Adding upstream version 7.0.6-dfsg.upstream/7.0.6-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 234 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c b/src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c
new file mode 100644
index 00000000..c17a93f7
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/io_timeoutu.c
@@ -0,0 +1,234 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+
+/*
+** name io_timeoutu.c
+** Description: Test socket IO timeouts (user level)
+**
+** Modification History:
+** 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
+**	         The debug mode will print all of the printfs associated with this test.
+**			 The regress mode will be the default mode. Since the regress tool limits
+**           the output to a one line status:PASS or FAIL,all of the printf statements
+**			 have been handled with an if (debug_mode) statement.
+** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to
+**			recognize the return code from tha main program.
+***********************************************************************/
+/***********************************************************************
+** Includes
+***********************************************************************/
+/* Used to get the command line option */
+#include "plgetopt.h"
+
+#include <stdio.h>
+#include "nspr.h"
+
+#define NUM_THREADS 1
+#define BASE_PORT   8000
+#define DEFAULT_ACCEPT_TIMEOUT 2
+
+typedef struct threadInfo {
+    PRInt16 id;
+    PRInt16 accept_timeout;
+    PRLock *dead_lock;
+    PRCondVar *dead_cv;
+    PRInt32   *alive;
+} threadInfo;
+PRIntn failed_already=0;
+PRIntn debug_mode;
+
+void 
+thread_main(void *_info)
+{
+    threadInfo *info = (threadInfo *)_info;
+    PRNetAddr listenAddr;
+    PRNetAddr clientAddr;
+    PRFileDesc *listenSock = NULL;
+    PRFileDesc *clientSock;
+    PRStatus rv;
+ 
+    if (debug_mode) printf("thread %d is alive\n", info->id);
+
+    listenSock = PR_NewTCPSocket();
+    if (!listenSock) {
+        if (debug_mode) printf("unable to create listen socket\n");
+        goto dead;
+    }
+  
+    listenAddr.inet.family = AF_INET;
+    listenAddr.inet.port = PR_htons(BASE_PORT + info->id);
+    listenAddr.inet.ip = PR_htonl(INADDR_ANY);
+    rv = PR_Bind(listenSock, &listenAddr);
+    if (rv == PR_FAILURE) {
+        if (debug_mode) printf("unable to bind\n");
+        goto dead;
+    }
+
+    rv = PR_Listen(listenSock, 4);
+    if (rv == PR_FAILURE) {
+        if (debug_mode) printf("unable to listen\n");
+        goto dead;
+    }
+
+    if (debug_mode) printf("thread %d going into accept for %d seconds\n", 
+        info->id, info->accept_timeout + info->id);
+
+    clientSock = PR_Accept(
+		listenSock, &clientAddr, PR_SecondsToInterval(
+			info->accept_timeout + info->id));
+
+    if (clientSock == NULL) {
+        if (PR_GetError() == PR_IO_TIMEOUT_ERROR) 
+            if (debug_mode) {
+				printf("PR_Accept() timeout worked!\n");
+                printf("TEST FAILED! PR_Accept() returned error %d\n",
+			}
+								   PR_GetError());
+			else failed_already=1;
+    } else {
+        if (debug_mode) printf ("TEST FAILED! PR_Accept() succeeded?\n");
+		else failed_already=1;
+	PR_Close(clientSock);
+    }
+
+dead:
+    if (listenSock) {
+	PR_Close(listenSock);
+    }
+    PR_Lock(info->dead_lock);
+    (*info->alive)--;
+    PR_NotifyCondVar(info->dead_cv);
+    PR_Unlock(info->dead_lock);
+
+    if (debug_mode) printf("thread %d is dead\n", info->id);
+}
+
+void
+thread_test(PRInt32 scope, PRInt32 num_threads)
+{
+    PRInt32 index;
+    PRThread *thr;
+    PRLock *dead_lock;
+    PRCondVar *dead_cv;
+    PRInt32 alive;
+
+    if (debug_mode) printf("IO Timeout test started with %d threads\n", num_threads);
+
+    dead_lock = PR_NewLock();
+    dead_cv = PR_NewCondVar(dead_lock);
+    alive = num_threads;
+    
+    for (index = 0; index < num_threads; index++) {
+        threadInfo *info = (threadInfo *)malloc(sizeof(threadInfo));
+
+        info->id = index;
+        info->dead_lock = dead_lock;
+        info->dead_cv = dead_cv;
+        info->alive = &alive;
+        info->accept_timeout = DEFAULT_ACCEPT_TIMEOUT;
+        
+        thr = PR_CreateThread( PR_USER_THREAD,
+                               thread_main,
+                               (void *)info,
+                               PR_PRIORITY_NORMAL,
+                               scope,
+                               PR_UNJOINABLE_THREAD,
+                               0);
+
+        if (!thr) {
+            PR_Lock(dead_lock);
+            alive--;
+            PR_Unlock(dead_lock);
+        }
+    }
+
+    PR_Lock(dead_lock);
+    while(alive) {
+        if (debug_mode) printf("main loop awake; alive = %d\n", alive);
+        PR_WaitCondVar(dead_cv, PR_INTERVAL_NO_TIMEOUT);
+    }
+    PR_Unlock(dead_lock);
+}
+
+int main(int argc, char **argv)
+{
+    PRInt32 num_threads;
+
+	/* The command line argument: -d is used to determine if the test is being run
+	in debug mode. The regress tool requires only one line output:PASS or FAIL.
+	All of the printfs associated with this test has been handled with a if (debug_mode)
+	test.
+	Usage: test_name -d
+	*/
+	PLOptStatus os;
+	PLOptState *opt = PL_CreateOptState(argc, argv, "d:");
+	while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+    {
+		if (PL_OPT_BAD == os) continue;
+        switch (opt->option)
+        {
+        case 'd':  /* debug mode */
+			debug_mode = 1;
+            break;
+         default:
+            break;
+        }
+    }
+	PL_DestroyOptState(opt);
+
+ /* main test */
+	
+    if (argc > 2)
+        num_threads = atoi(argv[2]);
+    else
+        num_threads = NUM_THREADS;
+
+    PR_Init(PR_USER_THREAD, PR_PRIORITY_LOW, 0);
+    PR_STDIO_INIT();
+
+    if (debug_mode) printf("user level test\n");
+    thread_test(PR_LOCAL_THREAD, num_threads);
+
+     PR_Cleanup();
+     if(failed_already)    
+        return 1;
+     else
+        return 0;
+     
+
+}