summaryrefslogtreecommitdiffstats
path: root/docs/UIDS-GIDS.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/UIDS-GIDS.md')
-rw-r--r--docs/UIDS-GIDS.md326
1 files changed, 326 insertions, 0 deletions
diff --git a/docs/UIDS-GIDS.md b/docs/UIDS-GIDS.md
new file mode 100644
index 0000000..db4cac4
--- /dev/null
+++ b/docs/UIDS-GIDS.md
@@ -0,0 +1,326 @@
+---
+title: Users, Groups, UIDs and GIDs on systemd Systems
+category: Users, Groups and Home Directories
+layout: default
+SPDX-License-Identifier: LGPL-2.1-or-later
+---
+
+# Users, Groups, UIDs and GIDs on systemd Systems
+
+Here's a summary of the requirements `systemd` (and Linux) make on UID/GID
+assignments and their ranges.
+
+Note that while in theory UIDs and GIDs are orthogonal concepts they really
+aren't IRL. With that in mind, when we discuss UIDs below it should be assumed
+that whatever we say about UIDs applies to GIDs in mostly the same way, and all
+the special assignments and ranges for UIDs always have mostly the same
+validity for GIDs too.
+
+## Special Linux UIDs
+
+In theory, the range of the C type `uid_t` is 32bit wide on Linux,
+i.e. 0…4294967295. However, four UIDs are special on Linux:
+
+1. 0 → The `root` super-user
+
+2. 65534 → The `nobody` UID, also called the "overflow" UID or similar. It's
+ where various subsystems map unmappable users to, for example file systems
+ only supporting 16bit UIDs, NFS or user namespacing. (The latter can be
+ changed with a sysctl during runtime, but that's not supported on
+ `systemd`. If you do change it you void your warranty.) Because Fedora is a
+ bit confused the `nobody` user is called `nfsnobody` there (and they have a
+ different `nobody` user at UID 99). I hope this will be corrected eventually
+ though. (Also, some distributions call the `nobody` group `nogroup`. I wish
+ they didn't.)
+
+3. 4294967295, aka "32bit `(uid_t) -1`" → This UID is not a valid user ID, as
+ `setresuid()`, `chown()` and friends treat -1 as a special request to not
+ change the UID of the process/file. This UID is hence not available for
+ assignment to users in the user database.
+
+4. 65535, aka "16bit `(uid_t) -1`" → Before Linux kernel 2.4 `uid_t` used to be
+ 16bit, and programs compiled for that would hence assume that `(uid_t) -1`
+ is 65535. This UID is hence not usable either.
+
+The `nss-systemd` glibc NSS module will synthesize user database records for
+the UIDs 0 and 65534 if the system user database doesn't list them. This means
+that any system where this module is enabled works to some minimal level
+without `/etc/passwd`.
+
+## Special Distribution UID ranges
+
+Distributions generally split the available UID range in two:
+
+1. 1…999 → System users. These are users that do not map to actual "human"
+ users, but are used as security identities for system daemons, to implement
+ privilege separation and run system daemons with minimal privileges.
+
+2. 1000…65533 and 65536…4294967294 → Everything else, i.e. regular (human) users.
+
+Note that most distributions allow changing the boundary between system and
+regular users, even during runtime as user configuration. Moreover, some older
+systems placed the boundary at 499/500, or even 99/100. In `systemd`, the
+boundary is configurable only during compilation time, as this should be a
+decision for distribution builders, not for users. Moreover, we strongly
+discourage downstreams to change the boundary from the upstream default of
+999/1000.
+
+Also note that programs such as `adduser` tend to allocate from a subset of the
+available regular user range only, usually 1000..60000. And it's also usually
+user-configurable, too.
+
+Note that systemd requires that system users and groups are resolvable without
+networking available — a requirement that is not made for regular users. This
+means regular users may be stored in remote LDAP or NIS databases, but system
+users may not (except when there's a consistent local cache kept, that is
+available during earliest boot, including in the initrd).
+
+## Special `systemd` GIDs
+
+`systemd` defines no special UIDs beyond what Linux already defines (see
+above). However, it does define some special group/GID assignments, which are
+primarily used for `systemd-udevd`'s device management. The precise list of the
+currently defined groups is found in this `sysusers.d` snippet:
+[basic.conf](https://raw.githubusercontent.com/systemd/systemd/main/sysusers.d/basic.conf.in)
+
+It's strongly recommended that downstream distributions include these groups in
+their default group databases.
+
+Note that the actual GID numbers assigned to these groups do not have to be
+constant beyond a specific system. There's one exception however: the `tty`
+group must have the GID 5. That's because it must be encoded in the `devpts`
+mount parameters during earliest boot, at a time where NSS lookups are not
+possible. (Note that the actual GID can be changed during `systemd` build time,
+but downstreams are strongly advised against doing that.)
+
+## Special `systemd` UID ranges
+
+`systemd` defines a number of special UID ranges:
+
+1. 60001…60513 → UIDs for home directories managed by
+ [`systemd-homed.service(8)`](https://www.freedesktop.org/software/systemd/man/systemd-homed.service.html). UIDs
+ from this range are automatically assigned to any home directory discovered,
+ and persisted locally on first login. On different systems the same user
+ might get different UIDs assigned in case of conflict, though it is
+ attempted to make UID assignments stable, by deriving them from a hash of
+ the user name.
+
+2. 61184…65519 → UIDs for dynamic users are allocated from this range (see the
+ `DynamicUser=` documentation in
+ [`systemd.exec(5)`](https://www.freedesktop.org/software/systemd/man/systemd.exec.html)). This
+ range has been chosen so that it is below the 16bit boundary (i.e. below
+ 65535), in order to provide compatibility with container environments that
+ assign a 64K range of UIDs to containers using user namespacing. This range
+ is above the 60000 boundary, so that its allocations are unlikely to be
+ affected by `adduser` allocations (see above). And we leave some room
+ upwards for other purposes. (And if you wonder why precisely these numbers:
+ if you write them in hexadecimal, they might make more sense: 0xEF00 and
+ 0xFFEF). The `nss-systemd` module will synthesize user records implicitly
+ for all currently allocated dynamic users from this range. Thus, NSS-based
+ user record resolving works correctly without those users being in
+ `/etc/passwd`.
+
+3. 524288…1879048191 → UID range for `systemd-nspawn`'s automatic allocation of
+ per-container UID ranges. When the `--private-users=pick` switch is used (or
+ `-U`) then it will automatically find a so far unused 16bit subrange of this
+ range and assign it to the container. The range is picked so that the upper
+ 16bit of the 32bit UIDs are constant for all users of the container, while
+ the lower 16bit directly encode the 65536 UIDs assigned to the
+ container. This mode of allocation means that the upper 16bit of any UID
+ assigned to a container are kind of a "container ID", while the lower 16bit
+ directly expose the container's own UID numbers. If you wonder why precisely
+ these numbers, consider them in hexadecimal: 0x00080000…0x6FFFFFFF. This
+ range is above the 16bit boundary. Moreover it's below the 31bit boundary,
+ as some broken code (specifically: the kernel's `devpts` file system)
+ erroneously considers UIDs signed integers, and hence can't deal with values
+ above 2^31. The `systemd-machined.service` service will synthesize user
+ database records for all UIDs assigned to a running container from this
+ range.
+
+Note for both allocation ranges: when an UID allocation takes place NSS is
+checked for collisions first, and a different UID is picked if an entry is
+found. Thus, the user database is used as synchronization mechanism to ensure
+exclusive ownership of UIDs and UID ranges. To ensure compatibility with other
+subsystems allocating from the same ranges it is hence essential that they
+ensure that whatever they pick shows up in the user/group databases, either by
+providing an NSS module, or by adding entries directly to `/etc/passwd` and
+`/etc/group`. For performance reasons, do note that `systemd-nspawn` will only
+do an NSS check for the first UID of the range it allocates, not all 65536 of
+them. Also note that while the allocation logic is operating, the glibc
+`lckpwdf()` user database lock is taken, in order to make this logic race-free.
+
+## Figuring out the system's UID boundaries
+
+The most important boundaries of the local system may be queried with
+`pkg-config`:
+
+```
+$ pkg-config --variable=systemuidmax systemd
+999
+$ pkg-config --variable=dynamicuidmin systemd
+61184
+$ pkg-config --variable=dynamicuidmax systemd
+65519
+$ pkg-config --variable=containeruidbasemin systemd
+524288
+$ pkg-config --variable=containeruidbasemax systemd
+1878982656
+```
+
+(Note that the latter encodes the maximum UID *base* `systemd-nspawn` might
+pick — given that 64K UIDs are assigned to each container according to this
+allocation logic, the maximum UID used for this range is hence
+1878982656+65535=1879048191.)
+
+Systemd has compile-time default for these boundaries. Using those defaults is
+recommended. It will nevertheless query `/etc/login.defs` at runtime, when
+compiled with `-Dcompat-mutable-uid-boundaries=true` and that file is present.
+Support for this is considered only a compatibility feature and should not be
+used except when upgrading systems which were created with different defaults.
+
+## Considerations for container managers
+
+If you hack on a container manager, and wonder how and how many UIDs best to
+assign to your containers, here are a few recommendations:
+
+1. Definitely, don't assign less than 65536 UIDs/GIDs. After all the `nobody`
+user has magic properties, and hence should be available in your container, and
+given that it's assigned the UID 65534, you should really cover the full 16bit
+range in your container. Note that systemd will — as mentioned — synthesize
+user records for the `nobody` user, and assumes its availability in various
+other parts of its codebase, too, hence assigning fewer users means you lose
+compatibility with running systemd code inside your container. And most likely
+other packages make similar restrictions.
+
+2. While it's fine to assign more than 65536 UIDs/GIDs to a container, there's
+most likely not much value in doing so, as Linux distributions won't use the
+higher ranges by default (as mentioned neither `adduser` nor `systemd`'s
+dynamic user concept allocate from above the 16bit range). Unless you actively
+care for nested containers, it's hence probably a good idea to allocate exactly
+65536 UIDs per container, and neither less nor more. A pretty side-effect is
+that by doing so, you expose the same number of UIDs per container as Linux 2.2
+supported for the whole system, back in the days.
+
+3. Consider allocating UID ranges for containers so that the first UID you
+assign has the lower 16bits all set to zero. That way, the upper 16bits become
+a container ID of some kind, while the lower 16bits directly encode the
+internal container UID. This is the way `systemd-nspawn` allocates UID ranges
+(see above). Following this allocation logic ensures best compatibility with
+`systemd-nspawn` and all other container managers following the scheme, as it
+is sufficient then to check NSS for the first UID you pick regarding conflicts,
+as that's what they do, too. Moreover, it makes `chown()`ing container file
+system trees nicely robust to interruptions: as the external UID encodes the
+internal UID in a fixed way, it's very easy to adjust the container's base UID
+without the need to know the original base UID: to change the container base,
+just mask away the upper 16bit, and insert the upper 16bit of the new container
+base instead. Here are the easy conversions to derive the internal UID, the
+external UID, and the container base UID from each other:
+
+ ```
+ INTERNAL_UID = EXTERNAL_UID & 0x0000FFFF
+ CONTAINER_BASE_UID = EXTERNAL_UID & 0xFFFF0000
+ EXTERNAL_UID = INTERNAL_UID | CONTAINER_BASE_UID
+ ```
+
+4. When picking a UID range for containers, make sure to check NSS first, with
+a simple `getpwuid()` call: if there's already a user record for the first UID
+you want to pick, then it's already in use: pick a different one. Wrap that
+call in a `lckpwdf()` + `ulckpwdf()` pair, to make allocation
+race-free. Provide an NSS module that makes all UIDs you end up taking show up
+in the user database, and make sure that the NSS module returns up-to-date
+information before you release the lock, so that other system components can
+safely use the NSS user database as allocation check, too. Note that if you
+follow this scheme no changes to `/etc/passwd` need to be made, thus minimizing
+the artifacts the container manager persistently leaves in the system.
+
+5. `systemd-homed` by default mounts the home directories it manages with UID
+mapping applied. It will map four UID ranges into that uidmap, and leave
+everything else unmapped: the range from 0…60000, the user's own UID, the range
+60514…65534, and the container range 524288…1879048191. This means
+files/directories in home directories managed by `systemd-homed` cannot be
+owned by UIDs/GIDs outside of these four ranges (attempts to `chown()` files to
+UIDs outside of these ranges will fail). Thus, if container trees are to be
+placed within a home directory managed by `systemd-homed` they should take
+these ranges into consideration and either place the trees at base UID 0 (and
+then map them to a higher UID range for use in user namespacing via another
+level of UID mapped mounts, at *runtime*) or at a base UID from the container
+UID range. That said, placing container trees (and in fact any
+files/directories not owned by the home directory's user) in home directories
+is generally a questionable idea (regardless of whether `systemd-homed` is used
+or not), given this typically breaks quota assumptions, makes it impossible for
+users to properly manage all files in their own home directory due to
+permission problems, introduces security issues around SETUID and severely
+restricts compatibility with networked home directories. Typically, it's a much
+better idea to place container images outside of the home directory,
+i.e. somewhere below `/var/` or similar.
+
+## Summary
+
+| UID/GID | Purpose | Defined By | Listed in |
+|-----------------------|-----------------------|---------------|-------------------------------|
+| 0 | `root` user | Linux | `/etc/passwd` + `nss-systemd` |
+| 1…4 | System users | Distributions | `/etc/passwd` |
+| 5 | `tty` group | `systemd` | `/etc/passwd` |
+| 6…999 | System users | Distributions | `/etc/passwd` |
+| 1000…60000 | Regular users | Distributions | `/etc/passwd` + LDAP/NIS/… |
+| 60001…60513 | Human users (homed) | `systemd` | `nss-systemd` |
+| 60514…60577 | Host users mapped into containers | `systemd` | `systemd-nspawn` |
+| 60578…61183 | Unused | | |
+| 61184…65519 | Dynamic service users | `systemd` | `nss-systemd` |
+| 65520…65533 | Unused | | |
+| 65534 | `nobody` user | Linux | `/etc/passwd` + `nss-systemd` |
+| 65535 | 16bit `(uid_t) -1` | Linux | |
+| 65536…524287 | Unused | | |
+| 524288…1879048191 | Container UID ranges | `systemd` | `nss-systemd` |
+| 1879048192…2147483647 | Unused | | |
+| 2147483648…4294967294 | HIC SVNT LEONES | | |
+| 4294967295 | 32bit `(uid_t) -1` | Linux | |
+
+Note that "Unused" in the table above doesn't mean that these ranges are
+really unused. It just means that these ranges have no well-established
+pre-defined purposes between Linux, generic low-level distributions and
+`systemd`. There might very well be other packages that allocate from these
+ranges.
+
+Note that the range 2147483648…4294967294 (i.e. 2^31…2^32-2) should be handled
+with care. Various programs (including kernel file systems — see `devpts` — or
+even kernel syscalls – see `setfsuid()`) have trouble with UIDs outside of the
+signed 32bit range, i.e any UIDs equal to or above 2147483648. It is thus
+strongly recommended to stay away from this range in order to avoid
+complications. This range should be considered reserved for future, special
+purposes.
+
+## Notes on resolvability of user and group names
+
+User names, UIDs, group names and GIDs don't have to be resolvable using NSS
+(i.e. getpwuid() and getpwnam() and friends) all the time. However, systemd
+makes the following requirements:
+
+System users generally have to be resolvable during early boot already. This
+means they should not be provided by any networked service (as those usually
+become available during late boot only), except if a local cache is kept that
+makes them available during early boot too (i.e. before networking is
+up). Specifically, system users need to be resolvable at least before
+`systemd-udevd.service` and `systemd-tmpfiles-setup.service` are started, as both
+need to resolve system users — but note that there might be more services
+requiring full resolvability of system users than just these two.
+
+Regular users do not need to be resolvable during early boot, it is sufficient
+if they become resolvable during late boot. Specifically, regular users need to
+be resolvable at the point in time the `nss-user-lookup.target` unit is
+reached. This target unit is generally used as synchronization point between
+providers of the user database and consumers of it. Services that require that
+the user database is fully available (for example, the login service
+`systemd-logind.service`) are ordered *after* it, while services that provide
+parts of the user database (for example an LDAP user database client) are
+ordered *before* it. Note that `nss-user-lookup.target` is a *passive* unit: in
+order to minimize synchronization points on systems that don't need it the unit
+is pulled into the initial transaction only if there's at least one service
+that really needs it, and that means only if there's a service providing the
+local user database somehow through IPC or suchlike. Or in other words: if you
+hack on some networked user database project, then make sure you order your
+service `Before=nss-user-lookup.target` and that you pull it in with
+`Wants=nss-user-lookup.target`. However, if you hack on some project that needs
+the user database to be up in full, then order your service
+`After=nss-user-lookup.target`, but do *not* pull it in via a `Wants=`
+dependency.