Adding upstream version 7.0.6-dfsg.upstream/7.0.6-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 325 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl b/src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl
new file mode 100644
index 00000000..f1d8bce1
--- /dev/null
+++ b/src/libs/xpcom18a4/xpcom/ds/nsISupportsIterators.idl
@@ -0,0 +1,325 @@
+/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is mozilla.org code.
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *   Scott Collins <scc@netscape.com>
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either of the GNU General Public License Version 2 or later (the "GPL"),
+ * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/* nsISupportsIterators.idl --- IDL defining general purpose iterators */
+
+
+#include "nsISupports.idl"
+
+
+  /*
+    ...
+  */
+
+
+  /**
+   * ...
+   */
+[scriptable, uuid(7330650e-1dd2-11b2-a0c2-9ff86ee97bed)]
+interface nsIOutputIterator : nsISupports
+  {
+      /**
+       * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator.
+       * The iterator and the underlying container or sequence cooperate to |Release()|
+       * the replaced element, if any and if necessary, and to |AddRef()| the new element.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @param anElementToPut the element to place into the underlying container or sequence
+       */
+    void putElement( in nsISupports anElementToPut );
+
+      /**
+       * Advance this iterator to the next position in the underlying container or sequence.
+       */
+    void stepForward();
+  };
+
+  /**
+   * ...
+   */
+[scriptable, uuid(85585e12-1dd2-11b2-a930-f6929058269a)]
+interface nsIInputIterator : nsISupports
+  {
+      /**
+       * Retrieve (and |AddRef()|) the element this iterator currently points to.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @result a new reference to the element this iterator currently points to (if any)
+       */
+    nsISupports getElement();
+
+      /**
+       * Advance this iterator to the next position in the underlying container or sequence.
+       */
+    void stepForward();
+
+      /**
+       * Test if |anotherIterator| points to the same position in the underlying container or sequence.
+       *
+       * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence.
+       *
+       * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence
+       * @result true if |anotherIterator| points to the same position in the underlying container or sequence
+       */
+    boolean isEqualTo( in nsISupports anotherIterator );
+
+      /**
+       * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points.
+       * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator.
+       *
+       * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator
+       */
+    nsISupports clone();
+  };
+
+  /**
+   * ...
+   */
+[scriptable, uuid(8da01646-1dd2-11b2-98a7-c7009045be7e)]
+interface nsIForwardIterator : nsISupports
+  {
+      /**
+       * Retrieve (and |AddRef()|) the element this iterator currently points to.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @result a new reference to the element this iterator currently points to (if any)
+       */
+    nsISupports getElement();
+
+      /**
+       * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator.
+       * The iterator and the underlying container or sequence cooperate to |Release()|
+       * the replaced element, if any and if necessary, and to |AddRef()| the new element.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @param anElementToPut the element to place into the underlying container or sequence
+       */
+    void putElement( in nsISupports anElementToPut );
+
+      /**
+       * Advance this iterator to the next position in the underlying container or sequence.
+       */
+    void stepForward();
+
+      /**
+       * Test if |anotherIterator| points to the same position in the underlying container or sequence.
+       *
+       * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence.
+       *
+       * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence
+       * @result true if |anotherIterator| points to the same position in the underlying container or sequence
+       */
+    boolean isEqualTo( in nsISupports anotherIterator );
+
+      /**
+       * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points.
+       * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator.
+       *
+       * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator
+       */
+    nsISupports clone();
+  };
+
+  /**
+   * ...
+   */
+[scriptable, uuid(948defaa-1dd1-11b2-89f6-8ce81f5ebda9)]
+interface nsIBidirectionalIterator : nsISupports
+  {
+      /**
+       * Retrieve (and |AddRef()|) the element this iterator currently points to.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @result a new reference to the element this iterator currently points to (if any)
+       */
+    nsISupports getElement();
+
+      /**
+       * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator.
+       * The iterator and the underlying container or sequence cooperate to |Release()|
+       * the replaced element, if any and if necessary, and to |AddRef()| the new element.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @param anElementToPut the element to place into the underlying container or sequence
+       */
+    void putElement( in nsISupports anElementToPut );
+
+      /**
+       * Advance this iterator to the next position in the underlying container or sequence.
+       */
+    void stepForward();
+
+      /**
+       * Move this iterator to the previous position in the underlying container or sequence.
+       */
+    void stepBackward();
+
+      /**
+       * Test if |anotherIterator| points to the same position in the underlying container or sequence.
+       *
+       * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence.
+       *
+       * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence
+       * @result true if |anotherIterator| points to the same position in the underlying container or sequence
+       */
+    boolean isEqualTo( in nsISupports anotherIterator );
+
+      /**
+       * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points.
+       * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator.
+       *
+       * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator
+       */
+    nsISupports clone();
+  };
+
+  /**
+   * ...
+   */
+[scriptable, uuid(9bd6fdb0-1dd1-11b2-9101-d15375968230)]
+interface nsIRandomAccessIterator : nsISupports
+  {
+      /**
+       * Retrieve (and |AddRef()|) the element this iterator currently points to.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @result a new reference to the element this iterator currently points to (if any)
+       */
+    nsISupports getElement();
+
+      /**
+       * Retrieve (and |AddRef()|) an element at some offset from where this iterator currently points.
+       * The offset may be negative.  |getElementAt(0)| is equivalent to |getElement()|.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @param anOffset a |0|-based offset from the position to which this iterator currently points
+       * @result a new reference to the indicated element (if any)
+       */
+    nsISupports getElementAt( in PRInt32 anOffset );
+
+      /**
+       * Put |anElementToPut| into the underlying container or sequence at the position currently pointed to by this iterator.
+       * The iterator and the underlying container or sequence cooperate to |Release()|
+       * the replaced element, if any and if necessary, and to |AddRef()| the new element.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @param anElementToPut the element to place into the underlying container or sequence
+       */
+    void putElement( in nsISupports anElementToPut );
+
+      /**
+       * Put |anElementToPut| into the underlying container or sequence at the position |anOffset| away from that currently pointed to by this iterator.
+       * The iterator and the underlying container or sequence cooperate to |Release()|
+       * the replaced element, if any and if necessary, and to |AddRef()| the new element.
+       * |putElementAt(0, obj)| is equivalent to |putElement(obj)|.
+       *
+       * The result is undefined if this iterator currently points outside the
+       * useful range of the underlying container or sequence.
+       *
+       * @param anOffset a |0|-based offset from the position to which this iterator currently points
+       * @param anElementToPut the element to place into the underlying container or sequence
+       */
+    void putElementAt( in PRInt32 anOffset, in nsISupports anElementToPut );
+
+      /**
+       * Advance this iterator to the next position in the underlying container or sequence.
+       */
+    void stepForward();
+
+      /**
+       * Move this iterator by |anOffset| positions in the underlying container or sequence.
+       * |anOffset| may be negative.  |stepForwardBy(1)| is equivalent to |stepForward()|.
+       * |stepForwardBy(0)| is a no-op.
+       *
+       * @param anOffset a |0|-based offset from the position to which this iterator currently points
+       */
+    void stepForwardBy( in PRInt32 anOffset );
+
+      /**
+       * Move this iterator to the previous position in the underlying container or sequence.
+       */
+    void stepBackward();
+
+      /**
+       * Move this iterator backwards by |anOffset| positions in the underlying container or sequence.
+       * |anOffset| may be negative.  |stepBackwardBy(1)| is equivalent to |stepBackward()|.
+       * |stepBackwardBy(n)| is equivalent to |stepForwardBy(-n)|.  |stepBackwardBy(0)| is a no-op.
+       *
+       * @param anOffset a |0|-based offset from the position to which this iterator currently points
+       */
+    void stepBackwardBy( in PRInt32 anOffset );
+
+      /**
+       * Test if |anotherIterator| points to the same position in the underlying container or sequence.
+       *
+       * The result is undefined if |anotherIterator| was not created by or for the same underlying container or sequence.
+       *
+       * @param anotherIterator another iterator to compare against, created by or for the same underlying container or sequence
+       * @result true if |anotherIterator| points to the same position in the underlying container or sequence
+       */
+    boolean isEqualTo( in nsISupports anotherIterator );
+
+      /**
+       * Create a new iterator pointing to the same position in the underlying container or sequence to which this iterator currently points.
+       * The returned iterator is suitable for use in a subsequent call to |isEqualTo()| against this iterator.
+       *
+       * @result a new iterator pointing at the same position in the same underlying container or sequence as this iterator
+       */
+    nsISupports clone();
+  };
+
+%{C++
+%}