diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/cltsrv.c')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/cltsrv.c | 1226 |
1 files changed, 1226 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/cltsrv.c b/src/libs/xpcom18a4/nsprpub/pr/tests/cltsrv.c new file mode 100644 index 00000000..96027843 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/cltsrv.c @@ -0,0 +1,1226 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* + * + * Notes: + * [1] lth. The call to Sleep() is a hack to get the test case to run + * on Windows 95. Without it, the test case fails with an error + * WSAECONNRESET following a recv() call. The error is caused by the + * server side thread termination without a shutdown() or closesocket() + * call. Windows docmunentation suggests that this is predicted + * behavior; that other platforms get away with it is ... serindipity. + * The test case should shutdown() or closesocket() before + * thread termination. I didn't have time to figure out where or how + * to do it. The Sleep() call inserts enough delay to allow the + * client side to recv() all his data before the server side thread + * terminates. Whew! ... + * + ** Modification History: + * 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. + * The debug mode will print all of the printfs associated with this test. + * The regress mode will be the default mode. Since the regress tool limits + * the output to a one line status:PASS or FAIL,all of the printf statements + * have been handled with an if (debug_mode) statement. + */ + +#include "prclist.h" +#include "prcvar.h" +#include "prerror.h" +#include "prinit.h" +#include "prinrval.h" +#include "prio.h" +#include "prlock.h" +#include "prlog.h" +#include "prtime.h" +#include "prmem.h" +#include "prnetdb.h" +#include "prprf.h" +#include "prthread.h" + +#include "pprio.h" +#include "primpl.h" + +#include "plstr.h" +#include "plerror.h" +#include "plgetopt.h" + +#include <stdlib.h> +#include <string.h> + + +#if defined(XP_UNIX) +#include <math.h> +#endif + +#ifdef XP_MAC +#include "prlog.h" +#define printf PR_LogPrint +#endif + +/* +** This is the beginning of the test +*/ + +#define RECV_FLAGS 0 +#define SEND_FLAGS 0 +#define DEFAULT_LOW 0 +#define DEFAULT_HIGH 0 +#define BUFFER_SIZE 1024 +#define DEFAULT_BACKLOG 5 +#define DEFAULT_PORT 12849 +#define DEFAULT_CLIENTS 1 +#define ALLOWED_IN_ACCEPT 1 +#define DEFAULT_CLIPPING 1000 +#define DEFAULT_WORKERS_MIN 1 +#define DEFAULT_WORKERS_MAX 1 +#define DEFAULT_SERVER "localhost" +#define DEFAULT_EXECUTION_TIME 10 +#define DEFAULT_CLIENT_TIMEOUT 4000 +#define DEFAULT_SERVER_TIMEOUT 4000 +#define DEFAULT_SERVER_PRIORITY PR_PRIORITY_HIGH + +typedef enum CSState_e {cs_init, cs_run, cs_stop, cs_exit} CSState_t; + +static void PR_CALLBACK Worker(void *arg); +typedef struct CSPool_s CSPool_t; +typedef struct CSWorker_s CSWorker_t; +typedef struct CSServer_s CSServer_t; +typedef enum Verbosity +{ + TEST_LOG_ALWAYS, + TEST_LOG_ERROR, + TEST_LOG_WARNING, + TEST_LOG_NOTICE, + TEST_LOG_INFO, + TEST_LOG_STATUS, + TEST_LOG_VERBOSE +} Verbosity; + +static PRInt32 domain = AF_INET; +static PRInt32 protocol = 6; /* TCP */ +static PRFileDesc *debug_out = NULL; +static PRBool debug_mode = PR_FALSE; +static PRBool pthread_stats = PR_FALSE; +static Verbosity verbosity = TEST_LOG_ALWAYS; +static PRThreadScope thread_scope = PR_LOCAL_THREAD; + +struct CSWorker_s +{ + PRCList element; /* list of the server's workers */ + + PRThread *thread; /* this worker objects thread */ + CSServer_t *server; /* back pointer to server structure */ +}; + +struct CSPool_s +{ + PRCondVar *exiting; + PRCondVar *acceptComplete; + PRUint32 accepting, active, workers; +}; + +struct CSServer_s +{ + PRCList list; /* head of worker list */ + + PRLock *ml; + PRThread *thread; /* the main server thread */ + PRCondVar *stateChange; + + PRUint16 port; /* port we're listening on */ + PRUint32 backlog; /* size of our listener backlog */ + PRFileDesc *listener; /* the fd accepting connections */ + + CSPool_t pool; /* statistics on worker threads */ + CSState_t state; /* the server's state */ + struct /* controlling worker counts */ + { + PRUint32 minimum, maximum, accepting; + } workers; + + /* statistics */ + PRIntervalTime started, stopped; + PRUint32 operations, bytesTransferred; +}; + +typedef struct CSDescriptor_s +{ + PRInt32 size; /* size of transfer */ + char filename[60]; /* filename, null padded */ +} CSDescriptor_t; + +typedef struct CSClient_s +{ + PRLock *ml; + PRThread *thread; + PRCondVar *stateChange; + PRNetAddr serverAddress; + + CSState_t state; + + /* statistics */ + PRIntervalTime started, stopped; + PRUint32 operations, bytesTransferred; +} CSClient_t; + +#define TEST_LOG(l, p, a) \ + do { \ + if (debug_mode || (p <= verbosity)) printf a; \ + } while (0) + +PRLogModuleInfo *cltsrv_log_file = NULL; + +#define MY_ASSERT(_expr) \ + ((_expr)?((void)0):_MY_Assert(# _expr,__FILE__,__LINE__)) + +#define TEST_ASSERT(_expr) \ + ((_expr)?((void)0):_MY_Assert(# _expr,__FILE__,__LINE__)) + +static void _MY_Assert(const char *s, const char *file, PRIntn ln) +{ + PL_PrintError(NULL); +#if DEBUG + PR_Assert(s, file, ln); +#endif +} /* _MW_Assert */ + +static PRBool Aborted(PRStatus rv) +{ + return ((PR_FAILURE == rv) && (PR_PENDING_INTERRUPT_ERROR == PR_GetError())) ? + PR_TRUE : PR_FALSE; +} + +static void TimeOfDayMessage(const char *msg, PRThread* me) +{ + char buffer[100]; + PRExplodedTime tod; + PR_ExplodeTime(PR_Now(), PR_LocalTimeParameters, &tod); + (void)PR_FormatTime(buffer, sizeof(buffer), "%T", &tod); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_ALWAYS, + ("%s(0x%p): %s\n", msg, me, buffer)); +} /* TimeOfDayMessage */ + + +static void PR_CALLBACK Client(void *arg) +{ + PRStatus rv; + PRIntn index; + char buffer[1024]; + PRFileDesc *fd = NULL; + PRUintn clipping = DEFAULT_CLIPPING; + PRThread *me = PR_CurrentThread(); + CSClient_t *client = (CSClient_t*)arg; + CSDescriptor_t *descriptor = PR_NEW(CSDescriptor_t); + PRIntervalTime timeout = PR_MillisecondsToInterval(DEFAULT_CLIENT_TIMEOUT); + + + for (index = 0; index < sizeof(buffer); ++index) + buffer[index] = (char)index; + + client->started = PR_IntervalNow(); + + PR_Lock(client->ml); + client->state = cs_run; + PR_NotifyCondVar(client->stateChange); + PR_Unlock(client->ml); + + TimeOfDayMessage("Client started at", me); + + while (cs_run == client->state) + { + PRInt32 bytes, descbytes, filebytes, netbytes; + + (void)PR_NetAddrToString(&client->serverAddress, buffer, sizeof(buffer)); + TEST_LOG(cltsrv_log_file, TEST_LOG_INFO, + ("\tClient(0x%p): connecting to server at %s\n", me, buffer)); + + fd = PR_Socket(domain, SOCK_STREAM, protocol); + TEST_ASSERT(NULL != fd); + rv = PR_Connect(fd, &client->serverAddress, timeout); + if (PR_FAILURE == rv) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tClient(0x%p): conection failed (%d, %d)\n", + me, PR_GetError(), PR_GetOSError())); + goto aborted; + } + + memset(descriptor, 0, sizeof(*descriptor)); + descriptor->size = PR_htonl(descbytes = rand() % clipping); + PR_snprintf( + descriptor->filename, sizeof(descriptor->filename), + "CS%p%p-%p.dat", client->started, me, client->operations); + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tClient(0x%p): sending descriptor for %u bytes\n", me, descbytes)); + bytes = PR_Send( + fd, descriptor, sizeof(*descriptor), SEND_FLAGS, timeout); + if (sizeof(CSDescriptor_t) != bytes) + { + if (Aborted(PR_FAILURE)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tClient(0x%p): send descriptor timeout\n", me)); + goto retry; + } + } + TEST_ASSERT(sizeof(*descriptor) == bytes); + + netbytes = 0; + while (netbytes < descbytes) + { + filebytes = sizeof(buffer); + if ((descbytes - netbytes) < filebytes) + filebytes = descbytes - netbytes; + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tClient(0x%p): sending %d bytes\n", me, filebytes)); + bytes = PR_Send(fd, buffer, filebytes, SEND_FLAGS, timeout); + if (filebytes != bytes) + { + if (Aborted(PR_FAILURE)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tClient(0x%p): send data timeout\n", me)); + goto retry; + } + } + TEST_ASSERT(bytes == filebytes); + netbytes += bytes; + } + filebytes = 0; + while (filebytes < descbytes) + { + netbytes = sizeof(buffer); + if ((descbytes - filebytes) < netbytes) + netbytes = descbytes - filebytes; + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tClient(0x%p): receiving %d bytes\n", me, netbytes)); + bytes = PR_Recv(fd, buffer, netbytes, RECV_FLAGS, timeout); + if (-1 == bytes) + { + if (Aborted(PR_FAILURE)) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tClient(0x%p): receive data aborted\n", me)); + goto aborted; + } + else if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tClient(0x%p): receive data timeout\n", me)); + else + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tClient(0x%p): receive error (%d, %d)\n", + me, PR_GetError(), PR_GetOSError())); + goto retry; + } + if (0 == bytes) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tClient(0x%p): unexpected end of stream\n", + PR_CurrentThread())); + break; + } + filebytes += bytes; + } + + rv = PR_Shutdown(fd, PR_SHUTDOWN_BOTH); + if (Aborted(rv)) goto aborted; + TEST_ASSERT(PR_SUCCESS == rv); +retry: + (void)PR_Close(fd); fd = NULL; + TEST_LOG( + cltsrv_log_file, TEST_LOG_INFO, + ("\tClient(0x%p): disconnected from server\n", me)); + + PR_Lock(client->ml); + client->operations += 1; + client->bytesTransferred += 2 * descbytes; + rv = PR_WaitCondVar(client->stateChange, rand() % clipping); + PR_Unlock(client->ml); + if (Aborted(rv)) break; + } + +aborted: + client->stopped = PR_IntervalNow(); + + PR_ClearInterrupt(); + if (NULL != fd) rv = PR_Close(fd); + + PR_Lock(client->ml); + client->state = cs_exit; + PR_NotifyCondVar(client->stateChange); + PR_Unlock(client->ml); + PR_DELETE(descriptor); + TEST_LOG( + cltsrv_log_file, TEST_LOG_ALWAYS, + ("\tClient(0x%p): stopped after %u operations and %u bytes\n", + PR_CurrentThread(), client->operations, client->bytesTransferred)); + +} /* Client */ + +static PRStatus ProcessRequest(PRFileDesc *fd, CSServer_t *server) +{ + PRStatus drv, rv; + char buffer[1024]; + PRFileDesc *file = NULL; + PRThread * me = PR_CurrentThread(); + PRInt32 bytes, descbytes, netbytes, filebytes = 0; + CSDescriptor_t *descriptor = PR_NEW(CSDescriptor_t); + PRIntervalTime timeout = PR_MillisecondsToInterval(DEFAULT_SERVER_TIMEOUT); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tProcessRequest(0x%p): receiving desciptor\n", me)); + bytes = PR_Recv( + fd, descriptor, sizeof(*descriptor), RECV_FLAGS, timeout); + if (-1 == bytes) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto exit; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tProcessRequest(0x%p): receive timeout\n", me)); + } + goto exit; + } + if (0 == bytes) + { + rv = PR_FAILURE; + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tProcessRequest(0x%p): unexpected end of file\n", me)); + goto exit; + } + descbytes = PR_ntohl(descriptor->size); + TEST_ASSERT(sizeof(*descriptor) == bytes); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\t\tProcessRequest(0x%p): read descriptor {%d, %s}\n", + me, descbytes, descriptor->filename)); + + file = PR_Open( + descriptor->filename, (PR_CREATE_FILE | PR_WRONLY), 0666); + if (NULL == file) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\tProcessRequest(0x%p): open file timeout\n", me)); + goto aborted; + } + } + TEST_ASSERT(NULL != file); + + filebytes = 0; + while (filebytes < descbytes) + { + netbytes = sizeof(buffer); + if ((descbytes - filebytes) < netbytes) + netbytes = descbytes - filebytes; + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tProcessRequest(0x%p): receive %d bytes\n", me, netbytes)); + bytes = PR_Recv(fd, buffer, netbytes, RECV_FLAGS, timeout); + if (-1 == bytes) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): receive data timeout\n", me)); + goto aborted; + } + /* + * XXX: I got (PR_CONNECT_RESET_ERROR, ERROR_NETNAME_DELETED) + * on NT here. This is equivalent to ECONNRESET on Unix. + * -wtc + */ + TEST_LOG( + cltsrv_log_file, TEST_LOG_WARNING, + ("\t\tProcessRequest(0x%p): unexpected error (%d, %d)\n", + me, PR_GetError(), PR_GetOSError())); + goto aborted; + } + if(0 == bytes) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_WARNING, + ("\t\tProcessRequest(0x%p): unexpected end of stream\n", me)); + rv = PR_FAILURE; + goto aborted; + } + filebytes += bytes; + netbytes = bytes; + /* The byte count for PR_Write should be positive */ + MY_ASSERT(netbytes > 0); + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tProcessRequest(0x%p): write %d bytes to file\n", me, netbytes)); + bytes = PR_Write(file, buffer, netbytes); + if (netbytes != bytes) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): write file timeout\n", me)); + goto aborted; + } + } + TEST_ASSERT(bytes > 0); + } + + PR_Lock(server->ml); + server->operations += 1; + server->bytesTransferred += filebytes; + PR_Unlock(server->ml); + + rv = PR_Close(file); + if (Aborted(rv)) goto aborted; + TEST_ASSERT(PR_SUCCESS == rv); + file = NULL; + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\t\tProcessRequest(0x%p): opening %s\n", me, descriptor->filename)); + file = PR_Open(descriptor->filename, PR_RDONLY, 0); + if (NULL == file) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): open file timeout\n", + PR_CurrentThread())); + goto aborted; + } + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): other file open error (%u, %u)\n", + me, PR_GetError(), PR_GetOSError())); + goto aborted; + } + TEST_ASSERT(NULL != file); + + netbytes = 0; + while (netbytes < descbytes) + { + filebytes = sizeof(buffer); + if ((descbytes - netbytes) < filebytes) + filebytes = descbytes - netbytes; + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tProcessRequest(0x%p): read %d bytes from file\n", me, filebytes)); + bytes = PR_Read(file, buffer, filebytes); + if (filebytes != bytes) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): read file timeout\n", me)); + else + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): other file error (%d, %d)\n", + me, PR_GetError(), PR_GetOSError())); + goto aborted; + } + TEST_ASSERT(bytes > 0); + netbytes += bytes; + filebytes = bytes; + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\t\tProcessRequest(0x%p): sending %d bytes\n", me, filebytes)); + bytes = PR_Send(fd, buffer, filebytes, SEND_FLAGS, timeout); + if (filebytes != bytes) + { + rv = PR_FAILURE; + if (Aborted(rv)) goto aborted; + if (PR_IO_TIMEOUT_ERROR == PR_GetError()) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tProcessRequest(0x%p): send data timeout\n", me)); + goto aborted; + } + break; + } + TEST_ASSERT(bytes > 0); + } + + PR_Lock(server->ml); + server->bytesTransferred += filebytes; + PR_Unlock(server->ml); + + rv = PR_Shutdown(fd, PR_SHUTDOWN_BOTH); + if (Aborted(rv)) goto aborted; + + rv = PR_Close(file); + if (Aborted(rv)) goto aborted; + TEST_ASSERT(PR_SUCCESS == rv); + file = NULL; + +aborted: + PR_ClearInterrupt(); + if (NULL != file) PR_Close(file); + drv = PR_Delete(descriptor->filename); + TEST_ASSERT(PR_SUCCESS == drv); +exit: + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\t\tProcessRequest(0x%p): Finished\n", me)); + + PR_DELETE(descriptor); + +#if defined(WIN95) + PR_Sleep(PR_MillisecondsToInterval(200)); /* lth. see note [1] */ +#endif + return rv; +} /* ProcessRequest */ + +static PRStatus CreateWorker(CSServer_t *server, CSPool_t *pool) +{ + CSWorker_t *worker = PR_NEWZAP(CSWorker_t); + worker->server = server; + PR_INIT_CLIST(&worker->element); + worker->thread = PR_CreateThread( + PR_USER_THREAD, Worker, worker, + DEFAULT_SERVER_PRIORITY, thread_scope, + PR_UNJOINABLE_THREAD, 0); + if (NULL == worker->thread) + { + PR_DELETE(worker); + return PR_FAILURE; + } + + TEST_LOG(cltsrv_log_file, TEST_LOG_STATUS, + ("\tCreateWorker(0x%p): create new worker (0x%p)\n", + PR_CurrentThread(), worker->thread)); + + return PR_SUCCESS; +} /* CreateWorker */ + +static void PR_CALLBACK Worker(void *arg) +{ + PRStatus rv; + PRNetAddr from; + PRFileDesc *fd = NULL; + PRThread *me = PR_CurrentThread(); + CSWorker_t *worker = (CSWorker_t*)arg; + CSServer_t *server = worker->server; + CSPool_t *pool = &server->pool; + + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("\t\tWorker(0x%p): started [%u]\n", me, pool->workers + 1)); + + PR_Lock(server->ml); + PR_APPEND_LINK(&worker->element, &server->list); + pool->workers += 1; /* define our existance */ + + while (cs_run == server->state) + { + while (pool->accepting >= server->workers.accepting) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\t\tWorker(0x%p): waiting for accept slot[%d]\n", + me, pool->accepting)); + rv = PR_WaitCondVar(pool->acceptComplete, PR_INTERVAL_NO_TIMEOUT); + if (Aborted(rv) || (cs_run != server->state)) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("\tWorker(0x%p): has been %s\n", + me, (Aborted(rv) ? "interrupted" : "stopped"))); + goto exit; + } + } + pool->accepting += 1; /* how many are really in accept */ + PR_Unlock(server->ml); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\t\tWorker(0x%p): calling accept\n", me)); + fd = PR_Accept(server->listener, &from, PR_INTERVAL_NO_TIMEOUT); + + PR_Lock(server->ml); + pool->accepting -= 1; + PR_NotifyCondVar(pool->acceptComplete); + + if ((NULL == fd) && Aborted(PR_FAILURE)) + { + if (NULL != server->listener) + { + PR_Close(server->listener); + server->listener = NULL; + } + goto exit; + } + + if (NULL != fd) + { + /* + ** Create another worker of the total number of workers is + ** less than the minimum specified or we have none left in + ** accept() AND we're not over the maximum. + ** This sort of presumes that the number allowed in accept + ** is at least as many as the minimum. Otherwise we'll keep + ** creating new threads and deleting them soon after. + */ + PRBool another = + ((pool->workers < server->workers.minimum) || + ((0 == pool->accepting) + && (pool->workers < server->workers.maximum))) ? + PR_TRUE : PR_FALSE; + pool->active += 1; + PR_Unlock(server->ml); + + if (another) (void)CreateWorker(server, pool); + + rv = ProcessRequest(fd, server); + if (PR_SUCCESS != rv) + TEST_LOG( + cltsrv_log_file, TEST_LOG_ERROR, + ("\t\tWorker(0x%p): server process ended abnormally\n", me)); + (void)PR_Close(fd); fd = NULL; + + PR_Lock(server->ml); + pool->active -= 1; + } + } + +exit: + PR_ClearInterrupt(); + PR_Unlock(server->ml); + + if (NULL != fd) + { + (void)PR_Shutdown(fd, PR_SHUTDOWN_BOTH); + (void)PR_Close(fd); + } + + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("\t\tWorker(0x%p): exiting [%u]\n", PR_CurrentThread(), pool->workers)); + + PR_Lock(server->ml); + pool->workers -= 1; /* undefine our existance */ + PR_REMOVE_AND_INIT_LINK(&worker->element); + PR_NotifyCondVar(pool->exiting); + PR_Unlock(server->ml); + + PR_DELETE(worker); /* destruction of the "worker" object */ + +} /* Worker */ + +static void PR_CALLBACK Server(void *arg) +{ + PRStatus rv; + PRNetAddr serverAddress; + PRThread *me = PR_CurrentThread(); + CSServer_t *server = (CSServer_t*)arg; + PRSocketOptionData sockOpt; + + server->listener = PR_Socket(domain, SOCK_STREAM, protocol); + + sockOpt.option = PR_SockOpt_Reuseaddr; + sockOpt.value.reuse_addr = PR_TRUE; + rv = PR_SetSocketOption(server->listener, &sockOpt); + TEST_ASSERT(PR_SUCCESS == rv); + + memset(&serverAddress, 0, sizeof(serverAddress)); + if (PR_AF_INET6 != domain) + rv = PR_InitializeNetAddr(PR_IpAddrAny, DEFAULT_PORT, &serverAddress); + else + rv = PR_SetNetAddr(PR_IpAddrAny, PR_AF_INET6, DEFAULT_PORT, + &serverAddress); + rv = PR_Bind(server->listener, &serverAddress); + TEST_ASSERT(PR_SUCCESS == rv); + + rv = PR_Listen(server->listener, server->backlog); + TEST_ASSERT(PR_SUCCESS == rv); + + server->started = PR_IntervalNow(); + TimeOfDayMessage("Server started at", me); + + PR_Lock(server->ml); + server->state = cs_run; + PR_NotifyCondVar(server->stateChange); + PR_Unlock(server->ml); + + /* + ** Create the first worker (actually, a thread that accepts + ** connections and then processes the work load as needed). + ** From this point on, additional worker threads are created + ** as they are needed by existing worker threads. + */ + rv = CreateWorker(server, &server->pool); + TEST_ASSERT(PR_SUCCESS == rv); + + /* + ** From here on this thread is merely hanging around as the contact + ** point for the main test driver. It's just waiting for the driver + ** to declare the test complete. + */ + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tServer(0x%p): waiting for state change\n", me)); + + PR_Lock(server->ml); + while ((cs_run == server->state) && !Aborted(rv)) + { + rv = PR_WaitCondVar(server->stateChange, PR_INTERVAL_NO_TIMEOUT); + } + PR_Unlock(server->ml); + PR_ClearInterrupt(); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_INFO, + ("\tServer(0x%p): shutting down workers\n", me)); + + /* + ** Get all the worker threads to exit. They know how to + ** clean up after themselves, so this is just a matter of + ** waiting for clorine in the pool to take effect. During + ** this stage we're ignoring interrupts. + */ + server->workers.minimum = server->workers.maximum = 0; + + PR_Lock(server->ml); + while (!PR_CLIST_IS_EMPTY(&server->list)) + { + PRCList *head = PR_LIST_HEAD(&server->list); + CSWorker_t *worker = (CSWorker_t*)head; + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("\tServer(0x%p): interrupting worker(0x%p)\n", me, worker)); + rv = PR_Interrupt(worker->thread); + TEST_ASSERT(PR_SUCCESS == rv); + PR_REMOVE_AND_INIT_LINK(head); + } + + while (server->pool.workers > 0) + { + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("\tServer(0x%p): waiting for %u workers to exit\n", + me, server->pool.workers)); + (void)PR_WaitCondVar(server->pool.exiting, PR_INTERVAL_NO_TIMEOUT); + } + + server->state = cs_exit; + PR_NotifyCondVar(server->stateChange); + PR_Unlock(server->ml); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_ALWAYS, + ("\tServer(0x%p): stopped after %u operations and %u bytes\n", + me, server->operations, server->bytesTransferred)); + + if (NULL != server->listener) PR_Close(server->listener); + server->stopped = PR_IntervalNow(); + +} /* Server */ + +static void WaitForCompletion(PRIntn execution) +{ + while (execution > 0) + { + PRIntn dally = (execution > 30) ? 30 : execution; + PR_Sleep(PR_SecondsToInterval(dally)); + if (pthread_stats) PT_FPrintStats(debug_out, "\nPThread Statistics\n"); + execution -= dally; + } +} /* WaitForCompletion */ + +static void Help(void) +{ + PR_fprintf(debug_out, "cltsrv test program usage:\n"); + PR_fprintf(debug_out, "\t-a <n> threads allowed in accept (5)\n"); + PR_fprintf(debug_out, "\t-b <n> backlock for listen (5)\n"); + PR_fprintf(debug_out, "\t-c <threads> number of clients to create (1)\n"); + PR_fprintf(debug_out, "\t-f <low> low water mark for fd caching (0)\n"); + PR_fprintf(debug_out, "\t-F <high> high water mark for fd caching (0)\n"); + PR_fprintf(debug_out, "\t-w <threads> minimal number of server threads (1)\n"); + PR_fprintf(debug_out, "\t-W <threads> maximum number of server threads (1)\n"); + PR_fprintf(debug_out, "\t-e <seconds> duration of the test in seconds (10)\n"); + PR_fprintf(debug_out, "\t-s <string> dsn name of server (localhost)\n"); + PR_fprintf(debug_out, "\t-G use GLOBAL threads (LOCAL)\n"); + PR_fprintf(debug_out, "\t-X use XTP as transport (TCP)\n"); + PR_fprintf(debug_out, "\t-6 Use IPv6 (IPv4)\n"); + PR_fprintf(debug_out, "\t-v verbosity (accumulative) (0)\n"); + PR_fprintf(debug_out, "\t-p pthread statistics (FALSE)\n"); + PR_fprintf(debug_out, "\t-d debug mode (FALSE)\n"); + PR_fprintf(debug_out, "\t-h this message\n"); +} /* Help */ + +static Verbosity IncrementVerbosity(void) +{ + PRIntn verboge = (PRIntn)verbosity + 1; + return (Verbosity)verboge; +} /* IncrementVerbosity */ + +PRIntn main(PRIntn argc, char** argv) +{ + PRUintn index; + PRBool boolean; + CSClient_t *client; + PRStatus rv, joinStatus; + CSServer_t *server = NULL; + + PRUintn backlog = DEFAULT_BACKLOG; + PRUintn clients = DEFAULT_CLIENTS; + const char *serverName = DEFAULT_SERVER; + PRBool serverIsLocal = PR_TRUE; + PRUintn accepting = ALLOWED_IN_ACCEPT; + PRUintn workersMin = DEFAULT_WORKERS_MIN; + PRUintn workersMax = DEFAULT_WORKERS_MAX; + PRIntn execution = DEFAULT_EXECUTION_TIME; + PRIntn low = DEFAULT_LOW, high = DEFAULT_HIGH; + + /* + * -G use global threads + * -a <n> threads allowed in accept + * -b <n> backlock for listen + * -c <threads> number of clients to create + * -f <low> low water mark for caching FDs + * -F <high> high water mark for caching FDs + * -w <threads> minimal number of server threads + * -W <threads> maximum number of server threads + * -e <seconds> duration of the test in seconds + * -s <string> dsn name of server (implies no server here) + * -v verbosity + */ + + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "GX6b:a:c:f:F:w:W:e:s:vdhp"); + + debug_out = PR_GetSpecialFD(PR_StandardError); + + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'G': /* use global threads */ + thread_scope = PR_GLOBAL_THREAD; + break; + case 'X': /* use XTP as transport */ + protocol = 36; + break; + case '6': /* Use IPv6 */ + domain = PR_AF_INET6; + break; + case 'a': /* the value for accepting */ + accepting = atoi(opt->value); + break; + case 'b': /* the value for backlock */ + backlog = atoi(opt->value); + break; + case 'c': /* number of client threads */ + clients = atoi(opt->value); + break; + case 'f': /* low water fd cache */ + low = atoi(opt->value); + break; + case 'F': /* low water fd cache */ + high = atoi(opt->value); + break; + case 'w': /* minimum server worker threads */ + workersMin = atoi(opt->value); + break; + case 'W': /* maximum server worker threads */ + workersMax = atoi(opt->value); + break; + case 'e': /* program execution time in seconds */ + execution = atoi(opt->value); + break; + case 's': /* server's address */ + serverName = opt->value; + break; + case 'v': /* verbosity */ + verbosity = IncrementVerbosity(); + break; + case 'd': /* debug mode */ + debug_mode = PR_TRUE; + break; + case 'p': /* pthread mode */ + pthread_stats = PR_TRUE; + break; + case 'h': + default: + Help(); + return 2; + } + } + PL_DestroyOptState(opt); + + if (0 != PL_strcmp(serverName, DEFAULT_SERVER)) serverIsLocal = PR_FALSE; + if (0 == execution) execution = DEFAULT_EXECUTION_TIME; + if (0 == workersMax) workersMax = DEFAULT_WORKERS_MAX; + if (0 == workersMin) workersMin = DEFAULT_WORKERS_MIN; + if (0 == accepting) accepting = ALLOWED_IN_ACCEPT; + if (0 == backlog) backlog = DEFAULT_BACKLOG; + + if (workersMin > accepting) accepting = workersMin; + + PR_STDIO_INIT(); + TimeOfDayMessage("Client/Server started at", PR_CurrentThread()); + + cltsrv_log_file = PR_NewLogModule("cltsrv_log"); + MY_ASSERT(NULL != cltsrv_log_file); + boolean = PR_SetLogFile("cltsrv.log"); + MY_ASSERT(boolean); + +#ifdef XP_MAC + debug_mode = PR_TRUE; +#endif + + rv = PR_SetFDCacheSize(low, high); + PR_ASSERT(PR_SUCCESS == rv); + + if (serverIsLocal) + { + /* Establish the server */ + TEST_LOG( + cltsrv_log_file, TEST_LOG_INFO, + ("main(0x%p): starting server\n", PR_CurrentThread())); + + server = PR_NEWZAP(CSServer_t); + PR_INIT_CLIST(&server->list); + server->state = cs_init; + server->ml = PR_NewLock(); + server->backlog = backlog; + server->port = DEFAULT_PORT; + server->workers.minimum = workersMin; + server->workers.maximum = workersMax; + server->workers.accepting = accepting; + server->stateChange = PR_NewCondVar(server->ml); + server->pool.exiting = PR_NewCondVar(server->ml); + server->pool.acceptComplete = PR_NewCondVar(server->ml); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("main(0x%p): creating server thread\n", PR_CurrentThread())); + + server->thread = PR_CreateThread( + PR_USER_THREAD, Server, server, PR_PRIORITY_HIGH, + thread_scope, PR_JOINABLE_THREAD, 0); + TEST_ASSERT(NULL != server->thread); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("main(0x%p): waiting for server init\n", PR_CurrentThread())); + + PR_Lock(server->ml); + while (server->state == cs_init) + PR_WaitCondVar(server->stateChange, PR_INTERVAL_NO_TIMEOUT); + PR_Unlock(server->ml); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("main(0x%p): server init complete (port #%d)\n", + PR_CurrentThread(), server->port)); + } + + if (clients != 0) + { + /* Create all of the clients */ + PRHostEnt host; + char buffer[BUFFER_SIZE]; + client = (CSClient_t*)PR_CALLOC(clients * sizeof(CSClient_t)); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_VERBOSE, + ("main(0x%p): creating %d client threads\n", + PR_CurrentThread(), clients)); + + if (!serverIsLocal) + { + rv = PR_GetHostByName(serverName, buffer, BUFFER_SIZE, &host); + if (PR_SUCCESS != rv) + { + PL_FPrintError(PR_STDERR, "PR_GetHostByName"); + return 2; + } + } + + for (index = 0; index < clients; ++index) + { + client[index].state = cs_init; + client[index].ml = PR_NewLock(); + if (serverIsLocal) + { + if (PR_AF_INET6 != domain) + (void)PR_InitializeNetAddr( + PR_IpAddrLoopback, DEFAULT_PORT, + &client[index].serverAddress); + else + rv = PR_SetNetAddr(PR_IpAddrLoopback, PR_AF_INET6, + DEFAULT_PORT, &client[index].serverAddress); + } + else + { + (void)PR_EnumerateHostEnt( + 0, &host, DEFAULT_PORT, &client[index].serverAddress); + } + client[index].stateChange = PR_NewCondVar(client[index].ml); + TEST_LOG( + cltsrv_log_file, TEST_LOG_INFO, + ("main(0x%p): creating client threads\n", PR_CurrentThread())); + client[index].thread = PR_CreateThread( + PR_USER_THREAD, Client, &client[index], PR_PRIORITY_NORMAL, + thread_scope, PR_JOINABLE_THREAD, 0); + TEST_ASSERT(NULL != client[index].thread); + PR_Lock(client[index].ml); + while (cs_init == client[index].state) + PR_WaitCondVar(client[index].stateChange, PR_INTERVAL_NO_TIMEOUT); + PR_Unlock(client[index].ml); + } + } + + /* Then just let them go at it for a bit */ + TEST_LOG( + cltsrv_log_file, TEST_LOG_ALWAYS, + ("main(0x%p): waiting for execution interval (%d seconds)\n", + PR_CurrentThread(), execution)); + + WaitForCompletion(execution); + + TimeOfDayMessage("Shutting down", PR_CurrentThread()); + + if (clients != 0) + { + for (index = 0; index < clients; ++index) + { + TEST_LOG(cltsrv_log_file, TEST_LOG_STATUS, + ("main(0x%p): notifying client(0x%p) to stop\n", + PR_CurrentThread(), client[index].thread)); + + PR_Lock(client[index].ml); + if (cs_run == client[index].state) + { + client[index].state = cs_stop; + PR_Interrupt(client[index].thread); + while (cs_stop == client[index].state) + PR_WaitCondVar( + client[index].stateChange, PR_INTERVAL_NO_TIMEOUT); + } + PR_Unlock(client[index].ml); + + TEST_LOG(cltsrv_log_file, TEST_LOG_VERBOSE, + ("main(0x%p): joining client(0x%p)\n", + PR_CurrentThread(), client[index].thread)); + + joinStatus = PR_JoinThread(client[index].thread); + TEST_ASSERT(PR_SUCCESS == joinStatus); + PR_DestroyCondVar(client[index].stateChange); + PR_DestroyLock(client[index].ml); + } + PR_DELETE(client); + } + + if (NULL != server) + { + /* All clients joined - retrieve the server */ + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("main(0x%p): notifying server(0x%p) to stop\n", + PR_CurrentThread(), server->thread)); + + PR_Lock(server->ml); + server->state = cs_stop; + PR_Interrupt(server->thread); + while (cs_exit != server->state) + PR_WaitCondVar(server->stateChange, PR_INTERVAL_NO_TIMEOUT); + PR_Unlock(server->ml); + + TEST_LOG( + cltsrv_log_file, TEST_LOG_NOTICE, + ("main(0x%p): joining server(0x%p)\n", + PR_CurrentThread(), server->thread)); + joinStatus = PR_JoinThread(server->thread); + TEST_ASSERT(PR_SUCCESS == joinStatus); + + PR_DestroyCondVar(server->stateChange); + PR_DestroyCondVar(server->pool.exiting); + PR_DestroyCondVar(server->pool.acceptComplete); + PR_DestroyLock(server->ml); + PR_DELETE(server); + } + + TEST_LOG( + cltsrv_log_file, TEST_LOG_ALWAYS, + ("main(0x%p): test complete\n", PR_CurrentThread())); + + PT_FPrintStats(debug_out, "\nPThread Statistics\n"); + + TimeOfDayMessage("Test exiting at", PR_CurrentThread()); + PR_Cleanup(); + return 0; +} /* main */ + +/* cltsrv.c */ |