1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Binding for Qualcomm Technologies, Inc. WLED driver
maintainers:
- Bjorn Andersson <bjorn.andersson@linaro.org>
- Kiran Gunda <kgunda@codeaurora.org>
description: |
WLED (White Light Emitting Diode) driver is used for controlling display
backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
platforms. The PMIC is connected to the host processor via SPMI bus.
properties:
compatible:
enum:
- qcom,pm8941-wled
- qcom,pmi8994-wled
- qcom,pmi8998-wled
- qcom,pm660l-wled
- qcom,pm6150l-wled
- qcom,pm8150l-wled
reg:
minItems: 1
maxItems: 2
default-brightness:
description: |
brightness value on boot.
label: true
max-brightness:
description: |
Maximum brightness level.
qcom,cs-out:
description: |
enable current sink output.
This property is supported only for WLED3.
type: boolean
qcom,cabc:
description: |
enable content adaptive backlight control.
type: boolean
qcom,ext-gen:
description: |
use externally generated modulator signal to dim.
This property is supported only for WLED3.
type: boolean
qcom,current-limit:
description: |
mA; per-string current limit.
This property is supported only for WLED3.
$ref: /schemas/types.yaml#/definitions/uint32
default: 20
minimum: 0
maximum: 25
qcom,current-limit-microamp:
description: |
uA; per-string current limit.
default: 25
minimum: 0
maximum: 30000
multipleOf: 25
qcom,current-boost-limit:
description: |
mA; boost current limit.
$ref: /schemas/types.yaml#/definitions/uint32
qcom,switching-freq:
description: |
kHz; switching frequency.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
2400, 3200, 4800, 9600 ]
qcom,ovp:
description: |
V; Over-voltage protection limit.
This property is supported only for WLED3.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 27, 29, 32, 35 ]
default: 29
qcom,ovp-millivolt:
description: |
Over-voltage protection limit. This property is for WLED4 only.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 18100, 19600, 29600, 31100 ]
default: 29600
qcom,num-strings:
description: |
number of led strings attached.
$ref: /schemas/types.yaml#/definitions/uint32
qcom,enabled-strings:
description: |
Array of the WLED strings numbered from 0 to 3. Each
string of leds are operated individually. Specify the
list of strings used by the device. Any combination of
led strings can be used.
$ref: /schemas/types.yaml#/definitions/uint32-array
minItems: 1
maxItems: 4
qcom,external-pfet:
description: |
Specify if external PFET control for short circuit
protection is used. This property is supported only
for WLED4.
type: boolean
qcom,auto-string-detection:
description: |
Enables auto-detection of the WLED string configuration.
This feature is not supported for WLED3.
type: boolean
interrupts:
minItems: 1
items:
- description: over voltage protection interrupt.
- description: short circuit interrupt.
interrupt-names:
minItems: 1
items:
- const: ovp
- const: short
qcom,modulator-sel:
description: |
Selects the modulator used for brightness modulation.
Allowed values are,
0 - Modulator A
1 - Modulator B
This property is applicable only to WLED5 peripheral.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1 ]
default: 0
qcom,cabc-sel:
description: |
Selects the CABC pin signal used for brightness modulation.
Allowed values are,
0 - CABC disabled
1 - CABC 1
2 - CABC 2
3 - External signal (e.g. LPG) is used for dimming
This property is applicable only to WLED5 peripheral.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 0, 1, 2, 3 ]
allOf:
- if:
properties:
compatible:
contains:
const: qcom,pm8941-wled
then:
properties:
reg:
maxItems: 1
qcom,current-boost-limit:
enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
default: 805
qcom,switching-freq:
default: 1600
qcom,num-strings:
enum: [ 1, 2, 3 ]
interrupts:
maxItems: 1
interrupt-names:
maxItems: 1
else:
properties:
reg:
minItems: 2
qcom,current-boost-limit:
enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
default: 970
qcom,switching-freq:
default: 800
qcom,num-strings:
enum: [ 1, 2, 3, 4 ]
interrupts:
minItems: 2
interrupt-names:
minItems: 2
- if:
properties:
compatible:
contains:
enum:
- qcom,pm8150l-wled
then:
properties:
default-brightness:
minimum: 0
maximum: 32767
max-brightness:
minimum: 0
maximum: 32767
else:
properties:
default-brightness:
minimum: 0
maximum: 4095
max-brightness:
minimum: 0
maximum: 4095
required:
- compatible
- reg
- label
additionalProperties: false
examples:
- |
backlight@d800 {
compatible = "qcom,pm8941-wled";
reg = <0xd800 0x100>;
label = "backlight";
qcom,cs-out;
qcom,current-limit = <20>;
qcom,current-boost-limit = <805>;
qcom,switching-freq = <1600>;
qcom,ovp = <29>;
qcom,num-strings = <2>;
qcom,enabled-strings = <0 1>;
};
|
