1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (c) 2021 T-Chip Intelligent Technology Co., Ltd
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3328-roc-cc.dts"
/ {
model = "Firefly ROC-RK3328-PC";
compatible = "firefly,roc-rk3328-pc", "rockchip,rk3328";
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1750000>;
/* This button is unpopulated out of the factory. */
button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <10000>;
};
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
linux,rc-map-name = "rc-khadas";
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_en>, <&wifi_host_wake>;
reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
};
};
&codec {
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
};
&gpu {
mali-supply = <&vdd_logic>;
};
&pinctrl {
ir {
ir_int: ir-int {
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sdmmcio {
sdio_per_pin: sdio-per-pin {
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wifi {
wifi_en: wifi-en {
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
wifi_host_wake: wifi-host-wake {
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none_4ma>;
};
bt_rst: bt-rst {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
bt_en: bt-en {
rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pmic_int_l {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
};
&rk805 {
interrupt-parent = <&gpio0>;
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
};
&saradc {
vref-supply = <&vcc_18>;
status = "okay";
};
&usb20_host_drv {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
&vcc_host1_5v {
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
};
&vcc_sdio {
gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sdio_per_pin>;
};
|
