diff options
Diffstat (limited to 'tests/scripts/lloadd/test004-monitor')
| -rwxr-xr-x | tests/scripts/lloadd/test004-monitor | 345 |
1 files changed, 345 insertions, 0 deletions
diff --git a/tests/scripts/lloadd/test004-monitor b/tests/scripts/lloadd/test004-monitor new file mode 100755 index 0000000..d1db7c1 --- /dev/null +++ b/tests/scripts/lloadd/test004-monitor @@ -0,0 +1,345 @@ +#! /bin/sh +# $OpenLDAP$ +## This work is part of OpenLDAP Software <http://www.openldap.org/>. +## +## Copyright 1998-2022 The OpenLDAP Foundation. +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted only as authorized by the OpenLDAP +## Public License. +## +## A copy of this license is available in the file LICENSE in the +## top-level directory of the distribution or, alternatively, at +## <http://www.OpenLDAP.org/license.html>. + +echo "running defines.sh" +. $SRCDIR/scripts/defines.sh + +mkdir -p $TESTDIR $DBDIR1 $DBDIR2 + +$SLAPPASSWD -g -n >$CONFIGPWF +echo "rootpw `$SLAPPASSWD -T $CONFIGPWF`" >$TESTDIR/configpw.conf + +if test $AC_lloadd = lloaddyes ; then + echo "Load balancer module not available, skipping..." + exit 0 +fi + +# Monitor counts are unstable in the face of concurrency, since different +# clients may get different upstreams assigned for their operations. This might +# also change later when tiered load balancing is available. +# Another constraint is that some global counts are updated by the statistics +# collection task scheduled to run every second. +# +# This test assumes current round-robin policy: +# - default backend is rotated every time we successfully pick an upstream +# - upstream connections within the same backend are rotated in the same way +# - the monitor entry order for upstream connections reflects the connection +# order within its CIRCLEQ_ + +echo "Starting the first slapd on TCP/IP port $PORT2..." +. $CONFFILTER $BACKEND < $CONF > $CONF2 +$SLAPADD -f $CONF2 -l $LDIFORDERED +RC=$? +if test $RC != 0 ; then + echo "slapadd failed ($RC)!" + exit $RC +fi + +echo "Running slapindex to index slapd database..." +$SLAPINDEX -f $CONF2 +RC=$? +if test $RC != 0 ; then + echo "warning: slapindex failed ($RC)" + echo " assuming no indexing support" +fi + +$SLAPD -f $CONF2 -h $URI2 -d $LVL > $LOG2 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +PID2="$PID" +KILLPIDS="$PID" + +echo "Testing slapd searching..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -H $URI2 \ + '(objectclass=*)' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting $SLEEP1 seconds for slapd to start..." + sleep $SLEEP1 +done +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Running slapadd to build slapd database..." +. $CONFFILTER $BACKEND < $CONFTWO > $CONF3 +$SLAPADD -f $CONF3 -l $LDIFORDERED +RC=$? +if test $RC != 0 ; then + echo "slapadd failed ($RC)!" + exit $RC +fi + +echo "Running slapindex to index slapd database..." +$SLAPINDEX -f $CONF3 +RC=$? +if test $RC != 0 ; then + echo "warning: slapindex failed ($RC)" + echo " assuming no indexing support" +fi + +echo "Starting second slapd on TCP/IP port $PORT3..." +$SLAPD -f $CONF3 -h $URI3 -d $LVL > $LOG3 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +PID3="$PID" +KILLPIDS="$KILLPIDS $PID" + +sleep $SLEEP0 + +echo "Testing slapd searching..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -H $URI3 \ + '(objectclass=*)' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting $SLEEP1 seconds for slapd to start..." + sleep $SLEEP1 +done +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Starting lloadd on TCP/IP port $PORT1..." +. $CONFFILTER $BACKEND < $LLOADDEMPTYCONF > $CONF1.lloadd +. $CONFFILTER $BACKEND < $SLAPDLLOADCONF > $CONF1.slapd +$SLAPD -f $CONF1.slapd -h $URI6 -d $LVL > $LOG1 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +KILLPIDS="$KILLPIDS $PID" + +echo "Testing slapd searching..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -H $URI6 \ + '(objectclass=*)' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting $SLEEP1 seconds for lloadd to start..." + sleep $SLEEP1 +done + +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Sending a search request to prime the counters..." +$LDAPSEARCH -b "$BASEDN" -s base -H $URI1 >> $TESTOUT 2>&1 +RC=$? +if test $RC != 52 ; then + echo "ldapsearch should have failed ($RC != 52)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Retrieving data from cn=monitor..." +echo "# Retrieving data from an empty lload's cn=monitor..." >>$SEARCHOUT +echo "# Operations received:" >>$SEARCHOUT +echo "# Bind: 1 (0 forwarded)" >>$SEARCHOUT +echo "# Search: 0" >>$SEARCHOUT +echo "# Unbind: 1" >>$SEARCHOUT +$LDAPSEARCH -b "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \ + olmBalancer olmBalancerServer olmBalancerOperation olmBalancerConnection >> $SEARCHOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Adding first backend server..." +$LDAPMODIFY -D cn=config -H $URI6 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1 +dn: cn=first,olcBackend={0}lload,cn=config +changetype: add +objectClass: olcBkLloadBackendConfig +olcBkLloadBackendUri: $URI2 +olcBkLloadMaxPendingConns: 3 +olcBkLloadMaxPendingOps: 5 +olcBkLloadRetry: 1000 +olcBkLloadNumconns: 2 +olcBkLloadBindconns: 2 +EOF +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed for backend ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +# At the moment, the global counters are updated by a recurring job, +# wait for it to settle +echo "Waiting until connections are established..." +for i in 0 1 2 3 4 5; do + $LDAPCOMPARE "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \ + 'olmOutgoingConnections:4' > /dev/null 2>&1 + RC=$? + if test $RC = 6 ; then + break + fi + echo "Waiting $SLEEP1 seconds until connections are established..." + sleep $SLEEP1 +done +if test $RC != 6 ; then + echo "ldapcompare failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Retrieving data from cn=monitor again..." +echo >>$SEARCHOUT +echo "# Retrieving data from lload's cn=monitor..." >>$SEARCHOUT +$LDAPSEARCH -b "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \ + olmBalancer olmBalancerServer olmBalancerOperation olmBalancerConnection >> $SEARCHOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Adding another backend server..." +$LDAPMODIFY -D cn=config -H $URI6 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1 +dn: cn=server 2,olcBackend={0}lload,cn=config +changetype: add +objectClass: olcBkLloadBackendConfig +olcBkLloadBackendUri: $URI3 +olcBkLloadMaxPendingConns: 3 +olcBkLloadMaxPendingOps: 5 +olcBkLloadRetry: 1000 +olcBkLloadNumconns: 4 +olcBkLloadBindconns: 5 +EOF +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed for backend ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +# At the moment, the global counters are updated by a recurring job, +# wait for it to settle +echo "Waiting until connections are established..." +for i in 0 1 2 3 4 5; do + $LDAPCOMPARE "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \ + 'olmOutgoingConnections:13' > /dev/null 2>&1 + RC=$? + if test $RC = 6 ; then + break + fi + echo "Waiting $SLEEP1 seconds until connections are established..." + sleep $SLEEP1 +done +if test $RC != 6 ; then + echo "ldapcompare failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Sending another search request..." +$LDAPSEARCH -b "$BASEDN" -s base -H $URI1 >> $TESTOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Sending a WhoAmI? request..." +$LDAPWHOAMI -D "$BABSDN" -w bjensen -H $URI1 >> $TESTOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapwhoami failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +# At the moment, the global counters are updated by a recurring job, +# wait for it to settle +echo "Waiting until global counters are updated..." +for i in 0 1 2 3 4 5; do + $LDAPCOMPARE "cn=Other,cn=Operations,cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \ + 'olmCompletedOps:2' > /dev/null 2>&1 + RC=$? + if test $RC = 6 ; then + break + fi + echo "Waiting $SLEEP1 seconds until connections are established..." + sleep $SLEEP1 +done +if test $RC != 6 ; then + echo "ldapcompare failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Retrieving data from cn=monitor again..." +echo >>$SEARCHOUT +echo "# Retrieving data after a search+WhoAmI?..." >>$SEARCHOUT +echo "# Operations received:" >>$SEARCHOUT +echo "# Bind: 3 (2 forwarded)" >>$SEARCHOUT +echo "# Search: 1" >>$SEARCHOUT +echo "# Extended: 1 (WhoAmI?)" >>$SEARCHOUT +echo "# Unbind: 3" >>$SEARCHOUT +$LDAPSEARCH -b "cn=Load Balancer,cn=Backends,cn=monitor" -H $URI6 \ + olmBalancer olmBalancerServer olmBalancerOperation olmBalancerConnection >> $SEARCHOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +test $KILLSERVERS != no && kill -HUP $KILLPIDS + +LDIF=$DATADIR/lloadd/monitor.ldif + +echo "Filtering ldapsearch results..." +$LDIFFILTER < $SEARCHOUT > $SEARCHFLT +echo "Filtering original ldif used to create database..." +$LDIFFILTER < $LDIF > $LDIFFLT +echo "Comparing filter output..." +$CMP $SEARCHFLT $LDIFFLT > $CMPOUT + +if test $? != 0 ; then + echo "Comparison failed" + exit 1 +fi + +echo ">>>>> Test succeeded" + +test $KILLSERVERS != no && wait + +exit 0 |