diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net/netdevsim')
15 files changed, 5251 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh new file mode 100755 index 000000000..7f7d20f22 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink.sh @@ -0,0 +1,713 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="fw_flash_test params_test regions_test reload_test \ + netns_reload_test resource_test dev_info_test \ + empty_reporter_test dummy_reporter_test rate_test" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +BUS_ADDR=10 +PORT_COUNT=4 +VF_COUNT=4 +DEV_NAME=netdevsim$BUS_ADDR +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV_NAME/ +DL_HANDLE=netdevsim/$DEV_NAME + +wait_for_devlink() +{ + "$@" | grep -q $DL_HANDLE +} + +devlink_wait() +{ + local timeout=$1 + + busywait "$timeout" wait_for_devlink devlink dev +} + +fw_flash_test() +{ + RET=0 + + devlink dev flash $DL_HANDLE file dummy + check_err $? "Failed to flash with status updates on" + + devlink dev flash $DL_HANDLE file dummy component fw.mgmt + check_err $? "Failed to flash with component attribute" + + devlink dev flash $DL_HANDLE file dummy overwrite settings + check_fail $? "Flash with overwrite settings should be rejected" + + echo "1"> $DEBUGFS_DIR/fw_update_overwrite_mask + check_err $? "Failed to change allowed overwrite mask" + + devlink dev flash $DL_HANDLE file dummy overwrite settings + check_err $? "Failed to flash with settings overwrite enabled" + + devlink dev flash $DL_HANDLE file dummy overwrite identifiers + check_fail $? "Flash with overwrite settings should be identifiers" + + echo "3"> $DEBUGFS_DIR/fw_update_overwrite_mask + check_err $? "Failed to change allowed overwrite mask" + + devlink dev flash $DL_HANDLE file dummy overwrite identifiers overwrite settings + check_err $? "Failed to flash with settings and identifiers overwrite enabled" + + echo "n"> $DEBUGFS_DIR/fw_update_status + check_err $? "Failed to disable status updates" + + devlink dev flash $DL_HANDLE file dummy + check_err $? "Failed to flash with status updates off" + + log_test "fw flash test" +} + +param_get() +{ + local name=$1 + + cmd_jq "devlink dev param show $DL_HANDLE name $name -j" \ + '.[][][].values[] | select(.cmode == "driverinit").value' +} + +param_set() +{ + local name=$1 + local value=$2 + + devlink dev param set $DL_HANDLE name $name cmode driverinit value $value +} + +check_value() +{ + local name=$1 + local phase_name=$2 + local expected_param_value=$3 + local expected_debugfs_value=$4 + local value + + value=$(param_get $name) + check_err $? "Failed to get $name param value" + [ "$value" == "$expected_param_value" ] + check_err $? "Unexpected $phase_name $name param value" + value=$(<$DEBUGFS_DIR/$name) + check_err $? "Failed to get $name debugfs value" + [ "$value" == "$expected_debugfs_value" ] + check_err $? "Unexpected $phase_name $name debugfs value" +} + +params_test() +{ + RET=0 + + local max_macs + local test1 + + check_value max_macs initial 32 32 + check_value test1 initial true Y + + param_set max_macs 16 + check_err $? "Failed to set max_macs param value" + param_set test1 false + check_err $? "Failed to set test1 param value" + + check_value max_macs post-set 16 32 + check_value test1 post-set false Y + + devlink dev reload $DL_HANDLE + + check_value max_macs post-reload 16 16 + check_value test1 post-reload false N + + log_test "params test" +} + +check_region_size() +{ + local name=$1 + local size + + size=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].size') + check_err $? "Failed to get $name region size" + [ $size -eq 32768 ] + check_err $? "Invalid $name region size" +} + +check_region_snapshot_count() +{ + local name=$1 + local phase_name=$2 + local expected_count=$3 + local count + + count=$(devlink region show $DL_HANDLE/$name -j | jq -e -r '.[][].snapshot | length') + [ $count -eq $expected_count ] + check_err $? "Unexpected $phase_name snapshot count" +} + +regions_test() +{ + RET=0 + + local count + + check_region_size dummy + check_region_snapshot_count dummy initial 0 + + echo ""> $DEBUGFS_DIR/take_snapshot + check_err $? "Failed to take first dummy region snapshot" + check_region_snapshot_count dummy post-first-snapshot 1 + + echo ""> $DEBUGFS_DIR/take_snapshot + check_err $? "Failed to take second dummy region snapshot" + check_region_snapshot_count dummy post-second-snapshot 2 + + echo ""> $DEBUGFS_DIR/take_snapshot + check_err $? "Failed to take third dummy region snapshot" + check_region_snapshot_count dummy post-third-snapshot 3 + + devlink region del $DL_HANDLE/dummy snapshot 1 + check_err $? "Failed to delete first dummy region snapshot" + + check_region_snapshot_count dummy post-first-delete 2 + + devlink region new $DL_HANDLE/dummy snapshot 25 + check_err $? "Failed to create a new snapshot with id 25" + + check_region_snapshot_count dummy post-first-request 3 + + devlink region dump $DL_HANDLE/dummy snapshot 25 >> /dev/null + check_err $? "Failed to dump snapshot with id 25" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr 0 len 1 >> /dev/null + check_err $? "Failed to read snapshot with id 25 (1 byte)" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len 128 >> /dev/null + check_err $? "Failed to read snapshot with id 25 (128 bytes)" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr 128 len $((1<<32)) >> /dev/null + check_err $? "Failed to read snapshot with id 25 (oversized)" + + devlink region read $DL_HANDLE/dummy snapshot 25 addr $((1<<32)) len 128 >> /dev/null 2>&1 + check_fail $? "Bad read of snapshot with id 25 did not fail" + + devlink region del $DL_HANDLE/dummy snapshot 25 + check_err $? "Failed to delete snapshot with id 25" + + check_region_snapshot_count dummy post-second-delete 2 + + sid=$(devlink -j region new $DL_HANDLE/dummy | jq '.[][][][]') + check_err $? "Failed to create a new snapshot with id allocated by the kernel" + + check_region_snapshot_count dummy post-first-request 3 + + devlink region dump $DL_HANDLE/dummy snapshot $sid >> /dev/null + check_err $? "Failed to dump a snapshot with id allocated by the kernel" + + devlink region del $DL_HANDLE/dummy snapshot $sid + check_err $? "Failed to delete snapshot with id allocated by the kernel" + + check_region_snapshot_count dummy post-first-request 2 + + log_test "regions test" +} + +reload_test() +{ + RET=0 + + devlink dev reload $DL_HANDLE + check_err $? "Failed to reload" + + echo "y"> $DEBUGFS_DIR/fail_reload + check_err $? "Failed to setup devlink reload to fail" + + devlink dev reload $DL_HANDLE + check_fail $? "Unexpected success of devlink reload" + + echo "n"> $DEBUGFS_DIR/fail_reload + check_err $? "Failed to setup devlink reload not to fail" + + devlink dev reload $DL_HANDLE + check_err $? "Failed to reload after set not to fail" + + echo "y"> $DEBUGFS_DIR/dont_allow_reload + check_err $? "Failed to forbid devlink reload" + + devlink dev reload $DL_HANDLE + check_fail $? "Unexpected success of devlink reload" + + echo "n"> $DEBUGFS_DIR/dont_allow_reload + check_err $? "Failed to re-enable devlink reload" + + devlink dev reload $DL_HANDLE + check_err $? "Failed to reload after re-enable" + + log_test "reload test" +} + +netns_reload_test() +{ + RET=0 + + ip netns add testns1 + check_err $? "Failed add netns \"testns1\"" + ip netns add testns2 + check_err $? "Failed add netns \"testns2\"" + + devlink dev reload $DL_HANDLE netns testns1 + check_err $? "Failed to reload into netns \"testns1\"" + + devlink -N testns1 dev reload $DL_HANDLE netns testns2 + check_err $? "Failed to reload from netns \"testns1\" into netns \"testns2\"" + + ip netns del testns2 + ip netns del testns1 + + # Wait until netns async cleanup is done. + devlink_wait 2000 + + log_test "netns reload test" +} + +DUMMYDEV="dummytest" + +res_val_get() +{ + local netns=$1 + local parentname=$2 + local name=$3 + local type=$4 + + cmd_jq "devlink -N $netns resource show $DL_HANDLE -j" \ + ".[][][] | select(.name == \"$parentname\").resources[] \ + | select(.name == \"$name\").$type" +} + +resource_test() +{ + RET=0 + + ip netns add testns1 + check_err $? "Failed add netns \"testns1\"" + ip netns add testns2 + check_err $? "Failed add netns \"testns2\"" + + devlink dev reload $DL_HANDLE netns testns1 + check_err $? "Failed to reload into netns \"testns1\"" + + # Create dummy dev to add the address and routes on. + + ip -n testns1 link add name $DUMMYDEV type dummy + check_err $? "Failed create dummy device" + ip -n testns1 link set $DUMMYDEV up + check_err $? "Failed bring up dummy device" + ip -n testns1 a a 192.0.1.1/24 dev $DUMMYDEV + check_err $? "Failed add an IP address to dummy device" + + local occ=$(res_val_get testns1 IPv4 fib occ) + local limit=$((occ+1)) + + # Set fib size limit to handle one another route only. + + devlink -N testns1 resource set $DL_HANDLE path IPv4/fib size $limit + check_err $? "Failed to set IPv4/fib resource size" + local size_new=$(res_val_get testns1 IPv4 fib size_new) + [ "$size_new" -eq "$limit" ] + check_err $? "Unexpected \"size_new\" value (got $size_new, expected $limit)" + + devlink -N testns1 dev reload $DL_HANDLE + check_err $? "Failed to reload" + local size=$(res_val_get testns1 IPv4 fib size) + [ "$size" -eq "$limit" ] + check_err $? "Unexpected \"size\" value (got $size, expected $limit)" + + # Insert 2 routes, the first is going to be inserted, + # the second is expected to fail to be inserted. + + ip -n testns1 r a 192.0.2.0/24 via 192.0.1.2 + check_err $? "Failed to add route" + + ip -n testns1 r a 192.0.3.0/24 via 192.0.1.2 + check_fail $? "Unexpected successful route add over limit" + + # Now create another dummy in second network namespace and + # insert two routes. That is over the limit of the netdevsim + # instance in the first namespace. Move the netdevsim instance + # into the second namespace and expect it to fail. + + ip -n testns2 link add name $DUMMYDEV type dummy + check_err $? "Failed create dummy device" + ip -n testns2 link set $DUMMYDEV up + check_err $? "Failed bring up dummy device" + ip -n testns2 a a 192.0.1.1/24 dev $DUMMYDEV + check_err $? "Failed add an IP address to dummy device" + ip -n testns2 r a 192.0.2.0/24 via 192.0.1.2 + check_err $? "Failed to add route" + ip -n testns2 r a 192.0.3.0/24 via 192.0.1.2 + check_err $? "Failed to add route" + + devlink -N testns1 dev reload $DL_HANDLE netns testns2 + check_fail $? "Unexpected successful reload from netns \"testns1\" into netns \"testns2\"" + + devlink -N testns2 resource set $DL_HANDLE path IPv4/fib size ' -1' + check_err $? "Failed to reset IPv4/fib resource size" + + devlink -N testns2 dev reload $DL_HANDLE netns 1 + check_err $? "Failed to reload devlink back" + + ip netns del testns2 + ip netns del testns1 + + # Wait until netns async cleanup is done. + devlink_wait 2000 + + log_test "resource test" +} + +info_get() +{ + local name=$1 + + cmd_jq "devlink dev info $DL_HANDLE -j" ".[][][\"$name\"]" "-e" +} + +dev_info_test() +{ + RET=0 + + driver=$(info_get "driver") + check_err $? "Failed to get driver name" + [ "$driver" == "netdevsim" ] + check_err $? "Unexpected driver name $driver" + + log_test "dev_info test" +} + +empty_reporter_test() +{ + RET=0 + + devlink health show $DL_HANDLE reporter empty >/dev/null + check_err $? "Failed show empty reporter" + + devlink health dump show $DL_HANDLE reporter empty >/dev/null + check_err $? "Failed show dump of empty reporter" + + devlink health diagnose $DL_HANDLE reporter empty >/dev/null + check_err $? "Failed diagnose empty reporter" + + devlink health recover $DL_HANDLE reporter empty + check_err $? "Failed recover empty reporter" + + log_test "empty reporter test" +} + +check_reporter_info() +{ + local name=$1 + local expected_state=$2 + local expected_error=$3 + local expected_recover=$4 + local expected_grace_period=$5 + local expected_auto_recover=$6 + + local show=$(devlink health show $DL_HANDLE reporter $name -j | jq -e -r ".[][][]") + check_err $? "Failed show $name reporter" + + local state=$(echo $show | jq -r ".state") + [ "$state" == "$expected_state" ] + check_err $? "Unexpected \"state\" value (got $state, expected $expected_state)" + + local error=$(echo $show | jq -r ".error") + [ "$error" == "$expected_error" ] + check_err $? "Unexpected \"error\" value (got $error, expected $expected_error)" + + local recover=`echo $show | jq -r ".recover"` + [ "$recover" == "$expected_recover" ] + check_err $? "Unexpected \"recover\" value (got $recover, expected $expected_recover)" + + local grace_period=$(echo $show | jq -r ".grace_period") + check_err $? "Failed get $name reporter grace_period" + [ "$grace_period" == "$expected_grace_period" ] + check_err $? "Unexpected \"grace_period\" value (got $grace_period, expected $expected_grace_period)" + + local auto_recover=$(echo $show | jq -r ".auto_recover") + [ "$auto_recover" == "$expected_auto_recover" ] + check_err $? "Unexpected \"auto_recover\" value (got $auto_recover, expected $expected_auto_recover)" +} + +dummy_reporter_test() +{ + RET=0 + + check_reporter_info dummy healthy 0 0 0 true + + devlink health set $DL_HANDLE reporter dummy auto_recover false + check_err $? "Failed to dummy reporter auto_recover option" + + check_reporter_info dummy healthy 0 0 0 false + + local BREAK_MSG="foo bar" + echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health + check_err $? "Failed to break dummy reporter" + + check_reporter_info dummy error 1 0 0 false + + local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) + check_err $? "Failed show dump of dummy reporter" + + local dump_break_msg=$(echo $dump | jq -r ".break_message") + [ "$dump_break_msg" == "$BREAK_MSG" ] + check_err $? "Unexpected dump break message value (got $dump_break_msg, expected $BREAK_MSG)" + + devlink health dump clear $DL_HANDLE reporter dummy + check_err $? "Failed clear dump of dummy reporter" + + devlink health recover $DL_HANDLE reporter dummy + check_err $? "Failed recover dummy reporter" + + check_reporter_info dummy healthy 1 1 0 false + + devlink health set $DL_HANDLE reporter dummy auto_recover true + check_err $? "Failed to dummy reporter auto_recover option" + + check_reporter_info dummy healthy 1 1 0 true + + echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health + check_err $? "Failed to break dummy reporter" + + check_reporter_info dummy healthy 2 2 0 true + + local diagnose=$(devlink health diagnose $DL_HANDLE reporter dummy -j -p) + check_err $? "Failed show diagnose of dummy reporter" + + local rcvrd_break_msg=$(echo $diagnose | jq -r ".recovered_break_message") + [ "$rcvrd_break_msg" == "$BREAK_MSG" ] + check_err $? "Unexpected recovered break message value (got $rcvrd_break_msg, expected $BREAK_MSG)" + + devlink health set $DL_HANDLE reporter dummy grace_period 10 + check_err $? "Failed to dummy reporter grace_period option" + + check_reporter_info dummy healthy 2 2 10 true + + echo "Y"> $DEBUGFS_DIR/health/fail_recover + check_err $? "Failed set dummy reporter recovery to fail" + + echo "$BREAK_MSG"> $DEBUGFS_DIR/health/break_health + check_fail $? "Unexpected success of dummy reporter break" + + check_reporter_info dummy error 3 2 10 true + + devlink health recover $DL_HANDLE reporter dummy + check_fail $? "Unexpected success of dummy reporter recover" + + echo "N"> $DEBUGFS_DIR/health/fail_recover + check_err $? "Failed set dummy reporter recovery to be successful" + + devlink health recover $DL_HANDLE reporter dummy + check_err $? "Failed recover dummy reporter" + + check_reporter_info dummy healthy 3 3 10 true + + echo 8192 > $DEBUGFS_DIR/health/binary_len + check_err $? "Failed set dummy reporter binary len to 8192" + + local dump=$(devlink health dump show $DL_HANDLE reporter dummy -j) + check_err $? "Failed show dump of dummy reporter" + + devlink health dump clear $DL_HANDLE reporter dummy + check_err $? "Failed clear dump of dummy reporter" + + log_test "dummy reporter test" +} + +rate_leafs_get() +{ + local handle=$1 + + cmd_jq "devlink port function rate show -j" \ + '.[] | to_entries | .[] | select(.value.type == "leaf") | .key | select(contains("'$handle'"))' +} + +rate_nodes_get() +{ + local handle=$1 + + cmd_jq "devlink port function rate show -j" \ + '.[] | to_entries | .[] | select(.value.type == "node") | .key | select(contains("'$handle'"))' +} + +rate_attr_set() +{ + local handle=$1 + local name=$2 + local value=$3 + local units=$4 + + devlink port function rate set $handle $name $value$units +} + +rate_attr_get() +{ + local handle=$1 + local name=$2 + + cmd_jq "devlink port function rate show $handle -j" '.[][].'$name +} + +rate_attr_tx_rate_check() +{ + local handle=$1 + local name=$2 + local rate=$3 + local debug_file=$4 + + rate_attr_set $handle $name $rate mbit + check_err $? "Failed to set $name value" + + local debug_value=$(cat $debug_file) + check_err $? "Failed to read $name value from debugfs" + [ "$debug_value" == "$rate" ] + check_err $? "Unexpected $name debug value $debug_value != $rate" + + local api_value=$(( $(rate_attr_get $handle $name) * 8 / 1000000 )) + check_err $? "Failed to get $name attr value" + [ "$api_value" == "$rate" ] + check_err $? "Unexpected $name attr value $api_value != $rate" +} + +rate_attr_parent_check() +{ + local handle=$1 + local parent=$2 + local debug_file=$3 + + rate_attr_set $handle parent $parent + check_err $? "Failed to set parent" + + debug_value=$(cat $debug_file) + check_err $? "Failed to get parent debugfs value" + [ "$debug_value" == "$parent" ] + check_err $? "Unexpected parent debug value $debug_value != $parent" + + api_value=$(rate_attr_get $r_obj parent) + check_err $? "Failed to get parent attr value" + [ "$api_value" == "$parent" ] + check_err $? "Unexpected parent attr value $api_value != $parent" +} + +rate_node_add() +{ + local handle=$1 + + devlink port function rate add $handle +} + +rate_node_del() +{ + local handle=$1 + + devlink port function rate del $handle +} + +rate_test() +{ + RET=0 + + echo $VF_COUNT > /sys/bus/netdevsim/devices/$DEV_NAME/sriov_numvfs + devlink dev eswitch set $DL_HANDLE mode switchdev + local leafs=`rate_leafs_get $DL_HANDLE` + local num_leafs=`echo $leafs | wc -w` + [ "$num_leafs" == "$VF_COUNT" ] + check_err $? "Expected $VF_COUNT rate leafs but got $num_leafs" + + rate=10 + for r_obj in $leafs + do + rate_attr_tx_rate_check $r_obj tx_share $rate \ + $DEBUGFS_DIR/ports/${r_obj##*/}/tx_share + rate=$(($rate+10)) + done + + rate=100 + for r_obj in $leafs + do + rate_attr_tx_rate_check $r_obj tx_max $rate \ + $DEBUGFS_DIR/ports/${r_obj##*/}/tx_max + rate=$(($rate+100)) + done + + local node1_name='group1' + local node1="$DL_HANDLE/$node1_name" + rate_node_add "$node1" + check_err $? "Failed to add node $node1" + + local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` + [ $num_nodes == 1 ] + check_err $? "Expected 1 rate node in output but got $num_nodes" + + local node_tx_share=10 + rate_attr_tx_rate_check $node1 tx_share $node_tx_share \ + $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_share + + local node_tx_max=100 + rate_attr_tx_rate_check $node1 tx_max $node_tx_max \ + $DEBUGFS_DIR/rate_nodes/${node1##*/}/tx_max + + rate_node_del "$node1" + check_err $? "Failed to delete node $node1" + local num_nodes=`rate_nodes_get $DL_HANDLE | wc -w` + [ $num_nodes == 0 ] + check_err $? "Expected 0 rate node but got $num_nodes" + + local node1_name='group1' + local node1="$DL_HANDLE/$node1_name" + rate_node_add "$node1" + check_err $? "Failed to add node $node1" + + rate_attr_parent_check $r_obj $node1_name \ + $DEBUGFS_DIR/ports/${r_obj##*/}/rate_parent + + local node2_name='group2' + local node2="$DL_HANDLE/$node2_name" + rate_node_add "$node2" + check_err $? "Failed to add node $node2" + + rate_attr_parent_check $node2 $node1_name \ + $DEBUGFS_DIR/rate_nodes/$node2_name/rate_parent + rate_node_del "$node2" + check_err $? "Failed to delete node $node2" + rate_attr_set "$r_obj" noparent + check_err $? "Failed to unset $r_obj parent node" + rate_node_del "$node1" + check_err $? "Failed to delete node $node1" + + log_test "rate test" +} + +setup_prepare() +{ + modprobe netdevsim + echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done +} + +cleanup() +{ + pre_cleanup + echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device + modprobe -r netdevsim +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh new file mode 100755 index 000000000..7effd3536 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_in_netns.sh @@ -0,0 +1,72 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="check_devlink_test check_ports_test" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +BUS_ADDR=10 +PORT_COUNT=4 +DEV_NAME=netdevsim$BUS_ADDR +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV_NAME/net/ +DL_HANDLE=netdevsim/$DEV_NAME +NETNS_NAME=testns1 + +port_netdev_get() +{ + local port_index=$1 + + cmd_jq "devlink -N $NETNS_NAME port show -j" \ + ".[][\"$DL_HANDLE/$port_index\"].netdev" "-e" +} + +check_ports_test() +{ + RET=0 + + for i in $(seq 0 $(expr $PORT_COUNT - 1)); do + netdev_name=$(port_netdev_get $i) + check_err $? "Failed to get netdev name for port $DL_HANDLE/$i" + ip -n $NETNS_NAME link show $netdev_name &> /dev/null + check_err $? "Failed to find netdev $netdev_name" + done + + log_test "check ports test" +} + +check_devlink_test() +{ + RET=0 + + devlink -N $NETNS_NAME dev show $DL_HANDLE &> /dev/null + check_err $? "Failed to show devlink instance" + + log_test "check devlink test" +} + +setup_prepare() +{ + modprobe netdevsim + ip netns add $NETNS_NAME + ip netns exec $NETNS_NAME \ + echo "$BUS_ADDR $PORT_COUNT" > /sys/bus/netdevsim/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done +} + +cleanup() +{ + pre_cleanup + echo "$BUS_ADDR" > /sys/bus/netdevsim/del_device + ip netns del $NETNS_NAME + modprobe -r netdevsim +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh new file mode 100755 index 000000000..109900c81 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh @@ -0,0 +1,501 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking devlink-trap functionality. It makes use of +# netdevsim which implements the required callbacks. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + init_test + trap_action_test + trap_metadata_test + bad_trap_test + bad_trap_action_test + trap_stats_test + trap_group_action_test + bad_trap_group_test + trap_group_stats_test + trap_policer_test + trap_policer_bind_test + port_del_test + dev_del_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +SLEEP_TIME=1 +NETDEV="" +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +require_command udevadm + +modprobe netdevsim &> /dev/null +if [ ! -d "$NETDEVSIM_PATH" ]; then + echo "SKIP: No netdevsim support" + exit 1 +fi + +if [ -d "${NETDEVSIM_PATH}/devices/netdevsim${DEV_ADDR}" ]; then + echo "SKIP: Device netdevsim${DEV_ADDR} already exists" + exit 1 +fi + +init_test() +{ + RET=0 + + test $(devlink_traps_num_get) -ne 0 + check_err $? "No traps were registered" + + log_test "Initialization" +} + +trap_action_test() +{ + local orig_action + local trap_name + local action + + RET=0 + + for trap_name in $(devlink_traps_get); do + # The action of non-drop traps cannot be changed. + if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then + devlink_trap_action_set $trap_name "trap" + action=$(devlink_trap_action_get $trap_name) + if [ $action != "trap" ]; then + check_err 1 "Trap $trap_name did not change action to trap" + fi + + devlink_trap_action_set $trap_name "drop" + action=$(devlink_trap_action_get $trap_name) + if [ $action != "drop" ]; then + check_err 1 "Trap $trap_name did not change action to drop" + fi + else + orig_action=$(devlink_trap_action_get $trap_name) + + devlink_trap_action_set $trap_name "trap" + action=$(devlink_trap_action_get $trap_name) + if [ $action != $orig_action ]; then + check_err 1 "Trap $trap_name changed action when should not" + fi + + devlink_trap_action_set $trap_name "drop" + action=$(devlink_trap_action_get $trap_name) + if [ $action != $orig_action ]; then + check_err 1 "Trap $trap_name changed action when should not" + fi + fi + done + + log_test "Trap action" +} + +trap_metadata_test() +{ + local trap_name + + RET=0 + + for trap_name in $(devlink_traps_get); do + devlink_trap_metadata_test $trap_name "input_port" + check_err $? "Input port not reported as metadata of trap $trap_name" + if [ $trap_name == "ingress_flow_action_drop" ] || + [ $trap_name == "egress_flow_action_drop" ]; then + devlink_trap_metadata_test $trap_name "flow_action_cookie" + check_err $? "Flow action cookie not reported as metadata of trap $trap_name" + fi + done + + log_test "Trap metadata" +} + +bad_trap_test() +{ + RET=0 + + devlink_trap_action_set "made_up_trap" "drop" + check_fail $? "Did not get an error for non-existing trap" + + log_test "Non-existing trap" +} + +bad_trap_action_test() +{ + local traps_arr + local trap_name + + RET=0 + + # Pick first trap. + traps_arr=($(devlink_traps_get)) + trap_name=${traps_arr[0]} + + devlink_trap_action_set $trap_name "made_up_action" + check_fail $? "Did not get an error for non-existing trap action" + + log_test "Non-existing trap action" +} + +trap_stats_test() +{ + local trap_name + + RET=0 + + for trap_name in $(devlink_traps_get); do + devlink_trap_stats_idle_test $trap_name + check_err $? "Stats of trap $trap_name not idle when netdev down" + + ip link set dev $NETDEV up + + if [ $(devlink_trap_type_get $trap_name) = "drop" ]; then + devlink_trap_action_set $trap_name "trap" + devlink_trap_stats_idle_test $trap_name + check_fail $? "Stats of trap $trap_name idle when action is trap" + + devlink_trap_action_set $trap_name "drop" + devlink_trap_stats_idle_test $trap_name + check_err $? "Stats of trap $trap_name not idle when action is drop" + + echo "y"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_fail $? "Managed to read trap (hard dropped) statistics when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_drop_counter_get + devlink -s trap show $DEVLINK_DEV trap $trap_name &> /dev/null + check_err $? "Did not manage to read trap (hard dropped) statistics when should" + + devlink_trap_drop_stats_idle_test $trap_name + check_fail $? "Drop stats of trap $trap_name idle when should not" + else + devlink_trap_stats_idle_test $trap_name + check_fail $? "Stats of non-drop trap $trap_name idle when should not" + fi + + ip link set dev $NETDEV down + done + + log_test "Trap statistics" +} + +trap_group_action_test() +{ + local curr_group group_name + local trap_name + local trap_type + local action + + RET=0 + + for group_name in $(devlink_trap_groups_get); do + devlink_trap_group_action_set $group_name "trap" + + for trap_name in $(devlink_traps_get); do + curr_group=$(devlink_trap_group_get $trap_name) + if [ $curr_group != $group_name ]; then + continue + fi + + trap_type=$(devlink_trap_type_get $trap_name) + if [ $trap_type != "drop" ]; then + continue + fi + + action=$(devlink_trap_action_get $trap_name) + if [ $action != "trap" ]; then + check_err 1 "Trap $trap_name did not change action to trap" + fi + done + + devlink_trap_group_action_set $group_name "drop" + + for trap_name in $(devlink_traps_get); do + curr_group=$(devlink_trap_group_get $trap_name) + if [ $curr_group != $group_name ]; then + continue + fi + + trap_type=$(devlink_trap_type_get $trap_name) + if [ $trap_type != "drop" ]; then + continue + fi + + action=$(devlink_trap_action_get $trap_name) + if [ $action != "drop" ]; then + check_err 1 "Trap $trap_name did not change action to drop" + fi + done + done + + log_test "Trap group action" +} + +bad_trap_group_test() +{ + RET=0 + + devlink_trap_group_action_set "made_up_trap_group" "drop" + check_fail $? "Did not get an error for non-existing trap group" + + log_test "Non-existing trap group" +} + +trap_group_stats_test() +{ + local group_name + + RET=0 + + for group_name in $(devlink_trap_groups_get); do + devlink_trap_group_stats_idle_test $group_name + check_err $? "Stats of trap group $group_name not idle when netdev down" + + ip link set dev $NETDEV up + + devlink_trap_group_action_set $group_name "trap" + devlink_trap_group_stats_idle_test $group_name + check_fail $? "Stats of trap group $group_name idle when action is trap" + + devlink_trap_group_action_set $group_name "drop" + ip link set dev $NETDEV down + done + + log_test "Trap group statistics" +} + +trap_policer_test() +{ + local packets_t0 + local packets_t1 + + RET=0 + + if [ $(devlink_trap_policers_num_get) -eq 0 ]; then + check_err 1 "Failed to dump policers" + fi + + devlink trap policer set $DEVLINK_DEV policer 1337 &> /dev/null + check_fail $? "Did not get an error for setting a non-existing policer" + devlink trap policer show $DEVLINK_DEV policer 1337 &> /dev/null + check_fail $? "Did not get an error for getting a non-existing policer" + + devlink trap policer set $DEVLINK_DEV policer 1 rate 2000 burst 16 + check_err $? "Failed to set valid parameters for a valid policer" + if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then + check_err 1 "Policer rate was not changed" + fi + if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then + check_err 1 "Policer burst size was not changed" + fi + + devlink trap policer set $DEVLINK_DEV policer 1 rate 0 &> /dev/null + check_fail $? "Policer rate was changed to rate lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 rate 9000 &> /dev/null + check_fail $? "Policer rate was changed to rate higher than limit" + devlink trap policer set $DEVLINK_DEV policer 1 burst 2 &> /dev/null + check_fail $? "Policer burst size was changed to burst size lower than limit" + devlink trap policer set $DEVLINK_DEV policer 1 rate 65537 &> /dev/null + check_fail $? "Policer burst size was changed to burst size higher than limit" + echo "y" > $DEBUGFS_DIR/fail_trap_policer_set + devlink trap policer set $DEVLINK_DEV policer 1 rate 3000 &> /dev/null + check_fail $? "Managed to set policer rate when should not" + echo "n" > $DEBUGFS_DIR/fail_trap_policer_set + if [ $(devlink_trap_policer_rate_get 1) -ne 2000 ]; then + check_err 1 "Policer rate was changed to an invalid value" + fi + if [ $(devlink_trap_policer_burst_get 1) -ne 16 ]; then + check_err 1 "Policer burst size was changed to an invalid value" + fi + + packets_t0=$(devlink_trap_policer_rx_dropped_get 1) + sleep .5 + packets_t1=$(devlink_trap_policer_rx_dropped_get 1) + if [ ! $packets_t1 -gt $packets_t0 ]; then + check_err 1 "Policer drop counter was not incremented" + fi + + echo "y"> $DEBUGFS_DIR/fail_trap_policer_counter_get + devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null + check_fail $? "Managed to read policer drop counter when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_policer_counter_get + devlink -s trap policer show $DEVLINK_DEV policer 1 &> /dev/null + check_err $? "Did not manage to read policer drop counter when should" + + log_test "Trap policer" +} + +trap_group_check_policer() +{ + local group_name=$1; shift + + devlink -j -p trap group show $DEVLINK_DEV group $group_name \ + | jq -e '.[][][]["policer"]' &> /dev/null +} + +trap_policer_bind_test() +{ + RET=0 + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then + check_err 1 "Bound policer was not changed" + fi + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1337 \ + &> /dev/null + check_fail $? "Did not get an error for binding a non-existing policer" + if [ $(devlink_trap_group_policer_get "l2_drops") -ne 1 ]; then + check_err 1 "Bound policer was changed when should not" + fi + + devlink trap group set $DEVLINK_DEV group l2_drops policer 0 + check_err $? "Failed to unbind a policer when using ID 0" + trap_group_check_policer "l2_drops" + check_fail $? "Trap group has a policer after unbinding with ID 0" + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + + devlink trap group set $DEVLINK_DEV group l2_drops nopolicer + check_err $? "Failed to unbind a policer when using 'nopolicer' keyword" + trap_group_check_policer "l2_drops" + check_fail $? "Trap group has a policer after unbinding with 'nopolicer' keyword" + + devlink trap group set $DEVLINK_DEV group l2_drops policer 1 + check_err $? "Failed to bind a valid policer" + + echo "y"> $DEBUGFS_DIR/fail_trap_group_set + devlink trap group set $DEVLINK_DEV group l2_drops policer 2 \ + &> /dev/null + check_fail $? "Managed to bind a policer when should not" + echo "n"> $DEBUGFS_DIR/fail_trap_group_set + devlink trap group set $DEVLINK_DEV group l2_drops policer 2 + check_err $? "Did not manage to bind a policer when should" + + devlink trap group set $DEVLINK_DEV group l2_drops action drop \ + policer 1337 &> /dev/null + check_fail $? "Did not get an error for partially modified trap group" + + log_test "Trap policer binding" +} + +port_del_test() +{ + local group_name + local i + + # The test never fails. It is meant to exercise different code paths + # and make sure we properly dismantle a port while packets are + # in-flight. + RET=0 + + devlink_traps_enable_all + + for i in $(seq 1 10); do + ip link set dev $NETDEV up + + sleep $SLEEP_TIME + + netdevsim_port_destroy + netdevsim_port_create + udevadm settle + done + + devlink_traps_disable_all + + log_test "Port delete" +} + +dev_del_test() +{ + local group_name + local i + + # The test never fails. It is meant to exercise different code paths + # and make sure we properly unregister traps while packets are + # in-flight. + RET=0 + + devlink_traps_enable_all + + for i in $(seq 1 10); do + ip link set dev $NETDEV up + + sleep $SLEEP_TIME + + cleanup + setup_prepare + done + + devlink_traps_disable_all + + log_test "Device delete" +} + +netdevsim_dev_create() +{ + echo "$DEV_ADDR 0" > ${NETDEVSIM_PATH}/new_device +} + +netdevsim_dev_destroy() +{ + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device +} + +netdevsim_port_create() +{ + echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/new_port +} + +netdevsim_port_destroy() +{ + echo 1 > ${NETDEVSIM_PATH}/devices/${DEV}/del_port +} + +setup_prepare() +{ + local netdev + + netdevsim_dev_create + + if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}" ]; then + echo "Failed to create netdevsim device" + exit 1 + fi + + netdevsim_port_create + + if [ ! -d "${NETDEVSIM_PATH}/devices/${DEV}/net/" ]; then + echo "Failed to create netdevsim port" + exit 1 + fi + + # Wait for udev to rename newly created netdev. + udevadm settle + + NETDEV=$(ls ${NETDEVSIM_PATH}/devices/${DEV}/net/) +} + +cleanup() +{ + pre_cleanup + netdevsim_port_destroy + netdevsim_dev_destroy +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh new file mode 100755 index 000000000..9adfba8f8 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-coalesce.sh @@ -0,0 +1,132 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -c $NSIM_NETDEV | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[ \t]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q coalesce; then + echo "SKIP: No --coalesce support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx-frames-low"]="rx-frame-low" + ["tx-frames-low"]="tx-frame-low" + ["rx-frames-high"]="rx-frame-high" + ["tx-frames-high"]="tx-frame-high" + ["rx-usecs"]="rx-usecs" + ["rx-frames"]="rx-frames" + ["rx-usecs-irq"]="rx-usecs-irq" + ["rx-frames-irq"]="rx-frames-irq" + ["tx-usecs"]="tx-usecs" + ["tx-frames"]="tx-frames" + ["tx-usecs-irq"]="tx-usecs-irq" + ["tx-frames-irq"]="tx-frames-irq" + ["stats-block-usecs"]="stats-block-usecs" + ["pkt-rate-low"]="pkt-rate-low" + ["rx-usecs-low"]="rx-usecs-low" + ["tx-usecs-low"]="tx-usecs-low" + ["pkt-rate-high"]="pkt-rate-high" + ["rx-usecs-high"]="rx-usecs-high" + ["tx-usecs-high"]="tx-usecs-high" + ["sample-interval"]="sample-interval" +) + +declare -A CURRENT_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +declare -A EXPECTED_SETTINGS=( + ["rx-frames-low"]="" + ["tx-frames-low"]="" + ["rx-frames-high"]="" + ["tx-frames-high"]="" + ["rx-usecs"]="" + ["rx-frames"]="" + ["rx-usecs-irq"]="" + ["rx-frames-irq"]="" + ["tx-usecs"]="" + ["tx-frames"]="" + ["tx-usecs-irq"]="" + ["tx-frames-irq"]="" + ["stats-block-usecs"]="" + ["pkt-rate-low"]="" + ["rx-usecs-low"]="" + ["tx-usecs-low"]="" + ["pkt-rate-high"]="" + ["rx-usecs-high"]="" + ["tx-usecs-high"]="" + ["sample-interval"]="" +) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $((2**32-1)))) + + ethtool -C $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +# bool settings which ethtool displays on the same line +ethtool -C $NSIM_NETDEV adaptive-rx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: off") +check $? "$s" "" + +ethtool -C $NSIM_NETDEV adaptive-tx on +s=$(ethtool -c $NSIM_NETDEV | grep -q "Adaptive RX: on TX: on") +check $? "$s" "" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh new file mode 100644 index 000000000..922744059 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh @@ -0,0 +1,56 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +NSIM_ID=$((RANDOM % 1024)) +NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID +NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID/ports/0 +NSIM_NETDEV= +num_passes=0 +num_errors=0 + +function cleanup_nsim { + if [ -e $NSIM_DEV_SYS ]; then + echo $NSIM_ID > /sys/bus/netdevsim/del_device + fi +} + +function cleanup { + cleanup_nsim +} + +trap cleanup EXIT + +function check { + local code=$1 + local str=$2 + local exp_str=$3 + local exp_fail=$4 + + [ -z "$exp_fail" ] && cop="-ne" || cop="-eq" + + if [ $code $cop 0 ]; then + ((num_errors++)) + return + fi + + if [ "$str" != "$exp_str" ]; then + echo -e "Expected: '$exp_str', got '$str'" + ((num_errors++)) + return + fi + + ((num_passes++)) +} + +function make_netdev { + # Make a netdevsim + old_netdevs=$(ls /sys/class/net) + + if ! $(lsmod | grep -q netdevsim); then + modprobe netdevsim + fi + + echo $NSIM_ID $@ > /sys/bus/netdevsim/new_device + # get new device name + ls /sys/bus/netdevsim/devices/netdevsim${NSIM_ID}/net/ +} diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh new file mode 100755 index 000000000..0c56746e9 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -0,0 +1,110 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) +[ a$ETHTOOL == a ] && ETHTOOL=ethtool + +set -o pipefail + +# netdevsim starts out with None/None +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: None +Active FEC encoding: None" + +# Test Auto +$ETHTOOL --set-fec $NSIM_NETDEV encoding auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: Auto +Active FEC encoding: Off" + +# Test case in-sensitivity +for o in off Off OFF; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: Off +Active FEC encoding: Off" +done + +for o in BaseR baser BAser; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: BaseR +Active FEC encoding: BaseR" +done + +for o in llrs rs; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: ${o^^} +Active FEC encoding: ${o^^}" +done + +# Test mutliple bits +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: RS LLRS +Active FEC encoding: LLRS" + +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs off auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: Auto Off RS +Active FEC encoding: RS" + +# Make sure other link modes are rejected +$ETHTOOL --set-fec $NSIM_NETDEV encoding FIBRE 2>/dev/null +check $? '' '' 1 + +$ETHTOOL --set-fec $NSIM_NETDEV encoding bla-bla-bla 2>/dev/null +check $? '' '' 1 + +# Try JSON +$ETHTOOL --json --show-fec $NSIM_NETDEV | jq empty >>/dev/null 2>&1 +if [ $? -eq 0 ]; then + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"Off"' + + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto RS + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto" +"RS"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"RS"' +fi + +# Test error injection +echo 11 > $NSIM_DEV_DFS/ethtool/get_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? '' '' 1 + +echo 0 > $NSIM_DEV_DFS/ethtool/get_err +echo 11 > $NSIM_DEV_DFS/ethtool/set_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? + +$ETHTOOL --set-fec $NSIM_NETDEV encoding RS 2>/dev/null +check $? '' '' 1 + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh new file mode 100755 index 000000000..b4a7abfe5 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-pause.sh @@ -0,0 +1,49 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +# Bail if ethtool is too old +if ! ethtool -h | grep include-stat 2>&1 >/dev/null; then + echo "SKIP: No --include-statistics support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx +echo n > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx + +s=$(ethtool --json -a $NSIM_NETDEV | jq '.[].statistics') +check $? "$s" "null" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics') +check $? "$s" "{}" + +echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_tx + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length') +check $? "$s" "1" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames') +check $? "$s" "2" + +echo y > $NSIM_DEV_DFS/ethtool/pause/report_stats_rx + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics | length') +check $? "$s" "2" + +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.rx_pause_frames') +check $? "$s" "1" +s=$(ethtool -I --json -a $NSIM_NETDEV | jq '.[].statistics.tx_pause_frames') +check $? "$s" "2" + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh new file mode 100755 index 000000000..c969559ff --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-ring.sh @@ -0,0 +1,85 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +function get_value { + local query="${SETTINGS_MAP[$1]}" + + echo $(ethtool -g $NSIM_NETDEV | \ + tail -n +$CURR_SETT_LINE | \ + awk -F':' -v pattern="$query:" '$0 ~ pattern {gsub(/[\t ]/, "", $2); print $2}') +} + +function update_current_settings { + for key in ${!SETTINGS_MAP[@]}; do + CURRENT_SETTINGS[$key]=$(get_value $key) + done + echo ${CURRENT_SETTINGS[@]} +} + +if ! ethtool -h | grep -q set-ring >/dev/null; then + echo "SKIP: No --set-ring support in ethtool" + exit 4 +fi + +NSIM_NETDEV=$(make_netdev) + +set -o pipefail + +declare -A SETTINGS_MAP=( + ["rx"]="RX" + ["rx-mini"]="RX Mini" + ["rx-jumbo"]="RX Jumbo" + ["tx"]="TX" +) + +declare -A EXPECTED_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +declare -A CURRENT_SETTINGS=( + ["rx"]="" + ["rx-mini"]="" + ["rx-jumbo"]="" + ["tx"]="" +) + +MAX_VALUE=$((RANDOM % $((2**32-1)))) +RING_MAX_LIST=$(ls $NSIM_DEV_DFS/ethtool/ring/) + +for ring_max_entry in $RING_MAX_LIST; do + echo $MAX_VALUE > $NSIM_DEV_DFS/ethtool/ring/$ring_max_entry +done + +CURR_SETT_LINE=$(ethtool -g $NSIM_NETDEV | grep -i -m1 -n 'Current hardware settings' | cut -f1 -d:) + +# populate the expected settings map +for key in ${!SETTINGS_MAP[@]}; do + EXPECTED_SETTINGS[$key]=$(get_value $key) +done + +# test +for key in ${!SETTINGS_MAP[@]}; do + value=$((RANDOM % $MAX_VALUE)) + + ethtool -G $NSIM_NETDEV "$key" "$value" + + EXPECTED_SETTINGS[$key]="$value" + expected=${EXPECTED_SETTINGS[@]} + current=$(update_current_settings) + + check $? "$current" "$expected" + set +x +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib.sh b/tools/testing/selftests/drivers/net/netdevsim/fib.sh new file mode 100755 index 000000000..6800de816 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/fib.sh @@ -0,0 +1,402 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the FIB offload API. It makes use of netdevsim +# which registers a listener to the FIB notification chain. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_identical_routes + ipv4_tos + ipv4_metric + ipv4_replace + ipv4_delete + ipv4_plen + ipv4_replay + ipv4_flush + ipv4_error_path + ipv4_delete_fail + ipv6_add + ipv6_metric + ipv6_append_single + ipv6_replace_single + ipv6_metric_multipath + ipv6_append_multipath + ipv6_replace_multipath + ipv6_append_multipath_to_single + ipv6_delete_single + ipv6_delete_multipath + ipv6_replay_single + ipv6_replay_multipath + ipv6_error_path + ipv6_delete_fail +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/fib_offload_lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +ipv4_identical_routes() +{ + fib_ipv4_identical_routes_test "testns1" +} + +ipv4_tos() +{ + fib_ipv4_tos_test "testns1" +} + +ipv4_metric() +{ + fib_ipv4_metric_test "testns1" +} + +ipv4_replace() +{ + fib_ipv4_replace_test "testns1" +} + +ipv4_delete() +{ + fib_ipv4_delete_test "testns1" +} + +ipv4_plen() +{ + fib_ipv4_plen_test "testns1" +} + +ipv4_replay_metric() +{ + fib_ipv4_replay_metric_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_tos() +{ + fib_ipv4_replay_tos_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay_plen() +{ + fib_ipv4_replay_plen_test "testns1" "$DEVLINK_DEV" +} + +ipv4_replay() +{ + ipv4_replay_metric + ipv4_replay_tos + ipv4_replay_plen +} + +ipv4_flush() +{ + fib_ipv4_flush_test "testns1" +} + +ipv4_error_path_add() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 192.0.2.${lsb}/32 dev dummy1 \ + &> /dev/null + done + + log_test "IPv4 error path - add" + + ip -n testns1 link del dev dummy1 +} + +ipv4_error_path_replay() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 192.0.2.${lsb}/32 dev dummy1 + done + + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV &> /dev/null + + log_test "IPv4 error path - replay" + + ip -n testns1 link del dev dummy1 + + # Successfully reload after deleting all the routes. + devlink -N testns1 resource set $DEVLINK_DEV path IPv4/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV +} + +ipv4_error_path() +{ + # Test the different error paths of the notifiers by limiting the size + # of the "IPv4/fib" resource. + ipv4_error_path_add + ipv4_error_path_replay +} + +ipv4_delete_fail() +{ + RET=0 + + echo "y" > $DEBUGFS_DIR/fib/fail_route_delete + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + ip -n testns1 route add 192.0.2.0/24 dev dummy1 + ip -n testns1 route del 192.0.2.0/24 dev dummy1 &> /dev/null + + # We should not be able to delete the netdev if we are leaking a + # reference. + ip -n testns1 link del dev dummy1 + + log_test "IPv4 route delete failure" + + echo "n" > $DEBUGFS_DIR/fib/fail_route_delete +} + +ipv6_add() +{ + fib_ipv6_add_test "testns1" +} + +ipv6_metric() +{ + fib_ipv6_metric_test "testns1" +} + +ipv6_append_single() +{ + fib_ipv6_append_single_test "testns1" +} + +ipv6_replace_single() +{ + fib_ipv6_replace_single_test "testns1" +} + +ipv6_metric_multipath() +{ + fib_ipv6_metric_multipath_test "testns1" +} + +ipv6_append_multipath() +{ + fib_ipv6_append_multipath_test "testns1" +} + +ipv6_replace_multipath() +{ + fib_ipv6_replace_multipath_test "testns1" +} + +ipv6_append_multipath_to_single() +{ + fib_ipv6_append_multipath_to_single_test "testns1" +} + +ipv6_delete_single() +{ + fib_ipv6_delete_single_test "testns1" +} + +ipv6_delete_multipath() +{ + fib_ipv6_delete_multipath_test "testns1" +} + +ipv6_replay_single() +{ + fib_ipv6_replay_single_test "testns1" "$DEVLINK_DEV" +} + +ipv6_replay_multipath() +{ + fib_ipv6_replay_multipath_test "testns1" "$DEVLINK_DEV" +} + +ipv6_error_path_add_single() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 2001:db8:1::${lsb}/128 dev dummy1 \ + &> /dev/null + done + + log_test "IPv6 error path - add single" + + ip -n testns1 link del dev dummy1 +} + +ipv6_error_path_add_multipath() +{ + local lsb + + RET=0 + + for i in $(seq 1 2); do + ip -n testns1 link add name dummy$i type dummy + ip -n testns1 link set dev dummy$i up + ip -n testns1 address add 2001:db8:$i::1/64 dev dummy$i + done + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 2001:db8:10::${lsb}/128 \ + nexthop via 2001:db8:1::2 dev dummy1 \ + nexthop via 2001:db8:2::2 dev dummy2 &> /dev/null + done + + log_test "IPv6 error path - add multipath" + + for i in $(seq 1 2); do + ip -n testns1 link del dev dummy$i + done +} + +ipv6_error_path_replay() +{ + local lsb + + RET=0 + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV + + for lsb in $(seq 1 20); do + ip -n testns1 route add 2001:db8:1::${lsb}/128 dev dummy1 + done + + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 10 + devlink -N testns1 dev reload $DEVLINK_DEV &> /dev/null + + log_test "IPv6 error path - replay" + + ip -n testns1 link del dev dummy1 + + # Successfully reload after deleting all the routes. + devlink -N testns1 resource set $DEVLINK_DEV path IPv6/fib size 100 + devlink -N testns1 dev reload $DEVLINK_DEV +} + +ipv6_error_path() +{ + # Test the different error paths of the notifiers by limiting the size + # of the "IPv6/fib" resource. + ipv6_error_path_add_single + ipv6_error_path_add_multipath + ipv6_error_path_replay +} + +ipv6_delete_fail() +{ + RET=0 + + echo "y" > $DEBUGFS_DIR/fib/fail_route_delete + + ip -n testns1 link add name dummy1 type dummy + ip -n testns1 link set dev dummy1 up + + ip -n testns1 route add 2001:db8:1::/64 dev dummy1 + ip -n testns1 route del 2001:db8:1::/64 dev dummy1 &> /dev/null + + # We should not be able to delete the netdev if we are leaking a + # reference. + ip -n testns1 link del dev dummy1 + + log_test "IPv6 route delete failure" + + echo "n" > $DEBUGFS_DIR/fib/fail_route_delete +} + +fib_notify_on_flag_change_set() +{ + local notify=$1; shift + + ip netns exec testns1 sysctl -qw net.ipv4.fib_notify_on_flag_change=$notify + ip netns exec testns1 sysctl -qw net.ipv6.fib_notify_on_flag_change=$notify + + log_info "Set fib_notify_on_flag_change to $notify" +} + +setup_prepare() +{ + local netdev + + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + ip netns add testns1 + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi +} + +cleanup() +{ + pre_cleanup + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +fib_notify_on_flag_change_set 1 +tests_run + +fib_notify_on_flag_change_set 0 +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh new file mode 100755 index 000000000..8d91191a0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/fib_notifications.sh @@ -0,0 +1,430 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + ipv4_route_addition_test + ipv4_route_deletion_test + ipv4_route_replacement_test + ipv4_route_offload_failed_test + ipv6_route_addition_test + ipv6_route_deletion_test + ipv6_route_replacement_test + ipv6_route_offload_failed_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEVLINK_DEV=netdevsim/${DEV} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +check_rt_offload_failed() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without + # RTM_F_OFFLOAD_FAILED flag and the second with RTM_F_OFFLOAD_FAILED + # flag + head -n 1 $outfile | grep -q "rt_offload_failed" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_offload_failed" +} + +check_rt_trap() +{ + local outfile=$1; shift + local line + + # Make sure that the first notification was emitted without RTM_F_TRAP + # flag and the second with RTM_F_TRAP flag + head -n 1 $outfile | grep -q "rt_trap" + if [[ $? -eq 0 ]]; then + return 1 + fi + + head -n 2 $outfile | tail -n 1 | grep -q "rt_trap" +} + +route_notify_check() +{ + local outfile=$1; shift + local expected_num_lines=$1; shift + local offload_failed=${1:-0}; shift + + # check the monitor results + lines=`wc -l $outfile | cut "-d " -f1` + test $lines -eq $expected_num_lines + check_err $? "$expected_num_lines notifications were expected but $lines were received" + + if [[ $expected_num_lines -eq 1 ]]; then + return + fi + + if [[ $offload_failed -eq 0 ]]; then + check_rt_trap $outfile + check_err $? "Wrong RTM_F_TRAP flags in notifications" + else + check_rt_offload_failed $outfile + check_err $? "Wrong RTM_F_OFFLOAD_FAILED flags in notifications" + fi +} + +route_addition_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + local offload_failed=${1:-0}; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route add $route dev dummy1 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications $offload_failed + rm -f $outfile + + $IP route del $route dev dummy1 +} + +ipv4_route_addition_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + # route_addition_check will assign value to RET. + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route addition" +} + +route_deletion_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route del $route dev dummy1 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile +} + +ipv4_route_deletion_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + # route_deletion_check will assign value to RET. + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv4 route deletion" +} + +route_replacement_check() +{ + local ip=$1; shift + local notify=$1; shift + local route=$1; shift + local expected_num_notifications=$1; shift + + ip netns exec testns1 sysctl -qw net.$ip.fib_notify_on_flag_change=$notify + $IP route add $route dev dummy1 + sleep 1 + + local outfile=$(mktemp) + + $IP monitor route &> $outfile & + sleep 1 + $IP route replace $route dev dummy2 + sleep 1 + kill %% && wait %% &> /dev/null + + route_notify_check $outfile $expected_num_notifications + rm -f $outfile + + $IP route del $route dev dummy2 +} + +ipv4_route_replacement_test() +{ + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + # route_replacement_check will assign value to RET. + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv4 route replacement" +} + +ipv4_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv4" + local route=192.0.2.0/24 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv4 route offload failed" +} + +ipv6_route_addition_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the programmed route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the programmed + # route. + notify=2 + expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route addition" +} + +ipv6_route_deletion_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local expected_num_notifications=1 + + # Make sure a single notification will be emitted for the deleted route, + # regardless of fib_notify_on_flag_change value. + local notify=0 + route_deletion_check $ip $notify $route $expected_num_notifications + + notify=1 + route_deletion_check $ip $notify $route $expected_num_notifications + + log_test "IPv6 route deletion" +} + +ipv6_route_replacement_test() +{ + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + + $IP link add name dummy2 type dummy + $IP link set dev dummy2 up + + # Make sure a single notification will be emitted for the new route. + local notify=0 + local expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_replacement_check $ip $notify $route $expected_num_notifications + + # notify=2 means emit notifications only for failed route installation, + # make sure a single notification will be emitted for the new route. + notify=2 + expected_num_notifications=1 + route_replacement_check $ip $notify $route $expected_num_notifications + + $IP link del name dummy2 + + log_test "IPv6 route replacement" +} + +ipv6_route_offload_failed_test() +{ + + RET=0 + + local ip="ipv6" + local route=2001:db8:1::/64 + local offload_failed=1 + + echo "y"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload to fail" + + # Make sure a single notification will be emitted for the programmed + # route. + local notify=0 + local expected_num_notifications=1 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # Make sure two notifications will be emitted for the new route. + notify=1 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + # notify=2 means emit notifications only for failed route installation, + # make sure two notifications will be emitted for the new route. + notify=2 + expected_num_notifications=2 + route_addition_check $ip $notify $route $expected_num_notifications \ + $offload_failed + + echo "n"> $DEBUGFS_DIR/fib/fail_route_offload + check_err $? "Failed to setup route offload not to fail" + + log_test "IPv6 route offload failed" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + devlink dev reload $DEVLINK_DEV netns testns1 + + if [ $? -ne 0 ]; then + echo "Failed to reload into netns \"testns1\"" + exit 1 + fi + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh new file mode 100755 index 000000000..cba5ac084 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/hw_stats_l3.sh @@ -0,0 +1,421 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + l3_reporting_test + l3_fail_next_test + l3_counter_test + l3_rollback_test + l3_monitor_test +" + +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR_1=1337 +DEV_ADDR_2=1057 +DEV_ADDR_3=5417 +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DUMMY_IFINDEX= + +DEV_ADDR() +{ + local n=$1; shift + local var=DEV_ADDR_$n + + echo ${!var} +} + +DEV() +{ + echo netdevsim$(DEV_ADDR $1) +} + +DEVLINK_DEV() +{ + echo netdevsim/$(DEV $1) +} + +SYSFS_NET_DIR() +{ + echo /sys/bus/netdevsim/devices/$(DEV $1)/net/ +} + +DEBUGFS_DIR() +{ + echo /sys/kernel/debug/netdevsim/$(DEV $1)/ +} + +nsim_add() +{ + local n=$1; shift + + echo "$(DEV_ADDR $n) 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $(SYSFS_NET_DIR $n) ] ; do :; done +} + +nsim_reload() +{ + local n=$1; shift + local ns=$1; shift + + devlink dev reload $(DEVLINK_DEV $n) netns $ns + + if [ $? -ne 0 ]; then + echo "Failed to reload $(DEV $n) into netns \"testns1\"" + exit 1 + fi + +} + +nsim_del() +{ + local n=$1; shift + + echo "$(DEV_ADDR $n)" > ${NETDEVSIM_PATH}/del_device +} + +nsim_hwstats_toggle() +{ + local action=$1; shift + local instance=$1; shift + local netdev=$1; shift + local type=$1; shift + + local ifindex=$($IP -j link show dev $netdev | jq '.[].ifindex') + + echo $ifindex > $(DEBUGFS_DIR $instance)/hwstats/$type/$action +} + +nsim_hwstats_enable() +{ + nsim_hwstats_toggle enable_ifindex "$@" +} + +nsim_hwstats_disable() +{ + nsim_hwstats_toggle disable_ifindex "$@" +} + +nsim_hwstats_fail_next_enable() +{ + nsim_hwstats_toggle fail_next_enable "$@" +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + nsim_add 1 + nsim_add 2 + nsim_add 3 + + ip netns add testns1 + + if [ $? -ne 0 ]; then + echo "Failed to add netns \"testns1\"" + exit 1 + fi + + nsim_reload 1 testns1 + nsim_reload 2 testns1 + nsim_reload 3 testns1 + + IP="ip -n testns1" + + $IP link add name dummy1 type dummy + $IP link set dev dummy1 up + DUMMY_IFINDEX=$($IP -j link show dev dummy1 | jq '.[].ifindex') +} + +cleanup() +{ + pre_cleanup + + $IP link del name dummy1 + ip netns del testns1 + nsim_del 3 + nsim_del 2 + nsim_del 1 + modprobe -r netdevsim &> /dev/null +} + +netdev_hwstats_used() +{ + local netdev=$1; shift + local type=$1; shift + + $IP -j stats show dev "$netdev" group offload subgroup hw_stats_info | + jq '.[].info.l3_stats.used' +} + +netdev_check_used() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_used $netdev $type) == "true" ]] +} + +netdev_check_unused() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_used $netdev $type) == "false" ]] +} + +netdev_hwstats_request() +{ + local netdev=$1; shift + local type=$1; shift + + $IP -j stats show dev "$netdev" group offload subgroup hw_stats_info | + jq ".[].info.${type}_stats.request" +} + +netdev_check_requested() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_request $netdev $type) == "true" ]] +} + +netdev_check_unrequested() +{ + local netdev=$1; shift + local type=$1; shift + + [[ $(netdev_hwstats_request $netdev $type) == "false" ]] +} + +reporting_test() +{ + local type=$1; shift + local instance=1 + + RET=0 + + [[ -n $(netdev_hwstats_used dummy1 $type) ]] + check_err $? "$type stats not reported" + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before either device or netdevsim request" + + nsim_hwstats_enable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before device request" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested before device request" + + $IP stats set dev dummy1 ${type}_stats on + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + netdev_check_requested dummy1 $type + check_err $? "$type stats reported as not requested after device request" + + nsim_hwstats_disable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after netdevsim request withdrawn" + + nsim_hwstats_enable $instance dummy1 $type + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after netdevsim request reenabled" + + $IP stats set dev dummy1 ${type}_stats off + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after device request withdrawn" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after device request withdrawn" + + nsim_hwstats_disable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after both requests withdrawn" + + log_test "Reporting of $type stats usage" +} + +l3_reporting_test() +{ + reporting_test l3 +} + +__fail_next_test() +{ + local instance=$1; shift + local type=$1; shift + + RET=0 + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before either device or netdevsim request" + + nsim_hwstats_enable $instance dummy1 $type + nsim_hwstats_fail_next_enable $instance dummy1 $type + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used before device request" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested before device request" + + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after bounce" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after bounce" + + $IP stats set dev dummy1 ${type}_stats on + check_err $? "$type stats request failed when it shouldn't have" + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + netdev_check_requested dummy1 $type + check_err $? "$type stats reported as not requested after device request" + + $IP stats set dev dummy1 ${type}_stats off + nsim_hwstats_disable $instance dummy1 $type + + log_test "Injected failure of $type stats enablement (netdevsim #$instance)" +} + +fail_next_test() +{ + __fail_next_test 1 "$@" + __fail_next_test 2 "$@" + __fail_next_test 3 "$@" +} + +l3_fail_next_test() +{ + fail_next_test l3 +} + +get_hwstat() +{ + local netdev=$1; shift + local type=$1; shift + local selector=$1; shift + + $IP -j stats show dev $netdev group offload subgroup ${type}_stats | + jq ".[0].stats64.${selector}" +} + +counter_test() +{ + local type=$1; shift + local instance=1 + + RET=0 + + nsim_hwstats_enable $instance dummy1 $type + $IP stats set dev dummy1 ${type}_stats on + netdev_check_used dummy1 $type + check_err $? "$type stats reported as not used after both device and netdevsim request" + + # Netdevsim counts 10pps on ingress. We should see maybe a couple + # packets, unless things take a reeealy long time. + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after first enablement" + + sleep 2.5 + + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts >= 20)) + check_err $? "$type stats show < 20 packets after 2.5s passed" + + $IP stats set dev dummy1 ${type}_stats off + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after second enablement" + + $IP stats set dev dummy1 ${type}_stats off + nsim_hwstats_fail_next_enable $instance dummy1 $type + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show >= 10 packets after post-fail enablement" + + $IP stats set dev dummy1 ${type}_stats off + + log_test "Counter values in $type stats" +} + +l3_counter_test() +{ + counter_test l3 +} + +rollback_test() +{ + local type=$1; shift + + RET=0 + + nsim_hwstats_enable 1 dummy1 l3 + nsim_hwstats_enable 2 dummy1 l3 + nsim_hwstats_enable 3 dummy1 l3 + + # The three netdevsim instances are registered in order of their number + # one after another. It is reasonable to expect that whatever + # notifications take place hit no. 2 in between hitting nos. 1 and 3, + # whatever the actual order. This allows us to test that a fail caused + # by no. 2 does not leave the system in a partial state, and rolls + # everything back. + + nsim_hwstats_fail_next_enable 2 dummy1 l3 + $IP stats set dev dummy1 ${type}_stats on 2>/dev/null + check_fail $? "$type stats request not bounced as it should have been" + + netdev_check_unused dummy1 $type + check_err $? "$type stats reported as used after bounce" + netdev_check_unrequested dummy1 $type + check_err $? "$type stats reported as requested after bounce" + + sleep 2 + + $IP stats set dev dummy1 ${type}_stats on + check_err $? "$type stats request not upheld as it should have been" + + local pkts=$(get_hwstat dummy1 l3 rx.packets) + ((pkts < 10)) + check_err $? "$type stats show $pkts packets after post-fail enablement" + + $IP stats set dev dummy1 ${type}_stats off + + nsim_hwstats_disable 3 dummy1 l3 + nsim_hwstats_disable 2 dummy1 l3 + nsim_hwstats_disable 1 dummy1 l3 + + log_test "Failure in $type stats enablement rolled back" +} + +l3_rollback_test() +{ + rollback_test l3 +} + +l3_monitor_test() +{ + hw_stats_monitor_test dummy1 l3 \ + "nsim_hwstats_enable 1 dummy1 l3" \ + "nsim_hwstats_disable 1 dummy1 l3" \ + "$IP" +} + +trap cleanup EXIT + +setup_prepare +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh new file mode 100755 index 000000000..e8e0dc088 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh @@ -0,0 +1,1058 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the nexthop offload API. It makes use of netdevsim +# which registers a listener to the nexthop notification chain. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + nexthop_single_add_test + nexthop_single_add_err_test + nexthop_group_add_test + nexthop_group_add_err_test + nexthop_res_group_add_test + nexthop_res_group_add_err_test + nexthop_group_replace_test + nexthop_group_replace_err_test + nexthop_res_group_replace_test + nexthop_res_group_replace_err_test + nexthop_res_group_idle_timer_test + nexthop_res_group_idle_timer_del_test + nexthop_res_group_increase_idle_timer_test + nexthop_res_group_decrease_idle_timer_test + nexthop_res_group_unbalanced_timer_test + nexthop_res_group_unbalanced_timer_del_test + nexthop_res_group_no_unbalanced_timer_test + nexthop_res_group_short_unbalanced_timer_test + nexthop_res_group_increase_unbalanced_timer_test + nexthop_res_group_decrease_unbalanced_timer_test + nexthop_res_group_force_migrate_busy_test + nexthop_single_replace_test + nexthop_single_replace_err_test + nexthop_single_in_group_replace_test + nexthop_single_in_group_replace_err_test + nexthop_single_in_res_group_replace_test + nexthop_single_in_res_group_replace_err_test + nexthop_single_in_group_delete_test + nexthop_single_in_group_delete_err_test + nexthop_single_in_res_group_delete_test + nexthop_single_in_res_group_delete_err_test + nexthop_replay_test + nexthop_replay_err_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_NET_DIR=/sys/kernel/debug/netdevsim/$DEV/ +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +nexthop_check() +{ + local nharg="$1"; shift + local expected="$1"; shift + + out=$($IP nexthop show ${nharg} | sed -e 's/ *$//') + if [[ "$out" != "$expected" ]]; then + return 1 + fi + + return 0 +} + +nexthop_bucket_nhid_count_check() +{ + local group_id=$1; shift + local expected + local count + local nhid + local ret + + while (($# > 0)); do + nhid=$1; shift + expected=$1; shift + + count=$($IP nexthop bucket show id $group_id nhid $nhid | + grep "trap" | wc -l) + if ((expected != count)); then + return 1 + fi + done + + return 0 +} + +nexthop_resource_check() +{ + local expected_occ=$1; shift + + occ=$($DEVLINK -jp resource show $DEVLINK_DEV \ + | jq '.[][][] | select(.name=="nexthops") | .["occ"]') + + if [ $expected_occ -ne $occ ]; then + return 1 + fi + + return 0 +} + +nexthop_resource_set() +{ + local size=$1; shift + + $DEVLINK resource set $DEVLINK_DEV path nexthops size $size + $DEVLINK dev reload $DEVLINK_DEV +} + +nexthop_single_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 1 + nexthop_resource_check 0 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Single nexthop add and delete" +} + +nexthop_single_add_err_test() +{ + RET=0 + + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop addition succeeded when should fail" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,20/2,39 + nexthop_check "id 10" "id 10 group 1,20/2,39 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_resource_check 61 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_res_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,3/2,2 type resilient buckets 5 + nexthop_check "id 10" "id 10 group 1,3/2,2 type resilient buckets 5 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 7 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Resilient nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 + nexthop_check "id 10" "id 10 group 1/2/3 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 10 group 1/2/3 &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Nexthop group replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + $IP nexthop replace id 10 group 1/2/3 type resilient + nexthop_check "id 10" "id 10 group 1/2/3 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace + $IP nexthop replace id 10 group 1/2/3 type resilient &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 3 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Resilient nexthop group replace failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace +} + +nexthop_res_mark_buckets_busy() +{ + local group_id=$1; shift + local nhid=$1; shift + local count=$1; shift + local index + + for index in $($IP -j nexthop bucket show id $group_id nhid $nhid | + jq '.[].bucket.index' | head -n ${count:--0}) + do + echo $group_id $index \ + > $DEBUGFS_NET_DIR/fib/nexthop_bucket_activity + done +} + +nexthop_res_num_nhid_buckets() +{ + local group_id=$1; shift + local nhid=$1; shift + + $IP -j nexthop bucket show id $group_id nhid $nhid | jq length +} + +nexthop_res_group_idle_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 idle_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to be unbalanced" + + sleep 6 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_idle_timer_del_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 \ + type resilient buckets 8 idle_timer 6 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 3 0 + check_err $? "Group expected to be unbalanced" + + sleep 4 + + # Deletion prompts group replacement. Check that the bucket timers + # are kept. + $IP nexthop delete id 3 + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to still be unbalanced" + + sleep 4 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_decrease_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 4 + sleep 4 + + # 6 seconds, past the new timer, before the old timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer decrease" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_del_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,100/2,100/3,1 \ + type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,100/2,300/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_idle_timer_test() +{ + __nexthop_res_group_increase_timer_test idle_timer +} + +nexthop_res_group_decrease_idle_timer_test() +{ + __nexthop_res_group_decrease_timer_test idle_timer +} + +nexthop_res_group_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in 1 2; do + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_unbalanced_timer_del_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + # Check that NH delete does not reset unbalanced time. + sleep 4 + $IP nexthop delete id 3 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "1: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "2: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_no_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in $(seq 3); do + sleep 60 + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + log_test "Buckets never force-migrated without unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_short_unbalanced_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 unbalanced_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 5 + + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced < idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_unbalanced_timer_test() +{ + __nexthop_res_group_increase_timer_test unbalanced_timer +} + +nexthop_res_group_decrease_unbalanced_timer_test() +{ + __nexthop_res_group_decrease_timer_test unbalanced_timer +} + +nexthop_res_group_force_migrate_busy_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + $IP nexthop replace id 10 group 2 type resilient + nexthop_bucket_nhid_count_check 10 2 8 + check_err $? "All buckets expected to have migrated" + + log_test "Busy buckets force-migrated when NH removed" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 + nexthop_check "id 1" "id 1 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_replace_err_test() +{ + RET=0 + + # This is supposed to cause the replace to fail because the new nexthop + # is programmed before deleting the replaced one. + nexthop_resource_set 1 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + + $IP nexthop replace id 1 via 192.0.2.3 dev dummy1 &> /dev/null + check_fail $? "Nexthop replace succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_resource_check 1 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Single nexthop replace failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_replace_err_test() +{ + RET=0 + + nexthop_resource_set 5 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + +nexthop_single_in_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_group_delete_err_test() +{ + RET=0 + + # First, nexthop 1 will be deleted, which will reduce the occupancy to + # 5. Afterwards, a replace notification will be sent for nexthop group + # 10 with only two nexthops. Since the new group is allocated before + # the old is deleted, the replacement will fail as it will result in an + # occupancy of 7. + nexthop_resource_set 6 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 + + $IP nexthop del id 1 + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in group failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + +nexthop_single_in_res_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 2 4 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_delete_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop del id 1 + + # We failed to replace the two nexthop buckets that were originally + # assigned to nhid 1. + nexthop_bucket_nhid_count_check 10 2 2 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 8 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + +nexthop_replay_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 2" "id 2 via 192.0.2.3 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after reload" + + nexthop_check "id 10" "id 10 group 1/2 trap" + check_err $? "Unexpected nexthop group entry after reload" + + nexthop_resource_check 4 + check_err $? "Wrong nexthop occupancy" + + log_test "Nexthop replay" + + $IP nexthop flush &> /dev/null +} + +nexthop_replay_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 + + # Reduce size of nexthop resource so that reload will fail. + $DEVLINK resource set $DEVLINK_DEV path nexthops size 3 + $DEVLINK dev reload $DEVLINK_DEV &> /dev/null + check_fail $? "Reload succeeded when should fail" + + $DEVLINK resource set $DEVLINK_DEV path nexthops size 9999 + $DEVLINK dev reload $DEVLINK_DEV + check_err $? "Failed to reload when should not" + + log_test "Nexthop replay failure" + + $IP nexthop flush &> /dev/null +} + +setup_prepare() +{ + local netdev + + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + IP="ip -netns testns1" + DEVLINK="devlink -N testns1" + + $IP link add name dummy1 up type dummy + $IP address add 192.0.2.1/24 dev dummy1 + + set +e +} + +cleanup() +{ + pre_cleanup + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/psample.sh b/tools/testing/selftests/drivers/net/netdevsim/psample.sh new file mode 100755 index 000000000..e689ff7a0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/psample.sh @@ -0,0 +1,183 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the psample module. It makes use of netdevsim +# which periodically generates "sampled" packets. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + psample_enable_test + psample_group_num_test + psample_md_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/ +CAPTURE_FILE=$(mktemp) +NUM_NETIFS=0 +source $lib_dir/lib.sh + +DEVLINK_DEV= +source $lib_dir/devlink_lib.sh +DEVLINK_DEV=netdevsim/${DEV} + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +psample_capture() +{ + rm -f $CAPTURE_FILE + + timeout 2 ip netns exec testns1 psample &> $CAPTURE_FILE +} + +psample_enable_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + check_err $? "Failed to enable sampling when should not" + + echo 1 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling enablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -eq 0 ]; then + check_err 1 "Failed to capture sampled packets" + fi + + echo 0 > $PSAMPLE_DIR/enable + check_err $? "Failed to disable sampling when should not" + + echo 0 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling disablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -ne 0 ]; then + check_err 1 "Captured sampled packets when should not" + fi + + log_test "psample enable / disable" +} + +psample_group_num_test() +{ + RET=0 + + echo 1234 > $PSAMPLE_DIR/group_num + echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong group number" + + # New group number should only be used after disable / enable. + echo 4321 > $PSAMPLE_DIR/group_num + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_fail $? "Group number changed while sampling is active" + + echo 0 > $PSAMPLE_DIR/enable && echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_err $? "Group number did not change after restarting sampling" + + log_test "psample group number" + + echo 0 > $PSAMPLE_DIR/enable +} + +psample_md_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + + echo 1234 > $PSAMPLE_DIR/in_ifindex + echo 4321 > $PSAMPLE_DIR/out_ifindex + psample_capture + + grep -q -e "in-ifindex 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong in-ifindex" + + grep -q -e "out-ifindex 4321" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-ifindex" + + echo 5 > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc 5" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-tc" + + echo $((2**16 - 1)) > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc when should not" + + echo 1 > $PSAMPLE_DIR/out_tc + echo 10000 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_err $? "Sampled packets not reported with out-tc-occ when should" + + echo 0 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc-occ when should not" + + echo 10000 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets not reported with latency when should" + + echo 0 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_fail $? "Sampled packets reported with latency when should not" + + log_test "psample metadata" + + echo 0 > $PSAMPLE_DIR/enable +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + set +e +} + +cleanup() +{ + pre_cleanup + rm -f $CAPTURE_FILE + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh new file mode 100755 index 000000000..fd13c8cfb --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh @@ -0,0 +1,77 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +set -o pipefail + +n_children() { + n=$(tc qdisc show dev $NDEV | grep '^qdisc' | wc -l) + echo $((n - 1)) +} + +tcq() { + tc qdisc $1 dev $NDEV ${@:2} +} + +n_child_assert() { + n=$(n_children) + if [ $n -ne $1 ]; then + echo "ERROR ($root): ${@:2}, expected $1 have $n" + ((num_errors++)) + else + ((num_passes++)) + fi +} + + +for root in mq mqprio; do + NDEV=$(make_netdev 1 4) + + opts= + [ $root == "mqprio" ] && opts='hw 0 num_tc 1 map 0 0 0 0 queues 1@0' + + tcq add root handle 100: $root $opts + n_child_assert 4 'Init' + + # All defaults + + for n in 3 2 1 2 3 4 1 4; do + ethtool -L $NDEV combined $n + n_child_assert $n "Change queues to $n while down" + done + + ip link set dev $NDEV up + + for n in 3 2 1 2 3 4 1 4; do + ethtool -L $NDEV combined $n + n_child_assert $n "Change queues to $n while up" + done + + # One real one + tcq replace parent 100:4 handle 204: pfifo_fast + n_child_assert 4 "One real queue" + + ethtool -L $NDEV combined 1 + n_child_assert 2 "One real queue, one default" + + ethtool -L $NDEV combined 4 + n_child_assert 4 "One real queue, rest default" + + # Graft some + tcq replace parent 100:1 handle 204: + n_child_assert 3 "Grafted" + + ethtool -L $NDEV combined 1 + n_child_assert 1 "Grafted, one" + + cleanup_nsim +done + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh new file mode 100755 index 000000000..185b02d2d --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh @@ -0,0 +1,962 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +VNI_GEN=$RANDOM +NSIM_ID=$((RANDOM % 1024)) +NSIM_DEV_SYS=/sys/bus/netdevsim/devices/netdevsim$NSIM_ID +NSIM_DEV_DFS=/sys/kernel/debug/netdevsim/netdevsim$NSIM_ID +NSIM_NETDEV= +HAS_ETHTOOL= +STATIC_ENTRIES= +EXIT_STATUS=0 +num_cases=0 +num_errors=0 + +clean_up_devs=( ) + +function err_cnt { + echo "ERROR:" $@ + EXIT_STATUS=1 + ((num_errors++)) + ((num_cases++)) +} + +function pass_cnt { + ((num_cases++)) +} + +function cleanup_tuns { + for dev in "${clean_up_devs[@]}"; do + [ -e /sys/class/net/$dev ] && ip link del dev $dev + done + clean_up_devs=( ) +} + +function cleanup_nsim { + if [ -e $NSIM_DEV_SYS ]; then + echo $NSIM_ID > /sys/bus/netdevsim/del_device + fi +} + +function cleanup { + cleanup_tuns + cleanup_nsim +} + +trap cleanup EXIT + +function new_vxlan { + local dev=$1 + local dstport=$2 + local lower=$3 + local ipver=$4 + local flags=$5 + + local group ipfl + + [ "$ipver" != '6' ] && group=239.1.1.1 || group=fff1::1 + [ "$ipver" != '6' ] || ipfl="-6" + + [[ ! "$flags" =~ "external" ]] && flags="$flags id $((VNI_GEN++))" + + ip $ipfl link add $dev type vxlan \ + group $group \ + dev $lower \ + dstport $dstport \ + $flags + + ip link set dev $dev up + + clean_up_devs=("${clean_up_devs[@]}" $dev) + + check_tables +} + +function new_geneve { + local dev=$1 + local dstport=$2 + local ipver=$3 + local flags=$4 + + local group ipfl + + [ "$ipver" != '6' ] && remote=1.1.1.2 || group=::2 + [ "$ipver" != '6' ] || ipfl="-6" + + [[ ! "$flags" =~ "external" ]] && flags="$flags vni $((VNI_GEN++))" + + ip $ipfl link add $dev type geneve \ + remote $remote \ + dstport $dstport \ + $flags + + ip link set dev $dev up + + clean_up_devs=("${clean_up_devs[@]}" $dev) + + check_tables +} + +function del_dev { + local dev=$1 + + ip link del dev $dev + check_tables +} + +# Helpers for netdevsim port/type encoding +function mke { + local port=$1 + local type=$2 + + echo $((port << 16 | type)) +} + +function pre { + local val=$1 + + echo -e "port: $((val >> 16))\ttype: $((val & 0xffff))" +} + +function pre_ethtool { + local val=$1 + local port=$((val >> 16)) + local type=$((val & 0xffff)) + + case $type in + 1) + type_name="vxlan" + ;; + 2) + type_name="geneve" + ;; + 4) + type_name="vxlan-gpe" + ;; + *) + type_name="bit X" + ;; + esac + + echo "port $port, $type_name" +} + +function check_table { + local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + local -n expected=$2 + local last=$3 + + read -a have < $path + + if [ ${#expected[@]} -ne ${#have[@]} ]; then + echo "check_table: BAD NUMBER OF ITEMS" + return 0 + fi + + for i in "${!expected[@]}"; do + if [ -n "$HAS_ETHTOOL" -a ${expected[i]} -ne 0 ]; then + pp_expected=`pre_ethtool ${expected[i]}` + ethtool --show-tunnels $NSIM_NETDEV | grep "$pp_expected" >/dev/null + if [ $? -ne 0 -a $last -ne 0 ]; then + err_cnt "ethtool table $1 on port $port: $pfx - $msg" + echo " check_table: ethtool does not contain '$pp_expected'" + ethtool --show-tunnels $NSIM_NETDEV + return 0 + + fi + fi + + if [ ${expected[i]} != ${have[i]} ]; then + if [ $last -ne 0 ]; then + err_cnt "table $1 on port $port: $pfx - $msg" + echo " check_table: wrong entry $i" + echo " expected: `pre ${expected[i]}`" + echo " have: `pre ${have[i]}`" + return 0 + fi + return 1 + fi + done + + pass_cnt + return 0 +} + +function check_tables { + # Need retries in case we have workqueue making the changes + local retries=10 + + while ! check_table 0 exp0 $((retries == 0)); do + sleep 0.02 + ((retries--)) + done + while ! check_table 1 exp1 $((retries == 0)); do + sleep 0.02 + ((retries--)) + done + + if [ -n "$HAS_ETHTOOL" -a -n "${STATIC_ENTRIES[0]}" ]; then + fail=0 + for i in "${!STATIC_ENTRIES[@]}"; do + pp_expected=`pre_ethtool ${STATIC_ENTRIES[i]}` + cnt=$(ethtool --show-tunnels $NSIM_NETDEV | grep -c "$pp_expected") + if [ $cnt -ne 1 ]; then + err_cnt "ethtool static entry: $pfx - $msg" + echo " check_table: ethtool does not contain '$pp_expected'" + ethtool --show-tunnels $NSIM_NETDEV + fail=1 + fi + done + [ $fail == 0 ] && pass_cnt + fi +} + +function print_table { + local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1 + read -a have < $path + + tree $NSIM_DEV_DFS/ + + echo "Port $port table $1:" + + for i in "${!have[@]}"; do + echo " `pre ${have[i]}`" + done + +} + +function print_tables { + print_table 0 + print_table 1 +} + +function get_netdev_name { + local -n old=$1 + + new=$(ls /sys/class/net) + + for netdev in $new; do + for check in $old; do + [ $netdev == $check ] && break + done + + if [ $netdev != $check ]; then + echo $netdev + break + fi + done +} + +### +### Code start +### + +# Probe ethtool support +ethtool -h | grep show-tunnels 2>&1 >/dev/null && HAS_ETHTOOL=y + +modprobe netdevsim + +# Basic test +pfx="basic" + +for port in 0 1; do + old_netdevs=$(ls /sys/class/net) + if [ $port -eq 0 ]; then + echo $NSIM_ID > /sys/bus/netdevsim/new_device + else + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + echo 1 > $NSIM_DEV_SYS/new_port + fi + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="new NIC device created" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + check_tables + + msg="VxLAN v4 devices" + exp0=( `mke 4789 1` 0 0 0 ) + new_vxlan vxlan0 4789 $NSIM_NETDEV + new_vxlan vxlan1 4789 $NSIM_NETDEV + + msg="VxLAN v4 devices go down" + exp0=( 0 0 0 0 ) + ifconfig vxlan1 down + ifconfig vxlan0 down + check_tables + + msg="VxLAN v6 devices" + exp0=( `mke 4789 1` 0 0 0 ) + new_vxlan vxlanA 4789 $NSIM_NETDEV 6 + + for ifc in vxlan0 vxlan1; do + ifconfig $ifc up + done + + new_vxlan vxlanB 4789 $NSIM_NETDEV 6 + + msg="another VxLAN v6 devices" + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + new_vxlan vxlanC 4790 $NSIM_NETDEV 6 + + msg="Geneve device" + exp1=( `mke 6081 2` 0 0 0 ) + new_geneve gnv0 6081 + + msg="NIC device goes down" + ifconfig $NSIM_NETDEV down + if [ $port -eq 1 ]; then + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + fi + check_tables + msg="NIC device goes up again" + ifconfig $NSIM_NETDEV up + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + exp1=( `mke 6081 2` 0 0 0 ) + check_tables + + cleanup_tuns + + msg="tunnels destroyed" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + check_tables + + modprobe -r geneve + modprobe -r vxlan + modprobe -r udp_tunnel + + check_tables +done + +modprobe -r netdevsim + +# Module tests +pfx="module tests" + +if modinfo netdevsim | grep udp_tunnel >/dev/null; then + err_cnt "netdevsim depends on udp_tunnel" +else + pass_cnt +fi + +modprobe netdevsim + +old_netdevs=$(ls /sys/class/net) +port=0 +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port +echo 1000 > $NSIM_DEV_DFS/udp_ports_sleep +echo 0 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` + +msg="create VxLANs" +exp0=( 0 0 0 0 ) # sleep is longer than out wait +new_vxlan vxlan0 10000 $NSIM_NETDEV + +modprobe -r vxlan +modprobe -r udp_tunnel + +msg="remove tunnels" +exp0=( 0 0 0 0 ) +check_tables + +msg="create VxLANs" +exp0=( 0 0 0 0 ) # sleep is longer than out wait +new_vxlan vxlan0 10000 $NSIM_NETDEV + +exp0=( 0 0 0 0 ) + +modprobe -r netdevsim +modprobe netdevsim + +# Overflow the table + +function overflow_table0 { + local pfx=$1 + + msg="create VxLANs 1/5" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="create VxLANs 2/5" + exp0=( `mke 10000 1` `mke 10001 1` 0 0 ) + new_vxlan vxlan1 10001 $NSIM_NETDEV + + msg="create VxLANs 3/5" + exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` 0 ) + new_vxlan vxlan2 10002 $NSIM_NETDEV + + msg="create VxLANs 4/5" + exp0=( `mke 10000 1` `mke 10001 1` `mke 10002 1` `mke 10003 1` ) + new_vxlan vxlan3 10003 $NSIM_NETDEV + + msg="create VxLANs 5/5" + new_vxlan vxlan4 10004 $NSIM_NETDEV +} + +function overflow_table1 { + local pfx=$1 + + msg="create GENEVE 1/5" + exp1=( `mke 20000 2` 0 0 0 ) + new_geneve gnv0 20000 + + msg="create GENEVE 2/5" + exp1=( `mke 20000 2` `mke 20001 2` 0 0 ) + new_geneve gnv1 20001 + + msg="create GENEVE 3/5" + exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` 0 ) + new_geneve gnv2 20002 + + msg="create GENEVE 4/5" + exp1=( `mke 20000 2` `mke 20001 2` `mke 20002 2` `mke 20003 2` ) + new_geneve gnv3 20003 + + msg="create GENEVE 5/5" + new_geneve gnv4 20004 +} + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + overflow_table0 "overflow NIC table" + overflow_table1 "overflow NIC table" + + msg="replace VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) + del_dev vxlan1 + + msg="vacate VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) + del_dev vxlan2 + + msg="replace GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` ) + del_dev gnv1 + + msg="vacate GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` ) + del_dev gnv2 + + msg="table sharing - share" + exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` ) + new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external" + + msg="table sharing - overflow" + new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external" + msg="table sharing - overflow v6" + new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external" + + exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` ) + del_dev gnv4 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# Sync all +pfx="sync all" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port +echo 1 > $NSIM_DEV_DFS/udp_ports_sync_all + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + overflow_table0 "overflow NIC table" + overflow_table1 "overflow NIC table" + + msg="replace VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) + del_dev vxlan1 + + msg="vacate VxLAN in overflow table" + exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) + del_dev vxlan2 + + msg="replace GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` `mke 20002 2` `mke 20003 2` ) + del_dev gnv1 + + msg="vacate GENEVE in overflow table" + exp1=( `mke 20000 2` `mke 20004 2` 0 `mke 20003 2` ) + del_dev gnv2 + + msg="table sharing - share" + exp1=( `mke 20000 2` `mke 20004 2` `mke 30001 4` `mke 20003 2` ) + new_vxlan vxlanG0 30001 $NSIM_NETDEV 4 "gpe external" + + msg="table sharing - overflow" + new_vxlan vxlanG1 30002 $NSIM_NETDEV 4 "gpe external" + msg="table sharing - overflow v6" + new_vxlan vxlanG2 30002 $NSIM_NETDEV 6 "gpe external" + + exp1=( `mke 20000 2` `mke 30002 4` `mke 30001 4` `mke 20003 2` ) + del_dev gnv4 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# Destroy full NIC +pfx="destroy full" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + overflow_table0 "destroy NIC" + overflow_table1 "destroy NIC" + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# IPv4 only +pfx="IPv4 only" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port +echo 1 > $NSIM_DEV_DFS/udp_ports_ipv4_only + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="create VxLANs v6" + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="create VxLANs v6" + new_vxlan vxlanA1 10000 $NSIM_NETDEV 6 + + ip link set dev vxlanA0 down + ip link set dev vxlanA0 up + check_tables + + msg="create VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="down VxLANs v4" + exp0=( 0 0 0 0 ) + ip link set dev vxlan0 down + check_tables + + msg="up VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + ip link set dev vxlan0 up + check_tables + + msg="destroy VxLANs v4" + exp0=( 0 0 0 0 ) + del_dev vxlan0 + + msg="recreate VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + del_dev vxlanA0 + del_dev vxlanA1 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# Failures +pfx="error injection" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + + msg="1 - create VxLANs v6" + exp0=( 0 0 0 0 ) + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="1 - create VxLANs v4" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="1 - remove VxLANs v4" + del_dev vxlan0 + + msg="1 - remove VxLANs v6" + exp0=( 0 0 0 0 ) + del_dev vxlanA0 + + msg="2 - create GENEVE" + exp1=( `mke 20000 2` 0 0 0 ) + new_geneve gnv0 20000 + + msg="2 - destroy GENEVE" + echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error + exp1=( `mke 20000 2` 0 0 0 ) + del_dev gnv0 + + msg="2 - create second GENEVE" + exp1=( 0 `mke 20001 2` 0 0 ) + new_geneve gnv0 20001 + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# netdev flags +pfx="netdev flags" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="create VxLANs v6" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="create VxLANs v4" + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="turn off" + exp0=( 0 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + check_tables + + msg="turn on" + exp0=( `mke 10000 1` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="remove both" + del_dev vxlanA0 + exp0=( 0 0 0 0 ) + del_dev vxlan0 + check_tables + + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + + msg="create VxLANs v4 - off" + exp0=( 0 0 0 0 ) + new_vxlan vxlan0 10000 $NSIM_NETDEV + + msg="created off - turn on" + exp0=( `mke 10000 1` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# device initiated reset +pfx="reset notification" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +for port in 0 1; do + if [ $port -ne 0 ]; then + echo 1 > $NSIM_DEV_DFS/udp_ports_open_only + echo 1 > $NSIM_DEV_DFS/udp_ports_sleep + fi + + echo $port > $NSIM_DEV_SYS/new_port + NSIM_NETDEV=`get_netdev_name old_netdevs` + ifconfig $NSIM_NETDEV up + + msg="create VxLANs v6" + exp0=( `mke 10000 1` 0 0 0 ) + new_vxlan vxlanA0 10000 $NSIM_NETDEV 6 + + msg="create VxLANs v4" + new_vxlan vxlan0 10000 $NSIM_NETDEV + + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + check_tables + + msg="NIC device goes down" + ifconfig $NSIM_NETDEV down + if [ $port -eq 1 ]; then + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + fi + check_tables + + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + check_tables + + msg="NIC device goes up again" + ifconfig $NSIM_NETDEV up + exp0=( `mke 10000 1` 0 0 0 ) + check_tables + + msg="remove both" + del_dev vxlanA0 + exp0=( 0 0 0 0 ) + del_dev vxlan0 + check_tables + + echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset + check_tables + + msg="destroy NIC" + echo $port > $NSIM_DEV_SYS/del_port + + cleanup_tuns + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) +done + +cleanup_nsim + +# shared port tables +pfx="table sharing" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +echo 0 > $NSIM_DEV_DFS/udp_ports_open_only +echo 1 > $NSIM_DEV_DFS/udp_ports_sleep +echo 1 > $NSIM_DEV_DFS/udp_ports_shared + +old_netdevs=$(ls /sys/class/net) +echo 1 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` +old_netdevs=$(ls /sys/class/net) +echo 2 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV2=`get_netdev_name old_netdevs` + +msg="VxLAN v4 devices" +exp0=( `mke 4789 1` 0 0 0 ) +exp1=( 0 0 0 0 ) +new_vxlan vxlan0 4789 $NSIM_NETDEV +new_vxlan vxlan1 4789 $NSIM_NETDEV2 + +msg="VxLAN v4 devices go down" +exp0=( 0 0 0 0 ) +ifconfig vxlan1 down +ifconfig vxlan0 down +check_tables + +for ifc in vxlan0 vxlan1; do + ifconfig $ifc up +done + +msg="VxLAN v6 device" +exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) +new_vxlan vxlanC 4790 $NSIM_NETDEV 6 + +msg="Geneve device" +exp1=( `mke 6081 2` 0 0 0 ) +new_geneve gnv0 6081 + +msg="NIC device goes down" +ifconfig $NSIM_NETDEV down +check_tables + +msg="NIC device goes up again" +ifconfig $NSIM_NETDEV up +check_tables + +for i in `seq 2`; do + msg="turn feature off - 1, rep $i" + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload off + check_tables + + msg="turn feature off - 2, rep $i" + exp0=( 0 0 0 0 ) + exp1=( 0 0 0 0 ) + ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload off + check_tables + + msg="turn feature on - 1, rep $i" + exp0=( `mke 4789 1` `mke 4790 1` 0 0 ) + exp1=( `mke 6081 2` 0 0 0 ) + ethtool -K $NSIM_NETDEV rx-udp_tunnel-port-offload on + check_tables + + msg="turn feature on - 2, rep $i" + ethtool -K $NSIM_NETDEV2 rx-udp_tunnel-port-offload on + check_tables +done + +msg="tunnels destroyed 1" +cleanup_tuns +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +overflow_table0 "overflow NIC table" + +msg="re-add a port" + +echo 2 > $NSIM_DEV_SYS/del_port +echo 2 > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` +check_tables + +msg="replace VxLAN in overflow table" +exp0=( `mke 10000 1` `mke 10004 1` `mke 10002 1` `mke 10003 1` ) +del_dev vxlan1 + +msg="vacate VxLAN in overflow table" +exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` ) +del_dev vxlan2 + +echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset +check_tables + +msg="tunnels destroyed 2" +cleanup_tuns +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +echo 1 > $NSIM_DEV_SYS/del_port +echo 2 > $NSIM_DEV_SYS/del_port + +cleanup_nsim + +# Static IANA port +pfx="static IANA vxlan" + +echo $NSIM_ID > /sys/bus/netdevsim/new_device +echo 0 > $NSIM_DEV_SYS/del_port + +echo 1 > $NSIM_DEV_DFS/udp_ports_static_iana_vxlan +STATIC_ENTRIES=( `mke 4789 1` ) + +port=1 +old_netdevs=$(ls /sys/class/net) +echo $port > $NSIM_DEV_SYS/new_port +NSIM_NETDEV=`get_netdev_name old_netdevs` + +msg="check empty" +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +msg="add on static port" +new_vxlan vxlan0 4789 $NSIM_NETDEV +new_vxlan vxlan1 4789 $NSIM_NETDEV + +msg="add on different port" +exp0=( `mke 4790 1` 0 0 0 ) +new_vxlan vxlan2 4790 $NSIM_NETDEV + +cleanup_tuns + +msg="tunnels destroyed" +exp0=( 0 0 0 0 ) +exp1=( 0 0 0 0 ) +check_tables + +msg="different type" +new_geneve gnv0 4789 + +cleanup_tuns +cleanup_nsim + +# END + +modprobe -r netdevsim + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $num_cases checks" +else + echo "FAILED $num_errors/$num_cases checks" +fi + +exit $EXIT_STATUS |