1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019 Analogix Semiconductor, Inc.
%YAML 1.2
---
$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
maintainers:
- Xin Ji <xji@analogixsemi.com>
description: |
The ANX7625 is an ultra-low power 4K Mobile HD Transmitter
designed for portable devices.
properties:
compatible:
items:
- const: analogix,anx7625
reg:
maxItems: 1
interrupts:
description: used for interrupt pin B8.
maxItems: 1
enable-gpios:
description: used for power on chip control, POWER_EN pin D2.
maxItems: 1
reset-gpios:
description: used for reset chip control, RESET_N pin B7.
maxItems: 1
vdd10-supply:
description: Regulator that provides the supply 1.0V power.
vdd18-supply:
description: Regulator that provides the supply 1.8V power.
vdd33-supply:
description: Regulator that provides the supply 3.3V power.
analogix,lane0-swing:
$ref: /schemas/types.yaml#/definitions/uint8-array
minItems: 1
maxItems: 20
description:
an array of swing register setting for DP tx lane0 PHY.
Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
[Swing control] setting.
Registers 0~9, bit 3:0 is [Boost control], these bits control
post cursor manual, increase the [Boost control] to increase
Pre-emphasis value.
Registers 0~9, bit 6:4 is [Swing control], these bits control
swing manual, increase [Swing control] setting to add Vp-p value
for each Swing, Pre.
Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
[R Termination control] setting.
Registers 10~19, bit 4:0 is [R select control], these bits are
compensation manual, increase it can enhance IO driven strength
and Vp-p.
Registers 10~19, bit 5:6 is [R termination control], these bits
adjust 50ohm impedance of DP tx termination. 00:55 ohm,
01:50 ohm(default), 10:45 ohm, 11:40 ohm.
analogix,lane1-swing:
$ref: /schemas/types.yaml#/definitions/uint8-array
minItems: 1
maxItems: 20
description:
an array of swing register setting for DP tx lane1 PHY.
DP TX lane1 swing register setting same with lane0
swing, please refer lane0-swing property description.
analogix,audio-enable:
type: boolean
description: let the driver enable audio HDMI codec function or not.
aux-bus:
$ref: /schemas/display/dp-aux-bus.yaml#
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
MIPI DSI/DPI input.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
type: object
additionalProperties: false
properties:
remote-endpoint: true
bus-type:
enum: [7]
default: 1
data-lanes: true
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for panel or connector.
required:
- port@0
- port@1
required:
- compatible
- reg
- vdd10-supply
- vdd18-supply
- vdd33-supply
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
encoder@58 {
compatible = "analogix,anx7625";
reg = <0x58>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
vdd10-supply = <&pp1000_mipibrdg>;
vdd18-supply = <&pp1800_mipibrdg>;
vdd33-supply = <&pp3300_mipibrdg>;
analogix,audio-enable;
analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
ports {
#address-cells = <1>;
#size-cells = <0>;
mipi2dp_bridge_in: port@0 {
reg = <0>;
anx7625_in: endpoint {
remote-endpoint = <&mipi_dsi>;
bus-type = <7>;
data-lanes = <0 1 2 3>;
};
};
mipi2dp_bridge_out: port@1 {
reg = <1>;
anx7625_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
aux-bus {
panel {
compatible = "innolux,n125hce-gn1";
power-supply = <&pp3300_disp_x>;
backlight = <&backlight_lcd0>;
port {
panel_in: endpoint {
remote-endpoint = <&anx7625_out>;
};
};
};
};
};
};
|
