Adding upstream version 1:115.7.0.upstream/1%115.7.0upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 158 insertions, 0 deletions

diff --git a/netwerk/docs/dns/dns-over-https-trr.md b/netwerk/docs/dns/dns-over-https-trr.md
new file mode 100644
index 0000000000..dc48edc967
--- /dev/null
+++ b/netwerk/docs/dns/dns-over-https-trr.md
@@ -0,0 +1,158 @@
+---
+title: DNS over HTTPS (Trusted Recursive Resolver)
+---
+
+## Terminology
+
+**DNS-over-HTTPS (DoH)** allows DNS to be resolved with enhanced
+privacy, secure transfers and comparable performance. The protocol is
+described in [RFC 8484](https://tools.ietf.org/html/rfc8484) .
+
+**Trusted Recursive Resolver (TRR)** is the name of Firefox\'s
+implementation of the protocol and the
+[policy](https://wiki.mozilla.org/Security/DOH-resolver-policy) that
+ensures only privacy-respecting DoH providers are recommended by
+Firefox.
+
+On this page we will use DoH when referring to the protocol, and TRR
+when referring to the implementation.
+
+**Unencrypted DNS (Do53)** is the regular way most programs resolve DNS
+names. This is usually done by the operating system by sending an
+unencrypted packet to the DNS server that normally listens on port 53.
+
+## DoH Rollout
+
+**DoH Rollout** refers to the frontend code that decides whether TRR
+will be enabled automatically for users in the [rollout
+population](https://support.mozilla.org/kb/firefox-dns-over-https#w_about-the-us-rollout-of-dns-over-https).
+
+The functioning of this module is described
+[here](https://wiki.mozilla.org/Security/DNS_Over_HTTPS).
+
+The code lives in
+[browser/components/doh](https://searchfox.org/mozilla-central/source/browser/components/doh).
+
+## Implementation
+
+When enabled TRR may work in two modes, TRR-first (2) and TRR-only (3).
+These are controlled by the **network.trr.mode** or **doh-rollout.mode**
+prefs. The difference is that when a DoH request fails in TRR-first
+mode, we then fallback to **Do53**.
+
+For TRR-first mode, we have a strict-fallback setting which can be
+enabled by setting network.trr.strict\_native\_fallback to true. With
+this, while we will still completely skip TRR for certain requests (like
+captive portal detection, bootstrapping the TRR provider, etc.) we will
+only fall back after a TRR failure to **Do53** for three possible
+reasons:
+1. We detected, via Confirmation, that TRR is currently out of
+service on the network. This could mean the provider is down or blocked.
+2. The address successfully resolved via TRR could not be connected to.
+3. TRR result is NXDOMAIN.
+
+When a DNS resolution doesn't use TRR we will normally preserve that data in the form of a _TRRSkippedReason_. A detailed explanation of each one is available [here](trr-skip-reasons).
+
+In other cases, instead of falling back, we will trigger a fresh
+Confirmation (which will start us on a fresh connection to the provider)
+and retry the lookup with TRR again. We only retry once.
+
+DNS name resolutions are performed in _nsHostResolver::ResolveHost_. If a
+cached response for the request could not be found,
+_nsHostResolver::NameLookup_ will trigger either a DoH or a Do53 request.
+First it checks the effective TRR mode of the request is as requests
+could have a different mode from the global one. If the request may use
+TRR, then we dispatch a request in _nsHostResolver::TrrLookup_. Since we
+usually reolve both IPv4 and IPv6 names, a **TRRQuery** object is
+created to perform and combine both responses.
+
+Once done, _nsHostResolver::CompleteLookup_ is called. If the DoH server
+returned a valid response we use it, otherwise we report a failure in
+TRR-only mode, or try Do53 in TRR-first mode.
+
+**TRRService** controls the global state and settings of the feature.
+Each individual request is performed by the **TRR** class.
+
+Since HTTP channels in Firefox normally work on the main thread, TRR
+uses a special implementation called **TRRServiceChannel** to avoid
+congestion on the main thread.
+
+## Dynamic Blocklist
+
+In order to improve performance TRR service manages a dynamic blocklist
+for host names that can\'t be resolved with DoH but work with the native
+resolver. Blocklisted entries will not be retried over DoH for one
+minute (See _network.trr.temp\_blocklist\_duration\_sec_
+pref). When a domain is added to the blocklist, we also check if there
+is an NS record for its parent domain, in which case we add that to the
+blocklist. This feature is controlled by the
+_network.trr.temp\_blocklist_ pref.
+
+## TRR confirmation
+
+TRR requests normally have a 1.5 second timeout. If for some reason we
+do not get a response in that time we fall back to Do53. To avoid this
+delay for all requests when the DoH server is not accessible, we perform
+a confirmation check. If the check fails, we conclude that the server is
+not usable and will use Do53 directly. The confirmation check is retried
+periodically to check if the TRR connection is functional again.
+
+The confirmation state has one of the following values:
+
+-   CONFIRM\_OFF: TRR is turned off, so the service is not active.
+-   CONFIRM\_TRING\_OK: TRR in on, but we are not sure yet if the
+        DoH server is accessible. We optimistically try to resolve via
+        DoH and fall back to Do53 after 1.5 seconds. While in this state
+        the TRRService will be performing NS record requests to the DoH
+        server as a connectivity check. Depending on a successful
+        response it will either transition to the CONFIRM\_OK or
+        CONFIRM\_FAILED state.
+-   CONFIRM\_OK: TRR is on and we have confirmed that the DoH server
+        is behaving adequately. Will use TRR for all requests (and fall
+        back to Do53 in case of timeout, NXDOMAIN, etc).
+-   CONFIRM\_FAILED: TRR is on, but the DoH server is not
+        accessible. Either we have no network connectivity, or the
+        server is down. We don\'t perform DoH requests in this state
+        because they are sure to fail.
+-   CONFIRM\_TRYING\_FAILED: This is equivalent to CONFIRM\_FAILED,
+        but we periodically enter this state when rechecking if the DoH
+        server is accessible.
+-   CONFIRM\_DISABLED: We are in this state if the browser is in
+        TRR-only mode, or if the confirmation was explicitly disabled
+        via pref.
+
+The state machine for the confirmation is defined in the
+_HandleConfirmationEvent_ method in _TRRService.cpp_
+
+If strict fallback mode is enabled, Confirmation will set a flag to
+refresh our connection to the provider.
+
+## Excluded domains
+
+Some domains will never be resolved via TRR. This includes:
+
+-   domains listed in the **network.trr.builtin-excluded-domains** pref
+(normally domains that are equal or end in *localhost* or *local*)
+-   domains listed in the **network.trr.excluded-domains** pref (chosen by the user)
+-   domains that are subdomains of the network\'s DNS suffix
+(for example if the network has the **lan** suffix, domains such as **computer.lan** will not use TRR)
+-   requests made by Firefox to check for the existence of a captive-portal
+-   requests made by Firefox to check the network\'s IPv6 capabilities
+-   domains listed in _/etc/hosts_
+
+## Steering
+
+
+A small set of TRR providers are only available on certain networks.
+Detection is performed in DoHHeuristics.jsm followed by a call to
+_TRRService::SetDetectedURI_. This causes Firefox to use the
+network specific TRR provider until a network change occurs.
+
+## User choice
+
+The TRR feature is designed to prioritize user choice before user agent
+decisions. That means the user may explicitly disable TRR by setting
+**network.trr.mode** to **5** (TRR-disabled), and that
+_doh-rollout_ will not overwrite user settings. Changes to
+the TRR URL or TRR mode by the user will disable heuristics use the user
+configured settings.