diff options
Diffstat (limited to 'net/netfilter/Kconfig')
| -rw-r--r-- | net/netfilter/Kconfig | 1666 |
1 files changed, 1666 insertions, 0 deletions
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig new file mode 100644 index 000000000..4b8d04640 --- /dev/null +++ b/net/netfilter/Kconfig @@ -0,0 +1,1666 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Core Netfilter Configuration" + depends on INET && NETFILTER + +config NETFILTER_INGRESS + bool "Netfilter ingress support" + default y + select NET_INGRESS + help + This allows you to classify packets from ingress using the Netfilter + infrastructure. + +config NETFILTER_EGRESS + bool "Netfilter egress support" + default y + select NET_EGRESS + help + This allows you to classify packets before transmission using the + Netfilter infrastructure. + +config NETFILTER_SKIP_EGRESS + def_bool NETFILTER_EGRESS && (NET_CLS_ACT || IFB) + +config NETFILTER_NETLINK + tristate + +config NETFILTER_FAMILY_BRIDGE + bool + +config NETFILTER_FAMILY_ARP + bool + +config NETFILTER_NETLINK_HOOK + tristate "Netfilter base hook dump support" + depends on NETFILTER_ADVANCED + depends on NF_TABLES + select NETFILTER_NETLINK + help + If this option is enabled, the kernel will include support + to list the base netfilter hooks via NFNETLINK. + This is helpful for debugging. + +config NETFILTER_NETLINK_ACCT + tristate "Netfilter NFACCT over NFNETLINK interface" + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK + help + If this option is enabled, the kernel will include support + for extended accounting via NFNETLINK. + +config NETFILTER_NETLINK_QUEUE + tristate "Netfilter NFQUEUE over NFNETLINK interface" + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK + help + If this option is enabled, the kernel will include support + for queueing packets via NFNETLINK. + +config NETFILTER_NETLINK_LOG + tristate "Netfilter LOG over NFNETLINK interface" + default m if NETFILTER_ADVANCED=n + select NETFILTER_NETLINK + help + If this option is enabled, the kernel will include support + for logging packets via NFNETLINK. + + This obsoletes the existing ipt_ULOG and ebg_ulog mechanisms, + and is also scheduled to replace the old syslog-based ipt_LOG + and ip6t_LOG modules. + +config NETFILTER_NETLINK_OSF + tristate "Netfilter OSF over NFNETLINK interface" + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK + help + If this option is enabled, the kernel will include support + for passive OS fingerprint via NFNETLINK. + +config NF_CONNTRACK + tristate "Netfilter connection tracking support" + default m if NETFILTER_ADVANCED=n + select NF_DEFRAG_IPV4 + select NF_DEFRAG_IPV6 if IPV6 != n + help + Connection tracking keeps a record of what packets have passed + through your machine, in order to figure out how they are related + into connections. + + This is required to do Masquerading or other kinds of Network + Address Translation. It can also be used to enhance packet + filtering (see `Connection state match support' below). + + To compile it as a module, choose M here. If unsure, say N. + +config NF_LOG_SYSLOG + tristate "Syslog packet logging" + default m if NETFILTER_ADVANCED=n + help + This option enable support for packet logging via syslog. + It supports IPv4, IPV6, ARP and common transport protocols such + as TCP and UDP. + This is a simpler but less flexible logging method compared to + CONFIG_NETFILTER_NETLINK_LOG. + If both are enabled the backend to use can be configured at run-time + by means of per-address-family sysctl tunables. + +if NF_CONNTRACK +config NETFILTER_CONNCOUNT + tristate + +config NF_CONNTRACK_MARK + bool 'Connection mark tracking support' + depends on NETFILTER_ADVANCED + help + This option enables support for connection marks, used by the + `CONNMARK' target and `connmark' match. Similar to the mark value + of packets, but this mark value is kept in the conntrack session + instead of the individual packets. + +config NF_CONNTRACK_SECMARK + bool 'Connection tracking security mark support' + depends on NETWORK_SECMARK + default y if NETFILTER_ADVANCED=n + help + This option enables security markings to be applied to + connections. Typically they are copied to connections from + packets using the CONNSECMARK target and copied back from + connections to packets with the same target, with the packets + being originally labeled via SECMARK. + + If unsure, say 'N'. + +config NF_CONNTRACK_ZONES + bool 'Connection tracking zones' + depends on NETFILTER_ADVANCED + help + This option enables support for connection tracking zones. + Normally, each connection needs to have a unique system wide + identity. Connection tracking zones allow to have multiple + connections using the same identity, as long as they are + contained in different zones. + + If unsure, say `N'. + +config NF_CONNTRACK_PROCFS + bool "Supply CT list in procfs (OBSOLETE)" + depends on PROC_FS + help + This option enables for the list of known conntrack entries + to be shown in procfs under net/netfilter/nf_conntrack. This + is considered obsolete in favor of using the conntrack(8) + tool which uses Netlink. + +config NF_CONNTRACK_EVENTS + bool "Connection tracking events" + depends on NETFILTER_ADVANCED + help + If this option is enabled, the connection tracking code will + provide a notifier chain that can be used by other kernel code + to get notified about changes in the connection tracking state. + + If unsure, say `N'. + +config NF_CONNTRACK_TIMEOUT + bool 'Connection tracking timeout' + depends on NETFILTER_ADVANCED + help + This option enables support for connection tracking timeout + extension. This allows you to attach timeout policies to flow + via the CT target. + + If unsure, say `N'. + +config NF_CONNTRACK_TIMESTAMP + bool 'Connection tracking timestamping' + depends on NETFILTER_ADVANCED + help + This option enables support for connection tracking timestamping. + This allows you to store the flow start-time and to obtain + the flow-stop time (once it has been destroyed) via Connection + tracking events. + + If unsure, say `N'. + +config NF_CONNTRACK_LABELS + bool "Connection tracking labels" + help + This option enables support for assigning user-defined flag bits + to connection tracking entries. It can be used with xtables connlabel + match and the nftables ct expression. + +config NF_CT_PROTO_DCCP + bool 'DCCP protocol connection tracking support' + depends on NETFILTER_ADVANCED + default y + help + With this option enabled, the layer 3 independent connection + tracking code will be able to do state tracking on DCCP connections. + + If unsure, say Y. + +config NF_CT_PROTO_GRE + bool + +config NF_CT_PROTO_SCTP + bool 'SCTP protocol connection tracking support' + depends on NETFILTER_ADVANCED + default y + select LIBCRC32C + help + With this option enabled, the layer 3 independent connection + tracking code will be able to do state tracking on SCTP connections. + + If unsure, say Y. + +config NF_CT_PROTO_UDPLITE + bool 'UDP-Lite protocol connection tracking support' + depends on NETFILTER_ADVANCED + default y + help + With this option enabled, the layer 3 independent connection + tracking code will be able to do state tracking on UDP-Lite + connections. + + If unsure, say Y. + +config NF_CONNTRACK_AMANDA + tristate "Amanda backup protocol support" + depends on NETFILTER_ADVANCED + select TEXTSEARCH + select TEXTSEARCH_KMP + help + If you are running the Amanda backup package <http://www.amanda.org/> + on this machine or machines that will be MASQUERADED through this + machine, then you may want to enable this feature. This allows the + connection tracking and natting code to allow the sub-channels that + Amanda requires for communication of the backup data, messages and + index. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_FTP + tristate "FTP protocol support" + default m if NETFILTER_ADVANCED=n + help + Tracking FTP connections is problematic: special helpers are + required for tracking them, and doing masquerading and other forms + of Network Address Translation on them. + + This is FTP support on Layer 3 independent connection tracking. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_H323 + tristate "H.323 protocol support" + depends on IPV6 || IPV6=n + depends on NETFILTER_ADVANCED + help + H.323 is a VoIP signalling protocol from ITU-T. As one of the most + important VoIP protocols, it is widely used by voice hardware and + software including voice gateways, IP phones, Netmeeting, OpenPhone, + Gnomemeeting, etc. + + With this module you can support H.323 on a connection tracking/NAT + firewall. + + This module supports RAS, Fast Start, H.245 Tunnelling, Call + Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, + whiteboard, file transfer, etc. For more information, please + visit http://nath323.sourceforge.net/. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_IRC + tristate "IRC protocol support" + default m if NETFILTER_ADVANCED=n + help + There is a commonly-used extension to IRC called + Direct Client-to-Client Protocol (DCC). This enables users to send + files to each other, and also chat to each other without the need + of a server. DCC Sending is used anywhere you send files over IRC, + and DCC Chat is most commonly used by Eggdrop bots. If you are + using NAT, this extension will enable you to send files and initiate + chats. Note that you do NOT need this extension to get files or + have others initiate chats, or everything else in IRC. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_BROADCAST + tristate + +config NF_CONNTRACK_NETBIOS_NS + tristate "NetBIOS name service protocol support" + select NF_CONNTRACK_BROADCAST + help + NetBIOS name service requests are sent as broadcast messages from an + unprivileged port and responded to with unicast messages to the + same port. This make them hard to firewall properly because connection + tracking doesn't deal with broadcasts. This helper tracks locally + originating NetBIOS name service requests and the corresponding + responses. It relies on correct IP address configuration, specifically + netmask and broadcast address. When properly configured, the output + of "ip address show" should look similar to this: + + $ ip -4 address show eth0 + 4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 + inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0 + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_SNMP + tristate "SNMP service protocol support" + depends on NETFILTER_ADVANCED + select NF_CONNTRACK_BROADCAST + help + SNMP service requests are sent as broadcast messages from an + unprivileged port and responded to with unicast messages to the + same port. This make them hard to firewall properly because connection + tracking doesn't deal with broadcasts. This helper tracks locally + originating SNMP service requests and the corresponding + responses. It relies on correct IP address configuration, specifically + netmask and broadcast address. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_PPTP + tristate "PPtP protocol support" + depends on NETFILTER_ADVANCED + select NF_CT_PROTO_GRE + help + This module adds support for PPTP (Point to Point Tunnelling + Protocol, RFC2637) connection tracking and NAT. + + If you are running PPTP sessions over a stateful firewall or NAT + box, you may want to enable this feature. + + Please note that not all PPTP modes of operation are supported yet. + Specifically these limitations exist: + - Blindly assumes that control connections are always established + in PNS->PAC direction. This is a violation of RFC2637. + - Only supports a single call within each session + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_SANE + tristate "SANE protocol support" + depends on NETFILTER_ADVANCED + help + SANE is a protocol for remote access to scanners as implemented + by the 'saned' daemon. Like FTP, it uses separate control and + data connections. + + With this module you can support SANE on a connection tracking + firewall. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_SIP + tristate "SIP protocol support" + default m if NETFILTER_ADVANCED=n + help + SIP is an application-layer control protocol that can establish, + modify, and terminate multimedia sessions (conferences) such as + Internet telephony calls. With the nf_conntrack_sip and + the nf_nat_sip modules you can support the protocol on a connection + tracking/NATing firewall. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CONNTRACK_TFTP + tristate "TFTP protocol support" + depends on NETFILTER_ADVANCED + help + TFTP connection tracking helper, this is required depending + on how restrictive your ruleset is. + If you are using a tftp client behind -j SNAT or -j MASQUERADING + you will need this. + + To compile it as a module, choose M here. If unsure, say N. + +config NF_CT_NETLINK + tristate 'Connection tracking netlink interface' + select NETFILTER_NETLINK + default m if NETFILTER_ADVANCED=n + help + This option enables support for a netlink-based userspace interface + +config NF_CT_NETLINK_TIMEOUT + tristate 'Connection tracking timeout tuning via Netlink' + select NETFILTER_NETLINK + depends on NETFILTER_ADVANCED + depends on NF_CONNTRACK_TIMEOUT + help + This option enables support for connection tracking timeout + fine-grain tuning. This allows you to attach specific timeout + policies to flows, instead of using the global timeout policy. + + If unsure, say `N'. + +config NF_CT_NETLINK_HELPER + tristate 'Connection tracking helpers in user-space via Netlink' + select NETFILTER_NETLINK + depends on NF_CT_NETLINK + depends on NETFILTER_NETLINK_QUEUE + depends on NETFILTER_NETLINK_GLUE_CT + depends on NETFILTER_ADVANCED + help + This option enables the user-space connection tracking helpers + infrastructure. + + If unsure, say `N'. + +config NETFILTER_NETLINK_GLUE_CT + bool "NFQUEUE and NFLOG integration with Connection Tracking" + default n + depends on (NETFILTER_NETLINK_QUEUE || NETFILTER_NETLINK_LOG) && NF_CT_NETLINK + help + If this option is enabled, NFQUEUE and NFLOG can include + Connection Tracking information together with the packet is + the enqueued via NFNETLINK. + +config NF_NAT + tristate "Network Address Translation support" + depends on NF_CONNTRACK + default m if NETFILTER_ADVANCED=n + help + The NAT option allows masquerading, port forwarding and other + forms of full Network Address Port Translation. This can be + controlled by iptables, ip6tables or nft. + +config NF_NAT_AMANDA + tristate + depends on NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_AMANDA + +config NF_NAT_FTP + tristate + depends on NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_FTP + +config NF_NAT_IRC + tristate + depends on NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_IRC + +config NF_NAT_SIP + tristate + depends on NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_SIP + +config NF_NAT_TFTP + tristate + depends on NF_CONNTRACK && NF_NAT + default NF_NAT && NF_CONNTRACK_TFTP + +config NF_NAT_REDIRECT + bool + +config NF_NAT_MASQUERADE + bool + +config NETFILTER_SYNPROXY + tristate + +endif # NF_CONNTRACK + +config NF_TABLES + select NETFILTER_NETLINK + select LIBCRC32C + tristate "Netfilter nf_tables support" + help + nftables is the new packet classification framework that intends to + replace the existing {ip,ip6,arp,eb}_tables infrastructure. It + provides a pseudo-state machine with an extensible instruction-set + (also known as expressions) that the userspace 'nft' utility + (https://www.netfilter.org/projects/nftables) uses to build the + rule-set. It also comes with the generic set infrastructure that + allows you to construct mappings between matchings and actions + for performance lookups. + + To compile it as a module, choose M here. + +if NF_TABLES +config NF_TABLES_INET + depends on IPV6 + select NF_TABLES_IPV4 + select NF_TABLES_IPV6 + bool "Netfilter nf_tables mixed IPv4/IPv6 tables support" + help + This option enables support for a mixed IPv4/IPv6 "inet" table. + +config NF_TABLES_NETDEV + bool "Netfilter nf_tables netdev tables support" + help + This option enables support for the "netdev" table. + +config NFT_NUMGEN + tristate "Netfilter nf_tables number generator module" + help + This option adds the number generator expression used to perform + incremental counting and random numbers bound to a upper limit. + +config NFT_CT + depends on NF_CONNTRACK + tristate "Netfilter nf_tables conntrack module" + help + This option adds the "ct" expression that you can use to match + connection tracking information such as the flow state. + +config NFT_FLOW_OFFLOAD + depends on NF_CONNTRACK && NF_FLOW_TABLE + tristate "Netfilter nf_tables hardware flow offload module" + help + This option adds the "flow_offload" expression that you can use to + choose what flows are placed into the hardware. + +config NFT_CONNLIMIT + tristate "Netfilter nf_tables connlimit module" + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NETFILTER_CONNCOUNT + help + This option adds the "connlimit" expression that you can use to + ratelimit rule matchings per connections. + +config NFT_LOG + tristate "Netfilter nf_tables log module" + help + This option adds the "log" expression that you can use to log + packets matching some criteria. + +config NFT_LIMIT + tristate "Netfilter nf_tables limit module" + help + This option adds the "limit" expression that you can use to + ratelimit rule matchings. + +config NFT_MASQ + depends on NF_CONNTRACK + depends on NF_NAT + select NF_NAT_MASQUERADE + tristate "Netfilter nf_tables masquerade support" + help + This option adds the "masquerade" expression that you can use + to perform NAT in the masquerade flavour. + +config NFT_REDIR + depends on NF_CONNTRACK + depends on NF_NAT + tristate "Netfilter nf_tables redirect support" + select NF_NAT_REDIRECT + help + This options adds the "redirect" expression that you can use + to perform NAT in the redirect flavour. + +config NFT_NAT + depends on NF_CONNTRACK + select NF_NAT + depends on NF_TABLES_IPV4 || NF_TABLES_IPV6 + tristate "Netfilter nf_tables nat module" + help + This option adds the "nat" expression that you can use to perform + typical Network Address Translation (NAT) packet transformations. + +config NFT_TUNNEL + tristate "Netfilter nf_tables tunnel module" + help + This option adds the "tunnel" expression that you can use to set + tunneling policies. + +config NFT_OBJREF + tristate "Netfilter nf_tables stateful object reference module" + help + This option adds the "objref" expression that allows you to refer to + stateful objects, such as counters and quotas. + +config NFT_QUEUE + depends on NETFILTER_NETLINK_QUEUE + tristate "Netfilter nf_tables queue module" + help + This is required if you intend to use the userspace queueing + infrastructure (also known as NFQUEUE) from nftables. + +config NFT_QUOTA + tristate "Netfilter nf_tables quota module" + help + This option adds the "quota" expression that you can use to match + enforce bytes quotas. + +config NFT_REJECT + default m if NETFILTER_ADVANCED=n + tristate "Netfilter nf_tables reject support" + depends on !NF_TABLES_INET || (IPV6!=m || m) + help + This option adds the "reject" expression that you can use to + explicitly deny and notify via TCP reset/ICMP informational errors + unallowed traffic. + +config NFT_REJECT_INET + depends on NF_TABLES_INET + default NFT_REJECT + tristate + +config NFT_COMPAT + depends on NETFILTER_XTABLES + tristate "Netfilter x_tables over nf_tables module" + help + This is required if you intend to use any of existing + x_tables match/target extensions over the nf_tables + framework. + +config NFT_HASH + tristate "Netfilter nf_tables hash module" + help + This option adds the "hash" expression that you can use to perform + a hash operation on registers. + +config NFT_FIB + tristate + +config NFT_FIB_INET + depends on NF_TABLES_INET + depends on NFT_FIB_IPV4 + depends on NFT_FIB_IPV6 + tristate "Netfilter nf_tables fib inet support" + help + This option allows using the FIB expression from the inet table. + The lookup will be delegated to the IPv4 or IPv6 FIB depending + on the protocol of the packet. + +config NFT_XFRM + tristate "Netfilter nf_tables xfrm/IPSec security association matching" + depends on XFRM + help + This option adds an expression that you can use to extract properties + of a packets security association. + +config NFT_SOCKET + tristate "Netfilter nf_tables socket match support" + depends on IPV6 || IPV6=n + select NF_SOCKET_IPV4 + select NF_SOCKET_IPV6 if NF_TABLES_IPV6 + help + This option allows matching for the presence or absence of a + corresponding socket and its attributes. + +config NFT_OSF + tristate "Netfilter nf_tables passive OS fingerprint support" + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK_OSF + help + This option allows matching packets from an specific OS. + +config NFT_TPROXY + tristate "Netfilter nf_tables tproxy support" + depends on IPV6 || IPV6=n + select NF_DEFRAG_IPV4 + select NF_DEFRAG_IPV6 if NF_TABLES_IPV6 + select NF_TPROXY_IPV4 + select NF_TPROXY_IPV6 if NF_TABLES_IPV6 + help + This makes transparent proxy support available in nftables. + +config NFT_SYNPROXY + tristate "Netfilter nf_tables SYNPROXY expression support" + depends on NF_CONNTRACK && NETFILTER_ADVANCED + select NETFILTER_SYNPROXY + select SYN_COOKIES + help + The SYNPROXY expression allows you to intercept TCP connections and + establish them using syncookies before they are passed on to the + server. This allows to avoid conntrack and server resource usage + during SYN-flood attacks. + +if NF_TABLES_NETDEV + +config NF_DUP_NETDEV + tristate "Netfilter packet duplication support" + help + This option enables the generic packet duplication infrastructure + for Netfilter. + +config NFT_DUP_NETDEV + tristate "Netfilter nf_tables netdev packet duplication support" + select NF_DUP_NETDEV + help + This option enables packet duplication for the "netdev" family. + +config NFT_FWD_NETDEV + tristate "Netfilter nf_tables netdev packet forwarding support" + select NF_DUP_NETDEV + help + This option enables packet forwarding for the "netdev" family. + +config NFT_FIB_NETDEV + depends on NFT_FIB_IPV4 + depends on NFT_FIB_IPV6 + tristate "Netfilter nf_tables netdev fib lookups support" + help + This option allows using the FIB expression from the netdev table. + The lookup will be delegated to the IPv4 or IPv6 FIB depending + on the protocol of the packet. + +config NFT_REJECT_NETDEV + depends on NFT_REJECT_IPV4 + depends on NFT_REJECT_IPV6 + tristate "Netfilter nf_tables netdev REJECT support" + help + This option enables the REJECT support from the netdev table. + The return packet generation will be delegated to the IPv4 + or IPv6 ICMP or TCP RST implementation depending on the + protocol of the packet. + +endif # NF_TABLES_NETDEV + +endif # NF_TABLES + +config NF_FLOW_TABLE_INET + tristate "Netfilter flow table mixed IPv4/IPv6 module" + depends on NF_FLOW_TABLE + help + This option adds the flow table mixed IPv4/IPv6 support. + + To compile it as a module, choose M here. + +config NF_FLOW_TABLE + tristate "Netfilter flow table module" + depends on NETFILTER_INGRESS + depends on NF_CONNTRACK + depends on NF_TABLES + help + This option adds the flow table core infrastructure. + + To compile it as a module, choose M here. + +config NF_FLOW_TABLE_PROCFS + bool "Supply flow table statistics in procfs" + depends on NF_FLOW_TABLE + depends on PROC_FS + help + This option enables for the flow table offload statistics + to be shown in procfs under net/netfilter/nf_flowtable. + +config NETFILTER_XTABLES + tristate "Netfilter Xtables support (required for ip_tables)" + default m if NETFILTER_ADVANCED=n + help + This is required if you intend to use any of ip_tables, + ip6_tables or arp_tables. + +if NETFILTER_XTABLES + +config NETFILTER_XTABLES_COMPAT + bool "Netfilter Xtables 32bit support" + depends on COMPAT + default y + help + This option provides a translation layer to run 32bit arp,ip(6),ebtables + binaries on 64bit kernels. + + If unsure, say N. + +comment "Xtables combined modules" + +config NETFILTER_XT_MARK + tristate 'nfmark target and match support' + default m if NETFILTER_ADVANCED=n + help + This option adds the "MARK" target and "mark" match. + + Netfilter mark matching allows you to match packets based on the + "nfmark" value in the packet. + The target allows you to create rules in the "mangle" table which alter + the netfilter mark (nfmark) field associated with the packet. + + Prior to routing, the nfmark can influence the routing method and can + also be used by other subsystems to change their behavior. + +config NETFILTER_XT_CONNMARK + tristate 'ctmark target and match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NF_CONNTRACK_MARK + help + This option adds the "CONNMARK" target and "connmark" match. + + Netfilter allows you to store a mark value per connection (a.k.a. + ctmark), similarly to the packet mark (nfmark). Using this + target and match, you can set and match on this mark. + +config NETFILTER_XT_SET + tristate 'set target and match support' + depends on IP_SET + depends on NETFILTER_ADVANCED + help + This option adds the "SET" target and "set" match. + + Using this target and match, you can add/delete and match + elements in the sets created by ipset(8). + + To compile it as a module, choose M here. If unsure, say N. + +# alphabetically ordered list of targets + +comment "Xtables targets" + +config NETFILTER_XT_TARGET_AUDIT + tristate "AUDIT target support" + depends on AUDIT + depends on NETFILTER_ADVANCED + help + This option adds a 'AUDIT' target, which can be used to create + audit records for packets dropped/accepted. + + To compileit as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_CHECKSUM + tristate "CHECKSUM target support" + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option adds a `CHECKSUM' target, which can be used in the iptables mangle + table to work around buggy DHCP clients in virtualized environments. + + Some old DHCP clients drop packets because they are not aware + that the checksum would normally be offloaded to hardware and + thus should be considered valid. + This target can be used to fill in the checksum using iptables + when such packets are sent via a virtual network device. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_CLASSIFY + tristate '"CLASSIFY" target support' + depends on NETFILTER_ADVANCED + help + This option adds a `CLASSIFY' target, which enables the user to set + the priority of a packet. Some qdiscs can use this value for + classification, among these are: + + atm, cbq, dsmark, pfifo_fast, htb, prio + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_CONNMARK + tristate '"CONNMARK" target support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NETFILTER_XT_CONNMARK + help + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). + +config NETFILTER_XT_TARGET_CONNSECMARK + tristate '"CONNSECMARK" target support' + depends on NF_CONNTRACK && NF_CONNTRACK_SECMARK + default m if NETFILTER_ADVANCED=n + help + The CONNSECMARK target copies security markings from packets + to connections, and restores security markings from connections + to packets (if the packets are not already marked). This would + normally be used in conjunction with the SECMARK target. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_CT + tristate '"CT" target support' + depends on NF_CONNTRACK + depends on IP_NF_RAW || IP6_NF_RAW + depends on NETFILTER_ADVANCED + help + This options adds a `CT' target, which allows to specify initial + connection tracking parameters like events to be delivered and + the helper to be used. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_DSCP + tristate '"DSCP" and "TOS" target support' + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option adds a `DSCP' target, which allows you to manipulate + the IPv4/IPv6 header DSCP field (differentiated services codepoint). + + The DSCP field can have any value between 0x0 and 0x3f inclusive. + + It also adds the "TOS" target, which allows you to create rules in + the "mangle" table which alter the Type Of Service field of an IPv4 + or the Priority field of an IPv6 packet, prior to routing. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_HL + tristate '"HL" hoplimit target support' + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option adds the "HL" (for IPv6) and "TTL" (for IPv4) + targets, which enable the user to change the + hoplimit/time-to-live value of the IP header. + + While it is safe to decrement the hoplimit/TTL value, the + modules also allow to increment and set the hoplimit value of + the header to arbitrary values. This is EXTREMELY DANGEROUS + since you can easily create immortal packets that loop + forever on the network. + +config NETFILTER_XT_TARGET_HMARK + tristate '"HMARK" target support' + depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n + depends on NETFILTER_ADVANCED + help + This option adds the "HMARK" target. + + The target allows you to create rules in the "raw" and "mangle" tables + which set the skbuff mark by means of hash calculation within a given + range. The nfmark can influence the routing method and can also be used + by other subsystems to change their behaviour. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_IDLETIMER + tristate "IDLETIMER target support" + depends on NETFILTER_ADVANCED + help + + This option adds the `IDLETIMER' target. Each matching packet + resets the timer associated with label specified when the rule is + added. When the timer expires, it triggers a sysfs notification. + The remaining time for expiration can be read via sysfs. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_LED + tristate '"LED" target support' + depends on LEDS_CLASS && LEDS_TRIGGERS + depends on NETFILTER_ADVANCED + help + This option adds a `LED' target, which allows you to blink LEDs in + response to particular packets passing through your machine. + + This can be used to turn a spare LED into a network activity LED, + which only flashes in response to FTP transfers, for example. Or + you could have an LED which lights up for a minute or two every time + somebody connects to your machine via SSH. + + You will need support for the "led" class to make this work. + + To create an LED trigger for incoming SSH traffic: + iptables -A INPUT -p tcp --dport 22 -j LED --led-trigger-id ssh --led-delay 1000 + + Then attach the new trigger to an LED on your system: + echo netfilter-ssh > /sys/class/leds/<ledname>/trigger + + For more information on the LEDs available on your system, see + Documentation/leds/leds-class.rst + +config NETFILTER_XT_TARGET_LOG + tristate "LOG target support" + select NF_LOG_SYSLOG + select NF_LOG_IPV6 if IP6_NF_IPTABLES + default m if NETFILTER_ADVANCED=n + help + This option adds a `LOG' target, which allows you to create rules in + any iptables table which records the packet header to the syslog. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_MARK + tristate '"MARK" target support' + depends on NETFILTER_ADVANCED + select NETFILTER_XT_MARK + help + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). + +config NETFILTER_XT_NAT + tristate '"SNAT and DNAT" targets support' + depends on NF_NAT + help + This option enables the SNAT and DNAT targets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NETMAP + tristate '"NETMAP" target support' + depends on NF_NAT + help + NETMAP is an implementation of static 1:1 NAT mapping of network + addresses. It maps the network address part, while keeping the host + address part intact. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NFLOG + tristate '"NFLOG" target support' + default m if NETFILTER_ADVANCED=n + select NETFILTER_NETLINK_LOG + help + This option enables the NFLOG target, which allows to LOG + messages through nfnetlink_log. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NFQUEUE + tristate '"NFQUEUE" target Support' + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK_QUEUE + help + This target replaced the old obsolete QUEUE target. + + As opposed to QUEUE, it supports 65535 different queues, + not just one. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_NOTRACK + tristate '"NOTRACK" target support (DEPRECATED)' + depends on NF_CONNTRACK + depends on IP_NF_RAW || IP6_NF_RAW + depends on NETFILTER_ADVANCED + select NETFILTER_XT_TARGET_CT + +config NETFILTER_XT_TARGET_RATEEST + tristate '"RATEEST" target support' + depends on NETFILTER_ADVANCED + help + This option adds a `RATEEST' target, which allows to measure + rates similar to TC estimators. The `rateest' match can be + used to match on the measured rates. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_REDIRECT + tristate "REDIRECT target support" + depends on NF_NAT + select NF_NAT_REDIRECT + help + REDIRECT is a special case of NAT: all incoming connections are + mapped onto the incoming interface's address, causing the packets to + come to the local machine instead of passing through. This is + useful for transparent proxies. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_MASQUERADE + tristate "MASQUERADE target support" + depends on NF_NAT + default m if NETFILTER_ADVANCED=n + select NF_NAT_MASQUERADE + help + Masquerading is a special case of NAT: all outgoing connections are + changed to seem to come from a particular interface's address, and + if the interface goes down, those connections are lost. This is + only useful for dialup accounts with dynamic IP address (ie. your IP + address will be different on next dialup). + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TEE + tristate '"TEE" - packet cloning to alternate destination' + depends on NETFILTER_ADVANCED + depends on IPV6 || IPV6=n + depends on !NF_CONNTRACK || NF_CONNTRACK + depends on IP6_NF_IPTABLES || !IP6_NF_IPTABLES + select NF_DUP_IPV4 + select NF_DUP_IPV6 if IP6_NF_IPTABLES + help + This option adds a "TEE" target with which a packet can be cloned and + this clone be rerouted to another nexthop. + +config NETFILTER_XT_TARGET_TPROXY + tristate '"TPROXY" target transparent proxying support' + depends on NETFILTER_XTABLES + depends on NETFILTER_ADVANCED + depends on IPV6 || IPV6=n + depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n + depends on IP_NF_MANGLE + select NF_DEFRAG_IPV4 + select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n + select NF_TPROXY_IPV4 + select NF_TPROXY_IPV6 if IP6_NF_IPTABLES + help + This option adds a `TPROXY' target, which is somewhat similar to + REDIRECT. It can only be used in the mangle table and is useful + to redirect traffic to a transparent proxy. It does _not_ depend + on Netfilter connection tracking and NAT, unlike REDIRECT. + For it to work you will have to configure certain iptables rules + and use policy routing. For more information on how to set it up + see Documentation/networking/tproxy.rst. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TRACE + tristate '"TRACE" target support' + depends on IP_NF_RAW || IP6_NF_RAW + depends on NETFILTER_ADVANCED + help + The TRACE target allows you to mark packets so that the kernel + will log every rule which match the packets as those traverse + the tables, chains, rules. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_TARGET_SECMARK + tristate '"SECMARK" target support' + depends on NETWORK_SECMARK + default m if NETFILTER_ADVANCED=n + help + The SECMARK target allows security marking of network + packets, for use with security subsystems. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TCPMSS + tristate '"TCPMSS" target support' + depends on IPV6 || IPV6=n + default m if NETFILTER_ADVANCED=n + help + This option adds a `TCPMSS' target, which allows you to alter the + MSS value of TCP SYN packets, to control the maximum size for that + connection (usually limiting it to your outgoing interface's MTU + minus 40). + + This is used to overcome criminally braindead ISPs or servers which + block ICMP Fragmentation Needed packets. The symptoms of this + problem are that everything works fine from your Linux + firewall/router, but machines behind it can never exchange large + packets: + 1) Web browsers connect, then hang with no data received. + 2) Small mail works fine, but large emails hang. + 3) ssh works fine, but scp hangs after initial handshaking. + + Workaround: activate this option and add a rule to your firewall + configuration like: + + iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \ + -j TCPMSS --clamp-mss-to-pmtu + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_TARGET_TCPOPTSTRIP + tristate '"TCPOPTSTRIP" target support' + depends on IP_NF_MANGLE || IP6_NF_MANGLE + depends on NETFILTER_ADVANCED + help + This option adds a "TCPOPTSTRIP" target, which allows you to strip + TCP options from TCP packets. + +# alphabetically ordered list of matches + +comment "Xtables matches" + +config NETFILTER_XT_MATCH_ADDRTYPE + tristate '"addrtype" address type match support' + default m if NETFILTER_ADVANCED=n + help + This option allows you to match what routing thinks of an address, + eg. UNICAST, LOCAL, BROADCAST, ... + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_BPF + tristate '"bpf" match support' + depends on NETFILTER_ADVANCED + help + BPF matching applies a linux socket filter to each packet and + accepts those for which the filter returns non-zero. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_CGROUP + tristate '"control group" match support' + depends on NETFILTER_ADVANCED + depends on CGROUPS + select CGROUP_NET_CLASSID + help + Socket/process control group matching allows you to match locally + generated packets based on which net_cls control group processes + belong to. + +config NETFILTER_XT_MATCH_CLUSTER + tristate '"cluster" match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + help + This option allows you to build work-load-sharing clusters of + network servers/stateful firewalls without having a dedicated + load-balancing router/server/switch. Basically, this match returns + true when the packet must be handled by this cluster node. Thus, + all nodes see all packets and this match decides which node handles + what packets. The work-load sharing algorithm is based on source + address hashing. + + If you say Y or M here, try `iptables -m cluster --help` for + more information. + +config NETFILTER_XT_MATCH_COMMENT + tristate '"comment" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `comment' dummy-match, which allows you to put + comments in your iptables ruleset. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_CONNBYTES + tristate '"connbytes" per-connection counter match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + help + This option adds a `connbytes' match, which allows you to match the + number of bytes and/or packets for each direction within a connection. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_CONNLABEL + tristate '"connlabel" match support' + select NF_CONNTRACK_LABELS + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + help + This match allows you to test and assign userspace-defined labels names + to a connection. The kernel only stores bit values - mapping + names to bits is done by userspace. + + Unlike connmark, more than 32 flag bits may be assigned to a + connection simultaneously. + +config NETFILTER_XT_MATCH_CONNLIMIT + tristate '"connlimit" match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NETFILTER_CONNCOUNT + help + This match allows you to match against the number of parallel + connections to a server per client IP address (or address block). + +config NETFILTER_XT_MATCH_CONNMARK + tristate '"connmark" connection mark match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + select NETFILTER_XT_CONNMARK + help + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). + +config NETFILTER_XT_MATCH_CONNTRACK + tristate '"conntrack" connection tracking match support' + depends on NF_CONNTRACK + default m if NETFILTER_ADVANCED=n + help + This is a general conntrack match module, a superset of the state match. + + It allows matching on additional conntrack information, which is + useful in complex configurations, such as NAT gateways with multiple + internet links or tunnels. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_CPU + tristate '"cpu" match support' + depends on NETFILTER_ADVANCED + help + CPU matching allows you to match packets based on the CPU + currently handling the packet. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_DCCP + tristate '"dccp" protocol match support' + depends on NETFILTER_ADVANCED + default IP_DCCP + help + With this option enabled, you will be able to use the iptables + `dccp' match in order to match on DCCP source/destination ports + and DCCP flags. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_DEVGROUP + tristate '"devgroup" match support' + depends on NETFILTER_ADVANCED + help + This options adds a `devgroup' match, which allows to match on the + device group a network device is assigned to. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_DSCP + tristate '"dscp" and "tos" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `DSCP' match, which allows you to match against + the IPv4/IPv6 header DSCP field (differentiated services codepoint). + + The DSCP field can have any value between 0x0 and 0x3f inclusive. + + It will also add a "tos" match, which allows you to match packets + based on the Type Of Service fields of the IPv4 packet (which share + the same bits as DSCP). + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_ECN + tristate '"ecn" match support' + depends on NETFILTER_ADVANCED + help + This option adds an "ECN" match, which allows you to match against + the IPv4 and TCP header ECN fields. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_ESP + tristate '"esp" match support' + depends on NETFILTER_ADVANCED + help + This match extension allows you to match a range of SPIs + inside ESP header of IPSec packets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_HASHLIMIT + tristate '"hashlimit" match support' + depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n + depends on NETFILTER_ADVANCED + help + This option adds a `hashlimit' match. + + As opposed to `limit', this match dynamically creates a hash table + of limit buckets, based on your selection of source/destination + addresses and/or ports. + + It enables you to express policies like `10kpps for any given + destination address' or `500pps from any given source address' + with a single rule. + +config NETFILTER_XT_MATCH_HELPER + tristate '"helper" match support' + depends on NF_CONNTRACK + depends on NETFILTER_ADVANCED + help + Helper matching allows you to match packets in dynamic connections + tracked by a conntrack-helper, ie. nf_conntrack_ftp + + To compile it as a module, choose M here. If unsure, say Y. + +config NETFILTER_XT_MATCH_HL + tristate '"hl" hoplimit/TTL match support' + depends on NETFILTER_ADVANCED + help + HL matching allows you to match packets based on the hoplimit + in the IPv6 header, or the time-to-live field in the IPv4 + header of the packet. + +config NETFILTER_XT_MATCH_IPCOMP + tristate '"ipcomp" match support' + depends on NETFILTER_ADVANCED + help + This match extension allows you to match a range of CPIs(16 bits) + inside IPComp header of IPSec packets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_IPRANGE + tristate '"iprange" address range match support' + depends on NETFILTER_ADVANCED + help + This option adds a "iprange" match, which allows you to match based on + an IP address range. (Normal iptables only matches on single addresses + with an optional mask.) + + If unsure, say M. + +config NETFILTER_XT_MATCH_IPVS + tristate '"ipvs" match support' + depends on IP_VS + depends on NETFILTER_ADVANCED + depends on NF_CONNTRACK + help + This option allows you to match against IPVS properties of a packet. + + If unsure, say N. + +config NETFILTER_XT_MATCH_L2TP + tristate '"l2tp" match support' + depends on NETFILTER_ADVANCED + default L2TP + help + This option adds an "L2TP" match, which allows you to match against + L2TP protocol header fields. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_LENGTH + tristate '"length" match support' + depends on NETFILTER_ADVANCED + help + This option allows you to match the length of a packet against a + specific value or range of values. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_LIMIT + tristate '"limit" match support' + depends on NETFILTER_ADVANCED + help + limit matching allows you to control the rate at which a rule can be + matched: mainly useful in combination with the LOG target ("LOG + target support", below) and to avoid some Denial of Service attacks. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_MAC + tristate '"mac" address match support' + depends on NETFILTER_ADVANCED + help + MAC matching allows you to match packets based on the source + Ethernet address of the packet. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_MARK + tristate '"mark" match support' + depends on NETFILTER_ADVANCED + select NETFILTER_XT_MARK + help + This is a backwards-compat option for the user's convenience + (e.g. when running oldconfig). It selects + CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). + +config NETFILTER_XT_MATCH_MULTIPORT + tristate '"multiport" Multiple port match support' + depends on NETFILTER_ADVANCED + help + Multiport matching allows you to match TCP or UDP packets based on + a series of source or destination ports: normally a rule can only + match a single range of ports. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_NFACCT + tristate '"nfacct" match support' + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK_ACCT + help + This option allows you to use the extended accounting through + nfnetlink_acct. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_OSF + tristate '"osf" Passive OS fingerprint match' + depends on NETFILTER_ADVANCED + select NETFILTER_NETLINK_OSF + help + This option selects the Passive OS Fingerprinting match module + that allows to passively match the remote operating system by + analyzing incoming TCP SYN packets. + + Rules and loading software can be downloaded from + http://www.ioremap.net/projects/osf + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_OWNER + tristate '"owner" match support' + depends on NETFILTER_ADVANCED + help + Socket owner matching allows you to match locally-generated packets + based on who created the socket: the user or group. It is also + possible to check whether a socket actually exists. + +config NETFILTER_XT_MATCH_POLICY + tristate 'IPsec "policy" match support' + depends on XFRM + default m if NETFILTER_ADVANCED=n + help + Policy matching allows you to match packets based on the + IPsec policy that was used during decapsulation/will + be used during encapsulation. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_PHYSDEV + tristate '"physdev" match support' + depends on BRIDGE && BRIDGE_NETFILTER + depends on NETFILTER_ADVANCED + help + Physdev packet matching matches against the physical bridge ports + the IP packet arrived on or will leave by. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_PKTTYPE + tristate '"pkttype" packet type match support' + depends on NETFILTER_ADVANCED + help + Packet type matching allows you to match a packet by + its "class", eg. BROADCAST, MULTICAST, ... + + Typical usage: + iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_QUOTA + tristate '"quota" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `quota' match, which allows to match on a + byte counter. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_RATEEST + tristate '"rateest" match support' + depends on NETFILTER_ADVANCED + select NETFILTER_XT_TARGET_RATEEST + help + This option adds a `rateest' match, which allows to match on the + rate estimated by the RATEEST target. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_REALM + tristate '"realm" match support' + depends on NETFILTER_ADVANCED + select IP_ROUTE_CLASSID + help + This option adds a `realm' match, which allows you to use the realm + key from the routing subsystem inside iptables. + + This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option + in tc world. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_RECENT + tristate '"recent" match support' + depends on NETFILTER_ADVANCED + help + This match is used for creating one or many lists of recently + used addresses and then matching against that/those list(s). + + Short options are available by using 'iptables -m recent -h' + Official Website: <http://snowman.net/projects/ipt_recent/> + +config NETFILTER_XT_MATCH_SCTP + tristate '"sctp" protocol match support' + depends on NETFILTER_ADVANCED + default IP_SCTP + help + With this option enabled, you will be able to use the + `sctp' match in order to match on SCTP source/destination ports + and SCTP chunk types. + + If you want to compile it as a module, say M here and read + <file:Documentation/kbuild/modules.rst>. If unsure, say `N'. + +config NETFILTER_XT_MATCH_SOCKET + tristate '"socket" match support' + depends on NETFILTER_XTABLES + depends on NETFILTER_ADVANCED + depends on IPV6 || IPV6=n + depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n + select NF_SOCKET_IPV4 + select NF_SOCKET_IPV6 if IP6_NF_IPTABLES + select NF_DEFRAG_IPV4 + select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n + help + This option adds a `socket' match, which can be used to match + packets for which a TCP or UDP socket lookup finds a valid socket. + It can be used in combination with the MARK target and policy + routing to implement full featured non-locally bound sockets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_STATE + tristate '"state" match support' + depends on NF_CONNTRACK + default m if NETFILTER_ADVANCED=n + help + Connection state matching allows you to match packets based on their + relationship to a tracked connection (ie. previous packets). This + is a powerful tool for packet classification. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_STATISTIC + tristate '"statistic" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `statistic' match, which allows you to match + on packets periodically or randomly with a given percentage. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_STRING + tristate '"string" match support' + depends on NETFILTER_ADVANCED + select TEXTSEARCH + select TEXTSEARCH_KMP + select TEXTSEARCH_BM + select TEXTSEARCH_FSM + help + This option adds a `string' match, which allows you to look for + pattern matchings in packets. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_TCPMSS + tristate '"tcpmss" match support' + depends on NETFILTER_ADVANCED + help + This option adds a `tcpmss' match, which allows you to examine the + MSS value of TCP SYN packets, which control the maximum packet size + for that connection. + + To compile it as a module, choose M here. If unsure, say N. + +config NETFILTER_XT_MATCH_TIME + tristate '"time" match support' + depends on NETFILTER_ADVANCED + help + This option adds a "time" match, which allows you to match based on + the packet arrival time (at the machine which netfilter is running) + on) or departure time/date (for locally generated packets). + + If you say Y here, try `iptables -m time --help` for + more information. + + If you want to compile it as a module, say M here. + If unsure, say N. + +config NETFILTER_XT_MATCH_U32 + tristate '"u32" match support' + depends on NETFILTER_ADVANCED + help + u32 allows you to extract quantities of up to 4 bytes from a packet, + AND them with specified masks, shift them by specified amounts and + test whether the results are in any of a set of specified ranges. + The specification of what to extract is general enough to skip over + headers with lengths stored in the packet, as in IP or TCP header + lengths. + + Details and examples are in the kernel module source. + +endif # NETFILTER_XTABLES + +endmenu + +source "net/netfilter/ipset/Kconfig" + +source "net/netfilter/ipvs/Kconfig" |