diff options
Diffstat (limited to 'net/mac80211/spectmgmt.c')
-rw-r--r-- | net/mac80211/spectmgmt.c | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/net/mac80211/spectmgmt.c b/net/mac80211/spectmgmt.c new file mode 100644 index 000000000..871cdac2d --- /dev/null +++ b/net/mac80211/spectmgmt.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * spectrum management + * + * Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi> + * Copyright 2002-2005, Instant802 Networks, Inc. + * Copyright 2005-2006, Devicescape Software, Inc. + * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> + * Copyright 2007, Michael Wu <flamingice@sourmilk.net> + * Copyright 2007-2008, Intel Corporation + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * Copyright (C) 2018, 2020, 2022 Intel Corporation + */ + +#include <linux/ieee80211.h> +#include <net/cfg80211.h> +#include <net/mac80211.h> +#include "ieee80211_i.h" +#include "sta_info.h" +#include "wme.h" + +int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata, + struct ieee802_11_elems *elems, + enum nl80211_band current_band, + u32 vht_cap_info, + ieee80211_conn_flags_t conn_flags, u8 *bssid, + struct ieee80211_csa_ie *csa_ie) +{ + enum nl80211_band new_band = current_band; + int new_freq; + u8 new_chan_no; + struct ieee80211_channel *new_chan; + struct cfg80211_chan_def new_vht_chandef = {}; + const struct ieee80211_sec_chan_offs_ie *sec_chan_offs; + const struct ieee80211_wide_bw_chansw_ie *wide_bw_chansw_ie; + int secondary_channel_offset = -1; + + memset(csa_ie, 0, sizeof(*csa_ie)); + + sec_chan_offs = elems->sec_chan_offs; + wide_bw_chansw_ie = elems->wide_bw_chansw_ie; + + if (conn_flags & (IEEE80211_CONN_DISABLE_HT | + IEEE80211_CONN_DISABLE_40MHZ)) { + sec_chan_offs = NULL; + wide_bw_chansw_ie = NULL; + } + + if (conn_flags & IEEE80211_CONN_DISABLE_VHT) + wide_bw_chansw_ie = NULL; + + if (elems->ext_chansw_ie) { + if (!ieee80211_operating_class_to_band( + elems->ext_chansw_ie->new_operating_class, + &new_band)) { + sdata_info(sdata, + "cannot understand ECSA IE operating class, %d, ignoring\n", + elems->ext_chansw_ie->new_operating_class); + } + new_chan_no = elems->ext_chansw_ie->new_ch_num; + csa_ie->count = elems->ext_chansw_ie->count; + csa_ie->mode = elems->ext_chansw_ie->mode; + } else if (elems->ch_switch_ie) { + new_chan_no = elems->ch_switch_ie->new_ch_num; + csa_ie->count = elems->ch_switch_ie->count; + csa_ie->mode = elems->ch_switch_ie->mode; + } else { + /* nothing here we understand */ + return 1; + } + + /* Mesh Channel Switch Parameters Element */ + if (elems->mesh_chansw_params_ie) { + csa_ie->ttl = elems->mesh_chansw_params_ie->mesh_ttl; + csa_ie->mode = elems->mesh_chansw_params_ie->mesh_flags; + csa_ie->pre_value = le16_to_cpu( + elems->mesh_chansw_params_ie->mesh_pre_value); + + if (elems->mesh_chansw_params_ie->mesh_flags & + WLAN_EID_CHAN_SWITCH_PARAM_REASON) + csa_ie->reason_code = le16_to_cpu( + elems->mesh_chansw_params_ie->mesh_reason); + } + + new_freq = ieee80211_channel_to_frequency(new_chan_no, new_band); + new_chan = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq); + if (!new_chan || new_chan->flags & IEEE80211_CHAN_DISABLED) { + sdata_info(sdata, + "BSS %pM switches to unsupported channel (%d MHz), disconnecting\n", + bssid, new_freq); + return -EINVAL; + } + + if (sec_chan_offs) { + secondary_channel_offset = sec_chan_offs->sec_chan_offs; + } else if (!(conn_flags & IEEE80211_CONN_DISABLE_HT)) { + /* If the secondary channel offset IE is not present, + * we can't know what's the post-CSA offset, so the + * best we can do is use 20MHz. + */ + secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + } + + switch (secondary_channel_offset) { + default: + /* secondary_channel_offset was present but is invalid */ + case IEEE80211_HT_PARAM_CHA_SEC_NONE: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_HT20); + break; + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_HT40PLUS); + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_HT40MINUS); + break; + case -1: + cfg80211_chandef_create(&csa_ie->chandef, new_chan, + NL80211_CHAN_NO_HT); + /* keep width for 5/10 MHz channels */ + switch (sdata->vif.bss_conf.chandef.width) { + case NL80211_CHAN_WIDTH_5: + case NL80211_CHAN_WIDTH_10: + csa_ie->chandef.width = + sdata->vif.bss_conf.chandef.width; + break; + default: + break; + } + break; + } + + if (wide_bw_chansw_ie) { + u8 new_seg1 = wide_bw_chansw_ie->new_center_freq_seg1; + struct ieee80211_vht_operation vht_oper = { + .chan_width = + wide_bw_chansw_ie->new_channel_width, + .center_freq_seg0_idx = + wide_bw_chansw_ie->new_center_freq_seg0, + .center_freq_seg1_idx = new_seg1, + /* .basic_mcs_set doesn't matter */ + }; + struct ieee80211_ht_operation ht_oper = { + .operation_mode = + cpu_to_le16(new_seg1 << + IEEE80211_HT_OP_MODE_CCFS2_SHIFT), + }; + + /* default, for the case of IEEE80211_VHT_CHANWIDTH_USE_HT, + * to the previously parsed chandef + */ + new_vht_chandef = csa_ie->chandef; + + /* ignore if parsing fails */ + if (!ieee80211_chandef_vht_oper(&sdata->local->hw, + vht_cap_info, + &vht_oper, &ht_oper, + &new_vht_chandef)) + new_vht_chandef.chan = NULL; + + if (conn_flags & IEEE80211_CONN_DISABLE_80P80MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_80P80) + ieee80211_chandef_downgrade(&new_vht_chandef); + if (conn_flags & IEEE80211_CONN_DISABLE_160MHZ && + new_vht_chandef.width == NL80211_CHAN_WIDTH_160) + ieee80211_chandef_downgrade(&new_vht_chandef); + } + + /* if VHT data is there validate & use it */ + if (new_vht_chandef.chan) { + if (!cfg80211_chandef_compatible(&new_vht_chandef, + &csa_ie->chandef)) { + sdata_info(sdata, + "BSS %pM: CSA has inconsistent channel data, disconnecting\n", + bssid); + return -EINVAL; + } + csa_ie->chandef = new_vht_chandef; + } + + if (elems->max_channel_switch_time) + csa_ie->max_switch_time = + (elems->max_channel_switch_time[0] << 0) | + (elems->max_channel_switch_time[1] << 8) | + (elems->max_channel_switch_time[2] << 16); + + return 0; +} + +static void ieee80211_send_refuse_measurement_request(struct ieee80211_sub_if_data *sdata, + struct ieee80211_msrment_ie *request_ie, + const u8 *da, const u8 *bssid, + u8 dialog_token) +{ + struct ieee80211_local *local = sdata->local; + struct sk_buff *skb; + struct ieee80211_mgmt *msr_report; + + skb = dev_alloc_skb(sizeof(*msr_report) + local->hw.extra_tx_headroom + + sizeof(struct ieee80211_msrment_ie)); + if (!skb) + return; + + skb_reserve(skb, local->hw.extra_tx_headroom); + msr_report = skb_put_zero(skb, 24); + memcpy(msr_report->da, da, ETH_ALEN); + memcpy(msr_report->sa, sdata->vif.addr, ETH_ALEN); + memcpy(msr_report->bssid, bssid, ETH_ALEN); + msr_report->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_ACTION); + + skb_put(skb, 1 + sizeof(msr_report->u.action.u.measurement)); + msr_report->u.action.category = WLAN_CATEGORY_SPECTRUM_MGMT; + msr_report->u.action.u.measurement.action_code = + WLAN_ACTION_SPCT_MSR_RPRT; + msr_report->u.action.u.measurement.dialog_token = dialog_token; + + msr_report->u.action.u.measurement.element_id = WLAN_EID_MEASURE_REPORT; + msr_report->u.action.u.measurement.length = + sizeof(struct ieee80211_msrment_ie); + + memset(&msr_report->u.action.u.measurement.msr_elem, 0, + sizeof(struct ieee80211_msrment_ie)); + msr_report->u.action.u.measurement.msr_elem.token = request_ie->token; + msr_report->u.action.u.measurement.msr_elem.mode |= + IEEE80211_SPCT_MSR_RPRT_MODE_REFUSED; + msr_report->u.action.u.measurement.msr_elem.type = request_ie->type; + + ieee80211_tx_skb(sdata, skb); +} + +void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, + size_t len) +{ + /* + * Ignoring measurement request is spec violation. + * Mandatory measurements must be reported optional + * measurements might be refused or reported incapable + * For now just refuse + * TODO: Answer basic measurement as unmeasured + */ + ieee80211_send_refuse_measurement_request(sdata, + &mgmt->u.action.u.measurement.msr_elem, + mgmt->sa, mgmt->bssid, + mgmt->u.action.u.measurement.dialog_token); +} |