summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
blob: 80750b0f458a82b48856920c99eb43487be73fa3 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/usb/mediatek,mtu3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek USB3 DRD Controller

maintainers:
  - Chunfeng Yun <chunfeng.yun@mediatek.com>

allOf:
  - $ref: "usb-drd.yaml"

description: |
  The DRD controller has a glue layer IPPC (IP Port Control), and its host is
  based on xHCI.

properties:
  compatible:
    items:
      - enum:
          - mediatek,mt2712-mtu3
          - mediatek,mt8173-mtu3
          - mediatek,mt8183-mtu3
          - mediatek,mt8188-mtu3
          - mediatek,mt8192-mtu3
          - mediatek,mt8195-mtu3
      - const: mediatek,mtu3

  reg:
    items:
      - description: the registers of device MAC
      - description: the registers of IP Port Control

  reg-names:
    items:
      - const: mac
      - const: ippc

  interrupts:
    description:
      use "interrupts-extended" when the interrupts are connected to the
      separate interrupt controllers
    minItems: 1
    items:
      - description: SSUSB device controller interrupt
      - description: optional, wakeup interrupt used to support runtime PM

  interrupt-names:
    items:
      - const: device
      - const: wakeup

  power-domains:
    description: A phandle to USB power domain node to control USB's MTCMOS
    maxItems: 1

  clocks:
    minItems: 1
    items:
      - description: Controller clock used by normal mode
      - description: Reference clock used by low power mode etc
      - description: Mcu bus clock for register access
      - description: DMA bus clock for data transfer

  clock-names:
    minItems: 1
    items:
      - const: sys_ck  # required, others are optional
      - const: ref_ck
      - const: mcu_ck
      - const: dma_ck

  phys:
    description:
      List of all the USB PHYs used, it's better to keep the sequence
      as the hardware layout.
    minItems: 1
    items:
      - description: USB2/HS PHY    # required, others are optional
      - description: USB3/SS(P) PHY
      - description: USB2/HS PHY    # the following for backward compatible
      - description: USB3/SS(P) PHY
      - description: USB2/HS PHY
      - description: USB3/SS(P) PHY
      - description: USB2/HS PHY
      - description: USB3/SS(P) PHY
      - description: USB2/HS PHY

  vusb33-supply:
    description: Regulator of USB AVDD3.3v

  vbus-supply:
    deprecated: true
    description: |
      Regulator of USB VBUS5v, needed when supports dual-role mode.
      Particularly, if use an output GPIO to control a VBUS regulator, should
      model it as a regulator. See bindings/regulator/fixed-regulator.yaml
      It's considered valid for compatibility reasons, not allowed for
      new bindings, and put into a usb-connector node.

  dr_mode:
    enum: [host, peripheral, otg]
    default: otg

  maximum-speed:
    enum: [super-speed-plus, super-speed, high-speed, full-speed]

  resets:
    maxItems: 1

  "#address-cells":
    enum: [1, 2]

  "#size-cells":
    enum: [1, 2]

  ranges: true

  extcon:
    deprecated: true
    description: |
      Phandle to the extcon device detecting the IDDIG state, needed
      when supports dual-role mode.
      It's considered valid for compatibility reasons, not allowed for
      new bindings, and use "usb-role-switch" property instead.

  usb-role-switch:
    $ref: /schemas/types.yaml#/definitions/flag
    description: Support role switch.
    type: boolean

  role-switch-default-mode:
    enum: [host, peripheral]
    default: host

  connector:
    $ref: /schemas/connector/usb-connector.yaml#
    description:
      Connector for dual role switch, especially for "gpio-usb-b-connector"
    type: object

  port:
    description:
      Any connector to the data bus of this controller should be modelled
      using the OF graph bindings specified, if the "usb-role-switch"
      property is used. See graph.txt
    $ref: /schemas/graph.yaml#/properties/port

  enable-manual-drd:
    $ref: /schemas/types.yaml#/definitions/flag
    description:
      supports manual dual-role switch via debugfs; usually used when
      receptacle is TYPE-A and also wants to support dual-role mode.
    type: boolean

  wakeup-source:
    description: enable USB remote wakeup, see power/wakeup-source.txt
    type: boolean

  mediatek,syscon-wakeup:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    maxItems: 1
    description:
      A phandle to syscon used to access the register of the USB wakeup glue
      layer between xHCI and SPM, the field should always be 3 cells long.
    items:
      items:
        - description:
            The first cell represents a phandle to syscon
        - description:
            The second cell represents the register base address of the glue
            layer in syscon
        - description: |
            The third cell represents the hardware version of the glue layer,
            1 - used by mt8173 etc, revision 1 without following IPM rule;
            2 - used by mt2712 etc, revision 2 with following IPM rule;
            101 - used by mt8183, specific 1.01;
            102 - used by mt8192, specific 1.02;
          enum: [1, 2, 101, 102]

  mediatek,u3p-dis-msk:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: The mask to disable u3ports, bit0 for u3port0,
      bit1 for u3port1, ... etc

  mediatek,u2p-dis-msk:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: The mask to disable u2ports, bit0 for u2port0,
      bit1 for u2port1, ... etc; but can't disable u2port0 if dual role mode
      is enabled, so will be skipped in this case.

# Required child node when support dual-role
patternProperties:
  "^usb@[0-9a-f]+$":
    type: object
    $ref: /schemas/usb/mediatek,mtk-xhci.yaml#
    description:
      The xhci should be added as subnode to mtu3 as shown in the following
      example if the host mode is enabled.

dependencies:
  connector: [ 'usb-role-switch' ]
  port: [ 'usb-role-switch' ]
  role-switch-default-mode: [ 'usb-role-switch' ]
  wakeup-source: [ 'mediatek,syscon-wakeup' ]

required:
  - compatible
  - reg
  - reg-names
  - interrupts
  - clocks
  - clock-names

additionalProperties: false

examples:
  # Dual role switch by extcon
  - |
    #include <dt-bindings/clock/mt8173-clk.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/phy/phy.h>
    #include <dt-bindings/power/mt8173-power.h>

    usb@11271000 {
        compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
        reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
        reg-names = "mac", "ippc";
        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>;
        phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>;
        power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
        clocks = <&topckgen CLK_TOP_USB30_SEL>;
        clock-names = "sys_ck";
        vusb33-supply = <&mt6397_vusb_reg>;
        vbus-supply = <&usb_p0_vbus>;
        extcon = <&extcon_usb>;
        dr_mode = "otg";
        wakeup-source;
        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        xhci: usb@11270000 {
            compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
            reg = <0x11270000 0x1000>;
            reg-names = "mac";
            interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
            power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
            clock-names = "sys_ck", "ref_ck";
            vusb33-supply = <&mt6397_vusb_reg>;
        };
    };

  # Dual role switch by gpio-usb-b-connector
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/power/mt2712-power.h>

    usb@112c1000 {
        compatible = "mediatek,mt2712-mtu3", "mediatek,mtu3";
        reg = <0x112c1000 0x3000>, <0x112d0700 0x0100>;
        reg-names = "mac", "ippc";
        interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_LOW>;
        phys = <&u2port2 PHY_TYPE_USB2>;
        power-domains = <&scpsys MT2712_POWER_DOMAIN_USB2>;
        clocks = <&topckgen CLK_TOP_USB30_SEL>;
        clock-names = "sys_ck";
        dr_mode = "otg";
        usb-role-switch;
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        host0: usb@11270000 {
            compatible = "mediatek,mt2712-xhci", "mediatek,mtk-xhci";
            reg = <0x11270000 0x1000>;
            reg-names = "mac";
            interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_LOW>;
            power-domains = <&scpsys MT2712_POWER_DOMAIN_USB>;
            clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
            clock-names = "sys_ck", "ref_ck";
        };

        connector {
            compatible = "gpio-usb-b-connector", "usb-b-connector";
            type = "micro";
            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
            vbus-supply = <&usb_p0_vbus>;
        };
    };

  # Dual role switch with type-c
  - |
    usb@11201000 {
        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
        reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
        reg-names = "mac", "ippc";
        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
        phys = <&u2port0 PHY_TYPE_USB2>;
        clocks = <&clk26m>;
        clock-names = "sys_ck";
        mediatek,syscon-wakeup = <&pericfg 0x400 1>;
        wakeup-source;
        dr_mode = "otg";
        usb-role-switch;
        role-switch-default-mode = "host";
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        host: usb@11200000 {
            compatible = "mediatek,mt8183-xhci", "mediatek,mtk-xhci";
            reg = <0x11200000 0x1000>;
            reg-names = "mac";
            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
            clocks = <&clk26m>;
            clock-names = "sys_ck";
        };

        port {
            usb_role_sw: endpoint {
                remote-endpoint = <&hs_ep>;
            };
        };
    };

...