diff options
Diffstat (limited to 'README_FILES/MILTER_README')
| -rw-r--r-- | README_FILES/MILTER_README | 648 |
1 files changed, 648 insertions, 0 deletions
diff --git a/README_FILES/MILTER_README b/README_FILES/MILTER_README new file mode 100644 index 0000000..9e866d4 --- /dev/null +++ b/README_FILES/MILTER_README @@ -0,0 +1,648 @@ +PPoossttffiixx bbeeffoorree--qquueeuuee MMiilltteerr ssuuppppoorrtt + +------------------------------------------------------------------------------- + +IInnttrroodduuccttiioonn + +Postfix implements support for the Sendmail version 8 Milter (mail filter) +protocol. This protocol is used by applications that run outside the MTA to +inspect SMTP events (CONNECT, DISCONNECT), SMTP commands (HELO, MAIL FROM, +etc.) as well as mail content (headers and body). All this happens before mail +is queued. + +The reason for adding Milter support to Postfix is that there exists a large +collection of applications, not only to block unwanted mail, but also to verify +authenticity (examples: OpenDKIM and DMARC) or to digitally sign mail (example: +OpenDKIM). Having yet another Postfix-specific version of all that software is +a poor use of human and system resources. + +The Milter protocol has evolved over time, and different Postfix versions +implement different feature sets. See the workarounds and limitations sections +at the end of this document for differences between Postfix and Sendmail +implementations. + +This document provides information on the following topics: + + * How Milter applications plug into Postfix + * Building Milter applications + * Running Milter applications + * Configuring Postfix + * Workarounds + * Limitations + +HHooww MMiilltteerr aapppplliiccaattiioonnss pplluugg iinnttoo PPoossttffiixx + +The Postfix Milter implementation uses two different lists of mail filters: one +list of filters for SMTP mail only, and one list of filters for non-SMTP mail. +The two lists have different capabilities, which is unfortunate. Avoiding this +would require major restructuring of Postfix. + + * The SMTP-only filters handle mail that arrives via the Postfix smtpd(8) + server. They are typically used to filter unwanted mail and to sign mail + from authorized SMTP clients. You specify SMTP-only Milter applications + with the smtpd_milters parameter as described in a later section. Mail that + arrives via the Postfix smtpd(8) server is not filtered by the non-SMTP + filters that are described next. + + * The non-SMTP filters handle mail that arrives via the Postfix sendmail(1) + command-line or via the Postfix qmqpd(8) server. They are typically used to + digitally sign mail only. Although non-SMTP filters can be used to filter + unwanted mail, they have limitations compared to the SMTP-only filters. You + specify non-SMTP Milter applications with the non_smtpd_milters parameter + as described in a later section. + +For those who are familiar with the Postfix architecture, the figure below +shows how Milter applications plug into Postfix. Names followed by a number are +Postfix commands or server programs, while unnumbered names inside shaded areas +represent Postfix queues. To avoid clutter, the path for local submission is +simplified (the OVERVIEW document has a more complete description of the +Postfix architecture). + + SMTP-only non-SMTP + filters filters + + ^ | + | v + ^ | + | | + Network -> smtpd(8) | | + | v + + \ + + Network -> qmqpd(8) -> cleanup(8) -> incoming + + / + + pickup(8) + + : + + Local -> sendmail(1) + +BBuuiillddiinngg MMiilltteerr aapppplliiccaattiioonnss + +Milter applications have been written in C, JAVA and Perl, but this document +deals with C applications only. For these, you need an object library that +implements the Sendmail 8 Milter protocol. Postfix currently does not provide +such a library, but Sendmail does. + +Some systems install the Sendmail libmilter library by default. With other +systems, libmilter may be provided by a package (called "sendmail-devel" on +some Linux systems). + +Once libmilter is installed, applications such as OpenDKIM and OpenDMARC build +out of the box without requiring any tinkering: + + $ ggzzccaatt ooppeennddkkiimm--xx..yy..zz..ttaarr..ggzz || ttaarr xxff -- + $ ccdd ooppeennddkkiimm--xx..yy..zz + $ ..//ccoonnffiigguurree ......ooppttiioonnss...... + $ mmaakkee + [...lots of output omitted...] + $ mmaakkee iinnssttaallll + +RRuunnnniinngg MMiilltteerr aapppplliiccaattiioonnss + +To run a Milter application, see the documentation of the filter for options. A +typical command looks like this: + + # //ssoommee//wwhheerree//ooppeennddkkiimm --ll --uu uusseerriidd --pp iinneett::ppoorrttnnuummbbeerr@@llooccaallhhoosstt ......ootthheerr + ooppttiioonnss...... + +Please specify a userid value that isn't used for other applications (not +"postfix", not "www", etc.). + +CCoonnffiigguurriinngg PPoossttffiixx + +Like Sendmail, Postfix has a lot of configuration options that control how it +talks to Milter applications. Besides global options that apply to all Milter +applications, Postfix 3.0 and later support per-Milter timeouts, per-Milter +error handling, etc. + +Information in this section: + + * SMTP-Only Milter applications + * Non-SMTP Milter applications + * Milter error handling + * Milter protocol version + * Milter protocol timeouts + * Different settings for different Milter applications + * Different settings for different SMTP clients + * Sendmail macro emulation + * What macros will Postfix send to Milters? + +SSMMTTPP--OOnnllyy MMiilltteerr aapppplliiccaattiioonnss + +The SMTP-only Milter applications handle mail that arrives via the Postfix +smtpd(8) server. They are typically used to filter unwanted mail, and to sign +mail from authorized SMTP clients. Mail that arrives via the Postfix smtpd(8) +server is not filtered by the non-SMTP filters that are described in the next +section. + + NOTE for Postfix versions that have a mail_release_date before 20141018: do + not use the header_checks(5) IGNORE action to remove Postfix's own + Received: message header. This causes problems with mail signing filters. + Instead, keep Postfix's own Received: message header and use the + header_checks(5) REPLACE action to sanitize information. + +You specify SMTP-only Milter applications (there can be more than one) with the +smtpd_milters parameter. Each Milter application is identified by the name of +its listening socket; other Milter configuration options will be discussed in +later sections. Milter applications are applied in the order as specified, and +the first Milter application that rejects a command will override the responses +from other Milter applications. + + /etc/postfix/main.cf: + # Milters for mail that arrives via the smtpd(8) server. + # See below for socket address syntax. + smtpd_milters = inet:localhost:portnumber ...other filters... + +The general syntax for listening sockets is as follows: + + uunniixx::pathname + Connect to the local UNIX-domain server that is bound to the specified + pathname. If the smtpd(8) or cleanup(8) process runs chrooted, an + absolute pathname is interpreted relative to the Postfix queue + directory. On many systems, llooccaall is a synonym for uunniixx + + iinneett::host::port + Connect to the specified TCP port on the specified local or remote + host. The host and port can be specified in numeric or symbolic form. + + NOTE: Postfix syntax differs from Milter syntax which has the form + iinneett::port@@host. + +For advanced configuration see "Different settings for different SMTP clients" +and "Different settings for different Milter applications". + +NNoonn--SSMMTTPP MMiilltteerr aapppplliiccaattiioonnss + +The non-SMTP Milter applications handle mail that arrives via the Postfix +sendmail(1) command-line or via the Postfix qmqpd(8) server. They are typically +used to digitally sign mail. Although non-SMTP filters can be used to filter +unwanted mail, there are limitations as discussed later in this section. Mail +that arrives via the Postfix smtpd(8) server is not filtered by the non-SMTP +filters. + +NOTE: Do not use the header_checks(5) IGNORE action to remove Postfix's own +Received: message header. This causes problems with mail signing filters. +Instead, keep Postfix's own Received: message header and use the header_checks +(5) REPLACE action to sanitize information. + +You specify non-SMTP Milter applications with the non_smtpd_milters parameter. +This parameter uses the same syntax as the smtpd_milters parameter in the +previous section. As with the SMTP-only filters, you can specify more than one +Milter application; they are applied in the order as specified, and the first +Milter application that rejects a command will override the responses from the +other applications. + + /etc/postfix/main.cf: + # Milters for non-SMTP mail. + # See below for socket address syntax. + non_smtpd_milters = inet:localhost:portnumber ...other filters... + +There's one small complication when using Milter applications for non-SMTP +mail: there is no SMTP session. To keep Milter applications happy, the Postfix +cleanup(8) server actually has to simulate the SMTP client CONNECT and +DISCONNECT events, and the SMTP client EHLO, MAIL FROM, RCPT TO and DATA +commands. + + * When new mail arrives via the sendmail(1) command line, the Postfix cleanup + (8) server pretends that the mail arrives with ESMTP from "localhost" with + IP address "127.0.0.1". The result is very similar to what happens with + command line submissions in Sendmail version 8.12 and later, although + Sendmail uses a different mechanism to achieve this result. + + * When new mail arrives via the qmqpd(8) server, the Postfix cleanup(8) + server pretends that the mail arrives with ESMTP, and uses the QMQPD client + hostname and IP address. + + * When old mail is re-injected into the queue with "postsuper -r", the + Postfix cleanup(8) server uses the same client information that was used + when the mail arrived as new mail. + +This generally works as expected, with only one exception: non-SMTP filters +must not REJECT or TEMPFAIL simulated RCPT TO commands. When a +non_smtpd_milters application REJECTs or TEMPFAILs a recipient, Postfix will +report a configuration error, and mail will stay in the queue. + +SSiiggnniinngg iinntteerrnnaallllyy--ggeenneerraatteedd bboouunnccee mmeessssaaggeess + +Postfix normally does not apply content filters to mail that is generated +internally such as bounces or Postmaster notifications. Filtering internally- +generated bounces would result in loss of mail when a filter rejects a message, +as the resulting double-bounce message would almost certainly also be blocked. + +To sign Postfix's own bounce messages, enable filtering of internally-generated +bounces (line 2 below), and don't reject any internally-generated bounces with +non_smtpd_milters, header_checks or body_checks (lines 3-5 below). + + 1 /etc/postfix/main.cf: + 2 internal_mail_filter_classes = bounce + 3 non_smtpd_milters = don't reject internally-generated bounces + 4 header_checks = don't reject internally-generated bounces + 5 body_checks = don't reject internally-generated bounces + +MMiilltteerr eerrrroorr hhaannddlliinngg + +The milter_default_action parameter specifies how Postfix handles Milter +application errors. The default action is to respond with a temporary error +status, so that the client will try again later. Specify "accept" if you want +to receive mail as if the filter does not exist, and "reject" to reject mail +with a permanent status. The "quarantine" action is like "accept" but freezes +the message in the "hold" queue, and is available with Postfix 2.6 or later. + + /etc/postfix/main.cf: + # What to do in case of errors? Specify accept, reject, tempfail, + # or quarantine (Postfix 2.6 or later). + milter_default_action = tempfail + +See "Different settings for different Milter applications" for advanced +configuration options. + +MMiilltteerr pprroottooccooll vveerrssiioonn + +As Postfix is not built with the Sendmail libmilter library, you may need to +configure the Milter protocol version that Postfix should use. The default +version is 6 (before Postfix 2.6 the default version is 2). + + /etc/postfix/main.cf: + # Postfix >= 2.6 + milter_protocol = 6 + # 2.3 <= Postfix <= 2.5 + milter_protocol = 2 + +If the Postfix milter_protocol setting specifies a too low version, the +libmilter library will log an error message like this: + + application name: st_optionneg[xxxxx]: 0xyy does not fulfill action + requirements 0xzz + +The remedy is to increase the Postfix milter_protocol version number. See, +however, the limitations section below for features that aren't supported by +Postfix. + +With Postfix 2.7 and earlier, if the Postfix milter_protocol setting specifies +a too high version, the libmilter library simply hangs up without logging a +warning, and you see a Postfix warning message like one of the following: + + warning: milter inet:host:port: can't read packet header: Unknown error : 0 + warning: milter inet:host:port: can't read packet header: Success + warning: milter inet:host:port: can't read SMFIC_DATA reply packet header: + No such file or directory + +The remedy is to lower the Postfix milter_protocol version number. Postfix 2.8 +and later will automatically turn off protocol features that the application's +libmilter library does not expect. + +See "Different settings for different Milter applications" for advanced +configuration options. + +MMiilltteerr pprroottooccooll ttiimmeeoouuttss + +Postfix uses different time limits at different Milter protocol stages. The +table shows the timeout settings and the corresponding protocol stages (EOH = +end of headers; EOM = end of message). + + _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ + |PPoossttffiixx ppaarraammeetteerr |TTiimmee lliimmiitt|MMiilltteerr pprroottooccooll ssttaaggee | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_connect_timeout|30s |CONNECT | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_command_timeout|30s |HELO, MAIL, RCPT, DATA, UNKNOWN| + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_content_timeout|300s |HEADER, EOH, BODY, EOM | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + +Beware: 30s may be too short for Milter applications that do lots of DNS +lookups. However, if you increase the above timeouts too much, remote SMTP +clients may hang up and mail may be delivered multiple times. This is an +inherent problem with before-queue filtering. + +See "Different settings for different Milter applications" for advanced +configuration options. + +DDiiffffeerreenntt sseettttiinnggss ffoorr ddiiffffeerreenntt MMiilltteerr aapppplliiccaattiioonnss + +The previous sections list a number of Postfix main.cf parameters that control +time limits and other settings for all Postfix Milter clients. This is +sufficient for simple configurations. With more complex configurations it +becomes desirable to have different settings for different Milter clients. This +is supported with Postfix 3.0 and later. + +The following example shows a "non-critical" Milter client with a short connect +timeout, and with "accept" as default action when the service is unvailable. + + 1 /etc/postfix/main.cf: + 2 smtpd_milters = { inet:host:port, + 3 connect_timeout=10s, default_action=accept } + +Instead of a server endpoint, we now have a list enclosed in {}. + + * Line 2: The first item in the list is the server endpoint. This supports + the exact same "inet" and "unix" syntax as described earlier. + + * Line 3: The remainder of the list contains per-Milter settings. These + settings override global main.cf parameters, and have the same name as + those parameters, without the "milter_" prefix. The per-Milter settings + that are supported as of Postfix 3.0 are command_timeout, connect_timeout, + content_timeout, default_action, and protocol. + +Inside the list, syntax is similar to what we already know from main.cf: items +separated by space or comma. There is one difference: yyoouu mmuusstt eenncclloossee aa +sseettttiinngg iinn ppaarreenntthheesseess,, aass iinn ""{{ nnaammee == vvaalluuee }}"",, iiff yyoouu wwaanntt ttoo hhaavvee ssppaaccee oorr +ccoommmmaa wwiitthhiinn aa vvaalluuee oorr aarroouunndd ""=="". + +DDiiffffeerreenntt sseettttiinnggss ffoorr ddiiffffeerreenntt SSMMTTPP cclliieennttss + +The smtpd_milter_maps feature supports different Milter settings for different +client IP addresses. Lookup results override the the global smtpd_milters +setting, and have the same syntax. For example, to disable Milter settings for +local address ranges: + +/etc/postfix/main.cf: + smtpd_milter_maps = cidr:/etc/postfix/smtpd_milter_map + smtpd_milters = inet:host:port, { inet:host:port, ... }, ... + +/etc/postfix/smtpd_milter_map: + # Disable Milters for local clients. + 127.0.0.0/8 DISABLE + 192.168.0.0/16 DISABLE + ::/64 DISABLE + 2001:db8::/32 DISABLE + +This feature is available with Postfix 3.2 and later. + +SSeennddmmaaiill mmaaccrroo eemmuullaattiioonn + +Postfix emulates a limited number of Sendmail macros, as shown in the table. +Some macro values depend on whether a recipient is rejected (rejected +recipients are available on request by the Milter application). Different +macros are available at different Milter protocol stages (EOH = end-of-header, +EOM = end-of-message); their availability is not always the same as in +Sendmail. See the workarounds section below for solutions. + + _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ + |SSeennddmmaaiill mmaaccrroo |MMiilltteerr pprroottooccooll ssttaaggee |DDeessccrriippttiioonn | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |i |DATA, EOH, EOM |Queue ID, also Postfix | + | | |queue file name | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |j |Always |Value of myhostname | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |_ |Always |The validated client name | + | | |and address | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{auth_authen} |MAIL, DATA, EOH, EOM |SASL login name | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{auth_author} |MAIL, DATA, EOH, EOM |SASL sender | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{auth_type} |MAIL, DATA, EOH, EOM |SASL login method | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{client_addr} |Always |Remote client IP address | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | | |Connection concurrency for| + | | |this client (zero if the | + |{client_connections}|CONNECT |client is excluded from | + | | |all smtpd_client_* | + | | |limits). | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | | |Remote client hostname | + | | |When address -> name | + |{client_name} |Always |lookup or name -> address | + | | |verification fails: | + | | |"unknown" | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{client_port} |Always (Postfix >=2.5) |Remote client TCP port | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | | |Client name from address -| + |{client_ptr} |CONNECT, HELO, MAIL, DATA|> name lookup | + | | |When address -> name | + | | |lookup fails: "unknown" | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{cert_issuer} |HELO, MAIL, DATA, EOH, |TLS client certificate | + | |EOM |issuer | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{cert_subject} |HELO, MAIL, DATA, EOH, |TLS client certificate | + | |EOM |subject | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{cipher_bits} |HELO, MAIL, DATA, EOH, |TLS session key size | + | |EOM | | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{cipher} |HELO, MAIL, DATA, EOH, |TLS cipher | + | |EOM | | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{daemon_addr} |Always (Postfix >=3.2) |Local server IP address | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{daemon_name} |Always |value of | + | | |milter_macro_daemon_name | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{daemon_port} |Always (Postfix >=3.2) |Local server TCP port | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{mail_addr} |MAIL |Sender address | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{mail_host} |MAIL (Postfix >= 2.6, |Sender next-hop | + | |only with smtpd_milters) |destination | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{mail_mailer} |MAIL (Postfix >= 2.6, |Sender mail delivery | + | |only with smtpd_milters) |transport | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | | |Recipient address | + |{rcpt_addr} |RCPT |With rejected recipient: | + | | |descriptive text | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | | |Recipient next-hop | + |{rcpt_host} |RCPT (Postfix >= 2.6, |destination | + | |only with smtpd_milters) |With rejected recipient: | + | | |enhanced status code | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | | |Recipient mail delivery | + |{rcpt_mailer} |RCPT (Postfix >= 2.6, |transport | + | |only with smtpd_milters) |With rejected recipient: | + | | |"error" | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |{tls_version} |HELO, MAIL, DATA, EOH, |TLS protocol version | + | |EOM | | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |v |Always |value of milter_macro_v | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + +WWhhaatt mmaaccrrooss wwiillll PPoossttffiixx sseenndd ttoo MMiilltteerrss?? + +Postfix sends specific sets of macros at different Milter protocol stages. The +sets are configured with the parameters as shown in the table below (EOH = end +of headers; EOM = end of message). The protocol version is a number that +Postfix sends at the beginning of the Milter protocol handshake. + +As of Sendmail 8.14.0, Milter applications can specify what macros they want to +receive at different Milter protocol stages. An application-specified list +takes precedence over a Postfix-specified list. + + _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ + |PPoossttffiixx ppaarraammeetteerr |MMiilltteerr pprroottooccooll|MMiilltteerr pprroottooccooll ssttaaggee| + | |vveerrssiioonn | | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_connect_macros |2 or higher |CONNECT | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_helo_macros |2 or higher |HELO/EHLO | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_mail_macros |2 or higher |MAIL FROM | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_rcpt_macros |2 or higher |RCPT TO | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_data_macros |4 or higher |DATA | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_end_of_header_macros |6 or higher |EOH | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_end_of_data_macros |2 or higher |EOM | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + |milter_unknown_command_macros|3 or higher |unknown command | + |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + +By default, Postfix will send only macros whose values have been updated with +information from main.cf or master.cf, from an SMTP session (for example; SASL +login, or TLS certificates) or from a Mail delivery transaction (for example; +queue ID, sender, or recipient). + +To force a macro to be sent even when its value has not been updated, you may +specify macro default values with the milter_macro_defaults parameter. Specify +zero or more name=value pairs separated by comma or whitespace; you may even +specify macro names that Postfix does not know about! + +WWoorrkkaarroouunnddss + + * To avoid breaking DKIM etc. signatures with an SMTP-based content filter, + update the before-filter SMTP client in master.cf, and add a line with "- + o disable_mime_output_conversion=yes" (note: no spaces around the "="). For + details, see the advanced content filter example. + + /etc/postfix/master.cf: + # ============================================================= + # service type private unpriv chroot wakeup maxproc command + # (yes) (yes) (yes) (never) (100) + # ============================================================= + scan unix - - n - 10 smtp + -o smtp_send_xforward_command=yes + -o disable_mime_output_conversion=yes + -o smtp_generic_maps= + + * Some Milter applications use the "{if_addr}" macro to recognize local mail; + this macro does not exist in Postfix. Workaround: use the "{daemon_addr}" + (Postfix >= 3.2) or "{client_addr}" macro instead. + + * Some Milter applications log a warning that looks like this: + + sid-filter[36540]: WARNING: sendmail symbol 'i' not available + + And they may insert an ugly message header with "unknown-msgid" like this: + + X-SenderID: Sendmail Sender-ID Filter vx.y.z host.example.com <unknown- + msgid> + + The problem is that Milter applications expect that the queue ID is known + before the MTA accepts the MAIL FROM (sender) command. Postfix does not + choose a queue ID, which is used as the queue file name, until after it + accepts the first valid RCPT TO (recipient) command. + + If you experience the ugly header problem, see if a recent version of the + Milter application fixes it. For example, current versions of dkim-filter + and dk-filter already have code that looks up the Postfix queue ID at a + later protocol stage, and sid-filter version 1.0.0 no longer includes the + queue ID in the message header. + + To fix the ugly message header, you will need to add code that looks up the + Postfix queue ID at some later point in time. The example below adds the + lookup after the end-of-message. + + o Edit the filter source file (typically named xxx-filter/xxx-filter.c or + similar). + + o Look up the mlfi_eom() function and add code near the top shown as bboolldd + text below: + + dfc = cc->cctx_msg; + assert(dfc != NULL); + + //** DDeetteerrmmiinnee tthhee jjoobb IIDD ffoorr llooggggiinngg.. **// + iiff ((ddffcc-->>mmccttxx__jjoobbiidd ==== 00 |||| ssttrrccmmpp((ddffcc-->>mmccttxx__jjoobbiidd,, JJOOBBIIDDUUNNKKNNOOWWNN)) ==== 00)) + {{ + cchhaarr **jjoobbiidd == ssmmffii__ggeettssyymmvvaall((ccttxx,, ""ii""));; + iiff ((jjoobbiidd !!== 00)) + ddffcc-->>mmccttxx__jjoobbiidd == jjoobbiidd;; + }} + + NOTES: + + o Different mail filters use slightly different names for variables. If + the above code does not compile, look elsewhere in the mail filter + source file for code that looks up the "i" macro value, and copy that + code. + + o This change fixes only the ugly message header, but not the WARNING + message. Fortunately, many Milters log that message only once. + +LLiimmiittaattiioonnss + +This section lists limitations of the Postfix Milter implementation. Some +limitations will be removed as the implementation is extended over time. Of +course the usual limitations of before-queue filtering will always apply. See +the CONTENT_INSPECTION_README document for a discussion. + + * The Milter protocol has evolved over time. Therefore, different Postfix + versions implement different feature sets. + + _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ + |PPoossttffiixx|SSuuppppoorrtteedd MMiilltteerr rreeqquueessttss | + |_ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | 2.6 |All Milter requests of Sendmail 8.14.0 (see notes below). | + |_ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | |All Milter requests of Sendmail 8.14.0, except: | + | |SMFIP_RCPT_REJ (report rejected recipients to the mail filter), | + | 2.5 |SMFIR_CHGFROM (replace sender, with optional ESMTP parameters), | + | |SMFIR_ADDRCPT_PAR (add recipient, with optional ESMTP | + | |parameters). | + |_ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | 2.4 |All Milter requests of Sendmail 8.13.0. | + |_ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + | 2.3 |All Milter requests of Sendmail 8.13.0, except: | + | |SMFIR_REPLBODY (replace message body). | + |_ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | + + * For Milter applications that are written in C, you need to use the Sendmail + libmilter library. + + * Postfix has TWO sets of mail filters: filters that are used for SMTP mail + only (specified with the smtpd_milters parameter), and filters for non-SMTP + mail (specified with the non_smtpd_milters parameter). The non-SMTP filters + are primarily for local submissions. + + When mail is filtered by non_smtpd_milters, the Postfix cleanup(8) server + has to simulate SMTP client requests. This works as expected, with only one + exception: non_smtpd_milters must not REJECT or TEMPFAIL simulated RCPT TO + commands. When this rule is violated, Postfix will report a configuration + error, and mail will stay in the queue. + + * When you use the before-queue content filter for incoming SMTP mail (see + SMTPD_PROXY_README), Milter applications have access only to the SMTP + command information; they have no access to the message header or body, and + cannot make modifications to the message or to the envelope. + + * Postfix 2.6 ignores the optional ESMTP parameters in requests to replace + the sender (SMFIR_CHGFROM) or to append a recipient (SMFIR_ADDRCPT_PAR). + Postfix logs a warning message when a Milter application supplies such + ESMTP parameters: + + warning: queue-id: cleanup_chg_from: ignoring ESMTP arguments "whatever" + warning: queue-id: cleanup_add_rcpt: ignoring ESMTP arguments "whatever" + + * Postfix 2.3 does not implement requests to replace the message body. Milter + applications log a warning message when they need this unsupported + operation: + + st_optionneg[134563840]: 0x3d does not fulfill action requirements 0x1e + + The solution is to use Postfix version 2.4 or later. + + * Most Milter configuration options are global. Future Postfix versions may + support per-Milter timeouts, per-Milter error handling, etc. + |