Adding upstream version 252.22.upstream/252.22upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 353 insertions, 0 deletions

diff --git a/test/units/testsuite-36.sh b/test/units/testsuite-36.sh
new file mode 100755
index 0000000..9705f2d
--- /dev/null
+++ b/test/units/testsuite-36.sh
@@ -0,0 +1,353 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+set -eux
+set -o pipefail
+
+at_exit() {
+    # shellcheck disable=SC2181
+    if [[ $? -ne 0 ]]; then
+        # We're exiting with a non-zero EC, let's dump test artifacts
+        # for easier debugging
+        [[ -v straceLog && -f "$straceLog" ]] && cat "$straceLog"
+        [[ -v journalLog && -f "$journalLog" ]] && cat "$journalLog"
+    fi
+}
+
+trap at_exit EXIT
+
+systemd-analyze log-level debug
+systemd-analyze log-target journal
+
+# Log files
+straceLog='strace.log'
+journalLog='journal.log'
+
+# Systemd config files
+testUnit='numa-test.service'
+testUnitFile="/run/systemd/system/$testUnit"
+testUnitNUMAConf="$testUnitFile.d/numa.conf"
+
+# Sleep constants (we should probably figure out something better but nothing comes to mind)
+sleepAfterStart=1
+
+# Journal cursor for easier navigation
+journalCursorFile="jounalCursorFile"
+
+startStrace() {
+    coproc strace -qq -p 1 -o "$straceLog" -e set_mempolicy -s 1024 ${1:+"$1"}
+    # Wait for strace to properly "initialize", i.e. until PID 1 has the TracerPid
+    # field set to the current strace's PID
+    while ! awk -v spid="$COPROC_PID" '/^TracerPid:/ {exit !($2 == spid);}' /proc/1/status; do sleep 0.1; done
+}
+
+stopStrace() {
+    [[ -v COPROC_PID ]] || return
+
+    local PID=$COPROC_PID
+    kill -s TERM "$PID"
+    # Make sure the strace process is indeed dead
+    while kill -0 "$PID" 2>/dev/null; do sleep 0.1; done
+}
+
+startJournalctl() {
+    : >"$journalCursorFile"
+    # Save journal's cursor for later navigation
+    journalctl --no-pager --cursor-file="$journalCursorFile" -n0 -ocat
+}
+
+stopJournalctl() {
+    local unit="${1:-init.scope}"
+    # Using journalctl --sync should be better than using SIGRTMIN+1, as
+    # the --sync wait until the synchronization is complete
+    echo "Force journald to write all queued messages"
+    journalctl --sync
+    journalctl -u "$unit" --cursor-file="$journalCursorFile" >"$journalLog"
+}
+
+checkNUMA() {
+    # NUMA enabled system should have at least NUMA node0
+    test -e /sys/devices/system/node/node0
+}
+
+writePID1NUMAPolicy() {
+    cat >"$confDir/numa.conf" <<EOF
+[Manager]
+NUMAPolicy=${1:?}
+NUMAMask=${2:-""}
+EOF
+}
+
+writeTestUnit() {
+    mkdir -p "$testUnitFile.d/"
+    printf "[Service]\nExecStart=/bin/sleep 3600\n" >"$testUnitFile"
+}
+
+writeTestUnitNUMAPolicy() {
+    cat >"$testUnitNUMAConf" <<EOF
+[Service]
+NUMAPolicy=${1:?}
+NUMAMask=${2:-""}
+EOF
+    systemctl daemon-reload
+}
+
+pid1ReloadWithStrace() {
+    startStrace
+    systemctl daemon-reload
+    sleep $sleepAfterStart
+    stopStrace
+}
+
+pid1ReloadWithJournal() {
+    startJournalctl
+    systemctl daemon-reload
+    stopJournalctl
+}
+
+pid1StartUnitWithStrace() {
+    startStrace '-f'
+    systemctl start "${1:?}"
+    sleep $sleepAfterStart
+    stopStrace
+}
+
+pid1StartUnitWithJournal() {
+    startJournalctl
+    systemctl start "${1:?}"
+    sleep $sleepAfterStart
+    stopJournalctl
+}
+
+pid1StopUnit() {
+    systemctl stop "${1:?}"
+}
+
+systemctlCheckNUMAProperties() {
+    local UNIT_NAME="${1:?}"
+    local NUMA_POLICY="${2:?}"
+    local NUMA_MASK="${3:-""}"
+    local LOGFILE
+
+    LOGFILE="$(mktemp)"
+
+    systemctl show -p NUMAPolicy "$UNIT_NAME" >"$LOGFILE"
+    grep "NUMAPolicy=$NUMA_POLICY" "$LOGFILE"
+
+    : >"$LOGFILE"
+
+    if [ -n "$NUMA_MASK" ]; then
+        systemctl show -p NUMAMask "$UNIT_NAME" >"$LOGFILE"
+        grep "NUMAMask=$NUMA_MASK" "$LOGFILE"
+    fi
+}
+
+writeTestUnit
+
+# Create systemd config drop-in directory
+confDir="/run/systemd/system.conf.d/"
+mkdir -p "$confDir"
+
+if ! checkNUMA; then
+    echo >&2 "NUMA is not supported on this machine, switching to a simple sanity check"
+
+    echo "PID1 NUMAPolicy=default && NUMAMask=0 check without NUMA support"
+    writePID1NUMAPolicy "default" "0"
+    startJournalctl
+    systemctl daemon-reload
+    stopJournalctl
+    grep "NUMA support not available, ignoring" "$journalLog"
+
+    echo "systemd-run NUMAPolicy=default && NUMAMask=0 check without NUMA support"
+    runUnit='numa-systemd-run-test.service'
+    startJournalctl
+    systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit "$runUnit" sleep 1000
+    sleep $sleepAfterStart
+    pid1StopUnit "$runUnit"
+    stopJournalctl "$runUnit"
+    grep "NUMA support not available, ignoring" "$journalLog"
+
+else
+    echo "PID1 NUMAPolicy support - Default policy w/o mask"
+    writePID1NUMAPolicy "default"
+    pid1ReloadWithStrace
+    # Kernel requires that nodemask argument is set to NULL when setting default policy
+    grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+    echo "PID1 NUMAPolicy support - Default policy w/ mask"
+    writePID1NUMAPolicy "default" "0"
+    pid1ReloadWithStrace
+    grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+    echo "PID1 NUMAPolicy support - Bind policy w/o mask"
+    writePID1NUMAPolicy "bind"
+    pid1ReloadWithJournal
+    grep "Failed to set NUMA memory policy, ignoring: Invalid argument" "$journalLog"
+
+    echo "PID1 NUMAPolicy support - Bind policy w/ mask"
+    writePID1NUMAPolicy "bind" "0"
+    pid1ReloadWithStrace
+    grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" "$straceLog"
+
+    echo "PID1 NUMAPolicy support - Interleave policy w/o mask"
+    writePID1NUMAPolicy "interleave"
+    pid1ReloadWithJournal
+    grep "Failed to set NUMA memory policy, ignoring: Invalid argument" "$journalLog"
+
+    echo "PID1 NUMAPolicy support - Interleave policy w/ mask"
+    writePID1NUMAPolicy "interleave" "0"
+    pid1ReloadWithStrace
+    grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" "$straceLog"
+
+    echo "PID1 NUMAPolicy support - Preferred policy w/o mask"
+    writePID1NUMAPolicy "preferred"
+    pid1ReloadWithJournal
+    # Preferred policy with empty node mask is actually allowed and should reset allocation policy to default
+    grep "Failed to set NUMA memory policy, ignoring: Invalid argument" "$journalLog" && { echo >&2 "unexpected pass"; exit 1; }
+
+    echo "PID1 NUMAPolicy support - Preferred policy w/ mask"
+    writePID1NUMAPolicy "preferred" "0"
+    pid1ReloadWithStrace
+    grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" "$straceLog"
+
+    echo "PID1 NUMAPolicy support - Local policy w/o mask"
+    writePID1NUMAPolicy "local"
+    pid1ReloadWithStrace
+    # Kernel requires that nodemask argument is set to NULL when setting default policy
+    # The unpatched versions of strace don't recognize the MPOL_LOCAL constant and
+    # return a numerical constant instead (with a comment):
+    #   set_mempolicy(0x4 /* MPOL_??? */, NULL, 0) = 0
+    # Let's cover this scenario as well
+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+    echo "PID1 NUMAPolicy support - Local policy w/ mask"
+    writePID1NUMAPolicy "local" "0"
+    pid1ReloadWithStrace
+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Default policy w/o mask"
+    writeTestUnitNUMAPolicy "default"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "default"
+    pid1StopUnit "$testUnit"
+    grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Default policy w/ mask"
+    writeTestUnitNUMAPolicy "default" "0"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "default" "0"
+    pid1StopUnit $testUnit
+    # Mask must be ignored
+    grep "set_mempolicy(MPOL_DEFAULT, NULL" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Bind policy w/o mask"
+    writeTestUnitNUMAPolicy "bind"
+    pid1StartUnitWithJournal "$testUnit"
+    pid1StopUnit "$testUnit"
+    [[ $(systemctl show "$testUnit" -P ExecMainStatus) == "242" ]]
+
+    echo "Unit file NUMAPolicy support - Bind policy w/ mask"
+    writeTestUnitNUMAPolicy "bind" "0"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "bind" "0"
+    pid1StopUnit "$testUnit"
+    grep -P "set_mempolicy\(MPOL_BIND, \[0x0*1\]" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Interleave policy w/o mask"
+    writeTestUnitNUMAPolicy "interleave"
+    pid1StartUnitWithStrace "$testUnit"
+    pid1StopUnit "$testUnit"
+    [[ $(systemctl show "$testUnit" -P ExecMainStatus) == "242" ]]
+
+    echo "Unit file NUMAPolicy support - Interleave policy w/ mask"
+    writeTestUnitNUMAPolicy "interleave" "0"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "interleave" "0"
+    pid1StopUnit "$testUnit"
+    grep -P "set_mempolicy\(MPOL_INTERLEAVE, \[0x0*1\]" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Preferred policy w/o mask"
+    writeTestUnitNUMAPolicy "preferred"
+    pid1StartUnitWithJournal "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "preferred"
+    pid1StopUnit "$testUnit"
+    [[ $(systemctl show "$testUnit" -P ExecMainStatus) == "242" ]] && { echo >&2 "unexpected pass"; exit 1; }
+
+    echo "Unit file NUMAPolicy support - Preferred policy w/ mask"
+    writeTestUnitNUMAPolicy "preferred" "0"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "preferred" "0"
+    pid1StopUnit "$testUnit"
+    grep -P "set_mempolicy\(MPOL_PREFERRED, \[0x0*1\]" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Local policy w/o mask"
+    writeTestUnitNUMAPolicy "local"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "local"
+    pid1StopUnit "$testUnit"
+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+    echo "Unit file NUMAPolicy support - Local policy w/ mask"
+    writeTestUnitNUMAPolicy "local" "0"
+    pid1StartUnitWithStrace "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "local" "0"
+    pid1StopUnit "$testUnit"
+    # Mask must be ignored
+    grep -E "set_mempolicy\((MPOL_LOCAL|0x4 [^,]*), NULL" "$straceLog"
+
+    echo "Unit file CPUAffinity=NUMA support"
+    writeTestUnitNUMAPolicy "bind" "0"
+    echo "CPUAffinity=numa" >>"$testUnitNUMAConf"
+    systemctl daemon-reload
+    systemctl start "$testUnit"
+    systemctlCheckNUMAProperties "$testUnit" "bind" "0"
+    cpulist="$(cat /sys/devices/system/node/node0/cpulist)"
+    affinity_systemd="$(systemctl show --value -p CPUAffinity "$testUnit")"
+    [ "$cpulist" = "$affinity_systemd" ]
+    pid1StopUnit "$testUnit"
+
+    echo "systemd-run NUMAPolicy support"
+    runUnit='numa-systemd-run-test.service'
+
+    systemd-run -p NUMAPolicy=default --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "default"
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=default -p NUMAMask=0 --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "default" ""
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=bind -p NUMAMask=0 --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "bind" "0"
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=interleave -p NUMAMask=0 --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "interleave" "0"
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=preferred -p NUMAMask=0 --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "preferred" "0"
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=local --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "local"
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=local -p NUMAMask=0 --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "local" ""
+    pid1StopUnit "$runUnit"
+
+    systemd-run -p NUMAPolicy=local -p NUMAMask=0 -p CPUAffinity=numa --unit "$runUnit" sleep 1000
+    systemctlCheckNUMAProperties "$runUnit" "local" ""
+    systemctl cat "$runUnit" | grep -q 'CPUAffinity=numa'
+    pid1StopUnit "$runUnit"
+fi
+
+# Cleanup
+rm -rf "$confDir"
+systemctl daemon-reload
+
+systemd-analyze log-level info
+
+echo OK >/testok
+
+exit 0