTP_TRANSFER_REQ_COMPL 0x1
+#define UIC_DME_END_PT_RESET 0x2
+#define UIC_ERROR 0x4
+#define UIC_TEST_MODE 0x8
+#define UIC_POWER_MODE 0x10
+#define UIC_HIBERNATE_EXIT 0x20
+#define UIC_HIBERNATE_ENTER 0x40
+#define UIC_LINK_LOST 0x80
+#define UIC_LINK_STARTUP 0x100
+#define UTP_TASK_REQ_COMPL 0x200
+#define UIC_COMMAND_COMPL 0x400
+#define DEVICE_FATAL_ERROR 0x800
+#define CONTROLLER_FATAL_ERROR 0x10000
+#define SYSTEM_BUS_FATAL_ERROR 0x20000
+#define CRYPTO_ENGINE_FATAL_ERROR 0x40000
+
+#define UFSHCD_UIC_HIBERN8_MASK (UIC_HIBERNATE_ENTER |\
+ UIC_HIBERNATE_EXIT)
+
+#define UFSHCD_UIC_PWR_MASK (UFSHCD_UIC_HIBERN8_MASK |\
+ UIC_POWER_MODE)
+
+#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK)
+
+#define UFSHCD_ERROR_MASK (UIC_ERROR | INT_FATAL_ERRORS)
+
+#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
+ CONTROLLER_FATAL_ERROR |\
+ SYSTEM_BUS_FATAL_ERROR |\
+ CRYPTO_ENGINE_FATAL_ERROR |\
+ UIC_LINK_LOST)
+
+/* HCS - Host Controller Status 30h */
+#define DEVICE_PRESENT 0x1
+#define UTP_TRANSFER_REQ_LIST_READY 0x2
+#define UTP_TASK_REQ_LIST_READY 0x4
+#define UIC_COMMAND_READY 0x8
+#define HOST_ERROR_INDICATOR 0x10
+#define DEVICE_ERROR_INDICATOR 0x20
+#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
+
+#define UFSHCD_STATUS_READY (UTP_TRANSFER_REQ_LIST_READY |\
+ UTP_TASK_REQ_LIST_READY |\
+ UIC_COMMAND_READY)
+
+enum {
+ PWR_OK = 0x0,
+ PWR_LOCAL = 0x01,
+ PWR_REMOTE = 0x02,
+ PWR_BUSY = 0x03,
+ PWR_ERROR_CAP = 0x04,
+ PWR_FATAL_ERROR = 0x05,
+};
+
+/* HCE - Host Controller Enable 34h */
+#define CONTROLLER_ENABLE 0x1
+#define CONTROLLER_DISABLE 0x0
+#define CRYPTO_GENERAL_ENABLE 0x2
+
+/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
+#define UIC_PHY_ADAPTER_LAYER_ERROR 0x80000000
+#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
+#define UIC_PHY_ADAPTER_LAYER_LANE_ERR_MASK 0xF
+#define UIC_PHY_ADAPTER_LAYER_GENERIC_ERROR 0x10
+
+/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
+#define UIC_DATA_LINK_LAYER_ERROR 0x80000000
+#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0xFFFF
+#define UIC_DATA_LINK_LAYER_ERROR_TCX_REP_TIMER_EXP 0x2
+#define UIC_DATA_LINK_LAYER_ERROR_AFCX_REQ_TIMER_EXP 0x4
+#define UIC_DATA_LINK_LAYER_ERROR_FCX_PRO_TIMER_EXP 0x8
+#define UIC_DATA_LINK_LAYER_ERROR_RX_BUF_OF 0x20
+#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
+#define UIC_DATA_LINK_LAYER_ERROR_NAC_RECEIVED 0x0001
+#define UIC_DATA_LINK_LAYER_ERROR_TCx_REPLAY_TIMEOUT 0x0002
+
+/* UECN - Host UIC Error Code Network Layer 40h */
+#define UIC_NETWORK_LAYER_ERROR 0x80000000
+#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
+#define UIC_NETWORK_UNSUPPORTED_HEADER_TYPE 0x1
+#define UIC_NETWORK_BAD_DEVICEID_ENC 0x2
+#define UIC_NETWORK_LHDR_TRAP_PACKET_DROPPING 0x4
+
+/* UECT - Host UIC Error Code Transport Layer 44h */
+#define UIC_TRANSPORT_LAYER_ERROR 0x80000000
+#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
+#define UIC_TRANSPORT_UNSUPPORTED_HEADER_TYPE 0x1
+#define UIC_TRANSPORT_UNKNOWN_CPORTID 0x2
+#define UIC_TRANSPORT_NO_CONNECTION_RX 0x4
+#define UIC_TRANSPORT_CONTROLLED_SEGMENT_DROPPING 0x8
+#define UIC_TRANSPORT_BAD_TC 0x10
+#define UIC_TRANSPORT_E2E_CREDIT_OVERFOW 0x20
+#define UIC_TRANSPORT_SAFETY_VALUE_DROPPING 0x40
+
+/* UECDME - Host UIC Error Code DME 48h */
+#define UIC_DME_ERROR 0x80000000
+#define UIC_DME_ERROR_CODE_MASK 0x1
+
+/* UTRIACR - Interrupt Aggregation control register - 0x4Ch */
+#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
+#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
+#define INT_AGGR_COUNTER_AND_TIMER_RESET 0x10000
+#define INT_AGGR_STATUS_BIT 0x100000
+#define INT_AGGR_PARAM_WRITE 0x1000000
+#define INT_AGGR_ENABLE 0x80000000
+
+/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
+#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT 0x1
+
+/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
+#define UTP_TASK_REQ_LIST_RUN_STOP_BIT 0x1
+
+/* UICCMD - UIC Command */
+#define COMMAND_OPCODE_MASK 0xFF
+#define GEN_SELECTOR_INDEX_MASK 0xFFFF
+
+#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
+#define RESET_LEVEL 0xFF
+
+#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
+#define CONFIG_RESULT_CODE_MASK 0xFF
+#define GENERIC_ERROR_CODE_MASK 0xFF
+
+/* GenSelectorIndex calculation macros for M-PHY attributes */
+#define UIC_ARG_MPHY_TX_GEN_SEL_INDEX(lane) (lane)
+#define UIC_ARG_MPHY_RX_GEN_SEL_INDEX(lane) (PA_MAXDATALANES + (lane))
+
+#define UIC_ARG_MIB_SEL(attr, sel) ((((attr) & 0xFFFF) << 16) |\
+ ((sel) & 0xFFFF))
+#define UIC_ARG_MIB(attr) UIC_ARG_MIB_SEL(attr, 0)
+#define UIC_ARG_ATTR_TYPE(t) (((t) & 0xFF) << 16)
+#define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF)
+
+/* Link Status*/
+enum link_status {
+ UFSHCD_LINK_IS_DOWN = 1,
+ UFSHCD_LINK_IS_UP = 2,
+};
+
+/* UIC Commands */
+enum uic_cmd_dme {
+ UIC_CMD_DME_GET = 0x01,
+ UIC_CMD_DME_SET = 0x02,
+ UIC_CMD_DME_PEER_GET = 0x03,
+ UIC_CMD_DME_PEER_SET = 0x04,
+ UIC_CMD_DME_POWERON = 0x10,
+ UIC_CMD_DME_POWEROFF = 0x11,
+ UIC_CMD_DME_ENABLE = 0x12,
+ UIC_CMD_DME_RESET = 0x14,
+ UIC_CMD_DME_END_PT_RST = 0x15,
+ UIC_CMD_DME_LINK_STARTUP = 0x16,
+ UIC_CMD_DME_HIBER_ENTER = 0x17,
+ UIC_CMD_DME_HIBER_EXIT = 0x18,
+ UIC_CMD_DME_TEST_MODE = 0x1A,
+};
+
+/* UIC Config result code / Generic error code */
+enum {
+ UIC_CMD_RESULT_SUCCESS = 0x00,
+ UIC_CMD_RESULT_INVALID_ATTR = 0x01,
+ UIC_CMD_RESULT_FAILURE = 0x01,
+ UIC_CMD_RESULT_INVALID_ATTR_VALUE = 0x02,
+ UIC_CMD_RESULT_READ_ONLY_ATTR = 0x03,
+ UIC_CMD_RESULT_WRITE_ONLY_ATTR = 0x04,
+ UIC_CMD_RESULT_BAD_INDEX = 0x05,
+ UIC_CMD_RESULT_LOCKED_ATTR = 0x06,
+ UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX = 0x07,
+ UIC_CMD_RESULT_PEER_COMM_FAILURE = 0x08,
+ UIC_CMD_RESULT_BUSY = 0x09,
+ UIC_CMD_RESULT_DME_FAILURE = 0x0A,
+};
+
+#define MASK_UIC_COMMAND_RESULT 0xFF
+
+#define INT_AGGR_COUNTER_THLD_VAL(c) (((c) & 0x1F) << 8)
+#define INT_AGGR_TIMEOUT_VAL(t) (((t) & 0xFF) << 0)
+
+/* Interrupt disable masks */
+enum {
+ /* Interrupt disable mask for UFSHCI v1.0 */
+ INTERRUPT_MASK_ALL_VER_10 = 0x30FFF,
+ INTERRUPT_MASK_RW_VER_10 = 0x30000,
+
+ /* Interrupt disable mask for UFSHCI v1.1 */
+ INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
+
+ /* Interrupt disable mask for UFSHCI v2.1 */
+ INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
+};
+
+/* CCAP - Crypto Capability 100h */
+union ufs_crypto_capabilities {
+ __le32 reg_val;
+ struct {
+ u8 num_crypto_cap;
+ u8 config_count;
+ u8 reserved;
+ u8 config_array_ptr;
+ };
+};
+
+enum ufs_crypto_key_size {
+ UFS_CRYPTO_KEY_SIZE_INVALID = 0x0,
+ UFS_CRYPTO_KEY_SIZE_128 = 0x1,
+ UFS_CRYPTO_KEY_SIZE_192 = 0x2,
+ UFS_CRYPTO_KEY_SIZE_256 = 0x3,
+ UFS_CRYPTO_KEY_SIZE_512 = 0x4,
+};
+
+enum ufs_crypto_alg {
+ UFS_CRYPTO_ALG_AES_XTS = 0x0,
+ UFS_CRYPTO_ALG_BITLOCKER_AES_CBC = 0x1,
+ UFS_CRYPTO_ALG_AES_ECB = 0x2,
+ UFS_CRYPTO_ALG_ESSIV_AES_CBC = 0x3,
+};
+
+/* x-CRYPTOCAP - Crypto Capability X */
+union ufs_crypto_cap_entry {
+ __le32 reg_val;
+ struct {
+ u8 algorithm_id;
+ u8 sdus_mask; /* Supported data unit size mask */
+ u8 key_size;
+ u8 reserved;
+ };
+};
+
+#define UFS_CRYPTO_CONFIGURATION_ENABLE (1 << 7)
+#define UFS_CRYPTO_KEY_MAX_SIZE 64
+/* x-CRYPTOCFG - Crypto Configuration X */
+union ufs_crypto_cfg_entry {
+ __le32 reg_val[32];
+ struct {
+ u8 crypto_key[UFS_CRYPTO_KEY_MAX_SIZE];
+ u8 data_unit_size;
+ u8 crypto_cap_idx;
+ u8 reserved_1;
+ u8 config_enable;
+ u8 reserved_multi_host;
+ u8 reserved_2;
+ u8 vsb[2];
+ u8 reserved_3[56];
+ };
+};
+
+/*
+ * Request Descriptor Definitions
+ */
+
+/* Transfer request command type */
+enum {
+ UTP_CMD_TYPE_SCSI = 0x0,
+ UTP_CMD_TYPE_UFS = 0x1,
+ UTP_CMD_TYPE_DEV_MANAGE = 0x2,
+};
+
+/* To accommodate UFS2.0 required Command type */
+enum {
+ UTP_CMD_TYPE_UFS_STORAGE = 0x1,
+};
+
+enum {
+ UTP_SCSI_COMMAND = 0x00000000,
+ UTP_NATIVE_UFS_COMMAND = 0x10000000,
+ UTP_DEVICE_MANAGEMENT_FUNCTION = 0x20000000,
+ UTP_REQ_DESC_INT_CMD = 0x01000000,
+ UTP_REQ_DESC_CRYPTO_ENABLE_CMD = 0x00800000,
+};
+
+/* UTP Transfer Request Data Direction (DD) */
+enum {
+ UTP_NO_DATA_TRANSFER = 0x00000000,
+ UTP_HOST_TO_DEVICE = 0x02000000,
+ UTP_DEVICE_TO_HOST = 0x04000000,
+};
+
+/* Overall command status values */
+enum utp_ocs {
+ OCS_SUCCESS = 0x0,
+ OCS_INVALID_CMD_TABLE_ATTR = 0x1,
+ OCS_INVALID_PRDT_ATTR = 0x2,
+ OCS_MISMATCH_DATA_BUF_SIZE = 0x3,
+ OCS_MISMATCH_RESP_UPIU_SIZE = 0x4,
+ OCS_PEER_COMM_FAILURE = 0x5,
+ OCS_ABORTED = 0x6,
+ OCS_FATAL_ERROR = 0x7,
+ OCS_DEVICE_FATAL_ERROR = 0x8,
+ OCS_INVALID_CRYPTO_CONFIG = 0x9,
+ OCS_GENERAL_CRYPTO_ERROR = 0xA,
+ OCS_INVALID_COMMAND_STATUS = 0x0F,
+};
+
+enum {
+ MASK_OCS = 0x0F,
+};
+
+/* The maximum length of the data byte count field in the PRDT is 256KB */
+#define PRDT_DATA_BYTE_COUNT_MAX (256 * 1024)
+/* The granularity of the data byte count field in the PRDT is 32-bit */
+#define PRDT_DATA_BYTE_COUNT_PAD 4
+
+/**
+ * struct ufshcd_sg_entry - UFSHCI PRD Entry
+ * @addr: Physical address; DW-0 and DW-1.
+ * @reserved: Reserved for future use DW-2
+ * @size: size of physical segment DW-3
+ */
+struct ufshcd_sg_entry {
+ __le64 addr;
+ __le32 reserved;
+ __le32 size;
+};
+
+/**
+ * struct utp_transfer_cmd_desc - UTP Command Descriptor (UCD)
+ * @command_upiu: Command UPIU Frame address
+ * @response_upiu: Response UPIU Frame address
+ * @prd_table: Physical Region Descriptor
+ */
+struct utp_transfer_cmd_desc {
+ u8 command_upiu[ALIGNED_UPIU_SIZE];
+ u8 response_upiu[ALIGNED_UPIU_SIZE];
+ struct ufshcd_sg_entry prd_table[SG_ALL];
+};
+
+/**
+ * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
+ * @dword0: Descriptor Header DW0
+ * @dword1: Descriptor Header DW1
+ * @dword2: Descriptor Header DW2
+ * @dword3: Descriptor Header DW3
+ */
+struct request_desc_header {
+ __le32 dword_0;
+ __le32 dword_1;
+ __le32 dword_2;
+ __le32 dword_3;
+};
+
+/**
+ * struct utp_transfer_req_desc - UTP Transfer Request Descriptor (UTRD)
+ * @header: UTRD header DW-0 to DW-3
+ * @command_desc_base_addr_lo: UCD base address low DW-4
+ * @command_desc_base_addr_hi: UCD base address high DW-5
+ * @response_upiu_length: response UPIU length DW-6
+ * @response_upiu_offset: response UPIU offset DW-6
+ * @prd_table_length: Physical region descriptor length DW-7
+ * @prd_table_offset: Physical region descriptor offset DW-7
+ */
+struct utp_transfer_req_desc {
+
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-5*/
+ __le32 command_desc_base_addr_lo;
+ __le32 command_desc_base_addr_hi;
+
+ /* DW 6 */
+ __le16 response_upiu_length;
+ __le16 response_upiu_offset;
+
+ /* DW 7 */
+ __le16 prd_table_length;
+ __le16 prd_table_offset;
+};
+
+/*
+ * UTMRD structure.
+ */
+struct utp_task_req_desc {
+ /* DW 0-3 */
+ struct request_desc_header header;
+
+ /* DW 4-11 - Task request UPIU structure */
+ struct {
+ struct utp_upiu_header req_header;
+ __be32 input_param1;
+ __be32 input_param2;
+ __be32 input_param3;
+ __be32 __reserved1[2];
+ } upiu_req;
+
+ /* DW 12-19 - Task Management Response UPIU structure */
+ struct {
+ struct utp_upiu_header rsp_header;
+ __be32 output_param1;
+ __be32 output_param2;
+ __be32 __reserved2[3];
+ } upiu_rsp;
+};
+
+#endif /* End of Header */
diff --git a/include/ufs/unipro.h b/include/ufs/unipro.h
new file mode 100644
index 000000000..6c553f98f
--- /dev/null
+++ b/include/ufs/unipro.h
@@ -0,0 +1,316 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef _UNIPRO_H_
+#define _UNIPRO_H_
+
+/*
+ * M-TX Configuration Attributes
+ */
+#define TX_HIBERN8TIME_CAPABILITY 0x000F
+#define TX_MODE 0x0021
+#define TX_HSRATE_SERIES 0x0022
+#define TX_HSGEAR 0x0023
+#define TX_PWMGEAR 0x0024
+#define TX_AMPLITUDE 0x0025
+#define TX_HS_SLEWRATE 0x0026
+#define TX_SYNC_SOURCE 0x0027
+#define TX_HS_SYNC_LENGTH 0x0028
+#define TX_HS_PREPARE_LENGTH 0x0029
+#define TX_LS_PREPARE_LENGTH 0x002A
+#define TX_HIBERN8_CONTROL 0x002B
+#define TX_LCC_ENABLE 0x002C
+#define TX_PWM_BURST_CLOSURE_EXTENSION 0x002D
+#define TX_BYPASS_8B10B_ENABLE 0x002E
+#define TX_DRIVER_POLARITY 0x002F
+#define TX_HS_UNTERMINATED_LINE_DRIVE_ENABLE 0x0030
+#define TX_LS_TERMINATED_LINE_DRIVE_ENABLE 0x0031
+#define TX_LCC_SEQUENCER 0x0032
+#define TX_MIN_ACTIVATETIME 0x0033
+#define TX_PWM_G6_G7_SYNC_LENGTH 0x0034
+#define TX_REFCLKFREQ 0x00EB
+#define TX_CFGCLKFREQVAL 0x00EC
+#define CFGEXTRATTR 0x00F0
+#define DITHERCTRL2 0x00F1
+
+/*
+ * M-RX Configuration Attributes
+ */
+#define RX_HS_G1_SYNC_LENGTH_CAP 0x008B
+#define RX_HS_G1_PREP_LENGTH_CAP 0x008C
+#define RX_MIN_ACTIVATETIME_CAPABILITY 0x008F
+#define RX_HIBERN8TIME_CAPABILITY 0x0092
+#define RX_HS_G2_SYNC_LENGTH_CAP 0x0094
+#define RX_HS_G3_SYNC_LENGTH_CAP 0x0095
+#define RX_HS_G2_PREP_LENGTH_CAP 0x0096
+#define RX_HS_G3_PREP_LENGTH_CAP 0x0097
+#define RX_ADV_GRANULARITY_CAP 0x0098
+#define RX_HIBERN8TIME_CAP 0x0092
+#define RX_ADV_HIBERN8TIME_CAP 0x0099
+#define RX_ADV_MIN_ACTIVATETIME_CAP 0x009A
+#define RX_MODE 0x00A1
+#define RX_HSRATE_SERIES 0x00A2
+#define RX_HSGEAR 0x00A3
+#define RX_PWMGEAR 0x00A4
+#define RX_LS_TERMINATED_ENABLE 0x00A5
+#define RX_HS_UNTERMINATED_ENABLE 0x00A6
+#define RX_ENTER_HIBERN8 0x00A7
+#define RX_BYPASS_8B10B_ENABLE 0x00A8
+#define RX_TERMINATION_FORCE_ENABLE 0x00A9
+#define RXCALCTRL 0x00B4
+#define RXSQCTRL 0x00B5
+#define CFGRXCDR8 0x00BA
+#define CFGRXOVR8 0x00BD
+#define CFGRXOVR6 0x00BF
+#define RXDIRECTCTRL2 0x00C7
+#define CFGRXOVR4 0x00E9
+#define RX_REFCLKFREQ 0x00EB
+#define RX_CFGCLKFREQVAL 0x00EC
+#define CFGWIDEINLN 0x00F0
+#define ENARXDIRECTCFG4 0x00F2
+#define ENARXDIRECTCFG3 0x00F3
+#define ENARXDIRECTCFG2 0x00F4
+
+
+#define is_mphy_tx_attr(attr) (attr < RX_MODE)
+#define RX_ADV_FINE_GRAN_STEP(x) ((((x) & 0x3) << 1) | 0x1)
+#define SYNC_LEN_FINE(x) ((x) & 0x3F)
+#define SYNC_LEN_COARSE(x) ((1 << 6) | ((x) & 0x3F))
+#define PREP_LEN(x) ((x) & 0xF)
+
+#define RX_MIN_ACTIVATETIME_UNIT_US 100
+#define HIBERN8TIME_UNIT_US 100
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19 UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10 UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6 UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5 UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2 UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x) (0x8000 | x)
+
+/*
+ * PHY Adapter attributes
+ */
+#define PA_PHY_TYPE 0x1500
+#define PA_AVAILTXDATALANES 0x1520
+#define PA_MAXTXSPEEDFAST 0x1521
+#define PA_MAXTXSPEEDSLOW 0x1522
+#define PA_MAXRXSPEEDFAST 0x1541
+#define PA_MAXRXSPEEDSLOW 0x1542
+#define PA_TXLINKSTARTUPHS 0x1544
+#define PA_AVAILRXDATALANES 0x1540
+#define PA_MINRXTRAILINGCLOCKS 0x1543
+#define PA_LOCAL_TX_LCC_ENABLE 0x155E
+#define PA_ACTIVETXDATALANES 0x1560
+#define PA_CONNECTEDTXDATALANES 0x1561
+#define PA_TXFORCECLOCK 0x1562
+#define PA_TXPWRMODE 0x1563
+#define PA_TXTRAILINGCLOCKS 0x1564
+#define PA_TXSPEEDFAST 0x1565
+#define PA_TXSPEEDSLOW 0x1566
+#define PA_TXPWRSTATUS 0x1567
+#define PA_TXGEAR 0x1568
+#define PA_TXTERMINATION 0x1569
+#define PA_HSSERIES 0x156A
+#define PA_LEGACYDPHYESCDL 0x1570
+#define PA_PWRMODE 0x1571
+#define PA_ACTIVERXDATALANES 0x1580
+#define PA_CONNECTEDRXDATALANES 0x1581
+#define PA_RXPWRSTATUS 0x1582
+#define PA_RXGEAR 0x1583
+#define PA_RXTERMINATION 0x1584
+#define PA_MAXRXPWMGEAR 0x1586
+#define PA_MAXRXHSGEAR 0x1587
+#define PA_PACPREQTIMEOUT 0x1590
+#define PA_PACPREQEOBTIMEOUT 0x1591
+#define PA_REMOTEVERINFO 0x15A0
+#define PA_LOGICALLANEMAP 0x15A1
+#define PA_SLEEPNOCONFIGTIME 0x15A2
+#define PA_STALLNOCONFIGTIME 0x15A3
+#define PA_SAVECONFIGTIME 0x15A4
+#define PA_RXHSUNTERMCAP 0x15A5
+#define PA_RXLSTERMCAP 0x15A6
+#define PA_GRANULARITY 0x15AA
+#define PA_HIBERN8TIME 0x15A7
+#define PA_LOCALVERINFO 0x15A9
+#define PA_GRANULARITY 0x15AA
+#define PA_TACTIVATE 0x15A8
+#define PA_PWRMODEUSERDATA0 0x15B0
+#define PA_PWRMODEUSERDATA1 0x15B1
+#define PA_PWRMODEUSERDATA2 0x15B2
+#define PA_PWRMODEUSERDATA3 0x15B3
+#define PA_PWRMODEUSERDATA4 0x15B4
+#define PA_PWRMODEUSERDATA5 0x15B5
+#define PA_PWRMODEUSERDATA6 0x15B6
+#define PA_PWRMODEUSERDATA7 0x15B7
+#define PA_PWRMODEUSERDATA8 0x15B8
+#define PA_PWRMODEUSERDATA9 0x15B9
+#define PA_PWRMODEUSERDATA10 0x15BA
+#define PA_PWRMODEUSERDATA11 0x15BB
+#define PA_PACPFRAMECOUNT 0x15C0
+#define PA_PACPERRORCOUNT 0x15C1
+#define PA_PHYTESTCONTROL 0x15C2
+#define PA_TXHSADAPTTYPE 0x15D4
+
+/* Adpat type for PA_TXHSADAPTTYPE attribute */
+#define PA_REFRESH_ADAPT 0x00
+#define PA_INITIAL_ADAPT 0x01
+#define PA_NO_ADAPT 0x03
+
+#define PA_TACTIVATE_TIME_UNIT_US 10
+#define PA_HIBERN8_TIME_UNIT_US 100
+
+/*Other attributes*/
+#define VS_POWERSTATE 0xD083
+#define VS_MPHYCFGUPDT 0xD085
+#define VS_DEBUGOMC 0xD09E
+
+#define PA_GRANULARITY_MIN_VAL 1
+#define PA_GRANULARITY_MAX_VAL 6
+
+/* PHY Adapter Protocol Constants */
+#define PA_MAXDATALANES 4
+
+#define DL_FC0ProtectionTimeOutVal_Default 8191
+#define DL_TC0ReplayTimeOutVal_Default 65535
+#define DL_AFC0ReqTimeOutVal_Default 32767
+#define DL_FC1ProtectionTimeOutVal_Default 8191
+#define DL_TC1ReplayTimeOutVal_Default 65535
+#define DL_AFC1ReqTimeOutVal_Default 32767
+
+#define DME_LocalFC0ProtectionTimeOutVal 0xD041
+#define DME_LocalTC0ReplayTimeOutVal 0xD042
+#define DME_LocalAFC0ReqTimeOutVal 0xD043
+
+/* PA power modes */
+enum {
+ FAST_MODE = 1,
+ SLOW_MODE = 2,
+ FASTAUTO_MODE = 4,
+ SLOWAUTO_MODE = 5,
+ UNCHANGED = 7,
+};
+
+#define PWRMODE_MASK 0xF
+#define PWRMODE_RX_OFFSET 4
+
+/* PA TX/RX Frequency Series */
+enum {
+ PA_HS_MODE_A = 1,
+ PA_HS_MODE_B = 2,
+};
+
+enum ufs_pwm_gear_tag {
+ UFS_PWM_DONT_CHANGE, /* Don't change Gear */
+ UFS_PWM_G1, /* PWM Gear 1 (default for reset) */
+ UFS_PWM_G2, /* PWM Gear 2 */
+ UFS_PWM_G3, /* PWM Gear 3 */
+ UFS_PWM_G4, /* PWM Gear 4 */
+ UFS_PWM_G5, /* PWM Gear 5 */
+ UFS_PWM_G6, /* PWM Gear 6 */
+ UFS_PWM_G7, /* PWM Gear 7 */
+};
+
+enum ufs_hs_gear_tag {
+ UFS_HS_DONT_CHANGE, /* Don't change Gear */
+ UFS_HS_G1, /* HS Gear 1 (default for reset) */
+ UFS_HS_G2, /* HS Gear 2 */
+ UFS_HS_G3, /* HS Gear 3 */
+ UFS_HS_G4, /* HS Gear 4 */
+ UFS_HS_G5 /* HS Gear 5 */
+};
+
+enum ufs_unipro_ver {
+ UFS_UNIPRO_VER_RESERVED = 0,
+ UFS_UNIPRO_VER_1_40 = 1, /* UniPro version 1.40 */
+ UFS_UNIPRO_VER_1_41 = 2, /* UniPro version 1.41 */
+ UFS_UNIPRO_VER_1_6 = 3, /* UniPro version 1.6 */
+ UFS_UNIPRO_VER_1_61 = 4, /* UniPro version 1.61 */
+ UFS_UNIPRO_VER_1_8 = 5, /* UniPro version 1.8 */
+ UFS_UNIPRO_VER_MAX = 6, /* UniPro unsupported version */
+ /* UniPro version field mask in PA_LOCALVERINFO */
+ UFS_UNIPRO_VER_MASK = 0xF,
+};
+
+/*
+ * Data Link Layer Attributes
+ */
+#define DL_TXPREEMPTIONCAP 0x2000
+#define DL_TC0TXMAXSDUSIZE 0x2001
+#define DL_TC0RXINITCREDITVAL 0x2002
+#define DL_TC1TXMAXSDUSIZE 0x2003
+#define DL_TC1RXINITCREDITVAL 0x2004
+#define DL_TC0TXBUFFERSIZE 0x2005
+#define DL_TC1TXBUFFERSIZE 0x2006
+#define DL_TC0TXFCTHRESHOLD 0x2040
+#define DL_FC0PROTTIMEOUTVAL 0x2041
+#define DL_TC0REPLAYTIMEOUTVAL 0x2042
+#define DL_AFC0REQTIMEOUTVAL 0x2043
+#define DL_AFC0CREDITTHRESHOLD 0x2044
+#define DL_TC0OUTACKTHRESHOLD 0x2045
+#define DL_PEERTC0PRESENT 0x2046
+#define DL_PEERTC0RXINITCREVAL 0x2047
+#define DL_TC1TXFCTHRESHOLD 0x2060
+#define DL_FC1PROTTIMEOUTVAL 0x2061
+#define DL_TC1REPLAYTIMEOUTVAL 0x2062
+#define DL_AFC1REQTIMEOUTVAL 0x2063
+#define DL_AFC1CREDITTHRESHOLD 0x2064
+#define DL_TC1OUTACKTHRESHOLD 0x2065
+#define DL_PEERTC1PRESENT 0x2066
+#define DL_PEERTC1RXINITCREVAL 0x2067
+
+/*
+ * Network Layer Attributes
+ */
+#define N_DEVICEID 0x3000
+#define N_DEVICEID_VALID 0x3001
+#define N_TC0TXMAXSDUSIZE 0x3020
+#define N_TC1TXMAXSDUSIZE 0x3021
+
+/*
+ * Transport Layer Attributes
+ */
+#define T_NUMCPORTS 0x4000
+#define T_NUMTESTFEATURES 0x4001
+#define T_CONNECTIONSTATE 0x4020
+#define T_PEERDEVICEID 0x4021
+#define T_PEERCPORTID 0x4022
+#define T_TRAFFICCLASS 0x4023
+#define T_PROTOCOLID 0x4024
+#define T_CPORTFLAGS 0x4025
+#define T_TXTOKENVALUE 0x4026
+#define T_RXTOKENVALUE 0x4027
+#define T_LOCALBUFFERSPACE 0x4028
+#define T_PEERBUFFERSPACE 0x4029
+#define T_CREDITSTOSEND 0x402A
+#define T_CPORTMODE 0x402B
+#define T_TC0TXMAXSDUSIZE 0x4060
+#define T_TC1TXMAXSDUSIZE 0x4061
+
+/* CPort setting */
+#define E2EFC_ON (1 << 0)
+#define E2EFC_OFF (0 << 0)
+#define CSD_N_ON (0 << 1)
+#define CSD_N_OFF (1 << 1)
+#define CSV_N_ON (0 << 2)
+#define CSV_N_OFF (1 << 2)
+#define CPORT_DEF_FLAGS (CSV_N_OFF | CSD_N_OFF | E2EFC_OFF)
+
+/* CPort connection state */
+enum {
+ CPORT_IDLE = 0,
+ CPORT_CONNECTED,
+};
+
+#endif /* _UNIPRO_H_ */