summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/adi,max98396.yaml
blob: fd5aa61b467f813ed28775d3ebffe4cf3b6c7809 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/adi,max98396.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices MAX98396 Speaker Amplifier

maintainers:
  - Ryan Lee <ryans.lee@analog.com>

description:
  The MAX98396 is a mono Class-DG speaker amplifier with I/V sense.
  The device provides a PCM interface for audio data and a standard
  I2C interface for control data communication.
  The MAX98397 is a variant of MAX98396 with wide input supply range.

properties:
  compatible:
    enum:
      - adi,max98396
      - adi,max98397
  reg:
    maxItems: 1
    description: I2C address of the device.

  avdd-supply:
    description: A 1.8V supply that powers up the AVDD pin.

  dvdd-supply:
    description: A 1.2V supply that powers up the DVDD pin.

  dvddio-supply:
    description: A 1.2V or 1.8V supply that powers up the VDDIO pin.

  pvdd-supply:
    description: A 3.0V to 20V supply that powers up the PVDD pin.

  vbat-supply:
    description: A 3.3V to 5.5V supply that powers up the VBAT pin.

  adi,vmon-slot-no:
    description: slot number of the voltage sense monitor
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 15
    default: 0

  adi,imon-slot-no:
    description: slot number of the current sense monitor
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 15
    default: 1

  adi,spkfb-slot-no:
    description: slot number of speaker DSP monitor
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 15
    default: 2

  adi,bypass-slot-no:
    description:
      Selects the PCM data input channel that is routed to the speaker
      audio processing bypass path.
    $ref: "/schemas/types.yaml#/definitions/uint32"
    minimum: 0
    maximum: 15
    default: 0

  adi,interleave-mode:
    description:
      For cases where a single combined channel for the I/V sense data
      is not sufficient, the device can also be configured to share
      a single data output channel on alternating frames.
      In this configuration, the current and voltage data will be frame
      interleaved on a single output channel.
    type: boolean

  adi,dmon-stuck-enable:
    description:
      Enables the "data monitor stuck" feature. Once the data monitor is
      enabled, it actively monitors the selected input data (from DIN) to the
      speaker amplifier. Once a data error is detected, the data monitor
      automatically places the device into software shutdown.
    type: boolean

  adi,dmon-stuck-threshold-bits:
    description:
      Sets the threshold for the "data monitor stuck" feature, in bits.
    enum: [9, 11, 13, 15]
    default: 15

  adi,dmon-magnitude-enable:
    description:
      Enables the "data monitor magnitude" feature. Once the data monitor is
      enabled, it actively monitors the selected input data (from DIN) to the
      speaker amplifier. Once a data error is detected, the data monitor
      automatically places the device into software shutdown.
    type: boolean

  adi,dmon-magnitude-threshold-bits:
    description:
      Sets the threshold for the "data monitor magnitude" feature, in bits.
    enum: [2, 3, 4, 5]
    default: 5

  adi,dmon-duration-ms:
    description:
      Sets the duration for the "data monitor" feature, in milliseconds.
    enum: [64, 256, 1024, 4096]
    default: 64

  reset-gpios:
    maxItems: 1

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
        max98396: amplifier@39 {
            compatible = "adi,max98396";
            reg = <0x39>;
            dvdd-supply = <&regulator_1v2>;
            dvddio-supply = <&regulator_1v8>;
            avdd-supply = <&regulator_1v8>;
            pvdd-supply = <&regulator_pvdd>;
            adi,vmon-slot-no = <0>;
            adi,imon-slot-no = <1>;
            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
        };
    };