diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/y2ktmo.c')
-rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/y2ktmo.c | 546 |
1 files changed, 546 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/y2ktmo.c b/src/libs/xpcom18a4/nsprpub/pr/tests/y2ktmo.c new file mode 100644 index 00000000..a37ae072 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/y2ktmo.c @@ -0,0 +1,546 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1999-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/* + * Test: y2ktmo + * + * Description: + * This test tests the interval time facilities in NSPR for Y2K + * compliance. All the functions that take a timeout argument + * are tested: PR_Sleep, socket I/O (PR_Accept is taken as a + * representative), PR_Poll, PR_WaitCondVar, PR_Wait, and + * PR_CWait. A thread of each thread scope (local, global, and + * global bound) is created to call each of these functions. + * The test should be started at the specified number of seconds + * (called the lead time) before a Y2K rollover test date. The + * timeout values for these threads will span over the rollover + * date by at least the specified number of seconds. For + * example, if the lead time is 5 seconds, the test should + * be started at time (D - 5), where D is a rollover date, and + * the threads will time out at or after time (D + 5). The + * timeout values for the threads are spaced one second apart. + * + * When a thread times out, it calls PR_IntervalNow() to verify + * that it did wait for the specified time. In addition, it + * calls a platform-native function to verify the actual elapsed + * time again, to rule out the possibility that PR_IntervalNow() + * is broken. We allow the actual elapsed time to deviate from + * the specified timeout by a certain tolerance (in milliseconds). + */ + +#include "nspr.h" +#include "plgetopt.h" + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#if defined(XP_UNIX) +#include <sys/time.h> /* for gettimeofday */ +#endif +#if defined(WIN32) +#include <sys/types.h> +#include <sys/timeb.h> /* for _ftime */ +#endif + +#define DEFAULT_LEAD_TIME_SECS 5 +#define DEFAULT_TOLERANCE_MSECS 500 + +static PRBool debug_mode = PR_FALSE; +static PRInt32 lead_time_secs = DEFAULT_LEAD_TIME_SECS; +static PRInt32 tolerance_msecs = DEFAULT_TOLERANCE_MSECS; +static PRIntervalTime start_time; +static PRIntervalTime tolerance; + +#if defined(XP_UNIX) +static struct timeval start_time_tv; +#endif +#if defined(WIN32) +static struct _timeb start_time_tb; +#endif + +static void SleepThread(void *arg) +{ + PRIntervalTime timeout = (PRIntervalTime) arg; + PRIntervalTime elapsed; +#if defined(XP_UNIX) || defined(WIN32) + PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout); + PRInt32 elapsed_msecs; +#endif +#if defined(XP_UNIX) + struct timeval end_time_tv; +#endif +#if defined(WIN32) + struct _timeb end_time_tb; +#endif + + if (PR_Sleep(timeout) == PR_FAILURE) { + fprintf(stderr, "PR_Sleep failed\n"); + exit(1); + } + elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time); + if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#if defined(XP_UNIX) + gettimeofday(&end_time_tv, NULL); + elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec) + + (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000; +#endif +#if defined(WIN32) + _ftime(&end_time_tb); + elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time) + + (end_time_tb.millitm - start_time_tb.millitm); +#endif +#if defined(XP_UNIX) || defined(WIN32) + if (elapsed_msecs + tolerance_msecs < timeout_msecs + || elapsed_msecs > timeout_msecs + tolerance_msecs) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#endif + if (debug_mode) { + fprintf(stderr, "Sleep thread (scope %d) done\n", + PR_GetThreadScope(PR_GetCurrentThread())); + } +} + +static void AcceptThread(void *arg) +{ + PRIntervalTime timeout = (PRIntervalTime) arg; + PRIntervalTime elapsed; +#if defined(XP_UNIX) || defined(WIN32) + PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout); + PRInt32 elapsed_msecs; +#endif +#if defined(XP_UNIX) + struct timeval end_time_tv; +#endif +#if defined(WIN32) + struct _timeb end_time_tb; +#endif + PRFileDesc *sock; + PRNetAddr addr; + PRFileDesc *accepted; + + sock = PR_NewTCPSocket(); + if (sock == NULL) { + fprintf(stderr, "PR_NewTCPSocket failed\n"); + exit(1); + } + memset(&addr, 0, sizeof(addr)); + addr.inet.family = PR_AF_INET; + addr.inet.port = 0; + addr.inet.ip = PR_htonl(PR_INADDR_ANY); + if (PR_Bind(sock, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_Bind failed\n"); + exit(1); + } + if (PR_Listen(sock, 5) == PR_FAILURE) { + fprintf(stderr, "PR_Listen failed\n"); + exit(1); + } + accepted = PR_Accept(sock, NULL, timeout); + if (accepted != NULL || PR_GetError() != PR_IO_TIMEOUT_ERROR) { + fprintf(stderr, "PR_Accept did not time out\n"); + exit(1); + } + elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time); + if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#if defined(XP_UNIX) + gettimeofday(&end_time_tv, NULL); + elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec) + + (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000; +#endif +#if defined(WIN32) + _ftime(&end_time_tb); + elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time) + + (end_time_tb.millitm - start_time_tb.millitm); +#endif +#if defined(XP_UNIX) || defined(WIN32) + if (elapsed_msecs + tolerance_msecs < timeout_msecs + || elapsed_msecs > timeout_msecs + tolerance_msecs) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#endif + if (PR_Close(sock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } + if (debug_mode) { + fprintf(stderr, "Accept thread (scope %d) done\n", + PR_GetThreadScope(PR_GetCurrentThread())); + } +} + +static void PollThread(void *arg) +{ + PRIntervalTime timeout = (PRIntervalTime) arg; + PRIntervalTime elapsed; +#if defined(XP_UNIX) || defined(WIN32) + PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout); + PRInt32 elapsed_msecs; +#endif +#if defined(XP_UNIX) + struct timeval end_time_tv; +#endif +#if defined(WIN32) + struct _timeb end_time_tb; +#endif + PRFileDesc *sock; + PRNetAddr addr; + PRPollDesc pd; + PRIntn rv; + + sock = PR_NewTCPSocket(); + if (sock == NULL) { + fprintf(stderr, "PR_NewTCPSocket failed\n"); + exit(1); + } + memset(&addr, 0, sizeof(addr)); + addr.inet.family = PR_AF_INET; + addr.inet.port = 0; + addr.inet.ip = PR_htonl(PR_INADDR_ANY); + if (PR_Bind(sock, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_Bind failed\n"); + exit(1); + } + if (PR_Listen(sock, 5) == PR_FAILURE) { + fprintf(stderr, "PR_Listen failed\n"); + exit(1); + } + pd.fd = sock; + pd.in_flags = PR_POLL_READ; + rv = PR_Poll(&pd, 1, timeout); + if (rv != 0) { + fprintf(stderr, "PR_Poll did not time out\n"); + exit(1); + } + elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time); + if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#if defined(XP_UNIX) + gettimeofday(&end_time_tv, NULL); + elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec) + + (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000; +#endif +#if defined(WIN32) + _ftime(&end_time_tb); + elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time) + + (end_time_tb.millitm - start_time_tb.millitm); +#endif +#if defined(XP_UNIX) || defined(WIN32) + if (elapsed_msecs + tolerance_msecs < timeout_msecs + || elapsed_msecs > timeout_msecs + tolerance_msecs) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#endif + if (PR_Close(sock) == PR_FAILURE) { + fprintf(stderr, "PR_Close failed\n"); + exit(1); + } + if (debug_mode) { + fprintf(stderr, "Poll thread (scope %d) done\n", + PR_GetThreadScope(PR_GetCurrentThread())); + } +} + +static void WaitCondVarThread(void *arg) +{ + PRIntervalTime timeout = (PRIntervalTime) arg; + PRIntervalTime elapsed; +#if defined(XP_UNIX) || defined(WIN32) + PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout); + PRInt32 elapsed_msecs; +#endif +#if defined(XP_UNIX) + struct timeval end_time_tv; +#endif +#if defined(WIN32) + struct _timeb end_time_tb; +#endif + PRLock *ml; + PRCondVar *cv; + + ml = PR_NewLock(); + if (ml == NULL) { + fprintf(stderr, "PR_NewLock failed\n"); + exit(1); + } + cv = PR_NewCondVar(ml); + if (cv == NULL) { + fprintf(stderr, "PR_NewCondVar failed\n"); + exit(1); + } + PR_Lock(ml); + PR_WaitCondVar(cv, timeout); + PR_Unlock(ml); + elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time); + if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#if defined(XP_UNIX) + gettimeofday(&end_time_tv, NULL); + elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec) + + (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000; +#endif +#if defined(WIN32) + _ftime(&end_time_tb); + elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time) + + (end_time_tb.millitm - start_time_tb.millitm); +#endif +#if defined(XP_UNIX) || defined(WIN32) + if (elapsed_msecs + tolerance_msecs < timeout_msecs + || elapsed_msecs > timeout_msecs + tolerance_msecs) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#endif + PR_DestroyCondVar(cv); + PR_DestroyLock(ml); + if (debug_mode) { + fprintf(stderr, "wait cond var thread (scope %d) done\n", + PR_GetThreadScope(PR_GetCurrentThread())); + } +} + +static void WaitMonitorThread(void *arg) +{ + PRIntervalTime timeout = (PRIntervalTime) arg; + PRIntervalTime elapsed; +#if defined(XP_UNIX) || defined(WIN32) + PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout); + PRInt32 elapsed_msecs; +#endif +#if defined(XP_UNIX) + struct timeval end_time_tv; +#endif +#if defined(WIN32) + struct _timeb end_time_tb; +#endif + PRMonitor *mon; + + mon = PR_NewMonitor(); + if (mon == NULL) { + fprintf(stderr, "PR_NewMonitor failed\n"); + exit(1); + } + PR_EnterMonitor(mon); + PR_Wait(mon, timeout); + PR_ExitMonitor(mon); + elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time); + if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#if defined(XP_UNIX) + gettimeofday(&end_time_tv, NULL); + elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec) + + (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000; +#endif +#if defined(WIN32) + _ftime(&end_time_tb); + elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time) + + (end_time_tb.millitm - start_time_tb.millitm); +#endif +#if defined(XP_UNIX) || defined(WIN32) + if (elapsed_msecs + tolerance_msecs < timeout_msecs + || elapsed_msecs > timeout_msecs + tolerance_msecs) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#endif + PR_DestroyMonitor(mon); + if (debug_mode) { + fprintf(stderr, "wait monitor thread (scope %d) done\n", + PR_GetThreadScope(PR_GetCurrentThread())); + } +} + +static void WaitCMonitorThread(void *arg) +{ + PRIntervalTime timeout = (PRIntervalTime) arg; + PRIntervalTime elapsed; +#if defined(XP_UNIX) || defined(WIN32) + PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout); + PRInt32 elapsed_msecs; +#endif +#if defined(XP_UNIX) + struct timeval end_time_tv; +#endif +#if defined(WIN32) + struct _timeb end_time_tb; +#endif + int dummy; + + PR_CEnterMonitor(&dummy); + PR_CWait(&dummy, timeout); + PR_CExitMonitor(&dummy); + elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time); + if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#if defined(XP_UNIX) + gettimeofday(&end_time_tv, NULL); + elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec) + + (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000; +#endif +#if defined(WIN32) + _ftime(&end_time_tb); + elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time) + + (end_time_tb.millitm - start_time_tb.millitm); +#endif +#if defined(XP_UNIX) || defined(WIN32) + if (elapsed_msecs + tolerance_msecs < timeout_msecs + || elapsed_msecs > timeout_msecs + tolerance_msecs) { + fprintf(stderr, "timeout wrong\n"); + exit(1); + } +#endif + if (debug_mode) { + fprintf(stderr, "wait cached monitor thread (scope %d) done\n", + PR_GetThreadScope(PR_GetCurrentThread())); + } +} + +typedef void (*NSPRThreadFunc)(void*); + +static NSPRThreadFunc threadFuncs[] = { + SleepThread, AcceptThread, PollThread, + WaitCondVarThread, WaitMonitorThread, WaitCMonitorThread}; + +static PRThreadScope threadScopes[] = { + PR_LOCAL_THREAD, PR_GLOBAL_THREAD, PR_GLOBAL_BOUND_THREAD}; + +static void Help(void) +{ + fprintf(stderr, "y2ktmo test program usage:\n"); + fprintf(stderr, "\t-d debug mode (FALSE)\n"); + fprintf(stderr, "\t-l <secs> lead time (%d)\n", + DEFAULT_LEAD_TIME_SECS); + fprintf(stderr, "\t-t <msecs> tolerance (%d)\n", + DEFAULT_TOLERANCE_MSECS); + fprintf(stderr, "\t-h this message\n"); +} /* Help */ + +int main(int argc, char **argv) +{ + PRThread **threads; + int num_thread_funcs = sizeof(threadFuncs)/sizeof(NSPRThreadFunc); + int num_thread_scopes = sizeof(threadScopes)/sizeof(PRThreadScope); + int i, j; + int idx; + PRInt32 secs; + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "dl:t:h"); + + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) { + if (PL_OPT_BAD == os) continue; + switch (opt->option) { + case 'd': /* debug mode */ + debug_mode = PR_TRUE; + break; + case 'l': /* lead time */ + lead_time_secs = atoi(opt->value); + break; + case 't': /* tolerance */ + tolerance_msecs = atoi(opt->value); + break; + case 'h': + default: + Help(); + return 2; + } + } + PL_DestroyOptState(opt); + + if (debug_mode) { + fprintf(stderr, "lead time: %d secs\n", lead_time_secs); + fprintf(stderr, "tolerance: %d msecs\n", tolerance_msecs); + } + + start_time = PR_IntervalNow(); +#if defined(XP_UNIX) + gettimeofday(&start_time_tv, NULL); +#endif +#if defined(WIN32) + _ftime(&start_time_tb); +#endif + tolerance = PR_MillisecondsToInterval(tolerance_msecs); + + threads = PR_Malloc( + num_thread_scopes * num_thread_funcs * sizeof(PRThread*)); + if (threads == NULL) { + fprintf(stderr, "PR_Malloc failed\n"); + exit(1); + } + + /* start to time out 5 seconds after a rollover date */ + secs = lead_time_secs + 5; + idx = 0; + for (i = 0; i < num_thread_scopes; i++) { + for (j = 0; j < num_thread_funcs; j++) { + threads[idx] = PR_CreateThread(PR_USER_THREAD, threadFuncs[j], + (void*)PR_SecondsToInterval(secs), PR_PRIORITY_NORMAL, + threadScopes[i], PR_JOINABLE_THREAD, 0); + if (threads[idx] == NULL) { + fprintf(stderr, "PR_CreateThread failed\n"); + exit(1); + } + secs++; + idx++; + } + } + for (idx = 0; idx < num_thread_scopes*num_thread_funcs; idx++) { + if (PR_JoinThread(threads[idx]) == PR_FAILURE) { + fprintf(stderr, "PR_JoinThread failed\n"); + exit(1); + } + } + PR_Free(threads); + printf("PASS\n"); + return 0; +} |