summaryrefslogtreecommitdiffstats
path: root/src/libs/xpcom18a4/nsprpub/pr/tests/accept.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/accept.c')
-rw-r--r--src/libs/xpcom18a4/nsprpub/pr/tests/accept.c524
1 files changed, 524 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/accept.c b/src/libs/xpcom18a4/nsprpub/pr/tests/accept.c
new file mode 100644
index 00000000..4fada1aa
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/accept.c
@@ -0,0 +1,524 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/***********************************************************************
+** 1996 - Netscape Communications Corporation
+**
+** Name: accept.c
+**
+** Description: Run accept() sucessful connection tests.
+**
+** Modification History:
+** 04-Jun-97 AGarcia - Reconvert test file to return a 0 for PASS and a 1 for FAIL
+** 13-May-97 AGarcia- Converted the test to accomodate the debug_mode
+** The debug mode will print all of the printfs associated with this test.
+** The regress mode will be the default mode. Since the regress tool limits
+** the output to a one line status:PASS or FAIL,all of the printf statements
+** have been handled with an if (debug_mode) statement.
+** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to
+** recognize the return code from tha main program.
+** 12-June-97 Revert to return code 0 and 1.
+***********************************************************************/
+
+/***********************************************************************
+** Includes
+***********************************************************************/
+
+#include "nspr.h"
+#include "prpriv.h"
+
+#include <stdlib.h>
+#include <string.h>
+
+#include "plgetopt.h"
+#include "plerror.h"
+
+#define BASE_PORT 10000
+
+#define CLIENT_DATA 128
+
+#define ACCEPT_NORMAL 0x1
+#define ACCEPT_FAST 0x2
+#define ACCEPT_READ 0x3
+#define ACCEPT_READ_FAST 0x4
+#define ACCEPT_READ_FAST_CB 0x5
+
+#define CLIENT_NORMAL 0x1
+#define CLIENT_TIMEOUT_ACCEPT 0x2
+#define CLIENT_TIMEOUT_SEND 0x3
+
+#define SERVER_MAX_BIND_COUNT 100
+
+#if defined(XP_MAC) || defined(XP_OS2)
+#define TIMEOUTSECS 10
+#else
+#define TIMEOUTSECS 2
+#endif
+PRIntervalTime timeoutTime;
+
+static PRInt32 count = 1;
+static PRFileDesc *output;
+static PRNetAddr serverAddr;
+static PRThreadScope thread_scope = PR_LOCAL_THREAD;
+static PRInt32 clientCommand;
+static PRInt32 iterations;
+static PRStatus rv;
+static PRFileDesc *listenSock;
+static PRFileDesc *clientSock = NULL;
+static PRNetAddr listenAddr;
+static PRNetAddr clientAddr;
+static PRThread *clientThread;
+static PRNetAddr *raddr;
+static char buf[4096 + 2*sizeof(PRNetAddr) + 32];
+static PRInt32 status;
+static PRInt32 bytesRead;
+
+PRIntn failed_already=0;
+PRIntn debug_mode;
+
+void Test_Assert(const char *msg, const char *file, PRIntn line)
+{
+ failed_already=1;
+ if (debug_mode) {
+ PR_fprintf(output, "@%s:%d ", file, line);
+ PR_fprintf(output, msg);
+ }
+} /* Test_Assert */
+
+#define TEST_ASSERT(expr) \
+ if (!(expr)) Test_Assert(#expr, __FILE__, __LINE__)
+
+#ifdef WINNT
+#define CALLBACK_MAGIC 0x12345678
+
+void timeout_callback(void *magic)
+{
+ TEST_ASSERT(magic == (void *)CALLBACK_MAGIC);
+ if (debug_mode)
+ PR_fprintf(output, "timeout callback called okay\n");
+}
+#endif
+
+
+static void PR_CALLBACK
+ClientThread(void *_action)
+{
+ PRInt32 action = * (PRInt32 *) _action;
+ PRInt32 iterations = count;
+ PRFileDesc *sock = NULL;
+
+ serverAddr.inet.family = PR_AF_INET;
+ serverAddr.inet.port = listenAddr.inet.port;
+ serverAddr.inet.ip = PR_htonl(PR_INADDR_LOOPBACK);
+
+ for (; iterations--;) {
+ PRInt32 rv;
+ char buf[CLIENT_DATA];
+
+ memset(buf, 0xaf, sizeof(buf)); /* initialize with arbitrary data */
+ sock = PR_NewTCPSocket();
+ if (!sock) {
+ if (!debug_mode)
+ failed_already=1;
+ else
+ PR_fprintf(output, "client: unable to create socket\n");
+ return;
+ }
+
+ if (action != CLIENT_TIMEOUT_ACCEPT) {
+
+ if ((rv = PR_Connect(sock, &serverAddr,
+ timeoutTime)) < 0) {
+ if (!debug_mode)
+ failed_already=1;
+ else
+ PR_fprintf(output,
+ "client: unable to connect to server (%ld, %ld, %ld, %ld)\n",
+ iterations, rv, PR_GetError(), PR_GetOSError());
+ goto ErrorExit;
+ }
+
+ if (action != CLIENT_TIMEOUT_SEND) {
+ if ((rv = PR_Send(sock, buf, CLIENT_DATA,
+ 0, timeoutTime))< 0) {
+ if (!debug_mode)
+ failed_already=1;
+ else
+ PR_fprintf(output,
+ "client: unable to send to server (%d, %ld, %ld)\n",
+ CLIENT_DATA, rv, PR_GetError());
+ goto ErrorExit;
+ }
+ } else {
+ PR_Sleep(PR_SecondsToInterval(TIMEOUTSECS + 1));
+ }
+ } else {
+ PR_Sleep(PR_SecondsToInterval(TIMEOUTSECS + 1));
+ }
+ if (debug_mode)
+ PR_fprintf(output, ".");
+ PR_Close(sock);
+ sock = NULL;
+ }
+ if (debug_mode)
+ PR_fprintf(output, "\n");
+
+ErrorExit:
+ if (sock != NULL)
+ PR_Close(sock);
+}
+
+
+static void
+RunTest(PRInt32 acceptType, PRInt32 clientAction)
+{
+int i;
+
+ /* First bind to the socket */
+ listenSock = PR_NewTCPSocket();
+ if (!listenSock) {
+ failed_already=1;
+ if (debug_mode)
+ PR_fprintf(output, "unable to create listen socket\n");
+ return;
+ }
+ memset(&listenAddr, 0 , sizeof(listenAddr));
+ listenAddr.inet.family = PR_AF_INET;
+ listenAddr.inet.port = PR_htons(BASE_PORT);
+ listenAddr.inet.ip = PR_htonl(PR_INADDR_ANY);
+ /*
+ * try a few times to bind server's address, if addresses are in
+ * use
+ */
+ i = 0;
+ while (PR_Bind(listenSock, &listenAddr) == PR_FAILURE) {
+ if (PR_GetError() == PR_ADDRESS_IN_USE_ERROR) {
+ listenAddr.inet.port += 2;
+ if (i++ < SERVER_MAX_BIND_COUNT)
+ continue;
+ }
+ failed_already=1;
+ if (debug_mode)
+ PR_fprintf(output,"accept: ERROR - PR_Bind failed\n");
+ return;
+ }
+
+
+ rv = PR_Listen(listenSock, 100);
+ if (rv == PR_FAILURE) {
+ failed_already=1;
+ if (debug_mode)
+ PR_fprintf(output, "unable to listen\n");
+ return;
+ }
+
+ clientCommand = clientAction;
+ clientThread = PR_CreateThread(PR_USER_THREAD, ClientThread,
+ (void *)&clientCommand, PR_PRIORITY_NORMAL, thread_scope,
+ PR_JOINABLE_THREAD, 0);
+ if (!clientThread) {
+ failed_already=1;
+ if (debug_mode)
+ PR_fprintf(output, "error creating client thread\n");
+ return;
+ }
+
+ iterations = count;
+ for (;iterations--;) {
+ switch (acceptType) {
+ case ACCEPT_NORMAL:
+ clientSock = PR_Accept(listenSock, &clientAddr,
+ timeoutTime);
+ switch(clientAction) {
+ case CLIENT_TIMEOUT_ACCEPT:
+ TEST_ASSERT(clientSock == 0);
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ case CLIENT_NORMAL:
+ TEST_ASSERT(clientSock);
+ bytesRead = PR_Recv(clientSock,
+ buf, CLIENT_DATA, 0, timeoutTime);
+ TEST_ASSERT(bytesRead == CLIENT_DATA);
+ break;
+ case CLIENT_TIMEOUT_SEND:
+ TEST_ASSERT(clientSock);
+ bytesRead = PR_Recv(clientSock,
+ buf, CLIENT_DATA, 0, timeoutTime);
+ TEST_ASSERT(bytesRead == -1);
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ }
+ break;
+ case ACCEPT_READ:
+ status = PR_AcceptRead(listenSock, &clientSock,
+ &raddr, buf, CLIENT_DATA, timeoutTime);
+ switch(clientAction) {
+ case CLIENT_TIMEOUT_ACCEPT:
+ /* Invalid test case */
+ TEST_ASSERT(0);
+ break;
+ case CLIENT_NORMAL:
+ TEST_ASSERT(clientSock);
+ TEST_ASSERT(status == CLIENT_DATA);
+ break;
+ case CLIENT_TIMEOUT_SEND:
+ TEST_ASSERT(status == -1);
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ }
+ break;
+#ifdef WINNT
+ case ACCEPT_FAST:
+ clientSock = PR_NTFast_Accept(listenSock,
+ &clientAddr, timeoutTime);
+ switch(clientAction) {
+ case CLIENT_TIMEOUT_ACCEPT:
+ TEST_ASSERT(clientSock == 0);
+ if (debug_mode)
+ PR_fprintf(output, "PR_GetError is %ld\n", PR_GetError());
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ case CLIENT_NORMAL:
+ TEST_ASSERT(clientSock);
+ bytesRead = PR_Recv(clientSock,
+ buf, CLIENT_DATA, 0, timeoutTime);
+ TEST_ASSERT(bytesRead == CLIENT_DATA);
+ break;
+ case CLIENT_TIMEOUT_SEND:
+ TEST_ASSERT(clientSock);
+ bytesRead = PR_Recv(clientSock,
+ buf, CLIENT_DATA, 0, timeoutTime);
+ TEST_ASSERT(bytesRead == -1);
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ }
+ break;
+ break;
+ case ACCEPT_READ_FAST:
+ status = PR_NTFast_AcceptRead(listenSock,
+ &clientSock, &raddr, buf, 4096, timeoutTime);
+ switch(clientAction) {
+ case CLIENT_TIMEOUT_ACCEPT:
+ /* Invalid test case */
+ TEST_ASSERT(0);
+ break;
+ case CLIENT_NORMAL:
+ TEST_ASSERT(clientSock);
+ TEST_ASSERT(status == CLIENT_DATA);
+ break;
+ case CLIENT_TIMEOUT_SEND:
+ TEST_ASSERT(clientSock == NULL);
+ TEST_ASSERT(status == -1);
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ }
+ break;
+ case ACCEPT_READ_FAST_CB:
+ status = PR_NTFast_AcceptRead_WithTimeoutCallback(
+ listenSock, &clientSock, &raddr, buf, 4096,
+ timeoutTime, timeout_callback, (void *)CALLBACK_MAGIC);
+ switch(clientAction) {
+ case CLIENT_TIMEOUT_ACCEPT:
+ /* Invalid test case */
+ TEST_ASSERT(0);
+ break;
+ case CLIENT_NORMAL:
+ TEST_ASSERT(clientSock);
+ TEST_ASSERT(status == CLIENT_DATA);
+ break;
+ case CLIENT_TIMEOUT_SEND:
+ if (debug_mode)
+ PR_fprintf(output, "clientSock = 0x%8.8lx\n", clientSock);
+ TEST_ASSERT(clientSock == NULL);
+ TEST_ASSERT(status == -1);
+ TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR);
+ break;
+ }
+ break;
+#endif
+ }
+ if (clientSock != NULL) {
+ PR_Close(clientSock);
+ clientSock = NULL;
+ }
+ }
+ PR_Close(listenSock);
+
+ PR_JoinThread(clientThread);
+}
+
+
+void AcceptUpdatedTest(void)
+{
+ RunTest(ACCEPT_NORMAL, CLIENT_NORMAL);
+}
+void AcceptNotUpdatedTest(void)
+{
+ RunTest(ACCEPT_FAST, CLIENT_NORMAL);
+}
+void AcceptReadTest(void)
+{
+ RunTest(ACCEPT_READ, CLIENT_NORMAL);
+}
+void AcceptReadNotUpdatedTest(void)
+{
+ RunTest(ACCEPT_READ_FAST, CLIENT_NORMAL);
+}
+void AcceptReadCallbackTest(void)
+{
+ RunTest(ACCEPT_READ_FAST_CB, CLIENT_NORMAL);
+}
+
+void TimeoutAcceptUpdatedTest(void)
+{
+ RunTest(ACCEPT_NORMAL, CLIENT_TIMEOUT_ACCEPT);
+}
+void TimeoutAcceptNotUpdatedTest(void)
+{
+ RunTest(ACCEPT_FAST, CLIENT_TIMEOUT_ACCEPT);
+}
+void TimeoutAcceptReadCallbackTest(void)
+{
+ RunTest(ACCEPT_READ_FAST_CB, CLIENT_TIMEOUT_ACCEPT);
+}
+
+void TimeoutReadUpdatedTest(void)
+{
+ RunTest(ACCEPT_NORMAL, CLIENT_TIMEOUT_SEND);
+}
+void TimeoutReadNotUpdatedTest(void)
+{
+ RunTest(ACCEPT_FAST, CLIENT_TIMEOUT_SEND);
+}
+void TimeoutReadReadTest(void)
+{
+ RunTest(ACCEPT_READ, CLIENT_TIMEOUT_SEND);
+}
+void TimeoutReadReadNotUpdatedTest(void)
+{
+ RunTest(ACCEPT_READ_FAST, CLIENT_TIMEOUT_SEND);
+}
+void TimeoutReadReadCallbackTest(void)
+{
+ RunTest(ACCEPT_READ_FAST_CB, CLIENT_TIMEOUT_SEND);
+}
+
+/************************************************************************/
+
+static void Measure(void (*func)(void), const char *msg)
+{
+ PRIntervalTime start, stop;
+ double d;
+
+ start = PR_IntervalNow();
+ (*func)();
+ stop = PR_IntervalNow();
+
+ d = (double)PR_IntervalToMicroseconds(stop - start);
+ if (debug_mode)
+ PR_fprintf(output, "%40s: %6.2f usec\n", msg, d / count);
+
+}
+
+int main(int argc, char **argv)
+{
+
+ /* The command line argument: -d is used to determine if the test is being run
+ in debug mode. The regress tool requires only one line output:PASS or FAIL.
+ All of the printfs associated with this test has been handled with a if (debug_mode)
+ test.
+ Usage: test_name [-d] [-c n]
+ */
+ PLOptStatus os;
+ PLOptState *opt = PL_CreateOptState(argc, argv, "Gdc:");
+ while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+ {
+ if (PL_OPT_BAD == os) continue;
+ switch (opt->option)
+ {
+ case 'G': /* global threads */
+ thread_scope = PR_GLOBAL_THREAD;
+ break;
+ case 'd': /* debug mode */
+ debug_mode = 1;
+ break;
+ case 'c': /* loop counter */
+ count = atoi(opt->value);
+ break;
+ default:
+ break;
+ }
+ }
+ PL_DestroyOptState(opt);
+
+ PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
+ output = PR_STDERR;
+ PR_STDIO_INIT();
+
+#ifdef XP_MAC
+ SetupMacPrintfLog("accept.log");
+ debug_mode = 1;
+#endif
+
+ timeoutTime = PR_SecondsToInterval(TIMEOUTSECS);
+ if (debug_mode)
+ PR_fprintf(output, "\nRun accept() sucessful connection tests\n");
+
+ Measure(AcceptUpdatedTest, "PR_Accept()");
+ Measure(AcceptReadTest, "PR_AcceptRead()");
+#ifdef WINNT
+ Measure(AcceptNotUpdatedTest, "PR_NTFast_Accept()");
+ Measure(AcceptReadNotUpdatedTest, "PR_NTFast_AcceptRead()");
+ Measure(AcceptReadCallbackTest, "PR_NTFast_AcceptRead_WithTimeoutCallback()");
+#endif
+ if (debug_mode)
+ PR_fprintf(output, "\nRun accept() timeout in the accept tests\n");
+#ifdef WINNT
+ Measure(TimeoutReadReadCallbackTest, "PR_NTFast_AcceptRead_WithTimeoutCallback()");
+#endif
+ Measure(TimeoutReadUpdatedTest, "PR_Accept()");
+ if (debug_mode)
+ PR_fprintf(output, "\nRun accept() timeout in the read tests\n");
+ Measure(TimeoutReadReadTest, "PR_AcceptRead()");
+#ifdef WINNT
+ Measure(TimeoutReadNotUpdatedTest, "PR_NTFast_Accept()");
+ Measure(TimeoutReadReadNotUpdatedTest, "PR_NTFast_AcceptRead()");
+ Measure(TimeoutReadReadCallbackTest, "PR_NTFast_AcceptRead_WithTimeoutCallback()");
+#endif
+ PR_fprintf(output, "%s\n", (failed_already) ? "FAIL" : "PASS");
+ return failed_already;
+}