diff options
Diffstat (limited to 'man/org.freedesktop.import1.xml')
| -rw-r--r-- | man/org.freedesktop.import1.xml | 343 |
1 files changed, 343 insertions, 0 deletions
diff --git a/man/org.freedesktop.import1.xml b/man/org.freedesktop.import1.xml new file mode 100644 index 0000000..62d753e --- /dev/null +++ b/man/org.freedesktop.import1.xml @@ -0,0 +1,343 @@ +<?xml version='1.0'?> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" > +<!-- SPDX-License-Identifier: LGPL-2.1-or-later --> + +<refentry id="org.freedesktop.import1" conditional='ENABLE_IMPORTD' + xmlns:xi="http://www.w3.org/2001/XInclude"> + <refentryinfo> + <title>org.freedesktop.import1</title> + <productname>systemd</productname> + </refentryinfo> + + <refmeta> + <refentrytitle>org.freedesktop.import1</refentrytitle> + <manvolnum>5</manvolnum> + </refmeta> + + <refnamediv> + <refname>org.freedesktop.import1</refname> + <refpurpose>The D-Bus interface of systemd-importd</refpurpose> + </refnamediv> + + <refsect1> + <title>Introduction</title> + + <para> + <citerefentry><refentrytitle>systemd-importd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> + is a system service which may be used to import, export and download additional system images. These + images can be used by tools such as + <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> + to run local containers. The service is used as the backend for <command>machinectl pull-raw</command>, + <command>machinectl pull-tar</command> and related commands. This page describes the D-Bus interface. + </para> + + <para>Note that + <citerefentry><refentrytitle>systemd-importd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> + is mostly a small companion service for + <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. + Many operations to manipulate local container and VM images are hence available via the <command>systemd-machined</command> D-Bus API, c.f. + <citerefentry><refentrytitle>org.freedesktop.machine1</refentrytitle><manvolnum>5</manvolnum></citerefentry>. + </para> + </refsect1> + + <refsect1> + <title>The Manager Object</title> + + <para>The service exposes the following interfaces on the Manager object on the bus:</para> + + <programlisting executable="systemd-importd" node="/org/freedesktop/import1" interface="org.freedesktop.import1.Manager"> +node /org/freedesktop/import1 { + interface org.freedesktop.import1.Manager { + methods: + ImportTar(in h fd, + in s local_name, + in b force, + in b read_only, + out u transfer_id, + out o transfer_path); + ImportRaw(in h fd, + in s local_name, + in b force, + in b read_only, + out u transfer_id, + out o transfer_path); + ImportFileSystem(in h fd, + in s local_name, + in b force, + in b read_only, + out u transfer_id, + out o transfer_path); + ExportTar(in s local_name, + in h fd, + in s format, + out u transfer_id, + out o transfer_path); + ExportRaw(in s local_name, + in h fd, + in s format, + out u transfer_id, + out o transfer_path); + PullTar(in s url, + in s local_name, + in s verify_mode, + in b force, + out u transfer_id, + out o transfer_path); + PullRaw(in s url, + in s local_name, + in s verify_mode, + in b force, + out u transfer_id, + out o transfer_path); + ListTransfers(out a(usssdo) transfers); + CancelTransfer(in u transfer_id); + signals: + TransferNew(u transfer_id, + o transfer_path); + TransferRemoved(u transfer_id, + o transfer_path, + s result); + }; + interface org.freedesktop.DBus.Peer { ... }; + interface org.freedesktop.DBus.Introspectable { ... }; + interface org.freedesktop.DBus.Properties { ... }; +}; + </programlisting> + + <!--method ImportFileSystem is not documented!--> + + <!--Autogenerated cross-references for systemd.directives, do not edit--> + + <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Manager"/> + + <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Manager"/> + + <variablelist class="dbus-method" generated="True" extra-ref="ImportTar()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="ImportRaw()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="ImportFileSystem()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="ExportTar()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="ExportRaw()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="PullTar()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="PullRaw()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="ListTransfers()"/> + + <variablelist class="dbus-method" generated="True" extra-ref="CancelTransfer()"/> + + <variablelist class="dbus-signal" generated="True" extra-ref="TransferNew"/> + + <variablelist class="dbus-signal" generated="True" extra-ref="TransferRemoved"/> + + <!--End of Autogenerated section--> + + <refsect2> + <title>Methods</title> + + <para><function>ImportTar()</function> and <function>ImportRaw()</function> import a system image and + place it into <filename>/var/lib/machines/</filename>. The first argument should be a file descriptor + (opened for reading) referring to the tar or raw file to import. It should reference a file on disk, + a pipe or a socket. When <function>ImportTar()</function> is used the file descriptor should + refer to a tar file, optionally compressed with + <citerefentry project="die-net"><refentrytitle>gzip</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry project="die-net"><refentrytitle>bzip2</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + or + <citerefentry project="die-net"><refentrytitle>xz</refentrytitle><manvolnum>1</manvolnum></citerefentry>. + <command>systemd-importd</command> will detect the used compression scheme (if any) automatically. When + <function>ImportRaw()</function> is used the file descriptor should refer to a raw or qcow2 disk image + containing an MBR or GPT disk label, also optionally compressed with gzip, bzip2 or xz. In either case, + if the file is specified as a file descriptor on disk, progress information is generated for the import + operation (as in that case we know the total size on disk). If a socket or pipe is specified, progress information is not + available. The file descriptor argument is followed by a local name for the image. This should be a + name suitable as a hostname and will be used to name the imported image below + <filename>/var/lib/machines/</filename>. A tar import is placed as a directory tree or a + <citerefentry project="man-pages"><refentrytitle>btrfs</refentrytitle><manvolnum>8</manvolnum></citerefentry> + subvolume below <filename>/var/lib/machines/</filename> under the specified name with no suffix + appended. A raw import is placed as a file in <filename>/var/lib/machines/</filename> with the + <filename>.raw</filename> suffix appended. If the <option>force</option> argument is true, any + pre-existing image with the same name is removed before starting the operation. Otherwise, the + operation fails if an image with the same name already exists. Finally, the + <option>read_only</option> argument controls + whether to create a writable or read-only image. Both methods return immediately after starting the import, + with the import transfer ongoing. They return a pair of transfer identifier and object path, which may + be used to retrieve progress information about the transfer or to cancel it. The transfer identifier is a + simple numeric identifier, the object path references an + <interfacename>org.freedesktop.import1.Transfer</interfacename> object, see below. Listen for a + <function>TransferRemoved</function> signal for the transfer ID in order to detect when a transfer is + complete. The returned transfer object is useful to determine the current progress or log output of the + ongoing import operation.</para> + + <para><function>ExportTar()</function> and <function>ExportRaw()</function> implement the reverse + operation, and may be used to export a system image in order to place it in a tar or raw image. They + take the machine name to export as their first parameter, followed by a file descriptor (opened for writing) + where the tar or raw file will be written. It may either reference a file on disk or a pipe/socket. The + third argument specifies in which compression format to write the image. It takes one of + <literal>uncompressed</literal>, <literal>xz</literal>, <literal>bzip2</literal> or + <literal>gzip</literal>, depending on which compression scheme is required. The image written to the + specified file descriptor will be a tar file in case of <function>ExportTar()</function> or a raw disk + image in case of <function>ExportRaw()</function>. Note that currently raw disk images may not be + exported as tar files, and vice versa. This restriction might be lifted eventually. The method + returns a transfer identifier and object path for cancelling or tracking the export operation, similarly + to <function>ImportTar()</function> or <function>ImportRaw()</function> as described above.</para> + + <para><function>PullTar()</function> and <function>PullRaw()</function> may be used to download, verify + and import a system image from a URL. They take an URL argument which should point to a tar or + raw file on the <literal>http://</literal> or <literal>https://</literal> protocols, possibly + compressed with xz, bzip2 or gzip. The second argument is a local name for the image. It should be + suitable as a hostname, similarly to the matching argument of the <function>ImportTar()</function> and + <function>ImportRaw()</function> methods above. The third argument indicates the verification mode for + the image. It may be one of <literal>no</literal>, <literal>checksum</literal>, + <literal>signature</literal>. <literal>no</literal> turns off any kind of verification of the image; + <literal>checksum</literal> looks for a <filename>SHA256SUM</filename> file next to the downloaded + image and verifies any SHA256 hash value in that file against the image; <literal>signature</literal> + does the same but also tries to authenticate the <filename>SHA256SUM</filename> file via + <citerefentry project="man-pages"><refentrytitle>gpg</refentrytitle><manvolnum>8</manvolnum></citerefentry> + first. The last argument indicates whether to replace a possibly pre-existing image with the same local + name (if <literal>true</literal>), or whether to fail (if <literal>false</literal>). Like the import + and export calls above, these calls return a pair of transfer identifier and object path for the ongoing + download.</para> + + <para><function>ListTransfers()</function> returns a list of ongoing import, export or download + operations as created with the six calls described above. It returns an array of structures which + consist of the numeric transfer identifier, a string indicating the operation (one of + <literal>import-tar</literal>, <literal>import-raw</literal>, <literal>export-tar</literal>, + <literal>export-raw</literal>, <literal>pull-tar</literal> or <literal>pull-raw</literal>), a string + describing the remote file (in case of download operations this is the source URL, in case of + import/export operations this is a short string describing the file descriptor passed in), a string + with the local machine image name, a progress value between 0.0 (for 0%) and 1.0 (for 100%), as well as + the transfer object path.</para> + + <para><function>CancelTransfer()</function> may be used to cancel an ongoing import, export or download + operation. Simply specify the transfer identifier to cancel the ongoing operation.</para> + </refsect2> + + <refsect2> + <title>Signals</title> + + <para>The <function>TransferNew</function> signal is generated each time a new transfer is started with + the import, export or download calls described above. It carries the transfer ID and object path that + have just been created.</para> + + <para>The <function>TransferRemoved</function> signal is sent each time a transfer finishes, + is canceled or fails. It also carries the transfer ID and object path, followed by a string indicating + the result of the operation, which is one of <literal>done</literal> (on success), + <literal>canceled</literal> or <literal>failed</literal>.</para> + </refsect2> + </refsect1> + + <refsect1> + <title>The Transfer Object</title> + + <programlisting executable="systemd-importd" node="/org/freedesktop/import1/transfer/_1" interface="org.freedesktop.import1.Transfer"> +node /org/freedesktop/import1/transfer/_1 { + interface org.freedesktop.import1.Transfer { + methods: + Cancel(); + signals: + LogMessage(u priority, + s line); + properties: + @org.freedesktop.DBus.Property.EmitsChangedSignal("const") + readonly u Id = ...; + @org.freedesktop.DBus.Property.EmitsChangedSignal("const") + readonly s Local = '...'; + @org.freedesktop.DBus.Property.EmitsChangedSignal("const") + readonly s Remote = '...'; + @org.freedesktop.DBus.Property.EmitsChangedSignal("const") + readonly s Type = '...'; + @org.freedesktop.DBus.Property.EmitsChangedSignal("const") + readonly s Verify = '...'; + @org.freedesktop.DBus.Property.EmitsChangedSignal("false") + readonly d Progress = ...; + }; + interface org.freedesktop.DBus.Peer { ... }; + interface org.freedesktop.DBus.Introspectable { ... }; + interface org.freedesktop.DBus.Properties { ... }; +}; + </programlisting> + + <!--signal LogMessage is not documented!--> + + <!--Autogenerated cross-references for systemd.directives, do not edit--> + + <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Transfer"/> + + <variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Transfer"/> + + <variablelist class="dbus-method" generated="True" extra-ref="Cancel()"/> + + <variablelist class="dbus-signal" generated="True" extra-ref="LogMessage"/> + + <variablelist class="dbus-property" generated="True" extra-ref="Id"/> + + <variablelist class="dbus-property" generated="True" extra-ref="Local"/> + + <variablelist class="dbus-property" generated="True" extra-ref="Remote"/> + + <variablelist class="dbus-property" generated="True" extra-ref="Type"/> + + <variablelist class="dbus-property" generated="True" extra-ref="Verify"/> + + <variablelist class="dbus-property" generated="True" extra-ref="Progress"/> + + <!--End of Autogenerated section--> + + <refsect2> + <title>Methods</title> + + <para>The <function>Cancel()</function> method may be used to cancel the transfer. It takes no + parameters. This method is pretty much equivalent to the <function>CancelTransfer()</function> method + on the <structname>Manager</structname> interface (see above), but is exposed on the + <structname>Transfer</structname> object itself instead of taking a transfer ID.</para> + </refsect2> + + <refsect2> + <title>Properties</title> + + <para>The <varname>Id</varname> property exposes the numeric transfer ID of the transfer object.</para> + + <para>The <varname>Local</varname>, <varname>Remote</varname> and <varname>Type</varname> properties + expose the local container name of this transfer, the remote source (in case of download: the URL, in + case of import/export: a string describing the file descriptor passed in), and the type of operation + (see the Manager's <function>ListTransfer()</function> method above for an explanation of the possible + values).</para> + + <para>The <varname>Verify</varname> property exposes the selected verification setting and is only + defined for download operations (see above).</para> + + <para>The <varname>Progress</varname> property exposes the current progress of the transfer as a value + between 0.0 and 1.0. To show a progress bar on screen we recommend to query this value in regular + intervals, for example every 500 ms or so.</para> + </refsect2> + </refsect1> + + <refsect1> + <title>Examples</title> + + <example> + <title>Introspect <interfacename>org.freedesktop.import1.Manager</interfacename> on the bus</title> + + <programlisting>$ gdbus introspect --system \ + --dest org.freedesktop.import1 \ + --object-path /org/freedesktop/import1 + </programlisting> + </example> + + <example> + <title>Introspect <interfacename>org.freedesktop.import1.Transfer</interfacename> on the bus</title> + + <programlisting>$ gdbus introspect --system \ + --dest org.freedesktop.import1 \ + --object-path /org/freedesktop/import1/transfer/_1 + </programlisting> + </example> + </refsect1> + + <xi:include href="org.freedesktop.locale1.xml" xpointer="versioning"/> +</refentry> |